LG Electronics 55SH7DB, 49SH7DB, 42SH7DB User Manual

OWNER’S MANUAL

LG Digital
Signage

(MONITOR SIGNAGE)

Please read this manual carefully before operating your set and retain it for

future reference.

42SH7DB
49SH7DB
55SH7DB

www.lg.com

2

ENGLISH

TABLE OF CONTENTS

3 LICENSES

4 ASSEMBLY AND PREPARATION

4 Optional Accessories

6 Parts and Buttons

6 Connecting the Stand

7 Connecting the Speakers

7 Connecting IR & Light Sensor

8 Portrait Layout

9 Attaching and Removing the LG Logo

Bracket

10 Installing on a Wall

12 REMOTE CONTROL

14 Displaying the Device Name

Connected to an Input Port

14 White Balance Adjust Menu

15 MAKING CONNECTIONS

15 Connecting to a PC

15 External Device Connection

17 Daisy Chain Monitors

18 TROUBLESHOOTING

21 PRODUCT SPECIFICATIONS

3

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX®
video. To play purchased DivX movies, first register your device at vod.divx.com.
Find your registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified®and associated logos are trademarks of DivX, LLC and are
used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.

Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

ENGLISH

NOTE

• The warranty will not cover any damage caused by using the product in an excessively dusty environment.

4

ENGLISH

ASSEMBLY AND PREPARATION

CAUTION

• Always use genuine components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of counterfeit components.

NOTE

• The accessories provided with your product may vary depending on the model or region.

• Product specifications or contents in this manual may be changed without prior notice due to upgrade of

product functions.

• SuperSign Software & Manual

- Downloading from the LG Electronics website.

- Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for

your model.

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.

Speakers

SP-2100

Stand

ST-200T

Cable Holders/

Cable Ties

Stand kit

Pitch 0.7 mm x Length 8 mm

(including spring washer)

Speaker kit

Screws

Diameter 4.0 mm x Pitch 0.7 mm x

Length 10 mm (including spring washer)

Screws

Diameter 4.0 mm x

Diameter 4.0 mm x

Pitch 1.6 mm x
Length 10 mm

Screws

5

ENGLISH

KT-OPSA

Power Cord

AN-WF500

Wi-Fi Dongle kit

Screws

Card (Easy Setup Guide)

OPS kit

Connecting

Cable

KT-SP0

Pixel sensor kit

NOTE

• Cable holder/Cable tie may not be available in some areas or for some models.

• Optional accessories are available for some models. If necessary, please purchase them separately.

• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.

6

ENGLISH

Parts and Buttons

Connecting the Stand

- The image may be different according to the
model

Buttons

Changes the input source.

y

:

Accesses the main menus, or saves your

y

:

input and exits the menus.
Adjust the up and down.

y

:

Moves left and right.

y

:

y

y/I:

Displays the current signal and mode.

:

Turns the power on or off.

- For certain models only.

- The image may be different according to the
model

1

2

7

Connecting the Speakers

- For certain models only.

- The image may be different according to the
model.

1 Connect an input signal cable before installing

the speakers.

2 Mount the speakers by using screws as

shown below. Make sure the power cable is
disconnected before making a connection.

NOTE

• Please turn off the power before removing the

cable. Connecting or removing the speaker
cable while turned on may result in no sound.

Connecting IR & Light Sensor

When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR & light sensor is magnetic. Attach
it to the front edge of the product for use.

[Front]

ENGLISH

3 Connect the speaker cables noting the correct

polarity. Use cable holders and cable ties to

organize the speaker cables.

CAUTION CAUTION

NOTE

• The signal strength of the IR and Light sensor

will decrease if the sensor is not placed in front
of the product.

8

ENGLISH

Portrait Layout

When installing in a portrait layout, rotate the
monitor counterclockwise 90 degrees (when facing
the screen).

Using Kensington Lock

(This is not available for all models.)

The Kensington security system connector is
located at the back of the monitor. For more
information on installation and use of this system,
refer to the manual provided with the Kensington
security system or visit

com

.

Connect the Kensington security system cable
between the monitor and a table.

http://www.kensington.

NOTE

• The Kensington security system is optional. You

can obtain additional accessories from most
electronics retail stores.

9

Attaching and Removing the LG Logo Bracket

- For certain models only.

- The image may be different according to the model.

Removing the LG Logo

1 Lay a clean cloth on the floor, and then put

the monitor on it with the screen face down.

Remove the two screws that secure the LG

Logo Bracket to the bottom of the rear side of

the monitor using a screwdriver.

LG Logo Bracket

Attaching the LG Logo on the right side

1 Lay a clean cloth on the floor, and then put

the monitor on it with the screen face down.

Remove the two screws that secure the LG

Logo Bracket to the bottom of the rear side of

the monitor using a screwdriver.

ENGLISH

2 After removing the screws, remove the LG

Logo. When re-attaching the LG Logo, follow
the process in reverse order.

2 After removing the screws, remove the LG

Logo. Attach the LG Logo Bracket with the two

screws, aligning it with the holes at the right

side.

10

ENGLISH

Installing on a Wall

For proper ventilation, allow a clearance of 100
mm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.

100 mm

100 mm

100 mm

100 mm

100 mm

To install your monitor on a wall, attach a wall
mounting bracket (optional part) to the back of the
monitor.

Make sure that the wall mounting bracket is
securely fixed to the monitor and to the wall.

1 Use only screws and wall mounting brackets

that conform to VESA standards.

2 Screws which are longer than standard length

may damage the inside of the monitor.

3 A non-VESA standard screw may damage

the product and cause the monitor to fall. LG
Electronics is not liable for any accidents related
to the use of non-standard screws.

4 Please use VESA standard as below.

• 785 mm and above

* Fixing screws: Diameter 6.0 mm x Pitch

1.0 mm x Length 12 mm

785 mm

CAUTION

• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.

• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall

mount and contact your local dealer or qualified personnel to assist with the installation.

• Do not over tighten the screws as this may damage the monitor and void your warranty.

• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by

misuse or use of improper accessories are not covered by the warranty.

• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation

instructions. (This pertains only to Australia and New Zealand.)

NOTE

• The wall mount kit includes the installation guide and all necessary parts.

• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.

• The length of screws required may differ depending on the wall mount. Be sure to use the correct length.

• For more information, please refer to the guide provided with the wall mount.

11

Securing the monitor to a wall (optional)

(Procedure may differ depending on the model.)

1 Insert and tighten the eyebolts, or brackets and

bolts on the back of the monitor.

- If there are already bolts inserted in the

eyebolts’ position, remove the other bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and
the eyebolts on the rear of the monitor.

3 Connect the eyebolts and wall brackets tightly

with a sturdy cord.
Make sure the securing cord is horizontal with
the flat surface.

WARNING

• If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries,

particularly to children, can be avoided by taking simple precautions such as:

» Using cabinets or stands recommended by the manufacturer.
» Only using furniture that can safely support the monitor.
» Ensuring the monitor is not overhanging the edge of the supporting furniture.
» Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both

the furniture and the monitor to a suitable support.

» Not placing cloth or other materials between the monitor and supporting furniture.
» Educating children about the dangers of climbing on furniture to reach the monitor or its controls.

ENGLISH

CAUTION

• Make sure that children do not climb on or hang from the monitor.

NOTE

• Use a platform or cabinet that is large and strong enough to support the monitor securely.

• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail

store.

• The illustration shows a general example of installation and may look different from the actual product.

12

ENGLISH

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual
carefully to use the monitor correctly.

To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the
labels inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.

CAUTION

• Do not mix old and new batteries, as this may

damage the remote control.

• Be sure to point the remote control toward the

remote control sensor on the monitor.

(POWER) Turns the monitor on or off.

MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING( ) Adjusts the brightness of the picture to reduce

INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)

energy consumption.

1/a/A Toggles between numerical and alphabet ical.

(Depending upon the model, this feature may not be supported.)

Number and Alphabet buttons

Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)

CLEAR Deletes the entered numerical or alphabetical character.

(Depending upon the model, this feature may not be supported.)

Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image

instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.)

MUTE Mutes all sounds.
BRIGHTNESS Adjust the brightness by pressing the Up and Down

buttons on the remote control. In USB mode, the OSD
menu has the Page function to move to the next file list.
(Depending upon the model, this feature may not be
supported.)

PSM Selects the Picture Mode.
INFO Views the information of the currently program and the screen.
W.BAL Enters the White Balance menu.

SETTINGS Accesses the main menus or saves your input and exit menus.
S.MENU SuperSign menu key (Depending upon the model, this feature

may not be supported.)

Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Allows you to move back one step in the user interaction function.
EXIT Quit all OSD tasks and applications.

Allows you to control various multimedia devices to enjoy

multimedia simply by using the remote control through the
SimpLink menu. (Depending upon the model, this feature

may not be supported.)

TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID

number, you can control whichever monitor you
want in multi-display format.

USB Menu Control Buttons Controls media playback.

13

ENGLISH

14

ENGLISH

Displaying the Device Name Connected to an Input Port

Display which devices are connected to which
external input ports.

1 Access the Input list screen and press the red

(input label) button on the remote control.

2 You can assign an input label for every input

except USB.

NOTE

• External inputs supported : HDMI, DVI-D,

DISPLAYPORT, OPS,
RGB

• Labels available : PC, DTV

• The input labels are displayed on the Input Label

screen or at the top left of the screen when you
change the external input setting.

• For DTV/PC-compatible signals, such as

1080p 60 Hz, the screen settings may change
according to the input label. The Just Scan
option is available if a PC is connected as an
external device.

White Balance Adjust Menu

Press the W.BAL button on the remote control.

• R-Gain : Adjusts the level of red. The higher the

number, the redder the set. Decrease
the number if the screen looks too red.

• G-Gain : Adjusts the level of green. The higher

the number, the greener the set.
Decrease the number if the screen
looks too green.

• B-Gain : Adjusts the level of blue. The higher the

number, the bluer the set. Decrease the
number if the screen looks too blue.

• Backlight : Adjusts the brightness. The higher

the number, the brighter the set.
This works in the same way as the
backlight of the user menu.

• Reset : Resets the white balance value to the

factory settings.

15

MAKING CONNECTIONS

You can connect various external devices to your monitor. Change the input mode and select the external
device you want to connect.

For more information about external device connections, see the user manual provided with each device.

Connecting to a PC

Some of the cables are not provided.

This monitor supports the Plug & Play* feature.

* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device
configuration or user intervention when powering up.

External Device Connection

Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.

Some of the cables are not provided. For the best picture and sound quality, connecting external devices to
your monitor using HDMI cables is recommended.

ENGLISH

16

ENGLISH

NOTE

• For the best image quality, using the monitor with HDMI connection is recommended.

• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core,

such as a DVI cable.

• If you turn the monitor on when the set is cold, the screen may flicker. This is normal.

• Sometimes red, green, or blue spots may appear on the screen. This is normal.

• Use a High Speed HDMI®/TM cable.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may

not display or a connection error may occur.

• Recommended HDMI Cable Types

- High-Speed HDMI®/TM Cable

- High-Speed HDMI®/TM Cable with Ethernet

• If you cannot hear any sound in HDMI mode please check your PC settings. Some PCs require you to

manually change the default audio output to HDMI.

• If you want to use HDMI-PC mode, you must set your PC/DTV to PC mode.

• You may experience compatibility issues if you use HDMI-PC mode.

• Make sure the power cable is disconnected.

• If you connect a gaming device to the monitor, use the cable provided with the gaming device.

• It is recommended to use the speakers that are provided as optional accessories.

• High Speed HDMI®/TM cables transmit a HD signal up to 1080p and higher.

• Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different

signaling system)

• Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more

information.

CAUTION

• Connect the signal input cable and tighten it by turning the screws clockwise.

• Do not press the screen with your finger for a prolonged period as this may result in temporary distortion on

the screen.

• Avoid displaying static images on the screen for a long period of time to prevent image burn. Use a

screensaver if possible.

• A wireless communication device near your monitor can affect the image.

17

Daisy Chain Monitors

To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the
DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.

* DP Cable - Use a DP cable that is certified to DP1.1a (SST) or higher.

ENGLISH

Monitor 1 Monitor 2 Monitor 3 Monitor 4

NOTE

• If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via the DP

Out port (at the recommended resolution). If you want to connect more than this number of monitors, use
a booster.

• If you set the tile mode using DVI or HDMI, you will not be able to watch HDCP-encrypted content.

• If the signal cable between the product and your PC is too long, make sure to use the Booster or optical

cable.

18

ENGLISH

TROUBLESHOOTING

No image is displayed

Problem Action

Is the product power cord connected? y Check if the power cord is correctly plugged into the power

outlet.

Does the Out of range message
appear?

Does the “No Signal” message appear? y The signal cable between PC and product is not connected.

The Unknown Product message appears when the product is connected.

Problem Action

Did you install the driver? y Check if the Plug & Play function is supported by referring to the

y The signal from the PC (video card) is out of the vertical or

horizontal frequency range of the product. Adjust the frequency
range by referring to the Specifications in this manual.
* Maximum resolution: 1920 x 1080 (60 Hz)

Check the signal cable.

y Press the INPUT menu in the remote Control to check the input

signal.

video card user manual.

The screen image looks abnormal.

Problem Action

Is the screen position wrong? y Check if the video card resolution and frequency are supported

by the product. If the frequency is out of range, set to the
recommended resolution in the Control Panel Display Setting
menu.

The screen is displayed abnormally. y The proper input signal is not connected to the signal port.

Connect the signal cable that matches with the source input
signal.

After-image appears on the product.

Problem Action

After-image appears when the
product is turned off.

y If you use a fixed image for a long time, the pixels may be

damaged. Use the screen-saver function.

y When a dark image is displayed on the screen after an image

with high contrast (black and white or gray), this may cause
image sticking. This is normal for LCD screen products.

The audio function does not work.

Problem Action

No sound? y See if the audio cable is connected properly.

y Adjust the volume.
y See if the sound is set properly.

Sound is too dull. y Select the appropriate equalizer sound.

Sound is too low. y Adjust the volume.

Screen color is abnormal.

Problem Action

Screen has poor color resolution (16
colors).

Screen color is unstable or
mono-colored.

Do black spots appear on the screen? y Several pixels (red, green, white, or black color) may appear

y Set the number of colors to more than 24 bits (true color). Select

Control Panel - Display - Settings - Color Table menu in Windows.

y Check the connection status of the signal cable. Or, re-insert the

PC video card.

on the screen, which can be attributable to the unique
characteristics of the LCD panel. This is not a malfunction of the
LCD.

19

ENGLISH

The operation does not work normally.

Problem Action

The power suddenly turned off. y Is the Timer set?

y Check the power control settings. Power interrupted.

NOTE

• The software-related contents may be changed without prior notice due to upgrade of the product

functions.

20

ENGLISH

CAUTION

• Image sticking does not occur when using constantly changing images but may occur when using a fixed

image for an extended period of time. Therefore, it is recommended that you use the instructions below
to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that
you change the screen at least once every 12 hours at the very minimum; if done more frequently, the
prevention of image sticking is more effective.

Recommended operating conditions

Change the background and the character

1

colors using the same time interval.

ID: UPM 123
PW: ****

ID: UPM 123
PW: ****

Change the image using the same time

2

interval.

When changing colors, using complementary
colors helps to prevent image sticking.

Make sure that the characters or images before
changing the image remain in the same location
after changing the image.

Glass

BM BM BM

CF

ITO or MoTi Pixel Layer

OC

PI

LC

PI

TFT Layers

Glass

What is image sticking?

When the LCD panel displays a static image for an

CFCFCF

extended period of time, it can cause a voltage
difference between the electrodes that operate
the liquid crystals. When the voltage difference
between the electrodes builds up over time, liquid
crystals have a tendency to remain aligned in
one direction. During this process, a previously
displayed image remains visible. This phenomenon
is referred to as image sticking.

21

PRODUCT SPECIFICATIONS

The product specifications below may be changed without prior notice due to upgrade of product functions.

“ ” refers to alternating current (AC), and “ ” refers to direct current (DC).

LCD screen Screen type Thin Film Transistor (TFT)

Liquid Crystal Display (LCD) Screen

Video signal Maximum resolution 1920 x 1080 @ 60 Hz

- This may not be supported on some OS or graphic card
types.

Recommended
resolution

Horizontal frequency RGB : 30 kHz to 83 kHz

Vertical frequency RGB : 50 Hz to 75 Hz

Synchronization Separate Sync, Digital

Input/ Output ports SPEAKER OUT,AUDIO IN/OUT,LAN, PIXEL SENSOR, HDMI,

Embedded battery Applied

Environmental
Conditions

* Applicable only for models that support the speakers

Audio/AUDIO RMS Audio Output 10 W + 10 W (R + L)

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Input Sensitivity 0.7 Vrms

Speaker Impedance 8 Ω

1920 x 1080 @ 60 Hz

- This may not be supported on some OS or graphic card
types.

HDMI/OPS/DVI-D/DISPLAYPORT : 28,1 kHz to 83 kHz

HDMI/OPS/DVI-D/DISPLAYPORT : 50 Hz to 60 Hz

IR&LIGHT SENSOR, DP IN/OUT, DVI-D, USB, RGB,

RS-232C IN/OUT

0 °C to 40 °C

10 % to 80 %

-20 °C to 60 °C

5 % to 95 %

ENGLISH

22

ENGLISH

42SH7DB

LCD screen Pixel pitch 0.4833 mm (H) x 0.4833 mm (V)

Power Rated power AC 100-240 V~ 50/60 Hz 1.2 A

Power consumption On Mode: 110 W (Typ.)

Sleep Mode (DISPLAYPORT): ≤ 0.7 W

Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W

Off Mode: ≤ 0.5W

Dimensions (Width
x Height x Depth) /
Weight

49SH7DB

LCD screen Pixel pitch 0.55926 mm (H) x 0.55926 mm (V)

Power Rated power AC 100-240 V~ 50/60 Hz 1.6 A

Dimensions (Width
x Height x Depth) /
Weight

Head 948.7 mm x 555.3 mm x 31.7 mm / 12.5 kg

Head + Stand 948.7 mm x 617.7 mm x 298.3 mm / 13.9 kg

Head + Speaker 948.7 mm x 555.3 mm x 81.3 mm / 13.3 kg

Head + Speaker + Stand 948.7 mm x 617.7 mm x 298.3 mm / 14.7 kg

Power consumption On Mode: 125 W (Typ.)

Sleep Mode (DISPLAYPORT): ≤ 0.7 W

Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W

Off Mode: ≤ 0.5 W

Head 1094.6 mm x 637.4 mm x 31.7 mm / 15.6 kg

Head + Stand 1094.6 mm x 699.7 mm x 298.3 mm / 17.0 kg

Head + Speaker 1094.6 mm x 637.4 mm x 81.3 mm / 16.4 kg

Head + Speaker + Stand 1094.6 mm x 699.7 mm x 298.3 mm / 17.8 kg

23

55SH7DB

LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V)

Power Rated power AC 100-240 V~ 50/60 Hz 1.7 A

Power consumption On Mode: 140 W (Typ.)

Sleep Mode (DISPLAYPORT): ≤ 0.7 W

Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W

Off Mode: ≤ 0.5W

Dimensions (Width
x Height x Depth) /
Weight

Head 1230.4 mm x 713.7 mm x 31.7 mm / 20.7 kg

Head + Stand 1230.4 mm x 776.1 mm x 298.3 mm / 22.1 kg

Head + Speaker 1230.4 mm x 713.7 mm x 81.3 mm / 21.5 kg

Head + Speaker + Stand 1230.4 mm x 776.1 mm x 298.3 mm / 22.9 kg

ENGLISH

24

ENGLISH

RGB(PC) Support mode

Resolution

720 x 400 31.468 70.8

640 x 480 31.469 59.94

800 x 600 37.879 60.317

1024 x 768 48.363 60

1280 x 720 44.772 59.855

1280 x 960 60 60

1152 x 864 57.717 59.934

1280 x 1024 63.981 60.02

1920 x 1080 67.5 60

Horizontal
frequency (kHz)

HDMI / OPS/ DISPLAYPORT (DTV) Support

Mode

Resolution

480/60p 31.5 60

576/50p 31.25 50

720/50p 37.5 50

720/60p 45 60

1080/50i 28.1 50

1080/60i 33.75 60

1080/50p 56.25 50

1080/60p 67.5 60

Horizontal
frequency (kHz)

Vertical
frequency (Hz)

Vertical frequency
(Hz)

HDMI / OPS / DVI-D / DISPLAYPORT (PC)

Support Mode

Resolution

640 x 480 31.469 59.94

800 x 600 37.879 60.317

1024 x 768 48.363 60

1280 x 720 44.772 59.855

1366 x 768 47.7 60

1280 x 1024 63.981 60.02

1680 x 1050 65.290 59.954

1920 x 1080 67.5 60

Horizontal
frequency (kHz)

Vertical frequency
(Hz)

NOTE

• PC resolutions available for the Input

Label option in RGB/ HDMI/ OPS / DVI-D /
DISPLAYPORT input modes: 640 x 480/60 Hz,
1280 x 720/60 Hz, 1920 x 1080/60 Hz; 480p,
720p, and 1080p DTV resolutions.

• Vertical frequency: The product display

functions by the screen image changing dozens
of times every second like a fluorescent lamp.
The vertical frequency or refresh rate is the
number of image displays per second. The unit
is Hz.

• Horizontal frequency: The horizontal interval

is the time taken to display one horizontal line.
When 1 is divided by the horizontal interval,
the number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.

• DISPLAYPORT does not support YCbCr 4:2:2.

ENERGY STAR® is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency (EPA).

As an ENERGY STAR® Partner LGE U. S. A., Inc. has
determined that this product meets the ENERGY
STAR® guidelines for energy efficiency. Refer to
ENERGY STAR.gov for more information on the
ENERGY STAR® program.

Make sure to read the Safety Precautions
before using the product.
The model and serial numbers of the SET are
located on the back and one side of the SET.
Record it below should you ever need service.

WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.

MODEL

SERIAL

Temporary noise is normal when powering ON
or OFF this device.

USER GUIDE

LG Digital
Signage

(MONITOR SIGNAGE)

L15

Please read this manual carefully before operating your set and retain it for

future reference.

www.lg.com

2

ENGLISH

TABLE OF
CONTENTS

3 USING THE MONITOR

31 TO CONTROL MULTIPLE

PRODUCTS

3 Using the Input List

3 Adjusting Aspect Ratio

5 ENTERTAINMENT

5 Using the Network

5 - Connecting to a Network
7 - Network Status
7 Using the My Media

7 - Connecting USB storage devices
9 - Browsing Files
11 - Viewing Movies
14 - Viewing Photos
16 - Listening to Music
18 - Viewing the Contents List

19 CUSTOMIZING SETTINGS

19 Accessing Main Menus

20 - PICTURE Settings
23 - AUDIO Settings
24 - TIME Settings
25 - OPTION Settings
28 - NETWORK Settings

29 IR CODES

31 Connecting the Cable

32 RS-232C Configurations

32 - 4P Cable
32 - RS-232C Cable
32 Communication Parameter

33 Command Reference List

35 Transmission / Receiving Protocol

To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to [e-mail].
This offer is valid for three (3) years from the
date on which you purchased the product.

3

USING THE MONITOR

Using the Input List

Press INPUT to access the Input List.

1

Press the navigation buttons to scroll to one of the input mode and press OK.

2

yRGB-PC

yHDMI

yDVI-D

yUSB
yDisplay Port
yOPS

Adjusting Aspect Ratio

Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.

Aspect Ratio

16:9

Just Scan x o x o x o x o x

Set By Program x o x o x o x o x

4:3 o o o o o o o o o

Zoom x o x o x o x o x

Cinema Zoom1 x o x o x o x o x

MODE

RGB HDMI DVI-D Display Port OPS

PC DTV PC DT V PC DTV PC DTV PC

o o o o o o o o o

ENGLISH

NOTE

• You can also change the image size by accessing the main menus.

• The Just Scan mode operates when a video signal has resolution of 720p or higher.

CAUTION

• If a fixed image displays on the screen for a long period of time, it will be imprinted and become a

permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

• If you don't use your monitor, turn the power off or set a screen saver program from the PC or the system to

prevent image retention.

• If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the

screen.

4

y16:9 : This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire

ENGLISH

screen (useful for viewing 4:3 formatted DVDs).

yJust Scan : This Selection will allow you view the picture of best quality without loss of original picture

in high resolution image. Note: If there is noise in original Picture, You can see the noise at the

edge.

ySet By Program : Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9.

y4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear

on both the left and right of the screen.

yZoom : This selection will allow you to view the picture without any alteration, while filling the entire

screen. However, the top and bottom of the picture will be cropped.

yCinema Zoom1 : Choose Cinema Zoom when you want to enlarge the picture in correct proportion.

Note: When enlarging or reducing the picture, the image may become distorted.

5

NW

@

ENTERTAINMENT

Using the Network

Connecting to a Network

For wired network connections, connect the
display to a local area network (LAN) via the LAN
port as shown on the following diagram. Then, set
up the network settings. For wireless network con­nections, connect the Wi-Fi USB module to the USB
port. Then, set up the network settings.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-

vider or router manual.

LAN

LA

Router

AN

To set up the network settings: (Even if your display
has already connected automatically, running
setup again will not harm anything),

Connecting to a wired network

1 Press SETTINGS to access the main menus.

2 Press the navigation buttons to scroll to NET-

WORK and press OK.

3 Press the navigation buttons to select Net-

work Setting and press OK.

4 If you already set network setting, select

Resetting. The new connection settings resets

the current network settings.

5 Select IP Auto Setting or IP Manual Setting.

- IP Manual Setting

press the navigation and number buttons. IP

addresses will need to be input manually.

- IP Auto Setting

Select this if there is a DHCP server (Router)

on the local area network (LAN) via wired

connection, the display will automatically

be allocated an IP address. If you’re using a

broadband router or broadband modem that

has a DHCP (Dynamic Host Configuration

Protocol) server function. The IP address will

automatically be determined.

ENGLISH

Internet

Internet

CAUTION

• Do not connect a modular phone cable to the

LAN port.

• Since there are various connection methods,

please follow the specifications of your
telecommunication carrier or internet service
provider.

Cable modem

6 When you are finished, press EXIT.

ETHERNET

6

Connecting to a wireless network

ENGLISH

1 Press SETTINGS to access the main menus.

2 Press the navigation buttons to scroll to NET-

WORK and press OK.

3 Press the navigation buttons to select Net-

work Setting and press OK.

4 Select Setting from the AP list or Simple

setting (WPS-button mode).

-Setting from the AP list
Select an AP to connect to a wireless network.

- Simple setting (WPS-button mode)
Press the button on the wireless router that
supports PBC to easily connect to the router.

5 When you are finished, press EXIT.

CAUTION

• Network setting menu will not be available until

the display connected to physical network.

• Since there are various connection methods,

please follow the specifications of your
telecommunication carrier or internet service
provider.

NOTE

• If you want to access the Internet directly on

your display, the Internet connection should
always be on.

• If you cannot access the Internet, check the

network conditions from a PC on your network.

• When you use Network Setting, check the LAN

cable or check if DHCP in the router is turned on.

• If you do not complete the network settings, the

network may not work properly.

Tips for Network setting

y Use a standard LAN cable with this display. Cat5 or

better with a RJ45 connector.

y Many network connection problems during set

up can often be fixed by re-setting the router or
modem. After connecting the display to the home
network, quickly power off and/or disconnect the
power cable of the home network router or cable
modem. Then power on and/or connect the power
cable again.

y Depending on the internet service provider (ISP),

the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.

y LG is not responsible for any malfunction of the

display and/or the internet connection feature due
to communication errors/malfunctions associated
with your internet connection, or other connected
equipment.

y LG is not responsible for problems within your

internet connection.

y You may experience undesired results if the net-

work connection speed does not meet the require­ments of the content being accessed.

y Some internet connection operations may not be

possible due to certain restrictions set by the Inter­net service provider (ISP) supplying your Internet
connection.

y Any fees charged by an ISP including, without limi-

tation, connection charges are your respon- sibility.

y A 10 Base-T or 100 Base-TX LAN port is required

when using a wired connection to this display. If
your internet service does not allow for such a con­nection, you will not be able to connect the display.

y A DSL modem is required to use DSL service and

a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the Internet connection feature con­tained in this display or you may be limited to the
number of devices you can connect at the same
time. (If your ISP limits subscription to one device,
this display may not be allowed to connect when a
PC is already connected.)

y The use of a router may not be allowed or its usage

may be limited depending on the policies and
restrictions of your ISP. For details, contact your ISP
directly.

7

Tips for Wireless Network Setting

y Wireless networks can be subject to interfer-

ence from other devices operating at a fre­quency of 2.4 GHz (wireless phones, Bluetooth
devices, or microwave ovens). There may also
be interference from devices with a frequency
of 5 GHz, same as other Wi-Fi devices.

y The surrounding wireless environment can

cause the wireless network service to run
slowly.

y For an AP connection, an access point device

that supports wireless connection is required
and the wireless connection feature must be
enabled on the device. Contact your service
provider regarding availability of wireless con­nection on your access point.

y Check the SSID and security settings of the AP

for AP connection. Refer to the appropriate
documentation for SSID and security settings
of the AP.

y Invalid settings on network devices (wired/

wireless line sharer, hub) can cause the
monitor to run slowly or not operate properly.
Install the devices correctly according to the
appropriate manual and set the network.

y Connection method may differ according to

the AP manufacturer.

Network Status

Using the My Media

Connecting USB storage devices

Connect USB storage devices such as a USB flash
memory, external hard drive to the display and use
multimedia features.
Connect a USB flash memory or USB memory card
reader to the Display as shown on the following
illustration. The My Media screen appears.

or

ENGLISH

1 Press SETTINGS to access the main menus.

2 Press the navigation buttons to scroll to

NETWORK and press OK.

3 Press the navigation buttons to select

Network Status.

4 Press OK to check the network status.

5 When you are finished, press EXIT.

Option Description

Setting Return to the network setting menu.

Test

Close Return to the previous menu.

Test the current network status after

setting the network.

CAUTION

• Do not turn the display off or remove a USB

storage device while MY MEDIA menu is
activated, as this could result in loss of files or
damage to the USB storage device.

• Back up your files saved on a USB storage device

frequently, as you may lose or damage the files
and this may be not covered by the warranty.

8

Tips for using USB storage devices

ENGLISH

y Only a USB storage device is recognizable.
y If the USB storage device is connected through

a USB hub, the device is not recognizable.

y A USB storage device using an automatic rec-

ognition program may not be recognized.

y A USB storage device which uses its own driver

will not be recognized.

y The recognition speed of a USB storage device

may depend on each device.

y Please do not turn off the display or unplug

the USB device when the connected USB stor­age device is working. When such a device is
suddenly separated or unplugged, the stored
files or the USB storage device may be dam­aged.

y Please do not connect the USB storage device

which was artificially maneuvered on the PC.
The device may cause the product to malfunc­tion. Only use a USB storage device which has
normal music files, image files
or movie files.

y Please only use USB storage devices formatted

using the FAT32 file system. Storage devices
formatted with utility programs that are not
supported by Windows may not be recog­nized.

y Please connect power to a USB storage device

(over 0.5 A) which requires an external power
supply. If not, the device may not be recog­nized.

y Please connect a USB storage device with the

cable included by the device maker.

y Some USB storage devices may not be sup-

ported or operate smoothly.

y File alignment method of USB storage devices

is similar to Window XP and the monitor can
recognize up to 100 English characters.

y Be sure to back up important files since data

stored on a USB memory device may be dam­aged. We will not be responsible for any data
loss.

y If the USB HDD does not have an external

power source, the USB device may not be
detected. So be sure to connect the external
power source.

- Please use a power adaptor for an external
power source.

y If your USB memory device has multiple parti-

tions, or if you use a USB multi-card reader,
you can use up to 4 partitions or USB memory
devices.

y If a USB memory device is connected to a USB

multi-card reader, its volume data may not be
detected.

y If the USB memory device does not work prop-

erly, disconnect and reconnect it.

y How fast a USB memory device is detected

differs from device to device.

y If the USB is connected in Standby Mode, that

drive will automatically be loaded when the
display is turned on.

y The recommended capacity is 1 TB or less for

a USB external hard disk and 32 GB or less for
USB memory.

y Any device with more than the recommended

capacity may not work properly.

y If a USB external hard disk with a Energy Sav-

ing function does not work, turn the hard disk
off and on again to make it work properly.

y USB storage devices below USB 2.0 are sup-

ported as well. But they may not work properly
with videos.

y A maximum of 999 folders or files can be

recognized under one folder.

y It is recommended you use a certified USB

storage device and cable. Otherwise, a USB
storage device may not be detected or a play­back error may occur.

y Only a USB memory device can be used to play

back the files distributed and stored by Super­Sign Manager. A USB hard disk or multi-card
reader will not work.

y Only an FAT 32 file formatted storage device

can play back the files distributed and stored
by SuperSign manager.

y A USB 3.0 storage device may not work.
y Data on some USB storage devices may be

damaged in a high temperature environment.

y It is recommended that you avoid playing

contents using more than two USB ports
simultaneously.

9

Browsing Files

Browse files saved in a USB storage device.

Press SETTINGS to access the main menu.

1

Press the search button to scroll to MY MEDIA and press OK.

2

Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and

3

press OK.

Supported file format

Typ e Supported file format

Movie Codec Media Container Profile

Video MPEG1 / MPEG2 DAT, MPG, MPEG, TS, TP 1080P @ 30 fps

MPEG4

(DivX 3.11, DivX 4,

DivX 5, DivX 6,

Xvid 1.01, Xvid 1.02, Xvid

1.03, Xvid 1.10-beta1/2)

H.264 AVI, MP4, MKV, TS, TRP, TP1080P @ 60 fps

Audio MP3 MP3 8 kbps to 320 kbps (Bit rate)

AC3 AC3 32 kbps to 640 kbps (Bit rate)

MPEG MP3 32 kbps to 448 kbps (Bit rate)

AAC, HEAAC MP4 8 kHz to 48 kHz (Sample rate)

LPCM AVI, WAV 64 kbps to 1.5 Mbps (Bit rate)

Bit rate : within 8 kbps to 320 kbps(MP3)

External Subtitle format : *.smi/*.srt/*.sub(MicroDVD, Subviewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.

psb(PowerDivX)

Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files)

AVI, DIVX, MP4, MKV, TS,

TRP

1080P @ 30 fps

16 kHz to 48 kHz (Sample rate)

32 kHz, 44.1 kHz, 48 kHz

(Sample rate)

16 kHz to 48 kHz (Sample rate)

8 kHz to 48 kHz (Sample rate)

ENGLISH

10

ENGLISH

Photo JPEG

Music MP3

Content

(when using

SuperSign

Manager)

Typ e Supported file format

Baseline : 64 x 64 to 15360 x 8640

Progressive : 1920 x 1440

PNG

Interlace : 1200 x 800

BMP

9600 x 6400

y Non-supported files are displayed in the form of predefined icon.

Bit rate : 8 kbps to 320 kbps

y Sampling rate MPEG1/2 Layer3 : 16 kHz to 48 kHz

File Extensions : *.cts/ *.cse

Movie

File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.trp/*.tp/*.mp4/*.mkv/*.avi/*. avi(motion JPEG)/*.mp4(motion

JPEG)/*.mkv(motion JPEG)

Video format: MPEG1, MPEG2, MPEG4,H.264, DivX 3.11, DivX 4, DivX 5, DivX 6,

Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid 1.10-beta1/2, JPEG

Audio format: MP3, Dolby Digital, LPCM, AAC, HE-AAC

11

Viewing Movies

Plays movie files saved in the USB storage device.

Press SETTINGS to access the main menu.

1

Press the navigation button to scroll to MY MEDIA and press OK.

2

Press the navigation button to scroll to Movie List and press OK.

3

Press the navigation buttons to scroll to a folder you want and press OK.

4

Press the navigation buttons to scroll to a file you want and press OK.

5

y Change Device : Selects the USB storage device. (Depending on model)
y Go to root folder : Returns to the home screen of My Media.
y Go to upper folder : Returns to the previous screen.
y Exit : Exits My Media.

6 During movie playback, press OK to access the following settings.

Remote

button

Stops the playback.

Plays a video.

Pauses or resumes the playback.

Scans backward in a file.

Scans forward in a file.

Adjusts the screen brightness to save energy.

SETTINGS Show the Option menu.

Hide the menu on the full-sized screen.

BACK

EXIT Returns to Movie List.

or

Skips to specific points in a file during playback. The time of a specific point will appear on
the status bar. In some files, this function may not work properly.

Description

ENGLISH

12

Tips for using playing video files

ENGLISH

y Some user-created subtitles may not work properly.
y Some special characters are not supported in subtitles.
y HTML tags are not supported in subtitles.
y Subtitles in languages other than the supported languages are not available.
y The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio

language is changed.

y A damaged movie file may not be played correctly, or some player functions may not be usable.
y Movie files produced with some encoders may not be played correctly.
y If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
y HD videos with a maximum of 1920 X 1080 @ 25/30P or 1280 X 720 @ 50/60P are supported, depending

on the frame.

y Videos with resolutions higher than 1920 X 1080 @ 25/30P or 1280 X 720 @ 50/60P may not work prop-

erly depending on the frame.

y Movie files other than the specified types and formats may not work properly.
y Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps)
y We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC.
y DTS Audio codec is not supported.
y A movie file more than 30 GB in file size is not supported for playback.
y A DivX movie file and its subtitle file must be located in the same folder.
y A video file name and its subtitle file name must be identical for it to be displayed.
y Playing a video via a USB connection that doesn’t support high speed may not work properly.
y Files encoded with GMC(Global Motion Compensation) may not be played.

Video options

1 Press SETTINGS to access the Pop-Up menus.

2 Press the navigation buttons to scroll to Set Video Play, Set Video, or Set Audio, and press OK.

NOTE

y The option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not

affected by option values changed in Photo List or Music List.

y The option values changed in Photo List and Music List do affect each other.

y When replaying the video file after stopping, you can play from where it stopped previously.

13

Select Set Video Play to access the following menus:

Menu Description

Picture Size Selects your desired picture format during movie play.

Audio

Language

Subtitle
Language

Language Activated for SMI subtitle and can select the language within the subtitle.

Code Page Can select the font for subtitle.

Sync Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of

Position Changes the position of the subtitle either up or down during movie play.

Size Selects your desired Subtitle size during movie play.

Repeat Turn on/off repeat function of movie playback. When turned on, the file within the

Changes the Language Group of the audio during movie play. Files with a single audio
track cannot be selected.

Turn on/off the subtitle.

When set to default, same font as general menu will be used.

0.5 secs during movie play.

folder will be played back repeatedly. Even when the repeated playback is turned off, it
can run the playback if the file name is similar to the previous file.

ENGLISH

NOTE

y Only 10,000 of sync blocks can be supported within the subtitle file.
y When playing a video, you can adjust the picture size by pressing the ARC button.
y Subtitles in your language are only supported when the OSD menu is also in this language.
y The code page options may be disabled depending on the language of the subtitle files.
y Select the appropriate code page for the subtitle files.

14

ENGLISH

Viewing Photos

View image files saved in the USB storage device.

Press SETTINGS to access the main menu.

1

Press the navigation button to scroll to MY MEDIA and press OK.

2

Press the navigation button to scroll to Photo List and press OK.

3

Press the navigation buttons to scroll to a folder you want and press OK.

4

Press the navigation buttons to scroll to a file you want and press OK.

5

y Change Device : Selects the USB storage device. (Depending on model)
y Go to root folder : Returns to the home screen of My Media.
y Go to upper folder : Returns to the previous screen.
y Exit : Exits My Media.

While viewing photos, you can access the following settings.

6

Menu Description

Slideshow Starts or stops a slideshow with selected photos. If there are no selected photos, all photos

saved in the current folder display during a slideshow. To set a slideshow speed, select Op­tion.

BGM Turns the background music on or off. To set the background music folder, select Option.

You can adjust option by SETTINGS button on the remote control.

Rotates photos clockwise (90 °, 180 °, 270 °, 360 °).

NOTE

y The supported photo size is limited. You cannot rotate a photo if the resolution of the rotated

width is larger than the supported resolution size.

Enlarges the photo by 100 %, 200 % or 400 %.

Adjusts the brightness of the screen for energy saving.

Option To display the OPTIONs.

Hide Hides the option window.

Exit Return to Photo List.

15

Photo options

1 Press SETTINGS to show the Option menus.

2 Press the navigation buttons to scroll to Set Photo View, Set Video, or Set Audio, and press OK.

NOTE

y The option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not

affected by option values changed in Photo List or Music List.

y The option values changed in Photo List and Music List do affect each other.

Select Setting Photo View to access the following menus:

Menu Description

Slide Speed Select a slideshow speed.

(Options: Fast, Medium, or Slow.)

BGM Selects a music folder for the background music.

Repeat Plays background music on repeat.

Random Plays background music in random order.

ENGLISH

16

ENGLISH

Listening to Music

Plays music files saved in the USB storage device.

Press SETTINGS to access the main menu.

1

Press the navigation button to scroll to MY MEDIA and press OK.

2

Press the navigation button to scroll to Music List and press OK.

3

Press the navigation buttons to scroll to a folder you want and press OK.

4

Press the navigation buttons to scroll to a file you want and press OK.

5

y Change Device : Selects the USB storage device. (Depending on model)
y Go to root folder : Returns to the home screen of My Media.
y Open Music Player : Opens the settings window for music. This feature is activated only during playback.
y Go to upper folder : Returns to the previous screen.
y Exit : Exits My Media.

6 During music playback, press OK to access the following settings.

Remote

button

Stops playing back the file and moves back to the Music List.

Plays a music file.

Pauses or resumes playback.

Skips to the previous file.

Skips to the next file.

Adjusts the brightness of the screen for energy saving (Off and Screen Off work only.)

SETTINGS Show the Option menu.

Hides the option window.

BACK

EXIT Return to Music List.

or

Skips to specific points in a file during playback. The time of a specific point will appear on
the status bar. In some files, this function may not work properly.

Description

17

Tips for playing music files

y This unit cannot support the ID3 Tag embedded MP3 files.

NOTE

y A damaged or corrupted music file does not play but displays 00:00 in playtime.
y A music downloaded from a paid service with copyright protection does not start but displays inappropriate informa-

tion in playtime.

y If you press OK, buttons, screen saver is stopped.
y The , , , , buttons on the remote control are also available in this mode.
y You can use the button to select the next music and the button to select the previous music.

file name

002. B02.mp3
00:31 / 04:04

Time elapsed/ Duration

Music options

1 Press SETTINGS to access the pop-up menus.

2 Press the navigation buttons to scroll to Set Audio Play or Set Audio and press OK.

NOTE

y The option values changed in Movie List do not affect Photo List or Music List.Therefore, they are not

affected by option values changed in Photo List or Music List.

y The option values changed in Photo List and Music List do affect each other.

ENGLISH

When you select the Set Audio Play,

Menu Description

Repeat Repeats the music playback.

Random Plays random music tracks.

18

ENGLISH

Viewing the Contents List

Plays back the stored files using the Export option in SuperSign Manager.

Press SETTINGS to access the main menu.

1

Press the navigation button to scroll to MY MEDIA and press OK.

2

Press the navigation button to scroll to Contents List and press OK.

3

Press the navigation buttons to scroll to a folder you want and press OK.

4

Press the navigation buttons to scroll to a file you want and press OK.

5

y Change Device : Selects the USB storage device. (Depending on model)
y Go to root folder : Returns to the home screen of My Media.
y Go to upper folder : Returns to the previous screen.
y Exit : Exits My Media.

NOTE

y While playing media files from Contents List, only the BACK, EXIT, or volume button are available.

Selecting the BACK or EXIT button stops playing media files and returns to the Contents List.

y When you use the distribution feature which utilizes SuperSign Software, the storage device used to

store contents is determined based on the size of the remaining memory space. (Note: If USB ports 1
and 2 have the same memory space, contents will be saved on the storage device connected to USB
port 1.

(Depending on model)

y If there is the AutoPlay folder in the USB device and its files are in supported formats, they can be played

back automatically when the USB device is connected to the monitor.

y It is recommended that you avoid playing contents using more than two USB ports simultaneously.
y With respect to the playback of distribution or contents schedules through SuperSign Software, the

schedule executed last time is played.

)

19

CUSTOMIZING SETTINGS

Accessing Main Menus

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to one of the following menus and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

When you are finished, press EXIT. When you return to the previous menu, press BACK.

4

y PICTURE : Adjusts the image size, quality, or effect.
y AUDIO : Adjusts the sound quality, effect, or volume level.
y TIME : Sets the time, date, or timer feature.
y OPTION : Customizes the general settings.
y NETWORK : Sets up the network setting.
y MY MEDIA : Display and play movie, photo and music contents stored on your USB or signage device

(Internal storage device).

ENGLISH

20

ENGLISH

PICTURE Settings

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to PICTURE and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

- To return to the previous level, press BACK.

When you are finished, press EXIT.

4

When you return to the previous menu, press BACK.

The available picture settings are described in the following:

Setting Description

Energy

Saving

Smart Energy
Saving

Picture Mode Selects the picture mode optimized for the viewing environment or the programme.

Aspect Ratio Changes the image size to view images at its optimal size.

Reduces power consumption by adjusting peak screen brightness.

Level

Off Disables Energy Saving function.

Minimum/
Medium/
Maximum

Screen Off The screen turns off in 3 seconds.

Adjusts the backlight and contrast depending on the screen brightness.

Level

Off Disables the Smart Energy Saving function.

On Enables the Smart Energy Saving function to save power

Mode

Vivid Heightens contrast, brightness, and sharpness to display vivid

Standard Displays images in standard levels of contrast, brightness, and

APS APS ( Auto power saving ) mode reduces power consumption by

Cinema Optimizes the video image for a cinematic look to enjoy movies as if

Sport Optimizes the video image for high and dynamic actions by

Game Optimizes the video image for a fast gaming screen such as PCs or

Calibration Applies user-customized white balance based on Standard.

Expert1·2 Menu for adjusting picture quality that allows experts and amateurs

Selects the brightness level of the backlight.

consumption as much as the value set in the smart energy saving
rate.

images.

sharpness.

dimming control.

you are in a movie theater.

emphasizing primary Colors such as white, grass, or sky blue.

games.

to enjoy the best Monitor viewing.

21

Setting Description

Screen
(In RGB
Mode Only)

Customizes the PC display options in RGB mode.

Option

Resolution Selects a proper resolution.

Auto Configure Sets to adjust the screen position, clock, and phase automatically.

Position/Size/
Phase

Reset Restores the options to the default setting.

The displayed image may be unstable for a few seconds while the
configuration is in progress.

Adjusts the options when the picture is not clear, especially when
characters are shaky, after the auto configuration.

Basic image options

Setting Description

Backlight Adjusts the brightness of the screen by controlling the LCD backlight. If you

Contrast Increases or decreases the gradient of the video signal. You may use Contrast

Brightness Adjusts the base level of the signal in the picture. You may use Brightness when

Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the

Color Adjusts intensity of all colors.

Tint Adjusts the balance between red and green levels.

Color Temp. Set to warm to enhance hotter Colors such as red, or set to cool to make picture

Advanced Control/
Expert Control

Picture Option Sets additional picture option.

Picture Reset Restores the options to the default setting.

decrease the brightness level, the screen becomes darker and the power
consumption will be reduced without any video signal loss.

when the bright part of the picture is saturated.

the dark part of the picture is saturated.

picture. The lower the level, the softer the image.

bluish.

You can adjust the picture for each Picture Mode, or adjust the picture settings
according to a specific picture image. First, select a desired Picture Mode.
* This option is unavailable if Picture Mode is set to Vivid.

ENGLISH

NOTE

y When you select a picture mode, related menus are set automatically.
y When using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.
y If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.

22

Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration)

ENGLISH

Setting Description

Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image.

Dynamic Color Adjusts color for more natural-looking colors.

Color Gamut Selects the range of colours that can be expressed.

Skin Color Skin color spectrum can be separately set to implement the skin color as defined by

Sky Color Sky color is set separately.

Grass Color Natural color spectrum (meadows, hills, etc.) can be separately set.

Gamma Sets the gradation curve according to the output of the picture signal in relation to the

Expert Control - Picture Mode (Cinema/ Expert1/ Expert2)

Setting Description

Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image.

Color Gamut Selects the range of colours that can be expressed.

Edge Enhancer Shows clearer and distinctive yet natural edges of the video.

Color Filter Filters a specific colour spectrum in RGB colours to fine-tune colour saturation and

Color Temperature Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning

Color Management
System

the user.

input signal.

(Function works in the following mode - HDMI-DTV)

hue accurately.

can be set via Gamma method, etc.

This is a system that experts use when they adjust colour with a test pattern. They
can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without
affecting other colours. For normal images, adjustments may not result in noticeable
colour changes.

Picture Option - HDMI(DTV) Mode

Setting Description

Noise Reduction Reduces screen noise in the video.

MPEG Noise

Reduces noise caused by compressing digital video.

Reduction

Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture

input using the degree of darkness (black level) of the screen.

Real Cinema Optimizes the screen for movie viewing.

TruMotion
(This feature
is supported
by 65SE3B and
65SE3KB only.)

Corrects images to display smoother motion sequences.

• Off : Turn off the TruMotion.

• Smooth/ Clear : De-Judder / De-Blur can be set Auto.

• User : De-Judder / De-Blur can be set manually.

- De-Judder : This function adjusts juddering of
the screen.

- De-Blur : This function adjusts and eliminates blurring of the screen.

◄

TruMotion

• De-Judder Auto

• De-Blur Auto

Smooth

►

OK

23

AUDIO Settings

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to AUDIO and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

- To return to the previous level, press BACK.

When you are finished, press EXIT.

4

When you return to the previous menu, press BACK.

The available audio options are described in the following:

Setting Description

Sound Mode Allows optimized sound for custom Monitor installation.

Level

Standard Suitable for all types of video.

News/ Music/
Cinema/ Sport/
Game

Sound Effect the user can select various sound effects.

- Sound Effect function is available only for Standard mode in Sound Mode menu.

Level

Clear Voice ll Boosts voice clarity.

Virtual Surround LG’s proprietary audio processing technology allows 5.1ch-like

Equalizer Adjusts the volume to a level of your choice using the Equalizer.

Balance Adjusts left/right audio balance.

Reset You can reset the settings under the Sound Effects menu.

AV Sync. Adjust Synchronizes video and audio directly when they do not match.

If you set AV Sync. to ON, you can adjust the sound output to the screen image.

Speaker: Adjusts the synchronization of the sound from the speakers. The "-" button

makes the sound output faster and the "+" button slower than the default value.

Bypass : The audio of an external device without audio delay. Audio may be output

before video as it takes time to process video input into the Monitor.

Sets audio optimized for a specific genre.

surround sound from two speakers.

- If Clear Voice ll is set to On, Virtual Surround will not be

chosen.

ENGLISH

NOTE

y Some models may not have built-in speakers. In that case, you need to connect external speakers to listen to sound.

24

ENGLISH

TIME Settings

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to TIME and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

- To return to the previous level, press BACK.

When you are finished, press EXIT.

4

When you return to the previous menu, press BACK.

The available time settings are described in the following:

Setting Description

Clock Sets the time feature.

Level

Auto The current time is entered according to the selected country

Manual The current time needs to be entered manually.

On/Off Time Sets the time to turn on or off the monitor set.

Auto Off (15Min.) If Auto-off is active and there is no input signal, the set switches to off mode

automatically after 15 minutes.

Automatic Standby If the monitor is left unattended for a set period of time, it automatically goes into standby

mode.

when connected to a network.

NOTE

y Off Time/ On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time in the

schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the
current time.

y Once the on or off time is set, these functions operate daily at the preset time.
y When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on

time if the set is turned on, and vice versa if the set is turned off.

y If port 123 is blocked by a firewall, your monitor cannot receive the current time from the network.

25

OPTION Settings

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to OPTION and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

- To return to the previous level, press BACK.

When you are finished, press EXIT.

4

When you return to the previous menu, press BACK.

The available option settings are described in the following:

Setting Description

Language Selects a language for the display text.

Country Select your country.

DivX(R) VOD Registers or releases DivX.

Initial Setting Deletes all optional settings and returns to initial default mode.

Set ID You can assign a unique Set ID NO (name assignment) to each product when several

Tile Mode Tile Mode To use this function

Checks DivX Registration Code for playing DivX-protected videos.
Register at
Uses Registration Code to rent or purchase movies at
* Rented/purchased DivX files cannot be played if the DivX Registration Code of a
different device is used. Use only the DivX Registration Code granted to this device.
* Converted files not conforming to the DivX Codec Standard may not play or may
produce abnormal images.

products are connected for display. Specify the number (1 to 255 or 1 to 1,000) using the
button and exit. Use the assigned Set ID to individually control each product using the
Product Control Program.

Auto Config. Sets to adjust the screen position, clock, and phase automatically.

Position Moving the screen position horizontally and vertically.

Size Adjust the horizontal and vertical size of the screen taking into

Natural The image is omitted by the distance between the screens to be

Reset Function to initialize and release Tile.

http://vod.divx.com

- Must be displayed with various other products.

- Select Tile Mode, set rows and columns, and then enter the tile ID to
set the location.

- Tile Mode: row x column (row = 1-15, column = 1-15).

- 15 x 15 available.

The displayed image may be unstable for a few seconds while the
configuration is in progress.

account the size of the bezel.

naturally shown.

All Tile setting are released when selecting Tile recall and the screen
returns to Full screen.

.

www.divx.com/vod

.

ENGLISH

26

ENGLISH

SETTINGS Description

Contents Schedule Creates simple schedules and sets playback using files in My Media.

Level

Add Schedule Creates a contents schedule.

- Media: Select the file to which you want to apply the contents
schedule.

- Select [Create] to register the contents schedule.

Play Plays a contents schedule.

Delete All Deletes all registered schedules.

NOTE

yInformation about registered schedules is stored on your USB storage device.

This feature does not work when your USB storage device has been removed.

yThe picture size is 1920 x 1080.
yYou can use photo and video files only.
yYou can add up to 50 files (photo files + video files = 50).
yOnly photos whose resolution is 1920 x 1080 or below are supported.
yThe default display time for photos is 1 minute. Playback time for movies

differs depending on the running time.

yYou can create up to 7 schedules.
yYou cannot register a schedule when no file has been selected.
yContents schedules that have had information forcibly modified using a PC,

etc. may not function properly.

yWith respect to the playback of distribution or contents schedules through

SuperSign Software, the schedule executed last time is played.

27

Tile Mode

This monitor can be tiled with additional monitors to create a large tiled display.

Off

When the Tile Mode

1X2

When using 2 monitors

2X2

When using 4 monitors

option is disabled

ID 3

ID 2

ID 4

ID 1

ID 2

ID 1

Tile ID

4X4

When using 16 monitors

ID 1

ID 5

ID 9

ID 2

ID 6

ID 10

ID 3

ID 7

ID 11

ID 4

ID 8

ID 12

5X5

When using 25 monitors

ID 3

ID 2

ID 1

ID 8

ID 7

ID 6

ID 13

ID 12

ID 11

3X3

When using 9 monitors

ID 1

ID 4

ID 7

ID 4 ID 5

ID 9 ID 10

ID 14 ID 15

ID 2

ID 5

ID 8

ENGLISH

ID 3

ID 6

ID 9

ID 13

ID 14

ID 15

ID 16

ID 16

ID 21

ID 17

ID 22

ID 18

ID 23

ID 19

ID 24

ID 20

ID 25

Tile Mode - Natural mode

When active, the part of the image that would normally be displayed in the gap between the monitors
is omitted.

Before After

28

ENGLISH

NETWORK Settings

Press SETTINGS to access the main menus.

1

Press the navigation buttons to scroll to NETWORK and press OK.

2

Press the navigation buttons to scroll to the setting or option you want and press OK.

3

- To return to the previous level, press BACK.

When you are finished, press EXIT.

4

When you return to the previous menu, press BACK.

The available option settings are described in the following:

Setting Description

Network Setting Configure the network settings.

Network setting When the Wi-Fi dongle is connected, you can view and connect to

any available wireless network.

Network Status Display the network status.

Network Connection Options

Setting Description

Setting from the AP list Select an AP to connect to a wireless network.

Simple setting
(WPS-button mode)

Press the button on the wireless router that supports PBC to easily connect
to the router.

29

IR CODES

y All models do not support the HDMI/USB function.
y Some key codes are not supported depending on the model.

Code (Hexa) Function Note

08

0B INPUT R/C BUTTON

C4 MONITOR ON R/C BUTTON

C5 MONITOR OFF R/C BUTTON

95

DC 3D R/C BUTTON

10 to 19 Number Key 0 to 9 R/C BUTTON

53 1/a/A R/C BUTTON

2F CLEAR R/C BUTTON

02

03

79 ARC R/C BUTTON

99 AUTO R/C BUTTON

09 MUTE R/C BUTTON

E0 BRIGHTNESS (Page UP) R/C BUTTON

E1 BRIGHTNESS (Page Down) R/C BUTTON

4D PSM R/C BUTTON

AA

5F W.BAL R/C BUTTON

43 SETTINGS R/C BUTTON

40 Up R/C BUTTON

41 Down R/C BUTTON

07 Left R/C BUTTON

06 Right R/C BUTTON

3F S.MENU R/C BUTTON

44 OK R/C BUTTON

28 BACK R/C BUTTON

5B EXIT R/C BUTTON

7E R/C BUTTON

7B TILE (Tile Mode) R/C BUTTON

B1 R/C BUTTON

B0 R/C BUTTON

BA R/C BUTTON

Power

ENERGY SAVING ( )

Volume

Volume

INFO

R/C BUTTON

R/C BUTTON

R/C BUTTON

R/C BUTTON

R/C BUTTON

ENGLISH

30

ENGLISH

Code (Hexa) Function Note

8F R/C BUTTON

8E R/C BUTTON

72 Red Key (PICTURE ID ON) R/C BUTTON

71 Green Key (PICTURE ID OFF) R/C BUTTON

63 Yellow Key R/C BUTTON

61 Blue Key R/C BUTTON

31

TO CONTROL MULTIPLE PRODUCTS

y Use this method to connect several products to a single PC. You can control several products at a time by connecting

them to a single PC.

y In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated.

Connecting the Cable

Connect the RS-232C cable as shown in the picture.

y The RS-232C protocol is used for communication between the PC and product. You can turn the product on or off,

select an input source or adjust the OSD menu from your PC.

PC

RS-232C Cable
(not included)

RS-232C

OUT

RS-232C

IN

RS-232C

OUT

RS-232C

IN

RS-232C

OUT

4P Cable
(not included)

RS-232C

IN

Monitor 1 Monitor 2 Monitor 3Monitor 4

RS-232C

OUT

RS-232C

IN

RS-232C Gender

ENGLISH

32

ENGLISH

RS-232C Configurations

4P Cable

4-Wire Configurations (Standard RS-232C cable)

Set

RXD
TXD
GND

IR

NOTE

• When using three-wire connections (non-

standard), an IR daisy chain cannot be used.

• If you want to control multiple units

simultaneously, use 3.5 mm 4-pole cables (sold
separately).

RS-232C Cable

8-Wire Configurations (Standard RS-232C cable)

PC RS-232C

DCD

1

RXD

2

TXD

3

GND

5

DTR

4

DSR

6

RTS

7

CTS

8

D-Sub 9 D-Sub 9

(Female) (Female)

Gender

Communication Parameter

• Baud Rate : 9600 BPS

• Data Length : 8 bit

• Parity Bit : None

• Stop Bit : 1 bit

Set

TXD
RXD
GND

IR

DCD

1

TXD

3

RXD

2

GND

5

DSR

6

DTR

4

CTS

8

RTS

7

• Flow Control : None

• Communication Code : ASCII code

• Use a crossed (reverse) cable

33

Command Reference List

COMMAND

1 2

01 Power k a 00 to 01

02 Select input x b See [Select input]

03 Aspect ratio k c See [Aspect ratio]

04 Energy saving j q See [Energy saving]

05 Picture mode d x See [Picture mode]

06 Contrast k g 00 to 64

07 Brightness k h 00 to 64

08 Sharpness k k 00 to 32

09 Color k i 00 to 64

10 Tint k j 00 to 64

11 Color temperature x u 00 to 64

12 H position f q 00 to 64

13 V position f r 00 to 64

14 H size f s 00 to 64

15 Auto Config. j u 01

16 Balance k t 00 to 64

17 Sound Mode d y See [Sound mode]

18 Mute k e 00 to 01

19 Volume k f 00 to 64

20 Clock 1 (year/month/day) f a See [Clock 1]

21 Clock 2 (hour/minute/second) f x See [Clock 2]

22 Off time schedule f c 00 to 01

23 On time schedule f b 00 to 01

24 Off timer (repeat mode/time) f e See [Off timer]

25 On timer (repeat mode/time) f d See [On timer]

26 On timer input f u See [On timer input]

27 Automatic Standby m n 00 to 01

28 Auto off f g 00 to 01

29 Language f i See [Language]

30 Reset f k 00 to 02

31 Current temperature d n FF

32 Key m c See [Key]

33 Time elapsed d l FF

34 Product serial number f y FF

(Hexadecimal)

ENGLISH

DATA

34

ENGLISH

COMMAND

1 2

35 Software version f z FF

36 White balance red gain j m 00 to FE

37 White balance green gain j n 00 to FE

38 White balance blue gain j o 00 to FE

39 Backlight m g 00 to 64

40 Screen off k d 00 to 01

41 Tile Mode d d See [ Tile Mode]

42 Tile Mode Check d z FF

43 Tile ID d i Refer to ‘Tile ID'.

44 Tile H Position d e 00 to 32

45 Tile V Position d f 00 to 32

46 Tile H Size d g 00 to 32

Tile V Size

47

48 Natural Mode (In Tile mode) d j 00 to 01

d h

00 to 32

(Hexadecimal)

NOTE

DATA

y During USB operations such as Dvix or EMF, all commands except Power (k a) and Key (m c) are not executed and

treated as NG.

y Some commands are not supported depending on the model.
y The ‘f f’ command which shows the status of a certain command does not display the OSD as the result in order to be

compatible with SuperSign program.

35

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

* [Command1] Identifies the factory setting and the user setting modes.

* [Command2] Controls monitors.

* [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set from 1

to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under
OPTION in the OSD menu. Selecting '00H' or '000H' for Set ID allows the simultaneous control
of all connected monitors. (It may not be supported depending on the model.)

* [Data] Transmits command data.

Data count may increase depending on the command.

* [Cr] Carriage Return. Corresponds to '0x0D' in ASCII code.

* [ ] White Space. Corresponds to '0x20' in ASCII code.

Acknowledgement

[Command2][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

* The Product transmits an ACK (acknowledgement) based on this format when receiving normal data. At this

time, if the data is FF, it indicates the present status data. If the data is in data write mode, it returns the data
of the PC computer.

* If a command is sent with Set ID '00' (=0x00) or '000 (=0x000)', the data is reflected to all monitor sets and

they do send any acknowledgement (ACK).

* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be

checked (only for some functions).

* Some commands may not be supported on some models.

36

01. Power (Command: k a)

ENGLISH

Controls the power on/off of the set.

Transmission

[k][a][ ][Set ID][ ][Data][Cr]

Data 00: Off
01: On

Acknowledgement

[a][ ][Set ID][ ][OK/NG][Data][x]

* Only when the monitor is fully powered on, the
acknowledgement signal is returned properly.
* There may be a delay between the transmission and
acknowledgement signals.

02. Select input (Command: x b)

Selects an input signal.

Transmission

[x][b][ ][Set ID][ ][Data][Cr]

Data 60: RGB
70: DVI-D (PC)
80: DVI-D (DTV )
90: HDMI (HDMI1) (DTV )
A0: HDMI (HDMI1) (PC)

Acknowledgement

[b][ ][Set ID][ ][OK/NG][Data][x]

* Some input signals may not be supported on some models.

04. Energy saving (Command: j q)

Sets the energy saving function.

Transmission

[j][q][ ][Set ID][ ][Data][Cr]

Data 00: Off
01: Minimum
02: Medium
03: Maximum
04: Automatic
05: Screen off

Acknowledgement

[q][ ][Set ID][ ][OK/NG][Data][x]

** This may not be supported on some models.

05. Picture mode (Command: d x)

Selects a picture mode.

Transmission

[d][x][ ][Set ID][ ][Data][Cr]

Data 00: Vivid
01: Standard
02: Cinema
03: Sport
04: Game
05: Expert 1
06: Expert 2
08: Eco
11 : Calibration

Acknowledgement

[x][ ][Set ID][ ][OK/NG][Data][x]

03. Aspect ratio (Command: k c)

Adjusts the aspect ratio.

Transmission

[k][c][ ][Set ID][ ][Data][Cr]

Data 01: 4:3
02: 16:9
04: Zoom (HDMI)(DTV)
06: Auto ratio (HDMI)(DTV)
09: Original (≥ 720p) (HDMI) (DTV )
10 to 1F: Cinema zoom 1 to 16 (HDMI) (DTV)
* Available data types differ depending on the input signal. For more
information, see the aspect ratio section of the owner's manual.
* The aspect ratio may differ depending on the model's input
configuration.

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

Adjusts the screen contrast.

Transmission

[k][g][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Contrast 0 to 100

Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

37

07. Brightness (Command: k h)

Adjusts the screen brightness.

Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Brightness 0 to 100

Acknowledgement

[h][ ][Set ID][ ][OK/NG][Data][x]

08. Sharpness (Command: k k)

Adjusts the screen sharpness.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data 00 to 32: Sharpness 0 to 50

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

10. Tint (Command: k j)

Adjusts the screen tint.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Tint red 50 to green 50

Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data][x]

11. Color temperature (Command: x u)

Adjusts the screen color temperature.

Transmission

[x][u][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Warm 50 to cool 50

Acknowledgement

[u][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

09. Color (Command: k i)

Adjusts the screen color.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Color 0 to 100

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

12. H position (Command: f q)

Adjusts the horizontal position of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)

Transmission

[f][q][ ][S et ID][ ][Data][Cr]

Data 00 to 64: Min -50 (left) to max 50 (right)

Acknowledgement

[q][ ][Set ID][ ][OK/NG][Data][x]

38

13. V position (Command: f r)

ENGLISH

Adjusts the vertical position of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)

Transmission

[f][r][ ][S et ID][ ][Data][Cr]

Data 00 to 64: Min -50 (down) to max 50 (up)

Acknowledgement

[r][ ][Set ID][ ][OK/NG][Data][x]

14. H size (Command: f s)

Adjusts the horizontal size of the screen.
This function is only available when the Tile Mode is set to Off.
* The operational range varies depending on the RGB input
resolution.
(Only available in RGB-PC input mode)

Transmission

[f][s][ ][S et ID][ ][Data][Cr]

Data 00 to 64: Min -50 (small) to max 50 (large)

Acknowledgement

[s][ ][Set ID][ ][OK/NG][Data][x]

16. Balance (Command: k t)

Adjusts the sound balance.

Transmission

[k][t][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Left 50 to right 50

Acknowledgement

[t][ ][Set ID][ ][OK/NG][Data][x]

17. Sound mode (Command: d y)

Selects a sound mode.

Transmission

[d][y][ ][Set ID][ ][Data][Cr]

Data 01: Standard
02: Music
03: Cinema
04: Sport

05. Game

07. News

Acknowledgement

[y][ ][Set ID][ ][OK/NG][Data][x]

15. Auto Config. (Command: j u)

Automatically corrects position and shaking of the picture.
(Only available in RGB-PC input mode)

Transmission

[j][u][ ][Set ID][ ][Data][Cr]

Data 01: Execution

Acknowledgement

[u][ ][Set ID][ ][OK/NG][Data][x]

18. Mute (Command: k e)

Mutes/unmutes the sound.

Transmission

[k][e][ ][Set ID][ ][Data][Cr]

Data 00: Mute
01: Unmute

Acknowledgement

[e][ ][Set ID][ ][OK/NG][Data][x]

39

19. Volume (Command: k f)

Adjusts the playback volume.

Transmission

[k][f][ ][S et ID][ ][Data][Cr]

Data 00 to 64: Volume 0 to 100

Acknowledgement

[f][ ][S et ID][ ][OK/NG][Data][x]

20. Clock 1 (year/month/day) (Command: f a)

Adjusts the Clock 1 (year/month/day) value.

Transmission

[f][a][ ][S et ID][ ][Data1][ ][Data2][ ][Data3][Cr]

Data1 00 to 14: Year 2010 to 2040
Data2 01 to 0C: January to December
Data3 01 to 1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Clock 1 (year/month/day)
settings.

Acknowledgement

[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

22. Off time schedule (Command: f c)

Enables/disables the on time schedule.

Transmission

[f][c][ ][S et ID][ ][Data][Cr]

Data 00: Off
01: On

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

23. On time schedule (Command: f b)

Enables/disables the on time schedule.

Transmission

[f][b][ ][Set ID][ ][Data][Cr]

Data 00: Off
01: On

Acknowledgement

[b][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

21. Clock 2 (hour/minute/second) (Command: f x)

Adjusts the Clock 2 (hour/minute/second) value.

Transmission

[f][x][ ][S et ID][ ][Data1][ ][Data2][ ][Data3][Cr]

Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter "fa [Set ID] ff" to view the Clock 2 (hour/minute/second)
settings.
** This function is only available when Clock 1 (year/month/
day) is set.

Acknowledgement

[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

40

24. Off timer (repeat mode/time) (Command: f e)

ENGLISH

Configures the off time (repeat mode/time) settings.

Transmission

[f][e][ ][S et ID][ ][Data1][ ][Data2][ ][Data3][Cr]

Data1

1. F1 to F7 (reading data)
F1: Read the 1st off timer data
F2: Read the 2nd off timer data
F3: Read the 3rd off timer data
F4: Read the 4th off timer data
F5: Read the 5th off timer data
F6: Read the 6th off timer data
F7: Read the 7th off timer data

2. E1 to E7 (deleting one index), E0 (deleting all indexes)
E0: Erase all off timer setting
E1: Erase the 1st off timer setting
E2: Erase the 2nd off timer setting
E3: Erase the 3rd off timer setting
E4: Erase the 4th off timer setting
E5: Erase the 5th off timer setting
E6: Erase the 6th off timer setting
E7: Erase the 7th off timer setting

3. 01 to 0C (setting the day of the week for off timer)
01: Once

02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun

06. Every Sunday

07. Every Monday

08. Every Tuesday

09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
* To read or delete the Off Time list, set FFH for [Data2] and
[Data3].
Example 1: fe 01 f1 ff ff - Read the 1st index data from off timer.
Example 2: fe 01 e1 ff ff - Delete the 1st index data from off
timer.
Example 3: fe 01 04 02 03 - Sets Off Timer to 02:03 for Monday­Saturday.
* This function is only available when Clock 1 (year/month/day)
and Clock 2 (hour/minute/second) are set.

Acknowledgement

[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

25. On timer (repeat mode/time) (Command: f d)

Configures the on time (repeat mode/time) settings.

Transmission

[f][d][ ][S et ID][ ][Data1][ ][Data2][ ][Data3][Cr]

Data1

1. F1 to F7 (reading data)
F1: Read the 1st on timer data
F2: Read the 2nd on timer data
F3: Read the 3rd on timer data
F4: Read the 4th on timer data
F5: Read the 5th on timer data
F6: Read the 6th on timer data
F7: Read the 7th on timer data

2. E1 to E7 (deleting one index), E0 (deleting all indexes)
E0: Erase all on timer setting
E1: Erase the 1st on timer setting
E2: Erase the 2nd on timer setting
E3: Erase the 3rd on timer setting
E4: Erase the 4th on timer setting
E5: Erase the 5th on timer setting
E6: Erase the 6th on timer setting
E7: Erase the 7th on timer setting

3. 01 to 0C (setting the day of the week for the on timer)
01: Once

02. Daily
03: Mon - Fri
04: Mon - Sat
05: Sat - Sun

06. Every Sunday

07. Every Monday

08. Every Tuesday

09. Every Wednesday
0A. Every Thursday
0B. Every Friday
0C. Every Saturday
Data2 00 to 17: 00 to 23 hours
Data3 00 to 3B: 00 to 59 minutes
* To read or delete an on timer list you have set, [Data2][Data3]
must be set to FFH.
Example 1: fd 01 f1 ff ff - Read the 1st index data from on timer.
Example 2: fd 01 e1 ff ff - Delete the 1st index data from on
timer.
Example 3: fd 01 04 02 03 - Set on timer at 02:03 on Monday to
Saturday.
* This function is only available when Clock 1 (year/month/day)
and Clock 2 (hour/minute/second) are set.

Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

41

26. On timer input (Command: f u)

Adds a new schedule entry by selecting input for the current on
timer setting.

Transmission

[f][u][ ][S et ID][ ][Data1][Cr]

[f][u][ ][S et ID][ ][Data1][Data2][Cr]

Data (adding schedule)
60: RGB
70: DVI-D
90: HDMI (HDMI1)

Data1

1. f1h to f7h (reading data)
F1: Select the 1st schedule input source
F2: Select the 2nd schedule input source
F3: Select the 3rd schedule input source
F4: Select the 4th schedule input source
F5: Select the 5th schedule input source
F6: Select the 6th schedule input source
F7: Select the 7th schedule input source

Data2

1. ffh (reading data)
To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when attempting to read
or change the schedule data, the text NG will be displayed and
the operation will fail.
(Example 1: fu 01 60 - Move existing schedule entries down
one row each and save RGB as input source for the 1st schedule
entry.)
(Example 2: fu 01 f1 ff - Read the 1st schedule input data.)
* This function is only supported when 1 (year/month/date), 2
(hour/minute/second) and On Time (repeat mode/time) are set.
** Input may not be supported on some models.

Acknowledgement

[u][ ][Set ID][ ][OK/NG][Data][x]

[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]

28. Auto off (Command: f g)

Configures the automatic off settings.

Transmission

[f][g][ ][S et ID][ ][Data][Cr]

Data 00: Off ( Will not turn off after 15 minutes)
01: On (Off after 15 minutes)

Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

29. Language (Command: f i)

Sets the OSD language.

Transmission

[f][i][ ][S et ID][ ][Data][Cr]

Data 00: Czech
01: Danish
02: German
03: English
04: Spanish (Europe)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Portuguese (Brazil)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Cantonese)
11: Japanese
12: Chinese (Mandarin)

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

27. Automatic standby (Command: m n)

Configures the automatic standby settings.

Transmission

[m][n][ ][Set ID][ ][Data][Cr]

Data 00: Off (Will not turn off after 4/6/8 hours)
01: 4 hours (Off after 4 hours)
02: 6 hours (Off after 6 hours)
03: 8 hours (Off after 8 hours)

Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

42

30. Reset (Command: f k)

ENGLISH

Resets settings for Picture, Screen and Audio or restores factory
settings.
(Screen reset can only be performed in RGB input mode.)

Transmission

[f][k][ ][S et ID][ ][Data][Cr]

Data 00: Picture reset
01: Screen reset
02: Initial settings (factory reset)

Acknowledgement

[k][ ][Set ID][ ][OK/NG][Data][x]

31. Current temperature (Command: d n)

Checks the inside temperature value.

Transmission

[d][n][ ][Set ID][ ][Data][Cr]

Data FF: Check status

Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

* Temperature is displayed as a hexadecimal value.

33. Time elapsed (Command: d l)

Checks the elapsed time.

Transmission

[d][l][ ][Set ID][ ][Data][Cr]

Data FF: Read status

Acknowledgement

[l][ ][Set ID][ ][OK/NG][Data][x]

* The data received is shown as a hexadecimal value.

34. Product serial number (Command: f y)

Checks the serial number of the product.

Transmission

[f][y][ ][S et ID][ ][Data][Cr]

Data FF: Check product serial number

Acknowledgement

[y][ ][Set ID][ ][OK/NG][Data][x]

* Data is in ASCII code.

32. Key (Command: m c)

Sends a key code for the IR remote control.

Transmission

[m][c][ ][Set ID][ ][Data][Cr]

Data IR_KEY_CODE

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

For key codes, see IR Codes.
* Some key codes may not be supported on some models.

35. Software version (Command: f z)

Checks the software version of the product.

Transmission

[f][z][ ][S et ID][ ][Data][Cr]

Data FF: Check software version

Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data][x]

43

36. White balance red gain (Command: j m)

Adjusts the white balance red gain value.

Transmission

[j][m][ ][Set ID][ ][Data][Cr]

Data 00 to FE: Red gain 0 to 254

Acknowledgement

[m][ ][Set ID][ ][OK/NG][Data][x]

37. White balance green gain (Command: j n)

Adjusts the white balance green gain value.

Transmission

[j][n][ ][Set ID][ ][Data][Cr]

Data 00 to FE: Green gain 0 to 254

Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

39. Backlight (Command: m g)

Adjusts the back light brightness.

Transmission

[m][g][ ][Set ID][ ][Data][Cr]

Data 00 to 64: Back light brightness 0 to 100

Acknowledgement

[g][][set ID][][OK/NG][Data][x]

** This may not be supported on some models.

40. Screen off (Command: k d)

Turns the screen on or off.

Transmission

[k][d][ ][Set ID][ ][Data][Cr]

Data 00: Turns the screen on
01: Turns the screen off

Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

38. White balance blue gain (Command: j o)

Adjusts the white balance blue gain value.

Transmission

[j][o][ ][Set ID][ ][Data][Cr]

Data 00 to FE: Blue gain 0 to 254

Acknowledgement

[o][ ][Set ID][ ][OK/NG][Data][x]

41. Tile Mode (Command: d d)

To set a Tile Mode and Tile Column/ Row values.

Transmission

[d][d][ ][Set ID][ ][Data][Cr]

Data 00 to FF: 1st byte - Tile Row

*00, 01, 10, 11 means Tile Mode Off
** It may not be supported depending on the model.

Acknowledgement

[d][ ][Set ID][ ][OK/NG][Data][x]

2nd byte - Tile Column

44

42. Tile Mode Check (Command: d z)

ENGLISH

To check Tile Mode status.

Transmission

[d][z][ ][Set ID][ ][Data][Cr]

Data FF: Check Tile Mode status.
** It may not be supported depending on the model.

Acknowledgement

[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

Data1 00: Tile Mode Off
01: Tile Mode On
Data2 00 to 0F: Tile Row
Data3 00 to 0F: Tile Column

43. Tile ID (Command: d i)

To set Tile ID.

Transmission

[d][i][ ][Set ID][ ][Data][Cr]

Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile Row).
** It may not be supported depending on the model.

Acknowledgement

[i][ ][Set ID][ ][OK/NG][Data][x]

*NG will be return if data is over (Tile Column) x (Tile Row),
except 0xFF.

45. Tile V Position (Command: d f)

To adjust the Tile Vertical position.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][f][ ][S et ID][ ][Data][Cr]

Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.

Acknowledgement

[f][ ][S et ID][ ][OK/NG][Data][x]

46. Tile H Size (Command: d g)

To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H Size.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][g][ ][Set ID][ ][Data][Cr]

Data 00 to 32: 0 to 50
** It may not be supported depending on the model.

Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

44. Tile H Position (Command: d e)

To adjust the Tile Horizontal position.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][e][ ][Set ID][ ][Data][Cr]

Data 00 to 32: -50 (Left) to 0 (Right)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.

Acknowledgement

[e][ ][Set ID][ ][OK/NG][Data][x]

47. Tile V Size (Command: d h)

To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V Size.
* This function is available only when the Natural option of the
Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][h][ ][Set ID][ ][Data][Cr]

Data 00 to 32: 0 to 50
** It may not be supported depending on the model.

Acknowledgement

[h][ ][Set ID][ ][OK/NG][Data][x]

45

48. Natural Mode (In Tile Mode) (Command : d j)

To display the image naturally, the part of the image that would
normally be displayed in the gap between the monitors is
omitted.

Transmission

[d][j][ ][Set ID][ ][Data][Cr]

Data 00: Off
01: On

Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH