LG 42LY540H, 32LY540H, 55LY540H, 42LY540S, 32LY340C, 47LY540H, 55LY540S Owner’s Manual
OWNER’S MANUAL
LED TV
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LY33**
LY34**
LY54**
*
www.lg.com
TABLE OF CONTENTS
2
ENGLISH
ENG
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
4 ASSEMBLING AND
PREPARING
4 Unpacking
6 Parts and Button
7 Using the Joystick Button
8 Lifting and Moving the TV
9 Setting up the TV
9 - Attaching the Stand
10 - Mounting on a Table
11 - Mounting on a Wall
12 MAKING CONNECTIONS
20 TROUBLESHOOTING
21 SPECIFICATIONS
23 IR CODES
24 EXTERNAL CONTROL DEVICE
SETUP
24 RS-232C Setup
24 Type of Connector:
D-Sub 9-Pin Male
24 RS-232C Configurations
25 Communication Parameters
25 Command Reference List
26 Transmission / Receiving Protocol
20 Cleaning your TV
20 - Screen, Frame, Cabinet and Stand
20 - Power Cord
WARNING
yIf you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yIf you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-De nition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO:DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an of cial DivX Certi ed® device that has
passed rigorous testing to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi ed® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certi ed® to play DivX® video up to HD 1080p, including premium content.”
ENGENGLISH
“DivX®, DivX Certi ed® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
ENGLISH
<
<
ENG
ASSEMBLING AND PREPARING
4
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are
using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH
DRIVE does not fit into your TV’s USB port.
B
A
B
*A
10 mm
=
*B
18 mm
A
=
ASSEMBLING AND PREPARING
Remote Control,
Batteries (AAA)Owner’s Manual
5
ENGENGLISH
Cable Holder
(Depending on model)
Stand Screws
4EA, M4 x L14
(Only 42/47LY34**,
39/42/47/55LY54**)
Cable Managements
2EA
(Only 32/42/47LY34**,
32/39/42/47/55LY54**)
Stand Base
(Only 32/42/47LY34**,
32/39/42/47/55LY54**)
Power Cord
(Depending on model)
Stand Screws
4EA, M4 x L20
(Only 32LY34**, 32LY54**)
Wall Mount Spacers
2EA
(Only 42LY34**, 42LY54**)
AC-DC Adaptor
(Only 28LY33**)
(Depending on model &
country)
or
Stand Base
(Only 28LY33**)
(Depending on model &
country)
ASSEMBLING AND PREPARING
6
ENGLISH
ENG
Parts and Button
A type : 32/42/47LY34**, 32/39/42/47/55LY54**B type : 28LY33** (Except for India)
Remote control sensor
Power Indicator
Joystick button
Speakers
Screen
Speakers
1
Remote control sensor
Power Indicator
Screen
Joystick button
1
C type : 28LY33** (Only India)
Screen
Speakers
Remote Control Sensor
Power Indicator
Joystick Button
1
1 Joystick Button - This button is located below the TV screen.
NOTE
yYou can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING
7
Using the Joystick Button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
Power Off
Volume
Control
Programmes
Control
When the TV is turned off, place your finger on the joystick button
and press it once and release it.
When the TV is turned on, place your finger on the joystick button
and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left or
right, you can adjust the volume level you want.
If you place your finger over the joystick button and move it up or
down, you can scrolls through the saved programmes you want.
ENGENGLISH
NOTE
yWhen your finger over the joystick button and push it to the up, down, left or right, be careful not to
press the joystick button. If you press the joystick button first, you can not adjust the volume level and
saved chennels.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left or right.
TV OffTurn the power off.
SettingsAccesses the main menu.
Input ListChanges the input source.
CloseClears on-screen displays and return to TV viewing.
ASSEMBLING AND PREPARING
8
ENGLISH
ENG
Lifting and Moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally
came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should
face away from you to avoid damage.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose
the TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yDo not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
yHold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
CAUTION
yWhen handling the TV, be careful not to
damage the protruding joystick button.
(Depending on model)
the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
ASSEMBLING AND PREPARING
10
ENGLISH
ENG
Mounting on a Table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
2 Connect the power cord to a wall outlet.
10 cm
10 cm
CAUTION
yDo not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
yIf a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions such
as:
»Using cabinets or stands recommended
by the manufacturer of the television.
»Only using furniture that can safely
support the television.
»Ensuring the television is not
overhanging the edge of the supporting
furniture.
»Not placing the television on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the television to a suitable support.
»Not standing the televisions on cloth
or other materials placed between the
television and supporting furniture.
»Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
Securing the TV to a Wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
at surface.
CAUTION
yMake sure that children do not climb on or
hang on the TV.
NOTE
yUse a platform or cabinet that is strong and
large enough to support the TV securely.
yBrackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.