LG 50UM7300PSA, 43UM7300PDA, 43UM7100PDA, 43UM7100PSA, 43UM7300PSA Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it
for future reference.

43UM7100PDA

43UM7100PSA

43UM7300PDA

43UM7300PSA

43UM7360PSA

43UM7500PSB

43UM7510PSB

49UM7100PDA

49UM7100PSA

49UM7300PDA

49UM7300PSA

49UM7360PSA

50UM7300PDA

50UM7300PSA

50UM7360PSA

50UM7500PDB

50UM7500PSB

50UM7510PSB

55UM7100PSA

55UM7200PSA

*MFL71139802*

(2002-REV02)

55UM7400PDA

55UM7400PSA

55UM7470PSA

55UM7520PSB

55UM7650PDB

55UM7650PSB

60UM7200PDA

60UM7200PSA

60UM7270PSA

65UM7100PSA

Copyright © 2019 LG Electronics Inc. All Rights Reserved.

65UM7400PDA

65UM7400PSA

65UM7470PSA

65UM7520PSB

65UM7650PDB

65UM7650PSB

70UM7370PDA

70UM7370PSA

75UM7100PSA

75UM7510PSB

75UM7570PDB

75UM7570PSB

82UM7570PDB

82UM7570PSB

82UM7670PSB

www.lg.com

ENGLISH

Important Safety Instruction

•  Read these instructions.

•  Keep these instructions.

•  Heed all warnings. 

•  Follow all instructions.

•  Do not use this apparatus near water.

•  Clean only with dry cloth.

•  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

•  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided 
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

•  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the 
apparatus.

•  Only use attachments/accessories specied by the manufacturer.

•  Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury from tip-over.

•  Unplug this apparatus during lightning storms or when unused for long periods of time.

•  Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, 
does not operate normally, or has been dropped.

2

ENGLISH

Warning! Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE 
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO 
QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of 

uninsulated dangerous voltage within the product’s enclosure 
that may be of sucient magnitude to constitute a risk of electric 
shock to persons.

The symbol is intended to alert the user to the presence of 

important operating and maintenance (servicing) 
instructions in the literature accompanying the device.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS 
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•  Do not place the TV and/or remote control in the following

environments:

 - Keep the product away from direct sunlight.

 - An area with high humidity such as a bathroom

 - Near any heat source such as stoves and other devices that 

produce heat.

 - Near kitchen counters or humidiers where they can easily be 

exposed to steam or oil.

 - An area exposed to rain or wind.

 - Do not expose to dripping or splashing and do not place objects 

lled with liquids, such as vases, cups, etc. on or over the 
apparatus (e.g., on shelves above the unit).

 - Near ammable objects such as gasoline or candles, or expose 

the TV to direct air conditioning.

 - Do not install in excessively dusty places. 

Otherwise, this may result in re, electric shock, combustion/
explosion, malfunction or product deformation.

•  Ventilation

 - Install your TV where there is proper ventilation. Do not install in 

a conned space such as a bookcase.

 - Do not install the product on a carpet or cushion.

 - Do not block or cover the product with cloth or other materials 

while unit is plugged in.

•  Take care not to touch the ventilation openings. When watching 
the TV for a long period, the ventilation openings may become hot.

•  Protect the power cord from physical or mechanical abuse, such as 
being twisted, kinked, pinched, closed in a door, or walked upon. 
Pay particular attention to plugs, wall outlets, and the point where 
the cord exits the device.

•  Do not move the TV whilst the Power cord is plugged in.

•  Do not use a damaged or loosely tting power cord.

•  Be sure do grasp the plug when unplugging the power cord. Do not 
pull on the power cord to unplug the TV.

•  Do not connect too many devices to the same AC power outlet as 
this could result in re or electric shock.

•  Disconnecting the Device from the Main Power

 - The power plug is the disconnecting device. In case of an 

emergency, the power plug must remain readily accessible.

•  Do not let your children climb or cling onto the TV. Otherwise, the 
TV may fall over, which may cause serious injury.

•  Outdoor Antenna Grounding (Can dier by country):

 - If an outdoor antenna is installed, follow the precautions below. 

An outdoor antenna system should not be located in the vicinity 
of overhead power lines or other electric light or power circuits, 
or where it can come in contact with such power lines or circuits 
as death or serious injury can occur. 
Be sure the antenna system is grounded to provide some 
protection against voltage surges and built-up static charges.  
Section 810 of the National Electrical Code (NEC) in the U.S.A. 
provides information with respect to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to grounding 
electrodes and requirements for the grounding electrode. 
Antenna grounding according to the National Electrical Code, 
ANSI/NFPA 70

3

ENGLISH

•  Grounding (Except for devices which are not grounded.)

 - TV with a three-prong grounded AC plug must be connected to 

a three-prong grounded AC outlet. Ensure that you connect the 
earth ground wire to prevent possible electric shock.

•  Never touch this apparatus or antenna during a lightning storm. 
You may be electrocuted.

•  Make sure the power cord is connected securely to the TV and wall 
socket if not secured damage to the Plug and socket may occur and 
in extreme cases a re may break out.

•  Do not insert metallic or inammable objects into the product. If a 
foreign object is dropped into the product, unplug the power cord 
and contact the customer service.

•  Do not touch the end of the power cord while it is plugged in. You 
may be electrocuted.

•  If any of the following occur, unplug the product

immediately and contact your local customer service.

 - The product has been damaged.

 - If water or another substance enters the product (like an AC 

adapter, power cord, or TV).

 - If you smell smoke or other odors coming from the TV

 - When lightning storms or when unused for long periods of time.

Even the TV is turned o by remote control or button, AC power 
source is connected to the unit if not unplugged in.

•  Do not use high voltage electrical equipment near the TV (e.g., a 
bug zapper). This may result in product malfunction.

•  Do not attempt to modify this product in any way without written 
authorization from LG Electronics. Accidental re or electric shock 
can occur. Contact your local customer service for service or repair. 
Unauthorized modication could void the user’s authority to 
operate this product.

•  Use only an authorized attachments / accessories approved by 
LG Electronics. Otherwise, this may result in re, electric shock, 
malfunction, or product damage.

•  Never disassemble the AC adapter or power cord. This may result in 
re or electric shock.

•  Handle the adapter carefully to avoid dropping or striking it. An 
impact could damage the adapter.

•  To reduce the risk of re or electrical shock, do not touch the TV 
with wet hands. If the power cord prongs are wet or covered with 
dust, dry the power plug completely or wipe dust o.

•  Batteries

 - Store the accessories (battery, etc.) in a safe location out of the 

reach of children.

 - Do not short circuit, disassemble, or allow the batteries to 

overheat. Do not dispose of batteries in a re. Batteries should 
not be exposed to excessive heat.

•  Moving

 - When moving, make sure the product is turned o, unplugged, 

and all cables have been removed. It may take 2 or more people 
to carry larger TVs. Do not press or put stress on the front panel 
of the TV. Otherwise, this may result in product damage, re 
hazard or injury.

•  Keep the packing anti-moisture material or vinyl packing out of the 
reach of children.

•  Do not allow an impact shock, any objects to fall into the product, 
and do not drop anything onto the screen.

•  Do not press strongly upon the panel with a hand or a sharp 
object such as a nail, pencil, or pen, or make a scratch on it. It may 
causedamage to screen.

•  Cleaning

 - When cleaning, unplug the power cord and wipe gently with a 

soft/dry cloth. Do not spray water or other liquids directly on the 
TV. Do not clean your TV with chemicals including glass cleaner, 
any type of air freshener, insecticide, lubricants, wax (car, 
industrial), abrasive, thinner, benzene, alcohol etc., which can 
damage the product and/or its panel. Otherwise, this may result 
in electric shock or product damage.

4

ENGLISH

Preparing

<

Optional Extras

•  When the TV is turned on for the rst time after being shipped 
from the factory, initialization of the TV may take approximately 
one minute.

•  Image shown may dier from your TV.

•  Your TV’s OSD (On Screen Display) may dier slightly from that 
shown in this manual.

•  The available menus and options may dier from the input source 
or product model that you are using.

•  New features may be added to this TV in the future.

•  The device must be easily accessed to a location outlet near the 
access. Some devices are not made by turning on / o button, 
turning o the device and unplugging the power cord.

•  The items supplied with your product may vary depending upon 
the model.

•  Product specications or contents of this manual may be changed 
without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should 
have bezels less than 10 mm thick and 18 mm width.

•  Use an extension cable that supports   if the USB cable or 
USB ash drive does not t into your TV’s USB port.

•  Use a certied cable with the HDMI logo attached. If you do not use 
a certied HDMI cable, the screen may not display or a connection 
error may occur.

•  Recommended HDMI cable types (3 m or less) 

 - Ultra High Speed HDMI cable®/TM  

B

A

B

*A < 10 mm

A

 18 mm  

*B 

Optional extras can be changed or modied for quality improvement 
without any notication. Contact your dealer for buying these items. 
These devices work only with certain models.

The model name or design may be changed due to the manufacturer’s 
circumstances or policies.

Magic Remote Control

(Depending upon model)

AN-MR19BA

Check whether your TV model supports Bluetooth in the Wireless 
Module Specication to verify whether it can be used with the Magic 
Remote.

5

ENGLISH

A

B

Wall Mounting Bracket

(Depending upon model)
Make sure to use screws and wall mounts that meet the VESA standard.

Standard dimensions for the wall mount kits are described in the 
following table.

49/55UM71*

Model

VESA (A x B) (mm)
Standard screw
Number of screws
Wall mount bracket

(optional)

Model

VESA (A x B) (mm)
Standard screw M6 M8
Number of screws 4 4

Wall mount bracket
(optional)

43UM71*
43/50UM73*
43/50UM75*

200 x 200
M6

4

LSW240B 
MSW240

65UM71*
60UM72*
65UM74*
65UM75*
65UM76*

300 x 300 600 x 400

OLW480B LSW640B

55UM72*
49UM73*
55UM74*
55UM75*
55UM76*

300 x 300
M6

4

OLW480B 
MSW240

75UM71*
70UM73*
75/82UM75*
82UM76*

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV 
from being scratched or damaged and for safe transportation regardless 
of its type and size.

•  It is recommended to move the TV in the box or packing material 
that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and 
all cables.

•  When holding the TV, the screen should face away from you to 
avoid damage.

•  Hold the top and bottom of the TV frame rmly. Make sure not to 
hold the transparent part, speaker, or speaker grille area.

•  Use at least two people to move a large TV.

•  When transporting the TV by hand, hold the TV as shown in the 
following illustration.

•  When transporting the TV, do not expose the TV to jolts or 
excessive vibration.

•  When transporting the TV, keep the TV upright; never turn the TV 
on its side or tilt towards the left or right.

•  When handling the TV, be careful not to damage the protruding 
buttons.

6

ENGLISH

•  Avoid touching the screen at all times, as this may result in 
damage to the screen.

•  Do not place the product on the oor with its front facing 
down without padding. Failure to do so may result in 
damage to the screen.

•  When attaching the stand to the TV set, place the screen 
facing down on a cushioned table or at surface to protect 
the screen from scratches.

Mounting on the Table

1  Lift and tilt the TV into its upright position on a table.

•  Leave a minimum of 10 cm space from the wall for proper 
ventilation.

10 cm

cm

10

cm

10

10

cm

10

cm

•  Do not apply foreign substances (oils, lubricants, etc.) to 
the screw parts when assembling the product.  
(Doing so may damage the product.)

•  If you install the TV on a stand, you need to take actions 
to prevent the product from overturning. Otherwise, the 
product may fall over, which may cause injury.

•  Do not use any unapproved items to ensure the safety and 
product life span.

•  Any damage or injuries caused by using unapproved items 
are not covered by the warranty.

•  Make sure that the screws are fastened tightly. (If they 
are not fastened securely enough, the TV may tilt forward 
after being installed.)

•  Do not fasten the screws with excessive force otherwise 
they may strip and become loose.

Securing TV to the Wall

(Depending upon model)

2  Connect the power cord to a wall outlet.

(Depending upon model)

1  Insert and tighten the eye-bolts or TV brackets and bolts on the back 

of the TV.

•  If there are bolts inserted at the eye-bolts position, remove the 
bolts rst.

2  Mount the wall brackets with the bolts to the wall. Match the 

location of the wall bracket and the eye-bolts on the rear of the TV.

3  Connect the eye-bolts and wall brackets tightly with a sturdy rope or 

cable. Make sure to keep the rope parallel to the at surface.

•  Use a platform or cabinet that is strong and large enough to 
support the TV securely.

•  Brackets, bolts, and ropes are optional. You can obtain additional 
accessories from your local dealer.

7

ENGLISH

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult 
with your local dealer for a wall mount that supports the VESA 
standard used by your TV model. Carefully attach the wall mount 
bracket at the rear of the TV. Install the wall mount bracket on a solid 
wall perpendicular to the oor. If you are attaching the TV to other 
building materials, please contact qualied personnel to install the 
wall mount. Detailed instructions will be included with the wall mount. 
We recommend that you use an LG brand wall mount. The LG wall 
mount is easy to adjust or to connect the cables. When you do not use 
LG’s wall mount bracket, use a wall mount bracket where the device is 
adequately secured to the wall with enough space to allow connectivity 
to external devices. If you are using a non-adjustable mount, attach the 
mount to the wall. Attach the cables to the TV rst, then attach the TV 
to the mount.

10 cm

cm

10

cm

10

10

cm

10 

cm

82UM76*

•  Do not use a sharp object when you detached the cable 
cover. This could damage the cable or the cabinet. It may 
also cause personal harm, (Depending upon model).

•  When installing the wall mounting bracket, it is recommended to 
cover the stand hole using tape, in order to prevent the inux of 
dust and insects, (Depending upon model).

(Depending upon model)

•  Remove the stand before installing the TV on a wall 
mount by performing the stand attachment in reverse.

•  For more information of screws and wall mount bracket, 
refer to the Separate purchase.

•  If you intend to mount the product to a wall, attach VESA 
standard mounting interface (optional parts) to the back 
of the product. When you install the set to use the wall 
mounting bracket (optional parts), x it carefully so as 
not to drop.

•  When mounting a TV on the wall, make sure not to install 
the TV by hanging the power and signal cables on the 
back of the TV.

•  Do not install this product on a wall if it could be exposed 
to oil or oil mist. This may damage the product and cause 
it to fall.

Stand hole

8

ENGLISH

Connections

You can connect various external devices to the TV. For more 
information on external device’s connection, refer to the manual 
provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to 
the following. The illustrations may dier from the actual items and an 
RF cable is optional.

•  Make sure not to bend the copper wire of the RF cable.

Copper wire

•  Complete all connections between devices, and then connect the 
power cord to the power outlet to prevent damage to your TV.

•  To improve the picture quality in a poor signal area, purchase a 
signal amplier.

•  Use a signal splitter to use 2 TVs or more.

•  If the antenna is not installed properly, contact your dealer for 
assistance.

•  This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts 
directly because the related standards have not been conrmed.

Other connections

Connect your TV to external devices. For the best picture and audio 
quality, connect the external device and the TV with the HDMI cable.

HDMI

When connecting the HDMI cable, the product and external devices 

• 
should be turned o and unplugged.

•  Supported HDMI Audio format:  
(Depending upon model) 
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), 
DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 
kHz),
True HD (48 kHz), 
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), 
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

(Only UHD models)

•   →   ( ) → [Picture] → [Additional Settings] → [HDMI 
ULTRA HD Deep Color]

 - On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

 - O: Support 4K @ 50/60 Hz 8bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep 
Color, your picture may be clearer. However, if the device doesn’t 
support it, it may not work properly. In that case, change the TV’s 
[HDMI ULTRA HD Deep Color] setting to o.

 - This feature is available only on certain models which support 

HDMI ULTRA HD Deep Color. 

9

ENGLISH

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD 
players, VCRs, audio systems, USB storage devices, PC, gaming devices, 
and other external devices.

•  If you record a TV program on a Blu-ray/DVD recorder or VCR, make 
sure to connect the TV signal input cable to the TV through a DVD 
recorder or VCR. For more information about recording, refer to the 
manual provided with the connected device.

•  The external device connections shown may dier slightly from 
illustrations in a manual.

•  Connect external devices to the TV regardless about the order of 
the TV port.

•  If you connect a gaming device to the TV, use the cable supplied 
with the gaming device.

•  Refer to the external equipment’s manual for operating 
instructions.

•  In PC mode, there may be noise associated with the resolution, 
vertical pattern, contrast or brightness. If noise is present, change 
the PC output to another resolution, change the refresh rate to 
another rate or adjust the brightness and contrast on the [PICTURE] 
menu until the picture is clear.

•  Some USB Hubs may not work. If a USB device connected through 
a USB Hub is not detected, connect it directly to the USB port on 
the TV.

•  When connecting via a wired LAN, it is recommended to use a CAT 
7 cable. (Only when   port is provided.)

Using Button

You can simply operate the TV functions, using the button.

Basic functions

Power On (Press)
Power O 1 (Press and Hold)
Menu Control (Press 2)
Menu Selection (Press and Hold 3)

1  All running apps will close, and any recording in progress will stop.
2  You can access and adjust the menu by pressing the button when

TV is on.

3  You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the   button one time. You can adjust 
the Menu items using the button.

Turns the power o.
Changes the input source.
Adjusts the volume level. 
Scrolls through the saved Channels.

10

ENGLISH

Using Remote Control

** To use the button, press and hold for more than 1 second.

(Depending upon model)
The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly.
To install batteries, open the battery cover, replace batteries (1.5 V AAA)

matching the   and   ends to the label inside the compartment, 
and close the battery cover. To remove the batteries, perform the 
installation actions in reverse. This remote uses infrared light. When in 
use, it should be pointed in the direction of the TV’s remote sensor.

Make sure to point the remote control toward the remote control sensor 
on the TV.

1

1

1

(POWER)  Turns the TV on or o.

  Returns to the last TV channel.

 (SEARCH)  Shows the search mode.

     Activates or deactivates the subtitles.  

Activates your preferred subtitle in digital mode.

(Q. Settings) Accesses the Quick Settings.
 (INPUT) Changes the input source.

Number button  Enters numbers.

**

  Accesses the [QUICK HELP].

 (Dash)  Inserts a   between numbers such as 2-1 and 2-2.

  Accesses the saved channels list.

**

  Edits QUICK ACCESS. 

 - QUICK ACCESS is a feature that allows you to enter a specied app 

or Live TV directly by pressing and holding the number buttons.

 (MORE ACTIONS)  Displays more remote control functions.

  Adjusts the volume level.

  Accesses your favorite channel list.

  Displays the program event according to time scheduler.

(MUTE )  Mutes all sounds.

** 

(MUTE) Accesses the [Accessibility] menu.

  Scrolls through the saved channels.

  Moves to the previous or next screen.

1

Streaming Service buttons  Connects to the Video Streaming 

Service.

 (HOME)  Accesses the Home menu.

**

 (HOME)  Shows the previous history.

  Returns to the previous screen.

  Clears on-screen displays and returns to last input viewing.

Navigation button (up / down / left / right)  
Scrolls through menus or options.

 (OK)  Selects menus or options and conrms your input.

Shows information on the current program.
  Enables SAP (Secondary Audio Program) Feature.
  Starts to record. (Only Time Machine

 Ready

 supported model)

 (Control buttons)  Control buttons for media 

contents.

,  ,  ,    These access special functions in some menus.

(Some buttons and services may not be provided depending upon 
models or regions.)

11

ENGLISH

Using Magic Remote Control

** To use the button, press and hold for more than 1 second.

(Depending upon model)
The descriptions in this manual are based on the buttons on the remote

control. Please read this manual carefully and use the TV correctly. 
When the message [Magic remote battery is low. Please Change the

battery.] is displayed, replace the batteries.
To install batteries, open the battery cover, replace batteries (1.5 V AA)

matching the   and   ends to the label inside the compartment, 
and close the battery cover. Be sure to point the magic remote toward 
the remote control sensor on the TV. To remove the batteries, perform 
the installation actions in reverse. This remote uses infrared light. When 
in use, it should be pointed in the direction of the TV’s remote sensor.

11

1

(Some buttons and services may not be provided depending upon 
models or regions.)

(POWER)  Turns the TV on or o.
 (STB POWER)  You can turn your set-top box on or o by adding

the set-top box to the universal remote control for your TV.
Number buttons  Enters numbers.

**

  Accesses the [QUICK HELP].

(DASH)  Inserts a   between numbers such as 2-1 and 2-2. 

  Accesses the saved channels list.

 (MORE ACTIONS)  Displays more remote control functions.

 **  Edits QUICK ACCESS. 

 - QUICK ACCESS is a feature that allows you to enter a specied app 

or Live TV directly by pressing and holding the number buttons.

**

 (Secondary Audio Program)  feature can also be enabled 

 by pressing the button.

      Adjusts the volume level.

 (MUTE)  Mutes all sounds. 

**

 (MUTE) Accesses the [Accessibility] menu.

      Scrolls through the saved Channels.

**

 (Voice recognition) Network connection is required to use the 

voice recognition function. Once the voice display bar is activated on 
the TV screen, press and hold the button and speak your command 
out loud.

 (HOME)  Accesses the Home menu.

**

 (HOME) Shows the previous history.

 (Q. Settings) Accesses the Quick Settings

**

 (Q. Settings) Displays the [All Settings] menu.

 Wheel (OK)  Press the center of the   button to select a menu. 

You can change Channels by using the   button.

       (up/down/left/right)  Press the up, down, left or right 

button to scroll the menu. If you press         buttons while the 
pointer is in use, the pointer will disappear from the screen and Magic 
Remote will operate like a general remote control. To display the 
pointer on the screen again, shake Magic Remote to the left and right.

 (BACK)  Returns to the previous screen.

**

 (BACK)  Clears on-screen displays and returns to last input 

viewing.

  Displays the program event according to time scheduler.

1

Streaming Service buttons Connects to the Video Streaming 

Service.

 (INPUT)  Changes the input source.

**

 (INPUT) Accesses the [HOME DASHBOARD].

**

  Runs the record function.

  These access special functions in some menus.

, (Control buttons)  Controls media contents.

12

ENGLISH

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, rst pair it with your TV. 

1   Put batteries into the Magic Remote and turn the TV on.
2  Point the Magic Remote at your TV and press the   Wheel (OK) on

the remote control.

*   If the TV fails to register the Magic Remote, try again after turning 

the TV off and back on.

How to deregister the Magic Remote Control

Press the   (BACK) and   (HOME) buttons at the same time, for 
ve seconds, to unpair the Magic Remote with your TV.

*   Pressing and holding the   button will let you cancel and re-regis-

ter Magic Remote at once.

•  Do not mix new batteries with old batteries. This may 
cause the batteries to overheat and leak.

•  Failure to match the correct polarities of the battery may 
cause the battery to burst or leak, resulting in re, personal 
injury, or ambient pollution.

•  This apparatus uses batteries. In your community there 
might be regulations that require you to dispose of these 
batteries properly due to environmental considerations. 
Please contact your local authorities for disposal or 
recycling information.

•  Batteries inside or inside the product shall not be exposed 
to excessive heat such as sunshine, re or the like.

User Guide

For more information about this TV, read the USER GUIDE embedded in 
the product.

•  To open the USER GUIDE   →   ( ) → [General] → [About 
This TV] → [User Guide]

Troubleshooting

Cannot control the TV with the remote control.

•  Check if anything such as tape has been placed over the receiver.

•  Check if there is any obstacle between the product and the remote 
control.

• 

Replace the batteries with new fresh ones.

No image display and no sound is produced.

•  Check if the product is turned on. 

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other 
products.

The TV turns o suddenly.

•  Check the power control settings. The power supply may be 
interrupted.

• 

Check if the auto-o function is activated in the settings menu. 

•  If there is no signal while the TV is on, the TV will turn o 
automatically after 15 minutes of inactivity.

Abnormal Display

• 

If the TV feels cold to the touch, there may be a small icker when 
it is turned on. This is normal; there is nothing wrong with TV. 
Some minute dot defects may be visible on the screen, appearing 
as tiny red, green, or blue spots. However, they have no adverse 
eect on the TV’s performance. Avoid touching the LCD screen or 
holding your nger(s) against it for long periods of time. Doing so 
may produce some temporary distortion eects on the screen.

•  This panel is an advanced product that contains millions of pixels. 
In a very few cases, you could see ne dots on the screen while 
you’re viewing the TV. Those dots are deactivated pixels and do not 
aect the performance and reliability of the TV.

•  Displaying a still image for a prolonged period of time may cause 
an image sticking. Avoid displaying a xed image on the TV screen 
for a extended length of time.

13

ENGLISH

Generated Sound

•  Cracking noise

turning o the TV is generated by plastic thermal contraction due 
to temperature and humidity. This noise is common for products 
where thermal deformation is required.

•  Electrical circuit humming/panel buzzing A low level noise 

is generated from a high-speed switching circuit, which supplies a 
large amount of current to operate a product. It varies depending 
upon the product. This generated sound does not aect the 
performance and reliability of the product.

 A cracking noise that occurs when watching or 

•  When cleaning the product, be careful not to allow any 
liquid or foreign objects to enter the gap between the 
upper, left or right side of the panel and the guide panel, 
(Depending upon model).

•  Make sure to wring any excess water or cleaner from the 
cloth.

•  Do not spray water or cleaner directly onto the TV screen.

•  Make sure to spray just enough of water or cleaner onto a 
dry cloth to wipe the screen.

14

ENGLISH

Specications

Product specications may be changed without prior notice due to upgrade of product functions.

(Depending upon country)

Broadcasting Specifications

For UM7100PS, UM7200PS, UM7270PS, UM7300PS,

MODEL

Television system

Program coverage

(Band)

External antenna

impedance

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is congured for the regional 
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. 
FCC ID: BEJLGSBWAC92
IC: 2703H-LGSBWAC92

UM7360PS, UM7370PS, UM7400PS, UM7470PS,
UM7500PS, UM7510PS, UM7520PS, UM7570PS,

UM7650PS, UM7670PS Series

Digital Analog Digital Analog

SBTVD

UHF 14-69

CATV 1-135

Wireless module (LGSBWAC92)Specifications

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz

5150 to 5725 MHz
5725 to 5850 MHz

Frequency Range Output Power (Max.)

2400 to 2483.5 MHz 8 dBm

NTSC, PAL-M/N DVB-T/T2 NTSC, PAL-M/N

VHF 2-13 

DTV 2-69

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Bluetooth

For UM7100PD, UM7200PD, UM7300PD, UM7370PD,

UM7400PD, UM7500PD, UM7570PD,

UM7650PD Series

VHF 2-13 

UHF 14-69

DTV 2-69

CATV 1-125

75 Ω

18 dBm
18 dBm
18 dBm

Environment condition

Operating Temperature 0 °C to 40 °C

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

•  The energy information provided on the product is shown in accordance with the applicable regulations of each respective country, (Depending 
upon the country).

 - The Energy consumption was measured in accordance with IEC 62087.

•  The actual energy consumption depends on the usage environment, (Example: content watched, TV settings, etc.).

15

ENGLISH

Open Source Software
Notice Information

Regulatory

To obtain the source code under GPL, LGPL, MPL, and other open source 
licenses, that is contained in this product, please visit  
http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty 
disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for 
a charge covering the cost of performing such distribution (such as the 
cost of media, shipping, and handling) upon email request to openso 
[e-mail].

This oer is valid for a period of three years after our last shipment of 
this product. This oer is valid to anyone in receipt of this information.

Licenses

(Magic Remote supported models only)

WARNING!

Never place a television set in an unstable location. A television set may 
fall, causing serious personal injury or death. Many injuries, particularly 
to children, can be avoided by taking simple precautions such as:

•  Using cabinets or stands recommended by the manufacturer of the 
television set.

•  Only using furniture that can safely support the television set.

•  Ensuring the television set is not overhanging the edge of the 
supporting furniture.

•  Not placing the television set on tall furniture (for example, 
cupboards or bookcases) without anchoring both the furniture and 
the television set to a suitable support.

•  Not placing the television set on cloth or other materials that may 
be located between the television set and supporting furniture.

•  Educating children about the dangers of climbing on furniture to 
reach the television set or its controls.

If your existing television set is being retained and relocated, the same 
considerations as above should be applied.

Symbols

Refers to alternating current (AC).
Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

16