LG 55LY750H INSTALLATION MANUAL

INSTALLATION MANUAL

LED TV

Please read this manual carefully before operating your set and retain it for future reference.

LY75**

www.lg.com

CONTENTS

LOCATION AND FUNCTION OF CONTROLS .................... 2

Parts and buttons ........................................................ 2

EZMANAGER

Introduction ............................................................. 3

EZ-Manager Wizard ...................................................... 3

Automatically for Setup ........................................... 4~6

Manually for Setup............................................... 7~9

USB LG Smart Install Utility ..................................... 10~11

INSTALLATION MENU

Introduction ............................................................ 12

LG Hotel Mode Setup ................................................. 13~17

USB Cloning ........................................................... 18

Send To USB ........................................................ 19

Receive From USB.................................................... 19

Loge Image Download ................................................. 20

Password Change....................................................... 21

Set ID Setup ........................................................... 22

Configuration Setup .................................................. 23~25

External Speaker........................................................ 26

Speaker Output Setup ................................................. 27

Network Setup ...................................................... 28~29

Pro:Centric.......................................................... 30~31

Power Saving .......................................................... 32

CEC Setup ............................................................ 33

Clock Setup ........................................................... 34

PreLoadedApp Setup .................................................... 35

Media Share ........................................................... 36

DOWNLOAD EXTRA CONTENTS .............................37~38

Download Extra Contents(flash file) toTV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DOWNLOAD A SPLASH IMAGE...............................39~40

Download Splash Image file to TV set....................................... 37

LOCATION AND FUNCTION OF CONTROLS

Parts and buttons

* Image shown may differ from your TV.

A type : LY750*, LY755*

Screen

Speakers

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

B type : LY751*

Screen

Speakers

Remote control and

Intelligent1

Power Indicator

sensors

Joystick Button

Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

Joystick Button - This button is located below the TV screen.

NOTE

You can set the power indicator light to on or off by selecting OPTION in the main menus.



No Pro:Centric

EZMANAGER

Introduction

The Pro:Centric Platform enables you to simply install, manage and use guest-centric solutions. The default Domain "procentric.local" and IP Server Address are needed to be registered in DNS TV will contact the IP Server using the default Domain "procentric.local" via IP on server search page. If TV doesn't contact the Server, TV will search the pre-defined channel earlier than all channels (DVB-C only)

The frequencies of pre-defined channels are ‘794000, 714000, 634000, 554000, 474000, 394000,

314000, 234000, 154000, 90000 khz’.

EZ-Manager Wizard

Image shown may differ from your TV.



EZ-Manager Wizard

Welcome to LG’s EZ-Manager Wizard

Use this setup wizard to configure the TV for Pro:Centric and/or Free-

To-Guest (FTG) operation. Select ‘Next’ to continue.

If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this TV for FTG Mode, you may exit the wizard. Select ‘No Pro:Centric’ to disable the Pro:Centric feature of this TV, or select ‘Exit’ to quit.

This setup wizard will start automatically in 10 seconds.

Exit

- If you are using Pro:Centric, this setup wizard till help you easily set up the TV. Select 'Next' to continue.

- Otherwise, you may select either 'No Pro:Centric', if you will not be installing a Pro:Centric Server or 'Exit' to quit.

EZ-Manager Wizard - Automatically for Setup

EZ-Manager Wizard

2 3 4

Exit Next

Room Number

USB Configuration

TV Configuration Options

To configure the TV for Pro:Centric operation, select ‘Next’.

To set the optional Room Number, select ‘Room Number’.

To access the TV’s USB Download Menu, select ‘USB Configuration’.

This setup wizard will continue automatically in 60 seconds.

USB Configuration

1. From the TV Configuration Options screen, you can choose how to proceed with the configuration of this TV. Whether you will configure the TV for Pro:Centric operation via the wizard or use a USB memory device to configure the TV, you may first wish to set the Room Number on the TV.

- If you intend to set Room Number as part of the TV configuration, use the Room Number option to assign the Room # for this TV before you continue with additional configuration.

- In the Label field, use the Up/Down arrow keys to specify a North, South, East, or West designation for this TV.

- In the Room Number field, you can use the number keys on the Installer Remote to direct enter a room number.

- To continue, move and select 'Next'.

EZ-Manager Wizard

2 3 4

Label, Room Number

Select a Label and/or use the alpha/numeric keypad on the remote to input the Room Number.

When done, select ‘Next’ to continue.

Label Room Number

Exit Next

1 7 1 6

Room Number

2. This step automatically searches for the Pro:Centric Server. If was found the Pro:Centric data channel, select the "Next".

EZ-Manager Wizard Room # 1716

1 3 4

Searching for Pro:Centric Server...

It may take 1 min 00 second(s).

This step automatically searches for the pro:centric Server. If there is no Pro:Centric Server installed, you do not need continue with this procedure. Please select either ‘Exit’ or ‘Manual Pro:Centric’.

Status : Tuning Frequency 698000 (KHz) TV is now searching all of the channels for the data channel...

Back

Exit

Manual Pro:Centric

EZ-Manager Wizard Room # 1716

1 3 4

Pro:Centric Server was found...

It may take 5 min 00 second(s).

The Pro:Centric data channel was found!! (Data Channel: 698000, Mode:GEM) The Download window will open in 5 seconds. You may wait or select ‘Next’. Otherwise, if you select ‘Exit’, the Pro:Centric Server settings can be retained and used during the next download when you select ‘Save & Exit’ in the Exit Window.

Status : Tuning Frequency 698000 (KHz) The Pro:Centric data channel is found!! (Data Channel: 698000, Mode: GEM)

Back

Exit

Manual Pro:Centric

3. Downloading the Pro:Centric application files takes few minutes.

EZ-Manager Wizard Room # 1716

1 2 4

Processing the Pro:Centric Configuration...

Downloading the Pro:Centric application files takes a few minutes.

Please wait...

10%

Retrieving files from data Freuquency 698000

Application files

Maintenance files

- Updating Configuration File

- Updating Splash Logo Image

Warning - Do not remove AC power or the signal cables during these steps.

4. After the installation is completed, the following screen will be displayed..

In progress...

Pending...

EZ-Manager Wizard Room # 1716

1 32

EZ-Manager Configuration Complete

The TV will turn off in 10 second(s).

Installed Components

Pro:Centric Application Maintenance Files

GEM application downloaded Internal _CATV_ChMap_chOnly.tll marriott_logo.jpg

Turn OffReboot

EZ-Manager Wizard

2 3 4

Exit Next

Room Number

USB Configuration

TV Configuration Options

To configure the TV for Pro:Centric operation, select ‘Next’.

To set the optional Room Number, select ‘Room Number’.

To access the TV’s USB Download Menu, select ‘USB Configuration’.

This setup wizard will continue automatically in 60 seconds.

EZMANAGER

EZ-Manager Wizard - Manually for Setup

1. Select a Label and/or enter the Room Number using the numeric keypad on the remotes. To continue, move and select 'Next'.

2.Please select the 'Pro:Centric Manually'.

EZ-Manager Wizard Room # 1716

1 3 4

Searching for Pro:Centric Server...

It may take 1 min 00 second(s).

Status : Tuning Frequency 698000 (KHz)

Back

TV is now searching all of the channels for the data channel...

Exit

Manual Pro:Centric

3. Configure the appropriate Pro:Centric settings in the TV.

EZ-Manager Wizard Room # 1716

1 3 4

Pro:Centric Mode

Country

GEM

Australia

Media Type

Frequency (KHz)

Symbolrate (kS/s)

Modulation Signal Strength Signal Qualit

Back

Exit

EZ-Manager Wizard Room # 1716

1 3 4

Pro:Centric Mode

Country

Media Type

IP Address

Port

192

698000

6900

256QAM

data channel found

GEM

Australia

168

99%

Back

Exit

- If you select Country, you can change a country.

Australia India Indonesia

Malaysia Myanmar New Zealand

Singapore Sri Lanka Thailand

Vietnam --

IP Server found

4. Downloading the Pro:Centric application files takes few minutes.

EZ-Manager Wizard Room # 1716

1 2 4

Processing the Pro:Centric Configuration...

Downloading the Pro:Centric application files takes a few minutes.

Please wait...

10%

Retrieving files from data Freuquency 698000

Application files

Maintenance files

- Updating Configuration File

- Updating Splash Logo Image

Warning - Do not remove AC power or the signal cables during these steps.

5. After the installation is completed, the following screen will be displayed.

In progress...

Pending...

EZ-Manager Wizard Room # 1716

1 32

EZ-Manager Configuration Complete

The TV will turn off in 10 second(s).

Installed Components

Pro:Centric Application Maintenance Files

GEM application downloaded Internal _CATV_ChMap_chOnly.tll marriott_logo.jpg

Turn OffReboot

EZ-Manager Wizard - USB LG Smart Install Utility

TV Software Update(Expert)

The Follwing update les are found in the USB device. Select the le you want to apply to update this TV Or press EXIT to cancel the update.

TV Software Update

LOGO Image Download

1. Select the 'USB Configuration → USB Download Menu → Accessing USB Storage Device'.

EZ-Manager Wizard

2 3 4

Configure the TV using USB Memory Device

Insert a USB memory device, and then select ‘USB configuration’ to access the TV’s USB Download Menu.

(See Commercial Mode Setup Guide for more Information.)

Exit

USB Configuration

Room Number

USB LG Smart Install Utillity

All checked files will be downloaded when you press enter key.

Integrated USB Downloading

xxLY750H-ZA_Bootlogo.jpg

xxLY750H-ZA_Bootlogo2.jpg

xxLY750H-ZA_TLL_EU.tll

xxLY750H-ZA_CPU.epk

* If you have USB Memory for "lgsmartinstall" or "LGSMARTINSTALL" folder, this step automatically searches for the USB file list page.

2. Downloading the Pro:Centric application files takes few minutes.

USB LG Smart Install Utillity Room # 1716

Downloading Data...

Warning - Do not remove the USB device during this process

File Name:

Boot Logo File

File Name:

Software File(CPU)

File Name:

xxLY750H-ZA_TLL_EU.tll

xxLY750H-ZA_Bootlogo.jpg

xxLY750H-ZA_CPU.epk

ComleteMaintenance File

Ready

3. After the installation is completed, the following screen will be displayed..

USB LG Smart Install Utillity Room # 1716

Complete

This window will close in 3 second(s).

Installed Components

Mainenance File : Boot Logo File : Software File (CPU) :

xxLY750H-ZA_TLL_EU.tll xxLY750H-ZA_Bootlogo.jpg xxLY750H-ZA_CPU.epk

INSTALLATION MENU

Introduction

The abundant functions for Hotel TV linked with software installation can be projected on OSD as

‘Installation Menu’.

The wide range of hotel features can be performed simply on additional window to enhance the LG

hotel TV’s easy installation and convenient operation for Hotelier and System Integrators.

Image shown may differ from your TV.



PICTURE

SETUP

OPTIONLOCK

INPUT

TIMEAUDIO

Smart Share

C05

Installation Menu (V2.23)

LG Hotel Mode Setup

USB Cloning

Password Change

Set ID Setup

Configuration Setup

External Speaker

Network Setup

Pro:Centric

Power Saving

CEC Setup

Clock Setup

PreLoadedApp Setup

Media Share

S/W V 02.03.00.01 / MCU V 02.05 / FPGA V d. 279

Press the Setting button for more than 5 seconds using the user remote control, programme

information will appear at top left on the screen.

Enter a four digit password and press OK button.

• The TV is set with the initial password “1-1-0-5”.

Use the

button to select the desired menu.

+ 32 hidden pages