LG 55US662H0ZC INSTALLATION MANUAL
INSTALLATION MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
US66*
US76*
WS96*
ES96*
*mfl71684501*
(2004-REV13)
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
2
Table of contents
ENGLISH
4 Location and Function of Controls
4 Parts and Button
4 Basic functions
4 LED Clock Connection
5 First Use Wizard
6 Basic Settings
6 - Language & Location
7 - Network Settings
8 - Portal Settings
9 - Voice Service Coverage
10 Data Cloning
10 Solution Settings
10 - Language & Location selection
11 - Automatically for Setup
16 - Manually for Setup
19 Installation Menu Settings
20 Installation Menu
20 Introduction
21 LG Hotel Mode Setup
21 - Power On Status
22 - Volume
22 - Key Management
23 - Limited Mode
23 - DTV Programme Update
24 - Power On Default
24 - Aux Source Setting
24 - Power Management
24 - R adio Video Blank
24 - Factory Reset
25 Network
25 - MAC Address
25 - Network Settings
26 - LG Connect
26 - IP Stream Control
26 - Wake On LAN
26 - VLAN ID
26 - Ping Test
27 Pro:Centric
27 - Mode
27 - WORF
27 - Room Number Setting
27 - Media Type
28 - Receive Data
28 - Native EPG
29 General
29 - Configuration Setup
34 - External Speaker
34 - Set ID Setup
34 - Power Saving
35 - HCEC Setup
36 - Clock Setup
37 - Crestron
37 - Welcome Video Mode
37 - Developer Mode
37 - Security
38 Portal Settings
38 - Portal Mode
38 - Auto Start
38 - PreLoaded App
39 - Website Shortcut
39 - Input Shortcut
40 - Hotel Directory
40 - Portal Editor
41 - Portal Manager
43 Media Share
43 - Smart Share
43 - Screen Share
43 - Media Renderer
43 - DIAL
43 - TV Name
44 - SoftAP
45 - Beacon
46 TV Manager
46 - Diagnostics
51 - USB Download Menu
3
56 IR Codes
57 External control device Setup
57 RS-232C Setup
57 Phone jack Type
57 Type of Connector : D-Sub 9-Pin Male
58 RS-232C Configurations
58 Communication Parameters
58 IR OUT Using Guide
58 - Suitable / Not Recommend remote-controller data
format
58 - IR Receiver specifications
59 Command Reference List
60 Transmission / Receiving Protocol
ENGLISH
4
Location and Function of Controls
ENGLISH
Parts and Button
Basic functions
LED Clock Connection
(Depending on model)
This TV can be connected to a LED Clock via the CLOCK port.
CLOCK
LED Clock
(*Not Provided)
Power On (Press)
Power O1 (Press and Hold)
Menu Control (Press2)
Menu Selection (Press and Hold3)
1 All running apps will close.
2 You can access and adjust the menu by pressing the button when
TV is on.
3 You can use the function when you access menu control.
5
First Use Wizard
* Images shown may differ from your TV.
(Depending on model)
• There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by Start
button.
ENGLISH
6
Basic Settings
ENGLISH
(Depending on model)
This menu is for basic settings related to language, network, portal, voice service coverage and programme tuning without SI (Pro:Centric) setting. There
are four steps for it.
Language & Location
(Depending on model)
• Select the Language and Country. Some countries need to select the Time Zone.
7
Network Settings
(Depending on model)
• Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 25)
Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK)
ENGLISH
8
Portal Settings
ENGLISH
(Depending on model)
(Depending on model)
• Set the Portal Mode and Portal Auto Start.
Portal Mode
• You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Por tal’ (Use editable Portal), or ‘None’ (Do not use por tal).
Portal Auto Start
• You can select ‘On’ or ‘Off’. If you select ‘On’, Portal (Home Launcher) will be execute automatically after TV on.
9
Voice Service Coverage
(Depending on model)
• Set the voice service coverage. You can set LG Service Country and Ser vice Area Postcode(Depending on model) for voice service.
ENGLISH
10
Data Cloning
ENGLISH
(Depending on model)
Access Data cloning menu of TV Manager application for applying cloning le.
Solution Settings
(Depending on model)
The Pro:Centric Platform enables you to simply install, manage and use guest- centric solutions. The default Domain “procentric.local” and IP Server
Address are needed to be registered in DNS TV will contact the IP Ser ver using the default Domain “procentric.local” via IP on server search page. If TV
doesn’t contact the Server, TV will search the pre- dened programme earlier than all programmes. (Only DVB-C)
The frequencies of pre-dened programmes are below.
• Germany: ‘51000, 858000, 778000, 698000, 618000, 538000, 458000, 378000, 298000, 218000, 138000 KHz’.
• Philippines 6 MHz: ‘57000, 651000, 591000, 531000, 471000, 411000, 351000, 291000, 231000, 171000, 111000 KHz’.
• Other Country: ‘50000, 842000, 762000, 682000, 602000, 522000, 442000, 362000, 282000, 202000, 122000 KHz’.
Language & Location selection
(Depending on model)
• Please select the Language and Country. Some countries need to select the Time Zone.
11
Automatically for Setup
(Depending on model)
1 From the TV Conguration Options screen, you can choose how to proceed with the conguration of this TV. Whether you will congure the T V
for Pro:Centric operation via the wizard or use a USB memory device to congure the TV, you may rst wish to set the Room Number on the TV.
Also, you can congure the network environment.
• Complete initial download of maintenance(On/Off Toggle): you can choose the option whether to skip the maintenance files download during the
EZ-Manager process.
• If you intend to set Room Number as part of the TV configuration, use the Room Number option to assign the Room # for this T V before you continue
with additional configuration.
• In the Label field, use the Left/Right arrow keys to specify a North, South, East, or West designation for this TV.
• In the Room Number field, you can use the number keys on the Installation Remote to direct enter a room number or use the vir tual keyboard on the
TV screen.
ENGLISH
12
ENGLISH
• If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 46)
• If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Settings” on
page 25)
Wireless (Auto Wi-Fi) : Connect a default hidden SSID/PW. (SSID : lgwebostv, PW : procentric, Security : WPA/WPA2 PSK)
13
ENGLISH
14
2 This step automatically searches for the Pro:Centric Ser ver. If was found the Pro:Centric data programme, select the Next.
ENGLISH
15
3 Downloading the Pro:Centric application les takes few minutes.
4 After the installation is completed, the following screen will be displayed.
ENGLISH
16
Manually for Setup
ENGLISH
(Depending on model)
1 Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To
continue, move and select Next.
2 Please select the Manual Pro:Centric.
17
3 Congure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)
ENGLISH
18
ENGLISH
4 Downloading the Pro:Centric application les takes few minutes.
19
5 After the installation is completed, the following screen will be displayed.
Installation Menu Settings
(Depending on model)
Access Installation menu for commercial feature settings.
ENGLISH
20
Installation Menu
ENGLISH
* Images shown may differ from your TV.
Introduction
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’.
The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient
operation for Hotelier and System Integrators.
1 Press the Setting button for more than 5 seconds using the user remote control, banner will appear at top left on the screen.
2 Enter a four digit password and press button.
- The TV is set with the initial password “1-1-0-5”.
Loading...