LG 65UB950T, 55UB950T Owner’s Manual

OWNER’S MANUAL

LED TV*

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

Click! User Guide

Please read this manual carefully before operating your set and retain it for future reference.

UB85**	UB93**	UC97**
	UB95**	UC9*

UB98**

*MFL68140502*	www.lg.com

P/NO : MFL68140502 (1404-REV03)

Printed in Korea

<![if ! IE]>

<![endif]>ENGLISH

2	TABLE OF CONTENTS

TABLE OF CONTENTS

3 LICENSES

3OPEN SOURCE SOFTWARE NOTICE

3EXTERNAL CONTROL DEVICE SETUP

4SAFETY INSTRUCTIONS

10Viewing 3D Imaging (Only 3D models)

11INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking

15Separate purchase

16Parts and buttons

18- Using the joystick button

19Lifting and moving the TV

20Setting up the TV

20 - Attaching the stand

22Mounting on a table

23Mounting on a wall

25Tidying cables

25Using Built-in Camera

26- Preparing Built-in Camera

26- Name of Parts of Built-in Camera

26- Checking the Camera’s Shooting Range

27 MAKING CONNECTIONS

27Antenna connection

28HDMI connection

29DVI to HDMI connection

29Component connection

30Composite connection

30Audio connection

30- Digital optical audio connection

31Headphone connection

31USB connection

32MHL connection

33REMOTE CONTROL

34MAGIC REMOTE FUNCTIONS

35Registering Magic Remote

35How to use Magic Remote

36Precautions to Take when Using the

Magic Remote

36USING THE USER GUIDE

37MAINTENANCE

37 Cleaning your TV

37 - Screen, frame, cabinet and stand

37 - Power cord

37TROUBLESHOOTING

38ENVIRONMENTAL INFORMATION

38WEEE

39SPECIFICATIONS

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP 3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yy Do not place the TV and/or remote control in the following environments:

-- A location exposed to direct sunlight

-- An area with high humidity such as a bathroom

-- Near any heat source such as stoves and other devices that produce heat -- Near kitchen counters or humidifiers where they can easily be exposed to

steam or oil

-- An area exposed to rain or wind

-- Near containers of water such as vases Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yy Do not place the product where it might be exposed to dust.

This may cause a fire hazard.

yy Mains Plug is the TV connecting/ disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

yy Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yy Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which

are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

yy Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yy Ensure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yy Do not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

yy Bend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

SAFETY INSTRUCTIONS

5

yy When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

yy Do not plug too many electrical devices into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

yy Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

yy Keep the anti-moisture packing material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Desiccant

yy Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

yy Dispose of used batteries carefully to ensure that a small child does not consume them. Please seek DoctorMedical Attention immediately if child consumes batteries.

yy Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)

yy Do not put or store inflammable substances near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yy Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the

power cord and contact the service centre.

yy Do not spray water on the product or scrub with an inflammable substance

(thinner or benzene). Fire or electric shock accident can occur.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6 SAFETY INSTRUCTIONS

yy Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

yy Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted.

yy Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yy Do not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

yy If any of the following occur, unplug the product immediately and contact your local service centre.

-- The product has been impacted by shock

-- The product has been damaged

-- Foreign objects have entered the product -- The product produced smoke or a strange

smell

This may result in fire or electric shock.

yy Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.

yy Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

yy Do not install this product on a wall if it could be exposed to oil or oil mist.

This may damage the product and cause it to fall.

CAUTION

yy Install the product where no radio wave occurs.

yy There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

This may cause an electric shock.

yy Do not install the product on places such as unstable shelves or inclined surfaces.

Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

SAFETY INSTRUCTIONS

7

yy If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

yy If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yy Only use the attachments / accessories specified by the manufacturer.

yy When installing the antenna, consult with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.

yy We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.

yy Only use the specified type of battery.

This could cause damage to the remote control.

yy Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

yy Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight, open fireplace and electric heaters.

yy Do not place non-rechargeable batteries in charging device.

yy Make sure there are no objects between the remote control and its sensor.

yy Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.

yy When connecting external devices such as video game consoles, make sure the connecting cables are long enough.

Otherwise, the product may fall over, which may cause injury or damage the product.

yy Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)

It may cause mechanical failure or could give an electric shock.

yy Please follow the installation instructions below to prevent the product from overheating.

-- The distance between the product and the wall should be more than 10 cm.

-- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

-- Do not install the product on a carpet or cushion.

-- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8 SAFETY INSTRUCTIONS

yy Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

yy Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yy Prevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

yy Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yy Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

yy Avoid touching the screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary or permanent distortion/damage to screen.

yy When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water

or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel.

Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yy As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

yy When unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

yy When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.

The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

yy When moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

SAFETY INSTRUCTIONS

9

yy Contact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

yy Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yy If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yy The panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product.

This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

yy You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yy Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting

in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

yy Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level noise is generated from a high-

speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

10 SAFETY INSTRUCTIONS

Viewing 3D Imaging (Only 3D models)

WARNING

Viewing Environment

yy Viewing Time

-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yy If your eyesight varies between your right and left eye, revise your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

CAUTION

Viewing Environment

Viewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yy Infants/Children

-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

-- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

-- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yy Teenagers

-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yy Elderly

-- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

Using modified 3D glasses may cause eye strain or image distortion.

Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 11

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using.

yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

*If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take up to one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

yy Some models have a thin film attached on to the screen and this must not be removed.

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Magic remote, Batteries (AA)

(Only UB85**, UB93**,

UB95**, UB98**,

UC97**,UC9*) (See p.34)

HDMI Cable

(Depending on model) (See p.28)

Stand Screws

4EA, M6 X L45

(Only 65UB98**) (See p.21)

Wrench

(Only UB98**) (See p.21)

Remote control, Batteries (AAA)

The remote control will not be included for all sales market. (Depending on model)

(See p.33)

Power Cord

(Depending on model)

Stand Screws

4EA, M6 x L50

(Only 79/84UB98**) (See p.21)

Stand Base

(Only UB98**) (See p.21)

Owner’s manual

Cable holder

(Depending on model)

(See p.25)

Insulation Holders

4EA

(Only 84UB98**) (See p.21)

Stand Screws

8EA, M4 X L20

(Only UB85**, UB93**, UB95**)

(See p.20)

ASSEMBLING AND PREPARING 13

<![if ! IE]>

<![endif]>ENGLISH

Stand Body / Stand Base		Component gender cable		Composite gender cable
(Only UB85**, UB93**,		(See p.29)		(See p.29, 30)
UB95**)
(See p.20)

Cable Managements		Cinema 3D Glasses		Ferrite core
2EA		The number of 3D glasses		(Depending on model)
(Only UB85**, UB93**,		may differ depending on the		(See p.14)
UB95**)		model or country.
(See p.25)		(Only UB85**, UB95**,
		UB98**, UC97**,UC9*)

Tag On

Tag on

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

B B

*A < 10 mm

=

*B < 18 mm

=

A A

How to use the ferrite core (Depending on model)

yy Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.

[Cross Section of Ferrite Core]

[to the TV] [to an External device]

ASSEMBLING AND PREPARING 15

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items.

These devices only work with certain models.

AG-F***DP		AG-F***		AN-MR500
Dual Play Glasses		Cinema 3D Glasses		Magic Remote
AN-VC5**		LG Audio Device		Tag on
Video Call Camera

<![if ! IE]>

<![endif]>ENGLISH

	Compatibility		UB85**	UB98**
		UB93**	UB95**
				UC9*
			UC97**
	AG-F***DP		•	•
	Dual Play Glasses
	AG-F***		•	•
	Cinema 3D Glasses
	AN-MR500	•	•	•
	Magic Remote
	AN-VC5**	•	•
	Video Call Camera
	LG Audio Device	•	•	•
	Tag on	•	•	•

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

<![if ! IE]>

<![endif]>ENGLISH

16 ASSEMBLING AND PREPARING

Parts and buttons

A Type : UB85**			C Type : 65UB98**
		Screen			Built-in Camera
			Screen

Speakers	Speakers

Remote control and	Joystick Button2	Remote control and
Intelligent1 sensors		Intelligent1 sensors	Joystick Button2
Power Indicator		LG Logo light

B Type : UB93**, UB95**

D Type : 79UB98**

Screen

Built-in Camera

Screen

Speakers

		Speakers
Remote control and
Intelligent1 sensors	Joystick Button3	Remote control and
LG Logo light		Intelligent1 sensors	Joystick Button2
		LG Logo light

E Type : 84UB98**

Built-in Camera

Screen

Speakers

Remote control and

Intelligent1 sensors Joystick Button3 LG Logo light

F Type : UC9*

Built-in Camera

Screen

Speakers

Joystick Button3

ASSEMBLING AND PREPARING 17

<![if ! IE]>

<![endif]>ENGLISH

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2Joystick Button - This button is located behind the TV screen.

3Joystick Button - This button is located below the TV screen.