LG 55LB6700, 42LB6700, 50LB650T, 42LB6310, 50LB6500 Owner’s Manual

OWNER’S MANUAL

LED TV

* Disclaimer

LG LED TV applies LCD

screen with LED backlights.

Click! User Guide

Please read this manual carefully before operating your set and retain it for future reference.

LB63** LB65** LB67** LB69**

LB72** LB75** LB87**

*MFL68027102*

www.lg.com

P/NO : MFL68027102 (1404-REV02)

Printed in Korea

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

ENG

3 LICENSES

3 OPEN SOURCE SOFTWARE

NOTICE

3 EXTERNAL CONTROL DEVICE

SETUP

4 SAFETy INSTRUCTIONS

10 Viewing 3D Imaging (Only 3D models)

11 INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking 15 Separate purchase 16 Parts and buttons 18 - Using the Joystick button 19 Lifting and moving the TV 20 Setting up the TV 20 - Attaching the stand 24 - Attaching the Sound Bar Supporter 25 Mounting on a table 27 Mounting on a wall 29 Tidying cables 30 Using Built-in Camera 31 - Preparing Built-in Camera 31 - Name of Parts of Built-in Camera 31 - Checking the Camera’s Shooting

Range

32 MAKING CONNECTIONS

32 Antenna connection 33 Satellite dish connection 33 Headphone connection 34 HDMI connection 35 DVI to HDMI connection 36 Component connection 37 Composite connection 38 Audio connection 38 - Digital optical audio connection 38 USB connection 39 Euro Scart connection 40 MHL connection

41 REMOTE CONTROL

42 MAGIC REMOTE FUNCTIONS

43 Registering Magic Remote 43 How to use Magic Remote 44 Precautions to Take when Using the

Magic Remote

44 USING THE USER GUIDE

45 MAINTENANCE

45 Cleaning your TV 45 - Screen, frame, cabinet and stand 45 - Power cord

45 TROUBLESHOOTING

46 ENVIRONMENTAL INFORMATION

46 WEEE

47 SPECIFICATIONS

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product may be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

ENGENGLISH

To obtain the external control device setup information, please visit www.lg.com.

SAFETY INSTRUCTIONS

ENGLISH

SAFETY INSTRUCTIONS

ENG

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and/or remote control

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

Do not place the product where it might be

exposed to dust. This may cause a fire hazard.

Mains Plug is the TV connecting/

disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

Make sure to connect Mains cable to

compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

Insert power cable plug completely into wall

socket otherwise if not secured completely into socket, fire ignition may break out.

Ensure the power cord does not come into

contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.

Do not place a heavy object, or the product

itself, on power cables. Otherwise, this may result in fire or electric shock.

Do not touch the power plug with wet

hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.

Bend antenna cable between inside and

outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.

SAFETY INSTRUCTIONS

Desiccant

When mounting TV onto wall make sure to

neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

Do not plug too many electrical devices into

a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

Do not drop the product or let it fall over

when connecting external devices. Otherwise, this may result in injury or damage to the product.

Keep the anti-moisture packing material or

vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Dispose of used batteries carefully to

ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries.

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)

Do not put or store inflammable substances

near the product. There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

Do not drop metallic objects such as

coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

ENGENGLISH

Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over, which may cause serious injury.

Do not spray water on the product or scrub

with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

SAFETY INSTRUCTIONS

ENGLISH

ENG

Do not allow any impact, shock or any

objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged.

Never touch this product or antenna during

a thunder or lighting storm. You may be electrocuted.

Never touch the wall outlet when there is

leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark.

Do not disassemble, repair or modify the

product at your own discretion. Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

If any of the following occur, unplug the

product immediately and contact your local service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

Unplug the TV from AC mains wall socket

if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.

Apparatus shall not be exposed to dripping

or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not install this product on a wall if it

could be exposed to oil or oil mist. This may damage the product and causeit to fall.

CAUTION

Install the product where no radio wave

occurs.

There should be enough distance between

an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock.

Do not install the product on places such

as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

SAFETY INSTRUCTIONS

If you install the TV on a stand, you need

to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

If you intend to mount the product to a wall,

attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Only use the attachments / accessories

specified by the manufacturer.

When installing the antenna, consult with a

qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.

We recommend that you maintain a

distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.

Do not place non-rechargeable batteries in

charging device.

Make sure there are no objects between the

remote control and its sensor.

Signal from Remote Control can be

interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.

When connecting external devices such

as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Do not turn the product On/Off by plugging-

in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.

ENGENGLISH

Only use the specified type of battery.

This could cause damage to the remote control.

Do not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

Batteries should not be exposed to

excessive heat. For example, keep away from direct Sunlight, open fireplace and electric heaters.

Please follow the installation instructions

below to prevent the product from overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

SAFETY INSTRUCTIONS

ENGLISH

ENG

Take care not to touch the ventilation

openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

Periodically examine the cord of your

appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Prevent dust collecting on the power plug

pins or outlet. This may cause a fire hazard.

Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

When cleaning the product and its

components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. When unplugging the cable, grab the plug

and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

Do not press strongly upon the panel with

a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

Avoid touching the screen or holding your

finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

When moving the product, make sure

you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

When moving or unpacking the product,

work in pairs because the product is heavy. Otherwise, this may result in injury.

SAFETY INSTRUCTIONS

Contact the service centre once a year to

clean the internal parts of the product. Accumulated dust can cause mechanical failure.

Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

If the product feels cold to the touch, there

may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

You may find different brightness and colour

of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

Displaying a still image (e.g., broadcasting

channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

ENGENGLISH

The panel is a high technology display

product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product. This generated sound does not affect the performance and reliability of the product.

SAFETY INSTRUCTIONS

Viewing 3D Imaging

ENGLISH

ENG

(Only 3D models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive

seizure or chronic illness

ySome users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

yDo not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

y3D Contents are not recommended to those

who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yIf your eyesight varies between your right

and left eye, revise your eyesight prior to

watching 3D contents.

Symptoms which require discontinuation or

refraining from watching 3D contents

yDo not watch 3D contents when you feel

fatigue from lack of sleep, overwork or drinking.

yWhen these symptoms are experienced,

stop using/watching 3D contents and get enough rest until the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

CAUTION

Viewing Environment

Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yInfants/Children

- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yTeenagers

- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yElderly

- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos properly.

Do not use 3D glasses instead of your normal

glasses, sunglasses or protective goggles.

Using modied 3D glasses may cause eye

strain or image distortion.

Do not keep your 3D glasses in extremely high

or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy to be

scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV. yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yThe available menus and options may differ from the input source or product model that you

are using. yNew features may be added to this TV in the future. yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption. yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV

may take up to one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

ENGENGLISH

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.

yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model. yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions. yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

10 mm

18 mm

ENGLISH

ENG

ENERGY

ASSEMBLING AND PREPARING

AV MODE

INPUT

SAVING

1 2 3

4 5 6

7 809

FLASHBK

LIST

MARK

FAV

P A G

CHVOL

MUTE

INFO

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

Remote Control, Batteries (AAA)

The remote control will not be included for all sales market. (Depending on model)

Magic Remote, Batteries (AA)

(Only LB63**, LB65**, LB67**, LB69**, LB72**, LB75**, LB87**) (See p.42)

(See p.41)

Tag On

Tag on Cinema 3D Glasses

The number of 3D glasses may differ depending on the model or country. (Only LB65**, LB67**, LB69**, LB72**, LB75**, LB87**)

Owner’s Manual

Wall Mount Spacers

2EA (Only 42LB63**, 42LB65**) (See p.28)

Component Gender Cable

(Only LB87**) (See p.36)

Composite Gender Cable

(Only LB87**) (See p.36, 37)

Power Cord

ASSEMBLING AND PREPARING

ENGENGLISH

Cable Holder

(Depending on model) (See p.29, 30)

Stand Screws

4EA, M4 x L20 (Only 32LB65**) (See p.20, 21)

Cable Managements

2EA (Only LB63**, LB65**,

LB67**, LB69**, LB72**)

(See p.29)

Stand Screws

4EA, M4 x L14 (Only LB63**,

39/42/47/50/55/60/70LB65**, LB67**, LB69**, LB72**,

LB75**) 8EA, M4 x L14 (Only LB87**) (See p.20, 21, 22, 23, 24)

Cable Managements

2EA (Only LB75**) (See p.29)

Stand Screws

4EA, M4 x L10 (Only LB75**) (See p.21)

Stand Bases (Only LB65**-TH) (See p.21)

Stand Bases

(Only LB63**, 32/39/42/47/50/55/60LB65**

-TA/TB)

(See p.20)

Stand Assys (Stand Body/Stand Base)

(Only 70LB65**-TA, LB67**,

LB69**, LB72**)

(See p.20)

ENGLISH

ENG

ASSEMBLING AND PREPARING

Stand Front

(Only LB75**) (See p.21)

Stand Assys

(Only LB87**) (See p.22)

Stand Supporters

(Only LB75**) (See p.21)

Sound Bar Supporters

(Only LB87**) (See p.24)

Sound Bar

(Only LB87**) (See p.22, 24)

Screw Covers

(Only LB87**) (See p.23, 24)

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.

AG-F***DP

Dual Play Glasses

Tag on AN-VC5**

Compatibility

AG-F***DP

Dual Play Glasses

AG-F***

Cinema 3D Glasses

AN-MR500

Magic Remote

Tag on

AN-VC5**

Video Call Camera

LG Audio Device

AG-F***

Cinema 3D Glasses

Video Call Camera

LB65**, LB67**,

LB63**

• • •

• •

• • •

LB69**, LB72**, LB75**

AN-MR500

Magic Remote

LG Audio Device

• •

LB87**

ENGENGLISH

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

ENG

A type : LB63**, LB65**-TA/TB

Screen

B type : LB65**-TH

Screen

Speakers

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

C type : LB67**, LB69**, LB72**

Remote control and

Screen

Speakers

Intelligent1 sensors

Power Indicator

Speakers

Joystick Button

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

D type : LB75**

Screen

Speakers

ASSEMBLING AND PREPARING

E type : LB87**

Screen

Speakers

ENGENGLISH

Built-in Camera

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

Remote control and

Intelligent1 sensors

Joystick Button

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick Button - This button is located below the TV screen.

NOTE

yYou can set the LG Logo light or Power indicator Light to on or off by selecting General in the

main menus. (Depending on model)

LG Logo light

ASSEMBLING AND PREPARING

Using the Joystick button

ENGLISH

ENG

You can simply operate the TV functions by pressing to turn On/Off or sliding your finger over joystick button moving up, down, left or right.

Basic Functions

Power On

Power Off

Volume Control

Programmes

Control

When the TV is turned off, place your finger on the joystick button and press it once and release it.

When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.

If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.

If you place your finger over the joystick button and move it up or down, you can scrolls through the saved programmes you want.

NOTE

yWhen your finger is over the joystick button and you are sliding finger forward/back, left or right,

be careful not to press down to hard on joystick. If you press down hard on joystick button first

then the adjustment of volume level and programme scroll action will not operate.

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can adjust the Menu items( , , ) moving the joystick button left or right.

TV OFF Turns the power off.

INPUT Changes the input source.

Closes Clears on-screen displays and returns to TV viewing.

ASSEMBLING AND PREPARING

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the

box or packing material that the TV originally came in.

yBefore moving or lifting the TV, disconnect

the power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yWhen transporting a large TV, there should

be at least 2 people.

yWhen transporting the TV by hand, hold the

TV as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV

upright, never turn the TV on its side or tilt towards the left or right.

yDo not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

yWhen handling the TV, be careful not to

damage the protruding joystick button.

ENGENGLISH

yHold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

Setting up the TV

ENGLISH

ENG

Image shown may differ from your TV.

Attaching the stand

LB63**, 32/39/42/47/50/55/60LB65**-TA/TB

A stand base

B stand base

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

70LB65**-TA, LB67**, LB69**, LB72**

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

Stand Body

Stand Base

A stand base

B stand base

M4 x L14

M4 x L20 (Only 32LB65**)

4EA

M4 x L14

4EA

ASSEMBLING AND PREPARING

LB65**-TH

A stand base

B stand base

1 Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2 Attach the stand to the TV using the lower

connection on the back of the TV.

LB75**

B Stand Supporter

ENGENGLISH

Stand Front

A Stand

Supporter

M4 x L10

4EA

M4 x L14

M4 x L20 (Only 32LB65**)

4EA

+ 47 hidden pages