LG 55LB700T, 65LB650T, 70LB720T, 50LB650T Owner's Manual [es]

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Click! User Guide

Please read this manual carefully before operating your set and retain it for future reference.

42LB6500	39LB650T	42LB700T	70LB720T
47LB6500	42LB650T	47LB700T
50LB6500	47LB650T	55LB700T
55LB6500	50LB650T
60LB6500	55LB650T
	60LB650T
	65LB650T

*MFL68027804*	www.lg.com

P/NO : MFL68027804 (1404-REV03)

<![if ! IE]>

<![endif]>ENGLISH

2 IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

yyDo not use this apparatus near water.

yyClean only with a dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS 3

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyCAUTION concerning the Power Cord (Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and

if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with

the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yyGrounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power Supply

Short-circuit

Breaker

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification

could void the user’s authority to operate this product.

yyOutdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna

system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-

up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Antenna Discharge Unit

Electric Service

(NEC Section 810-20)

Equipment

Grounding Conductor

Ground Clamp

(NEC Section 810-21)

Power Service Grounding

NEC: National Electrical Code

Electrode System

(NEC Art 250, Part H)

yyCleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

yyMoving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

yyVentilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yyKeep the product away from direct sunlight.

yyNever touch this apparatus or antenna during a thunder or lightning storm. yyWhen mounting a TV on the wall, make

sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyDisconnecting the Main Power

The power outlet used with this device must remain easily accessible.

yyStore the accessories (battery, etc.) in a safe location out of the reach of children.

yyThis apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

yyDo not dispose of batteries in a fire. yyDo not short circuit, disassemble or allow

the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS 5

yyDot Defect

Preventing Image burn or Burn-in on

The Plasma or LCD panel is a high

your TV screen

technology product with resolution of

two million to six million pixels. In a very

few cases, you could see fine dots on the

screen while you’re viewing the TV. Those

dots are deactivated pixels and do not

affect the performance and reliability of the

yyIf a fixed image displays on the TV screen

TV.

yyGenerated Sound

for a long period of time, it will be imprinted

Cracking noise A cracking noise that

and become a permanent disfigurement on

occurs when watching or turning off the TV

the screen. This is image burn or burn-in

is generated by plastic thermal contraction

and not covered by the warranty.

due to temperature and humidity. This

yyIf the aspect ratio of the TV is set to 4:3

noise is common for products where

for a long period of time, image burn

thermal deformation is required.

may occur on the letterboxed area of the

Electrical circuit humming/panel buzzing

screen.

A low level noise is generated from a high-

yyAvoid displaying a fixed image on the TV

speed switching circuit, which supplies

screen for a long period of time (2 or more

a large amount of current to operate a

hours for LCD, 1 or more hours for the

product. It varies depending upon the

Plasma TV) to prevent image burn.

product.

This generated sound does not affect the

performance and reliability of the product.

yyTake care not to touch the ventilation

openings. When watching the TV for

a long period, the ventilation openings

may become hot. This does not affect

the performance of the product or cause

defects in the product.

yyDo not install this product on a wall if it

could be exposed to oil or oil mist. This

may damage the product and cause it to

fall.

yyIf the TV feels cold to the touch, there

may be a small “flicker” when it is turned

on. This is normal, there is nothing wrong

with TV. Some minute dot defects may be

visible on the screen, appearing as tiny red,

green, or blue spots. However, they have

no adverse effect on the TV’s performance.

Avoid touching the LCD screen or holding

your finger(s) against it for long periods

of time. Doing so may produce some

temporary distortion effects on the screen.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

yyViewing Time

-When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.

yyDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or

discomfort in viewing may be experienced. yyIf you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yyIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yyDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

yyWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides.

-Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

CAUTION

Viewing Environment

yyViewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yyInfants / Children

-Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

-Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

-Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yyTeenagers

-Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

yyElderly

-The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yyMake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

yyDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

yyUsing modified 3D glasses may cause eye strain or image distortion.

yyDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

yyThe 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE 7

LICENSES

Supported licenses may differ by model.

For more information about licenses, visit www.lg.com .

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail] . This offer is valid for three (3) years from the date on which you purchased the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8 TABLE OF CONTENTS

TABLE OF CONTENTS

2IMPORTANT SAFETY INSTRUCTIONS

6Viewing 3D Imaging

7LICENSES

7OPEN SOURCE SOFTWARE NOTICE

8TABLE OF CONTENTS

9INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking

11Optional Extras

12Parts and Buttons

13- Using the Joystick Button

14Lifting and moving the TV

15Setting Up the TV

15 - Attaching the Stand

17- Mounting on a Table

18- Tidying Cables

18 - Mounting on a Wall

20 MAKING CONNECTIONS

20Connecting to an antenna or cable

21Connecting to a HD receiver, DVD Player, or VCR

21- HDMI Connection

22- DVI to HDMI Connection

23- Connecting to a mobile phone

24- Component Connection

25- Composite Connection

26Connecting to a PC

26 - HDMI Connection or DVI to HDMI Connection

28Connecting to an Audio System

28- Digital Optical Audio Connection

29Connecting Headphones

30Connecting a USB Drive

31MAGIC REMOTE FUNCTIONS

32Registering Magic Remote

32 How to use Magic Remote

32Precautions to Take when Using the Magic Remote

33USING THE USER GUIDE

34SPECIFICATIONS

36EXTERNAL CONTROL DEVICE SETUP

37MAINTENANCE

37 Cleaning Your TV

37 - Screen, Frame, Cabinet and Stand

37 - Power Cord

37 TROUBLESHOOTING

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this

manual.

yyThe available menus and options may differ from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9

INSTALLATION PROCEDURE

1Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

4Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

*When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take up to one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.

NOTE

yyThe items supplied with your product may vary depending upon the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.

yyUse an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into your TV’s USB port.

<![if ! IE]>

<![endif]>ENGLISH

AA

*A 10 mm *B 18 mm

10 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Magic Remote,									Power Cord
					Owner’s Manual
Batteries (AA)									(Depending upon model)
(See p. 31)
(For 42/47/50/55/60LB6500,					(For 65LB650T, LB700T				(For 42LB6500, 42LB650T)
39/42/47/50/55/60LB650T)					series, 70LB720T)

Stand Base		Stand Base/Stand Body		Wall Mount Spacer
(See p. 15)		(See p. 15)		2 EA
				(See p. 19)

Cable Holder		Cable Management		Cinema 3D Glasses
(Depending upon model)		2 EA		The number of 3D glasses
(See p. 18)		(See p. 18)		may differ depending upon
				the model or country.

Tag On

Stand Screws		Tag On		Video Call Camera
4 EA, M4 x L14
		(Depending upon model)		(Depending upon model)
(See p. 16)

ASSEMBLING AND PREPARING 11

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices only work with certain models.

The model name or design may be changed manufacturer’s circumstances or policies.

AN-MR500		AG-F***		AN-VC5**
Magic Remote		Cinema 3D Glasses		Video Call Camera
AG-F***DP		LG Audio Device		Tag On
Dual Play Glasses
AN-WF500
Wi-Fi/Bluetooth DONGLE
(Depending upon model)

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Parts and Buttons

(For 42/47/50/55/60LB6500, 39/42/47/50/55/60LB650T)

Screen	NOTE

yyJoystick button is located below the screen of TV.

Joystick Button

			Remote Control sensor
Speakers
			Power Indicator

(For 65LB650T, LB700T series, 70LB720T)

Screen	NOTE

yyJoystick button is located below the screen of TV.

Joystick Button

Speakers			Remote Control sensor
			Power Indicator

NOTE

yyRemoving the protective film on the bottom of the TV (Depending upon model)

»»The protective film was applied to the TV face to protect it from scratches and other damage during shipping.

»»When the TV is installed, peel the film off the bottom of the cabinet.

ASSEMBLING AND PREPARING 13

Using the Joystick Button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume

Control

Channels

Control

NOTE

When the TV is turned off, place your finger on the joystick button and press it once and release it.

When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.

If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.

If you place your finger over the joystick button and move it up or down, you can scrolls through the saved channels you want.

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the Menu items (, , ) moving the joystick button left or right.

TV Off	Turn the power off.
close	Clears on-screen displays and returns to TV viewing.
Input	Changes the input source.

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen. yyDo not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to

the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in.

yyBefore moving or lifting the TV, disconnect the power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

<![if ! IE]>

<![endif]>ENGLISH

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yyUse at least two people to move a large TV.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen handling the TV, be careful not to damage the protruding joystick button. yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration. yyWhen transporting the TV, keep the TV

upright; never turn the TV on its side or tilt towards the left or right.

ASSEMBLING AND PREPARING 15

Setting Up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

1	(For 42/47/50/55/60LB6500,
	39/42/47/50/55/60LB650T)	2	A stand base

B stand base

<![if ! IE]>

<![endif]>ENGLISH

1

Stand Base

2

(For 65LB650T, LB700T series, 70LB720T)

1	Attach the stand to the TV using the upper
	mounting hole on the back of the TV.
2	Attach the stand to the TV using the lower
	connection on the back of the TV.

Stand Base/

Stand Body

16 ASSEMBLING AND PREPARING

3

4 EA

M4 x L14

<![if ! IE]>

<![endif]>ENGLISH

		ASSEMBLING AND PREPARING 17
Mounting on a Table		Securing the TV to a wall (optional)
1 Lift and tilt the TV into its upright position on		(Depending upon model)
a table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10	cm

2 Connect the power cord to a wall outlet.

CAUTION

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

1

2

Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

Mount the wall brackets with the bolts to

the wall.

Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable.

Make sure to keep the rope parallel to the flat surface.

CAUTION

yyMake sure that children do not climb on or hang on the TV.

NOTE

yyUse a platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

18 ASSEMBLING AND PREPARING

Tidying Cables

1Gather and bind the cables with the cable holder.

2Gather and bind the cables with the cable management.

(For LB6500 series, LB650T series, LB700T series)

Cable Holder	Cable
	Management
(For 70LB720T)

Cable Holder

Cable

Management

CAUTION

yyDo not move the TV by holding the cable holder and cable management, as the cable holders may break, and injuries and damage to the TV may occur.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG’s wall mount bracket, please use wall mount bracket which the distance to the wall is adequately secured for seamless connectivity to external devices.

10 cm

10 cm 10 cm

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model 39LB650T

VESA (A x B)	200 x 200
A
B
Standard screw	M6

Number of screws 4

Wall mount bracket MSW240 (optional) LSW240B

Model 42/47/50/55LB6500 42/47/50/55LB650T

VESA (A x B)	400 x 400
A
B
Standard screw	M6

Number of screws 4

Wall mount bracket MSW240 (optional) LSW440B

			ASSEMBLING AND PREPARING 19
	Model	60LB6500	CAUTION
		60/65LB650T	yyDisconnect the power first, and then
		42/47/55LB700T	move or install the TV. Otherwise electric
	VESA (A x B)	400 x 400	shock may occur.
			yyIf you install the TV on a ceiling or slanted
	A
	B		wall, it may fall and result in severe injury.
			Use an authorized LG wall mount and
	Standard screw	M6	contact the local dealer or qualified
			personnel.
	Number of screws	4
			yyDo not over tighten the screws as this
	Wall mount bracket	LSW440B	may cause damage to the TV and void
			your warranty.
	(optional)
			yyUse the screws and wall mounts that
			meet the VESA standard. Any damages
	Model	70LB720T	or injuries by misuse or using an improper
	VESA (A x B)	600 x 400	accessory are not covered by the
			warranty.
	A
	B
	Standard screw	M8	NOTE
	Number of screws	4	yyUse the screws that are listed on the VESA
			standard screw specifications.
	Wall mount bracket	LSW640B	yyThe wall mount kit includes an installation
	(optional)		manual and necessary parts.
			yyThe wall mount bracket is optional. You can
	Wall mount bracket (optional)		obtain additional accessories from your local
			dealer.
	LSW240B		yyThe length of screws may differ depending
			upon the wall mount. Make sure to use the
			proper length.
			yyFor more information, refer to the manual
	LSW440B		supplied with the wall mount.
			yyWhen attaching a wall mounting bracket to
			the TV, insert the wall mount inner spacers
			into the TV wall mount holes to adjust the
			vertical angle of the TV.
	MSW240		(For 42LB6500, 42LB650T)
			Wall Mount
	LSW640B		Spacers

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

20 MAKING CONNECTIONS

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device.

yyThe external device connections shown may differ slightly from illustrations in this manual. yyConnect external devices to the TV regardless of the order of the TV port.

yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device. yyRefer to the external equipment’s manual for operating instructions.

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional.

VHF Antenna

UHF Antenna

					Antenna	or
ANTENNA							CABLE		Wall Jack
IN			Coaxial (75Ω)
							IN	Coaxial (75Ω)

(*Not Provided)

(*Not Provided)

Terminal

CAUTION

yyMake sure not to bend the copper wire of the RF cable.

Copper wire

yyComplete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

yyTo improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

yyUse a signal splitter to use 2 TVs or more. yyIf the antenna is not installed properly,

contact your dealer for assistance. yyDTV Audio Supported Codec: MPEG,

Dolby digital, AAC, HE-AAC

MAKING CONNECTIONS 21

Connecting to a HD receiver, DVD Player, or VCR

Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.

HDMI Connection

HDMI is the best way to connect a device.

Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.

NOTE

yyUse the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

yyHDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192kHz ), DTS.

Choose any HDMI input port to connect.

It does not matter which port you use.

<![if ! IE]>

<![endif]>IN 3(MHL)

(*Not Provided)

<![if ! IE]>

<![endif]>IN2

DVD / Blu-Ray / HD Cable Box / HD STB

<![if ! IE]>

<![endif]>IN1(ARC)

ARC (Audio Return Channel)

yyWhen connected with a high-speed HDMI cable, digital audio can be sent to a compactible device without an additional optical audio cable.

yyARC is only supported on the HDMI IN1(ARC) port. An external audio device that supports ARC should be connected to HDMI IN1(ARC) if you wish to use ARC.

<![if ! IE]>

<![endif]>ENGLISH

22 MAKING CONNECTIONS

DVI to HDMI Connection

Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.

NOTE

yyWhen using the HDMI/DVI cable, Single link is only supported.

Choose any HDMI input port to connect.

It does not matter which port you use.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>IN 1(ARC) IN 2 IN 3(MHL)

<![if ! IE]>

<![endif]>COMPONENT IN /AV IN

VIDEO/	Y		P	B

P R

<![if ! IE]> <![endif]>WHITE			<![if ! IE]> <![endif]>RED

(*Not Provided)

(*Not Provided)

DVI OUT

AUDIO OUT

DVD / Blu-Ray / HD Cable Box

MAKING CONNECTIONS 23

Connecting to a mobile phone

Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets.

NOTE

yyConnect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. yyThis only works for the MHL-enabled phone.

yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone. yyAn MHL passive cable is needed to connect the TV and a mobile phone.

yyRemove the MHL cable from the TV when:

-the MHL function is disabled.

-your mobile device is fully charged in standby mode.

<![if ! IE]>

<![endif]>IN 3(MHL)

MHL Cable

(*Not Provided)

Mobile phone

<![if ! IE]>

<![endif]>ENGLISH

24 MAKING CONNECTIONS

Component Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration.

NOTE

yyIf cables are installed incorrectly, it could cause the image to display in black and white or with distorted color.

yyCheck to ensure the cables are matched with the corresponding color connection.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>COMPONENT IN /AV IN

VIDEO/ Y

<![if ! IE]>

<![endif]>GREEN

P B P R L/MONO AUDIO R

		PC-AUDIO IN
<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED

<![if ! IE]> <![endif]>Provided) (*Not			<![if ! IE]> <![endif]>Provided) (*Not
<![if ! IE]> <![endif]>GREEN	<![if ! IE]> <![endif]>BLUE	<![if ! IE]> <![endif]>RED	<![if ! IE]> <![endif]>WHITE	<![if ! IE]> <![endif]>RED
		L		R
VIDEO			AUDIO

DVD / Blu-Ray / HD Cable Box