LG 50PZ950S-ZA, 50PZ950G-ZA Schematic

PLASMA TV
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CHASSIS : PD12C
MODEL : 50PZ950S 50PZ950S-ZA
50PZ950G-ZA
North/Latin America http://aic.lgservice.com Europe/Africa http://eic.lgservice.com Asia/Oceania http://biz.lgservice.com
Internal Use Only
Printed in Korea
P/NO : MFL67083603(1103-REV00)
- 2 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
CONTENTS
CONTENTS ............................................................................................................................... 2
SAFETY PRECAUTIONS ...........................................................................................................3
SPECIFICATION.........................................................................................................................4
ADJUSTMENT INSTRUCTION ..................................................................................................6
BLOCK DIAGRAM....................................................................................................................11
EXPLODED VIEW ..................................................................................................................12
SCHEMATIC CIRCUIT DIAGRAM ..............................................................................................
- 3 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
SAFETY PRECAUTIONS
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.
General Guidance
An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks.
It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this monitor is blown, replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1Mand 5.2M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check.
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.
Leakage Current Hot Check circuit
1.5 Kohm/10W
To Instrument’s exposed METALLIC PARTS
Good Earth Ground such as WATER PIPE, CONDUIT etc.
AC Volt-meter
IMPORTANT SAFETY NOTICE
0.15uF
- 4 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
V Application Range
This spec is applied to PDP TV used PD12C Chassis.
V Specification
Each part is tested as below without special appointment. (1) Temperature : 25 °C ± 5 °C (77 °F ± 9 °F), CST : 40 ± 5 (2) Relative Humidity: 65 % ± 10 % (3) Power Voltage: Standard Input voltage (100 V - 240 V ~, 50 / 60 Hz)
* Standard Voltage of each product is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
SBOM.
(5) The receiver must be operated for about 20 minutes prior to the adjustment.
V Test Method
(1) Performance : LGE TV test method followed. (2) Demanded other specification
Safety : CE, IEC specification EMC : CE, IEC
V Module Specification
(1) 3D 50” FHD
50PZ950S-ZA
50PZ950G-ZA
Albania, Austria, Belgium, Bosnia, Bulgaria, Coratia, Czech, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Kazakhstan, Latvia, Lithuania, Luxembourg, Morocco, Netherlands, Norway,
Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey, Ukraine, UK
LG
Model Name Market Place Brand
Model Name
50PZ950S-ZA
50PZ950G-ZA
Remark
Safety : IEC/ EN60065,
EMI : EN55013
EMS : EN55020
Market
Albania, Austria, Belgium, Bosnia, Bulgaria, Coratia, Czech, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Kazakhstan, Latvia, Lithuania, Luxembourg, Morocco, Netherlands,
Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia,
Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, UK
No Item Specification Remark
1 Display Screen Device 127 cm (50 inch) wide Color Display Module PDP
2 Aspect Ratio 16:9
3 PDP Module PDP50R3####,
RGB Closed (Well) Type, Glass Filter (43%)
Pixel Format: 1920 horiz. By 1080 ver.
4 Operating Environment 1) Temp. : 0 deg ~ 40 deg
2) Humidity : 20 % ~ 80% LGE SPEC
5 Storage Environment 3) Temp. : -20 deg ~ 60 deg
4) Humidity : 10 % ~ 90 %
6 Input Voltage AC 100 V ~ 240 V, 50 / 60 Hz Maker LG
- 5 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
V Model General Specification
No Item Specification Remarks
1 Market Albania, Austria, Belgium, Bosnia, Bulgaria, 36 Country
Coratia, Czech, Denmark, Estonia, Finland, ,
France, Germany, Greece, Hungary, Ireland,
Italy, Kazakhstan, Latvia, Lithuania, Luxembourg,
Morocco, Netherlands, Norway, Poland, Portugal,
Romania, Russia, Serbia, Slovenia, Spain, Sweden,
Slovakia, Switzerland, Turkey, Ukraine, UK
2 Broadcasting system 1) PAL/SECAM BG EU (PAL Market)
2) PAL/SECAM DK
3) PAL Ⅰ/Ⅱ
4) SECAM L/L’
5) DVB T / T2 Supporting T2 is only for **PZ***T./W
6) DVB C
7) DVB S Supporting S is only for **PZ***S/G
3 Receiving system Analog : Upper Heterodyne
G DVB-T
Digital : COFDM - Guard Interval(Bitrate_Mbit/s)
- Guard Interval(Bitrate_Mbit/s)
1/4, 1/8, 1/16, 1/32
- Modulation : Code Rate
QPSK : 1/2, 2/3, 3/4, 5/6, 7/8
16-QAM : 1/2, 2/3, 3/4, 5/6, 7/8
64-QAM : 1/2, 2/3, 3/4, 5/6, 7/8
G DVB-C
- Symbolrate :
4.0Msymbols/s to 7.2Msymbols/s
- Modulation :
16QAM, 64-QAM, 128-QAM and 256- QAM
G DVB-S
- symbolrate
DVB-S2 (8PSK / QPSK) : 2 ~45Msymbol/s
DVB-S (QPSK) : 2 ~ 45Msymbol/s
- viterbi
DVB-S mode : 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 mode : 1/2, 2/3, 3/4, 3/5, 4/5,
5/6, 8/9, 9/10
4 Scart Jack (1EA) PAL, SECAM Scart 1 Jack is Full scart and support
RF-OUT(Analog), MNT-OUT
5 Video Input (1EA) PAL, SECAM, NTSC Side AV
6 Component Input (1EA) Y/Cb/Cr, Y/ Pb/Pr
7 RGB Input RGB-PC Analog (D-Sub 15Pin)
8 HDMI Input (4EA) HDMI-PC HDMI/DTV,HDMI2, HDMI3, HDMI4
HDMI-DTV
9 Audio Input (3 EA) RGB/DVI Audio, Component, AV L/R Input
10 SPDIF Out(1 EA) SPDIF Out
11 USB(2EA) For SVC, S/W Download, X-Studio, DivX
12 Ethernet LAN
- 6 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
ADJUSTMENT INSTRUCTION
1. Application Range
This spec sheet is applied to all of the PD12C chassis.
2. Specification
(1) Because this is not a hot chassis, it is not necessary to use
an isolation transformer. However, the use of isolation
transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of
25 °C ± 5 °C of temperature and 65 % ± 10 % of relative humidity if there is no specific designation.
(4) The input voltage of the receiver must keep 100 V ~ 240
V, 50 / 60 Hz.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment when module is in the circumstance of over 15 °C
- In case of keeping module is in the circumstance of 0 °C, it should be placed in the circumstance of above 15 °C for 2 hours
- In case of keeping module is in the circumstance of below
-20 °C, it should be placed in the circumstance of above 15 °C for 3 hours,.
O After RGB Full White in HEAT-RUN Mode, the receiver
must be operated prior to the adjustment.
O Enter into HEAT-RUN MODE
1) Press the POWER ON KEY on R/C for adjustment.
2) OSD display and screen display PATTERN MODE.
- Set is activated HEAT run without signal generator in this mode.
- Single color pattern ( WHITE ) of HEAT RUN MODE uses to check panel.
- Caution : If you turn on a still screen more than 20
minutes (Especially digital pattern, cross hatch pattern), an after image may be occur in the black level part of the screen.
3. PCB assembly adjustment method
Caution: Using ‘power on’ button of the control R/C power on
TV.
3-1. Download MAC Address,
CI+ Key and widevine Key.
* Connect TV SET and PC which download keys Writing
program by RS232C-Cable
(1) Start Program and Click ‘start’ Button to connect TV and
PC.
(2) When download succeed, you can see “OK” on the
screen.
* Each Chassis has it’ own MAC Address. Please be careful of
download.
3-2. ADC Adjustment
O Auto-control adjustment protocol(RS-232C)
(1) Adjustment of RGB
1) Convert to PC in Input-source.
2) Signal equipment displays Output Voltage: 700 mVp-p
Impress Resolution FHD (1920 x 1080 @ 60Hz)
Model : 225 in Pattern Generator Pattern : 65 in Pattern Generator
(MSPG-925 SERISE)
3) Adjust by commanding AUTO_COLOR_ADJUST
Order Command Set response
1. Inter the aa 00 00 a 00 OK00x Adjustment mode
2. Change the XB 00 40 b 00 OK40x (Adjust 480i Comp1 ) Source XB 00 60 (Adjust 1080p Comp1)
b 00 OK60x (Adjust 1080p RGB)
3. Start ad 00 10 Adjustment
4. Return the OKx ( Success condition ) Response NGx ( Failed condition )
5. Read data ( main ) (main : component1 480i, RGB 1080p) Adjustment ad 00 20 00000000000000000000000007c007b006dx data ( main ) (main : component1 480i, RGB 1080p)
ad 00 30 000000070000000000000000007c00830077x
6. Confirm ad 00 99 NG 03 00x (Failed condition) Adjustment NG 03 01x (Failed condition)
NG 03 02x (Failed condition) OK 03 03x (Success condition)
7. End of ad 00 90 d 00 OK90x Adjustment
(2) COMPONENT input ADC
V Convert to Component in Input-source. V Signal equipment displays
Impress Resolution 480i
MODEL: 209 in Pattern Generator(480i Mode) PATTERN : 65 in Pattern Generator
(MSPG-925 SERISE)
Impress Resolution 1080i
MODEL: 225 in Pattern Generator(1080P Mode) PATTERN: 65 in Pattern Generator
(MSPG-925 SERISE)
3-3. DFT Process.
* Depend on situation, Step can be changed.
3-4. Insert Tool OPTION
and Model Name download.
(1) Press IN_START key on R/C to insert Tool OPTION (2) On the “ Tool Option ”, Insert Tool Option by a number key (3) Press the ENTER(
V)
(4) Press ENTER(
V) again.
(5) Select “OK to Download” by using
F/G(VOL +/-) and press
G(VOL +)
3-5. EDID(The Extended Display
Identification Data) download
(1) Press the ADJ KEY on R/C and enter EZ ADJUST. (2) Select “5.EDID D/L” by using
D/E(CH +/-) and press
ENTER(
V).
(3) Select “Start” and press navigation key(
G).
(4) EDID download is executed automatically. (5) Press EXIT key on R/C
* Caution
- Never connect HDMI & D-sub Cable when the user
download EDID .
- 7 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
Model Name PZ950S/G PZ750S/G PZ570S/G
Tool Option 1 50 INCH 32777 32793 32809
60 INCH 32781 32797 32813
Tool Option 2 50 INCH 65 130 195
60 INCH 65 130 195
Tool option 3 19807 19807 19807
Tool option 4 8016 8016 8016
Tool option 5 14921 14921 14920
Tool option 6 857 857 857
No STEP
1 DFT Mode-In
2 Tool Option Write
3 AREA Option Write
4 [RF]RF CHECK
5 [RF]<DTV>EYE
6 [COMP1]Color Test
7 [RGB]Color Test
8 Version Check
9 Wireless Check
10 Motion Check
11 CI Card detect Check
12 CI Key Check
13 EDID Write
14 [AV2]Color Test
15 KEY1 Test
16 KEY2 Test
17 [HDMI1]Color Test
18 [HDMI2]Color Test
19 [HDMI3]Color Test
20 [HDMI4]Color Test
21 [TV]USB2 Audio Test
22 SPDIF OUT Audio Test
23 [AV1]Color Test
24 [TV]<AV1-OUT>Color Test
25 [AV1]Scart_RGB Color Test
26 [TV]USB1 Audio Test
27 LAN Port Check
28 3D Check
- 8 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
* EDID DATA
(1) RGB
(2) HDMI
3-6. Confirmation
(1) Press ‘InStart’ Key on Factory SVC Remote Controller.
And MUST check ADC & EDID ADJ status is OK.
4. SET assembly adjustment method
* Caution : Each PCB assembly must be checked by check JIG
set. (Because power PCB Assembly damages to PDP Module, especially be careful)
4-1.POWER PCB Assembly Voltage
adjustment (Va/Vs Voltage Adjustment)
Test equipment : D.M.M 1EA Connection Diagram for Measuring : refer to fig.4 Adjustment method
(1) Va adjustment
1) Connect + terminal of D. M.M. to Va pin of P811, connect -terminal to GND pin of P811.
2) After turning VR901,voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top (deviation; ±0.5V)
(2) Vs adjustment
1) Connect + terminal of D. M..M. to Vs pin of P811, connect -terminal to GND pin of P811.
2) After turning VR951, voltage of D.M.M adjustment as same as Vs voltage which on label of panel right/top ( deviation ; ±0.5V)
4-2. Download Serial number (RS-232C)
V Press “Power on” key of service R/C.
(Baud rate : 115200 bps)
V Connect RS232 Signal Cable to RS-232 Jack. V Write Serial number by use RS-232. V Must check the serial number at the Diagnostics of SET UP
menu. (Refer to below ‘6.SET INFORMATION’).
4-3. Adjustment of White Balance
Required Equipment
O Remote controller for adjustment O Color Analyzer ( CS-1000, CA-100,100+,CA-210 or same
produc: CH 10 (PDP)
* Please adjust CA-210, CA-100+ by CS-1000 before
measuring
O Auto W/B adjustment instrument(only for Auto adjustment) O 9 Pin D-Sub Jack(RS232C) is connected to the AUTO W/B
EQUIPMENT.
Before Adjust of White Balance, Please press POWER ONLY key
Adjust Process will start by execute RS232C Command.
O Color temperature standards according to CSM and Module
O CS-1000/CA-100+/CA-210(CH 10) White balance
adjustment coordinates and color temperature.
* Manual W/B process (using adjusts Remote control)
Please Adjust in AV 1 MODE, Turn off Energy Saving Mode.
(1) Enter ‘PICTURE RESET’ on Picture Mode, then turn off
Fresh Contrast and Fresh colour in Advanced Control (2) After enter Service Mode by pushing “ADJ” key, (3) Enter White Pattern off of service mode, and change off ->
on. (4) Enter “W/B ADJUST” by pushing “
G” key at “3. W/B
ADJUST”.
* Gain Max Value is 192. So, Never make any Gain Value over
192 and please fix one Value on 192, between R, G and B.
CSM PLASMA
Cool 11000K
Medium 9300K
Warm 6500K
CSM
Color Coordinate
Temp ±Color Coordinate
xy
Cool 0.276 0.283 11000K 0.002
Medium 0.285 0.293 9300K 0.002
Warm 0.313 0.329 6500K 0.002
Min Tpy Max
R-GAIN 0 192 192
G-GAIN 0 192 192
B-GAIN 0 192 192
- 9 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
* Auto-control interface and directions
(1) Adjust in the place where the influx of light like floodlight
around is blocked. (Illumination is less than 10ux).
(2) Measure and adjust after sticking the Color Analyzer (CA-
100+, CA210 ) to the side of the module.
(3) Aging time
After aging start, keep the Power on (no suspension of power supply) and heat-run over 5 minutes
4-4. Serial number download & Model
name D/L and Check Tool Option.
(1) Press "Power on" button of a service R/C.(Baud rate :
115200 bps)
(2) Connect RS232-C Signal Cable and start ‘Option Check
Program Ver3.8’ (3) Scan serial Number and press ‘F5’ button. (4) Check ‘OK’ on program (1) program. (5) Press ‘In start’ button on SVC R/C, check Serial Number
and Model Name.
4-5. Check Tool Option and write Country
Group & Area Code(Option) D/L
4-6. Checking the EYE-Q Operation.
(1) Press the EYE Key on the adjustment remote controller. (2) Check the Sensor DATA ( It must be under 10) and keep
the data longer than 1.5s
(3) Check ‘OK’
(Sensor DATA 0 ~ 4095, Power Saving Mode 0 ~ 12) * IF you press IN-STAP Button, change Green Eye-check OSD.
4-7. Ping TEST
* This test is to check Network operation.
(1) Equipment Setting
1) Play the LAN Port Test PROGRAM.
2) Input IP set up for an inspection to Test *IP Number : 12.12.2.2
(2) LAN PORT inspection (PING TEST)
* In this case Network setting is on Manual Setting.
1) Play the LAN Port Test Program.
2) connect each other LAN Port Jack.
3) Play Test (F9) button and confirm OK Message.
4) remove LAN CABLE
(3) Check Wireless function.
1) Connect set and Dongle of Wireless to Cable of HDMI & TTA 20Pin
2) At OSD of SET, check the message like Fig 3.
3) Detach Cable of Wireless Dongle
Model Name PZ950S/G PZ750S/G PZ570S/G
Tool Option 1 50 INCH 32777 32793 32809
60 INCH 32781 32797 32813
Tool Option 2 50 INCH 65 130 195
60 INCH 65 130 195
Tool option 3 19807 19807 19807
Tool option 4 8016 8016 8016
Tool option 5 14921 14921 14920
Tool option 6 857 857 857
Area option / Code 0 0 0
- 10 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
4-8. Magic Motion Remote Controller test
Required Equipment
- RF Remote Controller for test, IR-KEY-Code Remote Controller for test
* You must confirm the battery power of Remote Controller
before test
(Recommend that change the battery per every lot)
(1) If you select the ‘start key(Mute)’ on the controller, you can
pairing with the TV SET.
(2) You can check the cursor on the TV Screen, when select
the ‘OK Key’ on the controller
(3) You must remove the pairing with the TV Set by select
‘Vol+(STOP) Key’ on the controller
4-9. 3D Function Test
Required Equipment
O Pattern Generator : MSHG-600, MSPG-6100 [SUPPORT
HDMI1.4]) MODE : HDMI mode NO. 872 Pattern No.83
(1) Please input 3D test pattern like below (HDMI mode NO.
872 , pattern No.83)
(2) When 3D OSD appear automatically, then press OK button
on ADJ Remote Controller.
(3) Check the picture. The picture must be same as below.
(Don’t have to wear 3D glasses.)
4-10. Check RF Emitter.
Required Equipment
- Pattern Generator : 3D-GT002, MSHG-600, MSPG-6100 [SUPPORT HDMI1.4]) MODE : HDMI mode NO. 872 Pattern No.83
(1) On 3D Mode, Check the picture like below.
(2) If RF Emitter is correctly working, you can see that the
lamp of RF tester turns on.
5. Set Information (Serial No & Model name)
5-1. Check the serial number
& Model Name
(1) Push the menu button in DTV mode. (2) Check the Serial Number
Select the STATION -> Diagnostics -> To set
6. SW Download Guide.
* Put a *.bin to USB Stick and Turn on TV
(1) Put the USB Stick to the USB socket (2) Automatically detecting update file in USB Stick
* If your downloaded program version in USB Stick is Low,
it didn’t work. But your downloaded version is High, USB data is automatically detecting.
(3) Show the message “Copying files from memory” (4) Updating is staring. (5) Updating Completed, The TV will restart automatically.
After turn on TV, Please press ‘IN-STOP’ button on ADJ Remote-control. * IF you don’t have ADJ R/C, enter ‘Factory Reset’ in
OPTION MENU.
(6) When TV turn on, check the Updated version on
Diagnostics MENU.
- 11 -
LGE Internal Use OnlyCopyright ©2011 LG Electronics Inc. All rights reserved.
Only for training and service purposes
BLOCK DIAGRAM
- 12 -
LGE Internal Use Only
EXPLODED VIEW
303
209
208
400
580
201
601
200
300
301
207
304
202
302
203
240
604
520
602
501
590
204
205
206
120
910
570
540
560
900
305
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.
IMPORTANT SAFETY NOTICE
LV1
A12
A2
A23
A4
A24
A13
A10
A9
NAND FLASH MEMORY 8Gbit
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
R107 2.7K
Open Drain
NAND_RBb
NAND_REb
NAND_CEb
NAND_CEb2
NAND_CLE
NAND_ALE
NAND_WEb
Write Protection
- High : Normal Operation
- Low : Write Protection
FLASH_WP
R149
+3.3V_Normal
R103
4.7K
+3.3V_Normal
OPT
0
R133
OPT
0
4700pF
C102
0.1uF
OPT
NC_1
NC_2
NC_3
NC_4
NC_5
NC_6
NC_7
NC_8
VCC_1
VSS_1
NC_9
NC_10
NC_11
NC_12
NC_13
NC_14
NC_15
R/B
CLE
ALE
RE
CE
WE
WP
K9F8G08U0M-PCB0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
IC102
SS-NAND
Boot ROM Device Select - (FA4,FAD7,FAD2,FAD1)
IC102-*1
TC58DVG3S0ETA00
NC_29
48
NC_28
47
NC_27
46
NC_26
45
I/O7
44
NAND_DATA[7]
I/O6
43
NAND_DATA[6]
I/O5
42
NAND_DATA[5]
I/O4
41
NAND_DATA[4]
NC_25
40
NC_24
39
NC_23
38
VCC_2
37
VSS_2
36
NC_22
35
NC_21
34
NC_20
33
I/O3
32
I/O2
31
I/O1
30
I/O0
29
NC_19
28
NC_18
27
NC_17
26
NC_16
25
OPT
R148
+3.3V_NormalC101
C104 10uF
NAND_DATA[3]
NAND_DATA[2]
NAND_DATA[1]
NAND_DATA[0]
0
C103
0.1uF
NAND_DATA[0-7]
10V
NC_1
NC_2
NC_3
NC_4
NC_5
NC_6
RY/BY
NC_7
NC_8
VCC_1
VSS_1
NC_9
NC_10
NC_11
NC_12
NC_13
NC_14
NC_15
1
TOSIBA-NAND
2
3
4
5
6
7
RE
8
CE
9
10
11
12
13
14
15
CLE
16
ALE
17
WE
18
WP
19
20
21
22
23
24
NC_28
48
NC_27
47
NC_26
46
NC_25
45
I/O8
44
I/O7
43
I/O6
42
I/O5
41
NC_24
40
PSL
39
NC_23
38
VCC_2
37
VSS_2
36
NC_22
35
NC_21
34
NC_20
33
I/O4
32
I/O3
31
I/O2
30
I/O1
29
NC_19
28
NC_18
27
NC_17
26
NC_16
25
+3.3V_Normal
R117 10K OPT
R118 10K
R122 10K
R123 10K
OPT
R113 10K
R114 10K
OPT
NAND ECC (FA3, FA2, FALE)
+3.3V_Normal
R115 10K
R116 10K OPT
R119 10K OPT
R120 10K
R111 10K
OPT
R112 10K
R127 10K OPT
R128 10K
CI_ADDR[4] NAND_DATA[7] NAND_DATA[2] NAND_DATA[1]
CI_ADDR[3] CI_ADDR[2] NAND_ALE
0000: ST Micro M25P or compatible Serial Flash 0010: 8-bit 512Mbit 512B page SLC NAND Flash devices 0100: 8-bit 128, 256Mbit 512B page SLC NAND Flash devices 0110: 8-bit 1Gbit 2KB page SLC NAND Flash devices 1000: 8-bit 2Gbit, 4Gbit, 8Gbit 2KB page SLC NAND Flash devices 1010: 8-bit 16Gbit, 32Gbit 4KB page SLC NAND Flash devices (O) 0001: 8-bit 8/16/32Gbit 2KB page MLC NAND Flash devices 0011: 8-bit 16/32Gbit 4KB page MLC NAND Flash devices 0101: 8-bit 32Gbit 8KB page MLC NAND Flash devices 0111: 3B dual IO Serial Flash 1001: BB dual IO Serial Flash 1011: fast Serail Flash > 50Mhz 1100: OneNAND Flash (always 16-bit) 1110: Reserved 1101, 1111: Reserved
000 = ECC disabled 001 = ECC 1-bit repair 010 = ECC 4-bit BCH (O) 011 = ECC 8-bit BCH, 27 byte spare 100 = ECC 12-bit BCH, 27 byte spare 101 = ECC 8-bit BCH, 16 byte spare 110, 111 = Reservedd
Strap Setting
+3.3V_Normal
R154 10K
OPT
R155 10K
NAND_DATA[0]: 0: System is LITTLE endian (O) 1: System is BIG endian
CI_ADDR[7]: 0: Disable EDID automatic Downloading from Flash (O) 1: Enable EDID automatic Downloading from Flash
NAND_DATA[6] : 0: Disable OSC clock output on chip Pin (O) 1: Enable OSC clock output on chip pin.
CI_ADDR[6]: 0: Host MIPS run at 500 MHz (O) 1: Host MIPS run at 250 MHz
NAND_CLE: 0: Differential Oscillators TVM not bypassed (O) 1: Differential Oscillators TVM bypassed
NAND_DATA[4]: 0: 27MHz TVM Crystal Frequency 1: 54MHz TVM Crystal Frequency (O)
R157 10K
OPT
R158 10K
R160 10K
OPT
R161 10K
R164 10K
OPT
R165 10K
R167
R170
R175
R177
R179
R181
R183
10K
10K
10K
10K
10K
OPT
R168 10K
OPT
R171
R176
10K OPT
CI_ADDR[9],CI_ADDR[11],CI_ADDR[12],CI_ADDR[13] TVM Crystal oscillator bias/gain control 0000: 210uA 0001: 390uA 0010: 570uA 0011: 730uA 0100: 890uA (O) 0111: 1290uA 1000: 1416uA 1111: 2196uA 0101, 0110, 1001, 1010, 1011, 1100, 1101, 1110: Reserved
CI_ADDR[8]: 0: RESETOUTb (in On/Off only) stay asserted until software releases them. 1: Fix amount of delay for de-assertion on RESETOUTb (in On/IOff only) at end of RESETb pulse (O)
NAND_DATA[3]: 0: MIPS will boot from external flash (O) 1: MIPS will boot from ROM
NAND_DATA[5]: 0: FLASH MODE 1: BSC_SLAVE(BBS) MODE (O)
R178
10K
10K OPT
OPT
R180 10K
10K OPT
R182 10K
10K
R184 10K
OPT
R187 10K
OPT
R188 10K
R192 10K
OPT
R193 10K
NAND_DATA[0] CI_ADDR[7] NAND_DATA[6] CI_ADDR[6] NAND_CLE NAND_DATA[4] CI_ADDR[9] CI_ADDR[11] CI_ADDR[12] CI_ADDR[13] CI_ADDR[8] NAND_DATA[3] NAND_DATA[5]
+5V_MAIN
4.7K
R101
+3.3V_Normal
R102
4.7K
R105
4.7K
R104
4.7K
HDMI_CLK­HDMI_CLK+
HDMI_RX0­HDMI_RX0+
HDMI_RX1­HDMI_RX1+
HDMI_RX2­HDMI_RX2+
HDMI_ARC
LGE35230(BCM35230KFSBG)
B5 C5
A4 B4
A3 B3
A2 B2
W2
V4 W4
V3 V2
D13
E6
R106 3K
IC101
NON_BCM_CAP
HDMI0_CLKN HDMI0_CLKP
HDMI0_D0N HDMI0_D0P
HDMI0_D1N HDMI0_D1P
HDMI0_D2N HDMI0_D2P
CEC
DDC0_SCL DDC0_SDA
HDMI0_HTPLG_IN HDMI0_HTPLG_OUT
HDMI0_ARC HDMI0_RESREF
LT0VCAL_MONITOR
TXOUT0_L0N TXOUT0_L0P TXOUT0_L1N TXOUT0_L1P TXOUT0_L2N TXOUT0_L2P
TXCLK_LN
TXCLK_LP TXOUT0_L3N TXOUT0_L3P TXOUT0_L4N TXOUT0_L4P
TXOUT0_U0N TXOUT0_U0P TXOUT0_U1N TXOUT0_U1P TXOUT0_U2N TXOUT0_U2P
TXCLK_UN
TXCLK_UP TXOUT0_U3N TXOUT0_U3P TXOUT0_U4N TXOUT0_U4P
TXOUT1_L0N TXOUT1_L0P TXOUT1_L1N TXOUT1_L1P TXOUT1_L2N TXOUT1_L2P
TXCLK1_LN
TXCLK1_LP TXOUT1_L3N TXOUT1_L3P TXOUT1_L4N TXOUT1_L4P
TXOUT1_U0N TXOUT1_U0P TXOUT1_U1N TXOUT1_U1P TXOUT1_U2N TXOUT1_U2P
TXCLK1_UN
TXCLK1_UP TXOUT1_U3N TXOUT1_U3P TXOUT1_U4N TXOUT1_U4P
GPIO_BL_ON
BL_PWM/GPIO
AE27 AE28 AF27 AF28 AG27 AG28 AE26 AF26 AH27 AG26 AF25 AE25
AH26 AG25 AE24 AD24 AH25 AF24 AE23 AD23 AG24 AF23 AC22 AD22
AG23 AH23 AE22 AE21 AF22 AH22 AG22 AF21 AG21 AF20 AD21 AC21
AG20 AH20 AD19 AE19 AF19 AH19 AE18 AD18 AG19 AF18 AG18 AF17
AC18 AH16 AG16
TXA0N TXA0P TXA1N TXA1P TXA2N TXA2P TXACLKN TXACLKP TXA3N TXA3P TXA4N TXA4P
TXB0N TXB0P TXB1N TXB1P TXB2N TXB2P TXBCLKN TXBCLKP TXB3N TXB3P TXB4N TXB4P
RGB_DDC_SDA
RGB_DDC_SCL
DEBUG
P101
TJC2508-4A
+3.3V_Normal
VCC
1
SCL
2
SDA
3
GND
4
SBD
Q100
G
BSS83
SBD
Q101
G
BSS83
BBS CONNECT
C106
R109
4.7uF
1.5K
+3.3V_Normal
R198 10K
C118
0.1uF 16V
+3.3V_Normal
R196 10K
C119
0.1uF 16V
R110
1.5K
5V_HDMI_3
FOR HDMI STANDARD APPLY ONLY WHEN CONNECT TO PULL-UP GPIO
R130 2K
R19522
R19722
SDA0_3.3V SCL0_3.3V
SCL2_3.3V SDA2_3.3V
5V_HDMI_1
5V_HDMI_2
5V_HDMI_4
+3.3V_Normal
R121
2.2K
OPT
C107 33pF 50V
+3.3V_Normal
+3.3V_Normal
OPT
R124 1K
OPT
R125 1K
R126
2.2K
C108 33pF 50V
54MHz_XTAL_P
54MHz_XTAL_N
R131
R129
2K
2K
OPT
OPT
C110
C109
33pF
33pF
50V
50V
PCM_5V_CTL
R142 22 R143 22
R144 22 R145 22
R132 4.7K
SOC_RESET
+3.3V_Normal
C111 0.01uF C112 0.1uF
BCM REFRENCE is 562ohm
LNB_INT
SC_ID
BCM_RX BCM_TX
R135 R136 33
R137 33
R138 33
+3.3V_Normal
R141 4.7K
OPT OPT
OPT OPT
JRST
LGE35230(BCM35230KFSBG)
AG6
AF6
V5
AB4
Y4
AA4
Y5
AB2 AB5
U3 U2
Y2 Y1
33
AA3 AA2
H3 H2
H4 H5
F25
W5
U5 U4
W3 W1
AB6
Y6
OPT
R139 0
Y3
G24
J6 W6
F7 E7
R140 560 1%
IC101
NON_BCM_CAP
TVM_XTALIN
TVM_XTALOUT
IRRXDA
FP_IN0 FP_IN1
SPARE_ADC1 SPARE_ADC2
FS_IN1 FS_IN2
VGA_SDA VGA_SCL
RDA TDA
BSCDATAA BSCCLKA
RDB/GPIO TDB/GPIO
BSC_S_SCL BSC_S_SDA
NMIB
POWER_CTRL
AON_HSYNC AON_VSYNC
AON_GPIO_36 AON_GPIO_37
AON_RESETOUTB TVM_BYPASS
RESETB RESETOUTB
TMODE TESTEN
VDAC_VREG VDAC_RBIAS
FAD_7 FAD_6 FAD_5 FAD_4 FAD_3 FAD_2 FAD_1 FAD_0
FALE FCEB_0 FCEB_1 FCEB_2 FCEB_3
NFWPB
FRDYB
FA_0
FA_1
FA_2
FA_3
FA_4
FA_5
FA_6
FA_7
FA_8
FA_9
FA_10 FA_11 FA_12 FA_13 FA_14 FA_15
TRSTB
TDI/GPIO
TMS/GPIO TCK/GPIO
DINT/GPIO
AVS_VFB AVS_VSENSE AVS_RESETB
AVS_NDRIVE_1 AVS_PDRIVE_1
VDAC_1 VDAC_2
FWE FRD
TDO
AB1 AB3 AC1 AC2 AC3 AD2 AD3 AE2
AG1 AF1 AC5 AE6 AG5
AF3 AG2 AE3 AA5
AF2 AE1 AC4 AD5 AD4 AE4 AE5 AD6 AH3 AF4 AH4 AG4 AF5 AG3 AH2 AH5
R146 10K
AD15 AF14 AH14 AD14 AG14 AC16
AH7 AG7 AD7 AF7 AH8
C6 D7
NAND_DATA[7] NAND_DATA[6] NAND_DATA[5] NAND_DATA[4] NAND_DATA[3] NAND_DATA[2] NAND_DATA[1] NAND_DATA[0]
NAND_ALE NAND_CEb NAND_CEb2 /CI_CE1 /CI_CE2
FLASH_WP NAND_WEb NAND_REb /PCM_WAIT
NAND_CLE NAND_RBb
CI_ADDR[2] CI_ADDR[3] CI_ADDR[4] CI_ADDR[5] CI_ADDR[6] CI_ADDR[7] CI_ADDR[8]
CI_ADDR[9] CI_ADDR[10] CI_ADDR[11] CI_ADDR[12] CI_ADDR[13] CI_ADDR[14]
STRAP_PCI
NAND_DATA[0-7]
R147 1K
DTV/MNT_V_OUT
CI_ADDR[2-14]
+3.3V_Normal
R150 1K
R153 1K
R1561KR159
JRST
FOR ATMEL_EEPROM
NVRAM
8
7
6
5
SUNNY
X101
54MHz
GND_1
VCC
WP
SCL
SDA
C116
0.1uF
2
GND_1
1
X-TAL_1
KDS
X101-*1
54MHz
1
2
+3.3V_Normal
C115 8pF OPT
GND_2
4
X-TAL_2
3
C117 8pF OPT
+3.3V_Normal
FOR ST_EEPROM
IC103
M24M01-HRMN6TP
OPT
4.7K
4.7K
R173
R199
R169 0
0
R172
4.7K
R174
NC
1
E1
2
A8’h
E2
3
VSS
OPT
4
FOR ATMEL_EEPROM
54MHz X-TAL
C113 12pF
3
X-TAL_2
4
GND_2
C114 12pF
X-TAL_1
R162
R166
1K
1K
R163 1K
1K
TP122 TP123 TP124 TP118 TP119 TP120 TP121 TP125
IC103-*1
AT24C256C-SSHL-T
A0
1
8
A1
2
7
A2
3
6
GND
4
5
Write Protection
- Low : Normal Operation
- High : Write Protection
R190 33
R191 33
R189 1M OPT
54MHz_XTAL_N
54MHz_XTAL_P
VCC
WP
SCL
SDA
SCL3_3.3V
SDA3_3.3V
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
MAIN & NAND FLASH
1
19
+3.3V_Normal
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
MODEL OPTION
MODEL_OPT_0
MODEL_OPT_1
MODEL_OPT_6
MODEL_OPT_7
FE_TS_DATA[0-7]
+3.3V_Normal
R2501KOPT
R2511KOPT
R2601KR261
NO_FRC
0
0
DDR speed
T2 Tuner1SupportMODEL_OPT_5
S Tuner
R2891KDVR
R2901KMOTION
R2911KNON_DVR
R2921KNON_MOTION
1K
BCM internal FRC
0
HIGH
1333MODEL_OPT_4
Support
EnablePHM
PCM_TS_DATA[0-7]
R2011KFHD
R2191KHD
R2931KOPT
R294
1K
R2241KNVR_1M
R2541KDDR_1333
R2641KDDR_1600
R2291KNVR_256K
LG FRC2
1
0
LOW
1600
Not Support
Not Support
Disable
C2005
FE_TS_DATA[0] FE_TS_DATA[1] FE_TS_DATA[2] FE_TS_DATA[3] FE_TS_DATA[4] FE_TS_DATA[5] FE_TS_DATA[6] FE_TS_DATA[7]
PCM_MDI[0-7]
R2951KOPT
R296
1K
external URSA5
C2001
OPT
R2551KT2
R2651KNON_T2
1
1
C201 100pF
C2002
OPT
OPT
F/NIM
R202 0
F/NIM
R203 0
F/NIM
R204 0
F/NIM
R205 0
F/NIM
R206 0
F/NIM
R207 0
F/NIM
R208 0
F/NIM
R209 0
R2561KS
R2661KNON_S
R211
6.04K
R210
4.87K 1%
OPT
PCM_TS_DATA[0] PCM_TS_DATA[1] PCM_TS_DATA[2] PCM_TS_DATA[3] PCM_TS_DATA[4] PCM_TS_DATA[5] PCM_TS_DATA[6] PCM_TS_DATA[7]
PCM_MDI[0] PCM_MDI[1] PCM_MDI[2] PCM_MDI[3] PCM_MDI[4] PCM_MDI[5] PCM_MDI[6] PCM_MDI[7]
PDP_MODEL_OPT_2 PDP_MODEL_OPT_3
PDP_MODEL_OPT_0
PDP_MODEL_OPT_1
PDP_MODEL_OPT_2
PDP_MODEL_OPT_3
R2571KMHP
R2671KNOT_MHP
EPHY_TDP EPHY_TDN EPHY_RDP EPHY_RDN
USB_DM2 USB_DP2
/USB_OCD2
USB_CTL2
USB_DM1 USB_DP1
/USB_OCD1
USB_CTL1
PCM_TS_CLK
PCM_TS_SYNC PCM_TS_VAL
TS_CLK
TS_SYNC TS_VAL
PCM_MICLK
PCM_MISYNC PCM_MIVAL
/PCM_IRQA
MODEL_OPT_0
MODEL_OPT_1
MODEL_OPT_2
MODEL_OPT_3
MODEL_OPT_4
MODEL_OPT_5
MODEL_OPT_6
MODEL_OPT_7
0
MODEL_OPT_0
MODEL_OPT_1
MODEL_OPT_2
MODEL_OPT_3 REMOTE_SW_CTRL
R287
R288
MODEL_OPT_0
MODEL_OPT_1 MOTION R/C
MODEL_OPT_2
MODEL_OPT_3
R286
R285 0
R220 0
R230 0
LGE35230(BCM35230KFSBG)
F26
EPHY_VREF
D26
EPHY_RDAC
F27
EPHY_TDP
F28
EPHY_TDN
E27
EPHY_RDP
E26
EPHY_RDN
F5
USB_MONCDR
E5
USB_RREF
C2
USB_PORT1DN
D1
USB_PORT1DP
E1
USB_PWRFLT_1/GPIO
D2
USB_PWRON_1/GPIO
B1
USB_PORT2DN
C1
USB_PORT2DP
C3
USB_PWRFLT_2/GPIO
C4
USB_PWRON_2/GPIO
M4
TCLKA/GPIO
L5
TDATA_0/GPIO
M5
TDATA_1/GPIO
L6
TDATA_2/GPIO
N3
TDATA_3/GPIO
N1
TDATA_4/GPIO
N2
TDATA_5/GPIO
M3
TDATA_6/GPIO
M2
TDATA_7/GPIO
L4
TSTRTA/GPIO
N4
TVLDA/GPIO
K6
TCLKD/GPIO
J4
TDATD_0/GPIO
K5
TDATD_1/GPIO
J2
TDATD_2/GPIO
J3
TDATD_3/GPIO
K2
TDATD_4/GPIO
K1
TDATD_5/GPIO
K3
TDATD_6/GPIO
L1
TDATD_7/GPIO
L3
TSTRTD/GPIO
L2
TVLDD/GPIO
P4
MPEG_CLK/GPIO
T2
MPEG_D_0/GPIO
R3
MPEG_D_1/GPIO
R2
MPEG_D_2/GPIO
P3
MPEG_D_3/GPIO
P2
MPEG_D_4/GPIO
P1
MPEG_D_5/GPIO
R6
MPEG_D_6/GPIO
N5
MPEG_D_7/GPIO
T4
MPEG_SYNC/GPIO
P5
MPEG_DATA_EN/GPIO
0
R4
MCIF_RESET/GPIO
0
U1
MCIF_SCLK/GPIO
T3
MCIF_SCTL/GPIO
T1
MCIF_SDI/GPIO
T5
MCIF_SDO/GPIO
DVR READY
RF_BOOSTER_CTL
LG8300_RESET
/CI_CD2
IC101
NON_BCM_CAP
PCI_AD09/GPIO PCI_AD10/GPIO PCI_AD11/GPIO PCI_AD12/GPIO PCI_AD13/GPIO PCI_AD14/GPIO PCI_AD15/GPIO PCI_AD16/GPIO PCI_AD17/GPIO PCI_AD18/GPIO PCI_AD19/GPIO PCI_AD20/GPIO PCI_AD21/GPIO
PCI_CBE01/GPIO PCI_CBE02/GPIO
PCI_DEVSELB/GPIO
PCI_FRAMEB/GPIO
PCI_IRDYB/GPIO
PCI_PAR/GPIO
PCI_PERRB/GPIO
PCI_SERRB/GPIO PCI_STOPB/GPIO PCI_TRDYB/GPIO
HIGH LOW
Not SupportSupport
Not Support
Support
VI_IFP0 VI_IFM0
VDDR_AGC
AGC_SDM_2 AGC_SDM_1
GPIO_0 GPIO_1 GPIO_2 GPIO_3
PCI_VIO_0 PCI_VIO_1 PCI_VIO_2
GPIO_4 GPIO_5 GPIO_6
GPIO_7 GPIO_70 GPIO_71 GPIO_72 GPIO_73 GPIO_74 GPIO_75 GPIO_76 GPIO_77 GPIO_78 GPIO_79
PCI_AD05 PCI_AD06 PCI_AD07 PCI_AD08
PCI_AD22 PCI_AD23 PCI_AD24 PCI_AD25
PCI_CBE00
PCI_CBE03
PCI_REQ1B
C17 B17 D15
B16 A16
A15 C16 G28 G26
+3.3V_Normal
W14 W15 W13
J5 R5 V6 H6 AE15 AF15 AG15 AF16 AD16 AE16 AG17 AH17 AE17 AD17
AB13 AC15 AB12 AB11 AE14 AG13 AH13 AF13 AE13 AD12 AF12 AG10 AF10 AE10 AD10 AE9 AE8 AC10 AC11 AC8 AB8
AC14 AG12 AH10 AB7
AG11 AD11 AE11 AD13 AE12 AC12 AC13 AH11 AF11
R212 1K
closed to soc
R213 2K
R280 22
R214 22
R215 22
R216 22
R241 22 R242 22 R243 22 R244 22
R228 22
R217 0
R218 22
R221 0 R222 0
R283 22
R223 22
R236 0
R235
OPT
R225 22
OPT
R226 22
R247 22
R227 22
close to soc
C217
16V
0.1uF
H_NIM
C218
0.1uF
H_NIM
16V
H_NIM
H_NIM
C216 0.01uF
REMOTE_OR_MODULE_RX
MODEL_OPT_0
CI_DET
EPHY_ACTIVITY EPHY_LINK
DTV_ATV_SELECT
OPT
OPT
OPT
OPT
OPT
DC_MREMOTE
DD_MREMOTE OPT OPT
0
C203 10uF
H_NIM
100
R246
H_NIM
100
R245
IF_AGC_MAIN
H_NIM
MODEL_OPT_1
/CI_CD2
L/R_INDICATOR
3D_GPIO_0 MODEL_OPT_6 MODEL_OPT_7 PDP_MODEL_OPT_0 PDP_MODEL_OPT_1
3D_GPIO_1 3D_GPIO_2
C205
C207
10uF
4.7uF
IF_P_MAIN
IF_N_MAIN
R231 33 R232 33
R240 100
/CI_CD1
REMOTE_SW_CTRL
SC/COMP2_DET
AMP_RESET_N
AV2_SIDE_CVBS_DET
DSUB_DET
PCM_RST MODEL_OPT_4
COMP_DET MODEL_OPT_5
NFM18PS105R0J
OUTIN
C238
C236
4.7uF
0.1uF
C215
C213
0.01uF
0.1uF
L201
BLM18PG121SN1D
C229
0.1uF
SDA1_3.3V SCL1_3.3V
C204
very close to SOC R22 pin
C233
6.3V
NFM18PS105R0J
GND
C232
C234
4.7uF
0.1uF
C209
C211
4.7uF
0.1uF
+3.3V_Normal
+3.3V_Normal
R233
R234
1.2K
1.2K
C227
C231
33pF
33pF
50V
50V
OPT
OPT
M_RFModule_RESET
1. COMP_DET + COMP_AV_DET = COMPONENT
2. COMP_DET ONLY = AV COMP_AV_DET
OUTIN
GND
C244
6.3V
NFM18PS105R0J
OUTIN
GND
C225
0.22uF
6.3V
C220
0.1uF
C242
0.1uF
+3.3V_Normal
+0.9V_CORE
+3.3V_Normal
+0.9V_CORE
C221
0.1uF
+1.5V_DDR
C222
0.01uF
+1.5V_DDR
L200
MLG1005S22NJT
C247 22uF 10V
C248 10uF
C223
0.01uF
+0.9V_CORE
Place Cap Very close to L22 Ball
C206
C208
1uF
0.1uF
10V
16V
READY
READY
+3.3V_Normal
+0.9V_CORE
POWER 2.5V
+2.5V_BCM35230
+2.5V_BCM35230
+2.5V_BCM35230 VAFE3_VDD25
C250
4.7uF
LGE35230(BCM35230KFSBG)
V12
VDDC_1
V7
VDDC_2
M10
VDDC_3
N10
VDDC_4
P10
VDDC_5
R10
VDDC_6
T10
VDDC_7
U10
VDDC_8
V10
VDDC_9
W10
VDDC_10
V13
VDDC_11
L11
VDDC_12
M11
VDDC_13
N11
VDDC_14
P11
VDDC_15
R11
VDDC_16
T11
VDDC_17
U11
VDDC_18
V11
VDDC_19
W11
VDDC_20
V14
VDDC_21
L18
VDDC_22
M18
VDDC_23
N18
VDDC_24
P18
VDDC_25
R18
VDDC_26
T18
VDDC_27
U18
VDDC_28
V18
VDDC_29
W18
VDDC_30
V15
VDDC_31
L19
VDDC_32
M19
VDDC_33
N19
VDDC_34
P19
VDDC_35
R19
VDDC_36
T19
VDDC_37
U19
VDDC_38
V19
VDDC_39
W19
VDDC_40
V16
VDDC_41
V17
VDDC_42
L10
POR_VDD
L22
VDDR1_1
AA28
VDDR1_2
V28
VDDR1_3
R28
VDDR1_4
M28
VDDR1_5
J28
VDDR1_6
K23
VDDR1_7
M22
VDDR1_8
T22
VDDR1_9
T23
VDDR1_10
U22
VDDR1_11
Y22
VDDR1_12
R22
DDR_LDO_VDDO
G15
VDDR3_1
H22
VDDR3_2
G23
VDDR3_3
AB9
VDDR3_4
K7
VDDR3_5
AB15
VDDR3_6
L7
VDDR3_7
AB14
VDDR3_8
M7
VDDR3_9
N6
VDDR3_10
P6
VDDR3_11
AA6
AON_VDDC_1
AA7
AON_VDDC_2
Y7
AON_POR_VDD
U7
AON_VDDR3
T7
AON_VDDR10_1
T6
AON_VDDR10_2
L202
BLM18PG121SN1D
C249 10uF
L203
BLM18PG121SN1D
C251
0.1uF 16V
L204
BLM18PG121SN1D
IC101
NON_BCM_CAP
C253 10uF
EPHY_VDD25
C252
4.7uF
C254
4.7uF
VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8
VSS_9 VSS_10 VSS_11 VSS_12 VSS_13 VSS_14 VSS_15 VSS_16 VSS_17 VSS_18 VSS_19 VSS_20 VSS_21 VSS_22 VSS_23 VSS_24 VSS_25 VSS_26 VSS_27 VSS_28 VSS_29 VSS_30 VSS_31 VSS_32 VSS_33 VSS_34 VSS_35 VSS_36 VSS_37 VSS_38 VSS_39 VSS_40 VSS_41 VSS_42 VSS_43 VSS_44 VSS_45 VSS_46 VSS_47 VSS_48 VSS_49 VSS_50 VSS_51 VSS_52 VSS_53 VSS_54 VSS_55 VSS_56 VSS_57 VSS_58 VSS_59 VSS_60 VSS_61 VSS_62 VSS_63 VSS_64 VSS_65 VSS_66 VSS_67 VSS_68 VSS_69 VSS_70 VSS_71 VSS_72 VSS_73 VSS_74 VSS_75 VSS_76 VSS_77 VSS_78 VSS_79 VSS_80 VSS_81 VSS_82 VSS_83 VSS_84
AADC_AVDD25
C256
0.1uF 16V
C255
0.1uF 16V
C257
0.1uF 16V
*NOTE 20
Close to BCM IC
K10 K11 K12 L12 M12 N12 P12 R12 T12 U12 W12 K13 L13 M13 N13 P13 R13 T13 U13 W16 K14 L14 M14 N14 P14 R14 T14 U14 K15 L15 M15 N15 P15 R15 T15 U15 K16 L16 M16 N16 P16 R16 T16 U16 K17 L17 M17 N17 P17 R17 T17 U17 W17 K18 K19 H7 G14 AB16 R7 M6 AB23 P7 W7 J7 N7 AB10 AC23 AC6 G19 AA22 J23 J22 K22 J25 N22 N23 M25 P22 R25 V22 W22 W23 V25 AA25
+2.5V_BCM35230
L205
BLM18PG121SN1D
C258
0.1uF 16V
+2.5V_BCM35230
C259 10uF
6.3V
+2.5V_BCM35230 VAFE2_VDD25
C2007 390pF 50V
L206
BLM18PG121SN1D
+2.5V_BCM35230
C260
4.7uF 10V
BLM18PG121SN1D
C261 10uF
C265
4.7uF 10V
L207
C262 10uF
6.3V
ADAC_AVDD25
C263
C267
4.7uF
0.1uF 16V
C266
C270
4.7uF
0.1uF
10V
16V
C200
C269
390pF
0.1uF 50V
16V
READY
PLL_VAFE_AVDD25
C264
C268
4.7uF
0.1uF 16V
Close to BCM IC
+0.9V_CORE
C271
0.01uF
C272
0.01uF 50V
C2008 390pF 50V
*NOTE 20
VAFE2_VDD25
PLL_VAFE_AVDD
PLL_VAFE_AVDD25
L208
BLM18PG121SN1D
+0.9V_CORE
VDAC_AVDD33
VAFE2_DVDD
PLL_MIPS_AVDD
CORE 0.9V
+0.9V_CORE
BLM18PG121SN1D
C274 22uF 10V
BLM18PG121SN1D
BLM18PG121SN1D
POWER 3.3V
ADAC_AVDD25
EPHY_VDD25
HDMI_AVDD33
+2.5V_BCM35230
+2.5V_BCM35230
C275
0.1uF
USB_AVDD33
VAFE3_VDD25
PLL_MAIN_AVDD
C273
C276
0.1uF
0.01uF
HDMI_AVDD USB_AVDD VAFE2_DVDD
L209
L210
L211
AADC_AVDD25
HDMI_AVDD
OPT
USB_AVDD
VAFE3_DVDD
PLL_AUD_AVDD
+3.3V_Normal
OPT
+0.9V_CORE +0.9V_CORE
L214
BLM18PG121SN1D
C280
0.1uF 16V
C277
4.7uF
PLL_VAFE_AVDD
C279
4.7uF
BLM18PG121SN1D
C278
0.1uF
C284 22uF 10V
+0.9V_CORE+0.9V_CORE
L215
C2009
C282
390pF
0.1uF 50V
*NOTE 20
Close to BCM IC
C283
0.1uF 16V
+3.3V_Normal
NON_BCM_CAP
AADC_AVDD25
ADACA_AVDD25 ADACC_AVDD25 ADACD_AVDD25
EPHY_BVDD25 EPHY_AVDD25
HDMI0_AVDD HDMI0_AVDD33
LT0VDD25_1 LT0VDD25_2 LT0VDD25_3 LT0VDD25_4
SPDIF_IN_AVDD25
USB_AVDD USB_AVDD33
VDAC_AVDD33
VAFE2_DVDD VAFE2_AVDD25_1 VAFE2_AVDD25_2 VAFE2_DVDD25
VAFE3_DVDD VAFE3_AVDD25_1 VAFE3_AVDD25_2 VAFE3_AVDD25_3 VAFE3_DVDD25 POR_VDD25
PLL_AUD_AVDD PLL_MAIN_AVDD PLL_MIPS_AVDD
PLL_VAFE_AVDD PLL_VAFE_AVDD25
TVM_OSC_AVDD
AUX_AVDD33
BLM18PG121SN1D
L213
BLM18PG121SN1D
IC101
HDMI0_AVSS_1 HDMI0_AVSS_2
SPDIF_IN_AVSS
PLL_MIPS_AVSS
TVM_OSC_AVSS
C281
0.1uF
L212
LGE35230(BCM35230KFSBG)
F19
D25 D24 E24
F24 E25
D5 D4
AE20 AD20 AC20 AB20
D14
E4 D3
D6
D18 E17 D16 D17
D9 D8 E8 F9 E9 F8
G25
K4
AD25
D11 D12
AE7
U6
L219
BLM18PG121SN1D
C285
C288
4.7uF
0.1uF
10V
16V
VAFE3_DVDDPLL_AUD_AVDD PLL_MAIN_AVDD
C287
4.7uF
+3.3V_Normal+3.3V_Normal
VDAC_AVDD33
C286
4.7uF
AADC_AVSS
ADACA_AVSS ADACC_AVSS ADACD_AVSS
EPHY_AVSS
LT0VSS_1 LT0VSS_2 LT0VSS_3 LT0VSS_4 LT0VSS_5 LT0VSS_6 LT0VSS_7
USB_AVSS_1 USB_AVSS_2
VDAC_AVSS
VAFE2_VSS_1 VAFE2_VSS_2 VAFE2_VSS_3 VAFE2_VSS_4 VAFE2_VSS_5 VAFE2_VSS_6 VAFE2_VSS_7
VAFE3_VSS_1 VAFE3_VSS_2 VAFE3_VSS_3 VAFE3_VSS_4 VAFE3_VSS_5 VAFE3_VSS_6
C292 22uF 10V
C290
0.1uF 16V
*NOTE 20
Close to BCM IC
L216
BLM18PG121SN1D
C289
0.1uF 16V
F20
G22 G21 F22
F23
F6 G6
AB22 AB21 AB19 AC19 AB18 AB17 AC17
F15
G7 G8
G9
G20 E18 G18 G17 F18 G16 F16
G13 G12 F12 G11 G10 F10
AD26
AC7
+0.9V_CORE
BLM18PG121SN1D
C2006 390pF 50V
+0.9V_CORE
HDMI_AVDD33USB_AVDD33
C291
4.7uF
BLM18PG121SN1D
C296
4.7uF 10V
L217
L218
C293
0.1uF
C202
C299
390pF
0.1uF 50V
16V
READY
C294
C297
4.7uF
0.1uF
PLL_MIPS_AVDD
C295
C298
4.7uF
0.1uF
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
MAIN POWER
192
Run Along DSUB_R Trace
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
Run Along DSUB_G Trace
Run Along DSUB_B Trace
Run Along COMP_Y_IN,COMP_Pr_IN,COMP_Pb_IN Trace
Run Along SC R,G,B Trace
Run Along SC_CVBS Trace
Run Along SIDE_CVBS Trace
Run Along TUNER_CVBS Trace
SC_CVBS_IN
AV2_SIDE_CVBS_IN
TU_CVBS
COMP_Y/AV1_CVBS
DSUB_R+
DSUB_G+
DSUB_B+
COMP_Y/AV1_CVBS
COMP_Pr COMP_Pb
SC_R/COMP2_Pr
SC_G/COMP2_Y
SC_B/COMP2_Pb
C320 0.1uF C321 0.1uF
C327 0.1uF C328 0.1uF
R311
R317
36
36
C322 0.1uF C323 0.1uF
R312 36
DSUB_HSYNC DSUB_VSYNC
R318
R310
0
0
R306
R325
75
OPT
36
1%
R303 36
SC_FB
C337 0.1uF C338 0.1uF
C303 0.1uF C304 0.1uF
C325 0.1uF C326 0.1uF
R316 36
C340 0.1uF C339 0.1uF
NON_EU
NON_EU
C329 0.1uF C330 0.1uF C331 0.1uF C332 0.1uF
C333 0.1uF C334 0.1uF C335 0.1uF C336 0.1uF
LGE35230(BCM35230KFSBG)
B6 A6 C7 A7 B7 C8
C13 A13
C9 A9 B9 B8
C11 A10 B10 C10
D10 F13
A12 C12 B12 B11
E12 E14
E15 F17 E16 F14 E11
C18 B18 A18 C19 A19 B19 C20 B20
E19 D19 E10 F11
IC101
NON_BCM_CAP
VI_R VI_INCM_R VI_G VI_INCM_G VI_B VI_INCM_B
HSYNC_IN VSYNC_IN
VI_Y1 VI_PR1 VI_PB1 VI_INCM_COMP1
VI_SC_R1 VI_SC_G1 VI_SC_B1 VI_INCM_SC1
VI_FB_1/GPIO VI_FS1
VI_SC_R2 VI_SC_G2 VI_SC_B2 VI_INCM_SC2
VI_FB_2/GPIO VI_FS2
VI_L1 VI_C1_1 VI_INCM_LC1_1 VI_C1_2 VI_INCM_LC1_2
VI_CVBS1 VI_INCM_CVBS1 VI_CVBS2 VI_INCM_CVBS2 VI_CVBS3 VI_INCM_CVBS3 VI_CVBS4 VI_INCM_CVBS4
VI_SIF1_1 VI_INCM_SIF1_1 VI_SIF1_2 VI_INCM_SIF1_2
BCM35230_with_CAP_220pF
IC101-*1 LGE35230
BCM_CAP U26 R26 U27 R27 V27 P26 U25 P27 R24 N24 T25 M23 R23 N25 T24 N26 L26 H27 L27 J26 M27 G27 M26 H26 L23 H25 L24 J24 M24 H23 L25 H24
T26 P25 J27 K24
T27 T28
P24 P23
K27 K28
K25 K26
DDR_DQA_0 DDR_DQA_1 DDR_DQA_2 DDR_DQA_3 DDR_DQA_4 DDR_DQA_5 DDR_DQA_6 DDR_DQA_7 DDR_DQA_8 DDR_DQA_9 DDR_DQA_10 DDR_DQA_11 DDR_DQA_12 DDR_DQA_13 DDR_DQA_14 DDR_DQA_15 DDR_DQA_16 DDR_DQA_17 DDR_DQA_18 DDR_DQA_19 DDR_DQA_20 DDR_DQA_21 DDR_DQA_22 DDR_DQA_23 DDR_DQA_24 DDR_DQA_25 DDR_DQA_26 DDR_DQA_27 DDR_DQA_28 DDR_DQA_29 DDR_DQA_30 DDR_DQA_31
DDR_DMA_0 DDR_DMA_1 DDR_DMA_2 DDR_DMA_3
DDR_DQSA_P_0 DDR_DQSA_N_0
DDR_DQSA_P_1 DDR_DQSA_N_1
DDR_DQSA_P_2 DDR_DQSA_N_2
DDR_DQSA_P_3 DDR_DQSA_N_3
DDR_ADA_0 DDR_ADA_1 DDR_ADA_2 DDR_ADA_3
DDR_ADA_4 DDR_ADA_5 DDR_ADA_6
DDR_ADA_ALT_4 DDR_ADA_ALT_5 DDR_ADA_ALT_6
DDR_ADA_7 DDR_ADA_8
DDR_ADA_9 DDR_ADA_10 DDR_ADA_11 DDR_ADA_12 DDR_ADA_13 DDR_ADA_14
DDR_BAA_0
DDR_BAA_1
DDR_BAA_2
DDR_RASA_N DDR_CASA_N
DDR_WEA_N
DDR_CKA01_P DDR_CKA01_N
DDR_CKA23_P DDR_CKA23_N
DDR_VREFA
DDR_RST_N
V23 AB27 Y23 Y26
AB26 Y24 AC26
AB24 AC25 AC24
AB25 AD28 Y25 AA27 AC27 AA26 AA24 AD27
Y27 AB28 W24
V24 W25 V26
U24
DDR_CKEA
W27 W28
N28 N27
U23
AA23
W26
DDR_ZQ
SCL3_3.3V SDA3_3.3V
+3.3V_Normal
R301
2.2K
OPT
C301 33pF 50V
NON_BCM_CAP
SPDIF_INC_P SPDIF_INC_N
SPDIF_IND_P SPDIF_IND_N
I2SSCK_IN/GPIO I2SWS_IN I2SSD_IN/GPIO
AADC_LINE_L1 AADC_LINE_R1 AADC_INCM1
AADC_LINE_L2 AADC_LINE_R2 AADC_INCM2
AADC_LINE_L3 AADC_LINE_R3 AADC_INCM3
AADC_LINE_L4 AADC_LINE_R4 AADC_INCM4
AADC_LINE_L5 AADC_LINE_R5 AADC_INCM5
AADC_LINE_L6 AADC_LINE_R6 AADC_INCM6
AADC_LINE_L7 AADC_LINE_R7 AADC_INCM7
IC101
I2SSCK_OUTA/GPIO
I2SWS_OUTA/GPIO
I2SSD_OUTA0/GPIO
I2SSOSCK_OUTA/GPIO
I2SSD_OUTA1/GPIO I2SSD_OUTA2/GPIO
I2SSCK_OUTC/GPIO
I2SWS_OUTC/GPIO I2SSD_OUTC/GPIO
I2SSOSCK_OUTC/GPIO
I2SSCK_OUTD/GPIO
I2SWS_OUTD/GPIO I2SSD_OUTD/GPIO
I2SSOSCK_OUTD/GPIO
SPDIF_OUTA/GPIO
AUDMUTE_0/GPIO
AUDMUTE_1
ADAC_AL_N ADAC_AL_P
ADAC_AR_N ADAC_AR_P
ADAC_CL_N ADAC_CL_P
ADAC_CR_N ADAC_CR_P
ADAC_DL_N ADAC_DL_P
ADAC_DR_N ADAC_DR_P
AF8 AF9 AG9 AC9 AD8 AD9
E2 F2 E3 F3
G2 G3 G1 H1
B13
AG8 E13
C28 C27
D28 D27
C26 A27
B27 B28
B25 A25
A26 B26
R307 33 R326
AUD_SCK AUD_LRCK AUD_LRCH AUD_MASTER_CLK
33
TU_RESET
SC_RE1 SC_RE2
+3.3V_Normal
R300
1.2K
OPT
C300 33pF 50V
R304
1.2K
OPT
C317 33pF 50V
MOD_SCL MOD_SDA
S2_RESET
SPDIF_OUT
SCART_Lout_N SCART_Lout_P
SCART_Rout_N SCART_Rout_P
LGE35230(BCM35230KFSBG)
B15 C15
C14
R302
2.2K
OPT
C302 33pF 50V
REMOTE_OR_MODULE_TX
INCM_AUD_PC
INCM_AUD_SIDE_AV
INCM_AUD_COMP
INCM_AUD_SC
PC_L_IN PC_R_IN
AV2_SIDE_L_IN AV2_SIDE_R_IN
COMP_L_IN COMP_R_IN
SC/COMP2_L_IN SC/COMP2_R_IN
R308 33 R309
C305 1uF 10V C306 1uF 10V C307 1uF 10V
C308 1uF 10V C309 1uF 10V C310 1uF 10V
C311 1uF 10V C312 1uF 10V C313 1uF 10V
C314 1uF 10V C315 1uF 10V C316 1uF 10V
B14
G4 F4 G5
33
C25 B24 A24
E22 E23 D23
C24 C23 B23
E21 D21 D22
B22 C22 A22
F21 D20 E20
A21 C21 B21
Route Along With TUNER_SIF_IF_N
TU_SIF
R315 120
OPT
R305 240
C324 0.1uF
C319 0.1uF
+2.5V_BCM35230
+2.5V_BCM35230
R313 10K
R314 12K
R319 10K OPT
R320 12K OPT
Near
Near
Near
Near
JK800
JK900
JK803 JK801
R321 5.1
R322 5.1
R323 5.1
R324 5.1
AUDIO INCM
Route Between SIDE_AV_L_IN & SIDE_AV_R_IN Trace
Route Between SC_L_IN & SC_R_IN Trace
Route Between COMP_L_IN & COMP_R_IN Trace
Route Between PC_L_IN & PC_R_IN Trace
INCM_AUD_SIDE_AV
INCM_AUD_SC
INCM_AUD_COMP
INCM_AUD_PC
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
MAIN AUDIO/VIDEO
3
19
DDR_DQ[0-7]
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
DDR_DQ[8-15]
DDR_DQ[16-23]
DDR_DQ[24-31]
DDR_DM[0-3]
DDR STRAP
R401
4.7K
R402
R432
4.7K
4.7K
OPT
OPT
DDR_DQ[7]
DDR_DQ[9]
0
0
DDR_DQ[0] DDR_DQ[1] DDR_DQ[2] DDR_DQ[3] DDR_DQ[4] DDR_DQ[5] DDR_DQ[6]
DDR_DQ[7] DDR_DQ[8] DDR_DQ[9] DDR_DQ[10] DDR_DQ[11] DDR_DQ[12] DDR_DQ[13] DDR_DQ[14] DDR_DQ[15]
DDR_DQ[16] DDR_DQ[17] DDR_DQ[18] DDR_DQ[19] DDR_DQ[20] DDR_DQ[21] DDR_DQ[22]
DDR_DQ[23] DDR_DQ[24] DDR_DQ[25] DDR_DQ[26] DDR_DQ[27] DDR_DQ[28] DDR_DQ[29] DDR_DQ[30] DDR_DQ[31]
DDR_DM[0] DDR_DM[1] DDR_DM[2] DDR_DM[3]
DDR_QS0
DDR_QS0b
DDR_QS1
DDR_QS1b
DDR_QS2
DDR_QS2b
DDR_QS3
DDR_QS3b
R403
4.7K
R404
4.7K
HYNIX_DDR
11
0
1
01Reserve
LGE35230(BCM35230KFSBG)
U26 R26 U27 R27 V27 P26 U25 P27 R24 N24 T25 M23 R23 N25 T24 N26 L26 H27 L27 J26 M27 G27 M26 H26 L23 H25 L24 J24 M24 H23 L25 H24
T26 P25 J27 K24
T27 T28
P24 P23
K27 K28
K25 K26
4.7K
R406
4.7K OPT
Maker
SS
Hynix
Reserve
DDR_DQA_0 DDR_DQA_1 DDR_DQA_2 DDR_DQA_3 DDR_DQA_4 DDR_DQA_5 DDR_DQA_6 DDR_DQA_7 DDR_DQA_8 DDR_DQA_9 DDR_DQA_10 DDR_DQA_11 DDR_DQA_12 DDR_DQA_13 DDR_DQA_14 DDR_DQA_15 DDR_DQA_16 DDR_DQA_17 DDR_DQA_18 DDR_DQA_19 DDR_DQA_20 DDR_DQA_21 DDR_DQA_22 DDR_DQA_23 DDR_DQA_24 DDR_DQA_25 DDR_DQA_26 DDR_DQA_27 DDR_DQA_28 DDR_DQA_29 DDR_DQA_30 DDR_DQA_31
DDR_DMA_0 DDR_DMA_1 DDR_DMA_2 DDR_DMA_3
DDR_DQSA_P_0 DDR_DQSA_N_0
DDR_DQSA_P_1 DDR_DQSA_N_1
DDR_DQSA_P_2 DDR_DQSA_N_2
DDR_DQSA_P_3 DDR_DQSA_N_3
4.7K
R408
4.7K
IC101
NON_BCM_CAP
R407
R405
R409
4.7K OPT
R410
4.7K OPT
DDR_ADA_0 DDR_ADA_1 DDR_ADA_2 DDR_ADA_3
DDR_ADA_4 DDR_ADA_5 DDR_ADA_6
DDR_ADA_ALT_4 DDR_ADA_ALT_5 DDR_ADA_ALT_6
DDR_ADA_7 DDR_ADA_8
DDR_ADA_9 DDR_ADA_10 DDR_ADA_11 DDR_ADA_12 DDR_ADA_13 DDR_ADA_14
DDR_BAA_0
DDR_BAA_1
DDR_BAA_2
DDR_RASA_N DDR_CASA_N
DDR_WEA_N
DDR_CKEA
DDR_CKA01_P DDR_CKA01_N
DDR_CKA23_P DDR_CKA23_N
DDR_VREFA
DDR_RST_N
DDR_ZQ
DDR_DQ[0] DDR_DQ[1] DDR_DQ[2] DDR_DQ[3] DDR_DQ[4]
JEDEC Types : DDR_DQ[0:4] 00001 : DDR3-1333H (CasL=9)(O) 10101 : DDR3-1600K (CasL=11)
DDR_DQ[10]
DDR_DQ[9]
DDR_DQ[7] DDR_DQ[8] DDR_DQ[6] DDR_DQ[5]
Bus Width : DDR_DQ[10] 0 - 16b 1 - 32b (O) Chip Width : DDR_DQ[8] 0 - 8b 1 - 16b (O) Chip Size : DDR_DQ[6:5] 00 - 4Gbit 01 - 2Gbit (O) 10 - 1Gbit 11 - 512Mbit
V23 AB27 Y23 Y26
AB26 Y24 AC26
AB24 AC25 AC24
AB25 AD28 Y25 AA27 AC27 AA26 AA24 AD27
Y27 AB28 W24
V24 W25 V26
U24
W27 W28
N28 N27
U23
AA23
W26
R411 240
1%
DDR_AA0 DDR_AA1 DDR_AA2 DDR_AA3
DDR01_AA5 DDR01_AA6
DDR23_AA4 DDR23_AA5 DDR23_AA6
DDR_AA7 DDR_AA8 DDR_AA9 DDR_AA10 DDR_AA11
DDR_AA13 DDR_AA14
DDR_BAA0 DDR_BAA1 DDR_BAA2
DDR_RASb DDR_CASb DDR_WEb
DDR_CKE
DDR01_CLK DDR01_CLKb
DDR23_CLK DDR23_CLKb
DDR_VREFA
DDR_RESETb
DDR01_CLK
DDR01_CLKb
C453 1uF
6.3V
R412
DDR_DQ[0-7]
DDR_DQ[8-15]
GND
C412 1uF
ZQ
OUTIN
M8
H1
L8
B2 D9 G7 K2 K8 N1 N9 R1 R9
A1 A8 C1 C9 D2 E9 F1 H2 H9
J1 J9 L1 L9 T7
A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9
B1 B9 D1 D8 E2 E8 F9 G1 G9
+1.5V_DDR
C417 470pF
+1.5V_DDR
+1.5V_DDR
C415
0.01uF
C416
0.01uF
R415 240
1%
R416
4.99K 1%
R417
4.99K 1%
DDR_AA14
DDR_VREFA
+1.5V_DDR
DDR23_CLK
DDR23_CLKb
DDR_DQ[16-23]
DDR_DQ[24-31]
R418
C423
C421
10uF
4.7uF
C433
6.3V
NFM18PS105R0J
OUTIN
GND
K4B2G1646C
DDR_AA0 DDR_AA1 DDR_AA2
DDR_AA3 DDR23_AA4 DDR23_AA5 DDR23_AA6
DDR_AA7
DDR_AA8
DDR_AA9
DDR_AA10 DDR_AA11 DDR_AA12 DDR_AA13
DDR_BAA0 DDR_BAA1 DDR_BAA2
R419 56
56
1%
1%
C419 1000pF
DDR_CKEDDR_AA12
+1.5V_DDR
R420 10K
DDR_RASb DDR_CASb
DDR_WEb
DDR_RESETb
DDR_QS2
DDR_QS2b
DDR_QS3
DDR_QS3b
DDR_DM[2] DDR_DM[3]
DDR_DQ[16] DDR_DQ[17] DDR_DQ[18] DDR_DQ[19] DDR_DQ[20] DDR_DQ[21] DDR_DQ[22] DDR_DQ[23]
DDR_DQ[24] DDR_DQ[30] DDR_DQ[29] DDR_DQ[28] DDR_DQ[25] DDR_DQ[26] DDR_DQ[31] DDR_DQ[27]
N3
A0
P7
A1
P3
A2
N2
A3
P8
A4
P2
A5
R8
A6
R2
A7
T8
A8
R3
A9
L7
A10/AP
R7
A11
N7
A12/BC
T3
A13
M7
NC_5
M2
BA0
N8
BA1
M3
BA2
J7
CK
K7
CK
K9
CKE
L2
CS
K1
ODT
J3
RAS
K3
CAS
L3
WE
T2
RESET
F3
DQSL
G3
DQSL
C7
DQSU
B7
DQSU
E7
DML
D3
DMU
E3
DQL0
F7
DQL1
F2
DQL2
F8
DQL3
H3
DQL4
H8
DQL5
G2
DQL6
H7
DQL7
D7
DQU0
C3
DQU1
C8
DQU2
C2
DQU3
A7
DQU4
A2
DQU5
B8
DQU6
A3
DQU7
C410
6.3V
NFM18PS105R0J
C405 10uF
NFM18PS105R0J
K4B2G1646C
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10/AP A11 A12/BC A13
NC_5
BA0 BA1 BA2
CK CK CKE
CS ODT RAS CAS WE
RESET
DQSL DQSL
DQSU DQSU
DML DMU
DQL0 DQL1 DQL2 DQL3 DQL4 DQL5 DQL6 DQL7
DQU0 DQU1 DQU2 DQU3 DQU4 DQU5 DQU6 DQU7
C407 10uF
C402
6.3V
IC401
OUTIN
GND
VREFCA
VREFDQ
VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_7 VDD_8 VDD_9
VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDDQ_9
NC_1 NC_2 NC_3 NC_4 NC_6
VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8
VSS_9 VSS_10 VSS_11 VSS_12
VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSSQ_9
C403
+1.5V_DDR
C455
C454
1uF
1uF
6.3V
6.3V
DDR_AA0 DDR_AA1 DDR_AA2
DDR_AA3 DDR01_AA4 DDR01_AA5 DDR01_AA6
DDR_AA7
DDR_AA8
DDR_AA9
DDR_AA10 DDR_AA11 DDR_AA12 DDR_AA13
DDR_BAA0 DDR_BAA1 DDR_BAA2
R413 56
56
1%
1%
C401 1000pF
DDR_CKE
+1.5V_DDR
R414 10K
DDR_RASb DDR_CASb
DDR_WEb
DDR_RESETb
DDR_QS0
DDR_QS0b
DDR_QS1
DDR_QS1b
DDR_DM[0] DDR_DM[1]
DDR_DQ[0] DDR_DQ[1] DDR_DQ[2] DDR_DQ[3] DDR_DQ[4] DDR_DQ[5] DDR_DQ[6] DDR_DQ[7]
DDR_DQ[8] DDR_DQ[14] DDR_DQ[13] DDR_DQ[12] DDR_DQ[9] DDR_DQ[10] DDR_DQ[15] DDR_DQ[11]
4.7uF
N3 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3
M7
M2 N8 M3
J7 K7 K9
L2 K1 J3 K3 L3
T2
F3 G3
C7 B7
E7 D3
E3 F7 F2 F8 H3 H8 G2 H7
D7 C3 C8 C2 A7 A2 B8 A3
C425 10uF
C426 1uF
IC402
C432
6.3V
NFM18PS105R0J
GND
VREFCA
VREFDQ
VDDQ_1 VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 VDDQ_6 VDDQ_7 VDDQ_8 VDDQ_9
VSS_10 VSS_11 VSS_12
VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 VSSQ_6 VSSQ_7 VSSQ_8 VSSQ_9
OUTIN
VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VDD_6 VDD_7 VDD_8 VDD_9
NC_1 NC_2 NC_3 NC_4 NC_6
VSS_1 VSS_2 VSS_3 VSS_4 VSS_5 VSS_6 VSS_7 VSS_8 VSS_9
ZQ
+1.5V_DDR
+1.5V_DDR
M8
H1
L8
R421 240
B2 D9 G7 K2 K8 N1 N9 R1 R9
A1 A8 C1 C9 D2 E9 F1 H2 H9
J1 J9 L1 L9 T7
A9 B3 E1 G8 J2 J8 M1 M9 P1 P9 T1 T9
B1 B9 D1 D8 E2 E8 F9 G1 G9
C435
0.01uF
C436
0.01uF
1%
+1.5V_DDR
R422
4.99K 1%
R423
4.99K 1%
DDR_AA14
DDR_VREFA
+1.5V_DDR
DDR_RESETb
DDR_CKE
DDR_AA13 DDR_AA14DDR01_AA4
DDR_AA2
DDR_AA11
DDR_AA3 DDR_AA7
DDR_AA9 DDR_AA8 DDR_AA0
DDR_AA1 DDR_BAA0 DDR_BAA2 DDR_BAA1 DDR_AA10 DDR_AA12
DDR_WEb
DDR23_AA6 DDR23_AA4 DDR23_AA5
DDR01_AA6 DDR01_AA4 DDR01_AA5
DDR_CASb DDR_RASb
R428 82
R424 56 R425 56
AR401 56
AR402 56
AR403 56
AR404 56
AR405 56
AR406 56
R426 56 R427 56
+1.5V_DDR
R429 82
C437 100pF
OPT
C438 1uF
C400 0.1uF
C404 0.1uF
C450 0.1uF C406 0.1uF
C439 1uF
C408 0.1uF
C451 0.1uF
C409 0.1uF
C440 1uF
C452 0.1uF
C441 1uF
R430
4.7K OPT
C442 100pF
R431
4.7K OPT
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
MAIN DDR
4
19
fr. PWR SUPPLY UNIT
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
+5V_ST
R506 2KOPT
R508
R507 10K OPT
100
R509 100
C511
0.1uF 16V
C512
0.1uF 16V
RL_ON
MOD_ON
+5V_ST
+3.3V_Stand_By
+5V_ST
IC500
AP2121N-3.3TRE1
VOUT
2
3
1
GND
C510 10uF
6.3V
C514 10uF
6.3V OPT
C502 10uF 16V
C506
0.1uF 16V
VIN
+0.9V_CORE_BCM35230
+5V_MAIN
MLB-201209-0120P-N2
L500
Placed on SMD-TOP
C500
C503
10uF
10uF
16V
16V
C508
0.1uF 16V OPT
IC501
AOZ1037PI
[EP]LX
*NOTE 17
PGND
VIN
AGND
FB
NC
8
1
2
THERMAL
3
4
5A
R551
9
4.7K
OPT
R553 0
PGOOD
7
EN
6
R504
16K
COMP
5
OPT
C501
16V
0.1uF
+3.3V_ST
C504
1000pF
50V
R501
10K
OPT
R510 0
C516
0.1uF 16V
L501
2uH
C520 10uF
6.3V OPT
POWER_ON/OFF_2
P500
SMAW200-H18S1
1 3 5 7 9 11 13 15 17
MAX 4000 mA
C521 10uF
6.3V
C519
C518
10uF
10uF
6.3V
6.3V OPT
Switching freq: 555K
19
C597 10uF
6.3V
10 12 14 16 18
+5V_MULTI Switch
P_+5V
L502
MLB-201209-0120P-N2
L516
2 4
MLB-201209-0120P-N2
L503
MLB-201209-0120P-N2
6 8
R512 0
+0.9V_CORE
R500
R547
R503
10K
5%
0
1%
R1
2K
1%
R2
C598 10uF
6.3V
C596 3300pF 50V OPT
P_17V
C522 100uF 25V OPT
C523 10uF 16V
C524 10uF 16V
TUNER
C526
0.1uF 50V
C527 100uF 16V
C525 16V
0.1uF OPT
C528 100uF 16V
+5V_MAIN
+3.3V_TU
C530
0.1uF 16V
C531
0.1uF 16V
C532
0.1uF 16V
C517 10uF 16V
C537
0.1uF 50V
+5V_ST
C589
0.1uF 16V
P_+5V
C535 10uF
6.3V OPT
PSU_ERR_DET
C536 10uF
6.3V OPT
AC_DET
+3.3V_Normal
INPUT
C538 10uF 16V
AZ1085S-ADJTR/E1
INPUT
3
L504
MLB-201209-0120P-N2
C539
0.1uF 16V
IC503
AZ1117BH-ADJTRE1
1A
2
3
1
ADJ/GND
R541
R2
10
IC507
OUTPUT
2
3A
1
ADJ/GND
910
66.5
1%
1/10W
R1
R2
1%
V0 = 1.25(1+R2/R1)
R511
R540
+3.3V_TU
C541
C540
0.1uF
22uF
16V
16V
OUTPUT
R1 R542
1.2K OPT
V0 = 1.25(1+R2/R1) PLACE THE NEAR TO TUNER
C533 10uF
6.3V
R513 1
Max 960mA
C590
R534
10uF
1K
6.3V
1%
R554 1
C544
0.1uF 16V
+1.25V_TU
C546
0.1uF 50V
+2.5V_BCM35230
C591
0.1uF 16V
R552 120-ohm BLM18PG121SN1D
120-ohm
L515
+5V_NORMAL
P_17V
C549 10uF 25V
POWER_ON/OFF_2
+3.3V_NORMAL
R538 0
2012
1/10W
R537 0
3216
1/4W
OPT
C554
C551
0.01uF
4.7uF 50V
50V
R518 10K
OPT
0.1uF
C558
+1.5V_DDR
POWER_ON/OFF_2
+5V_MULTI
C563 10uF 16V OPT
+5V_MAIN
C565 10uF 16V OPT
C561
0.1uF 50V
-->3.12V
R519
16K
C560
R520
3.6K
0.015uF 50V
Vout=0.8*(1+R1/R2)
50V
OPT
+5V_MULTI
L506
MLB-201209-0120P-N2
C550
C553
0.1uF
22uF
50V
10V
+3.3V_ST
R502 10K
Q501
2SC3052
R505 10K
B
C
E
R522 10K
VIN_1
VIN_2
GND_1
GND_2
C505
0.47uF 25V
BOOT
17V->5V
IC506
TPS54231D
1
VIN
2
EN
3
SS
2A
4
OPT
10K
R523
R550
10K
OPT
C559
0.1uF
OPT R545 0
EP[GND]
1
2
3
4
VIN_3
15EN16
THERMAL
17
IC505
SN1007054RTER
7
5
6
COMP
AGND
VSENSE
R521
13K
C557 3300pF
50V
+5V_ST
S
RTR030P02
G
Q504
D
BOOT14PWRGD
RT/CLK
*NOTE 21
PH
8
GND
7
COMP
6
VSENSE
5
POWER_ON/OFF_2
16V
R527 22
13
PH_3
12
PH_2
11
PH_1
10
SS
9
8
R546
330K
+5V_MULTI
L519
OPT
C507 10uF 10V
C595
D500
C594
0.1uF 50V
L508
3.6uH
0.01uF
SMAB34
40V
INPUT
L512
22.0uH
C577
10uF
16V
C576 470pF 50V
R529 51K
*NOTE 13
C578
C579
10uF
10uF
6.3V
6.3V
IC504
AZ1085S-ADJTR/E1
3
1
ADJ/GND
1%
R524
150
R2
75
1%
R525
C592 50V
100pF
+5V_TU
R533 20K
1%
R1
R528
R535
Closed to Tuner
L518
R1
1%
R532
105K
R2
+3.3V_Normal
51K
1%
16K
1%
Max 420mA
C581 10uF 16V
C582 15pF 50V
C515 10uF
6.3V
C529 10uF
6.3V
C585
10uF
6.3V OPT
R2
Vout=Vref*(1+R1/R2)|Vref=0.827
+1.5V_DDR
R530
0
OUTPUT
2
C513
R526
R1
1K
C509
16V
22uF
10V
R555 1
0.1uF
1%
C593
0.1uF 16V
Vout=Vref*(1+R1/R2)|Vref=0.8
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
V0 = 1.25(1+R2/R1)
EAX63525101
POWER 5
19
SUB MICOM
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
MICOM_RESET
2:S15;11:S15
+3.3V_ST
R635
10K
C607
0.1uF 16V
GND
C601
C602
50V
12pF
X601 10MHz
10Mhz Crystal
12pF
50V
SW603
JTP-1127WEM
4 3
*NOTE12
12 DEBUG
OUT
+3.3V_ST
R625 10K
OPT
IC602
AZ7029RTRE1
OPT
3
2
GND
47K
OPT
R627
+3.3V_ST
R652
VCC
1
R629 10K
C625
0
10uF
FLMD0
OPT
R670
680
OPT
OPT
16V
R631
0
15pF
C605
*NOTE9
X602
32.768KHz R632
4.7M OPT
MICOM_DOWNLOAD
C606 15pF
MICOM_RESET
WRLS_DET
WRLS_PWR_EN
P601
12505WS-12A00
DEBUG
13
10
11
12
1
2
3
4
5
6
7
8
9
+3.3V_ST
+3.3V_ST
R640 10K
R641
R642
R64 9 22
R65 0 22
R65 1 22
10K
10K
for Debugger
MICOM_RESET NEC_ISP_Tx
NEC_ISP_Rx
OCD1A
OCD1B
FLMD0
NEC_ISP_Rx
NEC_ISP_Tx
EEPROM for Micom
IC601
M24C16-WMN6T
NC/E0
NC/E1
NC/E2
1
2
3
VSS
4
R68 7 47K
950
R610 10K
750/550
R611 10K
+3.3V_ST
550
R612 10K
750/950
R613 10K
OPT
R614 10K
MODEL1_OPT_0 MODEL1_OPT_1 MODEL1_OPT_2 MODEL1_OPT_3
R615 10K
NEC
MICOM MODEL OPTION
+3.3V_ST
PSU_ERR_DET BLUE_LED_0N
VCC
8
WC
7
SCL
6
SDA
5
R688
33
R689
33
C608
0.1uF
EEPROM_SCL
EEPROM_SDA
MODEL PWM OPTION
**PK50 : LED_RED
PK70 : LED_RED/LED_WHITE
PK90 : LED_RED/LED_GALAXY/LED_LOGO
PIN NAME
MODEL1_OPT_0
MODEL1_OPT_1
MODEL1_OPT_2
MODEL1_OPT_3
AMP_MUTE
PIN NO.
11
30
31
R605 100
750/950
R606 100 R604 0 R607 100
HIGH
ATSC
8 DVB
PZ550
PZ950
R608 10K
OPT
OPT
R609 10K
LOW
PZ750/950
PZ750/550
SCL2_3.3V
SDA2_3.3V
EEPROM_SCL
EEPROM_SDA
LED_LOGO
AC_DET
MODEL1_OPT_0
SOC_RESET
MODEL1_OPT_1
MOD_ON
OCD1B
SUB_SCL
+3.3V_ST
+3.3V_ST
R601 4.7K
R603 4.7K
R616
R617
R619 22
R621 22
R622 22
R623 22
R602
4.7K
22
22
P62/EXSCL0
P33/TI51/TO51/INTP4
OPT
P32/INTP3/OCD1B
OPT
+3.3V_ST
C603
0.1uF
P60/SCL0 P61/SDA0
P63
P75
P74 P73/KR3 P72/KR2 P71/KR1 P70/KR0
+3.3V_ST
GND
C604 0.1uF
P121/X1/OCD0A
REGC
VSS
VDD
45
46
47
48
1 2 3 4 5 6 7 8 9 10 11 12
13
14
15
16
P30/INTP1
P17/TI50/TO50
P31/INTP2/OCD1A
OPT
P16/TOH1/INTP5
R618 22
0
R633 22
P41
P40
RESET
P124/XT2/EXCLKS
P123/XT1
FLMD0
P122/X2/EXCLK/OCD0B
38
39
40
41
42
43
44
IC600
uPD78F0514
NEC
17
18
19
20
21
22
23
AVREF
P15/TOH0
P14/RXD6
P13/TXD6
P12/SO10
P11/SL10/RXD0
P10/SCK10/TXD0
R620 22
R637 120K
1/16W 1%
R636
100K
1/16W
P120/INTP0/EXLVI
37
36 35 34 33 32 31 30 29 28 27 26 25
1%
P140/PCL/INTP6 P00/TI000 P01/TI010/TO00 P130 P20/ANI0 ANI1/P21 ANI2/P22 ANI3/P23 ANI4/P24 ANI5/P25 ANI6/P26 ANI7/P27
24
+3.3V_ST
AVSS
C609 1uF
R639 22
R671
22
R638 22
R695 22
R696 10K
RL_ON
SCART_MUTE
MICOM_DOWNLOAD
MODEL1_OPT_3
MODEL1_OPT_2
DISP_EN
TOUCH_VER_CHECK
KEY2
KEY1
SUB ASSY
Wireless IR Buffer
+3.3V_ST
R654 10K
+3.3V_ST
R655 47K
R653 10K
R657
C
47K
B
Q603
E
2SC3052
R647 22 OPT
+3.3V_ST
R656 47K
+3.3V_ST
+3.3V_ST
+3.3V_ST
R660 10K
R661 10K OPT
+3.3V_Normal
R658
C
47K
B
Q604
E
2SC3052
KEY1
KEY2
LED_RED
SUB_SCL
SUB_SDA
+3.3V_Normal
+5V_MULTI
L601
550
LED_Power_On
L602 750/950
R645 47K
R643
R644 22
22
+3.3V_ST
C
E
R646 47K
C
E
B
Q602 2SC3052
B
Q601 2SC3052
R648 22 OPT
IR_WRLS
EDID_WP
C
*NOTE4
Q606
B
2SC3052
E
+5V_MULTI
R699
*NOTE2
R698
IR_MICOM
10K
20K
Lighting Logo LED
BLM18PG121SN1D
+3.3V_Normal
R692
LOGO
4.7K
R662
R665
10K
4.7K
R663 10K OPT
C610 10pF OPT
R664
4.7K
TOUCH_VER_CHECK
LED_LOGO
C611 680pF 50V
C612 220pF 50V
C613 220pF 50V
C614 10pF 50V OPT
C615 10pF OPT
C616 10pF 50V OPT
OPT
BLUE_LED_0N
R666 22
R667 22
C617 10uF
OPT
+3.3V_ST
R697
R669
10K
C
LOGO
10K
Q605
B
2SC3875S(ALY)
E
C618 50V 10pF OPT
C619 10pF 50V
C620 10uF
6.3V
C621 10pF 50V
LOGO
R691 330
+5V_MULTI
LOGO L608
C622 10pF 50V
C623 10pF 50V OPT
C624 10uF 16V
LOGO
P602
12507WS-04L
1
2
3
4
5
P603
12507WS-15L
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
4.7K
R626
R62 8 22
SUB_SDA
OCD1A
R63 0
HDMI_CEC
LED_Power_On
LED_RED
IR_MICOM
NEC_ISP_Tx
NEC_ISP_Rx
NEC_TXD
NEC_RXD
POWER_ON/OFF_2
EAX63525101
MICOM/IR
196
SHIELD
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
20
EAG59023302
JK703
YKF45-7058V
19
18
17
16
15
14
13
12
11 10
9
8
7
6
5
4
3
2
1
HP_DET
5V
GND
DDC_DATA
DDC_CLK
NC
CE_REMOTE
CK-
CK_GND
CK+
D0-
D0_GND
D0+
D1-
D1_GND
D1+
D2-
D2_GND
D2+
5V_HDMI_1
OPT R758
3.6K
D717
CDS3C05HDMI1
5.6V
OPT
R712
OPT
D706
5.5V
D718
5.6V
CDS3C05HDMI1
R708 22
R709
22
C734
0.1uF OPT
R707 1K
OPT
JP705
JP706
HDMI_HPD_1
DDC_SDA_1
DDC_SCL_1
HDMI1
CEC_REMOTE
CK-_HDMI1
CK+_HDMI1
D0-_HDMI1
D0+_HDMI1
D1-_HDMI1
D1+_HDMI1
D2-_HDMI1
D2+_HDMI1
BODY_SHIELD
GND
20
19
18
17
16
15
14
13
12
11 10
9
8
EAG62611201
7
6
5
4
3
2
1
HDMI_4
RSD-105156-100
JK704
HP_DET
5V
GND
DDC_DATA
DDC_CLK
NC
CE_REMOTE
CK-
CK_GND
CK+
D0-
D0_GND
D0+
D1-
D1_GND
D1+
D2-
D2_GND
D2+
5V_HDMI_4
OPT
R759
3.6K
D724
CDS3C05HDMI1
HDMI_4
5.6V
OPT
D714
5.5V
HDMI_4
OPT
R717
D723
5.6V
CDS3C05HDMI1
OPT C735
0.1uF
HDMI_4
22
R718
R719 22
HDMI_4
R779
0
HDMI_4
HDMI4-SIDE
OPT R722 1K
JP707
JP708
CEC_REMOTE
CK-_HDMI4
CK+_HDMI4
D0-_HDMI4
D0+_HDMI4
D1-_HDMI4
D1+_HDMI4
D2-_HDMI4
D2+_HDMI4
HDMI_HPD_4
DDC_SDA_4
DDC_SCL_4
+3.3V_HDMI
* HDMI CEC
+3.3V_ST
R760 27K
D715
BAT54
CEC_REMOTE HDMI_CEC
30V
S
OPT
BSS83
D716
AVRL161A1R1NT
Q709
G
B D
R761 100K
+3.3V_TU
C717
0.1uF 16V
IC702
AZ1117BH-1.8TRE1
3IN1
1A
2
OUT
ADJ/GND
+3.3V_Normal
BLM18PG121SN1D
BLM18PG121SN1D
C728 10uF
6.3V R778
1
L701
L702
+3.3V_HDMI
+1.8V_TU
C729
0.1uF 16V
C730
0.1uF
+5V_MULTI
5V_HDMI_1
SHIELD
20
EAG59023302
JK701
YKF45-7058V
BODY_SHIELD
20
EAG62611201
JK702
RSD-105156-100
19
18
17
16
15
14
13
12
11 10
9
8
7
6
5
4
3
2
1
19
18
17
16
15
14
13
12
11 10
9
8
7
6
5
4
3
2
1
HP_DET
5V
GND
DDC_DATA
DDC_CLK
NC
CE_REMOTE
CK-
CK_GND
CK+
D0-
D0_GND
D0+
D1-
D1_GND
D1+
D2-
D2_GND
D2+
HP_DET
5V
GND
DDC_DATA
DDC_CLK
NC
CE_REMOTE
CK-
CK_GND
CK+
D0-
D0_GND
D0+
D1-
D1_GND
D1+
D2-
D2_GND
D2+
5V_HDMI_2
D720
CDS3C05HDMI1
5V_HDMI_3
OPT R757
3.6K
D722
OPT
OPT
R756
D712
3.6K
5.5V
D719
CDS3C05HDMI1
5.6V
OPT
D713
5.5V
D721
5.6V
CDS3C05HDMI1
OPT
R703
R704 22
R705 22
5.6V
OPT
R706
R701 22
R702
22
5.6V
CDS3C05HDMI1
C732
0.1uF
OPT
JP703
JP704
OPT C733
0.1uF
JP701
JP702
1K
OPT R711 1K
R763 OPT
HDMI_HPD_2
DDC_SDA_2
DDC_SCL_2
HDMI2
HDMI_HPD_3
DDC_SDA_3
DDC_SCL_3
CEC_REMOTE
CK-_HDMI2
CK+_HDMI2
D0-_HDMI2
D0+_HDMI2
D1-_HDMI2
D1+_HDMI2
D2-_HDMI2
D2+_HDMI2
CEC_REMOTE
CK-_HDMI3
CK+_HDMI3
D0-_HDMI3
D0+_HDMI3
D1-_HDMI3
D1+_HDMI3
D2-_HDMI3
D2+_HDMI3
ARC
C736
0.1uF
R76 6
R76 7
63. 4
R713
4.7K
+5V_MULTI
D708
R714
4.7K
A1CA2
D707
HDMI_ARC
150
*NOTE 15
GND
HDMI3-SIDE
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
R715
4.7K
5V_HDMI_3
A1CA2
R716
4.7K
DDC_SDA_1
DDC_SCL_1
DDC_SDA_3
DDC_SCL_3
+5V_MULTI
5V_HDMI_2
A1CA2
D710
R720
4.7K
+5V_MULTI
5V_HDMI_4
D711
HDMI_4
R721
A1CA2
4.7K
HDMI_4
EDID Pull-up
R723
4.7K
HDMI_4
R724
4.7K
DDC_SDA_2
DDC_SCL_2
DDC_SDA_4
DDC_SCL_4
HDMI2
CK-_HDMI2
CK+_HDMI2
D0-_HDMI2
D0+_HDMI2
D1-_HDMI2
D1+_HDMI2
D2-_HDMI2
D2+_HDMI2
HDMI3
CK-_HDMI3
CK+_HDMI3
D0-_HDMI3
D0+_HDMI3
D1-_HDMI3
D1+_HDMI3
D2-_HDMI3
D2+_HDMI3
C701 10uF 10V
C702 10uF 10V
C704 10uF 10V
C705
0.1uF
16V
C706
0.1uF
16V
C708
0.1uF
16V
C709
0.1uF
16V
R1XCN R1XCP R1X0N R1X0P R1X1N R1X1P R1X2N R1X2P
VCC33_1
RSVD_1
R2XCN R2XCP R2X0N R2X0P R2X1N R2X1P R2X2N R2X2P
HDMI1
D2-_HDMI1
D1+_HDMI1
D0+_HDMI1
D0-_HDMI1
D1-_HDMI1
D2+_HDMI1
R0X0N
R0X0P
R0X1N
R0X1P
R0X2N
R0X2P
[EP]GND
67
68
69
70
71
72
1 2
THERMAL
3
73 4 5 6 7 8 9
SII9287B
10 11 12 13 14 15 16 17 18
19
R3XCN20R3XCP21R3X0N22R3X0P23R3X1N24R3X1P25R3X2N26R3X2P
D1-_HDMI4
D0+_HDMI4
D0-_HDMI4
D1+_HDMI4
CK+_HDMI4
CK-_HDMI4
HDMI4
CK-_HDMI1
CK+_HDMI1
R0XCN
R0XCP
65
66
IC701
D2-_HDMI4
HDMI S/W OUTPUT
HDMI_CLK-
TXCP
TXCN
VCC33_3
63
64
27
28
DSDA030DSCL0
RSVD_2
VCC33_2
D2+_HDMI4
HDMI_RX0-
HDMI_CLK+
TX0N
61
62
29
DDC_SCL_1
DDC_SDA_1
HDMI_RX0+
HDMI_RX1-
HDMI_RX1+
TX2N
TX1P
TX1N
TX0P
58
59
60
31
32
33
DSDA134DSCL1
R0PWR5V
CBUS_HPD0
DDC_SDA_2
HDMI_HPD_1
HDMI_RX2-
HDMI_RX2+
TPWR_CI2CA
TX2P
55
56
57
CBUS_HPD1
DDC_SCL_2
54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37
35
36
R1PWR5V
HDMI_HPD_2
CSCL CSDA INT CEC_D CEC_A R4PWR5V DSCL4 DSDA4 R3PWR5V CBUS_HPD3 DSCL3 DSDA3 R2PWR5V CBUS_HPD2
DSCL2 DSDA2 SBVCC MICOM_VCC33
EAX63525101
HDMI
R777
4.7K
C703
1uF
1uF
C707
R725 10
R726 10
R730
5V_HDMI_2
R729
1K *NOTE 22
5V_HDMI_1
1%
R727
1K
*NOTE 22
+5V_MULTI
0
C710
1uF
1%
C711
R780 33
R781 33
OPT
R782 33
OPT
R783 33
1uF
10V
HDMI_HPD_4
DDC_SCL_4
DDC_SDA_4
HDMI_HPD_3
DDC_SCL_3
DDC_SDA_3
1uF
C715
SCL3_3.3V
SDA3_3.3V
SCL1_3.3V
SDA1_3.3V
R733 10
*NOTE 22
R731
1K
R732 10
C721
1uF *NOTE 22
7
5V_HDMI_4
1%
5V_HDMI_3
R734
1K
1%
19
RGB/ PC AUDIO/ SPDIF/ CVBS / COMP / RS232C
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
RGB PC
*NOTE 19
OPT
R881 0
+5V_MULTI
OPT R806 10K
C806
0.1uF 16V
22
R813
A0
A1
A2
GND
IC802
AT24C02BN-SH-T
1
2
3
4
R819
C809 18pF
2.7K
C810
18pF
50V
50V
C807 22pF 50V
VCC
8
WP
7
SCL
6
SDA
5
D804 30V
DSUB_VSYNC
DSUB_HSYNC
IC801 74F08D
D0A
R800
22
R801
22
*NOTE 19
R882 0
D0B
Q0
D1A
OPT
D1B
Q1
GND
VCC
14
1
D3B
13
2
D3A
12
3
Q3
11
4
D2B
10
5
D2A
9
6
Q2
7
8
R821
2.7K
R822 22
R823 22
D810
KDS184
C
A2
A1
C811 R827 10K
R826 0 R830
0.1uF 16V
0
+5V_MULTI
EDID_WP
RGB_DDC_SCL
RGB_DDC_SDA
PC AUDIO
JK801
PEJ027-01
3 E_SPRING
6A
7A
4
5
7B
6B
T_TERMINAL1
B_TERMINAL1
R_SPRING
T_SPRING
B_TERMINAL2
T_TERMINAL2
D801
5.1V D837
5.1V
D802
5.1V D838
5.1V
R834 470K
R833 470K
L803
BLM18PG121SN1D
C805 560pF 50V
L804
BLM18PG121SN1D
C804 560pF 50V
C816 560pF 50V
C818 560pF 50V
PC_R_IN
PC_L_IN
SPDIF OUT
SPDIF_OUT
R851 0
R859
2.7K
+3.3V_Normal
D803 30V
OPT
C803
0.1uF 16V
VINPUT
JST1223-001
GND
VCC
1
JK802
2
3
Fiber Optic
4
FIX_POLE
ROM DOWNLOAD for Plasma
RS232C JACK
IC803
MAX3232CDR
C1+
C8120.1uF
1
V+
C813
0.1uF
2
C1-
3
C2+
C8140.1uF
4
C2-
5
V-
C8150.1uF
6
DOUT2
7
RIN2
8
EAN41348201
ROM_DL_CK
ROM_DL_DA
16
15
14
13
12
11
10
OPT R807 10K
DSUB_B+
DSUB_G+
DSUB_R+
R802 10
D828
R825
30V
220pF
OPT
50V OPT
+3.3V_ST
C820
0.1uF
VCC
GND
DOUT1
RIN1
ROUT1
DIN1
DIN2
ROUT2
9
UART_TXD_3D
UART_RXD_3D
R824 220pF 50V OPT
+3.3V_ST
D815 30V OPT
OPT
100
R879
100
R808
100
R809
100
R878
*NOTE 16
OPT
R803
R810
4.7K
4.7K
C835
4.7pF 50V
C837
4.7pF 50V
C836
4.7pF 50V
C831 220pF 50V OPT
R811 10
R812
22
R874 22
R816 75
R872 22
R815 75
R873 22
R817 75
C832 270pF 50V OPT
D831D830
D805 30V
D813
C808 22pF 50V
D808 30V
D806 30V
D807 30V
P801
SPG09-DB-010
JP809
JP810
D814
RED_GND7GREEN_GND8BLUE_GND9NC10SYNC_GND
6
SPG09-DB-009
D809
5.6V OPT
RED2GREEN3BLUE4GND_15DDC_GND
GND_212DDC_DATA13H_SYNC14V_SYNC15DDC_CLOCK
11
1
10
5
9
4
8
3
7
2
6
1
P802
R828 0
R829 0
0
R804
0
R805
D811
5.6V OPT
SHILED
16
BCM_RX
NEC_RXD
BCM_TX
NEC_TXD
+3.3V_Normal
R831 10K
D812
5.6V
C834 100pF 50V
DSUB_DET
R8321K
CVBS SIDE JACK
JK800
PPJ235-01
COMP/AV REAR JACK
JK803
PPJ234-02
5C
4C
3C
4B
3A
4A
5A
[RD]E-LUG
6E
[RD]O-SPRING_2
5E
[RD]CONTACT_2
4E
[WH]O-SPRING
5D
[RD]CONTACT_1
4C
[RD]O-SPRING_1
5C
[RD]E-LUG-S
7C
[BL]O-SPRING
5B
[BL]E-LUG-S
7B
[GN]CONTACT
4A
[GN]O-SPRING
5A
[GN]E-LUG
6A
[RD]E-LUG
[RD]O-SPRING
[RD]CONTACT
[WH]O-SPRING
[YL]CONTACT
[YL]O-SPRING
[YL]E-LUG
D835
5.1V
D800
5.1V
D836
5.1V D827
5.1V
D826
5.1V D824
5.1V
D825
5.6V
+3.3V_Normal
R838
2.7K
R835 470K
R836 470K
R842 75
D823
5.1V
D817
5.1V
D829
5.1V
5.1V
D822
5.6V
D833
5.1V D819
5.1V
D834
5.1V D821
5.1V
D832
5.6V
D820
5.1V
D816
5.1V
D818
R866 12K OPT
R867 12K OPT
R850 10
C817 47pF 50V AV2_CVBS_EMI
R849 1K
R843 470K
R844
470K
R845 75
R846 75
R847 75
+3.3V_Normal
R848
2.7K
AV2_SIDE_R_IN
AV2_SIDE_L_IN
AV2_SIDE_CVBS_IN
AV2_SIDE_CVBS_DET
+3.3V_Normal
R880
2.7K
L800
CM2012FR27KT
C825 27pF 50V
L801
CM2012FR27KT
C823 27pF 50V
L802
CM2012FR27KT
C824 27pF 50V
C800 27pF 50V
C801 27pF 50V
C802 27pF 50V
1K
R877
R85610 1%
R85710 1%
R85810 1%
1K
R852
CLOSE TO JUNCTION
R868
R869
12K
12K
OPT
OPT
COMP_AV_DET
COMP_Pr
COMP_Pb
COMP_Y/AV1_CVBS
COMP_DET
COMP_R_IN
COMP_L_IN
1. COMP_DET + COMP_AV_DET = COMPONENT
2. COMP_DET ONLY = AV
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
COMMON JACK
8
19
SCART
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
+5V_MULTI
NON_EU
PPJ-230-01
JK901
FIX-TER
11
10
9
8
7
6
5
4
13
[GN]GND
[GN]G
[GN]C_DET
[BL]B
[RD]R
[WH]L_IN
[RD]R_IN
[RD]MONO
SHIELD
23
22
21
20
EU
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
PSC008-02
JK900
R967 0 NON_EU
AV_DET
COM_GND
SYNC_IN
SYNC_OUT
SYNC_GND2
SYNC_GND1
RGB_IO
R_OUT
RGB_GND
R_GND
D2B_OUT
G_OUT
D2B_IN
G_GND
ID
B_OUT
AUDIO_L_IN
B_GND
AUDIO_GND
AUDIO_L_OUT
AUDIO_R_IN
AUDIO_R_OUT
+3.3V_Normal
R923 10K
R924
C914 220pF 50V OPT
C921 27pF 50V
C923 27pF 50V
C925 27pF 50V
1K
EU R922
75
SC_R/COMP2_Pr
SC_G/COMP2_Y
SC_B/COMP2_Pb
C913 OPT
C912 OPT
DTV/MNT_LOUT
DTV/MNT_ROUT
R909 75
R907 75
R906 75
R903 470K
R902 470K
EU
C902 6800pF 50V
EU
C901 6800pF 50V
R914 75 EU
CM2012FR27KT
C905 27pF 50V
CM2012FR27KT
C904 27pF 50V
CM2012FR27KT
C903 27pF 50V
C909 47pF 50V
EU
L900
L901
L903
R913 470K OPT
R912 470K OPT
C906
0.1uF 16V
EU R919 1
D908
5.6V OPT
D911
5.5V EU
D907
5.5V EU
D900
0
R968
EU
5.5V
D901
5.5V
D902
5.5V
D903
5.6V
D904
5.6V
D905
5.6V EU
D906
5.6V EU
EU R901
1K
EU R900
1K
SC/COMP2_DET
R949 680 EU
R970 680 EU
OPT D910 30V
EU
EU
EU
EU R948
1K *NOTE 8
OPT
R945 12K
OPT
R938 12K
R951 120
C
R953 82
B
Q901
E
2SC3052
R950
R971
300
300
EU
REC_8
SC_ID
SC/COMP2_L_IN
SC/COMP2_R_IN
C919
0.1uF 50V
EU
R954 47K
EU
C918 47uF 16V
EU
EU
EU R929
10K
EU
R952 15K
+3.3V_Normal +3.3V_Normal
EU
R973
10K
C
EU
Q908
B
2SC3052
E
EU
*NOTE3
EU R975 1K
SC_CVBS_IN
C917 100uF 25V
R928 470K
EU
E
B
EU
Q900
C
MMBT3906(NXP)
EU
R927
EU
75
OPT
R933 0
EU
R932
9.1K
D909 30V
*NOTE 14
OPT
OPT C916 330pF 50V
OPT C915 330pF 50V
R935 22
EU
P_17V
EU
C920
0.1uF 50V
ATV_OUT / MNT_OUT
EU R974 10K
C
EU
Q909
B
2SC3052
E
L902 BLM18PG121SN1D
SC_FB
*NOTE11
EU
C922
0.1uF 16V
EU R941
10K
IC901
NLASB3157DFT2G
SELECT
6
EU
VCC
5
A
4
Selece = High ==> A = B1
Selece = Low ==> A = B0
B1
1
GND
2
B0
3
SMD GASKET
GAS1
MDS62110209
GAS2
MDS62110209
GAS3
MDS62110209
GAS4
MDS62110209
GAS5
MDS62110209
GAS6
MDS62110209
GAS7
MDS62110209
GAS8
MDS62110209
GAS9
MDS62110209
GAS10
MDS62110209
GAS11
MDS61887711
GAS12
MDS62110209
GAS13
MDS61887711
GAS14
MDS62110209
GAS15
MDS62110209
GAS17
MDS62110209
DTV_ATV_SELECT
ATV_OUT
C929
C927
180pF
180pF
50V
50V
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
OPT
R946 75 1% OPT
CLOSE TO SOC
MDS62110209
MDS62110209
MDS62110209
MDS62110209
MDS61887711
MDS62110209
R947 75 1% EU
GAS18
GAS19
GAS20
GAS21
GAS22
GAS23
DTV/MNT_V_OUT
OPT
OPT
OPT
OPT
OPT
AUD_OUT
EU
SCART_Lout_N
SCART_Rout_N
EU
R910 2K
R911 2K
EU
C908 10uF 16V
EU
R918 5.6K
R915 5.6K
R916 5.6K
R917 5.6K
EU
C907 10uF 16V
EU R921 33K
EU C911
33pF
EU
EU
EU
R920 33K
C910 33pF
EU
R926 10K
EU
EU
R925 10K
EU
EU
P_17V
C900
0.1uF 50V
DTV/MNT_LOUT
SCART_Lout_P
SCART_Rout_P
DTV/MNT_ROUT
R962
OPT
OPT
47K
R961 47K
OPT R963 47K
OPT R964 47K
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
AS324MTR-E1
OUT1
IN1-
IN1+
VCC
IN2+
IN2-
OUT2
1
2
3
4
5
6
7
IC900
OPT
R959 1K
R958 1K
P_17V
OPT
R965 3K
R960 10K
OPT
R966 12K
C
C
OPT
E
Q902 2SC3052
OPT
B
Q903 2SC3052
OPT
E
OPT
B
C
B
Q904 2SC3052
OPT
E
REC_8
OUT4
14
IN4-
13
IN4+
12
GND
11
IN3+
10
IN3-
9
OUT3
8
[SCART AUDIO MUTE]
DTV/MNT_LOUT
DTV/MNT_ROUT
EU Q905 2SC3052
EU Q906 2SC3052
R939 2K
R940 2K
EU
EU
OPT RT1P141C-T112 Q907
3
2
EU R972
0
+3.3V_ST
EU
R944
4.7K
1
EU
C924
0.1uF
SCART_MUTE
[SCART PIN 8]
SC_RE1
SC_RE2
R956 10K OPT
R957 10K
OPT
EAX63525101
SCART
09
19
WIRELESS READY MODEL
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
WRLS_DET
WRLS_SCL
WRLS_SDA
IR_WRLS
* weapon.ahn $ [MRMC] Motion ReMoCon
WIRELESS
R1001 1K
D1001
WIRELESS
P_17V_WRLS
+3.3V_Normal
WIRELESS
R1004 10K
5.6V
CDS3C05HDMI1
D1002
CDS3C05HDMI1
VCC[24V/20V/17V]_1
VCC[24V/20V/17V]_2
VCC[24V/20V/17V]_3
VCC[24V/20V/17V]_4
VCC[24V/20V/17V]_5
VCC[24V/20V/17V]_6
5.6V WIRELESS
DETECT
INTERRUPT
GND_1
RESET
GND_2
I2C_SCL
I2C_SDA
GND_3
UART_RX
UART_TX
GND_4
GND_5
GND_6
WIRELESS
JK1000
KJA-PH-3-0168
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
IR
18
19
20
21
SHIELD
Wireless Power On/OffWireless Interface
P_17V
WIRELESS L1000
BLM18PG121SN1D
WIRELESS
R1014 33
R1015 33
WIRELESS
WIRELESS
R1012 22K
WIRELESS
R1013
2.2K
C
WIRELESS
B
Q1000 MMBT3904(NXP)
E
*weapon.ahn $ [WRLS] - WiReLeSs
WIRELESS
C1000
0.1uF 50V
WIRELESS
R1011
WRLS_PWR_EN
Wireless I2C connection with I2C_1 Address : 0x20
WRLS_SDA
WRLS_SCL
10K
WIRELESS
C1001
2.2uF 50V
G
SDA2_3.3V
SCL2_3.3V
S
WIRELESS
Q1001 ZXMP3F30FHTA
D
WIRELESS
C1002
0.01uF 50V
OPT
C1004 10uF 25V
P_17V_WRLS
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
WIRELESS 19
10
1
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
2 3 4
GND IN_1 IN_2 EN
+3.3V_Normal
R1103
4.7K
OPT
USB_CTL1
R1106
2.7K
C1103 10uF 10V
/USB_OCD1
USB 1
3AU04S-305-ZC-(LG)
JK1101
1234
USB DO WN STR EAM
L1102
MLB-201209-0120P-N2
120-ohm C1100 220uF 16V
OUT_2 OUT_1
FLG
NC
IC1100
AP2191DSG
8 7 6 5
EAN61849601
USB_DM1
USB_DP1
5
USB 2
3AU04S-305-ZC-(LG)
JK1102
1234
USB DO WN STR EAM
D1100
ADUC 5S 03 0R5
5.5V
L1103
MLB-201209-0120P-N2
120-ohm C1105 220uF 16V
D1101
ADUC 5S 03 0R5
5.5V
IC1101
AP2191DSG
NC
8
OUT_2
7
OUT_1
6
FLG
5 EAN61849601
1 2 3 4
GND IN_1 IN_2 EN
+3.3V_Normal
R1112
4.7K OPT
USB_CTL2
R1113
2.7K
C1106 10uF 10V
/USB_OCD2
USB_DM2
USB_DP2
D1108
5
ADUC 5S 03 0R5
5.5V
D1109 ADUC 5S 03 0R5
5.5V
Ethernet Block
+2.5V_BCM35230
JK1100
43-10013AD11-1
D1
D2
D3
D4
9
L1100
CIC21J501NE
1
L1104 CIC21J501NE
2
3
4
5
6
C1101
0.1uF
16V
7
8
C1108
0.1uF 16V
+3.3V_Normal
D1103
5.5V
D1105
5.5V
D1106
5.5V
D1107
R1100 510
R1101
510
D1104
D1102
5.5V
5.5V
+5V_MULTI
0.1uF
+5V_MULTI
C1107
0.1uF
5.5V
C1104
M_REMOTE_TX
MOD_TX
EPHY_LINK
EPHY_ACTIVITY
EPHY_TDP
EPHY_TDN
EPHY_RDP
EPHY_RDN
R1136
REMOTE_OR_MODULE_TX
REMOTE_OR_MODULE_RX
R1138
OPT
0
+3.3V_Normal
M_REMOTE_RX
MOD_RX
C1102
0.1uF
+3.3V_Normal
R1139
4.7K OPT
R1140 47K OPT
REMOTE_SW_CTRL
ROM_DL_DA ROM_DL_CK
MOD_RX MOD_TX
+3.3V_Normal
R1125
4.7K
+3.3V_Normal
R1123
4.7K
R1124
4.7K
R1122
4.7K
MOD_SDA DISP_EN
MOD_SCL
R1119 0 R1120 0
TCLK4P TCLK4N
TCLK3P TCLK3N
TCLK2P TCLK2N
TCLK1P TCLK1N
100
R1121
27K
TE4P TE4N TD4P TD4N
TC4P TC4N TB4P TB4N TA4P TA4N
TE3P TE3N TD3P TD3N
TC3P TC3N TB3P TB3N TA3P TA3N
TE2P TE2N TD2P TD2N
TC2P TC2N TB2P TB2N TA2P TA2N
TE1P TE1N TD1P TD1N
TC1P TC1N TB1P TB1N TA1P TA1N
R1141
R1115
P1101
FF05004-80
0
OPT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
LVDS_N 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81
LVDS_P
P1101-*1
104060-8017
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
81
OPT
0
R1137
IC1102
HEF4053B
Y1B
1
Y0B
2
Y1C
3
ZC
4
Y0C
5
E
6
VEE
0
7
VSS
8
VDD
16
ZB
15
ZA
14
Y1A
13
Y0A
12
SA
11
SB
10
SC
9
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
USB/Ethernet/LVDS
11
19
Motion Remote controller
Copyright © 2011 LG Electronics Inc. All rights reserved. Only for training and service purposes
LGE Internal Use Only
TI solution M_REMOTE OPTION
+3.3V_Normal
P1201
12507WS-12L
13
L1201
R1208 100
R1209 100
120-ohm
R1211 100
R1212 100
R1213 100
R1223 22
R1222 22
R1224 22
R1215 22
M_REMOTE_RX
M_REMOTE_TX
1
2
3
4
5
6
7
8
9
10
11
12
R1216
2.7K
3D_GPIO_0
3D_GPIO_1
3D_GPIO_2
3D_SYNC_RF
+3.3V_Normal
R1218
R1217
2.7K
2.7K
M_RFModule_RESET
DC_MREMOTE
DD_MREMOTE
ALL M_REMOTE OPTION
THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.
EAX63525101
M_REMOCON
12 19
Loading...
+ 56 hidden pages