LG 32LE3300-TA, 32LE4500-TA, 32LE4600-TA, 32LE5300-TA, 32LE5310-TC Service manual & schematics

INPUT

MENU

P

OK

/I

LED LCD TV

SERVICE MANUAL

CAUTION

BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CHASSIS : LB01D

MODEL : 32LE5300 32LE5300-TA

MODEL : 32LE5310

32LE5310-TC

North/Latin America http://aic.lgservice.com
Europe/Africa http://eic.lgservice.com
Asia/Oceania http://biz.lgservice.com

Internal Use Only

Printed in KoreaP/NO : MFL62865317 (1007-REV00)

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 2 -

CONTENTS

CONTENTS .............................................................................................. 2

PRODUCT SAFETY ................................................................................. 3

SPECIFICATION ....................................................................................... 6

ADJUSTMENT INSTRUCTION ................................................................ 8

BLOCK DIAGRAM.................................................................................. 14

EXPLODED VIEW .................................................................................. 15

SVC. SHEET ...............................................................................................

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 3 -

SAFETY PRECAUTIONS

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the
Schematic Diagram and Exploded View.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the
servicing of a receiver whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this
protects the technician from accidents resulting in personal injury
from electrical shocks.

It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitry that may be
inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown,
replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor,
over 1 W), keep the resistor 10 mm away from PCB.

Keep wires away from high voltage or high temperature parts.

Before returning the receiver to the customer,

always perform an AC leakage current check on the exposed
metallic parts of the cabinet, such as antennas, terminals, etc., to
be sure the set is safe to operate without damage of electrical
shock.

Leakage Current Cold Check(Antenna Cold Check)

With the instrument AC plug removed from AC source, connect an
electrical jumper across the two AC plug prongs. Place the AC
switch in the on position, connect one lead of ohm-meter to the AC
plug prongs tied together and touch other ohm-meter lead in turn to
each exposed metallic parts such as antenna terminals, phone
jacks, etc.
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1 MΩ and 5.2 MΩ.
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.

Leakage Current Hot Check (See below Figure)

Plug the AC cord directly into the AC outlet.

Do not use a line Isolation Transformer during this check.

Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Any voltage
measured must not exceed 0.75 volt RMS which is corresponds to

0.5 mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.

Leakage Current Hot Check circuit

1.5 Kohm/10W

To Instrument's
exposed
METALLIC PARTS

Good Earth Ground
such as WATER PIPE,
CONDUIT etc.

AC Volt-meter

When 25A is impressed between Earth and 2nd Ground
for 1 second, Resistance must be less than 0.1

*Base on Adjustment standard

IMPORTANT SAFETY NOTICE

0.15 uF

Ω

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 4 -

CAUTION: Before servicing receivers covered by this service
manual and its supplements and addenda, read and follow the

SAFETY PRECAUTIONS on page 3 of this publication.
NOTE: If unforeseen circumstances create conflict between the

following servicing precautions and any of the safety precautions on
page 3 of this publication, always follow the safety precautions.
Remember: Safety First.

General Servicing Precautions

1. Always unplug the receiver AC power cord from the AC power
source before;
a. Removing or reinstalling any component, circuit board

module or any other receiver assembly.

b. Disconnecting or reconnecting any receiver electrical plug or

other electrical connection.

c. Connecting a test substitute in parallel with an electrolytic

capacitor in the receiver.
CAUTION: A wrong part substitution or incorrect polarity
installation of electrolytic capacitors may result in an
explosion hazard.

2. Test high voltage only by measuring it with an appropriate high
voltage meter or other voltage measuring device (DVM,
FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".

3. Do not spray chemicals on or near this receiver or any of its
assemblies.

4. Unless specified otherwise in this service manual, clean
electrical contacts only by applying the following mixture to the
contacts with a pipe cleaner, cotton-tipped stick or comparable
non-abrasive applicator; 10 % (by volume) Acetone and 90 %
(by volume) isopropyl alcohol (90 % - 99 % strength)
CAUTION: This is a flammable mixture.
Unless specified otherwise in this service manual, lubrication of
contacts in not required.

5. Do not defeat any plug/socket B+ voltage interlocks with which
receivers covered by this service manual might be equipped.

6. Do not apply AC power to this instrument and/or any of its
electrical assemblies unless all solid-state device heat sinks are
correctly installed.

7. Always connect the test receiver ground lead to the receiver
chassis ground before connecting the test receiver positive
lead.
Always remove the test receiver ground lead last.

8. Use with this receiver only the test fixtures specified in this

service manual.

CAUTION: Do not connect the test fixture ground strap to any
heat sink in this receiver.

Electrostatically Sensitive (ES) Devices

Some semiconductor (solid-state) devices can be damaged easily
by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES
devices are integrated circuits and some field-effect transistors and
semiconductor "chip" components. The following techniques
should be used to help reduce the incidence of component
damage caused by static by static electricity.

1. Immediately before handling any semiconductor component or
semiconductor-equipped assembly, drain off any electrostatic
charge on your body by touching a known earth ground.
Alternatively, obtain and wear a commercially available
discharging wrist strap device, which should be removed to
prevent potential shock reasons prior to applying power to the
unit under test.

2. After removing an electrical assembly equipped with ES
devices, place the assembly on a conductive surface such as
aluminum foil, to prevent electrostatic charge buildup or
exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES
devices.

4. Use only an anti-static type solder removal device. Some solder
removal devices not classified as "anti-static" can generate
electrical charges sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate
electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective
package until immediately before you are ready to install it.
(Most replacement ES devices are packaged with leads
electrically shorted together by conductive foam, aluminum foil
or comparable conductive material).

7. Immediately before removing the protective material from the
leads of a replacement ES device, touch the protective material
to the chassis or circuit assembly into which the device will be
installed.
CAUTION: Be sure no power is applied to the chassis or circuit,
and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged
replacement ES devices. (Otherwise harmless motion such as
the brushing together of your clothes fabric or the lifting of your
foot from a carpeted floor can generate static electricity
sufficient to damage an ES device.)

General Soldering Guidelines

1. Use a grounded-tip, low-wattage soldering iron and appropriate
tip size and shape that will maintain tip temperature within the
range or 500

°

F to 600 °F.

2. Use an appropriate gauge of RMA resin-core solder composed
of 60 parts tin/40 parts lead.

3. Keep the soldering iron tip clean and well tinned.

4. Thoroughly clean the surfaces to be soldered. Use a mall wire­bristle (0.5 inch, or 1.25 cm) brush with a metal handle.
Do not use freon-propelled spray-on cleaners.

5. Use the following unsoldering technique
a. Allow the soldering iron tip to reach normal temperature.

(500

°F to 600 °F)

b. Heat the component lead until the solder melts.
c. Quickly draw the melted solder with an anti-static, suction-

type solder removal device or with solder braid.
CAUTION: Work quickly to avoid overheating the circuit
board printed foil.

6. Use the following soldering technique.
a. Allow the soldering iron tip to reach a normal temperature

(500

°F to 600 °F)

b. First, hold the soldering iron tip and solder the strand against

the component lead until the solder melts.

c. Quickly move the soldering iron tip to the junction of the

component lead and the printed circuit foil, and hold it there
only until the solder flows onto and around both the
component lead and the foil.
CAUTION: Work quickly to avoid overheating the circuit
board printed foil.

d. Closely inspect the solder area and remove any excess or

splashed solder with a small wire-bristle brush.

SERVICING PRECAUTIONS

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 5 -

IC Remove/Replacement

Some chassis circuit boards have slotted holes (oblong) through
which the IC leads are inserted and then bent flat against the
circuit foil. When holes are the slotted type, the following technique
should be used to remove and replace the IC. When working with
boards using the familiar round hole, use the standard technique
as outlined in paragraphs 5 and 6 above.

Removal

1. Desolder and straighten each IC lead in one operation by gently
prying up on the lead with the soldering iron tip as the solder
melts.

2. Draw away the melted solder with an anti-static suction-type
solder removal device (or with solder braid) before removing the
IC.

Replacement

1. Carefully insert the replacement IC in the circuit board.

2. Carefully bend each IC lead against the circuit foil pad and
solder it.

3. Clean the soldered areas with a small wire-bristle brush.
(It is not necessary to reapply acrylic coating to the areas).

"Small-Signal" Discrete Transistor
Removal/Replacement

1. Remove the defective transistor by clipping its leads as close as
possible to the component body.

2. Bend into a "U" shape the end of each of three leads remaining
on the circuit board.

3. Bend into a "U" shape the replacement transistor leads.

4. Connect the replacement transistor leads to the corresponding
leads extending from the circuit board and crimp the "U" with
long nose pliers to insure metal to metal contact then solder
each connection.

Power Output, Transistor Device
Removal/Replacement

1. Heat and remove all solder from around the transistor leads.

2. Remove the heat sink mounting screw (if so equipped).

3. Carefully remove the transistor from the heat sink of the circuit
board.

4. Insert new transistor in the circuit board.

5. Solder each transistor lead, and clip off excess lead.

6. Replace heat sink.

Diode Removal/Replacement

1. Remove defective diode by clipping its leads as close as
possible to diode body.

2. Bend the two remaining leads perpendicular y to the circuit
board.

3. Observing diode polarity, wrap each lead of the new diode
around the corresponding lead on the circuit board.

4. Securely crimp each connection and solder it.

5. Inspect (on the circuit board copper side) the solder joints of
the two "original" leads. If they are not shiny, reheat them and if
necessary, apply additional solder.

Fuse and Conventional Resistor

Removal/Replacement

1. Clip each fuse or resistor lead at top of the circuit board hollow
stake.

2. Securely crimp the leads of replacement component around
notch at stake top.

3. Solder the connections.
CAUTION: Maintain original spacing between the replaced
component and adjacent components and the circuit board to
prevent excessive component temperatures.

Circuit Board Foil Repair

Excessive heat applied to the copper foil of any printed circuit
board will weaken the adhesive that bonds the foil to the circuit
board causing the foil to separate from or "lift-off" the board. The
following guidelines and procedures should be followed whenever
this condition is encountered.

At IC Connections

To repair a defective copper pattern at IC connections use the
following procedure to install a jumper wire on the copper pattern
side of the circuit board. (Use this technique only on IC
connections).

1. Carefully remove the damaged copper pattern with a sharp
knife. (Remove only as much copper as absolutely necessary).

2. carefully scratch away the solder resist and acrylic coating (if
used) from the end of the remaining copper pattern.

3. Bend a small "U" in one end of a small gauge jumper wire and
carefully crimp it around the IC pin. Solder the IC connection.

4. Route the jumper wire along the path of the out-away copper
pattern and let it overlap the previously scraped end of the good
copper pattern. Solder the overlapped area and clip off any
excess jumper wire.

At Other Connections

Use the following technique to repair the defective copper pattern
at connections other than IC Pins. This technique involves the
installation of a jumper wire on the component side of the circuit
board.

1. Remove the defective copper pattern with a sharp knife.
Remove at least 1/4 inch of copper, to ensure that a hazardous
condition will not exist if the jumper wire opens.

2. Trace along the copper pattern from both sides of the pattern
break and locate the nearest component that is directly
connected to the affected copper pattern.

3. Connect insulated 20-gauge jumper wire from the lead of the
nearest component on one side of the pattern break to the lead
of the nearest component on the other side.
Carefully crimp and solder the connections.
CAUTION: Be sure the insulated jumper wire is dressed so the
it does not touch components or sharp edges.

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 6 -

SPECIFICATION

NOTE : Specifications and others are subject to change without notice for improvement

.

1. Application range

This specification is applied to the LCD TV used LB01D
chassis.

2. Requirement for Test

Each part is tested as below without special appointment.

1) Temperature: 25 ºC ± 5 ºC(77 ºF ± 9 ºF), CST: 40 ºC ± 5 ºC

2) Relative Humidity : 65 % ± 10 %

3) Power Voltage
: Standard input voltage (AC 100-240 V~ 50 / 60 Hz)
* Standard Voltage of each products is marked by models.

4) Specification and performance of each parts are followed

each drawing and specification by part number in
accordance with BOM.

5) The receiver must be operated for about 5 minutes prior to

the adjustment.

3. Test method

1) Performance: LGE TV test method followed

2) Demanded other specification

- Safety: CE, IEC specification

- EMC:CE, IEC

4. Component Video Input (Y, C

B

/PB, CR

/PR)

No.

Specification

Remark

Resolution H-freq(kHz) V-freq(Hz)

1. 720x480 15.73 60.00 SDTV,DVD 480i

2. 720x480 15.63 59.94 SDTV,DVD 480i

3. 720x480 31.47 59.94 480p

4. 720x480 31.50 60.00 480p

5. 720x576 15.625 50.00 SDTV,DVD 625 Line

6. 720x576 31.25 50.00 HDTV 576p

7. 1280x720 45.00 50.00 HDTV 720p

8. 1280x720 44.96 59.94 HDTV 720p

9. 1280x720 45.00 60.00 HDTV 720p

10. 1920x1080 31.25 50.00 HDTV 1080i

11. 1920x1080 33.75 60.00 HDTV 1080i

12. 1920x1080 33.72 59.94 HDTV 1080i

13. 1920x1080 56.250 50 HDTV 1080p

14. 1920x1080 67.5 60 HDTV 1080p

- 7 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

No.

Specification

Proposed Remark

Resolution H-freq(kHz) V-freq(Hz) Pixel Clock(MHz)

1. 720*400 31.468 70.08 28.321 For only DOS mode

2. 640*480 31.469 59.94 25.17 VESA Input 848*480 60 Hz, 852*480 60 Hz

-> 640*480 60 Hz Display

3. 800*600 37.879 60.31 40.00 VESA

4. 1024*768 48.363 60.00 65.00 VESA(XGA)

5. 1280*768 47.78 59.87 79.5 WXGA

6. 1360*768 47.72 59.8 84.75 WXGA

7. 1280*1024 63.981 60.02 108.875 SXGA FHD Model

8. 1920*1080 66.587 59.93 138.625 WUXGA FHD model

5. RGB (PC)

7. HDMI Input

(1) DTV Mode

No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark

1. 720*400 31.468 70.08 28.321 HDCP

2. 640*480 31.469 59.94 25.17 VESA HDCP

3. 800*600 37.879 60.31 40.00 VESA HDCP

4. 1024*768 48.363 60.00 65.00 VESA(XGA) HDCP

5. 1280*768 47.78 59.87 79.5 WXGA HDCP

6. 1360*768 47.72 59.8 84.75 WXGA HDCP

7. 1280*1024 63.981 60.02 108.875 SXGA HDCP/FHD model

8. 1920*1080 67.5 60.00 138.625 WUXGA HDCP/FHD model

(2) PC Mode

No. Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark

1. 720*480 31.469 /31.5 59.94 /60 27.00/27.03 SDTV 480P

2. 720*576 31.25 50 54 SDTV 576P

3. 1280*720 37.500 50 74.25 HDTV 720P

4. 1280*720 44.96 /45 59.94 /60 74.17/74.25 HDTV 720P

5. 1920*1080 33.72 /33.75 59.94 /60 74.17/74.25 HDTV 1080I

6. 1920*1080 28.125 50.00 74.25 HDTV 1080I

7. 1920*1080 26.97 /27 23.97 /24 74.17/74.25 HDTV 1080P

8. 1920*1080 33.716 /33.75 29.976 /30.00 74.25 HDTV 1080P

9. 1920*1080 56.250 50 148.5 HDTV 1080P

10. 1920*1080 67.43 /67.5 59.94 /60 148.35/148.50 HDTV 1080P

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 8 -

ADJUSTMENT INSTRUCTION

1. Application Range

This specification sheet is applied to all of the LCD TV with
LB01D chassis.

2. Designation

1) The adjustment is according to the order which is designated

and which must be followed, according to the plan which can
be changed only on agreeing.

2) Power Adjustment: Free Voltage

3) Magnetic Field Condition: Nil.

4) Input signal Unit: Product Specification Standard

5) Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25 ºC ± 5 ºC
Relative humidity : 65 % ± 10 %
Input voltage : 220 V, 60 Hz

6) Adjustment equipments: Color Analyzer(CA-210 or CA-110),

DDC Adjustment Jig equipment, Service remote control.

7) Push the “IN STOP” key - For memory initialization.

3. Main PCB check process

* APC - After Manual-Insult, executing APC

* Boot file Download

1) Execute ISP program “Mstar ISP Utility” and then click

“Config” tab.

2) Set as below, and then click “Auto Detect” and check “OK”

message.

If “Error” is displayed, Check connection between
computer, jig, and set.

3) Click “Read” tab, and then load download file (XXXX.bin)

by clicking “Read”.

4) Click “Connect” tab. If “Can’t” is displayed, check

connection between computer, jig, and set.

5) Click “Auto” tab and set as below.

6) Click “Run”.

7) After downloading, check “OK” message.

* USB DOWNLOAD

1) Put the USB Stick to the USB socket.

2) Automatically detecting update file in USB Stick

- If your downloaded program version in USB Stick is Low,
it didn’t work. But your downloaded version is High, USB
data is automatically detecting.

3) Show the message “Copying files from memory”.

filexxx.bin

(4)

(7) ……….OK

(5)

(6)

(1)

fil exxx.bi n

(2)

(3)

Please Check the Speed :
To use speed between
from 200KHz to 400KHz

Case1 : Software version up

1. After downloading S/W by USB, TV set will reboot
automatically

2. Push “In-stop” key

3. Push “Power on” key

4. Function inspection

5. After function inspection, Push “In-stop” key.

Case2 : Function check at the assembly line

1. When TV set is entering on the assembly line, Push
“In-stop” key at first.

2. Push “Power on” key for turning it on.

-> If you push “Power on” key, TV set will recover
channel information by itself.

3. After function inspection, Push “In-stop” key.

4) Updating is staring.

5) Uploading completed, The TV will restart automatically.

6) If your TV is turned on, check your updated version and
Tool option.(explain the Tool option, next stage)

* If downloading version is more high than your TV have,

TV can lost all channel data. In this case, you have to
channel recover. if all channel data is cleared, you didn’t
have a DTV/ATV test on production line.

* After downloading, have to adjust Tool Option again.

1) Push "IN-START" key in service remote control.

2) Select “Tool Option 1” and Push “OK” button.

3) Punch in the number. (Each model has their number)

4) Completed selecting Tool option.

3.1. ADC Process

(1) ADC

- Enter Service Mode by pushing “ADJ” key,

- Enter Internal ADC mode by pushing “

G

” key at “5. ADC

Calibration”

<Caution> Using ‘power on’ button of the Adjustment R/C,

power on TV.

* ADC Calibration Protocol (RS232)

Adjust Sequence

• aa 00 00 [Enter Adjust Mode]

• xb 00 40 [Component1 Input (480i)]

• ad 00 10 [Adjust 480i Comp1]

• xb 00 60 [RGB Input (1024*768)]

• ad 00 10 [Adjust 1024*768 RGB]

• aa 00 90 End Adjust mode
* Required equipment : Adjustment R/C.

3.2. Function Check

* Check display and sound

- Check Input and Signal items. (cf. work instructions)

1) TV

2) AV (SCART1/SCART2/ CVBS)

3) COMPONENT (480i)

4) RGB (PC : 1024 x 768 @ 60 Hz)

5) HDMI

6) PC Audio In
* Display and Sound check is executed by Remote control.

- 9 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

No Item CMD1 CMD2 Data0

Enter Adjust Adjust A A 0 0 When transfer the ‘Mode In’,

Mode ‘Mode In’ Carry the command.

ADC adjust ADC Adjust A D 1 0 Automatically adjustment

(The use of a internal pattern)

4. Total Assembly line process

4.1. Adjustment Preparation

· W/B Equipment condition

CA210 : CH 9, Test signal : Inner pattern (85IRE)

· Above 5 minutes H/run in the inner pattern. (“power on” key

of adjust remote control)

· Edge LED W/B Table is process of time(Only LGD)

CA210 : CH 14, Test signal : Inner pattern (85 IRE)

* Connecting picture of the measuring instrument

(On Automatic control)

Inside PATTERN is used when W/B is controlled. Connect to
auto controller or push Adjustment R/C POWER ON ->
Enter the mode of White-Balance, the pattern will come out.

* Auto-control interface and directions

1) Adjust in the place where the influx of light like floodlight
around is blocked. (illumination is less than 10 lux).

2) Adhere closely the Color Analyzer (CA210) to the module
less than 10 cm distance, keep it with the surface of the
Module and Color Analyzer’s prove vertically.(80° ~ 100°).

3) Aging time

- After aging start, keep the power on (no suspension of
power supply) and heat-run over 5 minutes.

- Using ‘no signal’ or ‘full white pattern’ or the others,
check the back light on.

• Auto adjustment Map(RS-232C)
RS-232C COMMAND
[CMD ID DATA]

Wb 00 00 White Balance Start
Wb 00 ff White Balance End

<Caution>

Color Temperature : COOL, Medium, Warm.
One of R Gain/G Gain/ B Gain should be kept on 0xC0, and
adjust other two lower than C0.
(when R/G/B Gain are all C0, it is the FULL Dynamic Range
of Module)

* Manual W/B process using adjusts Remote control.

• After enter Service Mode by pushing “ADJ” key,

• Enter White Balance by pushing “

G” key at “6. White

Balance”.

* After done all adjustments, Press “In-start” button and

compare Tool option and Area option value with its BOM, if
it is correctly same then unplug the AC cable. If it is not
same, then correct it same with BOM and unplug AC cable.
For correct it to the model’s module from factory Jig model.

* Push the “IN STOP” key after completing the function

inspection.

And Mechanical Power Switch must be set “ON”.

4.2. DDC EDID Write (RGB 128Byte )

• Connect D-sub Signal Cable to D-sub Jack.

• Write EDID Data to EEPROM(24C02) by using DDC2B
protocol.

• Check whether written EDID data is correct or not.

* For SVC main Assembly, EDID have to be downloaded to

Insert Process in advance.

4.3. DDC EDID Write (HDMI 256Byte)

• Connect HDMI Signal Cable to HDMI Jack.

• Write EDID data to EEPROM(24C02) by using DDC2B protocol.

• Check whether written EDID data is correct or not.

* For SVC main Assembly, EDID have to be downloaded to

Insert Process in advance.

4.4. EDID DATA

1) All Data : HEXA Value

2) Changeable Data :

*: Serial No : Controlled / Data:01
**: Month : Controlled / Data:00
***:Year : Controlled
****:Check sum

- 10 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

Cool 13,000 K X=0.269(±0.002)

Y=0.273(±0.002) <Test Signal>

Medium 9,300 K X=0.285(±0.002) Inner pattern

Y=0.293(±0.002) (216 gray,85 IRE)

Warm 6,500 K X=0.313(±0.002)

Y=0.329(±0.002)

Full White Pattern

COLOR
ANALYZER
TYPE: CA-210

RS-232C Communication

CA-210

RS-232C COMMAND MIN CENTER MAX

[CMD ID DATA] (DEFAULT)

Cool Mid Warm Cool Mid Warm

R Gain jg Ja jd 00 172 192 192 192

G Gain jh Jb je 00 172 192 192 192

B Gain ji Jc jf 00 192 192 172 192

R Cut 64 64 64 128

G Cut 64 64 64 128

B Cut 64 64 64 128

Time Cool Medium Warm

XYXYXY

0-2 Minute 276 285 292 305 315 334

3-5 Minute 274 282 290 302 313 332

Color 6-9 Minute 273 280 289 300 312 330

Temperature 10-19 Minute 272 278 288 298 311 328

20-35 Minute 271 276 287 296 310 326

36-49 Minute 269 274 286 294 309 324

50-79 Minute 269 273 286 293 308 323

More than 80 Minute 269 273 285 293 308 323

4.5. Auto Download

1) Press Adj. key on the Adj. Remote control.

2) Select EDID D/L menu.

3) By pressing Enter key, EDID download will begin

4) If Download is successful, OK is display, but If Download if
failure, NG is displayed.

5) If Download is failure, Re-try downloads.

* Edid data and Model option download (RS232)

- Manual Download

* Caution

1) Use the proper signal cable for EDID Download

- Analog EDID : Pin3 exists

- Digital EDID : Pin3 exists

2) Never connect HDMI & D-sub Cable at the same time.

3) Use the proper cables below for EDID Writing

4) Download HDMI1, HDMI2, separately because HDMI1 is
different from HDMI2

1) FHD RGB EDID data

2) FHD HDMI EDID data

* Detail EDID Options are below

ⓐ Product ID

ⓑ Serial No: Controlled on production line.
ⓒ Month, Year: Controlled on production line:

ex) Monthly : ‘02’ -> ‘01’

Year : ‘2010’ -> ‘14’

ⓓ Model Name(Hex):

ⓔ Checksum: Changeable by total EDID data.
ⓕ Vendor Specific(HDMI)

Model Name HEX EDID Table DDC Function

FHD Model 0000 01 00 Analog/Digital

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

- 11 -

MODEL MODEL NAME(HEX)

all 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20

Item

Manufacturer ID

Version

Revision

Condition

GSM

Digital : 1

Digital : 3

Data(Hex)

1E6D

01

03

D-sub to D-sub DVI-D to HDMI or HDMI to HDMI

For HDMI EDIDFor Analog EDID

NO Item CMD1 CMD2 Data0

Enter Download A A 0 0 When transfer the ‘Mode In’,

download Mode ‘Mode In’ Carry the command.

EDID data Download A E 00 10 Automatically Download

and Model (The use of a internal pattern)

option download

012 3 4 5 67 8 9 ABCD EF

00 00 FF FF FF FF FF FF 00 1E 6D a b

10 c 01036810 09780AEE91A3544C9926

20 0F 50 54 A1 08 00 81 80 61 40 45 40 31 40 01 01

30 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C

40 45 00 A0 5A 00 00 00 1E 01 1D 00 72 51 D0 1E 20

50 6E 28 55 00 A0 5A 00 00 00 1E 00 00 00 FD 00 3A

60 3E 1E 53 10 00 0A 20 20 20 20 20 20 d

70 d 00 e

80 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

90 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

012 3 4 5 67 8 9 ABCD EF

00 00 FF FF FF FF FF FF 00 1E 6D a b

10 c 01 03 80 10 09 78 0A EE 91 A3 54 4C 99 26

20 0F 50 54 A1 08 00 71 4F 81 01 01 01 01 01 01 01

30 01 01 01 01 01 01 02 3A 80 18 71 38 2D 40 58 2C

40 45 00 A0 5A 00 00 00 1E 01 1D 00 72 51 D0 1E 20

50 6E 28 55 00 A0 5A 00 00 00 1E 00 00 00 FD 00 3A

60 3E 1E 53 10 00 0A 20 20 20 20 20 20 d

70 d 01 e

80 02 03 26 F1 4E 10 1F 84 13 05 14 03 02 12 20 21

90 22 15 01 26 15 07 50 09 57 07 f

A0 f E3050301011D8018711C1620 582C

B0 25 00 A0 5A 00 00 00 9E 01 1D 00 80 51 D0 0C 20

C0 40 80 35 00 A0 5A 00 00 00 1E 02 3A 80 18 71 38

D0 2D 40 58 2C 45 00 A0 5A 00 00 00 1E 66 21 50 B0

E0 51 00 1B 30 40 70 36 00 A0 5A 00 00 00 1E 00 00

F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F9

INPUT MODEL NAME(HEX)

HDMI1 67030C001000B82D

HDMI2 67030C002000B82D

HDMI3 67030C003000B82D

HDMI4 67030C004000B82D

- 12 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

4.5. V-COM Adjust(Only LGD(M+S) Module)

- Why need Vcom adjustment?

A The Vcom (Common Voltage) is a Reference Voltage of

Liquid Crystal Driving.

-> Liquid Crystal need for Polarity Change with every frame.

- Adjust sequence

· Press the PIP key of th ADJ remote control.(This PIP key is

hot key to enter the VCOM adjusting mode)

(Or After enter Service Mode by pushing “ADJ” key, then
Enter V-Com Adjust mode by pushing “

G” key at “10. V-

Com”

· As pushing the right or the left key on the remote control,

and find the V-COM value which is no or minimized the
Flicker. (If there is no flicker at default value, Press the exit
key and finish the VCOM adjustment.)

· Push the “OK” key to store value. Then the message

“Saving OK” is pop.

· Press the exit key to finish VCOM adjustment.

(Visual Adjust and control the Voltage level)

4.6. Outgoing condition Configuration

- When pressing IN-STOP key by SVC remocon, Red LED are
blinked alternatively. And then Automatically turn off.

(Must not AC power OFF during blinking)

4.7. Internal pressure

Confirm whether is normal or not when between power
board’s ac block and GND is impacted on 1.5 kV(dc) or 2.2
kV(dc) for one second.

5. Model name & Serial number D/L

• Press “Power on” key of service remocon.
(Baud rate : 115200 bps)

• Connect RS232 Signal Cable to RS-232 Jack.

• Write Serial number by use RS-232.

• Must check the serial number at the Diagnostics of SET UP
menu. (Refer to below).

5.1. Signal TABLE

CMD : A0h
LENGTH : 85~94h (1~16 bytes)
ADH : EEPROM Sub Address high (00~1F)
ADL : EEPROM Sub Address low (00~FF)
Data : Write data
CS : CMD + LENGTH + ADH + ADL + Data_1 +…+ Data_n
Delay : 20ms

5.2. Command Set

* Description

FOS Default write : <7mode data> write
Vtotal, V_Frequency, Sync_Polarity, Htotal, Hstart, Vstart, 0,
Phase
Data write : Model Name and Serial Number write in

EEPROM,.

5.3. Method & notice

A. Serial number D/L is using of scan equipment.
B. Setting of scan equipment operated by Manufacturing

Technology Group.

C. Serial number D/L must be conformed when it is produced

in production line, because serial number D/L is mandatory
by D-book 4.0.

* Manual Download (Model Name and Serial Number)

If the TV set is downloaded by OTA or Service man, sometimes
model name or serial number is initialized.(Not always)
There is impossible to download by bar code scan, so It need
Manual download.

1) Press the ‘instart’ key of ADJ remote controller.

2) Go to the menu ‘5.Model Number D/L’ like below photo.

3) Input the Factory model name(ex 42LD450-ZA) or Serial

number like photo.

CMD LENGTH ADH ADL DATA_1 . . . Data_n CS DELAY

No. Adjust mode CMD(hex) LENGTH(hex

)

Description

1

EEPROM WRITE

A0h

84h+n

n-bytes Write (n = 1~16)

Row Li ne

Column Li ne

CLC

CST

Pane l

S

Y

S

T

E

M

Gat e Driv e IC

So urce D r iv e I C

Circuit Block

Tim i ng
Cont r o ll er

Po w er
Blo c k

V

COM

Gamma
Ref er ence V oltage

Gamm a Re ference
Volta ge

Data (R,G ,B) & C on tro l signal

Cont rol si gnal

Data (R,G,B ) &
Cont rol si gnal

In t er fa ce

TFT

Po w er I np u t

Power Input

Da ta I n pu t

Da ta I n pu t

V

COM

Liquid
Crys tal

V

COM

4) Check the model name Instart menu -> Factory name
displayed (ex 42LD450-ZA)

5) Check the Diagnostics (DTV country only) -> Buyer model
displayed (ex 42LD450)

6. CI+ key download(Only for CI model)

6-1. Download Procedure

(1) Press "Power on" button of a service R/C.(Baud rate :

115200 bps)
(2) Connect RS232-C Signal Cable.
(3) Write CI+ Key through RS-232-C.
(4) Check whether the key was downloaded or not at ‘In Start’

menu. (Refer to below).

=> Check the Download to CI+ Key value in LGset.

6-2. check the method of CI+ Key value

(1) Check the method on Instart menu

(2) check the method of RS232C Command

1) into the main ass’y mode (RS232 : aa 00 00)

2) check the key download for transmitted command
(RS232 : ci 00 10)

3) result value

- normally status for download : OKx

- abnormally status for download : NGx

6-3. Check the method of CI+ key value (RS232)

(1) into the main ass’y mode (RS232 : aa 00 00)

(2) Check the method of CI+ key by command

(RS232 : ci 00 20)

(3) Result value

i 01 OK 1d1852d21c1ed5dcx

- 13 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

CMD 1 CMD 2 Data 0

AA00

CMD 1 CMD 2 Data 0

CI10

CMD 1 CMD 2 Data 0

AA00

CMD 1 CMD 2 Data 0

CI20

CI+ key Value

- 14 -

LGE Internal Use OnlyCopyright © 2010 LG Electronics. Inc. All rights reserved.

Only for training and service purposes

BLOCK DIAGRAM

- 15 -

LGE Internal Use OnlyCopyright LG Electronics. Inc. All rights reserved.

Only for training and service purposes

300

200

530

801

800

540

521

802

400

880

710

810

830

120

LV1

500

A2

A5

A10

A21

A9

920

900

910

EXPLODED VIEW

Many electrical and mechanical parts in this chassis have special safety-related characteristics. These
parts are identified by in the Schematic Diagram and EXPLODED VIEW.
It is essential that these special safety parts should be replaced with the same components as
recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards.
Do not modify the original design without permission of manufacturer.

IMPORTANT SAFETY NOTICE

NC_1

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

NC_2

NC_3

NC_4

NC_5

NC_6

NC_7

NC_8

VCC_1

VSS_1

NC_9

NC_10

NC_11

NC_12

NC_13

NC_14

NC_15

/PF_WP

R/B

RE

CE

CLE

ALE

WE

WP

NAND FLASH MEMORY

+3.5V_ST

R101

IC102-*1

HY27US08121B-TPCB

512MBIT

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

/PF_CE0
H : Serial Flash
L : NAND Flash
/PF_CE1
H : 16 bit
L : 8 bit

/F_RB

/PF_OE

/PF_CE0

+3.3V_Normal

10K

OPT

R104

R103

0

OPT

3.3K
B

3.3K

R102

48

47

46

45

44

43

42

41

40

39

38

37

36

35

34

33

32

31

30

29

28

27

26

25

/PF_CE1

C

Q101
KRC103S

E

NC_28

NC_27

NC_26

NC_25

I/O7

I/O6

I/O5

I/O4

NC_24

NC_23

PRE

VCC_2

VSS_2

NC_22

NC_21

NC_20

I/O3

I/O2

I/O1

I/O0

NC_19

NC_18

NC_17

NC_16

PF_ALE

/PF_WE

OPT

R105
1K

OPT

R106

VDD_1

VSS_1

NC_10

NC_11

NC_12

NC_13

NC_14

NC_15

1K

NC_1

NC_2

NC_3

NC_4

NC_5

NC_6

NC_7

NC_8

NC_9

1K

R107

R1081K

RB

R

E

CL

AL

W

WP

R109 3.9K

C101

OPT

0.1uF

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

+3.3V_Normal

NC_1

NC_2

NC_3

NC_4

NC_5

NC_6

R/B

NC_7

NC_8

VCC_1

VSS_1

NC_9

NC_10

CLE

ALE

NC_11

NC_12

NC_13

NC_14

NC_15

IC102-*2

NAND01GW3B2CN6E

1GBIT

1

2

3

4

5

6

7

RE

8

CE

9

10

11

12

13

14

15

16

17

WE

18

WP

19

20

21

22

23

24

IC102

HY27UF082G2B-TPCB

2GBIT

NC_29

48

NC_28

47

NC_27

46

NC_26

45

I/O7

44

I/O6

43

I/O5

42

I/O4

41

NC_25

40

NC_24

39

NC_23

38

VDD_2

37

VSS_2

36

NC_22

35

NC_21

34

NC_20

33

I/O3

32

I/O2

31

I/O1

30

I/O0

29

NC_19

28

NC_18

27

NC_17

26

NC_16

25

+3.3V_Normal

NC_29

48

NC_28

47

NC_27

46

NC_26

45

I/O7

44

I/O6

43

I/O5

42

I/O4

41

NC_25

40

NC_24

39

NC_23

38

VCC_2

37

VSS_2

36

NC_22

35

NC_21

34

NC_20

33

I/O3

32

I/O2

31

I/O1

30

I/O0

29

NC_19

28

NC_18

27

NC_17

26

NC_16

25

S7M_NON_DIVX & MS10

IC101-*2

LGE107 (S7M Non Divx/RM)

AE1

FRC_DDR3_A0/DDR2_NC

AF16

FRC_DDR3_A1/DDR2_A6

AF1

FRC_DDR3_A2/DDR2_A7

AE3

FRC_DDR3_A3/DDR2_A1

AD14

FRC_DDR3_A4/DDR2_CASZ

AD3

FRC_DDR3_A5/DDR2_A10

AF15

FRC_DDR3_A6/DDR2_A0

AF2

FRC_DDR3_A7/DDR2_A5

AE15

FRC_DDR3_A8/DDR2_A2

AD2

FRC_DDR3_A9/DDR2_A9

AD16

FRC_DDR3_A10/DDR2_A11

AD15

FRC_DDR3_A11/DDR2_A4

AE16

FRC_DDR3_A12/DDR2_A8

BCKP/TCON13/GREEN[1]
BCKM/TCON12/GREEN[0]

AF3

FRC_DDR3_BA0/DDR2_BA2

AF14

FRC_DDR3_BA1/DDR2_ODT

AD1

FRC_DDR3_BA2/DDR2_A12

AD13

FRC_DDR3_MCLK/DDR2_MCLK

AE14

FRC_DDR3_CKE/DDR2_RASZ

AE13

FRC_DDR3_MCLKZ/DDR2_MCLKZ

AE4

FRC_DDR3_ODT/DDR2_BA1

AD5

FRC_DDR3_RASZ/DDR2_WEZ

AF4

FRC_DDR3_CASZ/DDR2_CKE

AD4

FRC_DDR3_WEZ/DDR2_BA0

AE2

FRC_DDR3_RESETB/DDR2_A3

AF8

FRC_DDR3_DQSL/DDR2_DQS0

AD9

FRC_DDR3_DQSLB/DDR2_DQSB0

AE9

FRC_DDR3_DQSU/DDR2_DQS1

AF9

FRC_DDR3_DQSUB/DDR2_DQSB1

AE11

FRC_DDR3_DML/DDR2_DQ7

AF6

FRC_DDR3_DMU/DDR2_DQ11

AE6

FRC_DDR3_DQL0/DDR2_DQ6

AF11

FRC_DDR3_DQL1/DDR2_DQ0

AD6

FRC_DDR3_DQL2/DDR2_DQ1

AD12

FRC_DDR3_DQL3/DDR2_DQ2

AE5

FRC_DDR3_DQL4/DDR2_DQ4

AF12

FRC_DDR3_DQL5/DDR2_NC

AF5

FRC_DDR3_DQL6/DDR2_DQ3

AE12

FRC_DDR3_DQL7/DDR2_DQ5

AE10

FRC_DDR3_DQU0/DDR2_DQ8

AF7

FRC_DDR3_DQU1/DDR2_DQ14

AD11

FRC_DDR3_DQU2/DDR2_DQ13

AD7

FRC_DDR3_DQU3/DDR2_DQ12

AD10

GPIO0/TCON15/HSYNC/VDD_ODD

FRC_DDR3_DQU4/DDR2_DQ15

AE7

GPIO1/TCON14/VSYNC/VDD_EVEN

FRC_DDR3_DQU5/DDR2_DQ9

AF10

GPIO2/TCON7/LDE/GCLK4

FRC_DDR3_DQU6/DDR2_DQ10

AD8

GPIO3/TCON6/LCK/GCLK2

FRC_DDR3_DQU7/DDR2_DQM1

AE8

FRC_DDR3_NC/DDR2_DQM0

Y11

FRC_REXT

Y19

FRC_TESTPIN

<T3 CHIP Config(AUD_LRCH)>

Boot from SPI flash : 1’b0
Boot from NOR flash : 1’b1

<T3 CHIP Config>
(AUD_SCK, AUD_MASTER_CLK, PWM1, PWM0)

MIPS_no_EJ_NOR8 : 4’h3 (MIPS as host. No EJ PAD. Byte mode NAND flash.)
MIPS_EJ1_NOR8 : 4’h4 (MIPS as host. EJ use PAD1. Byte mode NAND flash.)
MIPS_EJ2_NOR8 : 4’h5 (MIPS as host. EJ use PAD2. Byte mode NAND flash.)
B51_Secure_no scramble : 4’hb (8051 as host. Internal SPI flash secure boot, no scramble)
B51_Sesure_scramble : 4’hc (8051 as host. Internal SPI flash secure boot with scarmble)

C102

10uF

C103

0.1uF

AR101

22

PCM_A[0-7]

PCM_A[7]

PCM_A[6]

PCM_A[5]

PCM_A[4]

R115

AR102

PCM_A[3]

PCM_A[2]

PCM_A[1]

PCM_A[0]

22

R116

& MS10 :Region that support MS10(ex:DTV Country)
& DD :Region that support only Dolby Digital(ex:AISA Analog/KOREA)

S7T_DIVX & DD

IC101-*5

LGE105DB-LF-1 (S7-Tcon Divx_ Non_RM/MS10)

W26

AE1
RLV3P
RLV3N
RLV0P
RLV0N
RLV1P
RLV1N
RLV2P
RLV2N
RLVCKP
RLVCKN
RLV4P
RLV4N

WPWM

RLV5P
RLV5N
RLV6P
RLV6N
RLV7P
RLV7N

FLK
GCLK6
GCLK5

LLV3P
LLV3N
LLV0P
LLV0N
LLV1P
LLV1N
LLV2P
LLV2N
LLVCKP
LLVCKN
LLV4P
LLV4N

LLV5P
LLV5N
LLV6P
LLV6N
LLV7P
LLV7N
GSPR

GSP/VST

SOE

POL

VDD_ODD

GCLK4
GCLK2

NC_23

DPM
HCON

NC_15
NC_26
LEDON

NC_20
NC_19

NC_11
NC_17

NC_43

W25

AF16

NC_73

U26

AF1

NC_59

U25

AE3

NC_45

U24

AD14

NC_40

V26

AD3

NC_29

V25

AF15

NC_72

V24

AF2

NC_60

W24

AE15

NC_57

Y26

AD2

NC_28

Y25

AD16

NC_42

Y24

AD15

NC_41

AE16

NC_58

AC26
AC25
AA26
AA25

AF3

NC_61

AA24

AF14

NC_71

AB26

AD1

NC_27
AB25
AB24

AD13

NC_39
AC24

AE14

NC_56
AD26

AE13

NC_55
AD25
AD24

AE4

NC_46

AD5

NC_31
AD23

AF4

NC_62
AE23

AD4

NC_30
AE26
AE25

AE2

NC_44
AF26
AF25
AE24

AF8

NC_66
AF24

AD9

NC_35
AF23
AD22

AE9

NC_51
AE22

AF9

NC_67
AF22

AE11

NC_53

AF6

NC_64
AD19
AE19

AE6

NC_48
AD21

AF11

NC_69
AE21

AD6

NC_32
AF21

AD12

NC_38
AD20

AE5

NC_47
AE20

AF12

NC_70
AF20

AF5

NC_63
AF19

AE12

NC_54
AD18
AE18

AE10

NC_52
AF18

AF7

NC_65

AD11

NC_37

AD7

NC_33
AB22

AD10

NC_36
AB23

AE7

NC_49
AC23

AF10

NC_68
AC22

AD8

NC_34

AB16
AA14
AC15

Y16
AC16
AC14

AE8

NC_50

AA16

Y11

NC_12
AA15

Y19

GND_105

Y10
AA11

AB15
AB14

ACKP/RLV3P/RED[3]
ACKM/RLV3N/RED[2]
A0P/RLV0P/RED[9]
A0M/RLV0N/RED[8]
A1P/RLV1P/RED[7]
A1M/RLV1N/RED[6]
A2P/RLV2P/RED[5]
A2M/RLV2N/RED[4]
A3P/RLV4P/RED[1]
A3M/RLV4N/RED[0]
A4P/RLV5P/GREEN[9]
A4M/RLV5N/GREEN[8]

B0P/RLV6P/GREEN[7]
B0M/RLV6N/GREEN[6]
B1P/RLV7P/GREEN[5]
B1M/RLV7N/GREEN[4]
B2P/RLV8P/GREEN[3]
B2M/RLV8N/GREEN[2]
B3P/TCON11/BLUE[9]
B3M/TCON10/BLUE[8]
B4P/TCON9/BLUE[7]
B4M/TCON8/BLUE[6]

C0P/LLV0P/BLUE[5]
C0M/LLV0N/BLUE[4]
C1P/LLV1P/BLUE[3]
C1M/LLV1N/BLUE[2]
C2P/LLV2P/BLUE[1]
C2M/LLV2N/BLUE[0]

FRC_GPIO0/UART_RX

FRC_GPIO9/UART_TX

S7M_NON_DIVX & DD

IC101-*3

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25
Y24

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23

CCKP/LLV3P

AE23

CCKM/LLV3N

AE26
AE25
AF26
AF25
AE24
AF24
AF23

C3P/LLV4P

AD22

C3M/LLV4N

AE22

C4P/LLV5P

AF22

C4M/LLV5N

AD19

DCKP/TCON5

AE19

DCKM/TCON4

AD21

D0P/LLV6P

AE21

D0M/LLV6N

AF21

D1P/LLV7P

AD20

D1M/LLV7N

AE20

D2P/LLV8P

AF20

D2M/LLV8N

AF19

D3P/TCON3

AD18

D3M/TCON2

AE18

D4P/TCON1

AF18

D4M/TCON0

AB22
AB23
AC23
AC22

AB16
AA14

FRC_GPIO1

AC15

FRC_GPIO3

Y16

FRC_GPIO8

AC16
AC14

FRC_GPIO10

AA16

FRC_I2CM_DA

AA15

FRC_I2CM_CK

Y10

FRC_I2CS_DA

AA11

FRC_I2CS_CK

AB15

FRC_PWM0

AB14

FRC_PWM1

LGE107B-LF-1 (S7M Non Divx/RM/MS10)

AE1

FRC_DDR3_A0/DDR2_NC

AF16

FRC_DDR3_A1/DDR2_A6

AF1

FRC_DDR3_A2/DDR2_A7

AE3

FRC_DDR3_A3/DDR2_A1

AD14

FRC_DDR3_A4/DDR2_CASZ

AD3

FRC_DDR3_A5/DDR2_A10

AF15

FRC_DDR3_A6/DDR2_A0

AF2

FRC_DDR3_A7/DDR2_A5

AE15

FRC_DDR3_A8/DDR2_A2

AD2

FRC_DDR3_A9/DDR2_A9

AD16

FRC_DDR3_A10/DDR2_A11

AD15

FRC_DDR3_A11/DDR2_A4

AE16

FRC_DDR3_A12/DDR2_A8

AF3

FRC_DDR3_BA0/DDR2_BA2

AF14

FRC_DDR3_BA1/DDR2_ODT

AD1

FRC_DDR3_BA2/DDR2_A12

AD13

FRC_DDR3_MCLK/DDR2_MCLK

AE14

FRC_DDR3_CKE/DDR2_RASZ

AE13

FRC_DDR3_MCLKZ/DDR2_MCLKZ

AE4

FRC_DDR3_ODT/DDR2_BA1

AD5

FRC_DDR3_RASZ/DDR2_WEZ

AF4

FRC_DDR3_CASZ/DDR2_CKE

AD4

FRC_DDR3_WEZ/DDR2_BA0

AE2

FRC_DDR3_RESETB/DDR2_A3

AF8

FRC_DDR3_DQSL/DDR2_DQS0

AD9

FRC_DDR3_DQSLB/DDR2_DQSB0

AE9

FRC_DDR3_DQSU/DDR2_DQS1

AF9

FRC_DDR3_DQSUB/DDR2_DQSB1

AE11

FRC_DDR3_DML/DDR2_DQ7

AF6

FRC_DDR3_DMU/DDR2_DQ11

AE6

FRC_DDR3_DQL0/DDR2_DQ6

AF11

FRC_DDR3_DQL1/DDR2_DQ0

AD6

FRC_DDR3_DQL2/DDR2_DQ1

AD12

FRC_DDR3_DQL3/DDR2_DQ2

AE5

FRC_DDR3_DQL4/DDR2_DQ4

AF12

FRC_DDR3_DQL5/DDR2_NC

AF5

FRC_DDR3_DQL6/DDR2_DQ3

AE12

FRC_DDR3_DQL7/DDR2_DQ5

AE10

FRC_DDR3_DQU0/DDR2_DQ8

AF7

FRC_DDR3_DQU1/DDR2_DQ14

AD11

FRC_DDR3_DQU2/DDR2_DQ13

AD7

FRC_DDR3_DQU3/DDR2_DQ12

AD10

GPIO0/TCON15/HSYNC/VDD_ODD

FRC_DDR3_DQU4/DDR2_DQ15

AE7

GPIO1/TCON14/VSYNC/VDD_EVEN

FRC_DDR3_DQU5/DDR2_DQ9

AF10

FRC_DDR3_DQU6/DDR2_DQ10

AD8

FRC_DDR3_DQU7/DDR2_DQM1

AE8

FRC_DDR3_NC/DDR2_DQM0

Y11

FRC_REXT

Y19

FRC_TESTPIN

ACKP/RLV3P/RED[3]
ACKM/RLV3N/RED[2]
A0P/RLV0P/RED[9]
A0M/RLV0N/RED[8]
A1P/RLV1P/RED[7]
A1M/RLV1N/RED[6]
A2P/RLV2P/RED[5]
A2M/RLV2N/RED[4]
A3P/RLV4P/RED[1]
A3M/RLV4N/RED[0]
A4P/RLV5P/GREEN[9]
A4M/RLV5N/GREEN[8]

BCKP/TCON13/GREEN[1]
BCKM/TCON12/GREEN[0]

B0P/RLV6P/GREEN[7]
B0M/RLV6N/GREEN[6]
B1P/RLV7P/GREEN[5]
B1M/RLV7N/GREEN[4]
B2P/RLV8P/GREEN[3]
B2M/RLV8N/GREEN[2]
B3P/TCON11/BLUE[9]
B3M/TCON10/BLUE[8]
B4P/TCON9/BLUE[7]
B4M/TCON8/BLUE[6]

C0P/LLV0P/BLUE[5]
C0M/LLV0N/BLUE[4]
C1P/LLV1P/BLUE[3]
C1M/LLV1N/BLUE[2]
C2P/LLV2P/BLUE[1]
C2M/LLV2N/BLUE[0]

GPIO2/TCON7/LDE/GCLK4
GPIO3/TCON6/LCK/GCLK2

FRC_GPIO0/UART_RX

FRC_GPIO9/UART_TX

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25
Y24

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23

CCKP/LLV3P

AE23

CCKM/LLV3N

AE26
AE25
AF26
AF25
AE24
AF24
AF23

C3P/LLV4P

AD22

C3M/LLV4N

AE22

C4P/LLV5P

AF22

C4M/LLV5N

AD19

DCKP/TCON5

AE19

DCKM/TCON4

AD21

D0P/LLV6P

AE21

D0M/LLV6N

AF21

D1P/LLV7P

AD20

D1M/LLV7N

AE20

D2P/LLV8P

AF20

D2M/LLV8N

AF19

D3P/TCON3

AD18

D3M/TCON2

AE18

D4P/TCON1

AF18

D4M/TCON0

AB22
AB23
AC23
AC22

AB16
AA14

FRC_GPIO1

AC15

FRC_GPIO3

Y16

FRC_GPIO8

AC16
AC14

FRC_GPIO10

AA16

FRC_I2CM_DA

AA15

FRC_I2CM_CK

Y10

FRC_I2CS_DA

AA11

FRC_I2CS_CK

AB15

FRC_PWM0

AB14

FRC_PWM1

S7T_DIVX & MS10

IC101-*4

LGE105D(S7-Tcon Divx_ Non_RM)

AE1

NC_43

AF16

NC_73

AF1

NC_59

AE3

NC_45

AD14

NC_40

AD3

NC_29

AF15

NC_72

AF2

NC_60

AE15

NC_57

AD2

NC_28

AD16

NC_42

AD15

NC_41

AE16

NC_58

AF3

NC_61

AF14

NC_71

AD1

NC_27

AD13

NC_39

AE14

NC_56

AE13

NC_55

AE4

NC_46

AD5

NC_31

AF4

NC_62

AD4

NC_30

AE2

NC_44

AF8

NC_66

AD9

NC_35

AE9

NC_51

AF9

NC_67

AE11

NC_53

AF6

NC_64

AE6

NC_48

AF11

NC_69

AD6

NC_32

AD12

NC_38

AE5

NC_47

AF12

NC_70

AF5

NC_63

AE12

NC_54

AE10

NC_52

AF7

NC_65

AD11

NC_37

AD7

NC_33

AD10

NC_36

AE7

NC_49

AF10

NC_68

AD8

NC_34

AE8

NC_50

Y11

NC_12

Y19

GND_105

OPTP/FLK2

OPTN/FLK3

GOE/GCLK1
GSC/GCLK3

VDD_EVEN

SCAN_BLK
SCAN_BLK1

+3.3V_Normal

R117

1K

1K

OPT

OPT

R118

1K

1K

W26

RLV3P

W25

RLV3N

U26

RLV0P

U25

RLV0N

U24

RLV1P

V26

RLV1N

V25

RLV2P

V24

RLV2N

W24

RLVCKP

Y26

RLVCKN

Y25

RLV4P

Y24

RLV4N

AC26

WPWM

AC25

OPTP/FLK2

AA26

RLV5P

AA25

RLV5N

AA24

RLV6P

AB26

RLV6N

AB25

RLV7P

AB24

RLV7N

AC24

OPTN/FLK3

AD26

FLK

AD25

GCLK6

AD24

GCLK5

AD23

LLV3P

AE23

LLV3N

AE26

LLV0P

AE25

LLV0N

AF26

LLV1P

AF25

LLV1N

AE24

LLV2P

AF24

LLV2N

AF23

LLVCKP

AD22

LLVCKN

AE22

LLV4P

AF22

LLV4N

AD19

GOE/GCLK1

AE19

GSC/GCLK3

AD21

LLV5P

AE21

LLV5N

AF21

LLV6P

AD20

LLV6N

AE20

LLV7P

AF20

LLV7N

AF19

GSPR

AD18

GSP/VST

AE18

SOE

AF18

POL

AB22

VDD_ODD

AB23

VDD_EVEN

AC23

GCLK4

AC22

GCLK2

AB16

NC_23

AA14

DPM

AC15

HCON

Y16

NC_15

AC16

NC_26

AC14

LEDON

AA16

NC_20

AA15

NC_19

Y10

NC_11

AA11

NC_17

AB15

SCAN_BLK

AB14

SCAN_BLK1

R125

1K

R123

1K

R120

1K

OPT

OPT

OPT

R121

R126

R124

1K

1K

1K

S7M_DIVX & DD

IC101-*1

LGE107DB-LF-1 (S7M Divx_Non RM/MS10)

AE1

FRC_DDR3_A0/DDR2_NC

AF16

FRC_DDR3_A1/DDR2_A6

AF1

FRC_DDR3_A2/DDR2_A7

AE3

FRC_DDR3_A3/DDR2_A1

AD14

FRC_DDR3_A4/DDR2_CASZ

AD3

FRC_DDR3_A5/DDR2_A10

AF15

FRC_DDR3_A6/DDR2_A0

AF2

FRC_DDR3_A7/DDR2_A5

AE15

FRC_DDR3_A8/DDR2_A2

AD2

FRC_DDR3_A9/DDR2_A9

AD16

FRC_DDR3_A10/DDR2_A11

AD15

FRC_DDR3_A11/DDR2_A4

AE16

FRC_DDR3_A12/DDR2_A8

AF3

FRC_DDR3_BA0/DDR2_BA2

AF14

FRC_DDR3_BA1/DDR2_ODT

AD1

FRC_DDR3_BA2/DDR2_A12

AD13

FRC_DDR3_MCLK/DDR2_MCLK

AE14

FRC_DDR3_CKE/DDR2_RASZ

AE13

FRC_DDR3_MCLKZ/DDR2_MCLKZ

AE4

FRC_DDR3_ODT/DDR2_BA1

AD5

FRC_DDR3_RASZ/DDR2_WEZ

AF4

FRC_DDR3_CASZ/DDR2_CKE

AD4

FRC_DDR3_WEZ/DDR2_BA0

AE2

FRC_DDR3_RESETB/DDR2_A3

AF8

FRC_DDR3_DQSL/DDR2_DQS0

AD9

FRC_DDR3_DQSLB/DDR2_DQSB0

AE9

FRC_DDR3_DQSU/DDR2_DQS1

AF9

FRC_DDR3_DQSUB/DDR2_DQSB1

AE11

FRC_DDR3_DML/DDR2_DQ7

AF6

FRC_DDR3_DMU/DDR2_DQ11

AE6

FRC_DDR3_DQL0/DDR2_DQ6

AF11

FRC_DDR3_DQL1/DDR2_DQ0

AD6

FRC_DDR3_DQL2/DDR2_DQ1

AD12

FRC_DDR3_DQL3/DDR2_DQ2

AE5

FRC_DDR3_DQL4/DDR2_DQ4

AF12

FRC_DDR3_DQL5/DDR2_NC

AF5

FRC_DDR3_DQL6/DDR2_DQ3

AE12

FRC_DDR3_DQL7/DDR2_DQ5

AE10

FRC_DDR3_DQU0/DDR2_DQ8

AF7

FRC_DDR3_DQU1/DDR2_DQ14

AD11

FRC_DDR3_DQU2/DDR2_DQ13

AD7

FRC_DDR3_DQU3/DDR2_DQ12

AD10

GPIO0/TCON15/HSYNC/VDD_ODD

FRC_DDR3_DQU4/DDR2_DQ15

AE7

GPIO1/TCON14/VSYNC/VDD_EVEN

FRC_DDR3_DQU5/DDR2_DQ9

AF10

FRC_DDR3_DQU6/DDR2_DQ10

AD8

FRC_DDR3_DQU7/DDR2_DQM1

AE8

FRC_DDR3_NC/DDR2_DQM0

Y11

FRC_REXT

Y19

FRC_TESTPIN

W26

ACKP/RLV3P/RED[3]

W25

ACKM/RLV3N/RED[2]

U26

A0P/RLV0P/RED[9]

U25

A0M/RLV0N/RED[8]

U24

A1P/RLV1P/RED[7]

V26

A1M/RLV1N/RED[6]

V25

A2P/RLV2P/RED[5]

V24

A2M/RLV2N/RED[4]

W24

A3P/RLV4P/RED[1]

Y26

A3M/RLV4N/RED[0]

Y25

A4P/RLV5P/GREEN[9]

Y24

A4M/RLV5N/GREEN[8]

AC26

BCKP/TCON13/GREEN[1]

AC25

BCKM/TCON12/GREEN[0]

AA26

B0P/RLV6P/GREEN[7]

AA25

B0M/RLV6N/GREEN[6]

AA24

B1P/RLV7P/GREEN[5]

AB26

B1M/RLV7N/GREEN[4]

AB25

B2P/RLV8P/GREEN[3]

AB24

B2M/RLV8N/GREEN[2]

AC24

B3P/TCON11/BLUE[9]

AD26

B3M/TCON10/BLUE[8]

AD25

B4P/TCON9/BLUE[7]

AD24

B4M/TCON8/BLUE[6]

AD23

CCKP/LLV3P

AE23

CCKM/LLV3N

AE26

C0P/LLV0P/BLUE[5]

AE25

C0M/LLV0N/BLUE[4]

AF26

C1P/LLV1P/BLUE[3]

AF25

C1M/LLV1N/BLUE[2]

AE24

C2P/LLV2P/BLUE[1]

AF24

C2M/LLV2N/BLUE[0]

AF23

C3P/LLV4P

AD22

C3M/LLV4N

AE22

C4P/LLV5P

AF22

C4M/LLV5N

AD19

DCKP/TCON5

AE19

DCKM/TCON4

AD21

D0P/LLV6P

AE21

D0M/LLV6N

AF21

D1P/LLV7P

AD20

D1M/LLV7N

AE20

D2P/LLV8P

AF20

D2M/LLV8N

AF19

D3P/TCON3

AD18

D3M/TCON2

AE18

D4P/TCON1

AF18

D4M/TCON0

AB22
AB23
AC23

GPIO2/TCON7/LDE/GCLK4

AC22

GPIO3/TCON6/LCK/GCLK2

AB16

FRC_GPIO0/UART_RX

AA14

FRC_GPIO1

AC15

FRC_GPIO3

Y16

FRC_GPIO8

AC16

FRC_GPIO9/UART_TX

AC14

FRC_GPIO10

AA16

FRC_I2CM_DA

AA15

FRC_I2CM_CK

Y10

FRC_I2CS_DA

AA11

FRC_I2CS_CK

AB15

FRC_PWM0

AB14

FRC_PWM1

S7T_NON_DIVX & MS10

LGE105 (S7-Tcon Non_Divx/RM)

AE1

NC_43

AF16

NC_73

AF1

NC_59

AE3

NC_45

AD14

NC_40

AD3

NC_29

AF15

NC_72

AF2

NC_60

AE15

NC_57

AD2

NC_28

AD16

NC_42

AD15

NC_41

AE16

NC_58

AF3

NC_61

AF14

NC_71

AD1

NC_27

AD13

NC_39

AE14

NC_56

AE13

NC_55

AE4

NC_46

AD5

NC_31

AF4

NC_62

AD4

NC_30

AE2

NC_44

AF8

NC_66

AD9

NC_35

AE9

NC_51

AF9

NC_67

AE11

NC_53

AF6

NC_64

AE6

NC_48

AF11

NC_69

AD6

NC_32

AD12

NC_38

AE5

NC_47

AF12

NC_70

AF5

NC_63

AE12

NC_54

AE10

NC_52

AF7

NC_65

AD11

NC_37

AD7

NC_33

AD10

NC_36

AE7

NC_49

AF10

NC_68

AD8

NC_34

AE8

NC_50

Y11

NC_12

Y19

GND_105

AUD_LRCH

AUD_SCK
AUD_MASTER_CLK

PWM1

PWM0

/PF_CE0
/PF_CE1

/PF_OE
/PF_WE
PF_ALE
/PF_WP

/F_RB

for SYSTEM/HDCP
EEPROM&URSA3

IC101-*6

W26

RLV3P

W25

RLV3N

U26

RLV0P

U25

RLV0N

U24

RLV1P

V26

RLV1N

V25

RLV2P

V24

RLV2N

W24

RLVCKP

Y26

RLVCKN

Y25

RLV4P

Y24

RLV4N

AC26

WPWM

AC25

OPTP/FLK2

AA26

RLV5P

AA25

RLV5N

AA24

RLV6P

AB26

RLV6N

AB25

RLV7P

AB24

RLV7N

AC24

OPTN/FLK3

AD26

FLK

AD25

GCLK6

AD24

GCLK5

AD23

LLV3P

AE23

LLV3N

AE26

LLV0P

AE25

LLV0N

AF26

LLV1P

AF25

LLV1N

AE24

LLV2P

AF24

LLV2N

AF23

LLVCKP

AD22

LLVCKN

AE22

LLV4P

AF22

LLV4N

AD19

GOE/GCLK1

AE19

GSC/GCLK3

AD21

LLV5P

AE21

LLV5N

AF21

LLV6P

AD20

LLV6N

AE20

LLV7P

AF20

LLV7N

AF19

GSPR

AD18

GSP/VST

AE18

SOE

AF18

POL

AB22

VDD_ODD

AB23

VDD_EVEN

AC23

GCLK4

AC22

GCLK2

AB16

NC_23

AA14

DPM

AC15

HCON

Y16

NC_15

AC16

NC_26

AC14

LEDON

AA16

NC_20

AA15

NC_19

Y10

NC_11

AA11

NC_17

AB15

SCAN_BLK

AB14

SCAN_BLK1

+5V_Normal

S7_TXD
S7_RXD

I2C_SDA
I2C_SCL

RGB_DDC_SDA
RGB_DDC_SCL

S7T_NON_DIVX & DD

IC101-*7

LGE105B-LF-1 (S7-Tcon Non_Divx/RM/MS10)

AE1

NC_43

AF16

NC_73

AF1

NC_59

AE3

NC_45

AD14

NC_40

AD3

NC_29

AF15

NC_72

AF2

NC_60

AE15

NC_57

AD2

NC_28

AD16

NC_42

AD15

NC_41

AE16

NC_58

AF3

NC_61

AF14

NC_71

AD1

NC_27

AD13

NC_39

AE14

NC_56

AE13

NC_55

AE4

NC_46

AD5

NC_31

AF4

NC_62

AD4

NC_30

AE2

NC_44

AF8

NC_66

AD9

NC_35

AE9

NC_51

AF9

NC_67

AE11

NC_53

AF6

NC_64

AE6

NC_48

AF11

NC_69

AD6

NC_32

AD12

NC_38

AE5

NC_47

AF12

NC_70

AF5

NC_63

AE12

NC_54

AE10

NC_52

AF7

NC_65

AD11

NC_37

AD7

NC_33

AD10

NC_36

AE7

NC_49

AF10

NC_68

AD8

NC_34

AE8

NC_50

Y11

NC_12

Y19

GND_105

AR103

22

RLV3P
RLV3N
RLV0P
RLV0N
RLV1P
RLV1N
RLV2P
RLV2N
RLVCKP
RLVCKN
RLV4P
RLV4N

WPWM

OPTP/FLK2

RLV5P
RLV5N
RLV6P
RLV6N
RLV7P
RLV7N

OPTN/FLK3

FLK
GCLK6
GCLK5

LLV3P
LLV3N
LLV0P
LLV0N
LLV1P
LLV1N
LLV2P
LLV2N
LLVCKP
LLVCKN
LLV4P
LLV4N

GOE/GCLK1
GSC/GCLK3

LLV5P
LLV5N
LLV6P
LLV6N
LLV7P
LLV7N
GSPR

GSP/VST

SOE

POL

VDD_ODD

VDD_EVEN

GCLK4
GCLK2

NC_23

DPM
HCON

NC_15
NC_26
LEDON

NC_20
NC_19

NC_11
NC_17

SCAN_BLK
SCAN_BLK1

PCM_D[0-7]

PCM_A[0-14]

R132
10K

R133
10K

AR104

TO SCART1

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25
Y24

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23
AE23
AE26
AE25
AF26
AF25
AE24
AF24
AF23
AD22
AE22
AF22

AD19
AE19
AD21
AE21
AF21
AD20
AE20
AF20
AF19
AD18
AE18
AF18

AB22
AB23
AC23
AC22

AB16
AA14
AC15

Y16
AC16
AC14

AA16
AA15

Y10
AA11

AB15
AB14

/PCM_REG

/PCM_OE

/PCM_WE

/PCM_IORD

/PCM_IOWR

/PCM_CE

/PCM_IRQA

/PCM_CD

/PCM_WAIT

PCM_RST

22

MODEL_OPT_3

PCM_5V_CTL

SC_RE2
SC_RE1

DSUB_DET

/RST_PHY
/RST_HUB

C108

0.1uF
OPT

R134 22

R135 22

R136 22

R137 22

R138 22

R139 22

PWM0
PWM1
PWM2

PCM_D[0]
PCM_D[1]
PCM_D[2]
PCM_D[3]
PCM_D[4]
PCM_D[5]
PCM_D[6]
PCM_D[7]

PCM_A[0]
PCM_A[1]
PCM_A[2]
PCM_A[3]
PCM_A[4]
PCM_A[5]
PCM_A[6]
PCM_A[7]
PCM_A[8]
PCM_A[9]
PCM_A[10]
PCM_A[11]
PCM_A[12]
PCM_A[13]
PCM_A[14]

C109

0.1uF

LGE107D (S7M Divx_Non RM)

U22

PCM_D0

T21

PCM_D1

T22

PCM_D2

AB18

PCM_D3

AC18

PCM_D4

AC19

PCM_D5

AC20

PCM_D6

AC21

PCM_D7

U21

PCM_A0

V21

PCM_A1

Y22

PCM_A2

AA22

PCM_A3

R22

PCM_A4

R21

PCM_A5

T23

PCM_A6

T24

PCM_A7

AA23

PCM_A8

Y20

PCM_A9

AB17

PCM_A10

AA21

PCM_A11

U23

PCM_A12

Y23

PCM_A13

W23

PCM_A14

W22

PCM_REG_N

AA17

PCM_OE_N

V22

PCM_WE_N

W21

PCM_IORD_N

Y21

PCM_IOWR_N

AA20

PCM_CE_N

V23

PCM_IRQA_N

P23

PCM_CD_N

R23

PCM_WAIT_N

P22

PCM_RESET

AC17

PCM_PF_CE0Z

AB20

PCM_PF_CE1Z

AA18

PCM_PF_OEZ

AB21

PCM_PF_WEZ

AB19

PCM_PF_ALE

AD17

PCM_PF_AD[15]

AA19

PCM_PF_RBZ

M23

UART_TX2/GPIO65

N23

UART_RX2/GPIO64

M22

DDCR_DA/GPIO71

N22

DDCR_CK/GPIO72

A5

DDCA_DA/UART0_TX

B5

DDCA_CK/UART0_RX

K23

PWM0/GPIO66

K22

PWM1/GPIO67

G23

PWM2/GPIO68

G22

PWM3/GPIO69

G21

PWM4/GPIO70

C6

SAR0/GPIO31

B6

SAR1/GPIO32

C8

SAR2/GPIO33

C7

SAR3/GPIO34

A6

SAR4/GPIO35

IC101

S7M_DIVX & MS10

GPIO7/PM1/PM_UART_TX

GPIO11/PM5/PM_UART_RX/INT1

PM_SPI_CS1/GPIO12/PM6
PM_SPI_WP1/GPIO13/PM7

PM_SPI_WP2/GPIO14/PM8/INT2

PM_SPI_CS2/GPIO16/PM10

GPIO17/PM11/INT3
GPIO18/PM12/INT4

GPIO143/TCON0
GPIO145/TCON2
GPIO147/TCON4
GPIO149/TCON6
GPIO151/TCON8

GPIO36/UART3_RX
GPIO37/UART3_TX

GPIO38
GPIO39
GPIO40
GPIO41
GPIO42

GPIO50/UART1_RX
GPIO51/UART1_TX

GPIO6/PM0/INT0

GPIO8/PM2
GPIO9/PM3

GPIO10/PM4

GPIO15/PM9

PM_SPI_CK/GPIO1
GPIO0/PM_SPI_CZ
PM_SPI_DI/GPIO2
PM_SPI_DO/GPIO3

TS0_CLK
TS0_VLD

TS0_SYNC

TS0_D0
TS0_D1
TS0_D2
TS0_D3
TS0_D4
TS0_D5
TS0_D6
TS0_D7

TS1_CLK
TS1_VLD

TS1_SYNC

TS1_D0
TS1_D1
TS1_D2
TS1_D3
TS1_D4
TS1_D5
TS1_D6
TS1_D7

MPIF_CLK

MPIF_CS_N

MPIF_BUSY

MPIF_D0
MPIF_D1
MPIF_D2
MPIF_D3

N21
M21
L22
L21
P21

K21
L23
K20
L20
M20
G20
G19

F20
F19

E7
D7
E11
G9
F9
C5
E8
E9
F7
F6
D8
G12
F10

D9
D11
E10
D10

AA9
AA5
AA10

AB5
AC4
Y6
AA6
W6
AA7
Y9
AA8

AC5
AC6
AB6

AC10
AB10
AC9
AB9
AC8
AB8
AC7
AB7

D12
D14

E14

E12
F12
D13
E13

M_REMOTE

M_REMOTE

R14633

R14733

CI_TS_DATA[0]
CI_TS_DATA[1]
CI_TS_DATA[2]
CI_TS_DATA[3]
CI_TS_DATA[4]
CI_TS_DATA[5]
CI_TS_DATA[6]
CI_TS_DATA[7]

FE_TS_DATA[0]
FE_TS_DATA[1]
FE_TS_DATA[2]
FE_TS_DATA[3]
FE_TS_DATA[4]
FE_TS_DATA[5]
FE_TS_DATA[6]
FE_TS_DATA[7]

R160
1K

5V_DET_HDMI_1
5V_DET_HDMI_2
5V_DET_HDMI_4
5V_DET_HDMI_3

WIRELESS_DL_RX
WIRELESS_DL_TX
ET_RXER
FRC_RESET
SC1/COMP1_DET
ERROR_OUT
MODEL_OPT_0

R14822

M_REMOTE_RX

R14922

M_REMOTE_TX

USB1_OCD
USB1_CTL
HP_DET

R1500

CONTROL_ATTEN

R1100

MODEL_OPT_6
MODEL_OPT_1

/FLASH_WP

MODEL_OPT_2
TUNER_RESET
DEMOD_RESET

AV_CVBS_DET

R15133

/PIF_SPI_CS

URSA degug port

UART_FRC_RX

UART_FRC_TX

SIDEAV_DET

SPI_SCK

/SPI_CS
SPI_SDI
SPI_SDO

CI_TS_CLK
CI_TS_VAL
CI_TS_SYNC

CI_TS_DATA[0-7]

FE_TS_CLK
FE_TS_VAL_ERR
FE_TS_SYNC

FE_TS_DATA[0-7]

for WIRELESS READY

for ETHERNET PHY

for SERIAL FLASH

from CI SLOT

Internal demod out
/External demod in

URSA_DEBUG

P3903

12505WS-03A00

1

2

FRC_SCL

3

FRC_SDA

4

URSA_DEBUG

P3904

12505WS-03A00

1

2

3

4

IC104

M24M01-HRMN6TP

NC

1

E1

2

E2

A0’h

3

VSS

4

EEPROM

8

7

6

5

C105

0.1uF

VCC

WP

SCL

SDA

HDCP EEPROM

R113

4.7K

CAT24WC08W-T

A0

1

$0.199

A1

2

A2

3

VSS

4

IC103

8

7

6

5

VCC

WP

SCL

SDA

R127 4.7K

+3.3V_Normal

R128

R129 22

C107

0.1uF

Addr:10101--

22

I2C_SCL

I2C_SDA

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

+3.3V_Normal

C104
8pF
OPT

R111 22

R112 22

C106
8pF
OPT

I2C_SCL

I2C_SDA

S7_DIVX & MS10

IC101-*8

LGE101D (S7 Non_Tcon/RM)

AE1

NC_48

AF16

NC_78

AF1

NC_64

AE3

NC_50

AD14

NC_45

AD3

NC_34

AF15

NC_77

AF2

NC_65

AE15

NC_62

AD2

NC_33

AD16

NC_47

AD15

NC_46

AE16

NC_63

AF3

NC_66

AF14

NC_76

AD1

NC_32

AD13

NC_44

AE14

NC_61

AE13

NC_60

AE4

NC_51

AD5

NC_36

AF4

NC_67

AD4

NC_35

AE2

NC_49

AF8

NC_71

AD9

NC_40

AE9

NC_56

AF9

NC_72

AE11

NC_58

AF6

NC_69

AE6

NC_53

AF11

NC_74

AD6

NC_37

AD12

NC_43

AE5

NC_52

AF12

NC_75

AF5

NC_68

AE12

NC_59

AE10

NC_57

AF7

NC_70

AD11

NC_42

AD7

NC_38

AD10

NC_41

AE7

NC_54

AF10

NC_73

AD8

NC_39

AE8

NC_55

Y11

NC_12

Y19

GND_105

LVACLKP/LLV6P/BLUE[3]
LVACLKN/LLV6N/BLUE[2]

LVA0P/LLV3P/BLUE[9]
LVA0N/LLV3N/BLUE[8]
LVA1P/LLV4P/BLUE[7]
LVA1N/LLV4N/BLUE[6]
LVA2P/LLV5P/BLUE[5]
LVA2N/LLV5N/BLUE[4]
LVA3P/LLV7P/BLUE[1]
LVA3N/LLV7N/BLUE[0]

LVBCLKP/LLV0P/GREEN[5]
LVBCLKN/LLV0N/GREEN[4]

LVB0P/RLV6P/RED[1]

LVB0N/RLV6N/RED[0]
LVB1P/RLV7P/GREEN[9]
LVB1N/RLV7N/GREEN[8]
LVB2P/RLV8P/GREEN[7]
LVB2N/RLV8N/GREEN[6]
LVB3P/LLV1P/GREEN[3]
LVB3N/LLV1N/GREEN[2]
LVB4P/LLV0P/GREEN[1]
LVB4N/LLV0N/GREEN[0]

TCON3/OE/GOE/GCLK2

TCON15/SCAN_BLK1
TCON18/CS7/GCLK5
TCON19/CS8/GCLK6
TCON11/CS5/HCON
TCON10/CS4/OPT_N
TCON9/CS3/OPT_P

TCON1/STV/GSP/VST

TCON14/SACN_BLK

TCON21/CS10/VGH_ODD

TCON20/CS9/VGH_EVEN

TCON17/CS6/GCLK4

S7_DIVX & DD

IC101-*9

LGE101DB-LF-1 (S7 Non_Tcon/RM/MS10)

W26

AE1

W25

NC_48

AF16

U26

NC_78

AF1

U25

NC_64

AE3

U24

NC_50

AD14

V26

NC_45

AD3

V25

NC_34

AF15

V24

NC_77

AF2

W24

NC_65

AE15

Y26

NC_62

AD2

Y25

NC_33

AD16

LVA4P/LLV8P

Y24

NC_47

AD15

LVA4N/LLV8N

NC_46

AE16

NC_63
AC26
AC25
AA26
AA25

AF3

AA24

NC_66

AF14

AB26

NC_76

AD1

AB25

NC_32
AB24

AD13

AC24

NC_44

AE14

AD26

NC_61

AE13

AD25

NC_60
AD24

AE4

NC_51

AD5

AD23

NC_36

AF4

RLV3P/RED[7]

AE23

NC_67

AD4

RLV3N/RED[6]

AE26

NC_35

RLV0P/LVSYNC

AE25

AE2

RLV0N/LHSYNC

AF26

NC_49

RLV1N/LCK

AF25

RLV2P/RED[9]

AE24

AF8

RLV1P/LDE

AF24

NC_71

AD9

RLV2N/RED[8]

AF23

NC_40

RLV4P/RED[5]

AD22

AE9

RLV4N/RED[4]

AE22

NC_56

AF9

RLV5P/RED[3]

AF22

NC_72

RLV5N/RED[2]

AE11

NC_58

AF6

AD19

NC_69
AE19

AE6

AD21

NC_53

AF11

AE21

NC_74

AD6

AF21

NC_37

AD12

AD20

NC_43

AE5

AE20

NC_52

AF12

AF20

NC_75

AF5

TCON16/WPWM

AF19

NC_68

AE12

TCON12/DPM

AD18

NC_59
AE18

AE10

TCON5/TP/SOE

AF18

NC_57

AF7

NC_70

AD11

NC_42

AD7

AB22

NC_38

AD10

AB23

NC_41

AE7

AC23

NC_54

AF10

TCON13/LEDON

AC22

NC_73

AD8

NC_39

AB16

NC_26

AA14

NC_19

AC15

NC_30

Y16

NC_15

AC16

NC_31

AC14

AE8

NC_29

NC_55
AA16

Y11

NC_21

AA15

NC_12

Y19

NC_20

GND_105
Y10

NC_11

AA11

NC_17

AB15

NC_25

AB14

NC_24

LVACLKP/LLV6P/BLUE[3]
LVACLKN/LLV6N/BLUE[2]

LVA0P/LLV3P/BLUE[9]
LVA0N/LLV3N/BLUE[8]
LVA1P/LLV4P/BLUE[7]
LVA1N/LLV4N/BLUE[6]
LVA2P/LLV5P/BLUE[5]
LVA2N/LLV5N/BLUE[4]
LVA3P/LLV7P/BLUE[1]
LVA3N/LLV7N/BLUE[0]

LVBCLKP/LLV0P/GREEN[5]
LVBCLKN/LLV0N/GREEN[4]

LVB0P/RLV6P/RED[1]

LVB0N/RLV6N/RED[0]
LVB1P/RLV7P/GREEN[9]
LVB1N/RLV7N/GREEN[8]
LVB2P/RLV8P/GREEN[7]
LVB2N/RLV8N/GREEN[6]
LVB3P/LLV1P/GREEN[3]
LVB3N/LLV1N/GREEN[2]
LVB4P/LLV0P/GREEN[1]
LVB4N/LLV0N/GREEN[0]

TCON3/OE/GOE/GCLK2

TCON15/SCAN_BLK1
TCON18/CS7/GCLK5
TCON19/CS8/GCLK6
TCON11/CS5/HCON
TCON10/CS4/OPT_N
TCON9/CS3/OPT_P

TCON1/STV/GSP/VST

TCON14/SACN_BLK

TCON21/CS10/VGH_ODD

TCON20/CS9/VGH_EVEN

TCON17/CS6/GCLK4

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25

LVA4P/LLV8P

Y24

LVA4N/LLV8N

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23

RLV3P/RED[7]

AE23

RLV3N/RED[6]

AE26

RLV0P/LVSYNC

AE25

RLV0N/LHSYNC

AF26

RLV1N/LCK

AF25

RLV2P/RED[9]

AE24

RLV1P/LDE

AF24

RLV2N/RED[8]

AF23

RLV4P/RED[5]

AD22

RLV4N/RED[4]

AE22

RLV5P/RED[3]

AF22

RLV5N/RED[2]

AD19
AE19
AD21
AE21
AF21
AD20
AE20
AF20

TCON16/WPWM

AF19

TCON12/DPM

AD18
AE18

TCON5/TP/SOE

AF18

AB22
AB23
AC23

TCON13/LEDON

AC22

AB16

NC_26

AA14

NC_19

AC15

NC_30

Y16

NC_15

AC16

NC_31

AC14

NC_29

AA16

NC_21

AA15

NC_20

Y10

NC_11

AA11

NC_17

AB15

NC_25

AB14

NC_24

S7_NON_DIVX & MS10

IC101-*10

LGE101 (S7 NON_TON/DiX/RM)

AE1

NC_48

AF16

NC_78

AF1

NC_64

AE3

NC_50

AD14

NC_45

AD3

NC_34

AF15

NC_77

AF2

NC_65

AE15

NC_62

AD2

NC_33

AD16

NC_47

AD15

NC_46

AE16

NC_63

AF3

NC_66

AF14

NC_76

AD1

NC_32

AD13

NC_44

AE14

NC_61

AE13

NC_60

AE4

NC_51

AD5

NC_36

AF4

NC_67

AD4

NC_35

AE2

NC_49

AF8

NC_71

AD9

NC_40

AE9

NC_56

AF9

NC_72

AE11

NC_58

AF6

NC_69

AE6

NC_53

AF11

NC_74

AD6

NC_37

AD12

NC_43

AE5

NC_52

AF12

NC_75

AF5

NC_68

AE12

NC_59

AE10

NC_57

AF7

NC_70

AD11

NC_42

AD7

NC_38

AD10

NC_41

AE7

NC_54

AF10

NC_73

AD8

NC_39

AE8

NC_55

Y11

NC_12

Y19

GND_105

LVACLKP/LLV6P/BLUE[3]
LVACLKN/LLV6N/BLUE[2]

LVA0P/LLV3P/BLUE[9]
LVA0N/LLV3N/BLUE[8]
LVA1P/LLV4P/BLUE[7]
LVA1N/LLV4N/BLUE[6]
LVA2P/LLV5P/BLUE[5]
LVA2N/LLV5N/BLUE[4]
LVA3P/LLV7P/BLUE[1]
LVA3N/LLV7N/BLUE[0]

LVBCLKP/LLV0P/GREEN[5]
LVBCLKN/LLV0N/GREEN[4]

LVB0P/RLV6P/RED[1]

LVB0N/RLV6N/RED[0]
LVB1P/RLV7P/GREEN[9]
LVB1N/RLV7N/GREEN[8]
LVB2P/RLV8P/GREEN[7]
LVB2N/RLV8N/GREEN[6]
LVB3P/LLV1P/GREEN[3]
LVB3N/LLV1N/GREEN[2]
LVB4P/LLV0P/GREEN[1]
LVB4N/LLV0N/GREEN[0]

TCON3/OE/GOE/GCLK2

TCON15/SCAN_BLK1
TCON18/CS7/GCLK5
TCON19/CS8/GCLK6
TCON11/CS5/HCON
TCON10/CS4/OPT_N
TCON9/CS3/OPT_P

TCON1/STV/GSP/VST

TCON14/SACN_BLK

TCON21/CS10/VGH_ODD

TCON20/CS9/VGH_EVEN

TCON17/CS6/GCLK4

S7_NON_DIVX & DD

IC101-*11

LGE101B-LF-1(S7 Non_Tcon/Divx/RM/MS10)

W26

AE1
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25

LVA4P/LLV8P

Y24

LVA4N/LLV8N

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23

RLV3P/RED[7]

AE23

RLV3N/RED[6]

AE26

RLV0P/LVSYNC

AE25

RLV0N/LHSYNC

AF26

RLV1N/LCK

AF25

RLV2P/RED[9]

AE24

RLV1P/LDE

AF24

RLV2N/RED[8]

AF23

RLV4P/RED[5]

AD22

RLV4N/RED[4]

AE22

RLV5P/RED[3]

AF22

RLV5N/RED[2]

AD19
AE19
AD21
AE21
AF21
AD20
AE20
AF20

TCON16/WPWM

AF19

TCON12/DPM

AD18
AE18

TCON5/TP/SOE

AF18

AB22
AB23
AC23

TCON13/LEDON

AC22

AB16

NC_26

AA14

NC_19

AC15

NC_30

Y16

NC_15

AC16

NC_31

AC14

NC_29

AA16

NC_21

AA15

NC_20

Y10

NC_11

AA11

NC_17

AB15

NC_25

AB14

NC_24

NC_48

AF16

NC_78

AF1

NC_64

AE3

NC_50

AD14

NC_45

AD3

NC_34

AF15

NC_77

AF2

NC_65

AE15

NC_62

AD2

NC_33

AD16

NC_47

AD15

NC_46

AE16

NC_63

AF3

NC_66

AF14

NC_76

AD1

NC_32

AD13

NC_44

AE14

NC_61

AE13

NC_60

AE4

NC_51

AD5

NC_36

AF4

NC_67

AD4

NC_35

AE2

NC_49

AF8

NC_71

AD9

NC_40

AE9

NC_56

AF9

NC_72

AE11

NC_58

AF6

NC_69

AE6

NC_53

AF11

NC_74

AD6

NC_37

AD12

NC_43

AE5

NC_52

AF12

NC_75

AF5

NC_68

AE12

NC_59

AE10

NC_57

AF7

NC_70

AD11

NC_42

AD7

NC_38

AD10

NC_41

AE7

NC_54

AF10

NC_73

AD8

NC_39

AE8

NC_55

Y11

NC_12

Y19

GND_105

LVACLKP/LLV6P/BLUE[3]
LVACLKN/LLV6N/BLUE[2]

LVA0P/LLV3P/BLUE[9]
LVA0N/LLV3N/BLUE[8]
LVA1P/LLV4P/BLUE[7]
LVA1N/LLV4N/BLUE[6]
LVA2P/LLV5P/BLUE[5]
LVA2N/LLV5N/BLUE[4]
LVA3P/LLV7P/BLUE[1]
LVA3N/LLV7N/BLUE[0]

LVBCLKP/LLV0P/GREEN[5]
LVBCLKN/LLV0N/GREEN[4]

LVB0P/RLV6P/RED[1]

LVB0N/RLV6N/RED[0]
LVB1P/RLV7P/GREEN[9]
LVB1N/RLV7N/GREEN[8]
LVB2P/RLV8P/GREEN[7]
LVB2N/RLV8N/GREEN[6]
LVB3P/LLV1P/GREEN[3]
LVB3N/LLV1N/GREEN[2]
LVB4P/LLV0P/GREEN[1]
LVB4N/LLV0N/GREEN[0]

TCON3/OE/GOE/GCLK2

TCON15/SCAN_BLK1
TCON18/CS7/GCLK5
TCON19/CS8/GCLK6
TCON11/CS5/HCON
TCON10/CS4/OPT_N
TCON9/CS3/OPT_P

TCON1/STV/GSP/VST

TCON14/SACN_BLK

TCON21/CS10/VGH_ODD

TCON20/CS9/VGH_EVEN

TCON17/CS6/GCLK4

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25

LVA4P/LLV8P

Y24

LVA4N/LLV8N

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23

RLV3P/RED[7]

AE23

RLV3N/RED[6]

AE26

RLV0P/LVSYNC

AE25

RLV0N/LHSYNC

AF26

RLV1N/LCK

AF25

RLV2P/RED[9]

AE24

RLV1P/LDE

AF24

RLV2N/RED[8]

AF23

RLV4P/RED[5]

AD22

RLV4N/RED[4]

AE22

RLV5P/RED[3]

AF22

RLV5N/RED[2]

AD19
AE19
AD21
AE21
AF21
AD20
AE20
AF20

TCON16/WPWM

AF19

TCON12/DPM

AD18
AE18

TCON5/TP/SOE

AF18

AB22
AB23
AC23

TCON13/LEDON

AC22

AB16

NC_26

AA14

NC_19

AC15

NC_30

Y16

NC_15

AC16

NC_31

AC14

NC_29

AA16

NC_21

AA15

NC_20

Y10

NC_11

AA11

NC_17

AB15

NC_25

AB14

NC_24

I2C

R140

+3.3V_Normal

R142

3.3K

R141

1K

1K

R143

3.3K

R144

2.2K

R145

2.2K

AMP_SDA

AMP_SCL

I2C_SDA

I2C_SCL

NEC_SDA
NEC_SCL

GP2_Saturn7M

FLASH/EEPROM/GPIO

DIMMING

A_DIM

PWM_DIM

SCAN_BLK2

SCAN_BLK1/OPC_OUT

C111

2.2uF

R156

10K

R157

100

NON_SCAN_CCFL_55"
R155
0

SCAN_CCFL_55"

R158

R159

SCAN

Ver. 1.3

1

LD650 Scan

100

SCAN

100

PWM0

PWM2

FRC_PWM1

FRC_PWM0

IF_AGC_SEL

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

LNA2_CTL

RF_SWITCH_CTL

BT_ON/OFF

3D_POWER_EN

/3D_FPGA_RESET

R201 100
R202 100
R203 100
R204 100

R210 100

3D

R213 100

3D

CK+_HDMI1
CK-_HDMI1
D0+_HDMI1
D0-_HDMI1
D1+_HDMI1
D1-_HDMI1
D2+_HDMI1
D2-_HDMI1
DDC_SDA_1
DDC_SCL_1
HPD1

CK+_HDMI2
CK-_HDMI2
D0+_HDMI2
D0-_HDMI2
D1+_HDMI2
D1-_HDMI2
D2+_HDMI2
D2-_HDMI2
DDC_SDA_2
DDC_SCL_2
HPD2

CK+_HDMI4

HDMI

CK-_HDMI4
D0+_HDMI4
D0-_HDMI4
D1+_HDMI4
D1-_HDMI4
D2+_HDMI4
D2-_HDMI4
DDC_SDA_4
DDC_SCL_4
HPD4

CK+_HDMI3
CK-_HDMI3
D0+_HDMI3
D0-_HDMI3
D1+_HDMI3
D1-_HDMI3
D2+_HDMI3
D2-_HDMI3
DDC_SDA_3
DDC_SCL_3
HPD3

CEC_REMOTE_S7

DSUB_HSYNC
DSUB_VSYNC

DSUB_R+
DSUB_R­DSUB_G+

DSUB

DSUB_G­DSUB_B+
DSUB_B-

SCART1_RGB/COMP1

SC1_ID

SC1_FB
SC1_R+/COMP1_Pr+
SC1_R-/COMP1_Pr-

SC1_G+/COMP1_Y+
SC1_G-/COMP1_Y-

SC1_B+/COMP1_Pb+

SC1_B-/COMP1_Pb-

SC1_SOG_IN

COMP2_Pr+

COMP2_Pr-

COMP2_Y+

COMP2

COMP2_Y-

COMP2_Pb+

COMP2_Pb-

TU_CVBS

SC1_CVBS_IN

AV_CVBS_IN

SIDEAV_CVBS_IN

CHB_CVBS_IN
AV_CVBS_IN2

CVBS In/OUT

DTV/MNT_VOUT

AV_CVBS_IN2

OLED

LCD

R214 1K

R215 1K

GIP

R295 1K

NON_GIP

R293 1K

+3.3V_Normal

FHD

R206 1K

R294 1K

100/120Hz LVDS

HD

R207 1K

R297 1K

50/60Hz LVDS

10K

R4026

R4023

C203

1000pF

OPT

TP211

R211 1K

R208 1K

MINI_LVDS

DDR_512MB

LVDS

DDR_256MB

R212 1K

R209 1K

R4024
R4025

10K

Close to MSTAR

FRC

R226 1K

NO_FRC

R227 1K

22

22
R228 33
R229 68
R230 33
R231 68
R232 33
R233 68
R234 0

R253 33
R254 68
R255
R256
R257 33
R258 68

R236 0

NON_EU

R237 33
R238 68
R239
R240
R241 33
R242 68
R243 0

R244 33
R245 33
R246 33
R4016 33
R248 33
R249 33
R250 33
R251 33

R252 68

MODEL OPTION

MODEL_OPT_0
MODEL_OPT_1
MODEL_OPT_2
MODEL_OPT_3

MODEL_OPT_4
MODEL_OPT_5
MODEL_OPT_6

C204 0.047uF
C205 0.047uF
C206 0.047uF
C207 0.047uF
C208 0.047uF
C209 0.047uF
C210 1000pF

C211 0.047uF
C212 0.047uF
C213

33

0.047uF

C214

68

0.047uF

0.047uF

C215

0.047uF

C216
C217 1000pF

C218 0.047uF
C219 0.047uF

33

C220 0.047uF
C221 0.047uF

68

C222 0.047uF
C223 0.047uF
C224 1000pF

C225 0.047uF
C226 0.047uF
C227 0.047uF
C4057 0.047uF
C229 0.047uF
C230 0.047uF
C231 0.047uF
C232 0.047uF

TP210

C233 0.047uF

PIN NAME

MODEL_OPT_0

MODEL_OPT_4

MODEL_OPT_1

MODEL_OPT_2

MODEL_OPT_3

MODEL_OPT_5

MODEL_OPT_6

LGE107D (S7M Divx_Non RM)

F1

A_RXCP

F2

A_RXCN

G2

A_RX0P

G3

A_RX0N

H3

A_RX1P

G1

A_RX1N

H1

A_RX2P

H2

A_RX2N

F5

DDCDA_DA/GPIO24

F4

DDCDA_CK/GPIO23

E6

HOTPLUGA/GPIO19

D3

B_RXCP

C1

B_RXCN

D1

B_RX0P

D2

B_RX0N

E2

B_RX1P

E3

B_RX1N

F3

B_RX2P

E1

B_RX2N

D4

DDCDB_DA/GPIO26

E4

DDCDB_CK/GPIO25

D5

HOTPLUGB/GPIO20

AA2

C_RXCP

AA1

C_RXCN

AB1

C_RX0P

AA3

C_RX0N

AB3

C_RX1P

AB2

C_RX1N

AC2

C_RX2P

AC1

C_RX2N

AB4

DDCDC_DA/GPIO28

AA4

DDCDC_CK/GPIO27

AC3

HOTPLUGC/GPIO21

A2

D_RXCP

A3

D_RXCN

B3

D_RX0P

A1

D_RX0N

B1

D_RX1P

B2

D_RX1N

C2

D_RX2P

C3

D_RX2N

B4

DDCDD_DA/GPIO30

C4

DDCDD_CK/GPIO29

E5

HOTPLUGD/GPIO22

D6

CEC/GPIO5

G5

HSYNC0

G6

VSYNC0

K1

RIN0P

L3

RIN0M

K3

GIN0P

K2

GIN0M

J3

BIN0P

J2

BIN0M

J1

SOGIN0

G4

HSYNC1

H6

VSYNC1

K5

RIN1P

K4

RIN1M

J4

GIN1P

K6

GIN1M

H4

BIN1P

J6

BIN1M

J5

SOGIN1

H5

HSYNC2

N3

RIN2P

N2

RIN2M

M2

GIN2P

M1

GIN2M

L2

BIN2P

L1

BIN2M

M3

SOGIN2

N4

CVBS0P

N6

CVBS1P

L4

CVBS2P

L5

CVBS3P

L6

CVBS4P

M4

CVBS5P

M5

CVBS6P

K7

CVBS7P

M6

CVBS_OUT1

M7

CVBS_OUT2

N5

VCOM0

MODEL OPTION

PIN NO.

G19

E18

C5

F7

B6

F9 LCDOLED

IC101

S7M_DIVX & MS10

HIGH

FRC

100/120Hz LVDS

MINI LVDS

DDR_512MB

FHD

GIP NON_GIPD18

SSIF/SIFP
SSIF/SIFM

IFAGC

RF_TAGC

TGPIO0/UPGAIN

TGPIO1/DNGAIN
TGPIO2/I2C_CLK
TGPIO3/I2C_SDA

XTALIN

XTALOUT

SPDIF_IN/GPIO177

SPDIF_OUT/GPIO178

DM_P0
DP_P0

DM_P1
DP_P1

I2S_IN_BCK/GPIO175

I2S_IN_SD/GPIO176
I2S_IN_WS/GPIO174

I2S_OUT_BCK/GPIO181
I2S_OUT_MCK/GPIO179

I2S_OUT_SD/GPIO182
I2S_OUT_SD1/GPIO183
I2S_OUT_SD2/GPIO184
I2S_OUT_SD3/GPIO185

I2S_OUT_WS/GPIO180

LINE_IN_0L
LINE_IN_0R
LINE_IN_1L
LINE_IN_1R
LINE_IN_2L
LINE_IN_2R
LINE_IN_3L
LINE_IN_3R
LINE_IN_4L
LINE_IN_4R
LINE_IN_5L
LINE_IN_5R

LINE_OUT_0L
LINE_OUT_2L
LINE_OUT_3L
LINE_OUT_0R
LINE_OUT_2R
LINE_OUT_3R

MIC_DET_IN

MICCM
MICIN

AUCOM

HP_OUT_1L
HP_OUT_1R

ET_RXD0
ET_TXD0

ET_RXD1
ET_TXD1

ET_REFCLK

ET_TX_EN

ET_MDC

ET_MDIO

ET_CRS

AVLINK

IRINT

TESTPIN

RESET

U3_RESET

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

LOW

NO FRC

50/60Hz LVDS

LVDS

DDR_256MB

HD

W2

VIFP

W1

VIFM

V2

IP

V1

IM

Y2
Y1

U3

QP

V3

QM

Y5
Y4

U1
U2
R3
T3

T2
T1

G14
G13

B7
A7

AF17
AE17

F14
F13
F15

D20
E20
D19
F18
E18
D18
E19

N1
P3
P1
P2
P4
P5
R6
T6
U5
V5
U6
V6

U4
W3
W4
V4
Y3
W5

R4
T5
R5

T4

P7

VRM

R7

VAG

P6

VRP

R1
R2

E21
E22

D21
F21

E23
D22
F22
D23
F23

F8
G8
K8
A4
Y17

NO_FRC : LOW LOW
U3_INTERNAL : HIGH LOW
U3_EXTERNAL : HIGH HIGH
PWIZ TCON with LG FRC : HIGH HIGH

TP201
TP202

TP203
TP204

R4032

TP205

R4033

DEMOD_OPT
DEMOD_OPT

R287

R4028

R296 100

R4029

C236 2.2uF
C237

2.2uF
C238 2.2uF
C239

2.2uF
C4059 2.2uF
C4060

2.2uF
C242

2.2uF
C243 2.2uF
C244 2.2uF
C245 2.2uF
C246

2.2uF

2.2uF

2.2uF

TP206

TP207
TP208

TP209

22

5.6uH

OPT

2.2uF

OPT

C249

4.7uF

OPT

R298 100

FRC

R205

10K

C247

OPT

C234
C235

OPT

CM2012F5R6KT
L203
L205 5.6uH

CM2012F5R6KT

ETHERNET

R278 33

ETHERNET

R280 33

ETHERNET

R282 33

ETHERNET

R283 33

ETHERNET

R284 33

ETHERNET

R285 33

FRC

R4018

10K

R4017

OPT

0
0

R291 22
R292 22

1M

OPT

0

COMP2_DET

0

C253

1uF

EPHY_RXD0
EPHY_TXD0

EPHY_RXD1
EPHY_TXD1

EPHY_REFCLK
EPHY_EN
EPHY_MDC
EPHY_MDIO
EPHY_CRS_DV

+3.3V_Normal

OPT_0 OPT_4

R288 100
R289 100

C250 0.1uF
C251 0.1uF

ANALOG SIF

Close to MSTAR

+3.3V_Normal

X201
24MHz

NEC_SDA

NEC_SCL

OPT

MODEL_OPT_4
MODEL_OPT_5

C256

0.1uF

IR

FRC_RESET

Close to MSTAR

C257 0.1uF
C258 0.1uF

R4002 47
R4003 47

L227

BLM18PG121SN1D

C4064

0.1uF

AMP_SCL
AMP_SDA

TU/DEMOD_I2C

C261 27pF

C262 27pF

BLM18SG121TN1D

C263
10uF

RMII For Ethernet

10K

R4006

L202

C268

4.7uF

DEMOD_SCL
DEMOD_SDA
TU_SCL
TU_SDA

SC1/COMP1_L_IN
SC1/COMP1_R_IN
AV_L_IN
AV_R_IN
SIDEAV_L_IN
SIDEAV_R_IN
COMP2_L_IN
COMP2_R_IN
PC_L_IN
PC_R_IN

RSDS Power OPT

L213

+2.5V_Normal

OPT

C264

R4019
1K

BLM18PG121SN1D

L214

BLM18PG121SN1D

VDD33

IF_P_MSTAR
IF_N_MSTAR

1000pF

Close to MSTAR

R4020

10K

C4065

0.022uF
16V

AMP_SDA
SPDIF_OUT

B/T USB

BT_DM
BT_DP

SIDE_USB_DM
SIDE_USB_DP

SIDE USB

AUDIO IN

C272

4.7uF

SOC_RESET

VDD_RSDS:88mA

VDD_RSDS

OPT

FRC

C4005

0.1uF

DTV_IF

TU_SIF

AUD_SCK
AUD_MASTER_CLK
AUD_LRCH
AMP_SCL

AUD_LRCK

BT_LOUT
SCART1_Lout

SCART1_Rout

H/P OUT

HP_LOUT
HP_ROUT

IF_AGC_MAIN

I2S_I/F

+1.26V_VDDC

AUDIO OUT

10uFC275

10uFC276

10uFC228

+3.3V_Normal

L204
BLM18PG121SN1D

C4043 0.1uF

C4044 0.1uF

AVDD_MEMPLL:24mA

VDD33

L206
BLM18PG121SN1D

+3.3V_Normal

L207
BLM18PG121SN1D

Normal 2.5V

+2.5V_Normal

+2.5V_Normal

+1.5V_DDR

+1.5V_FRC_DDR

RSDS Power OPT

+1.26V_VDDC

L228

BLM18SG700TN1D

L226

BLM18SG700TN1D

C280 0.1uF

C277 0.1uF

VDD33

10uFC284

FRC_LPLL:13mA

FRC_LPLL

VDD33_DVI:163mA

VDD33_DVI

C287
10uF

L211

BLM18PG121SN1D

L212

BLM18PG121SN1D

AU25:10mA

L209

BLM18PG121SN1D

C281

C278

10uF

FRC

L210

BLM18PG121SN1D

FRC

FRC

10uF

C282

C279

MIU1VDDC

C4063 10uF

C283 0.1uF

C292 0.1uF

C299 0.1uF

Normal Power 3.3V

VDD33_T/VDDP/U3_VD33_2:47mA

10uFC293

10uFC4001

C4007 0.1uF

VDD33

L215

BLM18PG121SN1D

C286 0.1uF

C4016 0.1uF

C4008

C4002

0.1uF

C294

0.1uF

AVDD2P5

C289 10uF

C295 0.1uF

AU25

C296 0.1uF

DDR3 1.5V

AVDD_DDR0:55mA

10uF

AVDD_DDR_FRC:55mA

10uF

C4056 0.1uF

C290

FRC

C291

C4046

0.1uF

0.1uF

0.1uF

C297

FRC

C298

MIU0VDDC

C4066 10uF

AVDD_DDR0

C4003

0.1uF

FRC

0.1uF
C4004

VDDC 1.26V

C4013 0.1uF

C4011 0.1uF

C4006 0.1uF

C4012 0.1uF

C4014 0.1uF

C4020 0.1uF

AU33:31mA

AU33

C4015

0.1uF

FRC_MPLL:4mA

AVDD_DMPLL

L217
BLM18PG121SN1D

C288

0.1uF

C4017

0.1uF

0.1uF

AVDD_DMPLL/AVDD_NODIE:7.362mA

AVDD2P5/ADC2P5:162mA

AVDD2P5

R4022
0

1/10W
5%

+2.5V_Normal

L219

BLM18PG121SN1D

AVDD25_PGA:13mA

AVDD_DDR0

0

5%

1/10W

C4009

FRC

C4010

0.1uF
C4042

AVDD_DDR0

FRC

0.1uF

C240

C4018

10uF

0.1uF

R40141K1/16W

R40151K1/16W

0.1uF

+1.26V_VDDC

0.1uF

0.1uF

C4062 0.1uF

C4019 0.1uF

C4024 0.1uF

C4025 0.1uF

+2.5V_Normal

C4023 0.1uF

FRC_VDD33_DDR:50mA

VDD33

ADC2P5

C4026 0.1uF

AVDD25_PGA

C4027 0.1uF

AVDD_DDR1:55mA

R4027

C4022

C4028

0.1uF

10uF

1%

1%

C241

0.1uF

L225

BLM18SG700TN1D

C4061 10uF

C4031 0.1uF

FRC_AVDD:60mA

L221

BLM18PG121SN1D

FRC

FRC_VDD33_DDR

L222

BLM18PG121SN1D

AVDD_DDR1

C4032

0.1uF

C4036

MVREFAVDD_DDR_FRC

FRCVDDC

C4058 0.1uF

FRC_AVDD

C4040 0.1uF

C4041 0.1uF

VDD33

C4038

0.1uF

0.1uF

GP2_Saturn7M

+1.26V_VDDC

MIU0VDDC
MIU1VDDC

FRCVDDC

C4045 1uF

ADC2P5

AU25

AVDD2P5
AVDD2P5

AVDD25_PGA

AVDD_DMPLL

VDD33_DVI

AVDD_DMPLL

AU33

VDD33

VDD_RSDS

FRC_AVDD
FRC_LPLL

FRC_VDD33_DDR

AVDD_DDR0
C285 0.1uF

AVDD_DDR1

AVDD_DDR_FRC

MVREF

MAIN_2

VDDC : 2026mA

LGE107D (S7M Divx_Non RM)

H11
H12
H13
H14
H15
J12
J13
J14
J15
J16
L18

H16
K19

L19
M18
M19
N18
N19
N20
P18
P19
P20

Y12

J11

L7

H7
J7
J8

L8

W15
Y15

U8

M8

N9
P9
N8
P8

T7
U7

T9

R8
R9
T8

V20
W20

U19
U20
V19

W19
U18
T20

Y14

R19
W14

D15
D16
E15
E16
E17

F16
F17
G16
G17
H17

AB11
AB12
AC11
AC12
AA12

G15

Y7
Y8

IC101

S7M_DIVX & MS10

VDDC_1
VDDC_2
VDDC_3
VDDC_4
VDDC_5
VDDC_6
VDDC_7
VDDC_8
VDDC_9
VDDC_10
VDDC_11

A_DVDD
B_DVDD

FRC_VDDC_0
FRC_VDDC_1
FRC_VDDC_2
FRC_VDDC_3
FRC_VDDC_4
FRC_VDDC_5
FRC_VDDC_6
FRC_VDDC_7
FRC_VDDC_8

U3_DVDD_DDR

AVDD1P2
DVDD_NODIE

AVDD2P5_ADC_1
AVDD2P5_ADC_2
AVDD25_REF

AVDD_AU25

PVDD_1
PVDD_2

AVDD25_PGA

AVDD_NODIE

AVDD_DVI_1
AVDD_DVI_2
AVDD3P3_CVBS
AVDD_DMPLL

AVDD_AU33
AVDD_EAR33

AVDD33_T

VDDP_1
VDDP_2
VDDP_3

FRC_VD33_2_1
FRC_VD33_2_2

FRC_AVDD_RSDS_1
FRC_AVDD_RSDS_2
FRC_AVDD_RSDS_3

FRC_AVDD
FRC_AVDD_LPLL
FRC_AVDD_MPLL

FRC_VDD33_DDR

AVDD_MEMPLL
FRC_AVDD_MEMPLL

AVDD_DDR0_D_1
AVDD_DDR0_D_2
AVDD_DDR0_D_3
AVDD_DDR0_D_4
AVDD_DDR0_C

AVDD_DDR1_D_1
AVDD_DDR1_D_2
AVDD_DDR1_D_3
AVDD_DDR1_D_4
AVDD_DDR1_C

FRC_AVDD_DDR_D_1
FRC_AVDD_DDR_D_2
FRC_AVDD_DDR_D_3
FRC_AVDD_DDR_D_4
FRC_AVDD_DDR_C

MVREF

NC_1
NC_2

GND_1
GND_2
GND_3
GND_4
GND_5
GND_6
GND_7
GND_8

GND_9
GND_10
GND_11
GND_12
GND_13
GND_14
GND_15
GND_16
GND_17
GND_18
GND_19
GND_20
GND_21
GND_22
GND_23
GND_24
GND_25
GND_26
GND_27
GND_28
GND_29
GND_30
GND_31
GND_32
GND_33
GND_34
GND_35
GND_36
GND_37
GND_38
GND_39
GND_40
GND_41
GND_42
GND_43
GND_44
GND_45
GND_46
GND_47
GND_48
GND_49
GND_50
GND_51
GND_52
GND_53
GND_54
GND_55
GND_56
GND_57
GND_58
GND_59
GND_60
GND_61
GND_62
GND_63
GND_64
GND_65
GND_66
GND_67
GND_68
GND_69
GND_70
GND_71
GND_72
GND_73
GND_74
GND_75
GND_76
GND_77
GND_78
GND_79
GND_80
GND_81
GND_82
GND_83
GND_84
GND_85
GND_86
GND_87
GND_88
GND_89
GND_90
GND_91
GND_92
GND_93
GND_94
GND_95
GND_96
GND_97
GND_98
GND_99

GND_100
GND_101
GND_102
GND_103
GND_104
GND_105
GND_106
GND_107
GND_108
GND_109
GND_110

GND_FU

PGA_VCOM

+1.26V_VDDC

G18
H9
H10
H18
H19
J10
J17
J18
J19
K9
K10
K11
K12
K13
K14
K15
K16
K17
K18
L9
L10
L11
L12
L13
L14
L15
L16
L17
M9
M10
M11
M12
M13
M14
M15
M16
M17
N10
N11
N12
N13
N14
N15
N16
N17
P10
P11
P12
P13
P14
P15
P16
P17
R10
R11
R12
R13
R14
R15
R16
R17
R18
T10
T11
T12
T13
T14
T15
T16
T17
T18
T19
U10
U11
U12
U13
U14
U15
U16
U17
V7
V8
V9
V10
V11
V12
V13
V14
V15
V16
V17
V18
W7
W8
W9
W10
W11
W12
W13
W16
W17
W18
Y13
Y18
AA13
AB13
AC13
D17
H23
AF13
J9

L223

BLM18SG121TN1D

U9

Ver. 1.4

2

VCC1.5V_U3_DDR

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

C301

10uF

Close to DDR Power Pin

VCC1.5V_U3_DDR

R301

1K 1%

R302

1K 1%

C302

CLose to DDR3

C-MVREFCA

C-MVREFDQ

R303

240

1%

VCC1.5V_U3_DDR

DDR3 1.5V By CAP - Place these Caps near Memory

C303

0.1uF

C304

0.1uF

C305

1000pF

0.1uF

C306

C-MVREFDQ

0.1uF

C307

0.1uF

C308

0.1uF

C309

0.1uF

0.1uF

C310

C311

VCC1.5V_U3_DDR

R304

1K 1%

R305

1K 1%

0.1uF

C312

CLose to Saturn7M IC

IC301

H5TQ1G63BFR-12C

FRC_DDR_1600

M8

VREFCA

H1

VREFDQ

L8

ZQ

B2

VDD_1

D9

VDD_2

G7

VDD_3

K2

VDD_4

K8

VDD_5

N1

VDD_6

N9

VDD_7

R1

VDD_8

R9

VDD_9

A1

VDDQ_1

A8

VDDQ_2

C1

VDDQ_3

C9

VDDQ_4

D2

VDDQ_5

E9

VDDQ_6

F1

VDDQ_7

H2

VDDQ_8

H9

VDDQ_9

J1

NC_1

J9

NC_2

L1

NC_3

L9

NC_4

T7

NC_6

A9

VSS_1

B3

VSS_2

E1

VSS_3

G8

VSS_4

J2

VSS_5

J8

VSS_6

M1

VSS_7

M9

VSS_8

P1

VSS_9

P9

VSS_10

T1

VSS_11

T9

VSS_12

B1

VSSQ_1

B9

VSSQ_2

D1

VSSQ_3

D8

VSSQ_4

E2

VSSQ_5

E8

VSSQ_6

F9

VSSQ_7

G1

VSSQ_8

G9

VSSQ_9

A10/AP

A12/BC

RESET

DQSL
DQSL

DQSU
DQSU

DQL0
DQL1
DQL2
DQL3
DQL4
DQL5
DQL6
DQL7

DQU0
DQU1
DQU2
DQU3
DQU4
DQU5
DQU6
DQU7

N3

A0

P7

A1

P3

A2

N2

A3

P8

A4

P2

A5

R8

A6

R2

A7

T8

A8

R3

A9

L7
R7

A11

N7
T3

A13

M7

A15

M2

BA0

N8

BA1

M3

BA2

J7

CK

K7

CK

K9

CKE

L2

CS

K1

ODT

J3

RAS

K3

CAS

L3

WE

T2

F3
G3

C7
B7

E7

DML

D3

DMU

E3
F7
F2
F8
H3
H8
G2
H7

D7
C3
C8
C2
A7
A2
B8
A3

C313

0.1uF

0.1uF

C314

C315

0.1uF

1000pF

C316

C-MA0
C-MA1
C-MA2
C-MA3
C-MA4
C-MA5
C-MA6
C-MA7
C-MA8

C-MA9
C-MA10
C-MA11
C-MA12

C-MBA0
C-MBA1
C-MBA2

0.1uF

C317

C-MVREFCA

OPT

R306

C-MODT
C-MRASB
C-MCASB

C-MWEB

C-MRESETB

C-MDQSL

C-MDQSLB

C-MDQSU

C-MDQSUB

C-MDML

C-MDMU

C-MDQL0
C-MDQL1
C-MDQL2
C-MDQL3
C-MDQL4
C-MDQL5
C-MDQL6
C-MDQL7

C-MDQU0
C-MDQU1
C-MDQU2
C-MDQU3
C-MDQU4
C-MDQU5
C-MDQU6
C-MDQU7

150

0.1uF

C318

R333
10K

0.1uF

0.1uF

C319

C-MCK

C-MCKB
C-MCKE

VCC1.5V_U3_DDR

C320

0.1uF

C321

0.1uF

C322

C-MRESETB

0.1uF

C323

C-MA9
C-MA2
C-MA0

C-MBA2

C-MA8
C-MA6
C-MA4

C-MBA1

C-MA10
C-MA12

C-MA1

C-MA11

C-MA3
C-MA5
C-MA7

C-MCK

C-MCKB

C-MCKE

C-MRASB

C-MCASB

C-MODT
C-MWEB
C-MBA0

C-MDQSL

C-MDQSLB

C-MDQSU

C-MDQSUB

C-MDMU

C-MDQL7
C-MDQL3
C-MDQL1

C-MDML

C-MDQL0
C-MDQL2
C-MDQL6
C-MDQL4

C-MDQL5

C-MDQU2
C-MDQU6
C-MDQU0
C-MDQU4

C-MDQU7
C-MDQU1
C-MDQU5
C-MDQU3

0.1uF

AR301

AR302

AR303

AR304

10

10

10

10

R307

10

R308

10
R309

10
R310

10

AR305

R311

R312

AR306

AR307

AR308

AR309

10

10

R313

10

R314

10

R315

10

10

10

10
R316

10

10

10

+1.5V_FRC_DDR

C-TMBA2

C-TMRESETB

C-TMCKB

C-TMCKE

C-TMRASB

C-TMDQSL

C-TMDQSLB

C-TMDQSU

C-TMDQSUB

L301

C-TMA9
C-TMA2
C-TMA0

C-TMA8
C-TMA6
C-TMA4

C-TMBA1

C-TMA10
C-TMA12

C-TMA1

C-TMA11

C-TMA3
C-TMA5
C-TMA7

C-TMCK

C-TMCASB

C-TMODT
C-TMWEB
C-TMBA0

C-TMDMU

C-TMDQL7
C-TMDQL3
C-TMDQL1

C-TMDML

C-TMDQL0
C-TMDQL2
C-TMDQL6
C-TMDQL4

C-TMDQL5

C-TMDQU2
C-TMDQU6
C-TMDQU0
C-TMDQU4

C-TMDQU7
C-TMDQU1
C-TMDQU5
C-TMDQU3

C324
10uF
10V

VCC1.5V_U3_DDR

C325

0.1uF
16V

C-TMA0
C-TMA1
C-TMA2
C-TMA3
C-TMA4
C-TMA5
C-TMA6
C-TMA7
C-TMA8

C-TMA9
C-TMA10
C-TMA11
C-TMA12

C-TMBA0
C-TMBA1
C-TMBA2

C-TMCK
C-TMCKE
C-TMCKB

C-TMODT

C-TMRASB
C-TMCASB

C-TMWEB

C-TMRESETB

C-TMDQSL

C-TMDQSLB

C-TMDQSU

C-TMDQSUB

C-TMDML
C-TMDMU

C-TMDQL0
C-TMDQL1
C-TMDQL2
C-TMDQL3
C-TMDQL4
C-TMDQL5
C-TMDQL6
C-TMDQL7

C-TMDQU0
C-TMDQU1
C-TMDQU2
C-TMDQU3
C-TMDQU4
C-TMDQU5
C-TMDQU6
C-TMDQU7

R317

IC301-*1

H5TQ1G63BFR-H9C

FRC_DDR_1333

N3

A0

P7

A1

P3

A2

N2

A3

P8

A4

P2

A5

R8

A6

R2

A7

T8

A8

R3

A9

L7

A10/AP

R7

A11

N7

A12/BC

T3

A13

M7

A15

M2

FRC_CONF0
FRC_CONF1

FRC_PWM1

FRC_PWM0

BA0

N8

BA1

M3

BA2

J7

CK

K7

CK

K9

CKE

L2

CS

K1

ODT

J3

RAS

K3

CAS

L3

WE

T2

RESET

F3

DQSL

G3

DQSL

C7

DQSU

B7

DQSU

E7

DML

D3

DMU

E3

DQL0

F7

DQL1

F2

DQL2

F8

DQL3

H3

DQL4

H8

DQL5

G2

DQL6

H7

DQL7

D7

DQU0

C3

DQU1

C8

DQU2

C2

DQU3

A7

DQU4

A2

DQU5

B8

DQU6

A3

DQU7

S7M_DIVX & MS10

LGE107D (S7M Divx_Non RM)

AE1

FRC_DDR3_A0/DDR2_NC

AF16

FRC_DDR3_A1/DDR2_A6

AF1

FRC_DDR3_A2/DDR2_A7

AE3

FRC_DDR3_A3/DDR2_A1

AD14

FRC_DDR3_A4/DDR2_CASZ

AD3

FRC_DDR3_A5/DDR2_A10

AF15

FRC_DDR3_A6/DDR2_A0

AF2

FRC_DDR3_A7/DDR2_A5

AE15

FRC_DDR3_A8/DDR2_A2

AD2

FRC_DDR3_A9/DDR2_A9

AD16

FRC_DDR3_A10/DDR2_A11

AD15

FRC_DDR3_A11/DDR2_A4

AE16

FRC_DDR3_A12/DDR2_A8

AF3

FRC_DDR3_BA0/DDR2_BA2

AF14

FRC_DDR3_BA1/DDR2_ODT

AD1

FRC_DDR3_BA2/DDR2_A12

AD13

FRC_DDR3_MCLK/DDR2_MCLK

AE14

FRC_DDR3_CKE/DDR2_RASZ

AE13

FRC_DDR3_MCLKZ/DDR2_MCLKZ

AE4

FRC_DDR3_ODT/DDR2_BA1

AD5

FRC_DDR3_RASZ/DDR2_WEZ

AF4

FRC_DDR3_CASZ/DDR2_CKE

AD4

FRC_DDR3_WEZ/DDR2_BA0

AE2

FRC_DDR3_RESETB/DDR2_A3

AF8

FRC_DDR3_DQSL/DDR2_DQS0

AD9

FRC_DDR3_DQSLB/DDR2_DQSB0

AE9

FRC_DDR3_DQSU/DDR2_DQS1

AF9

FRC_DDR3_DQSUB/DDR2_DQSB1

AE11

FRC_DDR3_DML/DDR2_DQ7

AF6

FRC_DDR3_DMU/DDR2_DQ11

AE6

FRC_DDR3_DQL0/DDR2_DQ6

AF11

FRC_DDR3_DQL1/DDR2_DQ0

AD6

FRC_DDR3_DQL2/DDR2_DQ1

AD12

FRC_DDR3_DQL3/DDR2_DQ2

AE5

FRC_DDR3_DQL4/DDR2_DQ4

AF12

FRC_DDR3_DQL5/DDR2_NC

AF5

FRC_DDR3_DQL6/DDR2_DQ3

AE12

FRC_DDR3_DQL7/DDR2_DQ5

AE10

FRC_DDR3_DQU0/DDR2_DQ8

AF7

FRC_DDR3_DQU1/DDR2_DQ14

AD11

FRC_DDR3_DQU2/DDR2_DQ13

AD7

FRC_DDR3_DQU3/DDR2_DQ12

AD10

FRC_DDR3_DQU4/DDR2_DQ15

AE7

FRC_DDR3_DQU5/DDR2_DQ9

AF10

FRC_DDR3_DQU6/DDR2_DQ10

AD8

FRC_DDR3_DQU7/DDR2_DQM1

AE8

820

FRC_DDR3_NC/DDR2_DQM0

Y11

FRC_REXT

Y19

FRC_TESTPIN

IC101

A4P/RLV5P/GREEN[9]
A4M/RLV5N/GREEN[8]

BCKP/TCON13/GREEN[1]
BCKM/TCON12/GREEN[0]

B0P/RLV6P/GREEN[7]
B0M/RLV6N/GREEN[6]
B1P/RLV7P/GREEN[5]
B1M/RLV7N/GREEN[4]
B2P/RLV8P/GREEN[3]
B2M/RLV8N/GREEN[2]
B3P/TCON11/BLUE[9]
B3M/TCON10/BLUE[8]

GPIO0/TCON15/HSYNC/VDD_ODD

GPIO1/TCON14/VSYNC/VDD_EVEN

GPIO2/TCON7/LDE/GCLK4
GPIO3/TCON6/LCK/GCLK2

ACKP/RLV3P/RED[3]
ACKM/RLV3N/RED[2]

A0P/RLV0P/RED[9]
A0M/RLV0N/RED[8]
A1P/RLV1P/RED[7]
A1M/RLV1N/RED[6]
A2P/RLV2P/RED[5]
A2M/RLV2N/RED[4]
A3P/RLV4P/RED[1]
A3M/RLV4N/RED[0]

B4P/TCON9/BLUE[7]
B4M/TCON8/BLUE[6]

CCKP/LLV3P

CCKM/LLV3N
C0P/LLV0P/BLUE[5]
C0M/LLV0N/BLUE[4]
C1P/LLV1P/BLUE[3]
C1M/LLV1N/BLUE[2]
C2P/LLV2P/BLUE[1]
C2M/LLV2N/BLUE[0]

C3P/LLV4P
C3M/LLV4N
C4P/LLV5P
C4M/LLV5N

DCKP/TCON5

DCKM/TCON4

D0P/LLV6P
D0M/LLV6N
D1P/LLV7P
D1M/LLV7N
D2P/LLV8P
D2M/LLV8N
D3P/TCON3
D3M/TCON2
D4P/TCON1
D4M/TCON0

FRC_GPIO0/UART_RX

FRC_GPIO1
FRC_GPIO3

FRC_GPIO8

FRC_GPIO9/UART_TX

FRC_GPIO10

FRC_I2CM_DA
FRC_I2CM_CK

FRC_I2CS_DA
FRC_I2CS_CK

FRC_PWM0
FRC_PWM1

W26
W25
U26
U25
U24
V26
V25
V24
W24
Y26
Y25
Y24

AC26
AC25
AA26
AA25
AA24
AB26
AB25
AB24
AC24
AD26
AD25
AD24

AD23
AE23
AE26
AE25
AF26
AF25
AE24
AF24
AF23
AD22
AE22
AF22

AD19
AE19
AD21
AE21
AF21
AD20
AE20
AF20
AF19
AD18
AE18
AF18

AB22
AB23
AC23
AC22

AB16
AA14
AC15

Y16
AC16
AC14

AA16
AA15

Y10
AA11

AB15
AB14

R300 0

OPT

TP301

0

0

TP302

R332

RXBCK+
RXBCK­RXB0+
RXB0­RXB1+
RXB1­RXB2+
RXB2­RXB3+
RXB3­RXB4+
RXB4-

RXACK+
RXACK­RXA0+
RXA0­RXA1+
RXA1­RXA2+
RXA2­RXA3+
RXA3­RXA4+
RXA4-

RXCCK+
RXCCK­RXC0+
RXC0­RXC1+
RXC1­RXC2+
RXC2­RXC3+
RXC3­RXC4+
RXC4-

RXDCK+
RXDCK­RXD0+
RXD0­RXD1+
RXD1­RXD2+
RXD2­RXD3+
RXD3­RXD4+
RXD4-

UART_FRC_RX
FRC_CONF0

FRC_CONF1

UART_FRC_TX

R327
R328

0

R334 22
R335

R326
R331

FRC_PWM0
FRC_PWM1

V_SYNC

R336 0

MINI_LVDS

OPT

22

OPT

22
22

FRC
FRC

GVDD_ODD
GVDD_EVEN
GCLK4
GCLK2

FRC_SDA
FRC_SCL

I2C_SDA
I2C_SCL

DPM_A

<U3 CHIP Config>

(FRC_CONF0)

HIGH : I2C ADR = B8
LOW : I2C ADR = B4

(FRC_CONF1,FRC_PWM1, FRC_PWM0)

3’d5 : boot from internal SRAM
3’d6 : boot from EEPROM
3’d7 : boot form SPI flash

+3.3V_Normal

R322

1K

R323

R321

1K

1K

R320

1K

OPT

OPT

R325

R324

R318

R319

1K

1K

1K

1K

OPT

OPT

VREFCA

VREFDQ

VDD_1
VDD_2
VDD_3
VDD_4
VDD_5
VDD_6
VDD_7
VDD_8
VDD_9

VDDQ_1
VDDQ_2
VDDQ_3
VDDQ_4
VDDQ_5
VDDQ_6
VDDQ_7
VDDQ_8
VDDQ_9

NC_1
NC_2
NC_3
NC_4
NC_6

VSS_1
VSS_2
VSS_3
VSS_4
VSS_5
VSS_6
VSS_7
VSS_8

VSS_9
VSS_10
VSS_11
VSS_12

VSSQ_1
VSSQ_2
VSSQ_3
VSSQ_4
VSSQ_5
VSSQ_6
VSSQ_7
VSSQ_8
VSSQ_9

M8

H1

L8

ZQ

B2
D9
G7
K2
K8
N1
N9
R1
R9

A1
A8
C1
C9
D2
E9
F1
H2
H9

J1
J9
L1
L9
T7

A9
B3
E1
G8
J2
J8
M1
M9
P1
P9
T1
T9

B1
B9
D1
D8
E2
E8
F9
G1
G9

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

DDR3(FRC)

Ver. 1.4

3

RL_ON

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

+3.5V_ST

C401

100uF

16V

+12V/+15V

C402

100uF

16V

R401

10K

0.1uF

C

Q401

B

2SC3052

E

L404

MLB-201209-0120P-N2

C406

0.1uF
16V

L402

MLB-201209-0120P-N2

C404

16V

<OS MODULE PIN MAP>

PIN No

LGD(PSU)

or LIPS

INV_ON

18

VBR-A

20

22

PWM_DIM

Err_out

24

GND

23

+3.5V_ST

C407

0.1uF
16V

PWM_DIM

INV_ON

FROM LIPS & POWER B/D

RT1P141C-T112

Q402

R406

4.7K

C408

0.1uF
16V

CMO

A-DIM

NC

GND

3

1

R476

0

2

POWER_23_GND

NORMAL_EXPEPT_32

R478

AUO

INV_ON

INV_ON

Err_out

NC

PWM_DIM

GND GND GND

OLP

P403

FW20020-24S

PWR ON

24V
GND
GND

3.5V

3.5V
GND
GND
12V
12V
12V

GND/P.DIM2

C412

0.1uF

0

POWER_23_SCAN_BLK2

C484

1uF

SCAN_BLK2

SHARP
(PSU) (PSU)(PSU)(PSU)

52/60:ERROR

26/32HD:NC

26/32/52:PWM

60:NC

26/32/52:GND

60:PWM

1

1

1
3

3

3
5

5

5
7

7

7
9

9

9
11

11

11
13

13

13
15

15

15
17

17

17
19

19

19
21

21 22

21 22
23

23 24

23 24

OPT

16V

25V

OPT

IPS-@

INV_ON

Err_out

PWM_DIM

NORMAL_32

P404
FM20020-24

2

2

2
4

4

4
6

6

6
8

8

8

10

10

10
12

12

12
14

14

14
16

16

16
18

18

18
20

20

20
22
24

25

25

SLIM_32~52
P401

SMAW200-H24S2

NC

24V
24V
GND
GND

3.5V

3.5V
GND
GND/V-sync
INV ON
A.DIM
P.DIM1
Err OUT

POWER_24_GND

MLB-201209-0120P-N2

POWER_16_GND

R475

0

L407

C418

0.1uF
50V

POWER_16_V_SYNC

R477
0

POWER_18_INV_CTL

R415
100

R425
100

R412 0

POWER_24_INV_CTL

POWER_20_PWM_DIM

POWER_24_PWM_DIM

0R472

0R471

POWER_22_PWM_DIM

OPT

POWER_20_ERROR_OUT

POWER_24_ERROR_OUT

R479
0

C416

0.1uF
16V

R420

R418

6.8K
OPT

V_SYNC

+3.3V_Normal

R419
1K

C

B

Q405

2SC3052

E

POWER_18_A_DIM

R451

POWER_22_A_DIM

R485 0

POWER_20_A_DIM

R453

R484

0

PWM_PULL-DOWN

OPT
C419
1uF

POWER_22_SCAN_BLK1/OPC_OUT

25V

100R437

100

+24V

C426
68uF
35V

R421
10K

C419-*1

3.9K

R422 0

OPT

R470

+3.5V_ST

R426
10K

10K
OPT

0

0

SCAN_BLK1/OPC_OUT

0

+3.3V_Normal

OPT

R486

4.7K

OPT

INV_CTL

R427

A_DIM

PWM_DIM

ERROR_OUT

OPC_OUT

+12V/+15V

L412

PANEL_CTL

1:AK10

Placed on SMD-TOP

C IN

+3.5V_ST

C461
22uF
10V

OPT
R430
10K

R429
47K

CIC21J501NE

L420

+3.3V_Normal

C436

0.01uF
25V

R439-*1

R431
22K

C

Q406

B

2SC3052

E

10K

R440-*1

1.8K

NON_GIP_CCFL_55"

S7M DDR 1.5V

IC407

MP2212DN

FB

R2

IC402

1

GND

2

3A

IN

3

BS

4

VOUT

3

2

GND

C432

0.1uF
16V

1/10W

VIN

R449
11K

5%

AZ2940D-2.5TRE1

1

Vd=550mV

C442

C438

10uF

0.1uF
16V

16V

OPT

33K

R439

R440

5.6K
EXCEPT_NON_GIP_CCFL_55"

C

Q407

B

EXCEPT_NON_GIP_CCFL_55"

2SC3052

E

R435

22K

C463

100pF

50V

Replaced Part

R457

10K

Close to IC

EN/SYNC

8

SW_2

7

SW_1

6

VCC

5

R455 0

R452

10

1/10W

1%

1

R473

C403

C440

10uF

0.1uF

10V

16V

PANEL_POWER

New item

Q409

AO3407A

D

NR8040T3R6N

C467

0.1uF
50V

S

G

R464

L423

3.6uH

C451

1uF
25V

OPT

10K

C472
22uF
10V

10V

1%

C465
1uF

C443

4.7uF
16V

R1

+2.5V/+1.8V

+2.5V_Normal

C455

0.1uF
16V

PANEL_DISCHARGE_RES

1074 mA

Vout=0.8*(1+R1/R2)

+1.5V_DDR

POWER_ON/OFF1

0.1uF

Placed on SMD-TOP

300 mA

PANEL_VCC

R407

R405

2.2K

2.2K

PANEL_DISCHARGE_RES

C476

ST_3.5V--> 3.375V
20V-->3.51V
24V-->3.64V

12V-->3.58V

18.5V-->3.5V

+24V

POWER_+24V

POWER_+24V

+12V/+15V

R482

R403

24K

4.3K

1%

1%

POWER_+20V

POWER_+20V

L416

C457

C459

10uF

10uF

25V

25V

Vout=(1+R1/R2)*0.8

+12V/+15V

L417

C458

C460

10uF

10uF

25V

25V

Vout=0.8*(1+R1/R2)

+24V

R482-*1

24K

R403-*1

5.1K

R446

1%

5%

30K

+12V/+15V

OPT

R448

1%

R447

R482-*2

24K

POWER_+18.5V

R403-*2

POWER_+18.5V

Only for 32/37LED MODEL

12K

5.1K

5.6K

1%

PD_+12V

1/16W

5%

1%

1%

PD_+12V

+3.5V_ST

R4501K1%

R447-*1

27K

VCC

PD_+3.5V

1%

PD_+3.5V

R404

100K

IC409

NCP803SN293

3

GND

+3.3V_Normal

IC405

AOZ1073AIL

PGND

AGND

1

VIN

2

3A

3

FB

4

LX_2

8

LX_1

7

POWER_ON/OFF2_2

EN

6

R456

COMP

5

9.1K

R454

+5V_Normal

IC406

AOZ1072AI

PGND

VIN

AGND

1

2

3

FB

4

2A

8

7

6

5

+3.5V_ST -> 3.375V

R488
100K

IC408

NCP803SN293

VCC

3

1

GND

PD_+12V

RESET

2

1

PD_+12V

L421

3.6uH

NR8040T3R6N

10K

2200pF

C464

LX_2

LX_1

EN

R459

10K

COMP

12K

R458

+3.5V_ST

R463

10K

OPT

R402
100

RESET

2

PD_+12V

R480
100

Power_DET

1934 mA

1%

R460

27K

4.7K

R461

C423

100pF

R462

10K

L422

3.6uH

NR8040T3R6N

POWER_ON/OFF2_2

2200pF

C466

C469

R1

22uF

1%

16V

OPT

50V

1%

R2

MAX 1A

5%

R465

51K

R1

1%

1.5K

R466

OPT
C427
100pF

50V

1%

R2

R467

10K

C474

0.1uF

CIC21J501NE

C473

0.1uF
16V

C471
22uF
16V

POWER_DET

+3.3V_Normal

L424

C485

0.1uF
16V

+5V_Normal

C477

0.1uF
16V

+12V/+15V

C405
10uF
25V

L401

+5V_USB

IC401

MP8706EN-C247-LF-Z

IN

1

SW_1

2

SW_2

3A

BST

3

4

L406

3.6uH

NR8040T3R6N

C410

0.1uF

R487
22

8

7

6

5

GND

VCC

FB

EN/SYNC

C414
1uF
50V

R410
10K

POWER_ON/OFF2_1

R411

10K

+5V_USB

OPT

C482

100pF

50V

MAX 2000mA

1%

R416

33K

100pF

R1

1%

R417

6.2K

R2

OPT
C429

50V

C420
22uF
16V

C424

0.1uF
16V

+5V_USB

Vout=(1+R1/R2)*0.8

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

C428

0.1uF
16V

Placed on SMD-TOP

C IN

+3.5V_ST

C430
22uF
10V

S7M core 1.26V volt

C439

100pF

R436

10

R442

R441 0

1/10W

1%

50V

22K 1%

Close to IC

EN/SYNC

8

SW_2

7

SW_1

6

VCC

5

R1

R444

24K 1%

C444
1uF

10V

L413

R432
75K

1/8W

1%

Replaced Part

IC403

MP2212DN

FB

1

R2

GND

2

3A

IN

3

BS

4

NON_FRC

Vout=0.8*(1+R1/R2)

10K

R445

L415

3.6uH

NR8040T3R6N

C448

0.1uF
50V

C453
22uF
10V

2026 mA

POWER_ON/OFF2_1

Placed on SMD-TOP

+1.26V_VDDC

C456

0.1uF

C486

0.1uF

C409

330uF
4V
OPT

+1.5V_DDR

POWER_ON/OFF2_1

C411
22uF
10V

OPT

Q408
AO3438

OPT

C435

4.7uF
10V

OPT

R434

120K

IC403-*1

MP2212DN(Marking)

FB

1

GND

2

IN

3

BS

4

FRC

FRC

D

S

G

R443

10K

FRC

FRC

R438

0

EN/SYNC

8

SW_2

7

SW_1

6

VCC

5

GP2_Saturn7M

+1.5V_FRC_DDR

OPT

4.7uF

C445

+1.5V_DDR_FRC

POWER

Ver. 1.2

4

12505WS-12A00

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

+3.5V_ST

EEPROM for Micom

IC1001

M24C16-WMN6T

NC/E0

1

NC/E1

47K

R10 01

TP1001

NC/E2

2

3

VSS

4

MICOM_DEBUG

P1001

X1002-*1

32.768KHz

CRYSTAL_EPSON

FLMD0

15pF

+3.5V_ST

R1030 10K

47K

OPT

R1086

+3.5V_ST

for Debugger

+3.5V_ST

1

2

3

4

5

6

7

8

9

10

11

12

13

+3.5V_ST

R1002 10K

R1006

R1072

R1073

R1005

VCC

8

WC

7

SCL

6

SDA

5

R10 76 22

R10 78 22

R10 10 22

R10 81 22

R10 13 22

10K

10K

10K

10K

TP1002

R1080

22

TP1003

R1008

22

R1014 4.7K

MICOM_RESET

NEC_ISP_Tx

NEC_ISP_Rx

OCD1A

OCD1B

FLMD0

NEC_ISP_Tx

NEC_ISP_Rx

OCD1A

OCD1B

+3.5V_ST

C1002

R1015 4.7K

0.1uF

NEC_EEPROM_SCL

NEC_EEPROM_SDA

+3.5V_ST

OPT

R1084

10K

POWER_ON/OFF2_1

NEC_SCL

NEC_SDA

NEC_EEPROM_SCL

NEC_EEPROM_SDA

CEC_REMOTE_NEC

AMP_MUTE

MODEL1_OPT_0

SOC_RESET

INV_CTL

MODEL1_OPT_1

OCD1B

RF_RESET

R1020 0

22

R1018

22

R1019

P33/TI51/TO51/INTP4

R1065 22

R1067 22

R1066 22

R1023 22

R1064 22

R1063 22

R1059 22

NON_M_REMOTE

R1060 22

M_REMOTE

C1003

0.1uF

P60/SCL0
P61/SDA0

P62/EXSCL0

P63

P75

P74
P73/KR3
P72/KR2
P71/KR1
P70/KR0

P32/INTP3/OCD1B

R1091 10K

GND

C1006 0.1uF

P122/X2/EXCLK/OCD0B

P121/X1/OCD0A

REGC

VSS

VDD

45

46

47

48

1
2
3
4
5
6
7
8

IC1002

UPD78F0513AGA-GAM-AX

NEC_MICOM

9
10
11
12

13

14

15

16

P30/INTP1

P15/TOH0

44

17

C1008 15pF

C1007

CRYSTAL_KDS

X1002

32.768KHz
R1034

4.7M

CRYSTAL_KDS

RESET

P124/XT2/EXCLKS

P123/XT1

FLMD0

41

42

43

18

19

20

P14/RXD6

P13/TXD6

P12/SO10

MICOM_RESET

WIRELESS_DETECT

R1039 22

P40

39

40

21

22

+3.5V_ST

WIRELESS_PWR_EN

47K

22

SW1001

R1046

R1043

P120/INTP0/EXLVI

P41

38

23

AVSS

AVREF

JTP-1127WEM

C1010

4 3

0.1uF

37

P140/PCL/INTP6

36

P00/TI000

35

P01/TI010/TO00

34

P130

33

P20/ANI0

32

ANI1/P21

31

ANI2/P22

30

ANI3/P23

29

ANI4/P24

28

ANI5/P25

27

ANI6/P26

26

ANI7/P27

25

24

+3.5V_ST

R1089

20K

12

R1047 20K

1/16W
1%

1/16W

1%

R1048 22

R1049 22

OPT

R1050 10K





R1090 22

R1055 22

R1056 22

R10 57 22

R1051 22

R1054 22

R1052 10K

19-22_LAMP

C

Q1001

B

2SC3052

E

EDID_WP

RL_ON

OPC_EN

WIRELESS_SW_CTRL

SCART1_MUTE

MODEL1_OPT_3

MODEL1_OPT_2

POWER_ON/OFF1

OLP

SIDE_HP_MUTE

KEY2

KEY1

MICOM MODEL OPTION

AMP_RESET_N

PANEL_CTL

CEC_ON/OFF

R1007 100
R1070 100

R1003 0

+3.5V_ST

GPIO_LED

TOUCH_KEY

R1075 10K

R1079 10K

TACT_KEY

NON_GPIO_LED

R1011 10K

R1074 10K

B/L_LED

R1071 10K

R1009 10K

PWM_BUZZ/IIC_LED

PWM_LED

B/L_LAMP

R1004 10K

R1012 10K

MODEL1_OPT_0
MODEL1_OPT_1
MODEL1_OPT_2
MODEL1_OPT_3

MODEL_OPT_0

MODEL_OPT_1

MODEL_OPT_2

MODEL_OPT_3

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

MODEL OPTION

PIN NO.11HIGH

MODEL_OPT_0

LOW LOW LOW

HIGH HIGH

HIGH

HIGH

B/L_LED

8

PWM_BUZZ/IIC_LED

30

TOUCH_KEY TACT_KEY

31 GPIO_LED

MODEL_OPT_1

LOW

HIGH

HIGH

LOW LOW

HIGH

MODEL_OPT_2

HIGH

LOWLOW

LOWPIN NAME

B/L_LAMP

PWM_LED

NON_GPIO_LED

MODEL_OPT_3

LOW

LOW

LOW

LOW

HIGH

HIGH

LD350/450/550

19/22/26LE3300(5500)

32/37/42/47/55LE5300(10)

LD420

LE7300

TBD

P17/TI50/TO50

P31/INTP2/OCD1A

M_REMOTE

NON_M_REMOTE

R10 62 2 2

R10 61 2 2

RF_ENABLE

P16/TOH1/INTP5

22

R10 69

OCD1A

POWER_DET

LED_B/LG_LOGO

IR

22

R10 68

LED_R/BUZZ

NEC_ISP_Rx

P11/SL10/RXD0

P10/SCK10/TXD0

22

22

R10 41

R10 37

22

R10 36

NEC_RXD

NEC_ISP_Tx

NEC_TXD

POWER_ON/OFF2_2

R1044 10K

R1045 10K

R1083 10K

OPT

OPT

OPT

+3.5V_ST

C1009 1uF

GP2_Saturn7M

MICOM

Ver. 1.4

5

CONTROL

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

IR & LED

+3.5V_ST

EYEQ/TOUCH_KEY

R2411

LED_R/BUZZ

50V

100

EYEQ/TOUCH_KEY

100

R2412

R2413 1.5K

R2410
100

C2407
100pF

50V

C2408
1000pF
50V

OPT

C2409
1000pF
50V

OPT

C2410

0.1uF

D2405

5.6B

R2414

1.5K

P2401

5.6B
D2403

5.6B
D2404

JP2407

JP2408

OPT

16V

JP2411

OPT

R2416

10K

12507WR-12L

1

2

3

4

5

6

7

JP2409

JP2410

8

9

10

11

12

13

LED_B/LG_LOGO

L2404

BLM18PG121SN1D

C2405

0.1uF
16V

NEC_EEPROM_SCL

NEC_EEPROM_SDA

C2406

1000pF

R2405

R2404

10K

10K

1%

1%

R2401
100

KEY1

R2402
100

KEY2

+3.5V_ST

R2425

Q2406

2SC3052

47K

R2430

C

B

E

R2427
0

OPT

R2428

IR

22

+3.5V_ST

R2431

47K

R2426

3.3K

+3.5V_ST

OPT

COMMERCIAL

IR_OUT

Commercial

R2403

22

Commercial_EU

Commercial_EU

Q2401

2SC3052

R2429

47K

10K

C

B

Q2405

E

2SC3052

BLM18PG121SN1D

BLM18PG121SN1D

+3.5V_ST

R2406

47K

C

B

E

Commercial_EU

R2422
0

Commercial_US

L2401

L2402

+3.5V_ST

R2407

10K

C2401

0.1uF

R2408

Commercial

Q2402

2SC3052

Commercial

C2402

0.1uF

L2403

BLM18PG121SN1D

C2403

0.1uF

+3.5V_ST

47K

C

B

Commercial

E

16V

R2409

47K

D2401

5.6V

AMOTECH

D2402

AMOTECH

C2404
1000pF
50V

+3.3V_Normal

5.6V

Zener Diode is

WIRELESS

IR_PASS

R2417

WIRELESS

+3.5V_ST

10K

R2419

WIRELESS

Q2403

2SC3052

WIRELESS

+3.5V_ST

47K

R2421

47K

C

B

WIRELESS

E

R2420

47K

WIRELESS

22

R2418

C

Q2404

B

2SC3052

E

WIRELESS

WIRELESS

close to wafer

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

IR & LED

Ver. 1.2

6

GVDD_ODD_I

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

GVDD_EVEN_I

GSP/GVST_I

GCLK6_I

GCLK5_I

GCLK4_I

GSC/GCLK3_I

GCLK2_I

GOE/GCLK1_I

[LEVEL Shift Block]

VCC_LCM
(+3.3V)

R625
100

GIP

C600

R600

3K

OPT

GIP

C612

0.22uF
50V

GIP

VGH

(+25V)

OPT

R623
22

GIP

A9

A8

A7

A6

A5

A4

A3

R624
22

GIP

EP[VGOFF]

1

THERMAL

2

3

4

5

6

7

8

A2

GIP

FLK

29

IC602

MAX17119DS

GIP

9A110

GON111GOFF12GON2

C611
1uF
50V

R626
10

GIP

GND24RE25FLK326FLK227FLK128VSENSE

VGL

(-5V)

23

13Y114

YDCHG

22

Y2

[POWER Block]

TCON_42_FHD_60_LAMP

R635

R640

910K

470K

1%

1%

TCON_42_FHD_60_LAMP

TCON_42_FHD_60_LAMP

R642-*1

33K

R688
33K
NON_GIP

R689

2.7K
NON_GIP

VGH_M

(+25V)

C627
1uF
50V

VGH

(+25V)

R694

510

NON_GIP
C676 68pF
C677 0.047uF

NON_GIP

C626-*1

470pF

50V

NON_GIP

R691

VGH_FB

R639
0

R692

NON_GIP

R693

NON_GIP

R690

VCC_LCM
(+3.3V)

DISCHG

R632

10K
GIP

OPT
D606

R620
56K
1%

R621
220K
1%

R622
11K
1%

MMSD4148T1G

100V

TH700

47k-ohm

NCP18WB473F10RB

GIP

VGH_FB

C615
1uF
50V

EN2

R627

0

C617
1uF
50V

R629
10

GIP

GIP

R629-*1
200

NON_GIP

R631
10

R631-*1
200

NON_GIP

VGL

(-5V)

D602

KDS226
C
A

VDD_LCM

(+16V)

R644

3.6K

C621

AC

0.47uF
25V

C630
10uF
16V

TCON_42_FHD_60_LAMP

TCON_42_FHD_60_LAMP

VGH

Y9

21

Y8

20

Y7

19

Y6

18

Y5

17

Y4

16

Y3

15

C618

R603

1uF

OPT

50V

OPT

GIP

GIP

R630
10

R633
10

GIP

VGH

(+25V)

VDD_ODD

VDD_EVEN

VST

CLK6

CLK5

CLK4

CLK3

CLK2

CLK1

(+25V)

R668
18K

4.7uF/50V(3216)

R619
18K

C633

50V

TCON_42_FHD_60_LAMP

4.7uF

TCON_42_FHD_60_LAMP

TCON_42_FHD_60_LAMP

R689-*1

GIP

R694-*1

0

GIP

R695-*1

0
GIP

C622
1uF
10V

R637
27K 1%

R643
150K1%

VDD_LCM

(+16V)

0

REF

VGL_FB

0

0

0
0

R695

510

NON_GIP
NON_GIP

OPT

R638
0

GIP
GIP

KDS226
C
A

R636
47K

1%

TCON_42_FHD_60_LAMP

THR
DRVP
GND2

SRC

GON

DRN

NON_GIP

MODE

DLP

FBP

GPGND

R686

0

GIP

D603

C632

AC

1uF

50V

C626

1000pF

50V

GIP

R687

0

NON_GIP

R641
56K

1%

C625

27pF 50V
NON_GIP

1
2
3
4
5
6
7
8
9
10

CTL

R642

11

FLK

10K

GIP

12

DRVN13AGND

MMSD4148T1G

C628
OPT

OPT

C629
OPT

OPT

IC603

MAX17113ETL+

MINI_LVDS

14

16

FBN15REF

DEL1

REF

VGL_FB

MINI_LVDS

D607

100V

C635

0.1uF
50V

C636

1uF 50V

D605 40VMBRA340T3G

D608 40VMBRA340T3G

PGND32LX133LX134SW135SW036FB137COMP38PGOOD39CRST40AGND

17

FB218BST19LX220LX2

C637

0.1uF

C634

0.1uF
50V

R647 2.2

31

30
29
28
27
26
25
24
23
22
21

50V

PGND
EN2
VL
DEL2
EN1
FSEL
VIN
IN2
IN2
OUT

EN2

C638
47uF
25V

C645

1000pF

50V

GIP

C644

0.1uF
50V

L601
22UH

2.8A

D604
MBRA340T3G
40V

C640
1uF
50V

C643

0.1uF
50V

L602
22UH

2.8A

R634

EN2

0

C641
150pF
50V

C606
1uF
50V

C654
22uF
25V

C648
22uF
10V

OPT

PANEL_VCC

R648
1K

R649
OPT

C645-*1

560pF

50V

NON_GIP

(+12V)

C651
1uF
10V

C646

0.1uF
50V

R656

360

VDD_LCM

(+16V)

C653

C642

22uF

1uF

25V

50V

PANEL_VCC
(+12V)

C663

C657

22uF

22uF

25V

25V

VCC_LCM
(+3.3V)

R651

C655
OPT

5.1K

OPT

DPM_A

Change 100ohm -> 10ohm

R612

CHECK Value!!

R650

9.1K
1/8W

10

R613
1K

EN2

[P-GAMMA Block]

Slave Address : 0xE8h
(AO Pin - GND)

VCOM

C601

0.1uF
50V

VCC_LCM
(+3.3V)

AMP_SDA

VCOM_FB0

R669

33

AGND_AMP

VCOM

VCOM_FB0

R652
1K

TCON_47_FHD_60_LAMP

R654

0
R655

0

DVDD

VCOM

AMP_SCL

R670

EP[GND]

SDA

1

THERMAL

A0

2

3

MAX9668ETP+

4

5

6

VCOM_FB

R601 1K

R602 1K

TCON_47_FHD_60_LAMP

VCOMRFB

VCOMLFB

VCOMR

VCOML

GMA16

GMA15

33

AVDD_2

NC_218GMA719GMA820SCL

16

17

15

IC601

7

8

AVDD_1

AVDD_AMP

C602

0.1uF
50V

14

13

12

11

9

NC_110GMA1

21

MINI_LVDS

TCON_47_FHD_60_LAMP

GMA6

GMA5

GMA4

GMA3

GMA2

VDD_LCM

(+16V)

1uF/50V(2012)

C603

0.1uF
50V

R618

10

1/8W

C604

1uF
50V

GMA13

GMA12

GMA7

GMA6

GMA4

GMA3

For P-Gamma Data Download

P700

12505WS-03A00

URSA_DEBUG

1

2

3

4

AMP_SCL

AMP_SDA

VDD_LCM

(+16V)

VDD_LCM

(+16V)

[HVDD Block]

PANEL_VCC

(+12V)

C661
10uF
16V

R658

2.2K

MINI_LVDS

HVDD

MINI_LVDS

R657

2.2K

6.8uH/1.8A
(6x6x2mm)

L600

IC600

MINI_LVDS

5

6

LBO

SW_115SW_216PGND_2

LBI

7

6.8uH

MINI_LVDS

R696
0

GIP

13PG14

12

11

10

9

R608
10

GND_2

GND_1

FB

AGND

R698
1M

NON_GIP

TCON_42_FHD_60_LAMP

TCON_42_FHD_60_LAMP

C649

1uF
50V

R1

C652

R609
510K

22pF

1%

50V

R610

R611

150K

200K

1%

1%

TCON_42_FHD_60_LAMP

Vo = 1.153*(1+R1/R2)

C659
22uF
16V R671

R2

OPT

R605

OPT

L604

L603

MINI_LVDS

C610

C619

10uF

10uF

25V

25V

R672
24K

D609
MMSD4148T1G

100V

47K

R616
10K

OPT

PANEL_VCC

R606
20K

R607

7.5K

C639
1uF
25V

PGND_1

EN2

VIN_1

VIN_2

EN

1

2

TPS62110RSAR

3

4

SYNC8VINA

RXA3-

DISCHG

RXD4-

RXD4+

10

VGH

(+25V)

VGL

(-5V)

(-5V)

R604

VGL

R660

NON_GIP

0

R661

VCC_LCM
(+3.3V)

C605

NON_GIP

R614 0

GIP

R615 0

GIP

R617

0

R645

0

OPT

0

R628

3.3K
GIP

15pF
50V

C665
15pF
50V

C666
15pF
50V

FLK

VGI_P

VGI_N

VGL_I

POL

SOE

RXD3-

RXD3+

GSP_R

RXDCK+

RXDCK-

GVDD_EVEN

R665
0

R659
0

R685
0

NON_GIP

4.7K
GIP

R662
0

R653
0

GIP

R646
0

GIP

VCC_LCM
(+3.3V)

R673

3.3K
NON_GIP

C667
15pF
50V

NON_GIP

For GOE Masking

C675
15pF
50V

NON_GIP

C672
15pF
50V

NON_GIP

C669
15pF
50V

OPT

C668
15pF
50V

OPT

GSP/GVST_I

GOE/GCLK1_I

GSC/GCLK3_I

GVDD_ODD_IGVDD_ODD

GVDD_EVEN_I

GCLK2

GCLK4

RXA4-

RXA4+

VCC_LCM
(+3.3V)

R5266

3.3K

R5267

0

OPT

MINI_LVDS

R667
0

GIP

R663
0

GIP

R664
0

GIP

R666
0

GIP

H_CONV

C670
15pF
50V

OPT

C673
15pF
50V

OPT

C674
15pF
50V

OPT

C671
15pF
50V

OPT

GCLK2_I

GCLK4_I

GCLK5_I

GCLK6_I

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

T-CON

Ver. 2.1

7

HDMI_1

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

SHIELD

$0.253

HDMI_1

EAG59023302

JK802

HDMI EEPROM

5V_HDMI_1

+5V_Normal

A1CA2

ENKMC2838-T112

R874

10K

R884

4.7K

5V_HDMI_2

10K

R873

R885

4.7K

5V_HDMI_3

R872

R886

4.7K

R888

4.7K

A2

10K

+5V_Normal

R889

4.7K

D821

A1

ENKMC2838-T112
D822

C

+5V_Normal

A1CA2
ENKMC2838-T112
D823

R890

4.7K

EDID_WP

DDC_SCL_1

DDC_SDA_1

EDID_WP

DDC_SCL_2

DDC_SDA_2

EDID_WP

DDC_SCL_3

DDC_SDA_3

5V_HDMI_1

20

19

18

17

16

15

14

13

12

11

CK+

10

D0-

9

D0_GND

8

D0+

7

D1-

6

D1_GND

5

D1+

4

D2-

3

D2_GND

2

D2+

1

R896
1K

R804

1.8K

D802

5V_DET_HDMI_1

3.3K

R802

C802

0.1uF
16V

JP803

JP804

R825

R826

R824

R847

R846

R845

R844

R843

R842

R850

R848

HDMI_3

C

Q802

2SC3052

22

22

100

0

0

0

0

0

0

0

0

R830

B

10K

E

HPD1

DDC_SDA_1

DDC_SCL_1

HDMI_CEC

CK-_HDMI1

CK+_HDMI1

D0-_HDMI1

D0+_HDMI1

D1-_HDMI1

D1+_HDMI1

D2-_HDMI1

D2+_HDMI1

$0.253

HDMI_3

5V_HDMI_3

SHIELD

20

19

18

17

16

15

14

13

12

11
10

EAG59023302

9

8

7

6

5

4

3

2

1

JK804

CK+

D0-

D0_GND

D0+

D1-

D1_GND

D1+

D2-

D2_GND

D2+

R894
1K

R838

1.8K

D812

5V_DET_HDMI_3

3.3K

R836

C804

0.1uF
16V

JP807

JP808

R859

R851

R860

R852

R821

R814

R819

R818

R820

R812

R816

C

Q804

2SC3052

22

22

100

0

0

0

0

0

0

0

0

R864

B

10K

E

HPD3

DDC_SDA_3

DDC_SCL_3

HDMI_CEC

CK-_HDMI3

CK+_HDMI3

D0-_HDMI3

D0+_HDMI3

D1-_HDMI3

D1+_HDMI3

D2-_HDMI3

D2+_HDMI3

HDMI_1

IC801

AT24C02BN-10SU-1.8

A0

1

$0.055

A1

2

A2

3

GND

4

HDMI_2

AT24C02BN-10SU-1.8

A0

1

$0.055

A1

2

A2

3

GND

4

AT24C02BN-10SU-1.8

A0

1

$0.055

A1

2

A2

3

GND

4

IC802

HDMI_3

IC803

VCC

8

WP

7

SCL

6

SDA

5

VCC

8

WP

7

SCL

6

SDA

5

VCC

8

WP

7

SCL

6

SDA

5

JP809

R876 22

R875 22

JP810

R878 22

R877 22

JP811

C806

0.1uF

0.1uF

R879 22

R880 22

C807

C808

0.1uF

HDMI_2

SHIELD

20

$0.253

HDMI_2

EAG59023302

JK801

5V_HDMI_2

R895

19

18

17

16

15

14

13

12

11

CK+

10

D0-

9

D0_GND

8

D0+

7

D1-

6

D1_GND

5

D1+

4

D2-

3

D2_GND

2

D2+

1

1K

R803

1.8K

D801

5V_DET_HDMI_2

R801

3.3K

C801

0.1uF
16V

JP802

JP801

R805 22

R806

R815 100

R831

R834

R822

R832

R827

R829

R823

R833

C

R828

Q801

2SC3052

22

0

0

0

0

0

0

0

0

10K

B

E

HPD2

DDC_SDA_2

DDC_SCL_2

HDMI_CEC

CK-_HDMI2

CK+_HDMI2

D0-_HDMI2

D0+_HDMI2

D1-_HDMI2

D1+_HDMI2

D2-_HDMI2

D2+_HDMI2

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

SIDE_HDMI

JACK_GND

20

$0.253

19

18

17

16

15

14

13

12

11
10

EAG42463001

9

HDMI_SIDE

8

7

6

5

4

3

2

1

JK803

CK+

D0-

D0_GND

D0+

D1-

D1_GND

D1+

D2-

D2_GND

D2+

5V_HDMI_4

R897

1K
R837

1.8K

D811

5V_DET_HDMI_4

R835

3.3K

JP806

C803

0.1uF
16V

JP805

R839 22

R840

R841

R810

R807

R817

R809

R813

R811

R849

R808

+5V_Normal

5V_HDMI_4

A2

A1

R871

10K

R887

4.7K

+3.5V_ST

ENKMC2838-T112
D824

C

R891

4.7K

R857
68K
OPT

CEC_ON/OFF

R853

68K

Ver. 1.2

8

R858

0

EDID_WP

DDC_SCL_4

DDC_SDA_4

CEC_REMOTE_S7

CEC_REMOTE_NEC

C

Q803

2SC3052

22

100

0

0

0

0

0

0

0

0

R862

B

10K

E

HPD4

DDC_SDA_4

DDC_SCL_4

HDMI_CEC

CK-_HDMI4

CK+_HDMI4

D0-_HDMI4

D0+_HDMI4

D1-_HDMI4

D1+_HDMI4

D2-_HDMI4

D2+_HDMI4

For CEC

HDMI_CEC

OPT

D803

AVRL161A1R1NT

GND

OPT

D826

AVRL161A1R1NT

GND

HDMI_SIDE

IC804

AT24C02BN-10SU-1.8

A0

1

$0.055

A1

2

A2

3

GND

4

D804

D825

VCC

8

WP

7

SCL

6

SDA

5

68K

R854

68K

R892

R855

OPT

R883

0

SBD

G

OPT

0

SBD

G

JP812

R881 22

R882 22

Q806

BSS83

Q805

BSS83

C809

0.1uF

+3.3V_Normal

R856
10K

C805

0.1uF
16V

GND

R893
10K

C810

0.1uF
16V

GND

GP2_Saturn7M

HDMI

COMMON AREA

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

New Item Development

EARPHONE BLOCK

EXCEPT_CHINA_HOTEL_OPT

HP_LOUT

2:X19

HP_ROUT

2:X19

C1118
10uF

C1115

16V

1000pF
50V

OPT

EXCEPT_CHINA_HOTEL_OPT

C1119
10uF
16V

C1116
1000pF
50V

OPT

R1125
1K

R1128

1K

Q1101

MMBT3904-(F)

Q1102

MMBT3904-(F)

C

B

E

C

B

E

MMBT3904-(F)

B

MMBT3904-(F)

B

E

Q1104

C

HP_DET

E

Q1103

C

+3.3V_Normal

R1130

10K

R1155
1K

JK3301

KJA-PH-0-0177
5GND

4L

3DETECT

1R

SPK_R+_HOTEL

2:X19

SPK_R-_HOTEL

2:X19

C

Q1105

ISA1530AC1

E

B

R1129

3.3K

+3.5V_ST

C

E

B
Q1106

2SC3052

SIDE_HP_MUTE

PC AUDIO

JK1102

PEJ027-01

E_SPRING

3

T_TERMINAL1

6A

B_TERMINAL1

7A

R_SPRING

4

T_SPRING

5

B_TERMINAL2

7B

T_TERMINAL2

6B

D1101
AMOTECH

5.6V
OPT

D1102

AMOTECH

5.6V
OPT

C1107

100pF

50V

C1108
100pF
50V

R1102
470K

R1103
470K

R1107
15K

R1108
15K

R1110
10K

10K

R1112
0

R1111

R1113
0

PC_R_IN

PC_L_IN

2:S16

2:S16

SPDIF OPTIC JACK

5.15 Mstar Circuit Application

SPDIF_OUT

2:X18

OPT

R1152

4.7K

A

B

GND

IC1104

NL17SZ00DFT2G

OPT

1

2

3

D1116

5.6V
OPT

+5V_Normal

EDID_WP

RGB_DDC_SCL

RGB_DDC_SDA

+3.3V_Normal

R1146
10K

D1117

5.6V

R1147
1K

DSUB_DET

+3.3V_Normal

VCC

5

C1117

0.1uF
16V

OPT

R1126

Y

4

22

OPT

R1127
0

C1131

0.1uF
16V

VINPUT

C1121
100pF
50V

GND

Fiber Optic

1

VCC

2

JK1103

JST1223-001

3

4

FIX_POLE

RGB PC

DSUB_VSYNC

DSUB_HSYNC

DSUB_B+

DSUB_B-

DSUB_G+

DSUB_G-

DSUB_R+

DSUB_R-

R1133
75

0

R1135
75

0

R1137
75

0

C1122
68pF
50V
OPT

R1134

R1136

R1138

AT24C02BN-10SU-1.8

A0

1

A1

2

A2

3

GND

4

IC1105

C1123
OPT

C1124
OPT

C1125
OPT

R1148

0

OPT

OPT

OPT

D1115

ENKMC2838-T112

A1

C

A2

4.7K

R1150
0

C1128
18pF

50V

D1113

30V

R1140

4.7K

R1141
22

D1114

5.6V

OPT

R1142

10K

C1129

0.1uF

16V

R1143
22

R1139

VCC

8

WP

7

SCL

6

SDA

5

C1127

18pF

50V

C1126

D1109

68pF

30V

50V

OPT

D1110
30V

D1111
30V

D1112
30V

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

RED2GREEN3BLUE4GND_15DDC_GND

RED_GND7GREEN_GND8BLUE_GND9NC10SYNC_GND

GND_212DDC_DATA13H_SYNC14V_SYNC15DDC_CLOCK

11

SPG09-DB-010

6

1

JK1104

GP2_Saturn7M

COMMON AREA

SHILED

16

Ver. 1.0

9

RS232C

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

C1101 0.33uF

C1102

0.1uF

C1103

0.1uF

C1104

0.1uF

C1105

0.1uF
DOUT2

RIN2

C1+

C1-

C2+

C2-

V+

V-

IC1101

MAX3232CDR

1

2

3

4

5

6

7

8

EAN41348201

10

5

9

8

7

6

SPG09-DB-009

JK1101

4

3

2

1

S7_RXD1

NEC_RXD

S7_TXD1

NEC_TXD

R1123
100

R1124
100

OPT

R1122

0

JP1121

JP1122

IR_OUT

+3.5V_ST

D1107
CDS3C30GTH
30V

C1106

0.1uF

VCC

16

GND

15

DOUT1

14

RIN1

13

ROUT1

12

DIN1

11

DIN2

10

ROUT2

9

+3.5V_ST

4.7K
OPT

R1109

4.7K
OPT

R1114

D1108
CDS3C30GTH
30V

R1157 0

R1156

R1154

R1153

0

0

0

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

RS232C 9PIN

Ver. 1.0GP2_Saturn7M

10

(New Item Developmen H:9.2mm)

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

SIDE_AV

SIDE_AV_OPT

D3301

30V

SIDE_AV_OPT

D3302

5.6V

SIDE_AV_OPT

D3303

5.6V

SIDE_AV_OPT

D3304

5.6V

PPJ235-01

JK3302

SIDE_AV_OPT

5A

[YL]E-LUG

4A

[YL]O-SPRING

3A

[YL]CONTACT

4B

[WH]O-SPRING

3C

[RD]CONTACT

4C

[RD]O-SPRING

5C

[RD]E-LUG

SIDE_AV_OPT

R3301

75

SIDE_AV_OPT

SIDE_AV_OPT

C3301

100pF

SIDE_AV_OPT

R3303
470K

R3304
470K

SIDE_AV_OPT

L3303

BLM18PG121SN1D

+3.3V_Normal

SIDE_AV_OPT

10K

R3302

SIDE_AV_OPT

L3301

BLM18PG121SN1D

SIDE_AV_OPT

L3302

BLM18PG121SN1D

SIDE_AV_OPT

SIDE_AV_OPT

C3302

100pF

50V

SIDE_AV_OPT

C3303

100pF

50V

R3305
1K

SIDE_AV_OPT

R33 06

10K

SIDE_AV_OPT

R33 07

10K

C3304

100pF

OPT

SIDE_AV_OPT
R3308
12K

SIDE_AV_OPT
R3309
12K

SIDEAV_CVBS_IN

SIDEAV_DET

SIDEAV_L_IN

SIDEAV_R_IN

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

SIDE AV

Ver. 1.0

11

WIRELESS_DL_RX

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

WIRELESS_TX

S7_TXD

WIRELESS READY MODEL

Wireless power

+24V

R2618

IC2601

1

2

3

4

5

6

7

8

R2605
27K

B

WIRELESS

OPT

R2604
22K

C

Q2601

E

0

16

15

14

13

12

11

10

9

WIRELESS_PWR_EN

WIRELESS

R2601

R2620

0

WIRELESS

0

C2601

0.1uF
50V

R2603
10K

WIRELESS

MC14053BDR2G

Y1

Y0

Z1

Z

Z0

INH

VEE

VSS

C2602

2.2uF

G
Q2602
AO3407A

WIRELESS

VDD

Y

X

X1

X0

A

B

C

R2606

S

D

C2603

0.01uF

+3.5V_ST

OPT

0

S7_TXD1

S7_RXD1

R2615

WIRELESS

R2619
0

50V

WIRELESS

R2607
0

1/4W

3216

+3.3V_Normal

0

S7_RXD

WIRELESS_DETECT

WIRELESS_SCL

WIRELESS_SDA

WIRELESS_RX

WIRELESS_TX

OPT

R2608

0

C2604

0.1uF

WIRELESS_DL_TX
WIRELESS_RX

+3.5V_ST

IR_PASS

OPT

OPT

OPT

4.7K

47K

R2609

R2610

+3.3V_Normal

R2612

10K

R2617 1K

WIRELESS_SW_CTRL

JK2601

KJA-PH-3-0168

VCC[24V/20V/17V]_1

VCC[24V/20V/17V]_2

VCC[24V/20V/17V]_3

VCC[24V/20V/17V]_4

VCC[24V/20V/17V]_5

VCC[24V/20V/17V]_6

TP2601

TP2602

DETECT

INTERRUPT

GND_1

RESET

GND_2

I2C_SCL

I2C_SDA

GND_3

UART_RX

UART_TX

GND_4

GND_5

GND_6

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

IR

18

19

20

21

SHIELD

RS232C & Wireless

WIRELESS_SW_CTRL

HIGH

LOW

SELECT PIN

X1/Y1/Z1

X0/Y0/Z0

From wireless_I2C to micom I2C

OPT

R2602

WIRELESS_PWR_EN

AMP_SDA

AMP_SCL

10K

B

OPT

E

C

Q2603

ISA1530AC1

D

Q2604

FDV301N

WIRELESS

STATUS

WIRELESS Dongle connect --> WIRELESS RS232

WIRELESS Dongle Dis_con --> S7 RS232

+3.3V_Normal

OPT

G

OPT

S

G

OPT

D

Q2605
FDV301N

R2611 0

R2613

WIRELESS

10K

R2614

WIRELESS_SDA

S

0

WIRELESS_SCL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

Ver. 1.2 --> 1.3: wireless opt change, 090818, hongsu

GP2_Saturn7M

Wireless ready

Ver. 1.3

12

USB_DIODES

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

IC1450

AP2191SG-13

NC

L1451

MLB-201209-0120P-N2

120-ohm

C1451
22uF
16V

SIGN6409

1234

USB D OWN STRE AM

JK145 0

KJA-U B-4-0004

D1451

5

CDS3C05HDMI1

5.6V
OPT

D1452

CDS3C05HDMI1

5.6V
OPT

OUT_2

OUT_1

FLG

8

$0.077

7

6

5

R1451 47

R1452 0

R1453 0

GND

1

IN_1

2

TP1451

R1454
10K

C1452
10uF
10V

USB1_OCD

IN_2

3

EN

4

SIDE_USB_DM

SIDE_USB_DP

C1453

0.1uF

/RST_HUB

+5V_USB

+3.3V_Normal

R1455

4.7K

OPT

R1456 0

USB1_CTL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

32_FHD

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

VGH VGL

R620-*1
22K
1%

TCON_32_FHD

R622-*1
11K
1%

TCON_32_FHD

R621-*1
220K
1%

TCON_32_FHD

R637-*1
51K
1%

TCON_32_FHD

R643-*1
270K

1%

TCON_32_FHD

37_FHD

VGH VGL

R620-*2
47K
1%

TCON_37_FHD

R622-*2
12K
1%

TCON_37_FHD

R621-*2
220K
1%

TCON_37_FHD

R637-*2
20K
1%

TCON_37_FHD

R643-*2
150K
1%
TCON_37_FHD

42_FHD_60_LAMP

VGH VGL

SHEET7

SHEET7

42_FHD

VGH

R620-*3
56K
1%

TCON_42_FHD

R622-*3
11K
1%

TCON_42_FHD

(Without 60Hz Lamp)

R621-*3
220K
1%

TCON_42_FHD

VGL

R637-*3
27K
1%
TCON_42_FHD

R643-*3
150K
1%

TCON_42_FHD

VDD

R635-*1
150K

1%

TCON_32_FHD

R636-*1
27K

1%

TCON_32_FHD

R640 OPEN

R641-*1
24K

1%

TCON_32_FHD

HVDD

R609-*1
510K

1%
TCON_32_FHD

R610-*1
150K

1%
TCON_32_FHD

R611-*1
200K

1%
TCON_32_FHD

VDD

R635-*2
910K

1%

TCON_37_FHD

R636-*2
56K

1%

TCON_37_FHD

R640-*2
470K

1%

TCON_37_FHD

R641-*2
56K

1%

TCON_37_FHD

HVDD

R609-*2
470K

1%
TCON_37_FHD

R610-*2
91K

1%
TCON_37_FHD

R611 OPEN

VCOM FEED BACK VCOM FEED BACK VCOM FEED BACK

R601-*1
1K
1%

TCON_32_FHD

R652-*1
1K
1%

TCON_32_FHD

R602-*1
1K
1%

TCON_32_FHD

47_FHD_60_LAMP

VGH

R620-*4
30K
1%

TCON_47_FHD_60_LAMP

R622-*4
11K
1%

TCON_47_FHD_60_LAMP

VDD

R635-*4
180K

1%

TCON_47_FHD_60_LAMP

R636-*4
68K

1%

TCON_47_FHD_60_LAMP

R621-*4
220K
1%

TCON_47_FHD_60_LAMP

R640 OPEN

R641-*4
20K

1%

TCON_47_FHD_60_LAMP

VGL

R637-*4
51K
1%

TCON_47_FHD_60_LAMP

R643-*4
270K

1%

TCON_47_FHD_60_LAMP

HVDD

R609-*4
510K

1%

TCON_47_FHD_60_LAMP

R610-*4
150K

1%

TCON_47_FHD_60_LAMP

R611-*4
220K

1%

TCON_47_FHD_60_LAMP

R601-*2
1K
1%

TCON_37_FHD

R652-*2

1.5K
5%

TCON_37_FHD

47_FHD

VGH

R620-*5
51K
1%

TCON_47_FHD

R622-*5
11K
1%

TCON_47_FHD

VDD

R635-*5
180K

1%

TCON_47_FHD

R636-*5
75K

1%

TCON_47_FHD

R602-*2
1K
1%

TCON_37_FHD

(Without 60Hz Lamp)

R621-*5
220K
1%

TCON_47_FHD

R640 OPEN

R641-*5
20K

1%

TCON_47_FHD

VGL

R637-*5
51K
1%

TCON_47_FHD

R643-*5
270K

1%

TCON_47_FHD

HVDD

R609-*5
510K

1%
TCON_47_FHD

R610-*5
150K

1%
TCON_47_FHD

R611-*5
220K

1%
TCON_47_FHD

VDD

SHEET7

VCOM FEED BACK

R601 OPEN

R652-*4
1K
1%

TCON_42_FHD_60_LAMP

55_FHD

VGH

R620-*6
510K
1%

TCON_55_FHD

R622-*6
27K
1%

TCON_55_FHD

R635-*6
150K

1%
TCON_55_FHD

R636-*6
75K

1%
TCON_55_FHD

R602-*4
1K
1%

TCON_42_FHD_60_LAMP

R621-*6
68K
1%

TCON_55_FHD

R640 OPEN

R641-*6
15K

1%
TCON_55_FHD

HVDD

SHEET7

VGL

R637-*6
27K
1%
TCON_55_FHD

R643-*6
150K
1%

TCON_55_FHD

HVDDVDD

R609-*6
180K

1%

TCON_55_FHD

R610-*6
68K

1%

TCON_55_FHD

R611-*6
56K

1%
TCON_55_FHD

VDD

R635-*3
150K

1%
TCON_42_FHD

R636-*3
75K

1%
TCON_42_FHD

R601 OPEN

R652-*3
1K
1%

TCON_42_FHD

R640 OPEN

R641-*3
15K

1%
TCON_42_FHD

R602-*3
1K
1%

TCON_42_FHD

HVDD

R609-*3
510K

1%
TCON_42_FHD

R610-*3
150K

1%
TCON_42_FHD

R611-*3
200K

1%
TCON_42_FHD

VCOM FEED BACK

SHEET7

VCOM FEED BACK

R601-*5
1K
1%

TCON_47_FHD

R652-*5
1K
1%

TCON_47_FHD

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

R602-*5
1K
1%

TCON_47_FHD

VCOM FEED BACK

R601 OPEN R602 OPEN

R652-*6
0
5%

TCON_55_FHD

GP2_Saturn7M

T-CON Power Table

Ver. 1.2
15

VCC_1.5V_DDR

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

R1201

1K 1%

R1202

1K 1%

0.1uF
1000pF

C1202

C1201

CLose to DDR3

A-MVREFDQ

VCC_1.5V_DDR

R1204

1K 1%

0.1uF

R1205

1K 1%

C1204

C1203

CLose to Saturn7M IC

1000pF

A-MVREFCA

VCC_1.5V_DDR

C1205

10uF

C1206

Close to DDR Power Pin

DDR3 1.5V By CAP - Place these Caps near Memory

0.1uF

C1207

0.1uF

C1208

0.1uF

C1210

0.1uF

C1211

0.1uF

C1212

0.1uF

C1213

0.1uF

C1214

0.1uF

C1215

C1216

0.1uF

0.1uF

C1217

0.1uF

C1218

0.1uF

C1219

0.1uF

C1220

0.1uF

C1221

0.1uF

C1222

0.1uF

C1223

0.1uF

C1224

0.1uF

0.1uF

DDR3 1.5V By CAP - Place these Caps near Memory

0.1uF

0.1uF

C1227

0.1uF

C1228

0.1uF

C1229

C1230

C1231

0.1uF

C1232

0.1uF

C1233

0.1uF

C1234

0.1uF

C1235

0.1uF

C1236

0.1uF

C1237

0.1uF

0.1uF

0.1uF

C1239

C1238

Close to DDR Power Pin

C1241

0.1uF

C1242

0.1uF

C1243

0.1uF

C1244

0.1uF

VCC_1.5V_DDR

C1245

10uF

B-MVREFCA

C1246

CLose to Saturn7M IC

1000pF

VCC_1.5V_DDR

0.1uF

C1247

C1248

VCC_1.5V_DDR

C1249

0.1uF

1K 1%

C1250

R1227

R1228

1K 1%

R1224

1K 1%

B-MVREFDQ

R1225

1K 1%

1000pF

CLose to DDR3

A-MVREFCA

A-MVREFDQ

VCC_1.5V_DDR

R1203

240

1%

IC1201

H5TQ1G63BFR-H9C

M8

VREFCA

H1

VREFDQ

L8

ZQ

B2

VDD_1

D9

VDD_2

G7

VDD_3

K2

VDD_4

K8

VDD_5

N1

VDD_6

N9

VDD_7

R1

VDD_8

R9

VDD_9

A1

VDDQ_1

A8

VDDQ_2

C1

VDDQ_3

C9

VDDQ_4

D2

VDDQ_5

E9

VDDQ_6

F1

VDDQ_7

H2

VDDQ_8

H9

VDDQ_9

J1

NC_1

J9

NC_2

L1

NC_3

L9

NC_4

T7

NC_6

A9

VSS_1

B3

VSS_2

E1

VSS_3

G8

VSS_4

J2

VSS_5

J8

VSS_6

M1

VSS_7

M9

VSS_8

P1

VSS_9

P9

VSS_10

T1

VSS_11

T9

VSS_12

B1

VSSQ_1

B9

VSSQ_2

D1

VSSQ_3

D8

VSSQ_4

E2

VSSQ_5

E8

VSSQ_6

F9

VSSQ_7

G1

VSSQ_8

G9

VSSQ_9

A10/AP

A12/BC

RESET

DQSL
DQSL

DQSU
DQSU

DQL0
DQL1
DQL2
DQL3
DQL4
DQL5
DQL6
DQL7

DQU0
DQU1
DQU2
DQU3
DQU4
DQU5
DQU6
DQU7

+1.5V_DDR

L1201

R1213

A-MA0

A-MA2

A-MA11

A-MA1
A-MA8

A-MCK

A-MCKB

A-MA6

A-MBA0

A-MA3
A-MA5
A-MA7

A-MA4
A-MA12
A-MBA1
A-MA10

A-MRESETB

A-MBA2
A-MA13

A-MA9

A-MCK

A-MCKB

A-MRASB
A-MCASB

A-MODT
A-MWEB

A-MDQSL

A-MDQSLB

A-MDQSU

A-MDQSUB

A-MDQL1
A-MDQL3

A-MDML

A-MDQU2

A-MCKE
A-MDQL7
A-MDQL5

A-MDQL0
A-MDQL2
A-MDQL6
A-MDQL4

A-MDQU7
A-MDQU3
A-MDQU5

A-MDMU

A-MDQU6
A-MDQU0
A-MDQU4

A-MDQU1

A-MCKE

N3

A0

P7

A1

P3

A2

N2

A3

P8

A4

P2

A5

R8

A6

R2

A7

T8

A8

R3

A9

L7
R7

A11

N7
T3

A13

M7

A15

M2

BA0

N8

BA1

M3

BA2

J7

CK

K7

CK

K9

CKE

L2

CS

K1

ODT

J3

RAS

K3

CAS

L3

WE

T2

F3
G3

C7
B7

E7

DML

D3

DMU

E3
F7
F2
F8
H3
H8
G2
H7

D7
C3
C8
C2
A7
A2
B8
A3

A-MA0
A-MA1
A-MA2
A-MA3
A-MA4
A-MA5
A-MA6
A-MA7
A-MA8
A-MA9
A-MA10
A-MA11
A-MA12
A-MA13

A-MBA0
A-MBA1
A-MBA2

A-MCKE

A-MODT
A-MRASB
A-MCASB
A-MWEB

A-MRESETB

A-MDQSL
A-MDQSLB

A-MDQSU
A-MDQSUB

A-MDML
A-MDMU

A-MDQL0
A-MDQL1
A-MDQL2
A-MDQL3
A-MDQL4
A-MDQL5
A-MDQL6
A-MDQL7

A-MDQU0
A-MDQU1
A-MDQU2
A-MDQU3
A-MDQU4
A-MDQU5
A-MDQU6
A-MDQU7

1%

R1235

56

1%

R1236

56

VCC_1.5V_DDR

R1231
10K

C1209

0.01uF
25V

10

R1214

10

AR1208

10

AR1203

10

AR1204

10

AR1201

10

R1206

10

R1207

10

AR1202

10

R1208

10

R1209

10

R1211

10

R1212

10

AR1209

10

AR1210

10

AR1205

10

AR1206

10

AR1207

10

R1210

10

R1233 10K

A-TMA0

A-TMA2

A-TMA11
A-TMA1
A-TMA8
A-TMA6

A-TMBA0
A-TMA3
A-TMA5
A-TMA7

A-TMA4
A-TMA12
A-TMBA1
A-TMA10

A-TMRESETB
A-TMBA2
A-TMA13
A-TMA9

A-TMCK

A-TMCKB

A-TMRASB
A-TMCASB
A-TMODT
A-TMWEB

A-TMDQSL

A-TMDQSLB

A-TMDQSU

A-TMDQSUB

A-TMDQL1
A-TMDQL3
A-TMDML

A-TMDQU2

A-TMCKE
A-TMDQL7
A-TMDQL5

A-TMDQL0
A-TMDQL2
A-TMDQL6
A-TMDQL4

A-TMDQU7
A-TMDQU3
A-TMDQU5
A-TMDMU

A-TMDQU6
A-TMDQU0
A-TMDQU4

A-TMDQU1

A-TMA0
A-TMA1
A-TMA2
A-TMA3
A-TMA4
A-TMA5
A-TMA6
A-TMA7
A-TMA8

A-TMA9
A-TMA10
A-TMA11
A-TMA12
A-TMA13

A-TMBA0
A-TMBA1
A-TMBA2

A-TMCK
A-TMCKB
A-TMCKE

A-TMODT

A-TMRASB
A-TMCASB

A-TMWEB

A-TMRESETB

A-TMDQSL

A-TMDQSLB

A-TMDQSU

A-TMDQSUB

A-TMDML
A-TMDMU

A-TMDQL0
A-TMDQL1
A-TMDQL2
A-TMDQL3
A-TMDQL4
A-TMDQL5
A-TMDQL6
A-TMDQL7

A-TMDQU0
A-TMDQU1
A-TMDQU2
A-TMDQU3
A-TMDQU4
A-TMDQU5
A-TMDQU6
A-TMDQU7

LGE107D (S7M Divx_Non RM)

B8

A_DDR3_A0/DDR2_A13

B9

A_DDR3_A1/DDR2_A8

A8

A_DDR3_A2/DDR2_A9

C21

A_DDR3_A3/DDR2_A1

B10

A_DDR3_A4/DDR2_A2

A22

A_DDR3_A5/DDR2_A10

A10

A_DDR3_A6/DDR2_A4

B22

A_DDR3_A7/DDR2_A3

C9

A_DDR3_A8/DDR2_A6

C23

A_DDR3_A9/DDR2_A12

B11

A_DDR3_A10/DDR2_RASZ

A9

A_DDR3_A11/DDR2_A11

C10

A_DDR3_A12/DDR2_A0

B23

A_DDR3_A13/DDR2_A7

B21

A_DDR3_BA0/DDR2_BA2

A11

A_DDR3_BA1/DDR2_CASZ

A23

A_DDR3_BA2/DDR2_A5

A12

A_DDR3_MCLK/DDR2_MCLK

C11

A_DDR3_MCLKZ/DDR2_MCLKZ

B12

A_DDR3_CKE/DDR2_DQ5

C20

A_DDR3_ODT/DDR2_ODT

A20

A_DDR3_RASZ/DDR2_WEZ

B20

A_DDR3_CASZ/DDR2_BA1

A21

A_DDR3_WEZ/DDR2_BA0

C22

A_DDR3_RESETB

C16

A_DDR3_DQSL/DDR2_DQS0

B16

A_DDR3_DQSLB/DDR2_DQSB0

A16

A_DDR3_DQSU/DDR2_DQSB1

C15

A_DDR3_DQSUB/DDR2_DQS1

A14

A_DDR3_DML//DDR2_DQ13

B18

A_DDR3_DMU/DDR2_DQ6

C18

A_DDR3_DQL0/DDR2_DQ3

B13

A_DDR3_DQL1/DDR2_DQ7

A19

A_DDR3_DQL2/DDR2_DQ1

C13

A_DDR3_DQL3/DDR2_DQ10

C19

A_DDR3_DQL4/DDR2_DQ4

A13

A_DDR3_DQL5/DDR2_DQ0

B19

A_DDR3_DQL6/DDR2_CKE

C12

A_DDR3_DQL7/DDR2_DQ2

A15

A_DDR3_DQU0/DDR2_DQ15

A17

A_DDR3_DQU1/DDR2_DQ9

B14

A_DDR3_DQU2/DDR2_DQ8

C17

A_DDR3_DQU3/DDR2_DQ11

B15

A_DDR3_DQU4/DDR2_DQM1

A18

A_DDR3_DQU5/DDR2_DQ12

C14

A_DDR3_DQU6/DDR2_DQM0

B17

A_DDR3_DQU7/DDR2_DQ14

IC101

S7M_DIVX & MS10

VCC_1.5V_DDR

C1225

C1226

10uF

0.1uF

10V

16V

B_DDR3_A0/DDR2_A13

B_DDR3_A1/DDR2_A8
B_DDR3_A2/DDR2_A9
B_DDR3_A3/DDR2_A1
B_DDR3_A4/DDR2_A2

B_DDR3_A5/DDR2_A10

B_DDR3_A6/DDR2_A4
B_DDR3_A7/DDR2_A3
B_DDR3_A8/DDR2_A6

B_DDR3_A9/DDR2_A12

B_DDR3_A10/DDR2_RASZ

B_DDR3_A11/DDR2_A11

B_DDR3_A12/DDR2_A0
B_DDR3_A13/DDR2_A7

B_DDR3_BA0/DDR2_BA2

B_DDR3_BA1/DDR2_CASZ

B_DDR3_BA2/DDR2_A5

B_DDR3_MCLK/DDR2_MCLK

B_DDR3_MCLKZ/DDR2_MCLKZ

B_DDR3_CKE/DDR2_DQ5

B_DDR3_ODT/DDR2_ODT
B_DDR3_RASZ/DDR2_WEZ
B_DDR3_CASZ/DDR2_BA1

B_DDR3_WEZ/DDR2_BA0

B_DDR3_RESETB

B_DDR3_DQSL/DDR2_DQS0

B_DDR3_DQSLB/DDR2_DQSB0

B_DDR3_DQSU/DDR2_DQSB1
B_DDR3_DQSUB/DDR2_DQS1

B_DDR3_DML/DDR2_DQ13

B_DDR3_DMU/DDR2_DQ6

B_DDR3_DQL0/DDR2_DQ3
B_DDR3_DQL1/DDR2_DQ7
B_DDR3_DQL2/DDR2_DQ1

B_DDR3_DQL3/DDR2_DQ10

B_DDR3_DQL4/DDR2_DQ4
B_DDR3_DQL5/DDR2_DQ0
B_DDR3_DQL6/DDR2_CKE
B_DDR3_DQL7/DDR2_DQ2

B_DDR3_DQU0/DDR2_DQ15

B_DDR3_DQU1/DDR2_DQ9
B_DDR3_DQU2/DDR2_DQ8

B_DDR3_DQU3/DDR2_DQ11
B_DDR3_DQU4/DDR2_DQM1
B_DDR3_DQU5/DDR2_DQ12
B_DDR3_DQU6/DDR2_DQM0
B_DDR3_DQU7/DDR2_DQ14

B-TMA0

B-TMA2

B-TMA11

B-TMA1
B-TMA8
B-TMA6

B-TMBA0

B-TMA3
B-TMA5
B-TMA7

A25
B24
A24
P25
C24
P26
B26
R24
B25
T26
D24
A26
C25
T25

P24
C26
R26

D26
D25
E24

N25
M26
N24
N26

R25

J25
J24

H26
H25

F26
L24

L25
F24
L26
F25
M25
E26
M24
E25

G26
J26
G24
K25
H24
K26
G25
K24

B-TMA0
B-TMA1
B-TMA2
B-TMA3
B-TMA4
B-TMA5
B-TMA6
B-TMA7
B-TMA8
B-TMA9
B-TMA10
B-TMA11
B-TMA12
B-TMA13

B-TMBA0
B-TMBA1
B-TMBA2

B-TMCK
B-TMCKB
B-TMCKE

B-TMODT
B-TMRASB
B-TMCASB
B-TMWEB

B-TMRESETB

B-TMDQSL
B-TMDQSLB

B-TMDQSU
B-TMDQSUB

B-TMDML
B-TMDMU

B-TMDQL0
B-TMDQL1
B-TMDQL2
B-TMDQL3
B-TMDQL4
B-TMDQL5
B-TMDQL6
B-TMDQL7

B-TMDQU0
B-TMDQU1
B-TMDQU2
B-TMDQU3
B-TMDQU4
B-TMDQU5
B-TMDQU6
B-TMDQU7

B-TMA4
B-TMA12
B-TMBA1
B-TMA10

B-TMRESETB

B-TMBA2
B-TMA13

B-TMA9

B-TMCK

B-TMCKB

B-TMRASB
B-TMCASB

B-TMODT
B-TMWEB

B-TMDQSL

B-TMDQSLB

B-TMDQSU

B-TMDQSUB

B-TMDQL1
B-TMDQL3

B-TMDML

B-TMDQU2

B-TMCKE

B-TMDQL7
B-TMDQL5

B-TMDQL0
B-TMDQL2
B-TMDQL6
B-TMDQL4

B-TMDQU7
B-TMDQU3
B-TMDQU5

B-TMDMU

B-TMDQU6
B-TMDQU0
B-TMDQU4

B-TMDQU1

R1215

R1216

AR1211

AR1214

AR1215

R1217

R1218

AR1212

AR1213

AR1216

AR1217

AR1218

10

10

10

10

10

AR1219

10

R1222

R1223

AR1220

10

R1219

10

R1220

10

10

10

10

10

10

10

10

R1221

10

R123410K

B-MA0

B-MA2

B-MA11
B-MA1
B-MA8
B-MA6

B-MBA0
B-MA3
B-MA5
B-MA7

B-MA4
B-MA12
B-MBA1
B-MA10

B-MRESETB
B-MBA2
B-MA13
B-MA9

B-MCK

B-MCK

B-MCKB

B-MRASB
B-MCASB
B-MODT
B-MWEB

B-MDQSL

B-MDQSLB

B-MDQL1
B-MDQL3
B-MDML
B-MDQU2

B-MCKE
B-MDQL7
B-MDQL5

B-MDQL0
B-MDQL2
B-MDQL6
B-MDQL4

B-MDQU7
B-MDQU3
B-MDQU5
B-MDMU

B-MDQU6
B-MDQU0
B-MDQU4

B-MDQU1

B-MCKE

B-MCKB

VCC_1.5V_DDR

C1240

0.01uF
25V

R1232

10

10

B-MDQSU

B-MDQSUB

1%

1%

10K

56

R1237

56

R1238

B-MRASB
B-MCASB

B-MRESETB

B-MDQSL

B-MDQSLB

B-MDQSU

B-MDQSUB

B-MDQL0
B-MDQL1
B-MDQL2
B-MDQL3
B-MDQL4
B-MDQL5
B-MDQL6
B-MDQL7

B-MDQU0
B-MDQU1
B-MDQU2
B-MDQU3
B-MDQU4
B-MDQU5
B-MDQU6
B-MDQU7

B-MODT

B-MWEB

B-MDML
B-MDMU

B-MA0
B-MA1
B-MA2
B-MA3
B-MA4
B-MA5
B-MA6
B-MA7
B-MA8

B-MA9
B-MA10
B-MA11
B-MA12
B-MA13

B-MBA0
B-MBA1
B-MBA2

B-MCKE

IC1202

H5TQ1G63BFR-H9C

N3

A0

P7

A1

P3

A2

N2

A3

P8

A4

P2

A5

R8

A6

R2

A7

T8

A8

R3

A9

L7

A10/AP

R7

A11

N7

A12/BC

T3

A13

M7

A15

M2

BA0

N8

BA1

M3

BA2

J7

CK

K7

CK

K9

CKE

L2

CS

K1

ODT

J3

RAS

K3

CAS

L3

WE

T2

RESET

F3

DQSL

G3

DQSL

C7

DQSU

B7

DQSU

E7

DML

D3

DMU

E3

DQL0

F7

DQL1

F2

DQL2

F8

DQL3

H3

DQL4

H8

DQL5

G2

DQL6

H7

DQL7

D7

DQU0

C3

DQU1

C8

DQU2

C2

DQU3

A7

DQU4

A2

DQU5

B8

DQU6

A3

DQU7

VREFCA

VREFDQ

VDD_1
VDD_2
VDD_3
VDD_4
VDD_5
VDD_6
VDD_7
VDD_8
VDD_9

VDDQ_1
VDDQ_2
VDDQ_3
VDDQ_4
VDDQ_5
VDDQ_6
VDDQ_7
VDDQ_8
VDDQ_9

NC_1
NC_2
NC_3
NC_4
NC_6

VSS_1
VSS_2
VSS_3
VSS_4
VSS_5
VSS_6
VSS_7
VSS_8

VSS_9
VSS_10
VSS_11
VSS_12

VSSQ_1
VSSQ_2
VSSQ_3
VSSQ_4
VSSQ_5
VSSQ_6
VSSQ_7
VSSQ_8
VSSQ_9

M8

B-MVREFCA

H1

B-MVREFDQ

R1226

L8

ZQ

240

1%
B2
D9
G7
K2
K8
N1
N9
R1
R9

A1
A8
C1
C9
D2
E9
F1
H2
H9

J1
J9
L1
L9
T7

A9
B3
E1
G8
J2
J8
M1
M9
P1
P9
T1
T9

B1
B9
D1
D8
E2
E8
F9
G1
G9

VCC_1.5V_DDR

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

DDR3(256MB)

Ver. 1.0

21

/FLASH_WP

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

R1401

OPT

R1402
0

0

+3.3V_Normal

R1403

10K

C

Q1401

B

KRC103S

E

/SPI_CS

SPI_SDO

+3.3V_Normal

R1404

4.7K

S_FLASH

IC1401

MX25L8005M2I-15G

CS#

1

SO

2

WP#

3

GND

4

+3.3V_Normal

R1405
33

C1401

0.1uF

SPI_SCK

SPI_SDI

VCC

8

HOLD#

7

SCLK

6

SI

5

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M
S-Flash(1MB)

Ver. 1.2

23

LGIT CAN H/N TUNER for US&KOR&BRAZIL&TAIWAN&AUS

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

RF_S/W_CTL

1

BST_CTL

2

+B1[5V]

3

NC_1[RF_AGC]

4

NC_2

5

SCLT

6

SDAT

7

NC_3

8

SIF

9

NC_4

10

VIDEO

11

GND

12

+B2[1.2V]

13

+B3[3.3V]

14

RESET

15

IF/AGC

16

DIF_1[N]

17

DIF_2[P]

18

19

SHIELD

TU5001-*1
TDTR-T035F

NTSC_2INPUT_H_LGIT

ANT_PWR[OPT]

1

BST_CNTL

2

+B

3

NC[RF_AGC]

4

AS

5

SCL

6

SDA

7

NC(IF_TP)

8

SIF

9

NC

10

VIDEO

11

GND

12

1.2V

13

3.3V

14

RESET

15

IF_AGC_CNTL

16

DIF_1

17

DIF_2

18

19

SHIELD

TU5001-*2
TDVJ-H031F

NTSC_1INPUT_V_LGIT

ANT_PWR[OPT]

1

BST_CNTL

2

+B

3

NC[RF_AGC]

4

AS

5

SCL

6

SDA

7

NC(IF_TP)

8

SIF

9

NC

10

VIDEO

11

GND

12

1.2V

13

3.3V

14

RESET

15

IF_AGC_CNTL

16

DIF_1

17

DIF_2

18

19

SHIELD

TU5001-*3
TDVJ-H001F

NTSC_1INPUT_H_LGIT

NTSC_1INPUT_H_SANYO

TU5001-*4

UDA45AL

ANT_PWR[OPT]

1

BST_CNTL

2

+B

3

NC[RF_AGC]

4

AS

5

SCL

6

SDA

7

NC(IF_TP)

8

SIF

9

NC

10

VIDEO

11

GND

12

1.2V

13

3.3V

14

RESET

15

IF_AGC_CNTL

16

DIF_1

17

DIF_2

18

19

SHIELD

DVB_1INPUT_H_LGIT

TU5001
TDTJ-S001D

ANT_PWR[OPT]

1

BST_CNTL

2

+B

3

NC[RF_AGC]

4

AS

5

SCL

6

SDA

7

NC[IF_TP]

8

SIF

9

NC

10

VIDEO

11

GND

12

1.2V

13

3.3V

14

RESET

15

IF_AGC_CNTL

16

DIF_1

17

DIF_2

18

19

SHIELD

R5002

0

RF_S/W_OPT

R5001

0

RF_AGC_OPT

R5003

0

+1.2V/+1.8V_TU

C5001
100pF
50V

C5002

0.1uF

16V

RF_S/W_OPT

+5V_TU

C5003

0.1uF
16V

OPTION : RF S/W

RF_SWITCH_CTL

Pull-up can’t be applied
because of MODEL_OPT_2

+3.3V_TU

C5006

C5007

100pF

0.1uF

50V

16V

R5009
100

NON_DEMOD_OPT

0

R5035

+3.3V_TU

R5011
100K

C5010

0.1uF

16V

NON_BR_TU_I2C

TUNER_RESET

NON_DEMOD_OPT

R5034

Q5001

ISA1530AC1

BOOSTER_OPT

0

+5V_TU

C5011

0.01uF
25V
BOOSTER_OPT

C5012
18pF
50V

NON_BR_TU_I2C

L5001

MLB-201209-0120P-N2
BOOSTER_OPT

R5014
0

BOOSTER_OPT

E

B

C

33

NON_BR_TU_I2C

33

NON_BR_TU_I2C
C5013
18pF
50V

IF_N_MSTAR

IF_P_MSTAR

R5017

2.2K

BOOSTER_OPT

BOOSTER_OPT

NON_BR_TU_I2C

R5018

1.2K

R5015

R5016

Q5002

2SC3052

+3.3V_TU

R5019
10K
BOOSTER_OPT

C

BOOSTER_OPT

B

E

NON_BR_TU_I2C

R5020

1.2K

R5006 100

DEMOD_OPT

R5007 100

DEMOD_OPT

OPTION : BOOSTER

R5021

10K

TU_SCL

TU_SDA

LNA2_CTL

The pull-up/down of LNA2_CTL
is depended on MODLE_OPT_1.
GPIO must be added for FE_BOOSTER_CTL

Option name:BR_TU_I2C
BRAZIL model use I2C Standard Mode

BR_TU_I2C

R5018-*1

3.3K

BR_TU_I2C

R5015-*1
100

1/16W
5%

BR_TU_I2C

C5012-*1
47pF
50V

C5016

0.1uF
16V

OPT

Close to the tuner

R5022
1K

BR_TU_I2C

R5020-*1

3.3K

BR_TU_I2C

R5016-*1
100

1/16W
5%

BR_TU_I2C

C5013-*1
47pF
50V

should be guarded by ground

IF_N_EXT

IF_P_EXT

IF_AGC

C5025

0.1uF 16V

R5024

C5026

0

0.1uF
16V
RF_AGC_OPT

RF_AGC_OPT

Q5003

2SC3052

C5027
10uF
10V

RF_AGC_OPT

C

B

E

R5025

4.7K

R5026

1K

OPT

TU_CVBS_BYPASS

R5027

1K

OPT

R5028
10K

RF_AGC_OPT

+5V_TU

R5029

470

B

+5V_TU

R5030

220

NON_TU_CVBS_BYPASS

R5039

0

B

OPTION : RF AGC

IF_AGC_SEL

R5032

E

C

E

Q5005

C

82

ISA1530AC1

Q5004

R5031

220

NON_TU_CVBS_BYPASS

ISA1530AC1

GPIO must be added.

TU_SIF

TU_CVBS

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

+3.3V_TU

C5031

0.1uF
16V

IC5001

AZ1117H-ADJTRE1(EH11A)

INPUT

3

2

OUTPUT

1

ADJ/GND

R5038

1.2K

R5036

10

+1.2V/+1.8V_TU

R5033

1

C5029
10uF
10V

C5028

0.1uF
16V

60mA

200mA

+5V_TU

C5018
22uF
16V

OPT

C5017
22uF
16V

OPT

C5019
22uF
16V

+3.3V_TU

C5020
22uF
16V

+5V_Normal

L5002

BLM18PG121SN1D

C5021

0.1uF
16V

+3.3V_Normal

L5003

BLM18PG121SN1D

C5022

0.1uF
16V

*Change History.

C5023

0.1uF
16V

C5024

0.1uF

16V

GP2_Saturn7M

ATSC_CAN TUNER

Ver 1.0 --> 1.1:Change of chip type, 091019, w.s.jeong
Ver 1.1 --> 1.2:Change of chip type, Add of Tuner P/N for NTSC_1INPUT

1.De-reting

1) R5029,R5030,R5031 : 1005 Type ==> 1608 Type(w.s.Jeong_1019)

2) R5030,R5031 : 200/1608 Type ==> 220/2012 Type(w.s.Jeong_1116)

2.ADD of TUNER P/N (w.s.Jeong_1116)

CONTROL_ATTEN

This was being applied to the only china demod,
so this has to be deleted in both main and ISDB sheet.

Ver. 1.1

26

฀฀

091116, w.s.jeong

PANASONIC (ISDB-T)

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

MN884433

IF_N_EXT

IF_P_EXT

ISDB_DEMOD

C2901 0.1uF
C2902 0.1uF

ISDB_DEMOD

+1.2V_DE

C2903 0.1uF

ISDB_DEMOD

C2904 0.1uF
ISDB_DEMOD

C2905 0.1uF

C2906 0.1uF

ISDB_DEMOD

R2903

1%

10K

C2907 0.1uF
C2908 0.1uF
C2909 0.1uF

IF_AGC_ISDB

+3.3V_DE

ISDB_DEMOD

ISDB_DEMOD

ISDB_DEMOD
ISDB_DEMOD

ISDB_DEMOD

ISDB_DEMOD

R2904 2.2K
R2905 2.2K

ISDB_DEMOD

ISDB_DEMOD

R2907 2.2K

ISDB_DEMOD

R2908 2.2K

R2906

ISDB_DEMOD

ISDB_DEMOD

C2910

0.1uF

VSS_1

AVDD_S

AII_S
AIQ_S

AVSS_S

VRT_S

VRB_S
TCPO_S
VDDL_1
MSCL_S
MSDA_S

VSS_2

VSSH
PSEL
ZSEL

VDDL_2

ACKI

TCPO_T

IR_T
VRT_T
VRB_T

AVDD_T

AIN_T
AIP_T

AVSS_T

10K

AGC_S

100

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

26

27

VSS_3

MSCL_T28MSDA_T29VDDH_1

ISDB_DEMOD

C2912

0.1uF
16V

ISDB_DEMOD

C2913

0.1uF
16V

ISDB_DEMOD
C2911

0.1uF
16V

30

GPO1

ISDB_DEMOD

ISDB_DEMOD

ISDB_DEMOD

C2916

0.1uF
16V

VSS_1192VDDL_793SCKB94TEST095SDOB96PCKB97DENB98GPO299VDDH_5

91

IC2901

MN884433

ISDB_DEMOD

31

33

34

35

GPO0

VSS_4

AGCI_T32AGCR_T

VDDL_3

ISDB_DEMOD

C2914

0.1uF
16V

ISDB_OPT

ISDB_DEMOD

C2915
15pF
50V

C2917

0.1uF
16V

36XO37XI38

R2909
1M

X2901
25MHz

ISDB_DEMOD

C2920

0.1uF
16V

39

GPI140GPI0

VDDH_2

C2918

0.1uF
16V

ISDB_DEMOD

ISDB_DEMOD

ISDB_DEMOD

C2919
15pF
50V

ISDB_DEMOD

C2922

0.1uF
16V

HDVPP86RON87NC_388HDVDDH89NC_490HDVDDL1

85

41

TEST442SHVPP

SHVDDH

C2921

0.1uF
16V

ISDB_DEMOD

43

44

NC_1

C2923

0.1uF
16V

45

VSS_5

46

VDDL_4

47

49

TCK48TDI

NRST

ISDB_DEMOD
C2924

0.1uF
16V

TEST177TEST278SCKA79GPI280SDOA81PCKA82DENA83VDDH_484VSS_10

76

50

TEST3

ISDB_DEMOD

R2910 22

ISDB_DEMOD

R2911 22

ISDB_DEMOD

R2912 22

ISDB_DEMOD

R2913 22

VSS_9

75

INTB

74

INTA

73

SADR

72

VDDH_3

71

SCL

70

SDA

69

VSS_8

68

HDVDDL0

67

SADR_S

66

NC_2

65

SADR_T

64

VDDL_6

63

VSS_7

62

ERRB

61

SYNCB

60

ERRA

59

SYNCA

58

TDO

57

CSEL1

56

CSEL0

55

TMS

54

TRST

53

VDDL_5

52

VSS_6

51

ISDB_DEMOD

C2926 0.1uF

ISDB_DEMOD

C2927 0.1uF

ISDB_DEMOD

C2928 0.1uF

ISDB_DEMOD

C2925 0.1uF

FE_TS_VAL_ERR

FE_TS_SYNC

FE_TS_DATA[0]

(FE_TS_SERIAL)

FE_TS_CLK

OPT

R2914

2.2K

+3.3V_DE

R2915

2.2K

OPT

AMP_I2C HAVE PULL-UP

DEMOD_SCL
DEMOD_SDA

FE_TS_DATA[0]

(FE_TS_SERIAL)

ISDB_DEMOD

TP2901ISDB_DEMOD

TP2902ISDB_DEMOD

TP2903ISDB_DEMOD

TP2904ISDB_DEMOD

TP2905

TP2906ISDB_DEMOD

TP2907ISDB_DEMOD

FE_TS_DATA[0-7]

FE_TS_DATA[0]

FE_TS_DATA[1]

FE_TS_DATA[2]

FE_TS_DATA[3]

FE_TS_DATA[4]

FE_TS_DATA[5]

FE_TS_DATA[6]

FE_TS_DATA[7]

DEMOD_RESET

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M Ver. 1.0

ISDB-T Demodulator

28

Panasonic Demodulator Power(3.3V,1.2V)

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

ISDB_POWER

IC3001

SC4215ISTRT

NC_1

EN

VIN

NC_2

1

2

3

4

GND

8

7

6

5

ADJ

VO

NC_3

ISDB_POWER

R3004

5.1K

10K

R3003

ISDB_POWER

+1.2V_DE

ISDB_POWER

C3005

0.1uF
16V

ISDB_POWER

C3006
22uF
16V

+3.3V_Normal

0.1uF

ISDB_POWER

C3001

ISDB_POWER

L3001

BLM18PG121SN1D

+3.3V_DE

0.1uF

ISDB_POWER

C3002

+3.3V_DE

ISDB_POWER

C3003

0.1uF
16V

ISDB_POWER
C3004

10uF
10V

IF AGC SELECTION

IF_AGC_ISDB

R3001

0

IF_AGC

ISDB_DEMOD

R3002

MSTAR DEMOD

0

IF_AGC_MAIN

TP3002

IF_AGC_SEL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M Ver. 1.0

Demodulator

29

SCART OPTION BLOCK

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

SC1_CVBS_IN

JK3801

PPJ238-01

NON_CI_30

TP3801

TP3802

TP3803
TP3804
TP3805

TP3806

TP3807

TP3808

TP3809

[RD1]E-LUG

6C

[RD1]O-SPRING

5C

[RD1]CONTACT

4C

[WH1]O-SPRING

5B

[YL1]CONTACT

4A

[YL1]O-SPRING

5A

[YL1]E-LUG

6A

[RD2]E-LUG

6H

[RD2]O-SPRING_2

5H

[RD2]CONTACT

4H

[WH2]O-SPRING

5G

[RD2]O-SPRING_1

5F

[RD2]E-LUG-S

7F

[BL2]O-SPRING

5E

[BL2]E-LUG-S

7E

[GN2]CONTACT

4D

[GN2]O-SPRING

5D

[GN2]E-LUG

6D

SC1_FB

SC1_ID

SC_RE1
SC_RE2

SCART1_MUTE

SC1_SOG_IN

SCART1_Lout

SCART1_Rout

DTV/MNT_VOUT

JK3802

PPJ239-01
NON_CI_4/5/60

[RD1]E-LUG

6H

[RD1]O-SPRING_2

5H

[RD1]CONTACT_2

4H

[WH1]O-SPRING

5G

[RD1]CONTACT_1

4F

[RD1]O-SPRING_1

5F

[RD1]E-LUG-S

7F

[BL1]O-SPRING

5E

[BL1]E-LUG-S

7E

[GN1]CONTACT

4D

[GN1]O-SPRING

5D

[GN1]E-LUG

6D

[RD2]E-LUG

6N

[RD2]O-SPRING_2

5N

[RD2]CONTACT

4N

[WH2]O-SPRING

5M

[RD2]O-SPRING_1

5L

[RD2]E-LUG-S

7L

[BL2]O-SPRING

5K

[BL2]E-LUG-S

7K

[GN2]CONTACT

4J

[GN2]O-SPRING

5J

[GN2]E-LUG

6J

D3801

5.6V

+3.3V_Normal

R3802
10K

C3801

100pF

50V

OPT

R3803
1K

AV_CVBS_DET

+3.3V_Normal

R3804

10K

D3802

5.6V

R3805
1K

001:AR23

SC1/COMP1_DET

D3811
30V

D3809

30V

D3808
30V

SC1/COMP1_DET

R3811
0

R3809
0

R3810

0

D3807

5.6V

D3806

5.6V

D3803
30V

D3805
30V

D3804
30V

R3817
75

R3815
75

R3818

75

R3806
0

D3812

5.6V

D3810

5.6V

R3808
0

R3807
0

+3.3V_Normal

R3822

10K

D3813

5.6V

R3821
470K

R3820
470K

OPT

C3810
10pF
50V

OPT
C3808

10pF
50V

C3813

0.47uF

OPT
C3806

10pF
50V

R3819
470K

R3816
470K

R3812
75

R3813
75

R3814

75

AV_CVBS_DET

25V
OPT

C3802
10pF
50V

OPT
C3803

10pF
50V

R3827
1K

C3807
1000pF
50V

C3805
1000pF
50V

OPT

C3804
10pF
50V

OPT

R3852

4.7K

OPT

C3811
1000pF
50V

R3823
10K

C3809
1000pF
50V

R3826
10K

R3825
10K

R3824
10K

R3851

3.6K

R3848
0

R3860
0

R3853

R3861
0

R3828
12K

12K

R3830
12K

OPT

82

OPT
R3854

82

R3829

12K

R3831

B

OPT
R3833
0

OPT
R3835
0

SC1_B+/COMP1_Pb+

SC1_B-/COMP1_Pb-

+5V_Normal

R3857

OPT

0

C

Q3802
2SC3052

E

R3855

270

R3858
0

OPT

B

+5V_Normal

R3859

0

OPT

C

Q3803
2SC3052

E

R3838

0

R3856

270

COMP2_R_IN

RESULT

COMP2_L_IN

COMP2_DET

AV_R_IN

SC1/COMP1_R_IN

AV_L_IN

SC1/COMP1_L_IN

AV_CVBS_IN

SC1_R+/COMP1_Pr+

SC1_R-/COMP1_Pr-

AV_CVBS_IN2

SC1_G+/COMP1_Y+

OPT

SC1_G-/COMP1_Y-

COMP2_Pr+

COMP2_Pr-

COMP2_Pb+

COMP2_Pb-

COMP2_Y+

COMP2_Y-

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

SC1/COMP1_DETHIGH HIGH

HIGH SC1/COMP1_DET

LOW

HIGHLOW

LOW

AV_CVBS_DET

LOW

GP2_Saturn7M Ver. 1.1

NON CI LOW

31

[LEFT FFC Connector]

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

(60Pin Mini-LVDS)

P701

104060-6017

MINI_LVDS

1 GND
2 GMA1
3 GMA3
4 GMA4
5 GMA6
6 GMA7
7 GMA9
8 GMA10

9 GMA12
10 GMA13
11 GMA15
12 GMA16
13 GMA18
14 GND
15 OPT_N
16 H_CONV
17 VST_IN
18 POL
19 SOE
20 GND
21 LV0+
22 LV0­23 LV1+
24 LV1­25 LV2+
26 LV2­27 LVCLK+
28 LVCLK­29 LV3+
30 LV3­31 LV4+
32 LV4­33 LV5+
34 LV5­35 GND
36 VCC
37 VCC
38 GND
39 HALF_VDD
40 HALF_VDD
41 VDD
42 VDD
43 GND
44 VCOM_IN
45 VCOM_FB
46 GND
47 VST
48 VSS
49 VGH_EVEN
50 VGH_ODD
51 VGI_P
52 VGI_N
53 CLK6
54 CLK5
55 CLK4
56 CLK3
57 CLK2
58 CLK1
59 Z_OUT
60 GND

61

.

R729

R701

GMA1
GMA3
GMA4
GMA6
GMA7
GMA9
GMA10
GMA12
GMA13
GMA15
GMA16
GMA18

H_CONV
GSP/GVST_I
POL
SOE

RXD1­RXD1+
RXD0­RXD0+
RXC4­RXC4+
RXC3­RXC3+
RXC2­RXC2+
RXC1­RXC1+
RXC0­RXC0+

VCOML
VCOMLFB

GIP

0

GIP

0

VST

VDD_EVEN
VDD_ODD
VGI_P
VGI_N
CLK6
CLK5
CLK4
CLK3
CLK2
CLK1
Z_OUT

VCC_LCM

VGL_I

R745

R773
NON_GIP

R700

3.3K
MINI_LVDS

HVDD

3.3K

C701

0.1uF
16V
MINI_LVDS

C711
10uF
16V
MINI_LVDS

NON_GIP

0

VCC_LCM

VCC_LCM

VGL

(-5V)

C703

0.01uF
50V

MINI_LVDS

10uF/25V(3216)

C702

MINI_LVDS

10uF

VDD_LCM

C704

0.1uF
50V

MINI_LVDS

[Right FFC Connector]
(60Pin Mini-LVDS)

P702

104060-6017

MINI_LVDS

1 GND
2 Z_OUT
3 CLK1
4 CLK2
5 CLK3
6 CLK4
7 CLK5
8 CLK6

9 VGI_N
10 VGI_P
11 VGH_ODD
12 VGH_EVEN
13 VSS
14 VST
15 GND
16 VCOM_FB
17 VCOM_IN
18 GND
19 VDD
20 VDD
21 HALF_VDD
22 HALF_VDD
23 GND
24 VCC
25 VCC
26 GND
27 RV0+
28 RV0­29 RV1+
30 RV1­31 RV2+
32 RV2­33 RVCLK+
34 RVCLK­35 RV3+
36 RV3­37 RV4+
38 RV4­39 RV5+
40 RV5­41 GND
42 SOE
43 POL
44 VST_IN
45 H_CONV
46 OPT_N
47 GND
48 GMA18
49 GMA16
50 GMA15
51 GMA13
52 GMA12
53 GMA10
54 GMA9
55 GMA7
56 GMA6
57 GMA4
58 GMA3
59 GMA1
60 GND

61

.

NON_GIP

NON_GIP

R748 0

R749 0

NON_GIP

NON_GIP

R751 0

R750 0

R765

NON_GIP

NON_GIP

R752 0

R753 0

R754 0

GIP

0

VCOMRFB
VCOMR

RXA1­RXA1+
RXA0­RXA0+
RXB4­RXB4+
RXB3­RXB3+
RXB2­RXB2+
RXB1­RXB1+
RXB0­RXB0+

SOE
POL
GSP/GVST_I
H_CONV

GMA18
GMA16
GMA15
GMA13
GMA12
GMA10
GMA9
GMA7
GMA6
GMA4
GMA3
GMA1

MINI_LVDS

CLK1
CLK2
CLK3
CLK4
CLK5
CLK6
VGI_N
VGI_P
VDD_ODD
VDD_EVEN

VST

VCC_LCM

VGL_I

HVDD

MINI_LVDS

C706

0.1uF
16V

MINI_LVDS

R703

3.3K
MINI_LVDS

R767
R768

R769
R770

R771
R772

C712
10uF
16V

Z_OUT

VCC_LCM

NON_GIP

0

NON_GIP

0

NON_GIP

0

NON_GIP

0

NON_GIP

0

NON_GIP

0

10uF/25V(3216)

C705

10uF

MINI_LVDS

C708

0.01uF
50V

MINI_LVDS

VGH_M

(+25V)

VDD_LCM

VGL

(-5V)

C707

0.1uF
50V

MINI_LVDS

GSC/GCLK3_I
GOE/GCLK1_I

[51Pin LVDS Connector]
(For FHD 60/120Hz)

P703

TF05-51S

WAFER_FHD

52

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

PANEL_VCC

R713 0

NON_SCAN

L702

120-ohm

WAFER_FHD

C700
10uF
16V

OPT

R720 0

OPT

R721 0

OPT

R728 0

OPT

R723 0

OPT

R702 33

3D

R706 33

240Hz

R707 33

240Hz/3D

R708 33

240Hz/3D

R704 33

3D

WAFER_FHD

RXACK-

RXACK+

RXA2-

RXA2+

RXA1-

RXA1+

RXA0-

RXA0+

RXB4-

RXB4+

RXB3-

RXB3+

RXBCK-

RXBCK+

RXB2-

RXB2+

RXB1-

RXB1+

RXB0-

RXB0+

C710

C709

0.1uF

1000pF

16V

50V

WAFER_FHD

RXA4-

RXA4+

RXA3-

RXA3+

BIT_SEL

R709
10K

BIT_SEL_LOW

SCAN_BLK2

OPC_EN

SCAN_BLK1/OPC_OUT

PWM_DIM

/3D_FPGA_RESET
FRC_RESET

I2C_SCL

I2C_SDA

3D_POWER_EN

LVDS_SEL

+3.3V_Normal

R705

3.3K

LVDS_SEL_HIGH

R710

10K

LVDS_SEL_LOW

[41Pin LVDS Connector]
(For FHD 120Hz)

P704

TF05-41S

WAFER_FHD_120HZ

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

[30Pin LVDS Connector]
(For HD 60Hz_Normal)

P705

FF10001-30

WAFER_HD

RXD4-

RXD4+

RXD3-

RXD3+

RXDCK-

RXDCK+

RXD2-

RXD2+

RXD1-

RXD1+

RXD0-

RXD0+

RXC4-

RXC4+

RXC3-

RXC3+

RXCCK-

RXCCK+

RXC2-

RXC2+

RXC1-

RXC1+

RXC0-

RXC0+

C714

C713

1000pF

10uF

50V

16V

3D

OPT

1

2

R716 0

WAFER_HD

3

R717 0

4

R714 0

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

R724 0

22

23

24

25

26

27

28

29

30

31

L703

120-ohm

C715

0.1uF
16V

3D

3D

PWM_DIM

OPT

OPC_OUT

OPT

RXA3-

RXA3+

RXACK-

RXACK+

RXA2-

RXA2+

RXA1-

LVDS_SEL

RXA1+

+3.3V_Normal

RXA0-

RXA0+

OPC_EN

OPT

PANEL_VCC

PANEL_VCC

LVDS_SEL_HIGH

LVDS_SEL_LOW

L701

120-ohm

WAFER_HD

R712

3.3K

R711

10K

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

LVDS

Ver. 1.3

36

+3.3V_Normal

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

C434

0.1uF
16V

IC404

AP1117E18G-13

Vd=1.4V

3IN1

2

OUT

ADJ/GND

R474

+1.8V_AMP

1

C446

C421

0.1uF

10uF

16V

10V

120 mA

+24V

AUD_LRCH

AUD_LRCK

AUD_SCK
AMP_SDA
AMP_SCL

+1.8V_AMP

L501

BLM18PG121SN1D

OPT
C501

10uF

10V

AMP_RESET_N

AUD_MASTER_CLK

+1.8V_AMP

L502

BLM18PG121SN1D

C502

0.1uF
16V

OPT
C503

10uF

10V

R503 100

R504 100
R505 100

R506 33
R507 33

C506

1000pF

50V

C504
100pF

0.1uF

50V

C505

16V

C509

0.1uF

C508
1000pF

50V

R508

3.3K

C507
18pF
50V

+3.3V_Normal

L504

BLM18PG121SN1D

TP502

C510
18pF
50V

C546
22pF
50V

OPT

C51 2

1uF 25V

+1.8V_AMP

OPT
C511
10uF

10V

C544
22pF
50V

OPT

C514

22000pF

BST1A
VDR1A

/RESET

DGND_1
GND_IO

CLK_I

VDD_IO
DGND_PLL
AGND_PLL

AVDD_PLL
DVDD_PLL

C545
22pF
50V

OPT

50V

AD

LF

GND

C513

0.1uF
16V

1
2
3
4
5
6
7
8
9
10
11
12
13
14

EP_PAD

OUT1A_1

OUT1A_2

PGND1A_1

PGND1A_2

54

55

56

THERMAL

57

IC501

EAN60969601

NTP-7000

15

16

17

WCK19BCK20SDA21SCL

DVDD

SDATA

DGND_2

PVDD1A_2

52

53

18

PVDD1B_1

PVDD1B_2

PVDD1A_1

50

51

MONITOR023MONITOR124MONITOR2

C515

0.1uF
50V

PGND1B_2

OUT1B_1

OUT1B_2

46

47

48

49

22

25

VDR2B27BST2B

/FAULT

C51 7
1uF
25V

C516
1000pF
50V

AMP_MUTE_HOTEL

26

C519

0.1uF
50V

C518
22000pF
50V

C520
1uF
25V

VDR1B44BST1B45PGND1B_1

43

42
41
40
39
38
37
36
35
34
33
32
31
30
29

28

PGND2B_1

C521
10uF
35V

NC
VDR2A
BST2A
PGND2A_2
PGND2A_1
OUT2A_2
OUT2A_1
PVDD2A_2
PVDD2A_1
PVDD2B_2
PVDD2B_1
OUT2B_2
OUT2B_1
PGND2B_2

R514 100

C52 2

R513
0

OPT

1uF25V

C524
22000pF

50V

C525

22000pF

50V

R515

10K

Q501

2SC3052

OPT

R535

3.3

+3.5V_ST

C526

0.1uF
50V

C

E

OPT

C547

0.01uF
50V

+24V

POWER_DET

B

C527

0.1uF
50V

R517

10K

D501

1N4148W

100V

OPT

D502

1N4148W

100V

OPT

D503

1N4148W

100V

OPT

D504

1N4148W

100V

OPT

C528
10uF
35V

R519

12

C529
390pF

50V

C530
390pF

50V

R520

12

R521

12

C531
390pF

50V

C532
390pF

50V

R522

12

AMP_MUTE

R524

R525

R523

R526

12

12

12

12

L507

AD-9060

2S

1S 1F

15uH

L506

AD-9060

2S

1S 1F

15uH

2F

2F

C534

0.47uF
50V

C535

0.47uF

50V

C536

0.1uF
50V

C537

0.1uF
50V

C538

0.1uF
50V

C539

0.1uF

50V

SPK_L+

SPK_L-

SPK_R+

SPK_R-

R527

4.7K

R528

4.7K

R529

4.7K

R530

4.7K

R536
0

R537
0

R538
0

R539
0

0.01uF
50V

R531

3.3

R532

3.3
C541

0.01uF
50V

C542

0.01uF
50V

R533

3.3

R534

3.3
C543

0.01uF
50V

OPT

OPT

OPT

OPT

OPT

OPT

OPT

OPT

C540

SPK_L+

SPK_L-

SPK_R+

SPK_R-

WAFER-ANGLE

4

3

2

1

P501

SPK_SLIM

SPEAKER_L

SPEAKER_R

4

3

2

1

SMAW250-04

P502

SPK_NORMAL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

AUDIO[NTP]

Ver. 1.1

38

NOT USING B/T

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

BT_ON/OFF

BT_DM

BT_DP

BT_LOUT

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

NON B/T

Ver. 1.0

44

NON CI Region

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

/PCM_CD

PCM_5V_CTL

/PCM_CE

/PCM_IRQA

FE_TS_SYNC

FE_TS_VAL_ERR

FE_TS_CLK

CI_TS_DATA[0]
CI_TS_DATA[1]
CI_TS_DATA[2]
CI_TS_DATA[3]
CI_TS_DATA[4]
CI_TS_DATA[5]
CI_TS_DATA[6]
CI_TS_DATA[7]

/PCM_REG

/PCM_OE

/PCM_WE

/PCM_IORD

/PCM_IOWR

PCM_RST

/PCM_WAIT

CI_TS_CLK

CI_TS_VAL

CI_TS_SYNC

PCM_A[0]
PCM_A[1]
PCM_A[2]
PCM_A[3]

PCM_A[4]
PCM_A[5]
PCM_A[6]
PCM_A[7]
PCM_A[8]

PCM_A[9]
PCM_A[10]
PCM_A[11]

PCM_A[12]
PCM_A[13]
PCM_A[14]

FE_TS_DATA[0-7]

PCM_D[0-7]

FE_TS_DATA[0]
FE_TS_DATA[1]
FE_TS_DATA[2]
FE_TS_DATA[3]

FE_TS_DATA[4]
FE_TS_DATA[5]
FE_TS_DATA[6]

FE_TS_DATA[7]

PCM_D[0]
PCM_D[1]
PCM_D[2]
PCM_D[3]

PCM_D[4]
PCM_D[5]
PCM_D[6]
PCM_D[7]

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M Ver. 1.0

PCMCI

46

NON ETHERNET

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

TP2101

TP2102

TP2103

TP2104

TP2105

TP2106

TP2107

TP2108

TP2109

TP2110

TP2111

EPHY_RXD0

EPHY_RXD1
EPHY_TXD1

EPHY_TXD0

EPHY_REFCLK

EPHY_CRS_DV
EPHY_MDIO

ET_RXER
/RST_PHY

EPHY_MDC

EPHY_EN

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

NON ETHERNET

Ver. 1.0GP2_Saturn7M

48

NON Motion Remocon Region

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

TP2501

TP2502

TP2503

TP2504

M_REMOTE_RX

M_REMOTE_TX

RF_RESET

RF_ENABLE

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

NON M REMOCON

Ver. 1.0

50

NON CHINA HOTEL

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

AMP_MUTE_HOTEL

SPK_R+_HOTEL

SPK_R-_HOTEL

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

NON CHINA HOTEL

Ver. 1.0

52

/PIF_SPI_CS

Copyright © 2010 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

LGE Internal Use Only

R6001 0

CHB_CVBS_IN

THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES
SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION.
FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS
ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR
THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

GP2_Saturn7M

NON CHB

Ver. 1.0

68