LG 42LM620Y-TA, 32LM6200-TA, 47LM6200-TA, 47LM620Y-TA, 55LM6200-TA Owner's Manual

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating
your set and retain it for future reference.

P/NO : MFL67441726 (1203-REV03)
Printed in Korea

www.lg.com

LM62**
LM64**
LM66**
LM67**
LM76**

2

ENG

ENGLISH

TABLE OF CONTENTS

34 USING THE USER GUIDE

35 MAINTENANCE

35 Cleaning your TV
35 - Screen, frame, cabinet and stand

35 - Power cord

35 TROUBLESHOOTING

36 SPECIFICATIONS

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 SAFETY INSTRUCTIONS

10 - Viewing 3D Imaging (Only 3D models)

12 INSTALLATION PROCEDURE

12 ASSEMBLING AND PREPARING

12 Unpacking
15 Separate purchase
16 Parts and buttons
17 Lifting and moving the TV
18 Setting up the TV
18 - Attaching the stand
21 Mounting on a table
23 Mounting on a wall
24 Tidying cables

25 MAKING CONNECTIONS

25 Antenna connection
26 HDMI connection
27 DVI to HDMI connection
27 RGB-PC connection
28 Component connection
28 Composite connection
29 Audio connection
29 - Digital optical audio connection
29 USB connection

30 REMOTE CONTROL

32 MAGIC REMOTE CONTROL

FUNCTIONS

33 Registering Magic Remote Control
33 How to use Magic Remote Control
33 Precautions to Take when Using the Magic

Remote Control

WARNING

yIf you ignore the warning message, you may

be seriously injured or there is a possibility
of accident or death.

CAUTION

yIf you ignore the caution message, you may

be slightly injured or the product may be
damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

3

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an ofcial DivX Certied® device that plays

DivX video. Visit divx.com for more information and software tools to convert your

les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.

“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or

its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[e-mail]. This offer is valid for three (3) years from the date on which you purchased the
product.

4

ENG

ENGLISH

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

y

Do not place the TV and remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

y

Do not place the product where it might be exposed to dust.
This may cause a fire hazard.

y

Mains plug is the disconnecting device. The plug must remain readily operable.

y

Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.

y

Make sure to connect the power cable to the grounded current. (Except for devices
which are not grounded.)
You may be electrocuted or injured.

y

Fix the power cable completely.
If the power cable is not fixed completely, a fire can break out.

y

Ensure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.

y

Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.

y

Bend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.

y

When mounting a TV it on the wall, make sure not to install TV by hanging power
and signal cables on the back of the TV.
It may cause fire, electric shock.

5

ENGENGLISH

SAFETY INSTRUCTIONS

y

Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.

y

Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.

Desiccant

y

Keep the packing anti-moisture material or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.

y

Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.

y

Dispose of used batteries carefully to protect a child from eating them.
In case that it eats them, take it to see a doctor immediately.

y

Do not insert a conductor (like a metal chopstick) into one end of the power cable
while the other end is connected to the input terminal on the wall. Additionally, do
not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)

y

Do not put or store inflammable substances near the product.
There is a danger of explosion or fire due careless handling of the inflammable
substances.

y

Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.

y

Do not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.

y

Do not allow a impact shock or any objects to fall into the product, and do not drop
onto the screen with something.
You may be injured or the product can be damaged.

y

Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.

y

Never touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.

6

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.

y

If any of the following occur, unplug the product immediately and contact your local
service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

y

If you don’t intend to use the product for a long time, unplug the power cable from
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.

y

Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.

7

ENGENGLISH

SAFETY INSTRUCTIONS

CAUTION

y

Install the product where no radio wave occurs.

y

There should be enough distance between an outside antenna and power lines to
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.

y

Do not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.

y

If you install the TV on a stand, you need to take actions to prevent the product
from overturning. Otherwise, the product may fall over, which may cause injury.

y

If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.

y

Only use the attachments / accessories specified by the manufacturer.

y

When installing the antenna, consult a qualified service man.
This may create a fire hazard or an electric shock hazard.

5~7 times

y

We recommend that you maintain a distance of at least 5 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.

y

Only use the specified type of battery.
This could cause damage to the remote control.

y

Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.

y

Make sure there are no objects between the remote control and its sensor.

y

Signal from the remote control may be disturbed by sun light or other strong light.
In this case, darken the room.

y

When connecting external devices such as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.

8

ENG

ENGLISH

SAFETY INSTRUCTIONS

y

Do not turn the product On/Off by plugging-in or unplugging the power plug to the
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.

y

Please follow the installation instructions below to prevent the product from
overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

y

Take care not to touch the ventilation openings when watching the TV for long
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.

y

Periodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.

y

Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.

y

Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.

y

Do not press strongly upon the panel with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it.

y

Avoid touching the screen or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effects on the screen.

y

When cleaning the product and its components, unplug the power first and wipe it
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).

y

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.

y

When unplugging the cable, grab the plug and unplug it.
If the wires inside the power cable are disconnected, this may cause fire.

y

When moving the product, make sure you turn the power off first. Then, unplug the
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.

9

ENGENGLISH

SAFETY INSTRUCTIONS

y

When moving or unpacking the product, work in pairs because the product is
heavy.
Otherwise, this may result in injury.

y

Contact the service center once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.

y

Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.

y

If the product feels cold to the touch, there may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong with product.

y

The panel is a high technology display product with resolution of two million to six
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.

y

You may find different brightness and color of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.

y

Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.

y

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.

10

ENG

ENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging (Only 3D models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

ySome users may experience a seizure or other abnormal symptoms when they are exposed to a

ashing light or particular pattern from 3D contents.

yDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,

cardiac disorder, or blood pressure disease, etc.

y3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double

images or discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble

sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.

yIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the

symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

11

ENGENGLISH

SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

y Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yInfants/Children

- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.

yTeenagers

- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yElderly

- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the
recommended distance.

Cautions when using the 3D glasses

y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
y Using modied 3D glasses may cause eye strain or image distortion.
y Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
y The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping

the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.

12

ENG

ENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are

using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should

be turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture

is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.
yAny damag or injuries caused by using unapproved items are not covered by the manufacturer’s

warranty.
ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade

of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick

and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory

stick does not fit into your TV’s USB port.

A

B

A

B

*A

<

=

10 mm

*B

<

=

18 mm

13

ENGENGLISH

ASSEMBLING AND PREPARING

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P
A
G
E

FAV

3D

MUTE

1 2 3

4 5 6

7 809

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

Remote control and
batteries (AAA)

(Depending on model)
( See p. 30, 31)

P

Magic Remote Control,
Batteries (AA)

(Only 60LM645*,
32/42/47/55LM66**,
42/47/55LM67**,
42/47/55LM76**)
( See p. 32)

Owner’s manual

Polishing cloth

(Depending on model)
Use this to remove dust
from the cabinet.

Component video cable

( See p. 28)

Composite video cable

( See p. 28)

Cinema 3D Glasses

The number of 3D glasses
may differ depending on
the model or country.

Dual play glasses

(Depending on model)

Cable holder

(Depending on model)
( See p. 24)

Power Cord

(Only
32/37/42/47/55LM62**)

Stand Screws

8EA, M4 x 20
( See p. 18, 19, 20)

Desk-mount Screw

(1EA : Only
32/42/47LM62**,
32/42/47LM669*)
(2EA: Only 32LM64**,
32LM660*, 32LM661*)
( See p. 22)

Desk-mount Cable

2EA
(Only 32LM64**,
32LM660*, 32LM661*)
( See p. 22)

Bracket Screw

2EA, M4 x 8
(Only 32LM64**,
32LM660*, 32LM661*)
( See p. 22)

Wall mount inner spacers

4EA
(Only 32/42/47/55LM62**)
( See p. 24)

or

Isolator

(Depending on model)
( See p. 14)

14

ENG

ENGLISH

ASSEMBLING AND PREPARING

Stand Body / Stand Base

(Only 32/42/47/55/65LM62**, 32/42/47LM669*)
( See p. 18, 20)

Stand Body / Stand Base

(Only 32/42/47/55/60LM64**, 32/42/47/55LM660*, 32/42/47/55LM661*,
42/47/55LM67**, 42/47/55LM76**)
( See p. 19, 20)

NOTE

yAntenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact

might be heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

or

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection
or through other equipment with a connection to protective earthing - and to a cable distribution system

using coaxial cable, may in some circumstances create a re hazard. Connection to a cable distribution

system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

15

ENGENGLISH

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modied for quality improvement without any notication.

Contact your dealer to buy these items.
These devices only work with certain models.

P

AG-F2**DP, AG-F3**DP

Dual play glasses

AG-F2**, AG-F3**

Cinema 3D Glasses

AN-MR300

Magic Remote Control

AN-WF100

Wireless LAN

Compatibility

32/42/47/55/65LM62**,

32/42/47/55LM64**

60LM645*, 32/42/47/55LM66**,

42/47/55LM67**,

42/47/55LM76**

AG-F2**DP, AG-F3**DP

Dual play glasses

• •

AG-F2**, AG-F3**

Cinema 3D Glasses

•

•

(Depending on model)

AN-MR300

Magic Remote Control

• •

AN-WF100

Wireless LAN

•

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.

16

ENG

ENGLISH

ASSEMBLING AND PREPARING

B type : 32/42/47/55/65LM62** A type : 32/42/47/55/60LM64**,
32/42/47/55LM66**,
42/47/55LM67**,
42/47/55LM76**

Parts and buttons

Button Description

A type B type

H

Scrolls through the saved programmes.

H

Adjusts the volume level.

H

OK

ꔉ

Selects the highlighted menu option or confirms an input.

S SETTINGS Accesses the main menu, or saves your input and exits the menus.

INPUT Changes the input source.

/ I

Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 B type buttons are touch sensitive and can be operated through simple touch with your nger.

NOTE

yYou can set the power indicator light to on or off by selecting OPTION in the main menus.

SETTINGS

INPUT

OK

SETTINGS

INPUT

OK

Buttons

Touch buttons

2

Power indicator

Power indicator

Speakers Speakers

Remote control and

intelligent sensors

1

Remote control and
intelligent sensors

1

Screen Screen

17

ENGENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the box

or packing material that the TV originally came
in.

yBefore moving or lifting the TV, disconnect the

power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame rmly.

Make sure not to hold the transparent part,
speaker, or speaker grill area.

yWhen transporting a large TV, there should be

at least 2 people.

yWhen transporting the TV by hand, hold the TV

as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV upright,

never turn the TV on its side or tilt towards the
left or right.

yWhenever you handle TV, Protection pad

should be covered with side of TV. (Depending
on model)

Protection Pad

18

ENG

ENGLISH

ASSEMBLING AND PREPARING

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

42/47LM669*

Protection pad

M4 x 20

4EA

4

5

3

2

Wrapping bag

M4 x 20

4EA

Front

Stand Base

Stand Body

1

Top View

19

ENGENGLISH

ASSEMBLING AND PREPARING

42/47/55LM660*, 42/47/55LM661*, 42/47/55LM67**, 42/47/55LM76**

3

2

1

Protection pad

M4 x 20

4EA

4

5

Wrapping bag

M4 x 20

4EA

Front

Top View

Stand Base

Stand Body

20

ENG

ENGLISH

ASSEMBLING AND PREPARING

32/42/47/55/65LM62**, 32LM669*

32/42/47/55/60LM64**, 32LM660*, 32LM661*

M4 x 20

4EA

Front

Stand Base

Stand Body

1

2

Top View

3

M4 x 20

4EA

3

M4 x 20

4EA

1

2

M4 x 20

4EA

Front

Top View

Stand Base

Stand Body

21

ENGENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the
wall for proper ventilation.

2 Connect the power cord to a wall outlet.

CAUTION

yDo not place the TV near or on sources

of heat, as this may result in fire or other
damage.

10 cm

10 cm

10 cm

10 cm

CAUTION

yWhen attaching the stand to the TV

set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.

yMake sure that the screws are fastened

completely. (If they are not fastened securely
enough, the TV may tilt forward after being
installed.)
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.

NOTE

Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.

22

ENG

ENGLISH

ASSEMBLING AND PREPARING

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
(Only 32/42/47LM62**, 32/42/47LM669*)

(Only 32LM64**, 32LM660*, 32LM661*

)



M4 x 8

2EA

NOTE

(Only 32LM64**, 32LM660*, 32LM661*

)

How to fix the TV to a table

1 . Connect the Desk-mount Cables to the

Stand Base using the Bracket Screws.

2 . Fix the Desk-mount Cables to a table using

the Desk-mount Screws.

3 . Once the TV is fixed, move the table close

to the wall. Children may go in, causing
injuries.

WARNING

yTo prevent TV from falling over, the TV

should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.

Adjusting the angle of the TV to suit view

(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only 32/42/47/55/65LM62**, 32/42/47LM669*)

2020

Swivel 10 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only 32/42/47/55/60LM64**, 32/42/47/55LM660*,
32/42/47/55LM661*, 42/47/55LM67**,
42/47/55LM76**)

1010

CAUTION

When adjusting the angle of the product,
watch out for your fingers.

»

Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.

(Only 32/42/47/55/60LM64**,
32/42/47/55LM660*, 32/42/47/55LM661*,
42/47/55LM67**, 42/47/55LM76**)

<Rear> <Front>

23

ENGENGLISH

ASSEMBLING AND PREPARING

Mounting on a wall

Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the

oor. When you attach the TV to other building
materials, please contact qualied personnel.

LG recommends that wall mounting be performed

by a qualied professional installer.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in

the following table.

Separate purchase(Wall Mounting Bracket)

Model 32LM62**

32LM64**
32LM66**

42/47/55LM62**
42/47/55/60LM64**
42/47/55LM66**
42/47/55LM67**

42/47/55LM76**
VESA (A x B) 200 x 200 400 x 400
Standard screw M6 M6
Number of screws 4 4
Wall mount bracket LSW200BX,

LSW200BXG

LSW400BX,
LSW400BXG

Model

65LM62**

VESA (A x B)

600 x 400

Standard screw

M8

Number of screws

4

Wall mount bracket

LSW600B

A

B

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope.
Make sure to keep the rope horizontal with the

at surface.

CAUTION

yMake sure that children do not climb on or

hang on the TV.

NOTE

yUse a platform or cabinet that is strong and

large enough to support the TV securely.

yBrackets, bolts and ropes are not provided.

You can obtain additional accessories from
your local dealer.

24

ENG

ENGLISH

ASSEMBLING AND PREPARING

CAUTION

yDisconnect the power first, and then move

or install the TV. Otherwise electric shock
may occur.

yIf you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.

yDo not over tighten the screws as this may

cause damage to the TV and void your
warranty.

yUse the screws and wall mounts that meet

the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.

NOTE

yUse the screws that are listed on the VESA

standard screw specifications.

yThe wall mount kit includes an installation

manual and necessary parts.

yThe wall mount bracket is not provided. You

can obtain additional accessories from your
local dealer.

yThe length of screws may differ depending

on the wall mount. Make sure to use the
proper length.

yFor more information, refer to the manual

supplied with the wall mount.

yWhen attaching a third-party wall mounting

bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to
move your TV in vertical angle. Please make
sure not to use the spacers for LG wall
mounting bracket. (Only 32/42/47/55LM62**)

Wall Mount Inner Spacer

(Depending on model)

yIn order to protect the TV screen(scratch,

fingerprint), put TV on flat table without
removing wrapping bag.

yAfter removing the wrapping bag on the

back of the TV, install TV according to
manual included in wall mounting bracket
product.

yRemove protection pads after installing TV.

Tidying cables

Only 32/42/47/55/65LM62**, 32/42/47LM669*

1 Gather and bind the cables with the Cable

Holder.

Cable Holder

Only 32/42/47/55/60LM64**, 32/42/47/55LM660*,
32/42/47/55LM661*, 42/47/55LM67**,
42/47/55LM76**

1 Gather and bind the cables with the Cable

Management.

2 Fix the Cable Management rmly to the TV.

Cable Holder

Cable Management

CAUTION

Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur.

25

ENGENGLISH

MAKING CONNECTIONS

MAKING
CONNECTIONS

This section on MAKING CONNECTIONS mainly
uses diagrams for the LM76** models.

Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.

NOTE

yThe external device connection may differ

from the model.

yConnect external devices to the TV

regardless of the order of the TV port.

yIf you record a TV program on a DVD

recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.

yRefer to the external equipment’s manual for

operating instructions.

yIf you connect a gaming device to the TV,

use the cable supplied with the gaming
device.

yIn PC mode, there may be noise associated

with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.

yIn PC mode, some resolution settings may

not work properly depending on the graphics
card.

Antenna connection

Connect the TV to a wall antenna socket with an
RF cable (75 Ω).

IN

ANTENNA/CABLE

NOTE

yUse a signal splitter to use more than 2 TVs.
yIf the image quality is poor, install a signal

amplifier properly to improve the image
quality.

yIf the image quality is poor with an antenna

connected, try to realign the antenna in the
correct direction.

yAn antenna cable and converter are not

supplied.

26

ENG

ENGLISH

MAKING CONNECTIONS

HDMI connection

Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.

Choose any HDMI input port to connect. It does
not matter which port you use.

2 3 1

(ARC)

4

(PC)

IN

HDMI

NOTE

yIt is recommended to use the TV with the

HDMI connection for the best image quality.

yUse the latest High Speed HDMI™ Cable

with CEC (Customer Electronics Control)
function.

yHigh Speed HDMI™ Cables are tested to

carry an HD signal up to 1080p and higher.

ySupported DTV Audio: MPEG, Dolby Digital,

Dolby Digital Plus, HE-AAC

ySupported HDMI Audio format : Dolby

Digital, PCM (Up to 192 KHz, 32k/44.1k/48k
/88k/96k/176k/192k, DTS Not supported.)

(*Not Provided)

DVD/ Blu-Ray / HD Cable
Box / HD STB / PC

ARC (Audio Return Channel)

y

An external audio device that supports
SIMPLINK and ARC must be connected
using HDMI IN 1 (ARC) port.

y

When connected with a high-speed
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.

27

ENGENGLISH

MAKING CONNECTIONS

DVI to HDMI connection

Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.

Choose any HDMI input port to connect. It does
not matter which port you use.

DVI OUT

AUDIO OUT

IN

(RGB/HDMI-PC)

AUDIO

2 3 1

(ARC)

4

(PC)

IN

(*Not Provided)

DVD/ Blu-Ray / HD Cable Box / PC

NOTE

yDepending on the graphics card, DOS mode

may not work if a HDMI to DVI Cable is in
use.

yIt is recommended to connect the DVI-HDMI to

HDMI IN 4.

RGB-PC connection

Transmits the video signal from PC to the TV. To
transmit an audio signal, connect an audio cable.

RGB OUT (PC)

AUDIO OUT

IN

(RGB/HDMI-PC)

AUDIO

(PC)

RGB

(*Not Provided)

PC

28

ENG

ENGLISH

MAKING CONNECTIONS

Composite connection

Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the composite cable as
shown.

VIDEO

MONO

( )

AUDIOL R

IN

COMPONENT

AV

P

B

PR Y

VIDEO

AUDIO

RED

RED

RED

WHITE

WHITE

WHITE

YELLOW

YELLOW

YELLOW

VCR / DVD / Blu-Ray
/ HD Cable Box

(Use the composite video
cable provided.)

(*Not Provided)

Component connection

Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.

VIDEO

AUDIO

L R

IN

COMPONENT

AV

P

R

PB Y

VIDEO

AUDIO

NOTE

yIf cables are installed incorrectly, it could

cause the image to display in black and
white or with distorted colour.

RED RED RED

BLUE BLUE BLUE

GREEN GREEN GREEN

RED RED RED

WHITE WHITE WHITE

YELLOW

DVD / Blu-Ray /
HD Cable Box

(Use the composite
video cable provided.)

(*Not Provided)

GREENYELLOW

YELLOW

(Use the component
video cable provided.)

29

ENGENGLISH

MAKING CONNECTIONS

Audio connection

You may use an optional external audio system
instead of the built-in speaker.

NOTE

yIf you use an optional external audio device

instead of the built-in speaker, set the TV
speaker feature to off.

Digital optical audio connection

Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.

OPTICAL

AUDIO IN

OUT

OPTICAL

DIGITAL

AUDIO

NOTE

yDo not look into the optical output port.

Looking at the laser beam may damage
your vision.

yAudio with ACP (Audio Copy Protection)

function may block digital audio output.

Digital Audio System

(*Not Provided)

USB connection

Connect a USB storage device such as a USB

ash memory, external hard drive, or a USB

memory card reader to the TV and access the

Smart Share menu to use various multimedia les.

USB Apps

3

USB Hub

2

HDD IN

USB IN

1

USB

Hub

HDD

NOTE

yTo use a USB Hub device, make sure that it

is connected to the USB IN 2 USB Hub port.

ySome USB Hubs may not work. If a USB

device connected using a USB Hub is not
detected, connect it to the USB port on the
TV directly.

(*Not Provided)

(*Not Provided)

30

ENG

ENGLISH

REMOTE CONTROL

REMOTE CONTROL

(Depending on model)
The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the

and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

yDo not mix old and new batteries, as this may damage the remote control.
yIn Analogue TV and some countries, some remote control keys may not work.

Make sure to point the remote control toward the remote control sensor on the TV.

3D

Used for viewing 3D video.

TV/RAD

Selects Radio, TV and DTV programme.

GUIDE

Shows programme guide.

INFO

Views the information of the current
programme and screen.

SUBTITLE

Recalls your preferred subtitle in digital mode.

Q. MENU

Accesses the quick menus.

INPUT

Changes the input source.

LIST

Accesses the saved programme list.

Q.VIEW

Returns to the previously viewed programme.

HOME

Accesses the Home menus.

MY APPS

Shows the list of Apps.
Navigation buttons (up/down/left/right)

Scrolls through menus or options.

OK

Selects menus or options and confirms your
input.

(Back)

Returns to the previous level.

EXIT

Clears on-screen displays and return to TV
viewing.

FAV

Accesses your favourite programme list.

(User Guide)

Sees user-guide.

PAGE

Moves to the previous or next screen.

1

Colour buttons

These access special functions in some
menus.
( : Red, : Green, : Yellow, : Blue)

LIVE TV

Return to LIVE TV.
Control buttons (

)
Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK or
DVR).

REC

Uses to adjust DVR menu.

2

TELETEXT BUTTONS

These buttons are used for teletext.
For further details, see the ‘Teletext’ section.

(Only LM669*)

GUIDE

LIST

HOME MY APPS

FAV

Q.VIEW

INPUT

POWER

TV/RAD

SUBTITLE
Q.MENU

P
A
G
E

P

EXIT

INFO

MUTE

REC

LIVE TV

T.OPT

TEXT

1

2