LG 55LF5950, 43LF590T Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your set and retain it for future reference.

40LF6350 43LF6350 49LF6350 55LF6350 60LF6350

40LF635T 43LF635T 49LF635T 55LF635T 60LF635T

*MFL68703302*

42LF6500 50LF6500 55LF6500 60LF6500

42LF650T 50LF650T 55LF650T 60LF650T

42LF640T 49LF640T 42LF6400 49LF6400 42LF645T 49LF645T 42LF6450 49LF6450

32LF595B 32LF595D 43LF590T 43LF5900 49LF590T 49LF5900 55LF5950 55LF595T

P/NO : MFL68703302 (1506-REV02)

www.lg.com

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

ENGLISH

equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

 Do not use this apparatus near water.

 Clean only with dry cloth.

 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

 Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

 Only use attachments/accessories specified by the

manufacturer.

 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

 Unplug this apparatus during lightning storms or

when unused for long periods of time.

 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

 Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

ENGLISH

 Do not expose to dripping or splashing and do

not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

 Do not press strongly upon the panel with a hand

or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

 Do not stick metal objects or any other conductive

material into the power cord. Do not touch the end of the power cord while it is plugged in.

 Keep the packing anti-moisture material or vinyl

packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

 CAUTION concerning the Power Cord

(Can differ by country): Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its

 Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power Supply

Circuit Breaker

 As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power source even if the unit is turned off.

 Do not attempt to modify this product in any way

without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

 Outdoor Antenna Grounding

(Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

ENGLISH

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

 Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

 Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

 Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

 If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.  Keep the product away from direct sunlight.  Never touch this apparatus or antenna during a

lightning storm.

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

 When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal cables on the back of the TV.

 Do not allow an impact shock or any objects to fall

into the product, and do not drop anything onto the screen.

 DISCONNECTING THE DEVICE FROM THE MAIN

POWER The power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

 Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

 This apparatus uses batteries. In your community

there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling

information.  Do not dispose of batteries in a fire.  Do not short circuit, disassemble, or allow the

batteries to overheat.  Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper). This may result in

product malfunction.  Dot Defect

The panel is a high technology product with

resolution of two million to six million pixels.

In a very few cases, you could see fine dots on

the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the

performance and reliability of the TV.  Generated Sound

Cracking noise A cracking noise that occurs when

watching or turning off the TV is generated by

plastic thermal contraction due to temperature

and humidity. This noise is common for products

where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a high-speed

switching circuit, which supplies a large amount of

current to operate a product. It varies depending

upon the product. This generated sound does

not affect the performance and reliability of the

product.  Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or

cause defects in the product.  Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.

 If the TV feels cold to the touch, there may be a

small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

 If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

 If the aspect ratio of the TV is set to 4:3 for a long

period of time, image burn may occur on the letterboxed area of the screen.

 Avoid displaying a fixed image on the TV screen

for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

Viewing 3D Imaging (For 3D models)

WARNING

Viewing Environment

Viewing Time



- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue, or eye strain.

Those that have a photosensitive seizure or chronic illness

Some users may experience a seizure or other



abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. Do not watch 3D videos if you feel nausea, are



pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

3D Contents are not recommended for those



who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. If you have strabismus (cross-eyed), amblyopia



(weak eyesight), or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. If your eyesight varies between your right and



left eye, correct your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

Do not watch 3D contents when you feel fatigue



from lack of sleep, overwork or drinking. When these symptoms are experienced, stop



using/watching 3D contents and get enough rest until the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, eyestrain, or fatigue.

CAUTION

Viewing Environment

Viewing Distance



- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

Infants / Children



- Usage/ Viewing 3D contents for children under the age of 5 is not recommended.

- Children under the age of 10 may overreact and become overly excited because their vision is in development, for example, trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

ENGLISH

Teenagers



- Teenagers may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

Elderly



- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise, you



may not be able to view 3D videos properly. Do not use 3D glasses instead of your normal



glasses, sunglasses, or protective goggles. Using modified 3D glasses may cause eye strain



or image distortion. Do not keep your 3D glasses in extremely high



or low temperatures. It will cause deformation. The 3D glasses are fragile and are easy to be



scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

ENGLISH

Preparing

NOTE Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ



slightly from that shown in this manual. The available menus and options may differ



from the input source or product model that you are using. New features may be added to this TV in the



future. The items supplied with your product may vary



depending upon the model. Product specifications or contents of this manual



may be changed without prior notice due to upgrade of product functions. For an optimal connection, HDMI cables and



USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if



the USB cable or USB flash drive does not fit into your TV’s USB port. Use a certified cable with the HDMI logo



attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

Recommended HDMI cable types (3 m or less)



- High-Speed HDMI®/

- High-Speed HDMI®/TM cable with Ethernet

CAUTION

Do not use any unapproved items to ensure the



safety and product’s lifespan. Any damages or injuries by using unapproved



items are not covered by the warranty. Some models appear to have a thin film on the



screen. It is actually part of the screen; do not remove it. When attaching the stand to the TV set, use the



correct size screw for your model. When attaching the stand to the TV set, place



the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Make sure that the screws are fastened tightly.



(If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not tighten the screws with too much force;



otherwise they may be damaged and come loose later.

cable

*A 10 mm *B

18 mm

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed manufacturer’s circumstances or policies.

(Depending upon model)

AN-MR6**

Magic Remote

AG-F***DP

Dual Play Glasses

AG-F***

Cinema 3D Glasses

LG Audio Device

AN-VC550

Smart Camera

AN-WF500

Wi-Fi/ Bluetooth DONGLE

Maintenance

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product lifespan.

CAUTION

Make sure to turn the power off and disconnect



the power cord and all other cables first. When the TV is left unattended or unused for a



long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

Do not push, rub, or hit the surface with your



fingernail or a sharp object, as this may result in scratches on the screen and image distortions. Do not use any chemicals, such as waxes,



benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration. Do not spray liquid onto the surface. If water



enters the TV, it may result in fire, electric shock, or malfunction.

Power Cord

Remove the accumulated dust or dirt on the power cord regularly.

Hold the top and bottom of the TV frame firmly.



Make sure not to hold the transparent part, speaker, or speaker grille area.

Use at least two people to move



a large TV. When transporting the TV by



hand, hold the TV as shown in the following illustration.

When transporting the TV, do not expose the TV



to jolts or excessive vibration. When transporting the TV, keep the TV upright;



never turn the TV on its side or tilt towards the left or right. When handling the TV, be careful not to



damage the protruding joystick button.

CAUTION

Avoid touching the screen at all times, as this



may result in damage to the screen. Do not place the product on the floor with its



front facing down without padding. Failure to do so may result in damage to the screen. Do not move the TV by holding the cable holder



and cable management, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

ENGLISH

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

It is recommended to move the TV in the box or



packing material that the TV originally came in. Before moving or lifting the TV, disconnect the



power cord and all cables.

When holding the TV, the screen



should face away from you to avoid damage.

Using the Joystick Button

(Image shown may differ from your TV.) You can operate the TV by pressing the button or

moving the joystick left, right, up, or down.

Joystick Button

Basic functions

Connect the power cord to a wall outlet.

When the TV is turned off, place your finger on the joystick button,

Power On

Power Off

Volume Control

Channels

press it once and release it.

When the TV is turned on, place your finger on the joystick button, press it once for a few seconds, and release it. All running apps will close and any recording in progress will stop.

Place your finger on the joystick button and move it left or right to adjust the volume level.

Place your finger on the joystick button and move it up or down to adjust the channel.

Control

NOTE Move the joystick button up, down, left, or right.



Be careful not to press it. If you press it first, you

ENGLISH

may not be able to adjust the volume or scroll through the channels.

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can adjust the menu items moving the joystick button up, down, left, or right.

Turns the power off. Accesses the quick settings. (Depending upon

model)

Clears on-screen displays and returns to TV viewing.

Changes the input source.

CAUTION

Do not place the TV near or on sources of heat,



as this may result in fire or other damage.

Using the Kensington Security System (optional)

(Depending upon model) (Image shown may differ from your TV.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit

www.kensington.com

. Connect the Kensington

http://

security system cable between the TV and a table.

NOTE The Kensington security system is optional. You



can obtain additional accessories from your local dealer.

Securing the TV to a Wall (optional)

(Depending upon model) (Image shown may differ from your TV.)

Mounting on a Table

(Image shown may differ from your TV.)

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

CAUTION

Make sure that children do not climb on or hang



on the TV.

NOTE Use a platform or cabinet that is strong and large



enough to support the TV securely. Brackets, bolts, and ropes are optional. You can



obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

10 cm

40/43LF635T 40/43LF6350

Model

VESA (A x B) 200 x 200 300 x 300 Standard screw M6 M6 Number of screws 4 4 Wall mount bracket

(optional)

Model

VESA (A x B) 300 x 300 400 x 400 Standard screw M6 M6 Number of screws 4 4 Wall mount bracket

(optional)

Model

VESA (A x B) 400 x 400 Standard screw M6 Number of screws 4 Wall mount bracket

(optional)

32LF595B 32LF595D 43LF590T 43LF5900

LSW240B MSW240

60LF6350 60LF635T

LSW350B LSW440B

60LF6500 60LF650T

LSW440B

49/55LF6350 49/55LF635T 49LF590T 49LF5900

LSW350B MSW240

42/50/55LF6500 42/50/55LF650T 42/49LF640T 42/49LF6400 42/49LF645T 42/49LF6450 55LF5950 55LF595T

MSW240

CAUTION

Disconnect the power before moving or installing



the TV. Otherwise electric shock may occur. Remove the stand before installing the TV on a



wall mount by performing the stand attachment in reverse. If you install the TV on a ceiling or slanted wall,



it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty. Do not overtighten the screws as this may cause



damage to the TV and void your warranty. Use the screws and wall mounts that meet the



VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

ENGLISH

NOTE Use the screws that are listed on the VESA



standard screw specifications. The wall mount kit includes an installation



manual and necessary parts. The wall mount bracket is optional. You can



obtain additional accessories from your local dealer. The length of screws may differ depending upon



the wall mount. Make sure to use the proper length. For more information, refer to the manual



supplied with the wall mount. When using the wall mounting bracket, apply



the adhesive protective label to cover the unused stand opening(s). This will prevent the accumulation of dust and dirt. (Use only when provided with your particular model.)

Provided Item

NOTE If you record a TV program on a DVD recorder or



VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. The external device connections may differ from



the model. Connect external devices to the TV regardless of



the order of the TV port. If you connect a gaming device to the TV, use



the cable supplied with the gaming device. Refer to the external equipment’s manual for



operating instructions. In PC mode, there may be noise associated



with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. Depending upon the graphics card, some



resolution settings may not allow the image to be positioned on the screen properly.

ENGLISH

Adhesive Protective Label

When attaching a wall mounting bracket to the



TV, insert the wall mount inner spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Only when the item of the following form is provided)

Provided Item

Wall Mount Spacer

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The RF cable may not be supplied, depending upon the model.

CAUTION

Make sure not to bend the copper wire of the RF



cable.

Copper wire

Complete all connections between devices,



and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE To improve the picture quality in a poor signal



area, please purchase a signal amplifier and install properly. Use a signal splitter to use 2 TVs or more.



If the antenna is not installed properly, contact



your dealer for assistance. DTV Audio Supported Codec: MPEG, Dolby



digital, AAC, HE-AAC

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided.

Remote Control

(Depending upon model) The descriptions in this manual are based on the

buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

CAUTION

Do not mix old and new batteries,



as this may damage the remote control.

Type 1 Type 2

(POWER) Turns the TV on or off.

Toggles among Radio, TV, CATV, and

DTV.

Changes the input source. Accesses the quick settings.

Resizes an image.

Recalls your preferred subtitle in digital mode.

Number button Enters numbers.

Accesses the saved channel list.

and ends to the label

Alternates between the two last channels

selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program.

Mutes all sounds.

Scrolls through the saved channels. Moves to the previous or next page.

Type 1 Type 2

Shows the previous history.

(Home) Accesses the Home menu.

Shows the list of Apps.

Displays the program event according to time

scheduler.

Changes the picture mode.

Navigation Buttons Scrolls through menus or options. (up/down/left/right)

Selects menus or options and confirms your

input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

Soccer AV mode on or off.

Sets the length of time until the TV to turns off.

(Applicable only for the models supporting

the recording feature.) Returns to the LIVE TV. Control buttons (

SIMPLINK compatible devices (USB, SIMPLINK). Color buttons These access special functions in

some menus. (

, , , , ) Controls the

Red, Green, Yellow, Blue)

ENGLISH

CAUTION

Do not mix old and new batteries,



as this may damage the remote control.

Type 3

ENGLISH

(POWER) Turns the TV on or off.

Changes the input source. Accesses the quick settings.

Resizes an image.

Shows information on the current program.

Number button Enters numbers.

Accesses the saved channel list.

Alternates between the two last channels

selected (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Displays the program event according to time

scheduler.

Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next page.

Shows the previous history.

(Home) Accesses the Home menu.

Shows the list of Apps.

Navigation buttons Scrolls through menus or options. (up/down/left/right)

Selects menus or options and confirms your

input.

Returns to the previous screen.

Shows the list of Channels and Recordings.

Clears all on-screen displays and returns to TV

viewing.

Activates your preferred subtitle in digital

mode.

Returns to the LIVE TV.

Optimizes picture and audio settings for soccer.

Toggles between Radio, TV, CATV, and DTV.

Color buttons (

These access special functions in some menus. Control buttons (

SIMPLINK compatible devices (USB, SIMPLINK).

Starts to record and displays record menu.

Red, Green, Yellow, Blue)

, , , , ) Controls the

Magic Remote Functions

(Depending upon model) When the message

is low. Change the battery.

battery. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. Be sure to point the remote control at

Magic remote control battery

is displayed, replace the

and ends

the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

CAUTION

Do not mix old and new batteries,



as this may damage the remote control.

Adjusts the volume level. Displays the Screen Remote.

* Accesses the Universal Control Menu in some

regions.

* Pressing and holding the button will display a

menu to select an external device that is connected to the TV.

Used for viewing 3D video. (For 3D models)

(MUTE) Mutes all sounds.

Scrolls through the saved channels.

(POWER) Turns the TV on or off.

Navigation buttons (up/down/left/right)

Press the up, down, left or right button to scroll the menu. If you press pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.

(BACK) Returns to the previous screen.

(Home) Accesses the Home menu.

Wheel (OK) Press the center of the Wheel button

to select a menu. You can change channels by using the Wheel button.

(EXIT to LIVE) Switches among broadcast

(antenna) and various inputs.

(Voice recognition)

Network connection is required to use the voice recognition function.

1. Press the voice recognition button.

2. Speak when the voice display window appears on the TV screen.

* Use the Magic remote no further than 10 cm from

your face.

* The voice recognition may fail when you speak too

fast or too slowly.

* The recognition rate may vary depending upon

the user’s characteristics (voice, pronunciation, intonation, and speed) and the environment (noise and TV volume).

Color buttons These access special functions in some menus. ( Blue)

Red, Green, Yellow,

buttons while the

Registering Magic Remote

How to register the Magic Remote

To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote

and turn the TV on.

2 Point the Magic Remote at your TV

and press the Wheel (OK) on the

(Wheel)

How to deregister the Magic Remote

(BACK)

(Home)

remote control.

* If the TV fails to register the Magic

Remote, try again after turning the TV off and back on.

Press the (BACK) and (Home) at the same time, for five seconds, to unpair the Magic Remote with your TV. Pressing and holding the button will let you cancel and re-register Magic Remote at once.

(EXIT to LIVE)

ENGLISH

How to use Magic Remote

 Shake the Magic Remote slightly to the

right and left or press (Home), ,

buttons to make the pointer appear on the screen. (In some TV models, the pointer will appear when you turn the Wheel button.)

 If the pointer has not been used for a

certain period of time or Magic Remote is placed on a flat surface, then the pointer will disappear.

 If the pointer does not move as you

wish, shake Magic Remote to the left and right. The pointer will move to the center of the screen.

 The Magic Remote depletes batteries

faster than a normal remote due to the additional features.

Precautions to Take when Using the Magic Remote

Use the Magic remote within the maximum



communication distance (10 m). Using the remote control beyond this distance, or

ENGLISH

with an object obstructing it, may cause a communication failure. A communication failure may occur due to



nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic remote. The Magic remote may be damaged or may



malfunction if it is dropped or receives a heavy impact. Take care not to bump into nearby furniture or



other people when using the Magic remote. Manufacturer and installer cannot provide



service related to human safety as the applicable wireless device has possibility of electric wave interference. It is recommended that an Access Point (AP) be



located more than 1 m away from the TV. If the AP is installed closer than 1 m, the Magic remote may not perform as expected due to frequency interference.

Licenses

Supported licenses may differ by model. For more information about licenses, visit

(For LF6350, LF635T, LF6400, LF640T, LF6500, LF645T, LF6450, LF650T series)

www.lg.com.

(For LF595B, LF595D,

LF590T, LF5900, LF5950,

LF595T series)

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to

opensource@lge.com

(3) years from the date on which you purchased the product.

http://opensource.lge.com

. This offer is valid for three

Troubleshooting

Cannot control the TV with the remote control.



- Check the remote control sensor on the product and try again.

- Check if there is any obstacle between the product and the remote control.

- Check if the batteries are still working and properly installed (

No image display and no sound is produced.



to , to )

- Check if the product is turned on.

- Check if the power cord is connected to a wall outlet.

- Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.



- Check the power control settings. The power supply may be interrupted.

- Check if the Sleep Timer/Timer Power off is activated in the Timers settings.

- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Television System

(For LF595B, LF5900, LF5950, LF6350, LF6400, LF6450, LF6500 series) Analog NTSC - M, PAL - M/N Digital DVB - T

(For LF595D, LF590T, LF595T, LF635T, LF640T, LF645T, LF650T series) Analog NTSC - M, PAL - M/N Digital DVB - T, DVB - T2

Program Coverage

VHF 2 - 13, UHF 14 - 69, DTV 2 - 69, CATV 1 - 125

External Antenna Impedance

75 Ω

Environment condition

Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 %

Wireless Module Specifications

(For LF595B, LF595D, LF595T, LF5950, LF590T, LF5900 series)

Wireless LAN module (WN8122E1) specification Standard IEEE802.11a/b/g/n

Frequency Range

Output Power (Max.)

 Because band channel used by the country could

be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.

 This device should be installed and operated with

minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

 Contains FCC ID: BEJWN8122E1

Contains IC: 2703H-WN8122E1

(For LF6350, LF635T, LF645T, LF6450, LF6500, LF650T series)

Wireless module (LGSBW41) Specifications

Standard IEEE 802.11a/b/g/n Bluetooth Version 4.0

Frequency Range

Output Power (Max.)

 Because band channel used by the country could

be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.

 This device should be installed and operated with

minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

 Contains FCC ID: BEJLGSBW41

Contains IC: 2703H-LGSBW41

2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz

802.11a: 16.5 dBm

802.11b: 16 dBm

802.11g: 15.5 dBm

802.11n - 2.4 GHz: 15.5 dBm

802.11n - 5 GHz: 16.5 dBm

Wireless LAN Bluetooth

2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz

802.11a: 11.5 dBm

802.11b: 11 dBm

802.11g: 10.5 dBm

802.11n - 2.4 GHz: 11 dBm

802.11n - 5 GHz:

12.5 dBm

2400 to 2483.5 MHz

10 dBm or Lower

ENGLISH

The model and serial numbers of the TV are located on the back and one side of the TV. Record them below should you ever need service.

MODEL SERIAL

+ 36 hidden pages