LG 55LA6910, 42LA6620, 55LA690T, 32LN560B, 60LA7400 Manual book

OWNER’S MANUAL

LED TV

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LA62** LA66** LA71** LN56** LN61**

P/NO : MFL67706422 (1306-REV05) Printed in Korea

LA64** LA69** LA74** LN57**

www.lg.com

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

ENG

3 SAFETY INSTRUCTIONS

8 Viewing 3D Imaging

(Only 3D models)

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking 13 Separate purchase 14 Parts and buttons 16 Lifting and moving the TV 17 Setting up the TV 17 - Attaching the stand 20 Mounting on a table 22 Mounting on a wall 24 Tidying cables

25 MAKING CONNECTIONS

25 Antenna connection 26 HDMI connection 26 Headphone connection 27 DVI to HDMI connection 27 Component connection 28 Composite connection 28 Audio connection 28 - Digital optical audio connection 29 USB connection 29 MHL connection

36 MAINTENANCE

36 Cleaning your TV 36 - Screen, frame, cabinet and stand 36 - Power cord

36 TROUBLESHOOTING

37 ENVIRONMENTAL INFORMATION

37 WEEE

38 SPECIFICATIONS

49 LICENSES

49 OPEN SOURCE SOFTWARE

NOTICE

49 EXTERNAL CONTROL DEVICE

SETUP

30 REMOTE CONTROL

33 MAGIC REMOTE CONTROL

FUNCTIONS

34 Registering Magic Remote Control 34 How to use Magic Remote Control 34 Precautions to Take when Using the

Magic Remote Control

35 USING THE USER GUIDE

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product may be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note carefully before using the product.

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and/or remote control

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

Do not place the product where it might

be exposed to dust. This may cause a fire hazard.

Mains Plug is the TV connecting/

disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

Insert power cable plug completely into

wall socket otherwise if not secured completely into socket, fire ignition may break out.

Ensure the power cord does not come into

contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.

Do not place a heavy object, or the

product itself, on power cables. Otherwise, this may result in fire or electric shock.

Bend antenna cable between inside and

outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock.

ENGENGLISH

Do not touch the power plug with wet

hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.

Make sure to connect Mains cable to

compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

When mounting TV onto wall make sure

to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock /fire hazard.

Do not plug too many electrical devices

into a single multiple electrical outlet. Otherwise, this may result in fire due to over-heating.

Desiccant

SAFETY INSTRUCTIONS

ENGLISH

ENG

Do not drop the product or let it fall over

when connecting external devices. Otherwise, this may result in injury or damage to the product.

Keep the anti-moisture packing material or

vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

Do not let your children climb or cling onto

the TV. Otherwise, the TV may fall over, which may cause serious injury.

Dispose of used batteries carefully

to ensure that a small child does not consume them. Please seek DoctorMedical Attention immediately if child consumes batteries.

Do not drop metallic objects such as

coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

Do not spray water on the product or

scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur.

Do not allow any impact, shock or any

objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged.

Never touch this product or antenna

during a thunder or lighting storm. You may be electrocuted.

Do not insert any metal objects/conductors

(like a metal chopstick/cutlery/screwdriver) between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging

Never touch the wall outlet when there is

leakage of gas, open the windows and ventilate. It may cause a fire or a burn by a spark.

into the wall input terminal. You may be electrocuted. (Depending on model)

Do not disassemble, repair or modify the

product at your own discretion.

Do not put or store inflammable

substances near the product. There is a danger of combustion/explosion or fire due

Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

to careless handling of the inflammable substances.

SAFETY INSTRUCTIONS

If any of the following occur, unplug the

product immediately and contact your local service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

Unplug the TV from AC mains wall socket

if you do not intend to use the TV for a long period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/ shock/fire.

Apparatus shall not be exposed to

dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

If you install the TV on a stand, you need

to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

If you intend to mount the product to a

wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Only use the attachments / accessories

specified by the manufacturer.

When installing the antenna, consult

with a qualified service technician. If not installed by a qualified technician, this may create a fire hazard or an electric shock hazard.

We recommend that you maintain a

distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.

ENGENGLISH

Install the product where no radio wave

occurs.

There should be enough distance between

an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock.

Do not install the product on places such

as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

Only use the specified type of battery.

This could cause damage to the remote control.

Do not mix new batteries with old

batteries. This may cause the batteries to overheat and leak.

Batteries should not be exposed to

excessive heat. For example, keep away from direct Sunlight, open fireplace and electric heaters. Do not place non-rechargeable batteries

in charging device.

Make sure there are no objects between

the remote control and its sensor.

SAFETY INSTRUCTIONS

Signal from Remote Control can be

ENGLISH

ENG

interrupted due to external/internal lighting eg Sunlight, fluorescent lighting.If this occurs turn off lighting or darken viewing area.

When connecting external devices such

as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Do not turn the product On/Off by

plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.

Please follow the installation instructions

below to prevent the product from overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

Take care not to touch the ventilation

openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product.

Prevent dust collecting on the power plug

pins or outlet. This may cause a fire hazard.

Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Do not press strongly upon the panel with

a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen.

Avoid touching the screen or holding your

finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen.

When cleaning the product and its

components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

Periodically examine the cord of your

appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

SAFETY INSTRUCTIONS

When unplugging the cable, grab the plug

and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.

When moving the product, make sure

you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

When moving or unpacking the product,

work in pairs because the product is heavy. Otherwise, this may result in injury.

Contact the service centre once a year to

clean the internal parts of the product. Accumulated dust can cause mechanical failure.

Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

If the product feels cold to the touch, there

may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

The panel is a high technology display

product with resolution of two million to six million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

You may find different brightness and

colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

Displaying a still image (e.g., broadcasting

channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in thirdparty products and is not subject to exchange or refund.

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing on the product. This generated sound does not affect the performance and reliability of the product.

ENGENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging

ENGLISH

ENG

(Only 3D models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive

seizure or chronic illness

ySome users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

yDo not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

y3D Contents are not recommended to those

who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yIf your eyesight varies between your right

and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or

refraining from watching 3D contents

yDo not watch 3D contents when you feel

fatigue from lack of sleep, overwork or drinking.

yWhen these symptoms are experienced,

stop using/watching 3D contents and get enough rest until the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

CAUTION

Viewing Environment

Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

yInfants/Children

- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yTeenagers

- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.

yElderly

- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise,

you may not be able to view 3D videos properly.

Do not use 3D glasses instead of your

normal glasses, sunglasses or protective goggles.

Using modied 3D glasses may cause eye

strain or image distortion.

Do not keep your 3D glasses in extremely

high or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy

to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yImage shown may differ from your TV. yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yThe available menus and options may differ from the input source or product model that you

are using. yNew features may be added to this TV in the future. yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption. yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yDo not use any unapproved items to ensure the safety and product life span. yAny damages or injuries by using unapproved items are not covered by the manufacturer’s

warranty. ySome models have a thin film attached on to the screen and this must not be removed.

ENGENGLISH

NOTE

yThe items supplied with your product may vary depending on the model. yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions. yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

10 mm

18 mm

ASSEMBLING AND PREPARING

ENGLISH

ENG

SAVING

1 2 3

4 5 6

7 809

FLASHBK

LIST

MARK

FAV

P A G

CHVOL

MUTE

INFO

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

AV MODE

INPUT

ENERGY

Remote control, batteries (AAA)

(Depending on model) (See p.30, 31, 32)

Cinema 3D Glasses

The number of 3D glasses may differ depending on the model or country. (Depending on model)

Magic remote control, batteries (AA)

(

Only LA620*, LA621*,

LA623T, LA640*,

LA66**, LA69**,

LA71**, LA74**,

LN570B, LN570Y, LN570Z, LN5700, LN572*, LN61**) (Depending on model) (See p.33)

Dual play glasses

(Depending on model)

Tag On

Owner’s manual Tag on

(Depending on model)

Cable holder

(Depending on

Power Cord

(Depending on model) model) (See p.24)

Desk-mount Screw

(1EA : Only 32/42/47/50/60LN570B, 32/42/47/50/60LN570Y, 32/42/47/50/60LN570Z, 32/42/47/50/60LN5700, 32/42/47/50/60LN572*) (2EA : Only

32/39/42/47/50LA62**,

32/42/47/50LA64**, 32/42/47/50LA66**,

47LA71**,

32/39LN56**,

32/42/47/50LN570T,

32/42/47/50LN571*, 32/42/47LN61**) (See p.20)

Desk-mount Cable

2EA

32/39/42/47/50LA62**,

32/42/47/50LA64**, 32/42/47/50LA66**,

47LA71**,

32/39LN56**,

32/42/47/50LN570T,

32/42/47/50LN571*, 32/42/47LN61**) (See p.20)

Bracket Screw

2EA, M4 x 8 (Only

32/39/42LA62**,

32/42LA64**, 32/42LA66**, 32/39LN56**,

32/42LN570T,

32/42LN571*, 32/42LN61**) (See p.20)

Bracket Screw

2EA, P4 x 8

(Only 47/50LA62**,

47/50LA64**,

47/50LA66**,

47LA71**,

47/50LN570T,

47/50LN571*,

47LN61**)

(See p.20)

ASSEMBLING AND PREPARING

ENGENGLISH

Stand Screws

8EA, M4 x 14 (Only LA62**, LA64**, LA66**, LA71**,

LN56**, LN570T,

LN571*, LN61**) (See p.17, 18)

Wall mount inner spacers

4EA (Only LA64**) (See p.23)

Stand Screws

4EA, M4 x 20 (Only LA69**,

LA74**)

(See p.18)

Blu-Ray

(Only LA6980)

Stand Screws

3EA, P5 x 25 4EA, M4 x 14 (Only LN570B, LN570Y, LN570Z, LN5700, LN572*) (See p.19)

Stand Body / Stand Base (Only LA62**,

32/42/47/50/55LA64**, LA66**, LA71**,

LN56**, LN570T,

LN571*, LN61**) (See p.17)

Isolator

(Depending on model) (See p.12)

Stand Base

(Only LA69**, LA74**) (See p.18)

Stand Body / Stand Base

(Only LN570B, LN570Y, LN570Z, LN5700, LN572*) (See p.19)

Stand Body / Stand Base

(Only 60LA64**)

(See p.18)

Cable Management

2 EA

(Only 60LA64**)

(See p.24)

ASSEMBLING AND PREPARING

ENGLISH

ENG

NOTE

yAntenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna

contact might be heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

Wall

ANTENNA/

CABLE IN

Cable / Antenna

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a

cable distribution system using coaxial cable, may in some circumstances create a re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

1. Connect to TV.

Isolator

2. Connect to Set-Top box.

ASSEMBLING AND PREPARING

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.

AG-F***DP

Dual play glasses

Tag On

Tag on

AN-WF100

Wi-Fi Dongle

AG-F***

Cinema 3D glasses

AN-VC4**

Video call camera

AN-MR400

Magic remote

LG Audio device

ENGENGLISH

Compatibility

AG-F***DP

Dual play glasses

AG-F***

Cinema 3D glasses

AN-MR400

Magic remote

AN-VC4**

Video call camera

LG Audio device

Tag on

AN-WF100

Wi-Fi Dongle

LN56** LN57**, LN61**

• • •

•

LA62**, LA64**, LA66**,

LA69**, LA71**, LA74**

•

The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.

SETTINGS

INPUT

SETTINGS

INPUT

ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

ENG

A type : LA62**, 32/42/47/50/55LA64**, LA66**, LA71**, LN56**, LN570T, LN571*, LN61**

Speakers

Screen

SETTINGS

INPUT

Remote control sensor LG Logo light (Only 32/42/47/50/55LA64**, LA66**,

LA71**)

Power Indicator (Only LN56**, LN570T, LN571*, LN61**,

LA62**)

Buttons

B type : 60LA64**

C type : LA69**, 42/47/55LA74**

Screen

Remote control sensor LG Logo light

Screen

Remote control sensor LG Logo light

Buttons

Speakers

Buttons

Speakers

ASSEMBLING AND PREPARING

SETTINGS

INPUT

SETTINGS

INPUT

ENGENGLISH

D type : 60LA74**

E type : LN570B, LN570Y, LN570Z, LN5700, LN572*

Speakers

Screen

Remote control sensor LG Logo light

Screen

Buttons

Remote control sensor Power Indicator

Button Description

Scrolls through the saved programmes.

Adjusts the volume level.

Selects the highlighted menu option or confirms an input.

S Accesses the main menu, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

NOTE

yYou can set the LG Logo light to on or off by selecting OPTION in the main menus. (Depending

on model)

ASSEMBLING AND PREPARING

Lifting and moving the TV

ENGLISH

ENG

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yAvoid touching the screen at all times, as

this may result in damage to the screen.

yIt is recommended to move the TV in the

box or packing material that the TV originally came in.

yBefore moving or lifting the TV, disconnect

the power cord and all cables.

yWhen holding the TV, the screen should face

away from you to avoid damage.

yHold the top and bottom of the TV frame

rmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

yWhen transporting a large TV, there should

be at least 2 people.

yWhen transporting the TV by hand, hold the

TV as shown in the following illustration.

yWhen transporting the TV, do not expose the

TV to jolts or excessive vibration.

yWhen transporting the TV, keep the TV

upright, never turn the TV on its side or tilt towards the left or right.

yDo not apply excessive pressure to cause

exing /bending of frame chassis as it may

damage screen.

+ 36 hidden pages