LG 65UC970T Owner's Manual
OWNER’S MANUAL
LED TV*
* LG LED TVs are LCD TVs with LED backlighting.
Click! User Guide
Please read this manual carefully before operating your set and retain it
for future reference.
49UB850T
55UB850T
60UB850T
65UB930T
65UB950T
*MFL67987072*
55UC970T
65UC970T
79UG880T
65UB980T
79UB980T
84UB980T
98UB980T
P/NO : MFL67987072 (1504-REV06)
105UC9T
www.lg.com
2
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).
ENGLISH
ENG
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING
If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
Do not press strongly upon the panel with
a hand or a sharp object such as a nail,
pencil or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
Power Supply
3
Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Use only attachments/accessories specified
by the manufacturer.
Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner’s
manual to be certain. Do not connect too
many appliances to the same AC power
outlet as this could result in fire or electric
shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
service. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance. Do not move the TV with
the power cord plugged in. Do not use a
damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug
the TV.
Warning
- To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
ENGENGLISH
Do not stick metal objects or any other
conductive material into the power cord.
Do not touch the end of the power cord
while it is plugged in.
Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.
Do not expose to dripping or splashing
and do not place objects filled with liquids,
such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).
4
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
ENG
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock (i.e. a
TV with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit
by connecting it to telephone wires, lightning
rods, or gas pipes.
Short-circuit
As long as this unit is connected to the AC
Power Supply
Breaker
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur. Be sure the antenna
system is grounded so as to provide some
protection against voltage surges and builtup static charges. Section 810 of the National
Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements for the
grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenna Lead in Wire
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Cleaning
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.
Moving
Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Ventilation
Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.
If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
Keep the product away from direct sunlight.
Never touch this apparatus or antenna
during a thunder or lightning storm.
When mounting a TV on the wall, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
to fall into the product, and do not drop
anything onto the screen.
DISCONNECTING THE DEVICE FROM THE
MAIN POWER
The power plug is the disconnecting device.
In case of an emergency, the power plug
must remain readily accessible.
Batteries
Store the accessories (battery, etc.) in a safe
location out of the reach of children.
This apparatus use batteries. In your
community there might be regulations
that require you to dispose of these
batteries properly due to environmental
considerations. Please contact your
local authorities for disposal or recycling
information.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or allow
the batteries to overheat.
Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper).This may
result in product malfunction.
IMPORTANT SAFETY INSTRUCTIONS
5
Dot Defect
The Plasma or LCD panel is a high
technology product with resolution of
two million to six million pixels. In a very
few cases, you could see fine dots on the
screen while you’re viewing the TV. Those
dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This
noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a highspeed switching circuit, which supplies
a large amount of current to operate a
product. It varies depending upon the
product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation
openings. When watching the TV for
a long period, the ventilation openings
may become hot. This does not affect
the performance of the product or cause
defects in the product.
Do not install this product on a wall if it
could be exposed to oil or oil mist. This
may damage the product and cause it to
fall.
If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
Preventing Image burn or Burn-in on
your TV screen
If a fixed image displays on the TV screen
for a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is image burn or burn-in
and not covered by the warranty.
Watching the TV for a long period of time
with the screen ratio of 4:3 (for the 21:9
model, 4:3 and 16:9) may cause image
burn-in on the letterboxed area of the
screen. When watching the TV for a long
period of time, please use the default
screen ratio of 16:9 or 21:9 depending
upon the product.
Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
ENGENGLISH
6
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D Imaging
WARNING
Viewing Environment
Viewing Time
-
When watching 3D contents, take 5 to
15 minute breaks every hour. Viewing 3D
contents for a long period of time may cause
headache, dizziness, fatigue, or eye strain.
Those that have a photosensitive seizure or
chronic illness
Some users may experience a seizure or
other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
Do not watch 3D videos if you feel nausea,
are pregnant, and/ or have a chronic illness
ENGLISH
ENG
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
3D Contents are not recommended to
those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.
If you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
If your eyesight varies between your right
and left eye, put on your glasses before
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
Do not watch 3D contents when you feel
fatigue from lack of sleep, overwork, or
drinking.
When these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image,
eyestrain, or fatigue.
CAUTION
Viewing Environment
Viewing Distance
-
Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further from the TV.
Viewing Age
Infants / Children
- Usage/ Viewing 3D contents for children
under the age of 5 is prohibited.
- Children under the age of 10 may overreact
and become overly excited because their
vision is in development (for example: trying
to touch the screen or trying to jump into it.
Special monitoring and extra attention are
required for children watching 3D contents.
- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.
Teenagers
- Teenagers may be stimulated to light
coming from 3D videos. Advise them not
to watch 3D videos for a long time when
they are tired.
Elderly
- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses.
Otherwise, you may not be able to view 3D
videos properly.
Do not use 3D glasses instead of your
normal glasses, sunglasses or protective
goggles.
Using modified 3D glasses may cause eye
strain or image distortion.
Do not keep your 3D glasses in extremely
high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.
LICENSES
LICENSES / OPEN SOURCE SOFTWARE NOTICE
7
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com
.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping, and handling) upon email
request to
purchased the product.
opensource@lge.com.
http://opensource.lge.com.
This offer is valid for three (3) years from the date on which you
ENGENGLISH
8
TABLE OF CONTENTS
TABLE OF CONTENTS
2 IMPORTANT SAFETY
INSTRUCTIONS
6 Viewing 3D Imaging
7 LICENSES
7 OPEN SOURCE SOFTWARE
NOTICE
8 TABLE OF CONTENTS
9 INSTALLATION PROCEDURE
9 ASSEMBLING AND PREPARING
ENGLISH
9 Unpacking
ENG
12 Optional Extras
13 Parts and Buttons
15 - Using the joystick button
16 Lifting and Moving the TV
16 Setting up the TV
16 - Attaching the Stand
21 - Mounting on a Table
22 - Mounting On a Wall
24 - Using Sliding Speaker
25 - Attaching the AV Port Cover
26 - Tidying Cables
27 Using Built-in Camera
28 - Preparing Built-in Camera
28 - Names of Parts for the Built-In Camera
28 - Checking the Camera’s Shooting
Range
NOTE
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may
differ slightly from that shown in this
manual.
The available menus and options may
differ from the input source or product
model that you are using.
New features may be added to this TV in
the future.
29 MAKING CONNECTIONS
29 Connecting to an Antenna or Cable
30 Connecting to a HD receiver, DVD
Player, or VCR
30 - HDMI Connection
31 - DVI to HDMI Connection
32 - Connecting to a Mobile Phone
33 - Component Connection
34 - Composite Connection
35 Connecting to a PC
35 - HDMI Connection or DVI to HDMI
Connection
37 Connecting to an Audio System
37 - Digital Optical Audio Connection
38 Connecting Headphones
39 Connecting a USB Drive
40 MAGIC REMOTE FUNCTIONS
41 Registering Magic Remote
41 How to Use Magic Remote
41 Precautions to Take When Using the
Magic Remote
42 USING THE USER GUIDE
43 SPECIFICATIONS
46 MAINTENANCE
46 Cleaning Your TV
46 - Screen, Frame, Cabinet, and Stand
46 - Power Cord
47 TROUBLESHOOTING
47 EXTERNAL CONTROL DEVICE
SETUP
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
Open the package and make sure all the accessories are included.
1
Attach the stand to the TV set.
2
Connect an external device to the TV set.
3
Make sure the network connection is available.
4
You can use the TV network functions only when the network connection is made.
When the TV is turned on for the first time after being shipped from the factory, initialization of
*
the TV may take approximately one minute.
ASSEMBLING AND PREPARING
Unpacking
9
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
The screens of some models are covered by a thin film. Do not remove it.
NOTE
The items supplied with your product may vary depending
upon the model.
Product specifications or contents of this manual may be
changed without prior notice due to upgrade of product
functions.
For an optimal connection, HDMI cables and USB devices
should have bezels less than 10 mm thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable
or USB FLASH DRIVE does not fit into your TV’s USB port.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable,
the screen may not display or a connection error may occur.
Recommended HDMI cable types (3 m or less)
- High-Speed HDMI
- High-Speed HDMI®/TM cable with Ethernet
®/TM
cable
A
B
*A 10 mm
*B 18 mm
B
A
ENGENGLISH
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Magic Remote,
Batteries (AA)
(See page 40.)
Cable Holder
(Depending upon
model)
(See page 26)
Composite Video
Cable
(See pages 33 and 34.)
(For 55/65UC970T) (For 79UG880T) (For 98UB980T) (For 49/55/60UB850T,
Owner’s Manual
Power Cord
(Depending upon
model)
Component Video
Cable
(See page 33.)
HDMI cable
(Depending upon
model)
(See pages 30 and 35.)
Cinema 3D
Glasses
The number of
3D glasses may
differ depending
upon the model or
country.
(Depending upon
model)
(For 49/55/60UB850T,
65UB930T, 65UB950T)
Stand Base, Stand
Body
(See page 17.)
Video call camera
(Depending upon
model)
Dual play glasses
(Depending upon
model)
(For 65/79/84UB980T)
Stand Base
(See page 18.)
65UB930T, 65UB950T)
Stand Base, Stand
Body
(See page 20.)
Stand Base, Stand
Body
(See page 20.)
Stand Base
(See page 19.)
Stand Screws
8 EA, M4 x L20
(See page 17.)
ASSEMBLING AND PREPARING
(For 65UB980T) (For 79/84UB980T) (For 55/65UC970T) (For 79UG880T)
11
Stand Screws
4 EA, M6 x L47
(See page 18.)
(For 84UB980T) (For UB980T series) (For 49/55/60UB850T,
Insulation Holder
4 EA
(See page 18.)
(For 98UB980T) (For 98UB980T) (For 55/65UC970T,
Cable Management
1 EA
(See page 26.)
(For 105UC9T)
Stand Screws
4EA, M6 x L52
(See page 18.)
Wrench
(See pages 18 and 19.)
Cable Management
1 EA
(See page 26.)
Stand Screws
4 EA, M4 x L10
4 EA, M4 x L20
(See page 20.)
65UB930T, 65UB950T)
Cable Management
2 EA
(See page 26.)
79UG880T)
Wall Mount Inner
Spacers
4 EA
(See page 23.)
Stand Screws
2 EA, M4 x L10
10 EA, M4 x L14
(See pages 20 and 21.)
(For 55/65UC970T)
Cable Management
2 EA
(See page 26.)
(For 98UB980T)
AV port cover/Screw
1 EA, M3 x L8
(See page 25.)
ENGENGLISH
AV port cover
(See page 25.)
12
ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.
ENGLISH
ENG
AN-MR500
Magic Remote
AN-VC5**
Video Call Camera
Compatibility
AN-MR500
Magic Remote
AG-F***
Cinema 3D Glasses
AG-F***DP
Dual Play Glasses
AN-VC5**
Video Call Camera
LG Audio Device
AG-F***
Cinema 3D Glasses
LG Audio Device
49/55/60UB850T
65UB950T
55/65UC970T
79UG880T
65UB930T
AG-F***DP
Dual Play Glasses
• • •
• •
• •
• •
• • •
65/79/84/98UB980T
105UC9T
ASSEMBLING AND PREPARING
Parts and Buttons
(For 49/55/60UB850T) (For 65UB930T, 65UB950T)
13
Screen
Speakers
Remote Control Sensor
Intelligent Sensor
Power Indicator
(For 65/79UB980T)
Screen
Joystick Button
1
Built in Camera
2
Remote Control Sensor
Intelligent Sensor
(For 84UB980T)
Screen
Speakers
Power Indicator
Screen
1
Joystick Button
Built in Camera
3
ENGENGLISH
Speakers
Speakers
(For 79UB980T)
Remote Control Sensor
LG Logo Light
Intelligent Sensor
1
Joystick Button
Speakers
Speakers
2
Remote Control Sensor
Joystick Button
3
LG Logo Light
Intelligent Sensor
1
14
ASSEMBLING AND PREPARING
(For 55/65UC970T)
Remote Control Sensor
Intelligent Sensor
LG Logo Light
ENGLISH
ENG
(For 98UB980T)
Screen
Screen
Speakers
1
Joystick Button
Built in Camera
(For 79UG880T)
Remote Control Sensor
2
Intelligent Sensor
(For 105UC9T)
Screen
LG Logo Light
Speakers
1
Joystick Button
Built-in Camera
Screen
2
Sliding
Speaker
Remote Control Sensor
Intelligent Sensor
LG Logo Light
Joystick Button
1
3
Remote Control Sensor
Intelligent Sensor
Speakers
1
Joystick Button
Power Indicator
1. Intelligent Sensor - Adjusts the image quality and brightness based on the surrounding environment.
2. Joystick Button is located behind the screen of TV.
3. Joystick Button is located below the screen of TV.
CAUTION
Do not place any objects or body parts in area between TV Screen and Speaker Stand
assembly. It could cause personal injury or damage to product. (For 105UC9T)
3
ASSEMBLING AND PREPARING
NOTE
You can set the LG Logo Light or power indicator light to on or off by selecting
the main menu. (Depending upon model)
GENERAL
Using the joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic functions
15
in
Power On
Power Off
Volume Control
Channels Control
When the TV is turned off, place your finger on the joystick button, press it
once and release it.
When the TV is turned on, place your finger on the joystick button, press it
once for a few seconds and release it.
If you place your finger over the joystick button, move it left or right, you can
adjust the volume level.
If you place your finger over the joystick button, move it up or down, you can
scroll through the saved channels.
NOTE
• With your finger over the joystick button, move it up, down, left, or right, be careful not to press
the joystick button. If you press the joystick button first, you may not be able to adjust the volume
level and/or scroll through saved channels.
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the menu items ( , , ) moving the joystick button left or right.
TV OFF
CLOSE
INPUT
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
ENGENGLISH
16
ASSEMBLING AND PREPARING
Lifting and Moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
CAUTION
Avoid touching the screen at all times, as
this may result in damage to the screen.
Do not place the product on the floor with
its front facing down without padding.
Failure to do so may result in damage to
the screen.
It is recommended to move the TV in the
box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect
the power cord and all cables.
When holding the TV, the screen should
ENGLISH
ENG
face away from you to avoid damage.
Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
Use at least two people to move a
large TV.
When transporting the TV by hand,
hold the TV as shown in the following
illustration.
When handling the TV, be careful not to
damage the protruding joystick button.
When transporting the TV, do not expose
the TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
Setting up the TV
You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
CAUTION
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
Make sure that the screws are fastened
tightly. (If they are not fastened securely
enough, the TV may tilt forward after
being installed.)
Do not tighten the screws with too much
force; otherwise they may be damaged
and come loose later.
NOTE
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Remove the protective film from the stand
base and then attach the stand body to
the stand base. (For UC970T series)
ASSEMBLING AND PREPARING
1
2
17
(For 49/55/60UB850T, 65UB930T,
1
65UB950T)
Stand Body (L)
Stand Body (R)
Stand Base
(For 49/55/60UB850T)
2
4 EA
M4 x L20
(For 65UB930T, 65UB950T)
1
1
2
1
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2
Attach the stand to the TV using the lower
connection on the back of the TV.
3
ENGENGLISH
1
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2
Attach the stand to the TV using the lower
connection on the back of the TV.
4 EA
M4 x L20
18
ASSEMBLING AND PREPARING
(For 65/79/84UB980T)
1
2
ENGLISH
ENG
3
(For 65/79UB980T)
Stand Base
(For 84UB980T)
1
2
Wrench
M6 x L52
4 EA
CAUTION
Make sure that the screws are inserted
correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)
4 EA
(Insulation
Holder)
1
1
2
Wrench
(For 65UB980T)
M6 x L47
4 EA
(For 79UB980T)
M6 x L52
4 EA
1
2
(For 98UB980T)
1
2
1
2
Wrench
1
Mold
M6 x L47
6EA
ASSEMBLING AND PREPARING
2
3
19
Stand Base
ENGENGLISH
NOTE
The stand screws are already attached
at the back of the TV. Please use these
attached screw to assemble the TV and
stand. (For 98UB980T)
20
1
2
1
2
ASSEMBLING AND PREPARING
(For 55/65UC970T)
1
ENGLISH
ENG
2
3
Stand Body (L)
Stand Body (R)
Stand Base
M4 x L20
4 EA
M4 x L10
4 EA
(For 79UG880T)
1
Stand Body (R)
1
When attaching the stand to the TV set,
make sure to put the protective packaging
that is included in the product box on a table
or flat surface and then place the TV screen
facing down on the protective packaging.
2
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
3
Attach the stand to the TV using the lower
connection on the back of the TV.
Stand Body (L)
Stand Base
M4 x L14
6 EA
M4 x L10
2 EA
ASSEMBLING AND PREPARING
1
2
21
2
* Use at least two people to attach the stand to
the TV.
1
When attaching the stand to the TV set,
make sure to put the protective packaging
that is included in the product box on a table
or flat surface and then place the TV screen
facing down on the protective packaging.
2
Attach the stand to the TV using the upper
mounting hole on the back of the TV.
3
Attach the stand to the TV using the lower
connection on the back of the TV.
Mounting on a Table
Lift and tilt the TV into its upright position on
1
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
Connect the power cord to a wall outlet.
2
CAUTION
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
10 cm
10 cm
ENGENGLISH
3
M4 x L14
4 EA
22
ASSEMBLING AND PREPARING
Securing the TV to a Wall (optional)
(Depending upon model)
(For 98UB980T) (For 105UC9T)
Insert and tighten the eye-bolts, or TV
1
ENGLISH
ENG
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
Mount the wall brackets with the bolts to
2
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
Connect the eye-bolts and wall brackets
3
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.
Mounting On a Wall
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LG’s wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
CAUTION
Make sure that children do not climb on
or hang on the TV.
NOTE
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
Brackets, bolts and ropes, are optional.
You can obtain additional accessories
from your local dealer.
ASSEMBLING AND PREPARING
A
A
23
Model 49/55UB850T
55UC970T
60UB850T
65UB930T
65UB950T
65UC970T
65UB980T
VESA (A x B)
B
400 x 400 400 x 400
Standard screw M6 M6
Number of screws
Wall mount bracket
(optional)
4 4
LSW440B
MSW240
LSW440B
Model 79/84UB980T
79UG880T
VESA (A x B)
B
Standard screw
Number of screws
Wall mount bracket
(optional)
600 x 400
M8
4
LSW640B
Wall mount bracket (optional)
LSW440B
LSW640B
MSW240
CAUTION
Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.
NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual
supplied with the wall mount.
When attaching a third-party wall mounting
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG wall
mounting bracket.
(For 55/65UC970T, 79UG880T)
Wall Mount Inner Spacers
ENGENGLISH
24
ASSEMBLING AND PREPARING
Using Sliding Speaker
(For 98UB980T)
Sliding Speaker
1 When TV is turned on the hidden speaker
slides out from inside the TV.
2 Go to (Home) → (Settings) → SOUND
→ Sound Out → Sliding speaker to set slid-
ENGLISH
ENG
ing speaker.
• Please do not use excessive force during
operation of internal sliding Speaker as it may
cause it to malfunction.
• Make sure speaker is in open position when
viewing TV as sound will be abnormal or
distorted.
3 When transporting the TV, make sure that
the Sliding Speaker is closed. If the Sliding
Speaker is open when being transported, it
may become damaged, resulting in malfunction.
• To close the sliding speaker, go to SOUND
→ Sound Out → Sliding speaker and select
Opens when TV is turned on and press the
(POWER) button.
CAUTION
When the sliding speaker is operating
(when the TV is turned on/off), ensure
that children do not put their hands near
the operating part of the speaker (at the
bottom of the TV) and that they do not
crawl into the space below the TV.
- Their hands may be caught and be
injured by the operation of the speaker.
Do not store items under the TV.
- It will interfere with the operation of the
speaker.
ASSEMBLING AND PREPARING
A
ttaching the AV Port Cover
1
Insert the cover holder attached to the AV
port cover into the hole of the main body of
the product as illustrated.
- For 98UB980T: Attach the AV port cover
onto the AV port part. The cover remains
attached by magnet.
- For 105UC9T: Attach the AV port cover by
inserting it into the left hole of the port.
The cover remains attached by magnet.
(For 98UB980T)
Cover Holder
AV Port Cover
(For 105UC9T)
2
AV Port Cover
25
1
1
2
ENGENGLISH
2
CAUTION
If you do not attach the cover holder, the
cover may fall off and cause injury.
26
ASSEMBLING AND PREPARING
Tidying Cables
(For 49/55/60UB850T, 65UB930T, 65UB950T)
Gather and bind the cables with the cable
holder and cable management.
Cable Holder
Cable Management
(For 65/79/84UB980T)
Gather and bind the cables with the cable
ENGLISH
holder.
ENG
(For 79UG880T)
Gather and bind the cables with the cable
holder.
Cable Holder
(For 98UB980T)
Gather and bind the cables with the cable
holder and cable management.
Cable Holder
(For 55/65UC970T)
Gather and bind the cables with the cable
holder and cable management.
Cable holder
Cable Management
Management
Cable Holder
Cable
Cable Management
ASSEMBLING AND PREPARING
27
(For 105UC9T)
Gather and bind the cables with the cable
management.
Cable management
CAUTION
Do not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
Using Built-in Camera
(For 65/79/84/98UB980T, 105UC9T)
You can make a Skype video call or use the
motion recognition function using the built-in
camera of the TV.
This TV does not support the use of an external
camera.
NOTE
Before using the built-in camera, you must
recognize the fact that you are legally
responsible for the use or misuse of the
camera by the relevant national laws
including the criminal law.
The relevant laws include the Personal
Information Protection law which regulates
the processing and transferring of personal
information and the law which regulates the
monitoring by camera in a workplace and
other places.
When using the built-in camera, the user
must gain consent from the persons being
observed. Please avoid using the camera in
the following manner. We suggest avoiding
the following situations:
(1) Using the camera in areas where the
use of camera is generally prohibited such
as restroom, locker room, fitting room, and
security area.
(2) Using the camera while causing the
infringement of privacy.
(3) Using the camera while causing the
violation of the relevant regulations or laws.
ENGENGLISH
28
ASSEMBLING AND PREPARING
Preparing Built-in Camera
1 Pull up the built-in camera at the back of
the TV.
Angle Adjustment Lever
ENGLISH
ENG
NOTE
• Remove the protective film before using the
built-in camera.
2 You can adjust the angle of the camera with
the angle adjustment lever on the back of the
built-in camera.
[Side View]
(For 65/79/84UB980T)
3 Pull down the built-in camera when you are
not using it.
Slide
Names of Parts for the Built-In Camera
Protective film
Camera Lens
7˚
5˚
Lever Lens
(For 98UB980T, 105UC9T)
3˚
5˚
Lever Lens
5˚
7˚
Microphone
5˚
3˚
Checking the Camera’s Shooting Range
1 Press the (Home) button to access the
Home menu.
2 Select CAMERA and then
press the Wheel (OK) button.
NOTE
• The optimal distance from the camera to use
the motion recognition function is between
1.5 m and 4.5 m.
MAKING CONNECTIONS
MAKING CONNECTIONS
Image shown may differ from your TV.
You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device’s connection, refer to the manual provided with
each device.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.
Connect external devices to the TV regardless of the order of the TV port.
If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Refer to the external equipment’s manual for operating instructions.
Connecting to an Antenna or Cable
29
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items. An RF cable is optional.
VHF Antenna
UHF Antenna
Antenna
Coaxial (75Ω)
(*Not Provided)
Terminal
CAUTION
Make sure not to bend the copper wire
of the RF cable.
Copper wire
Complete all connections between
devices, then connect the power cord to
the power outlet to prevent damage to
your TV.
or
Coaxial (75Ω)
(*Not Provided)
Wall Jack
NOTE
To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
Use a signal splitter to use more than 2 TVs.
If the antenna is not installed properly,
contact your dealer for assistance.
DTV Audio Supported Codec: MPEG, Dolby
digital, AAC, HE-AAC.
This TV cannot receive ULTRA HD (3840 x
2160 pixels) broadcasts directly because the
related standards have not been confirmed.
ENGENGLISH
Loading...