LG 65NANO97VNA Owner’s Manual

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

*MFL71500613*

(2003-REV00)

www.lg.com

ENGLISH_index

- Install your TV where there is proper ventilation. Do not install in

• Ventilation

a confined space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other materials

while unit is plugged in.

the TV for a long period, the ventilation openings may become hot.

being twisted, kinked, pinched, closed in a door, or walked upon.

• Protect the power cord from physical or mechanical abuse, such as

DO NOT OPEN

RISK OF ELECTRIC SHOCK

Pay particular attention to plugs, wall outlets, and the point where

• Take care not to touch the ventilation openings. When watching

CAUTION

the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

emergency, the power plug must remain readily accessible.

pull on the power cord to unplug the TV.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord. Do not

• Do not connect too many devices to the same AC power outlet as

- The power plug is the disconnecting device. In case of an

this could result in fire or electric shock.

• Disconnecting the Device from the Main Power

• Do not let your children climb or cling onto the TV. Otherwise, the

TV may fall over, which may cause serious injury.

An outdoor antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can come in contact with such power lines or circuits

- If an outdoor antenna is installed, follow the precautions below.

• Outdoor Antenna Grounding (Can differ by country):

as death or serious injury can occur.

Warning! Safety

instructions

uninsulated “dangerous voltage” within the product’s

This symbol is intended to alert the user to the presence of

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

enclosure that may be of sufficient magnitude to constitute a risk

of electric shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS

• Do not place the TV and/or remote control in the following

- Keep the product away from direct sunlight.

environments:

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that

produce heat.

- Near kitchen counters or humidifiers where they can easily be

exposed to steam or oil.

filled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g., on shelves above the unit).

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place objects

- Near flammable objects such as gasoline or candles, or expose

the TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/

explosion, malfunction or product deformation.

ENGLISH_index

• Grounding (Except for devices which are not grounded.)

- TV with a three-prong grounded AC plug must be connected to

a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock.

• Never touch this apparatus or antenna during a lightning storm.

You may be electrocuted.

• Make sure the power cord is connected securely to the TV and wall

socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

• Do not insert metallic or inflammable objects into the product. If a

foreign object is dropped into the product, unplug the power cord and contact the customer service.

• Do not touch the end of the power cord while it is plugged in. You

may be electrocuted.

• If any of the following occur, unplug the product

immediately and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC

adapter, power cord, or TV).

- If you smell smoke or other odors coming from the TV

- When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.

• Do not use high voltage electrical equipment near the TV (e.g., a

bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without written

authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.

• Use only an authorized attachments / accessories approved by

LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may result in

fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An

impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not touch the TV

with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of the

reach of children.

- Do not short circuit, disassemble, or allow the batteries to

overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

- Caution : Risk of fire or explosion if the battery is replaced by an

incorrect type.

• Moving

- When moving, make sure the product is turned off, unplugged,

and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

• Keep the packing anti-moisture material or vinyl packing out of the

reach of children.

• Do not allow an impact shock, any objects to fall into the product,

and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp

object such as a nail, pencil, or pen, or make a scratch on it. It may causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently with a

soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

ENGLISH_index

Preparing

• If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the

access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord.

Magic Remote Control

MR20GA

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

Wall Mounting Bracket

(Depending on model) Make sure to use screws and wall mount bracket that meet the VESA

standard. Standard dimensions for the wall mount kits are described in the following table.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 8mm thick, 18mm width and 8mm a wire diameter. Use an extension cable that supports if the USB cable or USB memory stick does not fit into your TV’s USB port. (Depending on model)

* A < 8mm

* B < 18mm

* C < 8mm

Model 65/75NANO99*

Screws distance (A) (mm) 180

Standard screw M6

Number of screws 2

Wall mount bracket

WB20GB

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur.

• Recommended HDMI Cable Types

- Ultra High Speed HDMI®/™ cable (3 m or less)

Separate Purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

65NANO95*

Model

65NANO97* 65NANO98* 65/75NANO99*

VESA (A x B) (mm) 400x400 600x400 Standard screw M6 M8 Number of screws 4 4

75NANO95* 75NANO97* 75NANO98*

Wall mount bracket LSW440B LSW640B

ENGLISH_index

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material

that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all

cables.

• When holding the TV, the screen should face away from you to

avoid damage.

• Avoid touching the screen at all times, as this may result in

damage to the screen.

• When attaching the stand to the TV set, place the screen

facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper ventilation.

• Hold the top and bottom of the TV frame firmly. Make sure not to

hold the transparent part, speaker, or speaker grill area.

• When transporting a large TV, there should be at least 2 people.

• When transporting the TV by hand, hold the TV as shown in the

following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive

vibration.

• When transporting the TV, keep the TV upright, never turn the TV

on its side or tilt towards the left or right.

• Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage screen.

• When handling the TV, be careful not to damage the protruding

buttons.

10cm

(Depending on model)

2 Connect the power cord to a wall outlet.

10cm

ENGLISH_index

• Do not apply foreign substances (oils, lubricants, etc.) to

the screw parts when assembling the product. (Doing so may damage the product.)

• If you install the TV on a stand, you need to take actions

to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

• Do not use any unapproved items to ensure the safety and

product life span.

• Any damage or injuries caused by using unapproved items

are not covered by the manufacturer’s warranty.

• Make sure that the screws are inserted correctly and

fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

• If a television is not positioned in a sufficiently stable

location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

- Using cabinets or stands recommended by the

manufacturer of the television.

- Only using furniture that can safely support the

television.

- Ensuring the television is not overhanging the edge of

the supporting furniture.

- Not placing the television on tall furniture (for

example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

- Not standing the televisions on cloth or other

materials placed between the television and supporting furniture.

- Educating children about the dangers of climbing on

furniture to reach the television or its controls.

Securing TV to the Wall

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the

back of the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the

location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

• Use a platform or cabinet that is strong and large enough to

support the TV securely.

• Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

ENGLISH_index

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the T V carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

10 cm

(Depending on model)

• Remove the stand before installing the TV on a wall mount

by performing the stand attachment in reverse.

• For more information of screws and wall mount bracket,

refer to the Separate Purchase.

• If you intend to mount the product to a wall, attach VESA

standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting a TV on the wall, make sure not to install

the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed

to oil or oil mist. This may damage the product and cause it to fall.

(Depending on model)

• Do not use a sharp object when you detached the cable

cover. This could damage the cable or the cabinet. It may also cause personal harm. (Depending on model)

• When installing the wall mounting bracket, it is recommended to

cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model)

Stand hole

ENGLISH_index

Connections

Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.

• Certain 8K input/decoding standards may not be supported.

An additional device may be necessary to support certain 8K standards. Upscaled and enhanced 8K images will vary depending on the source content.

• → → [Picture] → [Additional Settings] → [HDMI Ultra

HD Deep Colour]

- 8K: Support 8K @ 50/60Hz (4:2:0), 8K @ 24/25/30Hz (4:4:4,

4:2:2, 4:2:0)

- 4K: Support 4K @ 50/60Hz (4:4:4, 4:2:2, 4:2:0), 4K @ 100/120Hz

(4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 50/60Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Colour] setting to off.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

• Use a signal splitter to use more than 2 TVs.

• If the image quality is poor, install a signal amplifier properly to

improve the image quality.

• If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

• An antenna cable and converter are not supplied.

• For a location that is not supported with Ultra HD broadcasting, this

TV cannot receive Ultra HD broadcasts directly.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model)

USB

Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

IR Blaster

• Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD

player, soundbar, game consoles, etc., using the IR Blaster. (Depending on country)

- Connect the IR Blaster cable to the TV’s IR Blaster port.

- Place both ends (one or two) of the IR Blaster in front of the

external device as shown in the picture below.

- Use universal control settings to control the device. Go to

→ → [Connection] → [Device Connection Settings] → [Universal Control Settings].

- Secure the IR Blaster with the 3M tape provided.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.

HDMI

• When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

• Supported HDMI Audio format (Depending on model):

True HD (48kHz), Dolby Digital / Dolby Digital Plus (32kHz / 44.1kHz / 48kHz), PCM (32kHz / 44.1kHz / 48kHz / 96kHz / 192kHz)

ENGLISH_index

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

• The external device connection may differ from the model.

• Connect external devices to the TV regardless of the order of the

TV port.

• If you record a TV program on a Blu-ray/DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

• Refer to the external equipment’s manual for operating

instructions.

• If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

• In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear.

• In PC mode, some resolution settings may not work properly

depending on the graphics card.

• If Ultra HD content is played on your PC, video or audio may

become disrupted intermittently depending on your PC’s performance. (Depending on model)

• When connecting via a wired LAN, it is recommended to use a CAT

7 cable. (Only when por t is provided.)

Using Button

You can simply operate the T V functions, using the button.

Basic functions

Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3)

1 All running apps will close, and any recording in progress will stop. 2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Turns the power off.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved programmes.

ENGLISH_index

Using Magic Remote Control

(Depending on model) The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly. When the message [Magic Remote battery is low. Please change the

battery.] is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5VAA)

matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV.

1 1

(Some buttons and services may not be provided depending on models or regions.)

To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or off.

(STB POWER) You can turn your set-top box on or off by adding

the settop box to the universal remote control for your TV. Number buttons Enters numbers.

Accesses the [Quick Help].

(DASH) Inserts a between numbers such as 2-1 and 2-2. Accesses the saved programmes list.

(MORE ACTIONS) Displays more remote control functions.

- QUICK ACCESS is a feature that allows you to enter a specified app

or Live TV directly by pressing and holding the number buttons.

(MUTE) Mutes all sounds.

(MUTE) Accesses the [Accessibility] menu.

(Voice recognition) Network connection is required to use the

voice recognition function. Check for recommended content. (Some recommended services may

not be available in some countries.)

(Voice recognition) Speak while pressing and holding the

button to use the voice recognition feature.

(HOME) Accesses the Home menu.

(Q. Settings) Accesses the Quick Settings.

(Q. Settings) Displays the [All Settings] menu.

Wheel (OK) Press the center of button to select a menu. You

can change programmes by using button.

(up/down/left/right) Press the up, down, left or right

button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.

(BACK) Returns to the previous level.

viewing.

Streaming Service buttons Connects to the Video Streaming

Service.

Shows the previous history.

(INPUT) Changes the input source.

- When you are not watching via a set-top box: the display changes

to the set-top box screen.

menus.

, (Control buttons) Controls media contents.

Edits QUICK ACCESS

Audio descriptions function will be enabled.

Adjusts the volume level.

Scrolls through the saved programmes.

(HOME) Shows the previous history.

(BACK) Clears on-screen displays and returns to last input

Shows programme guide.

(INPUT) Accesses the [Home Dashboard].

Displays the set-top box Home menu.

, , , These access special functions in some

Runs the record function.

ENGLISH_index

Registering Magic Remote Control

User Guide

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK)

on the remote control.

* If the TV fails to register the Magic Remote, try again after turning the

TV off and back on.

How to deregister the Magic Remote Control

Press the (BACK) and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

* Press and hold the button for more than 5 seconds to disconnect

and re-register the Magic Remote at the same time.

• Do not mix new batteries with old batteries. This may

cause the batteries to overheat and leak.

• Failure to match the correct polarities of the battery may

cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.

• This apparatus uses batteries. In your community there

might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Batteries inside or inside the product shall not be exposed

to excessive heat such as sunshine, fire or the like.

• In Analogue TV and some countries, some remote control

buttons may not work.

For more information about this TV, read the USER GUIDE embedded in the product. (Depending on model)

• To open the USER GUIDE → → [Support] → [User

Guide]

ENGLISH_index

Troubleshooting

Cannot control the TV with the remote control.

• Check the remote control sensor on the product and try again.

• Check if there is any obstacle between the product and the remote

control.

• Check if the batteries are still working and properly installed (

to , to ).

No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other

products.

The TV turns off suddenly.

• Check the power control settings. The power supply may be

interrupted.

• Check if the auto-off function is activated on the settings related

time.

• If there is no signal while the TV is on, the TV will turn off

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), no signal is detected.

• Turn the TV off/on using the remote control.

• Reconnect the HDMI cable.

• Restart the PC with the TV on.

Abnormal Display

• If the product feels cold to the touch, there may be a small “flicker”

when it is turned on. This is normal, there is nothing wrong with product.

• This panel is an advanced product that contains millions of pixels.

You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

• You may find different brightness and colour of the panel

depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not

malfunction.

• Displaying a still image for a prolonged period of time may cause

image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

Generated Sound

• “Cracking” noise: A cracking noise that occurs when watching or

turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

• Electrical circuit humming/panel buzzing: A low level noise is

generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

• When cleaning the product, be careful not to allow any

liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending on model)

• Make sure to wring any excess water or cleaner from the

cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a

dry cloth to wipe the screen.

ENGLISH_index

Specifications

(Depending on country)

Broadcasting Specifications

Digital TV

(Depending on country)

Television system

Programme coverage

Maximum number of storable

programmes

DVB-T/T2

DVB-T/T2/C/S/S2

VHF, UHF

C-Band2, Ku-Band

DVB-T/T2 & Analogue TV : 3,000

DVB-S/S2 : 6,000

External antenna impedance 75 Ω

CI Module3 (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm

1 Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.) 2 Only DVB-T2/C/S2 support models. 3 Depending on model.

(Only NANO99*)

Wireless module(LGSBWAC94)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz

5,150 to 5,725MHz 5,725 to 5,850MHz

Bluetooth

Frequency range Output power(Max.)

2,400 to 2,483.5MHz 9dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm between the device and the body. * IEEE 802.11ac is not available in all countries.

Analogue TV

(Depending on country)

PAL B/B, PAL B/G, PAL D/K, PAL-I

SECAM B/G, SECAM D/K

NTSC-M

VHF, UHF, CATV

17.5dBm 18dBm 12dBm

ENGLISH_index

(Except for NANO99*)

Wireless module(LGSBWAC92)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm between the device and the body. * IEEE 802.11ac is not available in all countries.

2,400 to 2,483.5MHz

5,150 to 5,725MHz 5,725 to 5,850MHz

Bluetooth

Frequency range Output power(Max.)

2,400 to 2,483.5MHz 8dBm

Environment condition

Operating Temperature 0 °C to 40 °C

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

18dBm 18dBm 12dBm

• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)

- The Energy consumption is measured in accordance with IEC 62087.

• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.

• For information of the power supply and power consumption, refer to the label attached to the product. (Depending on Country)

- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

* On some models, the label is inside the external device connection terminal cover. * Depending on the model or country, the typical power consumption may not be on label.

ENGLISH_index

Open Source Software Notice Information

Regulatory

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource. lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Licenses

WARNING!

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the

television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the

supporting furniture.

• Not placing the television set on tall furniture (for example,

cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

• Not placing the television set on cloth or other materials that may

be located between the television set and supporting furniture.

• Educating children about the dangers of climbing on furniture to

reach the television set or its controls. If your existing television set is being retained and relocated, the same considerations as above should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

(Magic Remote supported models only)

Refers to stand-by.

Refer to “ON” (power).

Refers to dangerous voltage.

ENGLISH_index

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.

Model

Serial No.

For any Suggestion, Opinion,

Complaints, Please Call

800 54 in UAE

0800 545454 in South Africa

080 100 54 54 in Morocco

19960 in Egypt

021 36 54 54 in Algeria

Other countries, Please contact our

local dealer or log into

http://www.lg.com

MANUEL D’UTILISATION

Sécurité et référence

Téléviseur LED*

* Le téléviseurLED de LG combine un écranLCD et un rétroéclairageLED.

Veuillez lire attentivement ce manuel avant de mettre en service votre produit et conservez-le afin de pouvoir vous y référer ultérieurement.

www.lg.com

FRANÇAIS

Avertissement! Consignes de sécurité

AVERTISSEMENT

RISQUE D'ÉLECTROCUTION.

NE PAS OUVRIR.

AVERTISSEMENT : AFIN DE RÉDUIRE LE RISQUE D'ÉLECTROCUTION, NE RETIREZ PAS LE CAPOT (OU L'ARRIÈRE). AUCUNE PIÈCE N'EST RÉPARABLE PAR L'UTILISATEUR LUI-MÊME. CONFIEZ L'ENTRETIEN DE CET APPAREIL À UN PERSONNEL QUALIFIÉ.

Ce symbole est destiné à prévenir l'utilisateur de la présence

d'une «tension dangereuse» non isolée dans le boitier du produit. Cette tension peut être d'amplitude suffisante pour constituer un risque d'électrocution.

Ce symbole est destiné à prévenir l'utilisateur que des

instructions importantes sur le fonctionnement et l’entretien (réparation) de l'appareil se trouvent dans la documentation.

AVERTISSEMENT: AFIN DE RÉDUIRE LE RISQUE D'INCENDIE ET D'ÉLECTROCUTION, N'EXPOSEZ PAS LE PRODUIT À LA PLUIE OU À L'HUMIDITÉ.

• POUR PRÉVENIR TOUT RISQUE D’INCENDIE, VEUILLEZ MAINTENIR

LES BOUGIES OU AUTRES OBJETS IMFLAMMABLES ÉLOIGNÉS DE CE PRODUIT EN TOUT TEMPS.

• N’installez pas la TV et la télécommande dans les

environnements suivants:

- Évitez d’exposer l’appareil à la lumière directe du soleil.

- Une zone fortement humide comme une salle de bain

- À proximité d’une source de chaleur comme une cuisinière et

tout autre appareil produisant de la chaleur.

- À proximité d’un plan de travail de cuisine ou d’un

humidificateur où elles pourraient facilement être exposées à la vapeur ou à l’huile.

- Une zone exposée à la pluie et au vent.

- Ne placez pas d'objets contenant du liquide (tel qu'un vase, une

tasse, etc.) sur ou au-dessus de ce produit (par exemple, sur une étagère au-dessus de l'unité).

- N'installez pas le téléviseur à proximité d'objets inflammables,

comme de l'essence ou des bougies. N'exposez pas directement le téléviseur à l'air conditionné.

- N'installez pas l'appareil dans un endroit excessivement

poussiéreux.

Le non-respect de cette consigne peut provoquer un incendie, un choc électrique, une combustion/explosion, un dysfonctionnement ou une déformation du produit.

• Ventilation

- Installez le téléviseur dans un endroit bien aéré. Évitez les

espaces fermés, tels qu'un meuble de bibliothèque.

- N’installez pas le produit sur un tapis ou un coussin.

- Évitez de bloquer ou de couvrir le produit avec un tissu ou autre

matériau lorsque l'unité est branchée.

• Évitez de toucher les ouvertures de ventilation. Lors de l'utilisation

prolongée du téléviseur, les ouvertures de ventilation peuvent surchauffer.

• Protégez le câble d’alimentation contre les mauvais traitements

physiques ou mécaniques, la torsion, la pliure, le pincement, et évitez qu’il ne puisse être pris dans une porte ou que l’on puisse marcher dessus. Vérifiez soigneusement les fiches, les prises murales et les points de sortie du cordon de l'appareil.

• Ne déplacez pas le téléviseur tant que le cordon d'alimentation

est branché.

• N'utilisez pas de cordon d'alimentation endommagé ou déformé.

• Veillez à tenir le cordon d'alimentation par la fiche pour le

débrancher. Ne tirez pas sur le cordon d'alimentation pour débrancher le téléviseur.

• Ne branchez pas trop d'appareils à la même prise secteur pour

éviter les risques d'incendie ou de choc électrique.

• Déconnexion de l'appareil de l'alimentation principale

- La fiche d'alimentation est l'élément de déconnexion. En

cas d'urgence, la fiche d'alimentation doit rester facilement accessible.

• Ne laissez pas les enfants grimper sur la TV ou s’agripper dessus.

Dans le cas contraire, la TV risque de tomber ce qui peut entraîner des blessures graves.

• Mise à la terre de l'antenne extérieure (peut varier selon le

pays):

- Si une antenne extérieure est installée, respectez les précautions

suivantes. Un système d'antenne extérieure ne doit pas être installé à

proximité de lignes électriques aériennes ou autres lumières ou circuits électriques. Il ne doit pas entrer en contact avec des lignes ou circuits électriques au risque d'entraîner un décès ou des blessures graves.

FRANÇAIS

• Mise à la terre (ne s'applique pas aux appareils ne nécessitant pas

de mise à la terre)

- Un téléviseur muni d'une fiche électrique secteur mise à la terre

avec trois broches doit être branché sur une prise secteur mise à la terre avec trois broches. Veillez à brancher le câble de mise à la terre pour éviter les chocs électriques.

• Ne touchez jamais cet appareil ou cette antenne pendant un orage.

Vous pourriez vous électrocuter.

• Assurez-vous que le cordon d'alimentation est bien branché

au téléviseur et à la prise murale. Si ce n'est pas le cas, la fiche d'alimentation et la prise risquent d'être endommagées. Dans des situations extrêmes, un incendie peut se déclarer.

• N'insérez pas d'objets métalliques ou inflammables dans le produit.

Si un corps étranger tombe dans le produit, débranchez le cordon d'alimentation et contactez le service client.

• Ne touchez pas le bout du cordon d'alimentation lorsqu'il est

branché. Vous risqueriez de subir un choc électrique.

• Si vous êtes confronté à l'une des situations suivantes,

débranchez immédiatement le produit et contactez votre service client local.

- Le produit a été endommagé.

- Si de l'eau ou une autre substance pénètre dans le produit

(adaptateur secteur, cordon d'alimentation ou téléviseur).

- Si vous sentez de la fumée ou toute autre odeur émanant du

téléviseur

- Pendant les orages ou lorsque l'appareil n'est pas utilisé pendant

un long moment.

Même si le téléviseur est éteint via la télécommande ou un bouton, l'alimentation secteur est connectée à l'unité si elle n'est pas débranchée.

• N'utilisez pas d'appareil électrique à haute tension à proximité du

téléviseur (par exemple, un tue-mouches électrique). Cela pourrait endommager le produit.

• N'essayez pas de modifier ce produit sans une autorisation écrite

de LGElectronics. Un incendie accidentel ou un choc électrique peuvent se produire. Contactez votre service client local pour tout service ou réparation. Des modifications non autorisées peuvent annuler le droit de l'utilisateur à utiliser ce produit.

• Utilisez uniquement des pièces/accessoires approuvés par

LGElectronics. Le non-respect de cette consigne peut provoquer un incendie, un choc électrique, un dysfonctionnement ou des dommages au produit.

• Ne démontez pas l’adaptateur secteur ou le câble d’alimentation.

Le non-respect de cette consigne peut provoquer un incendie ou une électrocution.

• Manipulez l'adaptateur avec précaution pour éviter de le faire

tomber ou de l'abîmer. Un impact pourrait endommager l'adaptateur.

• Pour réduire les risques d'incendie ou de choc électrique, ne

touchez pas le téléviseur avec les mains mouillées. Si le cordon d'alimentation est mouillé ou couvert de poussière, séchez intégralement la prise d'alimentation ou essuyez la poussière.

• Batteries

- Rangez les accessoires (batterie, etc.) dans un endroit sûr hors de

portée des enfants.

- Ne court-circuitez pas les batteries, ne les démontez pas et ne

les laissez pas surchauffer. Ne jetez pas les batteries dans un feu. N’exposez pas les piles à une température excessive.

- Avertissement: il existe un risque d'incendie ou d'explosion si

la batterie est remplacée par une autre batterie de type incorrect.

• Déplacement

- Lorsque vous déplacez le produit, assurez-vous qu'il est éteint,

débranché et que tous les câbles ont été retirés. Il faut deux (2) personnes ou plus pour porter un téléviseur de grande taille. Ne vous appuyez pas sur le panneau avant du téléviseur et n'appliquez aucune pression dessus. Vous risqueriez d'endommager le produit ou de vous exposer à un risque d'incendie ou de blessure.

• Ne laissez pas le matériau d'emballage anti-humidité ou

l'emballage en vinyle à la portée des enfants.

• Évitez tout impact ou chute d'objets sur l'appareil, et ne laissez rien

tomber sur l'écran.

• N’appuyez pas fortement sur le panneau avec la main ou un

objet pointu tel qu'un clou, un crayon ou un stylo. Ne rayez pas le panneau. Cela risquerait d'endommager l'écran.

• Nettoyage

- Lorsque vous nettoyez le produit, débranchez le cordon

d'alimentation et essuyez délicatement la surface avec un chiffon doux et sec. Ne pulvérisez pas d'eau ou autre liquide directement sur le téléviseur. N’utilisez jamais de produit pour vitre, de désodorisant, d’insecticide, de lubrifiant, de cire pour voiture ou industrielle, d’abrasif, de diluant, de benzène, d’alcool, etc., car ces produits risqueraient d’endommager le produit et / ou son écran. Le non-respect de cette consigne peut provoquer un choc électrique ou endommager le produit.

FRANÇAIS

Préparation

• Si le téléviseur est mis sous tension pour la première fois depuis

son expédition depuis l’usine, l’initialisation peut prendre quelques minutes.

• L’image présentée peut être différente de votre téléviseur.

• L’affichage à l’écran de votre TV peut différer légèrement de celui

qui est présenté dans ce manuel.

• Les menus et options disponibles peuvent être différents selon la

source d’entrée ou le modèle de produit utilisé.

• De nouvelles fonctionnalités pourront être ajoutées ultérieurement

à ce téléviseur.

• Le téléviseur doit être raccordé à une prise électrique facile d'accès

située à proximité. Le bouton marche/arrêt n'est pas présent sur tous les modèles de produit. Pour éteindre ces appareils, il est nécessaire de débrancher le cordon d'alimentation.

• Les éléments fournis avec votre produit diffèrent en fonction du

modèle choisi.

• Les caractéristiques des produits ou le contenu de ce manuel

peuvent être modifiés sans préavis en cas de mise à jour des fonctions.

• Pour une connexion optimale, les câblesHDMI et les

périphériquesUSB doivent comporter des connecteurs d'une épaisseur inférieure à 8mm, d'une largeur inférieure à 18mm et d'un diamètre de câble inférieur à 8mm. Utilisez une rallonge prenant en charge si le câble USB ou la clé USB ne s’adapte pas au port USB de la TV. (Selon le modèle)

* A < 8mm

* B < 18mm

* C < 8mm

Magic Remote

MR20GA

Vérifiez si votre modèle de téléviseur prend en charge la fonctionBluetooth dans les spécifications du module sans fil afin de vous assurer qu’il est compatible avec la Magic Remote.

Support de fixation murale

(Selon le modèle) Veillez à utiliser des vis et un support mural conformes aux normes

VESA. Les dimensions standard des kits de support mural sont indiquées dans le tableau suivant.

Modèle 65/75NANO99*

Distance des vis (A) (mm) 180

Vis standard M6

Nombre de vis 2

Support mural

WB20GB

• Utilisez un câble certifié sur lequel est apposé le logo HDMI.

• Si vous utilisez un câble non certifié HDMI, l’écran peut ne pas

s’afficher ou une erreur de connexion peut survenir.

• Types de câbles HDMI recommandés

- CâbleHDMI®/™ ultra haut débit (max. 3m)

Modèle

65NANO95* 65NANO97* 65NANO98* 65/75NANO99*

75NANO95* 75NANO97* 75NANO98*

VESA (A x B) (mm) 400x400 600x400

Achat séparé

Vis standard M6 M8 Nombre de vis 4 4

Des articles vendus séparément peuvent faire l’objet de remplacements ou de modifications sans préavis dans le but d’améliorer la qualité du

Support mural LSW440B LSW640B

produit. Contactez votre revendeur pour vous procurer ces articles. Ces périphériques fonctionnent uniquement avec certains modèles.

Le nom ou le design du modèle peut changer en cas de mise à niveau des fonctions du produit, des conditions de diffusion ou des politiques de confidentialité du fabricant.

+ 50 hidden pages