LG 55LB5830, 47LB5830 Owner's Manual [es]

OWNER’S MANUAL

LED TV*

*LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your set and retain it
for future reference.

32LB583B 42LB5830

47LB5830
50LB5830
55LB5830
60LB5830
65LB5830

*MFL68027954*

www.lg.com

P/NO : MFL68027954 (1408-REV01)

2

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.

Read these instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to

alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

ENGLISH

ENG

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the
literature accompanying the appliance.

Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

y

Clean only with a dry cloth.

y

Do not block any ventilation openings. Install in

y

accordance with the manufacturer’s instructions.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be
seriously injured or there is a possibility of accident
or death.

CAUTION

If you ignore the caution message, you may be
slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

Do not install near any heat sources such

y

as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized

y

or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ by
country).

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

3

Do not press strongly upon the panel with a hand

y

or a sharp object such as a nail, pencil or pen, or
make a scratch on it.

Protect the power cord from being walked on

y

or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by

y

the manufacturer.

Use only with a cart, stand, tripod, bracket, or

y

table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

Keep the packing anti-moisture material or vinyl

y

packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed
by mistake, force the patient to vomit and visit
the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach of
children.
CAUTION concerning the Power Cord

y

(Can differ by country):
Check the specification page of this owner’s
manual to be certain. Do not connect too many
appliances to the same AC power outlet as
this could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized service. Protect the power
cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord
exits the appliance. Do not move the TV with the
power cord plugged in. Do not use a damaged
or loose power cord. Be sure do grasp the plug
when unplugging the power cord. Do not pull on
the power cord to unplug the TV.

ENGENGLISH

Unplug this apparatus during lightning storms or

y

when unused for long periods of time.

Refer all servicing to qualified service personnel.

y

Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

Do not stick metal objects or any other conductive

y

material into the power cord. Do not touch the
end of the power cord while it is plugged in.

- To reduce the risk of fire or electrical

Warning

y

shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles, or
expose the TV to direct air conditioning.

4

IMPORTANT SAFETY INSTRUCTIONS

y

y

y

ENGLISH

ENG

y

y

Do not expose to dripping or splashing and do
not place objects filled with liquids, such as
vases, cups, etc. on or over the apparatus (e.g. on
shelves above the unit).

Grounding

(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire to
prevent possible electric shock (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do
not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power Supply

As long as this unit is connected to the AC wall
outlet, it is not disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product.

Outdoor Antenna Grounding

(Can differ by country):
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can come in contact with
such power lines or circuits as death or serious
injury can occur. Be sure the antenna system
is grounded to provide some protection against
voltage surges and built-up static charges. Section
810 of the National Electrical Code (NEC) in the
U.S.A. provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes and requirements for the
grounding electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Electric Service

Equipment

Ground Clamp

Cleaning

y

NEC: National Electrical Code

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)

When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the TV
as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzine.

Moving

y

Make sure the product is turned off, unplugged,
and all cables have been removed. It may take 2
or more people to carry larger TVs. Do not press
or put stress on the front panel of the TV.

Ventilation

y

Install your TV where there is proper ventilation. Do
not install in a confined space such as a bookcase.
Do not cover the product with cloth or other
materials while plugged. Do not install in excessively
dusty places.
If you smell smoke or other odors coming from

y

the TV, unplug the power cord and contact an
authorized service center.
Keep the product away from direct sunlight.

y

Never touch this apparatus or antenna during a

y

thunder or lightning storm.
When mounting a TV on the wall, make sure not

y

to install the TV by hanging the power and signal
cables on the back of the TV.
Do not allow an impact shock or any objects to fall

y

into the product, and do not drop anything onto
the screen.

DISCONNECTING THE DEVICE FROM THE MAIN

y

POWER

The Power Plug is the disconnecting device. In
case of an emergency, the Power Plug must
remain readily accessible

Batteries

y

Store the accessories (battery, etc.) in a safe
location out of the reach of children.
This apparatus use batteries. In your community

y

there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact
your local authorities for disposal or recycling
information.
Do not dispose of batteries in a fire.

y

Do not short circuit, disassemble, or allow the

y

batteries to overheat.

Dot Defect

y

The Plasma or LCD panel is a high technology product
with resolution of two million to six million pixels. In a
very few cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots are deactivated
pixels and do not affect the performance and reliability
of the TV.

Generated Sound

y

Cracking noise

watching or turning off the TV is generated by plastic
thermal contraction due to temperature and humidity.
This noise is common for products where thermal
deformation is required.

Electrical circuit humming/panel buzzing

noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a
product. It varies depending upon the product.
This generated sound does not affect the performance
and reliability of the product.
Take care not to touch the ventilation openings. When

y

watching the TV for a long period, the ventilation
openings may become hot. This does not affect the
performance of the product or cause defects in the
product.
Do not install this product on a wall if it could be

y

exposed to oil or oil mist. This may damage the product
and cause it to fall.
If the TV feels cold to the touch, there may be a small

y

flicker when it is turned on. This is normal, there is
nothing wrong with TV. Some minute dot defects may
be visible on the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse effect on
the TV’s performance. Avoid touching the LCD screen
or holding your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion
effects on the screen.

A cracking noise that occurs when

A low level

Preventing Image burn or Burn-in on
your TV screen

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the
equipment and the receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.

5

ENGENGLISH

If a fixed image displays on the TV screen for

y

a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a

y

long period of time, image burn may occur on the
letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen

y

for a long period of time (2 or more hours for LCD,
1 or more hours for the Plasma TV) to prevent
image burn.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected
to the grounding system of the building, as close
to the point of the cable entry as practical.

6

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model.
For more information about licenses, visit

www.lg.com

.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in

ENGLISH

this product, please visit

ENG

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to

[e-mail]

the product.

http://opensource.lge.com

. This offer is valid for three (3) years from the date on which you purchased

.

NOTE

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are

y

using.
New features may be added to this TV in the future.

y

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

7

Remote Control,
Batteries (AAA)

(For 32LB583B)

Stand Screws

4 EA, M4 x L20
(For 32LB583B,

42/47/50/55/60LB5830) (For 65LB5830)

Stand Base Stand Base

Owner’s Manual

(For
42/47/50/55/60/65LB5830) (For 42LB5830)

Stand Screws

4 EA, M4 x L14

Power Cord Cable Holder

Wall Mount Spacer

2 EA

Stand Holder

2 EA

ENGENGLISH

8

ASSEMBLING AND PREPARING

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

Some models appear to have a thin film on the screen. It is actually part of the screen; do not

y

remove it.

NOTE

The items supplied with your product may vary depending upon the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

(0.39 inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not

y

fit into your TV’s USB port.

B

A

ENGLISH

ENG

B

A

*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items. These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.

AN-MR500

Magic Remote

AN-WF500

Wi-Fi/Bluetooth DONGLE

AN-VC5**

Video Call Camera

LG Audio Device

Parts and buttons

Screen

Speakers

ASSEMBLING AND PREPARING

9

Remote Control Sensor and

1

Intelligent sensor - Adjusts the image quality and brightness based on the surrounding

environment.

2

Joystick button is located below the screen of TV.

Intelligent Sensor

Power Indicator

1

Joystick button

2

NOTE

You can set the Power indicator Light to on or off by selecting

y

(Depending upon model)

in the main menus.

OPTION

ENGENGLISH

10

ASSEMBLING AND PREPARING

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume Control

Channels Control

When the TV is turned off, place your finger on the joystick button and
press it once and release it.

When the TV is turned on, place your finger on the joystick button and
press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and holding the
joystick button will let you exit the Menu.)

If you place your finger over the joystick button and move it left or right,
you can adjust the volume level you want.

If you place your finger over the joystick button and move it up or down,
you can scroll through the saved channels you want.

NOTE

When your finger over the joystick button and push it to the up, down, left, or right, be careful

y

not to press the joystick button. If you press the joystick button first, you may not be able to
adjust the volume level and/or scroll through saved channels.

ENGLISH

ENG

Adjusting the menu

When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left or right.

TV off

Settings

Close

Input List

Turns the power off.

Accesses the main menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Lifting and moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.
Do not place the product on the floor with

y

its front facing down without padding.
Failure to do so may result in damage to
the screen.

It is recommended to move the TV in the

y

box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect

y

the power cord and all cables.
When holding the TV, the screen should

y

face away from you to avoid damage.

Hold the top and bottom of the TV frame

y

firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

ASSEMBLING AND PREPARING

Use at least two people to move a large TV.

y

When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

When handling the TV, be careful not to

y

damage the protruding joystick button.
When transporting the TV, do not expose

y

the TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright; never turn the TV on its side or tilt
towards the left or right.

11

ENGENGLISH

12

ASSEMBLING AND PREPARING

Setting up the TV

You can mount your TV to a wall or attach
the stand if you wish to place the TV on an
entertainment center or other furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

CAUTION

When attaching the stand to the TV

y

set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

1

(For 65LB5830)

ENGLISH

ENG

Stand Base

(For 42/47/50/55/

60LB5830, 32LB583B)

Stand Base

2

(For 32LB583B)

4 EA
M4 x L20

(For 42/47/50/55/60/
65LB5830)

4 EA
M4 x L14

Mounting on a table

Lift and tilt the TV into its upright position on

1

a table.

- Leave a 10 cm (4 inch) (minimum) space
from the wall for proper ventilation.

1

B stand base

2

A stand base

10 cm

(4 inches)

10 cm

Connect the power cord to a wall outlet.

2

10 cm

10 cm

CAUTION

Do not place the TV near or on sources

y

of heat, as this may result in fire or other
damage.

ASSEMBLING AND PREPARING

13

Securing the TV to a wall (optional)

(Depending upon model)

Insert and tighten the eye-bolts, or TV

1

brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

Mount the wall brackets with the bolts to the

2

wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

Mounting on a wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the
wall mount bracket on a solid wall perpendicular
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the wall mount. Detailed
instructions will be included with the wall mount.
We recommend that you use an LG brand wall
mount. When you do not use LG’s wall mount
bracket, please use a wall mount bracket where
the device is adequately secured to the wall with
enough space to allow connectivity to external
devices.

10 cm

(4 inches)

10 cm

10 cm

10 cm

ENGENGLISH

Connect the eye-bolts and wall brackets

3

tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.

CAUTION

Make sure that children do not climb on

y

or hang on the TV.

NOTE

Use a platform or cabinet that is strong

y

and large enough to support the TV
securely.
Brackets, bolts and ropes are optional.

y

You can obtain additional accessories
from your local dealer.

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.

Model 32LB583B 42LB5830

VESA (A x B)

A

B

Standard screw M6 M6
Number of screws 4 4
Wall mount

bracket (optional)

200 x 200 400 x 400

LSW240B
MSW240

47LB5830
50LB5830
55LB5830

LSW440B
MSW240

14

ASSEMBLING AND PREPARING

Model 60LB5830, 65LB5830
VESA (A x B)

A

B

Standard screw M6
Number of screws 4
Wall mount

bracket (optional)

400 x 400

LSW440B

CAUTION

Disconnect the power first, and then

y

move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted

y

wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this

y

may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that

y

ENGLISH

ENG

meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications.
The wall mount kit includes an installation

y

manual and necessary parts.
The wall mount bracket is optional. You can

y

obtain additional accessories from your local
dealer.
The length of screws may differ depending

y

upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual

y

supplied with the wall mount.
When attaching a wall mounting bracket to

y

the TV, insert the wall mount inner spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
(For 42LB5830)

Wall Mount
Spacer

MAKING CONNECTIONS

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device’s connection, refer to the manual provided with
each device.

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal

y

input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.

y

Connect external devices to the TV regardless of the order of the TV port.

y

If you connect a gaming device to the TV, use the cable supplied with the gaming device.

y

Refer to the external equipment’s manual for operating instructions.

y

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items. And a RF cable is optional.

VHF Antenna
UHF Antenna

15

ENGENGLISH

ANTENNA/
CABLE IN

Coaxial (75Ω)

(*Not Provided)

CAUTION

Make sure not to bend the copper wire of

y

the RF cable.

Copper wire

Complete all connections between

y

devices, and then connect the power cord
to the power outlet to prevent damage to
your TV.

Antenna

Terminal

NOTE

Use a signal splitter to use 2 TVs or more.

y

DTV Audio Supported Codec: MPEG,

y

Dolby Digital.

16

O

/Y

MAKING CONNECTIONS

Other connections

Image shown may differ from your TV.

y

Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Depending upon the model, a cable may not be
provided.

Digital Audio

System

SERVICE

LAN

ONLY

ENGLISH

ENG

VIDE

P

B

R

P

L/MONO

AUDIO R

ANTENNA/

CABLE IN

/AV IN

RED

PC-AUDIO IN

WHITE

RED

YELLOW

WHITE

COMPONENT IN

GREEN

BLUE

OPTICAL AUDIO IN

RED RED

GREEN

BLUE

PB PRY RL

VIDEO AUDIO

RED

WHITE

RED

VIDEO

YELLOW

WHITE

( )

MONO

AUDIOL R

VCR / DVD / Blu-Ray / HD Cable Box

MAKING CONNECTIONS

USB IN 3

17

USB

PC

HDMI

USB IN 2

USB IN 1

(MHL)

3

IN

2

IN

(ARC)

1

IN

MHL Cable

HD Cable Box / DVD /

USB HUB

Mobile phone

HDMI

Blu-Ray / HD STB

ENGENGLISH

18

REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label
inside the compartment, and close the battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or
ambient pollution.To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

y

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.

ENGLISH

ENG

SMART

MY APPS

(POWER)

Returns to the last TV channel.

TV
CAPTION
AV MODE

RATIO

INPUT

Number button

- (Dash)
LIST
FLASHBK

repeatedly).

VOL
FAV
INFO
MUTE

CH
PAGE

Opens the SIMPLINK menu.

SMART

MY APPS
SETTINGS
Q.MENU
Navigation buttons
OK

BACK

EXIT
SLEEP

VD /

be enabled by pressing the VD key.

Control buttons ( , , , , )

(USB,SIMPLINK).

Color buttons

( : Red, : Green, : Yellow, : Blue)

Turns the TV on or off.

Activates or deactivates the subtitles.

Selects an AV mode.

Resizes an image.

Changes the input source. Turns the TV on if it is off.

Enters numbers.

Inserts a dash between numbers such as 2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last channels selected (pressing

Adjusts the volume level.

Accesses your favorite channel list.

Shows information on the current program.

Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next screen.

Accesses the AV devices connected to the TV;

Accesses the Home menu.

Shows the list of Apps.

Accesses the main menu.

Accesses the quick menu.

Selects menus or options and confirms your input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV viewing.

Sets the length of time until the TV to turns off.
Enables VD function. SAP(Secondary Audio Program) Feature can also

Scrolls through menus or options. (up/down/left/right)

Controls the SIMPLINK compatible devices

These access special functions in some menus.

USING THE USER
GUIDE

User Guide allows you to easily access detailed
TV information.

USING THE USER GUIDE

19

Press

1

menu.

Select

2

Select

3

SMART

SETTINGS

User Guide

SUPPORT

Sound Test

Product/Service Info.
Patent Information
LG Remote TV Service
Initialization of App
Legal Documents
User Guide

button to access the Home

SUPPORT

and press the

OK

.

button

.

ENGENGLISH

20

SPECIFICATIONS

SPECIFICATIONS

Product specifications may be changed without prior notice due to upgrade of product functions.

Power requirement
Television System
Program Coverage
External Antenna Impedance

Operating Temperature 0 - 40 °C (32 °F ~ 104 °F)

Environment
condition

Dimensions
(W x H x D)

ENGLISH

ENG

Weight

Current Value / Power consumption 1.25 A / 75 W

Dimensions
(W x H x D)

Weight

Current Value / Power consumption 1.1 A / 110 W 1.2 A / 120 W

Operating Humidity Less than 80 %
Storage Temperature
Storage Humidity Less than 85 %

MODELS

With stand

Without stand

With stand 6.2 kg (13.6 Ibs)
Without stand 6.0 kg (13.2 Ibs)

MODELS

With stand

Without stand

With stand 9.5 kg (20.9 Ibs) 12.7 kg (27.9 Ibs)
Without stand 9.2 kg (20.2 Ibs) 12.3 kg (27.1 Ibs)

AC 100 - 240 V ~ 50 / 60 Hz
ATSC / NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
75

Ω

-20 - 60 °C (- 4 °F ~ 140 °F)

32LB583B

(32LB583B-UV)

732 x 481 x 207 (mm)

28.8 x 18.9 x 8.1 (inch)
732 x 437 x 55.5 (mm)

28.8 x 17.2 x 2.1 (inch)

42LB5830

(42LB5830-UV)

961 x 612 x 218 (mm)

37.8 x 24 x 8.5 (inch) 42.2 x 26.6 x 9.7 (inch)

961 x 567 x 55.5 (mm) 1,073 x 629 x 55.8 (mm)

37.8 x 22.3 x 2.1 (inch) 42.2 x 24.7 x 2.1 (inch)

1,073 x 676 x 247 (mm)

47LB5830

(47LB5830-UV)

SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP

21

MODELS

Dimensions
(W x H x D)

Weight

Current Value / Power consumption 1.3 A / 130 W 1.4 A / 140 W

Dimensions
(W x H x D)

Weight

Current Value / Power consumption 1.5 A / 150 W 1.9 A / 190 W

Frequency Range

Output Power (Max.)

Because band channel used by the country could be different, the user can not change or

y

With stand

Without stand

With stand 14.2 kg (31.3 Ibs)
Without stand 13.8 kg (30.4 Ibs) 17.3 kg (38.1 Ibs)

MODELS

With stand

Without stand

With stand 23.5 kg (51.8 Ibs) 30.5 kg (67.2 Ibs)
Without stand 23.0 kg (50.7 Ibs) 29 kg (63.9 Ibs)

Wireless LAN module (WN8122E1) specification

Standard

IEEE802.11a/b/g/n
2400 to 2483.5 MHz

5150 to 5250 MHz
5725 to 5850 MHz

802.11a : 16.5 dBm

802.11b : 16 dBm

802.11g : 15.5 dBm

802.11n - 2.4GHz : 15.5 dBm

802.11n - 5GHz: 16.5 dBm

50LB5830

(50LB5830-UV)

1,128 x 709 x 247 (mm) 1,243 x 772 x 247 (mm)

44.4 x 27.9 x 9.7 (inch) 48.9 x 30.3 x 9.7 (inch)

1,128 x 660 x 55.8 (mm) 1,243 x 725 x 56.8 (mm)

44.4 x 25.9 x 2.1 (inch)

60LB5830

(60LB5830-UV)

1,373 x 851 x 283 (mm) 1,462 x 898 x 314 (mm)

54 x 33.5 x 11.1 (inch) 57.5 x 35.3 x 12.3 (inch)

1,373 x 801 x 58.8 (mm) 1,462 x 850 x 59.2 (mm)

54 x 31.5 x 2.3 (inch) 57.5 x 33.4 x 2.3 (inch)

55LB5830

(55LB5830-UV)

48.9 x 28.5 x 2.2 (inch)

17.7 kg (39.0 Ibs)

65LB5830

(65LB5830-UD)

adjust the operating frequency and this product is set for the regional frequency table.
This device should be installed and operated with minimum distance 20 cm (7.8 inch) between

y

the device and your body. And this phrase is for the general statement for consideration of
user environment.
Contains FCC ID: BEJWN8122E1 / Contains IC: 2703H-WN8122E1

y

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit

www.lg.com

.

22

MAINTENANCE / TROUBLESHOOTING

MAINTENANCE

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product lifespan.

CAUTION

Make sure to turn the power off and disconnect the power cord and all other cables first.

y

When the TV is left unattended or unused for a long time, disconnect the power cord from the

y

wall outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

CAUTION

Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in

y

scratches on the screen and image distortions.

ENGLISH

Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air

y

ENG

fresheners, lubricants, as these may damage the screen’s finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,

y

or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Problem Solution

Check the remote control sensor on the product and try again.

Cannot control the TV
with the remote control.

No image display and no
sound is produced.

The TV turns off
suddenly.

y

Check if there is any obstacle between the product and the remote control.

y

Check if the batteries are still working and properly installed ( to , to ).

y

Check if the product is turned on.

y

Check if the power cord is connected to a wall outlet.

y

Check if there is a problem in the wall outlet by connecting other products.

y

Check the power control settings. The power supply may be interrupted.

y

Check if the

y

If there is no signal while the TV is on, the TV will turn off automatically after 15

y

minutes of inactivity.

Sleep Timer/Off Time

is activated in the

TIME

settings.