LG 55UH6230, 49UH6230 Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV* * LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

49UH6230 55UH6230 43UF6400 49UF6400

43UF6430 49UF6430 55UF6430 49UF6490 65UF6490

55UF6450 65UF6450

55UF6790 65UF6790

43UF6800 49UF6800 55UF6800 65UF6800

43UF6900 49UF6900

60UF7300 70UF7300

*MFL68741508*

www.lg.com

P/No : MFL68741508 (1603-REV02)

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important operating

ENGLISH

and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

• Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• CAUTION concerning the Power Cord (Can differ by country): Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

ENGLISH

• Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power Supply

Circuit Breaker

• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

• Outdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the

ENGLISH

precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

• Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

• Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

• If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a lightning storm.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

• DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

• Batteries Store the accessories (battery, etc.) in a safe location out of the reach of children.

• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper). This may result in product malfunction.

• Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Generated Sound Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

FCC Notice

(For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ENGLISH

FCC Radio Frequency Interference Requirements (for UNII devices)

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

FCC RF Radiation Exposure Statement

[For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the radiator and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.

Industry Canada Statement

(For Canada) [For having wireless function (WLAN, Bluetooth,...)]

ENGLISH

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1 This device may not cause interference; and 2 This device must accept any interference,

including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

(For Canada) [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

WARNING

(For Canada) [For product having the wireless function using

5 GHz frequency bands] 1 The device for operation in the band 5150–5250

MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

2 For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

3 For devices with detachable antenna(s), the

maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-topoint operation as appropriate; and

4 The worst-case tilt angle(s) necessary to remain

compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.(devices operating in the band 5250-5350 MHz with a maximum e.i.r.p. greater than 200 mW)

5 High-power radars are allocated as primary

users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-

LAN devices.

Note to Cable/TV Installer

(For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

Preparing

Optional Extras

NOTE

• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

• The available menus and options may differ from the input source or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending upon the model.

• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types (3 m or less)

- High-Speed HDMI®/

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

cable

cable with Ethernet

CAUTION

• Do not use any unapproved items to ensure the safety and product’s lifespan.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

• Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

• Do not fasten the screws with excessive force; otherwise, they may be worn out and become loose.

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.

(Depending upon model)

AN-VC550

Smart Camera

AN-WF500

Wi-Fi/Bluetooth Dongle

AN-MR600

Magic Remote

LG Audio Device

Maintenance

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan.

CAUTION

• Before cleaning, turn the power off and disconnect the power cord and all other cables.

• When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

• Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power Cord

Remove the accumulated dust or dirt on the power cord regularly.

ENGLISH

Lifting and Moving the TV

Using the Joystick Button

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

ENGLISH

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

CAUTION

• Avoid touching the screen at all times, as this may result in damage to the screen.

• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

(Depending upon model) (Image shown may differ from your TV.)

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

NOTE

43/49UF6400 does not have a Joystick button but has only a power On/Off button.

Joystick Button

Basic Functions

When the TV is turned off,

Power On

Power Off

Volume Control

Channels Control

place your finger on the joystick button, press it once, and release it.

When the TV is turned on, place your finger on the joystick button, press it once for a few seconds, and release it. All running apps will close.

If you place your finger over the joystick button and move it left or right, you can adjust the volume level.

If you place your finger over the joystick button and move it up or down, you can scroll through the saved channels.

NOTE

• With your finger over the joystick button, move it up, down, left, or right. Be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust the volume level and/or scroll through saved

channels.

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can adjust the menu items moving the joystick button up, down, left, or right.

Turns the power off. Accesses the quick settings. Clears on-screen displays and returns to TV viewing.

Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

(4 inches)

10 cm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a Wall (optional)

(Depending upon model)

CAUTION

• Make sure that children do not climb on or hang on the TV.

NOTE

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

ENGLISH

1 Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

10 cm

(4 inches)

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

10 cm

Model

VESA (A x B) Standard screw Number of

screws Wall mount

bracket (optional)

Model

VESA (A x B) Standard screw Number of

screws Wall mount

bracket (optional)

43UF6400 43UF6430 43UF6800 43UF6900

200 x 200 300 x 300 M6 M6

4 4

MSW240 LSW240B

60UF7300 65UF6450 65UF6490 65UF6790 65UF6800 300 x 300 600 x 400

M6 M8

4 4

LSW350B LSW640B

ENGLISH

CAUTION

• Disconnect the power before moving or

installing the TV. Otherwise electric shock may occur.

• Remove the stand before installing the TV on a

wall mount by performing the stand attachment in reverse.

• If you install the TV on a ceiling or slanted wall,

it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

• Do not overtighten the screws as this may cause

damage to the TV and void your warranty.

• Use the screws and wall mounts that meet the

VESA standard. Any damages or injuries by misuse or using an improper accessory are not

covered by the warranty.

NOTE

• Use the screws that are listed in the VESA

standard screw specifications.

• The wall mount kit includes an installation

manual and necessary parts.

• The wall mount bracket is optional. You can

obtain additional accessories from your local dealer.

• The length of screws may differ depending upon

the wall mount. Make sure to use the proper length.

• For more information, refer to the manual

supplied with the wall mount.

49/55UH6230 49UF6400 49/55UF6430 49UF6490 55UF6450 55UF6790 49/55UF6800 49UF6900

MSW240 LSW350B

70UF7300

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on an external device’s connection, refer to the manual provided with

each device.

NOTE

• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

• The external device connections shown may differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless of the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

• Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

• Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.

• (Smart TV Only) The TV may be capable of operating without a set-top from a multichannel video programming distributor (MVPD).

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The RF cable may not be supplied, depending upon the model.

CAUTION

• Make sure not to bend the copper wire of the RF cable.

Copper wire

• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby Digital.

• Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal.

• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model)

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided.

NOTE

• j j j PICTURE j HDMI ULTRA HD Deep Color:

- On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 60 Hz (4:2:0)

• If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV ’s HDMI ULTRA HD Deep Color setting to Off.

- This feature is available only on certain models which support HDMI ULTRA HD Deep Color.

• HDMI Audio Supported Format: PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Depending upon model)

Remote Control

(Image shown may differ from your TV.) The descriptions in this manual are based on

the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

and ends

CAUTION

• Do not mix old and new batteries, as this may damage the remote control.

(POWER) Turns the TV on or off.

INPUT Changes the input source.

CAPTION Activates or deactivates the subtitles.

(User Guide) Sees user-guide.

RATIO Resizes an image. TV Returns to the last TV channel. Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as

2-1 and 2-2.

LIST Accesses the saved channel list. FLASHBK Alternates between the two last

channels selected (pressing repeatedly).

VOL Adjusts the volume level.

FAV Accesses your favorite channel list.

Shows information on the current program.

INFO MUTE Mutes all sounds.

CH Scrolls through the saved channels. PAGE

Moves to the previous or next screen.

ENGLISH

Licenses

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

Open Source Software Notice Information

RECENT Shows the previous history.

(Home) Accesses the Home menu.

MY APPS Shows the list of Apps.

ENGLISH

Accesses the quick menu.

LIVE MENU Shows the list of Channels. Navigation buttons (up/down/left/right) Scrolls

through menus or options.

Selects menus or options and confirms your

input.

BACK Returns to the previous screen.

EXIT Clears all on-screen displays and returns to

TV viewing. SLEEP Sets the length of time until the TV to turns

off.

Enables VD function. SAP (Secondary Audio Program) Feature can also be enabled by pressing the key.

Control buttons (

SIMPLINK compatible devices (USB, SIMPLINK). Color Buttons These access special functions in

some menus. (

, , , , ) Controls the

)

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit In ad

dition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to

opensource@lge.com

(3) years from the date on which you purchased the product.

http://opensource.lge.com

. This offer is valid for three

External Control Device Setup

To obtain the external control device setup information, please visit (Depending upon model)

www.lg.com.

Troubleshooting

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed over the receiver.

- Check if there is any obstacle between the product and the remote control.

- Replace the batteries with new ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by connecting other products.

• The TV turns off suddenly.

- Check the power control settings. The power supply may be interrupted.

- Check if the Sleep Timer / Timer Power Off feature is activated in the TIMERS settings.

- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Television System

ATSC, NTSC-M, 64 & 256 QAM

Program Coverage

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

External Antenna Impedance

75 Ω

Environment Condition

• Operating Temperature

0 °C to 40 °C

• Operating Humidity

Less than 80 %

• Storage Temperature

- 20 °C to 60 °C

• Storage Humidity

Less than 85 %

Wireless LAN module (WN8122E1) specification

(For UH6230, UF6400, UF6430, UF6450, UF6490, UF6790, UF6800 series)

Standard IEEE802.11a/b/g/n

Frequency range

Output power (Max.)

• Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.

• This device should be installed and operated with minimum distance 20 cm (7.8 inches) between the device and your body. And this phrase is for the general statement for consideration of user environment.

• Contains FCC ID: BEJWN8122E1 / Contains IC: 2703H-WN8122E1

2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz

802.11a: 16.5 dBm

802.11b: 16 dBm

802.11g: 15.5 dBm

802.11n - 2.4 GHz: 15.5 dBm

802.11n - 5 GHz: 16.5 dBm

Wireless Module (LGSBW41) Specifications

(For UF6900, UF7300 series)

Wireless LAN Bluetooth

Standard IEEE 802.11a/b/g/n Standard

Frequency range

Output power (Max.)

• Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.

• Contains FCC ID: BEJLGSBW41 / Contains IC: 2703H-LGSBW41

2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz

802.11a: 11.5 dBm

802.11b: 11 dBm

802.11g: 10.5 dBm

802.11n - 2.4 GHz: 11 dBm

802.11n - 5 GHz:

12.5 dBm

Frequency range

Output power (Max.)

Bluetooth Version

4.0 2400 to

2483.5 MHz

10 dBm or Lower

ENGLISH

MODELS

Dimensions (W x H x D)

Weight

Power requirement Current Value / Power consumption

Dimensions (W x H x D)

Weight

Power requirement Current Value / Power consumption

ENGLISH

Dimensions (W x H x D)

Weight

Power requirement Current Value / Power consumption

Dimensions (W x H x D)

Weight

Power requirement Current Value / Power consumption 1.4 A / 140 W 0.9 A / 90 W 1.1 A / 110 W

With stand

Without stand

With stand 9.3 kg (20.5 lbs)

Without stand

MODELS

With stand

Without stand

With stand 14.4 kg (31.7 lbs) Without stand

MODELS

With stand

Without stand

With stand Without stand

MODELS

With stand

Without stand

With stand Without stand

43UF6400

(43UF6400-UA)

976 x 621 x 208.7 (mm)

38.4 x 24.4 x 8.2 (inches) 976 x 583 x 81.5 (mm)

38.4 x 22.9 x 3.2 (inches)

9.0 kg (19.8 lbs) 11.7 kg (25.7 lbs) 10.5 kg (23.1 lbs)

1.0 A / 100 W 1.1 A / 110 W 1.05 A / 105 W

49UF6430

(49UF6430-UB)

49UF6490

(49UF6490-UB)

49UH6230

(49UH6230-UB)

1,104 x 708 x 231 (mm)

43.4 x 27.8 x 9.0 (inches)

1,104 x 645 x 56.7 (mm)

43.4 x 25.3 x 2.2 (inches)

14.0 kg (30.8 lbs) 10.5 kg (23.1 lbs) 14.0 kg (30.8 lbs)

1.1 A / 110 W 1.05 A / 105 W 1.1A / 110 W

55UF6450

(55UF6450-UA)

55UF6800

(55UF6800-UA)

1,240 x 778 x 237 (mm) 1,460 x 902 x 263 (mm) 1,240 x 785 x 231 (mm)

48.8 x 30.6 x 9.3 (inches) 57.4 x 35.5 x 10.3 (inches) 48.8 x 30.9 x 9.0 (inches)

1,240 x 722 x 56.7 (mm)

48.8 x 28.4 x 2.2 (inches)

18.1 kg (39.9 lbs)

17.8 kg (39.2 lbs)

1.3A / 130 W 1.4 A / 140 W 1.3A / 130 W

65UF6790

(65UF6790-UB)

1,460 x 909 x 279 (mm) 971 x 624 x 198 (mm)

57.4 x 35.7 x 10.9 (inches) 38.2 x 24.5 x 7.7 (inches) 1,460 x 846 x 58.5 (mm) 971 x 575 x 58.7 (mm) 1,103 x 650 x 58.7 (mm)

57.4 x 33.3 x 2.3 (inches) 38.2 x 22.6 x 2.3 (inches) 43.4 x 25.5 x 2.3 (inches)

28.3 kg (62.3 lbs) 11.0 kg (24.2 lbs) 14.7 kg (32.4 lbs)

27.0 kg (59.5 lbs) 10.7 kg (23.5 lbs) 14.4 kg (31.7 lbs)

49UF6400

(49UF6400-UA)

1,108 x 696 x 208.7 (mm) 971 x 628 x 179 (mm)

43.6 x 27.4 x 8.2 (inches) 38.2 x 24.7 x 7.0 (inches) 1,108 x 657 x 81.5 (mm) 971 x 570 x 56.4 (mm)

43.6 x 25.8 x 3.2 (inches) 38.2 x 22.4 x 2.2 (inches)

12.0 kg (26.4 lbs) 10.8 kg (23.8 lbs)

AC 100-240 V ~ 50/60 Hz

43UF6800

(43UF6800-UA)

971 x 628 x 180 (mm) 1,104 x 701 x 237 (mm)

38.2 x 24.7 x 7.0 (inches) 43.4 x 27.5 x 9.3 (inches)

971 x 570 x 56.4 (mm) 1,104 x 645 x 56.7 (mm)

38.2 x 22.4 x 2.2 (inches) 43.4 x 25.3 x 2.2 (inches)

10.8 kg (23.8 lbs) 14.3 kg (31.5 lbs)

AC 100-240 V ~ 50/60 Hz

65UF6450

(65UF6450-UA)

65UF6490

(65UF6490-UA)

65UF6800

(65UF6800-UA)

1,460 x 846 x 58.5 (mm) 1,240 x 722 x 56.7 (mm)

57.4 x 33.3 x 2.3 (inches) 48.8 x 28.4 x 2.2 (inches)

27.4 kg (60.4 lbs) 18.2 kg (40.1 lbs)

27.0 kg (59.5 lbs) 17.8 kg (39.2 lbs)

AC 100-240 V ~ 50/60 Hz

43UF6900

(43UF6900-UC)

AC 100-240 V ~ 50/60 Hz

1,103 x 698 x 198 (mm)

43.4 x 27.4 x 7.7 (inches)

43UF6430

(43UF6430-UB)

49UF6800

(49UF6800-UA)

55UF6430

(55UF6430-UB)

55UF6790

(55UF6790-UB)

55UH6230

(55UH6230-UB)

49UF6900

(49UF6900-UC)

MODELS

Dimensions (W x H x D)

Weight

Power requirement Current Value / Power consumption 1.7 A / 170 W 2.2 A / 220 W

With stand

Without stand

With stand Without stand

60UF7300

(60UF7300-UT)

1,348 x 844 x 258 (mm) 1,572 x 971 x 279 (mm)

53.0 x 33.2 x 10.1 (inches) 61.8 x 38.2 x 10.9 (inches) 1,348 x 782 x 58.5 (mm) 1,572 x 909 x 59.7 (mm)

53.0 x 30.7 x 2.3 (inches) 61.8 x 35.7 x 2.3 (inches)

23.8 kg (52.4 lbs) 30.1 kg (66.3 lbs)

23.3 kg (51.3 lbs) 28.7 kg (63.2 lbs)

AC 100-240 V ~ 50/60 Hz AC 120 V ~ 50/60 Hz

70UF7300

(70UF7300-UT)

ENGLISH

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service.

MODEL SERIAL

OWNER’S MANUAL

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

KEY CODES

ENGLISH

ENG

KEY CODES

• This feature is not available for all models.

Code

(Hexa)

00 CH +, PR + R/C Button 53 List R/C Button

01 CH -, PR - R/C Button 5B Exit R/C Button

02 Volume + R/C Button 60 PIP(AD) R/C Button

03 Volume - R/C Button 61 Blue R/C Button

06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button

07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button

08 Power R/C Button 72 Red R/C Button

09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button

0B Input R/C Button 91 AD (Audio Description) R/C Button

0E SLEEP R/C Button 7A User Guide R/C Button

0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button

10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button

1A Q.View / Flashback R/C Button 8E ►► (Forward) R/C Button

Function Note

Code

(Hexa)

Function Note

1E FAV (Favorite Channel) R/C Button 8F ◄◄ (Rewind) R/C Button

20 Text (Teletext) R/C Button AA Info R/C Button

21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button

28 Return (BACK) R/C Button B0 ► (Play) R/C Button

30 AV (Audio / Video) Mode R/C Button B1

39 Caption/Subtitle R/C Button BA

40 Λ

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 99 AutoConfig R/C Button

44 OK / Enter R/C Button 9F App / * R/C Button

45 Q.Menu R/C Button

4C List, - (ATSC Only) R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

(Arrow Key / Cursor Up)

V (Arrow Key / Cursor

Down)

R/C Button BB Soccer R/C Button

R/C Button BD

ꕗ (Stop / File List)

ꕘ (Freeze / Slow Play /

Pause)

ꔄ (REC)

R/C Button

EXTERNAL CONTROL DEVICE SETUP

USB IN

(TV)

(PC)

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity. * Cable is not provided.

USB to Serial converter with USB Cable

USB Type

(PC)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter

which is not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

USB IN

RS-232C With RS232C Cable

DE9 (D-Sub 9pin) Type

• You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required

for the connection between the PC and the TV, which is specified in the manual.

(TV)

ENGENGLISH

(PC)

The connection interface may differ from your TV.

RS-232C IN

(CONTROL & SERVICE)

(TV)

EXTERNAL CONTROL DEVICE SETUP

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC

USB IN

(TV)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC)

(PC

SERVICE ONLY

ENGLISH

ENG

Phone jack Type

• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and

the TV, which is specified in the manual.

* For other models, connect to the USB port. * The connection interface may differ from your TV.

(TV)

- or

)

SERVICE ONLY

)

RS-232C IN

(CONTROL & SERVICE)

Customer Computer RS-232C configurations

3-Wire Configurations(Not standard)

RS-232C

(Serial port)

Set ID

For Set ID number, see "Real Data Mapping" on p.6

RXD 2 2 TXD

TXD 3 1 RXD

GND 5 3 GND

RXD 3 2 TXD

TXD 2 1 RXD

GND 5 3 GND

PC TV

D-Sub 9 Phone

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

* (Depending on model)

+ 44 hidden pages