LG 65SM5B User Manual [ru]

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating the your set and retain it

for future reference.

32SM5B 43SM5B 49SM5B 55SM5B 65SM5B

www.lg.com

ENGLISH

TABLE OF CONTENTS

3 IMPORTANT PRECAUTIONS

3 Electrical Power Related Precautions

4 Precautions in installing the Product

4 Precautions in Moving the Product

5 Precautions in Using/Cleaning the

Product

5 On Disposal (Only, Hg lamp used LCD

Monitor)

6 LICENSES

7 ASSEMBLY AND PREPARATION

8 Optional Accessories

10 Parts and Buttons

10 Assembling the Memory Cover

11 Connecting the Stand

12 Connecting the Speakers

14 Connecting the IR Sensor

15 Portrait Layout

16 Attaching and removing the LG Logo

Bracket

17 Installing on a Wall

19 REMOTE CONTROL

21 MAKING CONNECTIONS

21 Connecting to a PC

21 External Device Connection

22 Using the Input List

23 TROUBLESHOOTING

26 PRODUCT SPECIFICATIONS

WARNING: This product contains chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands after handling.

Important Precautions

Please read these safety precautions carefully before using the product.

WARNING

Failure to follow those warnings may result in death, serious injury or damage to the product or other property.

WARNING

• Indoor Use Only.

Electrical Power Related Precautions

WARNING

• Use only the power cord supplied with the unit or another

manufacturer's authorized cord.

► Failure to do so may result in fire or electrical shock or damage to

the product.

• Use only a properly grounded plug and receptacle.

► If you do not you may be electrocuted or injured. Or the product

might be damaged.

• Do not use a damaged or loose plug.

► This may cause electrical shock or fire.

• Operate the display only from a power source(i.e. voltage)

indicated in the product specification.

► Otherwise the product can be damaged, fire can occur or you may be

electrocuted. If you are not sure what type of power supply you have, consult a certified electrician.

• In the presence of thunder and lightning, never touch the power

cord and signal cable because it can be very dangerous.

► It can cause electric shock.

• Do not connect several extension cords, electrical appliances

or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.

► A fire can break out due to overheating

• Do not touch the power plug with wet hands. Additionally, if

the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord.

► You may be electrocuted due to excess moisture.

• If you don’t intend to use the product for a long time, unplug the

power cable from the product.

► Covering dust can cause a fire, or insulation deterioration can cause

electric leakage, electric shock or fire.

• Insert the power plug firm so it cannot come loose.

► A loose connection can cause fire.

• Hold the plug when pulling out the power cable. Do not pull the

plug out by the wire. Do not bend the power cord with excessive force or put heavy objects on the power cord.

► The power line can be damaged, which may cause electric shock

or fire.

• Do not insert metal or other conductive materials into the product

openings. Additionally, do not touch the power cable right after plugging into the wall input terminal.

► You may be electrocuted.

• The appliance coupler is used as the disconnect device.

• Please make sure the device is installed near the wall outlet to

which it is connected and that the outlet is easily accessible.

• Do not unplug the power cord while the product is in use.

► Electrical shock can damage the product

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if the unit is turned off.

ENGLISH

Precautions in installing the Product

WARNING

• Keep away from heat sources like eaters or open flames.

► Electrical shock, fire, malfunction or deformation may occur.

• Keep the packing anti-moisture material or vinyl packing out of

the reach of children.

► Anti-moisture material is harmful if swallowed. If swallowed by

mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• Do not put heavy objects on the product on sit upon it.

► If the product collapses or is dropped, you may be injured. Children

must pay particular attention.

• Do not leave the power or signal cable where someone can trip

over it.

► The passerby can falter, which can cause electrical shock, fire, product

breakdown or injury.

• Install the product in a neat and dry place. Do not use near water.

► Dust or moisture can cause electrical shock, fire or product damage.

• Do not add accessories that have not been designed for this

display.

• If you smell smoke or other odors or hear a strange sound from the

product unplug the power cord and contact LG Customer Service.

► If you continue to use without taking proper measures, electrical

shock or fire can occur.

• If you dropped the product or the case is broken, turn off the

product and unplug the power cord.

► If you continue to use without taking proper measures, electrical

shock or fire can occur. Contact LG Customer Service.

• Do not drop an object on or apply impact to the product. Do not

throw any toys or objects at the product.

► It can cause injury to humans, problems to the product and damage

the display.

• Keep out of reach of children and do not place toys near the

product.

• Make sure the product ventilation hole is not blocked. Install the

product more than 10cm from the wall.

► If you install the product too close to the wall, it may be deformed or

fire can break out due to internal heat build-up.

• Do not cover the product with cloth or other material (eg. plastic)

while plugged in.

► The product can be deformed or fire can break out due to internal

overheating.

• Place the product on a flat and stable surface that is large enough

to support the product.

► If the product is dropped, you may be injured or the product may

be broken.

• Install the product where no Electromagnetic Interference occurs.

• Keep the product away from direct sunlight.

► The product can be damaged.

• Do not place the product on the floor.

► Small Children and others may trip over it.

• Do not install this product on a wall if it could be exposed to oil

or oil mist.

► This may damage the product and cause it to fall.

• For displays with glossy bezels the user should consider the

placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.

Precautions in Moving the Product

WARNING

• Make sure to turn off the product.

► You may be electrocuted or the product can be damaged.

• Make sure to remove all cables before moving the product.

► You may be electrocuted or the product can be damaged.

• When lifting or moving the product, do not hold it upside down

while holding only the stand.

► This may cause the product to fall resulting in damage or injury.

• Do not shock the product when moving it.

► You may be electrocuted or the product can be damaged.

• Make sure the panel faces forward and hold it with both hands

to move.

► If you drop the product, the damaged product can cause electric

shock or fire.

• Do not place the product face down.

► This may damage the TFT-LCD screen.

Precautions in Using/Cleaning the Product

WARNING

• Do not attempt to disassemble, repair or modify the product

yourself.

► Fire or electric shock can occur. ► Contact LG Customer Service for repair.

• When cleaning the product, unplug the power cord and scrub

gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

• Keep the product away from water.

► Fire or electric shock accident can occur.

• Avoid high temperatures and humidity.

• Do not put or store flammable substances near the product.

► There is a danger of explosion or fire.

• Keep the product clean at all times.

• Take a comfortable and natural position when working with the

product.

• Take a regular break when working with the product for a long

time.

• Do not press on the panel with a hand or sharp object such as nail,

pencil or pen, or make a scratch on it.

• Keep proper distance from the product and rest from time-to-time.

► Your vision may be impaired if you look at the product too closely

or for too long.

• Set the appropriate resolution by referring to the User’s Guide.

• Keep small accessories out of the reach of children.

• Displaying a still image for long time on the monitor may leave

persistent image or stain on the monitor screen. To avoid this problem, use a screen saver and power off when this product is not used. Persistent image or stain caused by long time usage are not covered by the warranty on this product.

• Do not use products using high voltage around the Monitor. (ex.

Electrical Swatter)

► Monitor may have malfunction as its electrical shock.

• Spray water onto a soft cloth 2 to 4 times, and use it to clean the

front frame;wipe in one direction only. Too much moisture may cause staining.

On Disposal (Only, Hg lamp used LCD Monitor)

• The fluorescent lamp used in this product contains a small amount

of mercury.

• Do not dispose of this product with general household waste.

• Disposal of this product must be carried out in accordance to the

regulations of your local authority.

ENGLISH

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified®and associated logos are trademarks of DivX, LLC and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

NOTE

• The warranty will not cover any damage caused by using the product in an excessively dusty environment.

ASSEMBLY AND PREPARATION

CAUTION

• Always use genuine components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of counterfeit components.

NOTE

• The accessories provided with your product may vary depending on the model or region.

• Product specifications or contents in this manual may be changed without prior notice due to upgrade of

product functions.

• SuperSign Software & Manual

- Downloading from the LG Electronics website.

- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your model.

ENGLISH

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.

Stand

ST-322T 32SM5B

ST-432T 43SM5B

ST-492T 49SM5B/55SM5B

ST-652T 65SM5B

Speakers

SP-5000

32SM5B -

43SM5B

49SM5B

55SM5B

65SM5B

Stand kit

Cable holder/

Cable Tie

Stand

Spacers

2 EA

Diameter 4.0 mm x Pitch

0.7 mm x Length 8 mm (including spring washer)

Screws

Diameter 4.0 mm x Pitch 0.7 mm

Length

Model

32SM5B 10 mm 6 EA

43SM5B 14 mm 8 EA

49SM5B 14 mm 8 EA

55SM5B 14 mm 8 EA

65SM5B 16 mm 8 EA

Screws

(including

spring washer)

Screws

Diameter 4.0 mm x Pitch

1.6 mm x Length 10 mm

Quantity

Speaker kit

ENGLISH

KT-OPSA

Media Player

MP500/ MP700

( It may not be supported depending on the model.)

Media Player kit

Screws

Connecting

Cable

OPS kit

CD (Owner's Manual)/

Cards

Card

(Easy Setup Guide)

Power Cord

KT-SP0

Pixel sensor kit

NOTE

• Cable holder/cable tie may not be available in some areas or for some models.

• Optional accessories are available for some models. If necessary, please purchase them separately.

• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.

• Before you attach the OPS kit or Media Player, connect the cable to the port.

ENGLISH

Parts and Buttons

- The image may be different according to the model.

Buttons

Assembling the Memory Cover

Assemble the cover with a screw as illustrated to prevent the USB memory from theft.

Changes the input source.

y y y

Accesses the main menus, or saves your

input and exits the menus. Adjust the up and down.

Moves left and right.

y/I:

Displays the current signal and mode.

Turns the power on or off.

Connecting the Stand

- For certain models only.

- The image may be different according to the model.

32SM5B

43SM5B 49SM5B 55SM5B

65SM5B

ENGLISH

Connecting the Speakers

- For certain models only.

- The image may be different according to the model.

32SM5B

1 Connect an input signal cable before installing

the speakers.

2 Mount the speakers by using screws as

shown below. Make sure the power cable is

disconnected before making a connection.

Basic installation

3 Then connect the speaker cable. After installing

your speakers, use holders and cable ties to

organize the speaker cables.

Basic installation

Installation with OPS connected

43SM5B 49SM5B 55SM5B

65SM5B

1 Connect an input signal cable before installing

the speakers.

2 Mount the speakers by using screws as

shown below. Make sure the power cable is

disconnected before making a connection.

NOTE

• Please turn off the power before removing the

cable. Connecting or removing the speaker cable while turned on may result in no sound.

ENGLISH

3 Then connect the speaker cable. After installing

your speakers, use holders and cable ties to

organize the speaker cables.

ENGLISH

Connecting the IR Sensor

When you connect the cable to the product, the feature for receiving remote control signals is activated. Rotate the IR sensor according to the screen orientation (Landscape/Portrait).

- The image may be different according to the model.

Basic installation

Landscape scene

Portrait scene

<Front>

<Rear>

Portrait Layout

When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).

Using Kensington Lock

(This is not available for all models.)

The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit

com

Connect the Kensington security system cable between the monitor and a table.

http://www.kensington.

ENGLISH

NOTE

• The Kensington security system is optional. You

can obtain additional accessories from most electronics retail stores.

ENGLISH

Attaching and removing the LG Logo Bracket

- For certain models only.

- The image may be different according to the model.

Removing the LG Logo Attaching the LG Logo on the right side

1 Lay a clean cloth on the floor, and then put the

monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.

LG Logo Bracket

After removing the screw, remove the LG Logo. When re-attaching the LG Logo, repeat the process in reverse order.

1 Lay a clean cloth on the floor, and then put the

monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.

After removing the screw, remove the LG Logo. Attach the LG Logo Bracket with a screw, aligning it with the hole on the right side.

Installing on a Wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.

Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.

1 Use only screws and wall mounting brackets

that conform to VESA standards.

2 Screws which are longer than standard length

may damage the inside of the monitor.

3 A non-VESA standard screw may damage

the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws.

4 Please use VESA standard as below.

• 785 mm and above

* Fixing screws: Diameter 6.0 mm x Pitch

1.0 mm x Length 12 mm

785 mm

ENGLISH

CAUTION

• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.

• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall

mount and contact your local dealer or qualified personnel to assist with the installation.

• Do not over tighten the screws as this may damage the monitor and void your warranty.

• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by

misuse or use of improper accessories are not covered by the warranty.

NOTE

• The wall mount kit includes the installation guide and all necessary parts.

• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.

• The length of screws required may differ depending on the wall mount. Be sure to use the correct length.

• For more information, please refer to the guide provided with the wall mount.

ENGLISH

Securing the monitor to a wall (optional)

(Procedure may differ depending on the model.)

1 Insert and tighten the eyebolts, or brackets and

bolts on the back of the monitor.

- If there are already bolts inserted in the

eyebolts’ position, remove the other bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the eyebolts on the rear of the monitor.

3 Connect the eyebolts and wall brackets tightly

with a sturdy cord. Make sure the securing cord is horizontal with the flat surface.

WARNING

• If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,

particularly to children, can be avoided by taking simple precautions such as:

» Using cabinets or stands recommended by the manufacturer. » Only using furniture that can safely support the monitor. » Ensuring the monitor is not overhanging the edge of the supporting furniture. » Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both

the furniture and the monitor to a suitable support.

» Not placing cloth or other materials between the monitor and supporting furniture. » Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

CAUTION

• Make sure that children do not climb on or hang from the monitor.

NOTE

• Use a platform or cabinet that is large and strong enough to support the monitor securely.

• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail

store.

• The illustration shows a general example of installation and may look different from the actual product.

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.

To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.

CAUTION

• Do not mix old and new batteries, as this may

damage the remote control.

• Be sure to point the remote control toward the

remote control sensor on the monitor.

(POWER) Turns the monitor on or off.

MONITOR ON Turns the monitor on. MONITOR OFF Turns the monitor off. ENERGY SAVING( ) Reduces power consumption by adjusting peak

screen brightness.

INPUT Selects the input mode. 3D Used for viewing 3D videos. (This model does not support this.)

ENGLISH

1/a/A Toggles between numerical and alpha betical.

(Depending upon the model, this feature may not be supported.)

Number and Alphabet buttons

Enters numerical or alphabetical characters depending upon the setting. (Depending upon the model, this feature may not be supported.)

CLEAR Deletes the entered numerical or alphabetical character.

(Depending upon the model, this feature may not be supported.)

Volume Up/Down Button Adjusts the volume. ARC Selects the Aspect Ratio mode. AUTO Automatically adjusts picture position and minimizes image

instability (available for RGB input only).(Depending upon the model, this feature may not be supported.)

MUTE Mutes all sounds. BRIGHTNESS Adjusts the brightness of the display. PAGE Function is not

supported in the this model. (Depending upon the model, this feature may not be supported.)

ENGLISH

PSM Selects the Picture Mode. HOME Activates the Launcher. W.BAL Enters the White Balance menu.

SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key (Depending upon the model, this feature

may not be supported.)

Navigation Buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Allows you to move back one step in the user interaction function. EXIT Quit all OSD tasks and applications.

Allows you to control various multimedia devices to enjoy

multimedia simply by using the remote control through the SimpLink menu. (Depending upon the model, this feature

may not be supported.)

TILE Selects the TILE Mode. PICTURE ID ON/OFF When the Picture ID number matches the Set ID

number, you can control whichever monitor you want in multi-display format.

USB Menu Control Buttons Controls media playback.

MAKING CONNECTIONS

You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device.

Connecting to a PC

Some of the cables are not provided.

This monitor supports the Plug & Play* feature.

* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.

External Device Connection

Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.

Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.

NOTE

• For the best image quality, using the monitor with HDMI connection is recommended.

• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,

such as a DVI-D cable.

• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.

• Sometimes red, green, or blue spots may appear on the screen. This is normal.

• Use a High Speed HDMI®/TM cable.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may

not display or a connection error may occur.

• Recommended HDMI Cable Types

- High-Speed HDMI®/TM Cable

- High-Speed HDMI®/TM Cable with Ethernet

• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to

manually change the default audio output to HDMI.

• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.

• You may experience compatibility issues if you use HDMI-PC mode.

• Make sure the power cable is disconnected.

• If you connect a gaming device to the monitor, use the cable provided with the gaming device.

• It is recommended to use the speakers that are provided as optional accessories.

• High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.

ENGLISH

CAUTION

• Connect the signal input cable and tighten it by turning the screws clockwise.

• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on

the screen.

• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a

screensaver if possible.

• A wireless communication device near your monitor can affect the image.

+ 49 hidden pages