iiii _ _i_ I
Life's Good
ii iy
_,..J_Jp_ER <bMAN UAL
LED TV"
LG LED TVs are LCD TVs with LED backlighling.
Please read this manual carefully before operatin 9 your TV
and retain it for future reference.
4QUBSQQQ 49UB820Q 49UB830Q 65UB92QQ
55UB820Q 55UB83QQ
6QUB82QQ
_MFL67987292_
P/NO : MFL6T98T292 (1410-REV04)
wwwAg.com
2 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
Read these instructions.
Keep these instructions.
Follow all instructions.
Heed all warnings.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
liThe lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated dangerous voltage within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
-TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
_ WARNING
if you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
_)\, CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
_ NOTE
The note helps you understand and use
the product safely. Please read the note
• Do not allow the television to become wet.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
ptug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ
by country).
WARNING: This product contains chemicals
known to the State of California to cause
cancer and birth defects or other reproductive
harm. Wash hands after handling.
• Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil
or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS 3
•Protectthepowercordfrombeingwalkedon
orpinchedparticularlyatplugs,convenience
receptacles,andthepointwheretheyexit
fromtheapparatus.
•Onlyuseattachments/accessoriesspecified
bythemanufacturer.
•Useonlywithacart,stand,tripod,bracket,
ortablespecifiedbythemanufacturer,or
soldwiththeapparatus.Whenacartisused,
usecautionwhenmovingthecart/apparatus
combinationtoavoidinjuryfromtip-over.
•Unptugthisapparatusduringlightningstorms
orwhenunusedforlongperiodsoftime.
•Referallservicingtoqualifiedservice
personnel.Servicingisrequiredwhen
theapparatushasbeendamagedinany
way,suchaspower-supplycordorplugis
damaged,liquidhasbeenspilledorobjects
havefallenintotheapparatus,theapparatus
hasbeenexposedtorainormoisture,does
notoperatenormally,orhasbeendropped.
•Donotstickmetalobjectsoranyother
conductivematerialintothepowercord.Do
nottouchtheendofthepowercordwhileit
ispluggedin.
•Keepthepackinganti-moisturematerial
orvinylpackingoutofthereachof
children.Anti-moisturematerialisharmful
ifswallowed.Ifswallowedbymistake,
inducevomitingandgotothenearest
hospital.Additionally,vinylpackingcan
causesuffocation.Keepitoutofthereachof
children.
• CAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner's manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
walt outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
• Warning -To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
• Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
I
4 IMPORTANT SAFETY INSTRUCTIONS
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
As long as this unit is connected to the AC
walt outlet, it is not disconnected from the AC
power source even if the unit is turned off.
Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user's authority to operate this
product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSl/NFPA 70
• Cleaning
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
• Moving
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
• Ventilation
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
• If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
• Keep the product away from direct sunlight.
• Never touch this apparatus or antenna during
a lightning storm.
• When mounting aTV on the wall, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
• Do not allow an impact shock, any objects to
fall into the product, and do not drop anything
onto the screen.
• DISCONNECTING THE DEVICE FROM THE
MAIN POWER
The Power Plug is the disconnecting device.
In case of an emergency, the Power Plug
must remain readily accessible.
• Batteries
Store the accessories (battery, etc.) in a safe
location out of the reach of children.
• This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or allow
the batteries to overheat.
• Do not use high voltage electrical equipment
near the TV, (e.g. bug zapper).
This may result in product malfunction.
•DotDefect
Thepanetisahightechnologyproductwith
resolutionoftwomilliontosixmillionpixels.
Inaveryfewcases,youcouldseefinedots
onthescreenwhileyou'reviewingtheTV.
Thosedotsaredeactivatedpixetsanddonot
affecttheperformanceandreliabilityofthe
TV.
•GeneratedSound
CrackingnoiseAcrackingnoisethatoccurs
whenwatchingorturningofftheTVis
generatedbyplasticthermalcontraction
duetotemperatureandhumidity.Thisnoise
iscommonforproductswherethermal
deformationisrequired.
Electricalcircuithumming/panelbuzzing
Alowlevelnoiseisgeneratedfromahigh-
speedswitchingcircuit,whichsuppliesa
largeamountofcurrenttooperateaproduct.
Itvariesdependingupontheproduct.
Thisgeneratedsounddoesnotaffectthe
performanceandreliabilityoftheproduct.
•Takecarenottotouchtheventilation
openings.WhenwatchingtheTVforalong
period,theventilationopeningsmaybecome
hot.Thisdoesnotaffecttheperformanceof
theproductorcausedefectsintheproduct.
•Donotinstallthisproductonawallifit
couldbeexposedtooitoroitmist.Thismay
damagetheproductandcauseittofall.
•IftheTVfeelscotdtothetouch,theremay
beasmallflickerwhenitisturnedon.This
isnormal;thereisnothingwrongwithTV.
Someminutedotdefectsmaybevisibleon
thescreen,appearingastinyred,green,or
bluespots.However,theyhavenoadverse
effectontheTV'sperformance.Avoid
touchingtheLCDscreenorholdingyour
finger(s)againstitforlongperiodsoftime.
Doingsomayproducesometemporary
distortioneffectsonthescreen.
IMPORTANT SAFETY INSTRUCTIONS 5
• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
• If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
• Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
6 IMPORTANT SAFETY INSTRUCTIONS
For USA and Canada
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radioFV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device. Any
changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
This reminder is provided to call the CATV system installer's attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS 7
Viewing 3D Imaging (For 3D models)
WARNING
• Viewing Time
- When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long
period of time may cause headache, dizziness, fatigue or eye strain.
• Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D content.
• Do not watch 3D videos if you feet nauseous, are pregnant and/or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure disease, etc.
• 3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly.
Doubte images or discomfort in viewing may be experienced.
• If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may have
trouble sensing depth and easily feet fatigue due to double images, it is advised to take more
frequent breaks than the average adult.
• If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
content.
• Do not watch 3D content when you feet fatigue from lack of sleep, overwork, or intoxicatlon.
• When these symptoms are experienced, stop using/watching 3D content and get enough rest until
the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, doubte image, define visual inconvenience, or
fatigue.
I
8 IMPORTANT SAFETY INSTRUCTIONS
_CAUTION
• Viewing Distance
- Maintain a distance of at least twice the screen's diagonal length when watching 3D content. If you
feet discomfort in viewing 3D content, move further away from the TV.
• Infants / Children
- Usage/Viewing 3D content for children under the age of 5 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D content.
- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
• Teenagers
- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not
to watch 3D videos for a long time when they are tired.
• Elderly
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the
recommended distance.
• Only use LG 3D glasses. Otherwise, you may not be abte to view 3D videos properly.
• Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.
• Using modified 3D glasses may cause eye strain or image distortion.
• Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
• The 3D glasses are fragile and are easily scratched. Use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
L+CENSES / OPEN SOURCE SOFTWARE NOT+CE 9
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www./g.com.
_ 2.0+DigitalOut
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit httpJopensource./ge.com. In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are available for download.
LG Electronics wilt also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon emait request to
opensource@/ge.com. This offer is valid for three (3) years from the date on which you purchased the
prod uct.
NOTE
_oimage shown may differ from your TV.
I oYour TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
IoThe available menus and options may differ from the input source or product model that you are
using.
/o New features may be added to this TV in the future,
10 TABLE OF CONTENTS
TABLE OF CONTENTS
IMPORTANT SAFETY
2
INSTRUCTIONS
7 Viewing 3D Imaging (For 3D models)
9 LICENSES
9 OPEN SOURCE SOFTWARE
NOTICE
10 TABLE OF CONTENTS
11 INSTALLATION PROCEDURE
11 ASSEMBLING AND PREPARING
Unpacking
13
Optional Extras
14
Parts and Buttons
15
- Using the Joystick Button
11
16
Lifting and Moving the TV
17
Setting Up the TV
17
- Attaching the Stand
19
- Mounting on a Table
20
- Mounting on a Wall
21
- Tidying Cables
22
MAKING CONNECTIONS
22
Connecting to an Antenna or Cable
23
Connecting to an HD Receiver, DVD
Player, or VCR
23 - HDMI Connection
24 - DVI to HDMI Connection
25 - Connecting to a Mobile Phone
26 - Component Connection
27 - Composite Connection
2S Connecting to a PC
28 - HDMI Connection or DVI to HDMI
Connection
30 Connecting to an Audio System
30 - Digital Optical Audio Connection
31 Connecting a USB Device
32 REMOTE CONTROL
34 USINGTHE USER GUIDE
34 EXTERNAL CONTROL DEVICE
SETUP
35 SPECIFICATIONS
37 MAINTENANCE
.37 Cleaning Your TV
37 - Screen, Frame, Cabinet, and Stand
37 - Power Cord
.37 TROUBLESHOOTING
INSTALLATION PROCEDURE / ASSEMBLING AND PREPAR NG 11
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual I
product and item.
._//_._ CAUTION
I. Do not use any unapproved items to ensure the safety and product's lifespan.
IoAny damages or injuries by using unapproved items are not covered by the warranty.
.In case of some model, the thin film on screen is a part of TV, So don't take it off.
/
_@ NOTE
• The items supplied with your product may vary depending upon the
model
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMt cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV's USB port.
• Use a certified cable with the HDMt logo attached. If you do not use a certified HDMI cable, the
screen may not display or a connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®F Mcable
- High-Speed HDMI®F Mcable with Ethernet
*A < 10 mm (0.39 inches)
*B < 18 turn (0.7 inches)
12 ASSEMBLING AND PREPARING
(For UB8000/UB8200 Series)
Owner's Manual
(For UB8000/UB8200 Series)
Stand Screws
4EA, M4xL20
(See page 17.)
(For UB9200 Series)
Stand Base, Stand Body
(See page 18.)
Power Cord
(Depending upon model.)
(For UB8300 Series)
Stand Base
(See page 18.)
(For UB9200 Series)
Stand Screws
8 EA, M4 x L20
(See page 18.)
Stand Base
(See page 17.)
(For UB8300 Series)
Stand Screws
4EA, M4xL21
(See page 18.)
(For 40UBS000, 49UB8200,
49UB8300)
Ferrite core
(See page 13,)
Cable Holder
(See page 21.)
Cinema 3D Glasses
The number of 3D glasses
may differ depending upon
the model or country.
(Depending upon model.)
Cable Management
2 EA
(Depending upon model.)
(See page 21.)
Component Video Cable
(See page 26.)
Remote Control,
Batteries (AAA)
(See pages 32 and 33.)
Composite Video Cable
(See pages 26 and 27.)