LG 65EC970T Owner’s Manual
OWNER’S MANUAL
Please read this manual carefully before operating your set and retain it
for future reference.
EC93**
EC97**
EG97**
www.lg.com
*MFL68601902*
P/NO : MFL68601902 (1409-REV01)
Printed in Korea
TABLE OF CONTENTS
2
ENGLISH
ENG
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE NOTICE
3 EXTERNAL CONTROL DEVICE
SETUP
4 SAFETY INSTRUCTIONS
9 - Viewing 3D Imaging
10 INSTALLATION PROCEDURE
10 ASSEMBLING AND PREPARING
10 Unpacking
12 Separate purchase
13 Parts and buttons
15 - Using the joystick button
16 Lifting and moving the TV
17 Setting up the TV
17 - Detaching the stand
18 - Attaching the AV cover
18 Mounting on a table
20 Mounting on a wall
21 Wall Type Set-up Guide
21 - How to detach the stand
23 Tidying cables
24 Using Built-in Camera
25 - Preparing Built-in Camera
25 - Name of Parts of Built-in camera
25 - Checking the Camera’s Shooting Range
35 REMOTE CONTROL
36 MAGIC REMOTE FUNCTIONS
37 Registering Magic Remote
37 How to use magic remote
37 Precautions to Take when Using the Magic
Remote
38 USING THE USER GUIDE
39 MAINTENANCE
39 Cleaning Your TV
39 - Screen, frame, cabinet and stand
39 - Power cord
39 TROUBLESHOOTING
40 ENVIRONMENTAL INFORMATION
40 WEEE
41 SPECIFICATIONS
26 MAKING CONNECTIONS
26 Antenna connection
27 HDMI connection
29 DVI to HDMI connection
30 Component connection
31 Composite connection
31 Audio connection
31 - Digital optical audio connection
32 Headphone connection
32 MHL connection
34 USB connection
WARNING
yIf you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.
CAUTION
y If you ignore the caution message, you may be
slightly injured or the product may be damaged.
NOTE
y The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such
distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is
valid for three (3) years from the date on which you purchased the product.
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
SAFETY INSTRUCTIONS
4
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y Do not place the TV and/or remote control in the
following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other
devices that produce heat
- Near kitchen counters or humidifiers where they
can easily be exposed to steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock,
malfunction or product deformation.
y Do not place the product where it might be exposed
to dust.
This may cause a fire hazard.
y Insert power cable plug completely into wall socket
otherwise if not secured completely into socket, fire
ignition may break out.
y Ensure the power cord does not come into contact
with hot objects such as a heater.
This may cause a fire or an electric shock hazard.
y Do not place a heavy object, or the product itself, on
power cables.
Otherwise, this may result in fire or electric shock.
y Mains Plug is the TV connecting/disconnecting
device to AC mains electric supply. This plug must
remain readily attached and operable when TV is
in use.
y Do not touch the power plug with wet hands. Ad-
ditionally, if the cord pin is wet or covered with dust,
dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y Make sure to connect Mains cable to compliant AC
mains socket with Grounded earth pin. (Except for
devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
y Bend antenna cable between inside and outside
building to prevent rain from flowing in.
This may cause water damaged inside the Product
and could give an electric shock.
y When mounting TV onto wall make sure to neatly
install and isolate cabling from rear of TV as to not
create possibility of electric shock /fire hazard.
y Do not plug too many electrical devices into a single
multiple electrical outlet.
Otherwise, this may result in fire due to overheating.
SAFETY INSTRUCTIONS
5
y Do not drop the product or let it fall over when con-
necting external devices.
Otherwise, this may result in injury or damage to the
product.
y Keep the anti-moisture packing material or vinyl
packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and
visit the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach of
children.
y Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause
serious injury.
y Dispose of used batteries carefully to ensure that
a small child does not consume them. Please seek
Doctor- Medical Attention immediately if child consumes batteries.
y Do not drop metallic objects such as coins, hair
pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children
must pay particular attention. Electrical shock, fire
or injury can occur. If a foreign object is dropped into
the product, unplug the power cord and contact the
service centre.
y Do not spray water on the product or scrub with an
inflammable substance (thinner or benzene). Fire or
electric shock accident can occur.
y Do not allow any impact, shock or any objects to
fall into the unit, and do not drop anything onto the
screen.
You may be injured or the product can be damaged.
y Never touch this product or antenna during a thun-
der or lighting storm.
You may be electrocuted.
ENGLISH
ENG
y Do not insert any metal objects/conductors (like a
metal chopstick/cutlery/screwdriver) between power
cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging
into the wall input terminal. You may be electrocuted. (Depending on model)
y Do not put or store inflammable substances near
the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
y Never touch the wall outlet when there is leakage of
gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
y Do not disassemble, repair or modify the product at
your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or
repair.
SAFETY INSTRUCTIONS
6
ENGLISH
ENG
y If any of the following occur, unplug the product im-
mediately and contact your local service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange smell
This may result in fire or electric shock.
y Unplug the TV from AC mains wall socket if you do
not intend to use the TV for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/
fire.
y Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
y If you install the TV on a stand, you need to take
actions to prevent the product from overturning.
Otherwise, the product may fall over, which may
cause injury.
y If you intend to mount the product to a wall, attach
VESA standard mounting interface (optional parts)
to the back of the product. When you install the set
to use the wall mounting bracket (optional parts), fix
it carefully so as not to drop.
y Only use the attachments / accessories specified by
the manufacturer.
y When installing the antenna, consult with a qualified
service technician. If not installed by a qualified
technician, this may create a fire hazard or an electric shock hazard.
y We recommend that you maintain a distance of at
least 2 to 7 times the diagonal screen size when
watching TV.
If you watch TV for a long period of time, this may
cause blurred vision.
CAUTION
y Install the product where no radio wave occurs.
y There should be enough distance between an
outside antenna and power lines to keep the former
from touching the latter even when the antenna
falls.
This may cause an electric shock.
y Do not install the product on places such as unsta-
ble shelves or inclined surfaces. Also avoid places
where there is vibration or where the product cannot
be fully supported. Otherwise, the product may fall
or flip over, which may cause injury or damage to
the product.
y Only use the specified type of battery.
This could cause damage to the remote control.
y Do not mix new batteries with old batteries. This
may cause the batteries to overheat and leak.
y Batteries should not be exposed to excessive heat.
For example, keep away from direct Sunlight, open
fireplace and electric heaters.
SAFETY INSTRUCTIONS
7
y Do not place non-rechargeable batteries in charging
device.
y Make sure there are no objects between the remote
control and its sensor.
y Signal from Remote Control can be interrupted due
to external/internal lighting eg Sunlight, fluorescent
lighting.If this occurs turn off lighting or darken viewing area.
y When connecting external devices such as video
game consoles, make sure the connecting cables
are long enough.
Otherwise, the product may fall over, which may
cause injury or damage the product.
y Do not turn the product On/Off by plugging-in or
unplugging the power plug to the wall outlet. (Do not
use the power plug for switch.)
It may cause mechanical failure or could give an
electric shock.
y Periodically examine the cord of your appliance,
and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer.
y Prevent dust collecting on the power plug pins or
outlet.
This may cause a fire hazard.
y Protect the power cord from physical or mechani-
cal abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where
the cord exits the appliance.
y Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil or pen, or make a
scratch on it, as it may cause damage to screen.
ENGLISH
ENG
y Please follow the installation instructions below to
prevent the product from overheating.
- The distance between the product and the wall
should be more than 10 cm.
- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a table-
cloth or curtain.
Otherwise, this may result in fire.
y Take care not to touch the ventilation openings
when watching the TV for long periods as the
ventilation openings may become hot. This does not
affect the operation or performance of the product.
y Avoid touching the screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary or permanent distortion/
damage to screen.
y When cleaning the product and its components,
unplug the power first and wipe it with a soft cloth.
Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe with
a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc.,
which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or
product damage (deformation, corrosion or breakage).
y As long as this unit is connected to the AC wall out-
let, it is not disconnected from the AC power source
even if you turn off this unit by SWITCH.
SAFETY INSTRUCTIONS
8
ENGLISH
ENG
y When unplugging the cable, grab the plug and un-
plug it, by pulling at the plug. Don’t pull at the cord
to unplug the power cord from the power board, as
this could be hazardous.
y When moving the product, make sure you turn
the power off first. Then, unplug the power cables,
antenna cables and all connecting cables.
The TV set or power cord may be damaged, which
may create a fire hazard or cause electric shock.
y When moving or unpacking the product, work in
pairs because the product is heavy.
Otherwise, this may result in injury.
y Contact the service centre once a year to clean the
internal parts of the product.
Accumulated dust can cause mechanical failure.
y Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
y The panel is a high technology display product with
resolution of two million to six million pixels. You
may see tiny black dots and/or brightly coloured
dots (red, blue or green) at a size of 1 ppm on the
panel. This does not indicate a malfunction and
does not affect the performance and reliability of the
product.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y You may find different brightness and colour of the
panel depending on your viewing position(left/right/
top/down).
This phenomenon occurs due to the characteristic
of the panel. It is not related with the product performance, and it is not malfunction.
y Displaying a still image (e.g., broadcasting channel
logo, on-screen menu, scene from a video game or
computer screen) for a prolonged time may cause
damage to the screen, resulting in retention of the
image, which is known as image sticking. It can remain for long time or never disappear. The warranty
does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s
screen for a prolonged period (1 or more hours for
OLED).
Also, if you watch the TV at a ratio of 4:3 for a long
time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
y If the product feels cold to the touch, there may be
a small “flicker” when it is turned on. This is normal,
there is nothing wrong with product.
y Generated Sound
“Cracking” noise: A cracking noise that occurs
when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and
humidity. This noise is common for products where
thermal deformation is required. Electrical circuit
humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product.
It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
y Do not use high voltage electrical goods near the
TV(e.g. electric mosquito-swatter). This may result
in product malfunction.
SAFETY INSTRUCTIONS
9
Viewing 3D Imaging
WARNING
Viewing Environment
y Viewing Time
- When watching 3D contents, take 5 - 15 minute
breaks every hour. Viewing 3D contents for a
long period of time may cause headache, dizzi-
ness, fatigue or eye strain.
Those that have a photosensitive seizure
or chronic illness
y Some users may experience a seizure or other
abnormal symptoms when they are exposed to a
ashing light or particular pattern from 3D contents.
y Do not watch 3D videos if you feel nausea, are
pregnant and/ or have a chronic illness such
as epilepsy, cardiac disorder, or blood pressure
disease, etc.
y 3D Contents are not recommended to those who
suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be
experienced.
y If you have strabismus (cross-eyed), amblyopia
(weak eyesight) or astigmatism, you may have
trouble sensing depth and easily feel fatigue due to
double images. It is advised to take frequent breaks
than the average adult.
y If your eyesight varies between your right and left
eye, revise your eyesight prior to watching 3D
contents.
CAUTION
Viewing Environment
y Viewing Distance
- Maintain a distance of at least twice the screen
diagonal length when watching 3D contents.
If you feel discomfort in viewing 3D contents,
move further away from the TV.
Viewing Age
y Infants/Children
- Usage/ Viewing 3D contents for children under
the age of 5 are prohibited.
- Children under the age of 10 may overreact and
become overly excited because their vision is in
development (for example: trying to touch the
screen or trying to jump into it. Special monitoring and extra attention is required for children
watching 3D contents.
- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than that of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
y Teenagers
- Teenagers under the age of 19 may react with
sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching
3D contens for a long time when they are tired.
y Elderly
- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV
than the recommended distance.
ENGLISH
ENG
Symptoms which require discontinuation
or refraining from watching 3D contents
y Do not watch 3D contents when you feel fatigue from
lack of sleep, overwork or drinking.
y When these symptoms are experienced, stop using/
watching 3D contents and get enough rest until the
symptom subsides.
- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball
pain, dizziness, nausea, palpitation, blurriness,
discomfort, double image, visual inconvenience
or fatigue.
Cautions when using the 3D glasses
y Make sure to use LG 3D glasses. Otherwise, you
may not be able to view 3D videos properly.
y Do not use 3D glasses instead of your normal
glasses, sunglasses or protective goggles.
y Using modied 3D glasses may cause eye strain or
image distortion.
y Do not keep your 3D glasses in extremely high or
low temperatures. It will cause deformation.
y The 3D glasses are fragile and are easily scratched.
Always use a soft, clean piece of cloth when wiping
the lenses.
Do not scratch the lenses of the 3D glasses with
sharp objects or clean/wipe them with chemicals.
10
A
A
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
y Image shown may differ from your TV.
y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y The available menus and options may differ from the input source or product model that you are using.
y New features may be added to this TV in the future.
y The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it
will not be watched for some time, as this will reduce energy consumption.
y The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and
this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Connect an external device to the TV set.
3 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few
minutes.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you
purchased your product.
The illustrations in this manual may differ from the actual product and item.
CAUTION
y Do not use any unapproved items to ensure the safety and product life span.
y Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
y Some models have a thin film attached on to the screen and this must not be removed.
NOTE
y The items supplied with your product may vary depending on the model.
y Product specifications or contents of this manual may be changed without prior notice due to upgrade of product func-
tions.
y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB
port.
B
B
A 10 mm
*
*B 18 mm
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Owner’s manual Remote control,
Cable Holder
(See p.23, 24)
AV Cover
(Only EC93**)
(See p.18)
batteries (AAA)
The remote control will not
be included for all sales
market.
(Depending on model)
(See p.35)
Component gender cable
(See p.30)
AV Cover
(Only EC97**)
(See p.18)
Magic remote,
Batteries (AA)
(See p.36)
Composite gender cable
(See p.30, 31)
AV Cover
(Only EG97**)
(See p.18)
Cinema 3D glasses
The number of 3D glasses
may differ depending on
the model or country.
HDMI Cable
(Only EC97**, EG97**)
(See p.27, 28)
Cable Managements
2 EA
(Only EC97**)
(See p.23)
Cable Management
Screws
2 EA, M4 x L10
(Only EC97**)
(See p.23)
Cleaning Cloth
(Depending on model)
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
Separate purchase
Separate purchase items can be changed or modied for quality improvement without any notication.
Contact your dealer to buy these items.
These devices only work with certain models.
AG-F***
Cinema 3D Glasses
LG Audio Device
Compatibility
AG-F***
Cinema 3D Glasses
AN-MR500
Magic Remote
AN-MR500
Magic Remote
EC93** EC97** EG97**
AN-VC5**
Video call camera
• • •
• • •
AG-F***DP
Dual Play Glasses
AN-VC5**
Video call camera
AG-F***DP
Dual Play Glasses
LG Audio Device • • •
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
•
• • •
ASSEMBLING AND PREPARING
13
Parts and buttons
A type : EC93**
<Front>
Speakers
Screen
Remote Control Sensor and
Intelligent Sensor
1
LG Logo Light
ENGLISH
ENG
<Rear>
B type : EC97**
Built-In Camera
Speakers
Remote Control Sensor
and Intelligent Sensor
LG Logo Light
Screen
Joystick button
1
2
Joystick button
3
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
C type : EG97**
LG Logo Light
<Front>
Built-In Camera
Speakers
Remote Control Sensor and
Intelligent Sensor
Screen
1
Joystick button
<Rear>
2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located behind the TV screen.
3 Joystick Button - This button is located below the TV screen.
NOTE
y You can set the LG Logo Light to on or off by selecting GENERAL in the main menus.
ASSEMBLING AND PREPARING
15
Using the joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic Functions
Power On
Power Off
Volume Control
Programmes
Control
When the TV is turned off, place your finger on the joystick button and press
it once and release it.
When the TV is turned on, place your finger on the joystick button and press
it once for a few seconds and release it.
If you place your finger over the joystick button and move it left or right, you
can adjust the volume level you want.
If you place your finger over the joystick button and move it up or down, you
can scrolls through the saved programmes you want.
ENGLISH
ENG
NOTE
y When your finger over the joystick button and push it to the up, down, left or right, be careful not to press the
joystick button. If you press the joystick button first, you may not be able to adjust the volume level and saved
programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , ) moving the joystick button left or right.
TV OFF Turns the power off.
CLOSE Clears on-screen displays and returns to TV viewing.
INPUT Changes the input source.
ENGLISH
ENG
16
ASSEMBLING AND PREPARING
Lifting and moving the TV
Please note the following advice to prevent the TV from
being scratched or damaged and for safe transportation
regardless of its type and size.
CAUTION
y Avoid touching the screen at all times, as this may
result in damage to the screen.
It is recommended to move the TV in the box or
y
packing material that the TV originally came in.
Before moving or lifting the TV, disconnect the
y
power cord and all cables.
When holding the TV, the screen should face away
y
from you to avoid damage.
When transporting a large TV, there should be at
y
least 2 people.
When transporting the TV by hand, hold the TV as
y
shown in the following illustration.
When transporting the TV, do not expose the TV to
y
jolts or excessive vibration.
When transporting the TV, keep the TV upright,
y
never turn the TV on its side or tilt towards the left or
right.
Do not apply excessive pressure to cause flexing /
y
bending of frame chassis as it may damage screen.
Be sure to keep your TV upright instead of laying or
y
tilting it while moving the TV.
When handling the TV, be careful not to damage the
y
protruding joystick button.
Hold the top and bottom of the TV frame firmly.
y
Make sure not to hold the transparent part, speaker,
or speaker grill area.
ASSEMBLING AND PREPARING
17
Setting up the TV
(Image shown may differ from your TV.)
Detaching the stand
(Only EC93**, EG97**)
1
Screen
(Only EC93**)
4 EA
M4 x L20
ENGLISH
ENG
(Only EC97**)
Back cover
1
8 EA
M4 x L20
(Only EG97**)
8 EA
M4 x L20
2
Screen
CAUTION
y When you assemble the stand, have the arrows on
the bottom of the stand base looking towards the
same direction as the screen.
y When detaching the stand, make sure to hold it
firmly while removing the screws to stop it from
falling.
2
Back cover
CAUTION
y When detaching the stand to the TV set, place the
screen(or back) facing down on a cushioned table
or flat surface to protect the screen(or back) from
scratches.
y Make sure that the screws are inserted correctly
and fastened securely. (If they are not fastened
securely enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and not
tighten correctly.
NOTE
y When you assemble the stand again, performing
the stand detaching in reverse.
Loading...