LG 50PC5D-UL User Manual

User’s Guide Specification

User’s Guide Specification

Model Description

1.

MODEL

SUFFIX

2.

32/37/42LC7D-UK
42/50PC5D-UL

USA

Printing Specification

1. Trim Size (Format) : 185mm x 260 mm

2. Printing Colors

• Cover : 1 COLOR (BLACK)

• Inside : 1 COLOR (BLACK)

3. Stock (Paper)

• Cover : Coated paper , S/White 150 g/㎡

• Inside : Uncoated paper , 백상지 60 g/㎡

4. Printing Method : Off set

5. Bindery : Saddle stitch

6. Language : English (1)

7. Number of pages : 32

BRAND

Product Name

LG
32/37/42LC7D,

42/50PC5D

담 당 관리자

Park SY

07.06.29

Part No.

KANG

KWANG SUK

07.06.29

MFL34797033
(0801-REV03)

“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

N
O
T
E
S

Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1)Eco-hazardous substances test report should be submitted

when Part certification test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

Special Instructions3.

(1) Origin Notification

* LGEMX : Printed in Mexico
* LGERS : Printed in Mexico
* LGEAZ : Printed in Brazil
* LGESP : Printed in Brazil
* LGESY : Printed in China

4.

Changes

9

8

7

6

5

* LGENT : Printed in China
* LGENP : Printed in China
* LGEIL : Printed in India
* LGEDI : Printed in Indonesia
* LGEIN : Printed in Indonesia

* LGEMA : Printed in Poland
* LGEWA : Printed in U.K.
* LGEEG : Printed in Egypt
* LGERA : Printed in Russia
* LGEAK : Printed in Kazakhstan

* LGETH : Printed in Thailand
* LGEVN : Printed in Vietnam

4

Jan./09/07 Park sun young

3

2

Nov./01/07 Park sun young S7-97591
Sep./14/07 Park sun young S7-95015

1

REV.

NO.

MM/DD/YY

SIGNATURE

S8-05245

CHANGE NO.

Changed inch form.

Changed antenna contents and Simplink function.

Applied PQ test results.

CHANGE CONTENTS

Pagination sheet

Pagination sheet

P/NO.MFL34797033
Total pages : 32 pages

Front cover

LG(EN)

P/NO.

2….

…. ….

30

Blank

page

Rear cover

LG

Please read this manual carefully before operating
your set.

Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.

LCD TV PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

32LC7D
32LC7DC
37LC7D
42LC7D

PLASMA TV MODELS

42PC5D
42PC5DC
50PC5D
50PC5DC

P/NO : MFL34797033 (0801-REV03)

Printed in Korea

www.lgusa.com / www.lgcommercial.com

As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.

ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).

An extended owner’s manual that contains information
on the advanced features of these LG TV sets is located
on the CD-ROM provided in an electronic version.

To read these files, you will need to use personal computer
(PC) equipped with a CD-ROM drive.

MFL34797033-en-simple 1/9/08 3:11 PM Page 1

2

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to com­ply with the limits for a Class B digital device, pur­suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre­quency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or televi­sion reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment
and receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is con­nected.

- Consult the dealer or an experienced radio/TV
technician for help.

Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

The lightning flash with arrowhead
symbol, within an equilateral triangle,

is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to
the presence of important operating and main­tenance (servicing) instructions in the literature
accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding sys­tem of the building, as close to the point of the cable
entry as practical.

MFL34797033-en-simple 11/1/07 2:35 PM Page 2

3

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate
booklet or sheet, or be located before any operating instructions in an instruction for installation for use and
supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety
information may be included by adding statements after the end of the following safety instruction list. At the
manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be
placed immediately adjacent to that safety instruction:

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Unplug this apparatus when unused for long
periods of time.

1

2

3

4

5

6

7

8

MFL34797033-en-simple 11/1/07 2:35 PM Page 3

4

SAFETY INSTRUCTIONS

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Never touch this apparatus or antenna during
a thunder or lighting storm.

Do not allow a impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has exposed to rain or moisture,
does not operate normally, or has been
dropped.

CAUTION concerning the Power Cord :
Most appliances recommend they be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner's
manual to be certain.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates dam­age or deterioration, unplug it, discontinue use

of the appliance, and have the cord replaced
with an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Outdoor use marking :
WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain
or moisture.

Wet Location Marking : Apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on or over apparatus.

GGRROOUU NN DD IINNGG

Ensure that you connect the earth ground wire
to prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.

DDIISS CCOONN NN EECC TTIINNGG DDEEVVIICCEE FF RROOMM MMAAIINNSS

Mains plug is the disconnecting device. The
plug must remain readily operable.

9

12

10

11

13

14

15

16

17

Power
Supply

Short-circuit

Breaker

MFL34797033-en-simple 11/1/07 2:35 PM Page 4

5

CONTENTS

HOW TO USE THE OWNER'S MANUAL ON THE CD-ROM

To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The “ACRORD" folder on the CD-ROM contains the installation programs for them.

If you want to install those programs, Open the “My Computer” Open the “LG” Open the
“ACRORD” double-click your language.

TO VIEW THE OWNER'S MANUAL ON THE CD-ROM

The Owner's Manual files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically. (for Window only)

GG

If the web page does not appear automatically, open the Owner's Manual file directly.
Open the “My computer” Open the “LG” Open the “index.htm” file.

NOTE

!

When you select your product,
display the PDF file.

You can find the desired contents
easily using the bookmark.

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . .3

PREPARATION

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Remote Control Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Back Cover for Wire Arrangement

. . . . . . . . . . . . . . . . . . . . .12

Attaching the TV to a wall

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . .16

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

WATCHING TV

Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Channel Search

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Open Source Software Notice

. . . . . . . . . . . . . . . . . . . . . . . . . .30

MFL34797033-en-simple 11/1/07 2:35 PM Page 5

PREPARATION

6

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your product. If an accessory is missing, please con­tact the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.

The accessories can be different from the figures shown here.
For further information, see the the Owner's Manual files supplied CD-ROM.

75ohm Round Cable

OOppttiioonn EExxttrraass

D-sub 15 pin Cable

FFoorr LLCCDD TTVV mmooddeellss

2-Eye-bolts

(Refer to p.14)

2-Wall brackets
(Refer to p.14)

FFoorr PPllaassmmaa TTVV mmooddeellss

Cable

Management

4-Bolts for stand assembly

(Refer to p.15)

3322LLCC77DD // 77DD CC,,

3377LL CC77DD oonnllyy

* Slightly wipe stained spot on the exterior only with the polishing

cloth for the product exterior if there is stain or fingerprint on
surface of the exterior.

* Do not wipe roughly when removing stain. Please be cautions of

that excessive pressure may cause scratch or discoloration.

Polishing Cloth

1.5V 1.5V

Owner’s Manual CD Manual

(Refer to p.5)

123

456

78

0

9

B
A

C
K

V
O

L

C
H

M

U

T
E

F
A

V

B

R
I

G
H

T

-

M
E

N
U

B
R

I
G
H
T

+

E
N

T
E

R

E
X
I
T

T
I
M

E

R

R
A

T
I
O

S
I
M

P
L

I
N
K

P

O
W

E
R

V
C

R

T
V

D
V
D

A

U
D

I
O

C

A
B

L

E

S
T

B

M

O

D
E

T
V
I
N

P
U

T

IN
P

U
T

C
H

E
N

U

B
R

I
G
H

T
+

E
N

T
E

R

R
A
T

IO

S
I
M

P
L
I
N

K

1

4

7

Remote Control,

Batteries

Power Cord

Copyright© 2007 LGE,
All Rights Reserved.

This feature is not available for all models

This feature is not available for all models

2- TV Bracket Bolts

(Refer to p.14)

2- TV Brackets,

2- Wall Brackets

(Refer to p.14)

Twist Holder

Arrange the wires with

the twist holder.

MFL34797033-en-simple 1/9/08 8:31 PM Page 6

PREPARATION

7

FRONT PANEL INFORMATION

■

Here shown may be somewhat different from your TV.

■

NOTE: If your product has a protection tape attached, remove the tape.

And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

Front Panel Controls

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates green when the set is switched on.

Remote Control Sensor

POWER
Button

INPUT
Button

MENU
Button

ENTER
Button

VOLUME
(

FF,GG

)Buttons

CHANNEL
(

EE,DD

)Buttons

CH

VOL

ENTER

MENU

INPUT

CH

VOL

ENTER

MENU

INPUT

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates green when the set is switched on.

CHANNEL(DD,EE)Buttons

VOLUME(

FF,GG

)Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

Plasma TV Model

LCD TV Model

MFL34797033-en-simple 11/1/07 2:35 PM Page 7

VOL

CH

INPUT

MENU

ENTER

CH

VOL

ENTER

MENU

INPUT

PREPARATION

8

PREPARATIONPREPARATION

BACK PANEL INFORMATION

■

Here shown may be somewhat different from your TV.

Plasma TV Model

LCD TV Model

R

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

MONO

( )

AUDIO

S-VIDEO

AV IN 1

SERVICE

ANTENNA/

CABLE IN

OPTICAL

DIGITAL AUDIO OUT

HDMI IN

HDMI/DVI IN

1

2

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

10

11

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

1

3

5

4

8

6

7

9

2

10

R

RGB IN

HDMI IN

HDMI/DVI IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

1

1

2

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

OPTICAL

MONO

( )

AUDIO

S-VIDEO

DIGITAL

AUDIO OUT

AV IN 1

SERVICE

1

3

5

4

6

7

9

2

10

8

10

11

MFL34797033-en-simple 11/1/07 2:35 PM Page 8

PREPARATION

9

HDMI/DVI IN 1, HDMI IN 2

Connect a HDMI (DVI) connection to either input.

COMPONENT IN

Connect a component video/audio device to these
jacks.

RGB (PC)

Connect the output from a PC.

AUDIO (RGB/DVI)

Connect the audio from a PC or DTV.

SERVICE

Remote Control Port

Connect a wired remote control.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

For external control devices.

AUDIO OUT

Connect analog audio to various types of equipment.

AV (Audio/Video) IN

Connect audio/video output from an external
device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

Power Cord Socket

For operation with AC power.
Caution: Never attempt to operate the TV on DC

power.

1

11

2

3

4

5

6

8

7

9

10

MFL34797033-en-simple 11/1/07 2:35 PM Page 9

PREPARATION

10

PREPARATIONPREPARATION

REMOTE CONTROL FUNCTIONS

1 2 3

4 5 6

7809

BACK

VOL CH

MUTE

FAV

BRIGHT -

MENU

BRIGHT +

ENTER

EXIT

TIMER

R

A

TIO

S

IM

P

L

IN

K

POWER

V

C

R

TV

DVD

AUDIO

CABLE

S

T

B

MODE

TV INPUT

INPUT

When using the remote control, aim it at the remote control sensor on the TV.

MODE

MENU

BRIGHT -/ +

THUMBSTICK

(Up/Down/Left

Right/ENTER)

EXIT

TIMER

RATIO

SIMPLINK

VOLUME UP

/DOWN

MUTE

FAV

CHANNEL

UP/DOWN

— (DASH)

BACK

Select the remote’s operating mode. TV, DVD, VCR,
AUDIO, CABLE, or STB.

Control video cassette recorders or DVD players.

Displays the main menu.

Adjust the brightness on screen.

Navigate the on-screen menus and adjust the system set­tings to your preference.

Clear all on-screen displays and return to TV viewing
from any menu.

Select the amount of time before your TV turns off auto­matically.

Change the aspect ratio.

See a list of AV devices connected to TV. When you tog­gle this button, the SimpLink menu appears at the screen.

Increase/decrease the sound level.

Switch the sound on or off.

Scroll through the programmed Favorite channels.

Select available channels.

Used to enter a program number for multiple program
channels such as 2-1, 2-2, etc.

Tune to the last channel viewed.

VCR/DVD

control buttons

NUMBER button

MFL34797033-en-simple 11/1/07 2:35 PM Page 10

PREPARATION

11

PICTURE

SOUND

SAP

CC

ADJUST

Selects the factory preset picture depend on
the viewing environment.

Selects the factory preset sound for type of
program.

Analog mode: Selects MTS sound (Mono,
Stereo, or a SAP)

DTV mode: Changes the audio language.

Select a closed caption.

Adjust the screen resolution, position, size and
phase.

Inside the Sliding Cover

■

Open the battery compartment cover on the back
side and install the batteries matching correct
polarity (+ with +, - with -).

■

Install two 1.5V AA batteries. Don’t mix old or
used batteries with new ones.

■

Close cover.

■

Use a remote control up to 7 meters distance
and 30 degree (left/right) within the receiving
unit scope.

■

Dispose of used batteries in a recycle bin to
preserve environment.

B

R

I

G

H

T

-

MENU

B
R
I

G
H

T
+

POWER

V
C

R

T

V

DVD

A

U

D

I

O

CABLE

S
T

B

MODE

TV INPUT

INPUT

B

R

I

G

H

T

-

MENU

B

R
I
G

H

T
+

POWER

V
C

R

T

V

DVD

A

U

D

I

O

CABLE

S
T

B

MODE

TV INPUT

INPUT

Installing Batteries

Remote control effective range

POWER

TV INPUT

INPUT

Turns your TV or any other programmed equipment on or off, depending on the mode.

In AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources, screen returns to the
last TV channel.

External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1 and
HDMI2.

(AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources are linked automatically,
only if a device is connected.)

MFL34797033-en-simple 11/1/07 2:35 PM Page 11

1 2 3

4 5 6

7809

BACK

PICTURE

ADJUST

SOUND

SAP

CC

PREPARATION

12

PREPARATIONPREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Plasma TV Model

Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.

Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

1

2

Install the CABLE MANAGEMENT as shown.

3

CABLE MANAGEMENT

■

Here shown may be somewhat different from your TV.

MFL34797033-en-simple 11/1/07 2:35 PM Page 12

PREPARATION

13

LCD TV Model

Connect the cables as necessary.
To connect an additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT as shown.

How to remove the CABLE MANAGEMENT

GG

Hold the CABLE MANAGEMENT with both hands and
pull it backward.

CABLE MANAGEMENT

TWISTER HOLDER

GG

Do not hold the CABLE MANAGEMENT when moving
the product.

- If the product is dropped, you may be injured or the
product may be broken.

NOTE

!

1

2

Bundle the cables using the supplied TWISTER HOLDER.
(This feature is not available for all models.)

3

MFL34797033-en-simple 11/1/07 2:35 PM Page 13

PREPARATION

14

PREPARATIONPREPARATION

ATTACHING THE TV TO A WALL

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,
potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

Plasma TV Model LCD TV Model

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to
the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (not provided as parts of the product, must pur­chase separately) to tie the product. It is safer to tie the rope so it
becomes horizontal between the wall and the product.

For proper ventilation, allow a clearance of 4inches on all four sides from the wall.

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

GG

Ensure adequate ventilation by following the clearance recommendations.

CAUTION

Plasma TV Model LCD TV Model

DESKTOP PEDESTAL INSTALLATION

■

This feature is not available for all models.

■

Here shown may be somewhat different from your TV.

MFL34797033-en-simple 11/1/07 2:35 PM Page 14

PREPARATION

15

STAND INSTALLATION (Only 32LC7D/7DC, 37LC7D)

Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.

Assemble the product stand with the product as
shown.

Securely install the 4 bolts provided.

1

2

3

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.

GG

Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

NOTE

!

R

R

Plasma TV Model LCD TV Model

600 mm

400 mm

400 mm

(32LC7D/7DC only: 100 mm)

600 mm

(32LC7D/7DC only: 200 mm)

MFL34797033-en-simple 1/9/08 3:15 PM Page 15

PREPARATION

16

PREPARATIONPREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wall
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wire
when connecting the antenna.

Copper Wire

GG

The TV will let you know when the analog, cable, and digital channel scans are complete.

NOTE

!

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal
Amplifier

VHF

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

MFL34797033-en-simple 11/1/07 2:35 PM Page 16

EXTERNAL EQUIPMENT SETUP

17

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

/DVI IN

AUDIO

(RGB/DVI)

RGB(PC)

R

CON

R

(CONT

( )

S-

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

SERVICE

When connecting Component cable

1 2

1. How to connect

Connect the video outputs (Y, P B, PR

)

of the digital set

top box to the

CC OO MMPP OONN EENNTT IINN VVIIDD EEOO 11

jacks on
the set. Match the jack colors (Y = green, PB = blue, and
P

R = red).

Connect the audio output of the digital set-top box to
the

CC OO MMPP OONN EENNTT IINN AA UUDD IIOO 11

jacks on the set.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select

CC oo mmpp oo nneenntt 11

input source by using the

II NN PPUUTT

button on the remote control.

■

If connected to

CC OO MMPPOO NN EENNTT IINN22

input, select

CC oo mmpp oonneenntt 22

input source.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

Signal

480i

480p

720 p

10 8 0 i

10 8 0 p

Component 1/2

Yes

Yes

Yes

Yes

Yes

HDMI1/DVI,

HDMI2

No

Yes

Yes

Yes

Yes

Y, CB/PB, CR/PR

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67. 432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

MFL34797033-en-simple 11/1/07 2:35 PM Page 17

EXTERNAL EQUIPMENT SETUP

18

EXTERNAL EQUIPMENT SETUP

When connecting Component cable

R

(CONT

( )

S-

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

I/DVI IN

Connect the video outputs (Y, P B, PR

)

of the DVD to the

CC OO MMPP OONN EENNTT IINN VVII DD EEOO11

jacks on the set.
Match the jack colors
(

Y = green, P

B = blue, and PR = red

)

.

Connect the audio outputs of the DVD to the
CC OO MMPP OONN EENNTT IINN AA UU DD IIOO 11

jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

CC oo mmpp oo nneenntt 11

input source by using the

II NN PPUUTT

button on the remote control.

■

If connected to

CC OO MMPPOO NN EENNTT IINN 22

input, select

CC oo mmpp oonneenntt 22

input source.

■

Refer to the DVD player's manual for operating instructions.

2

1

1 2

DVD SETUP

RGB IN

COMPONENT I

AUD

(RGB/

RGB(PC)

1

2

VIDEO

( )

HDMI IN

HDMI/DVI IN

1

2

HDMI-DVD OUTPUT

1

When connecting HDMI cable

Connect the HDMI output of the DVD to the
HHDDMMII // DD VVII IINN 11

or

HHDDMMII IINN 22

jack on the set.

No separated audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select

HHDDMMII11

or

HHDDMMII22

input source by using the

II NN PPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

MFL34797033-en-simple 11/1/07 2:35 PM Page 18

EXTERNAL EQUIPMENT SETUP

19

VCR SETUP

GG

Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.

CAUTION

When connecting with a RCA cable

GG

The picture quality is improved: compared to normal
composite (RCA cable) input.

NOTE

!

T IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

( )

(

)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connect the

AAUUDD IIOO/VVII DD EEOO

jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.

)

■

Select

AAVV11

input source by using the

II NN PPUUTT

button on

the remote control.

■

If connected to

AAVV IINN22

, select

AAVV 22

input source.

When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to the
SS --VVIIDD EEOO

input on the set.

Connect the audio outputs of the VCR to the

AAUUDD IIOO

input jacks on the set.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select

AAVV11

input source by using the

II NN PPUUTT

button on the

remote control.

■

If connected to

AAVV IINN22

, select

AAVV 22

input source.

1

2

1

GG

If you have a mono VCR, connect the audio cable from the VCR to the

AAUU DD IIOO LL//MMOONNOO

jack of the set.

NOTE

!

1

1

2

MFL34797033-en-simple 11/1/07 2:35 PM Page 19

EXTERNAL EQUIPMENT SETUP

20

EXTERNAL EQUIPMENT SETUP

PC SETUP

When connecting HDMI to DVI cable

COMPONENT IN

ANTENNA/

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

AUDIO

VIDEO

MONO

( )

A

S-VIDEO

HDMI IN

HDMI/DVI IN

1

2

RGB IN

AUDIO

(RGB/DVI)

DVI-PC OUTPUT

RGB(PC)

( )

AUDIO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

1

2

Connect the DVI output of the PC to the

HHDDMMII //DD VV II

II NN 11

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO

((

RRGGBB//DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

HHDDMMII11

input source by using the

II NN PPUUTT

button on

the remote control.

2

1

When connecting D-sub 15pin cable

COMPONENT IN

1

2

RS-232C IN

(CONTROL & SERV

VIDEO

AUDIO

VI

( )

S-VIDEO

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

RGB OUTPUT AUDIO

REMOTE

CONTROL IN

SERVICE

HDMI IN

HDMI/DVI IN

1

2

Connect the RGB output of the PC to the

RRGGBB ((PP CC

))

jack on the set.

Connect the PC audio output to the

AAUUDDII OO ((RRGGBB//DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

RRGGBB--PPCC

input source by using the

II NN PPUUTT

button

on the remote control.

2

1

1

2

Supported Display Specifications

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47. 776 59 .87

47. 720 59. 799

47. 130 59. 65

Resolution

720x400

1360x768

640x350

640x480

800x600
1024x768
1280x768

1366x768

RGB-PC, HDMI1/DVI-PC mode

* RGB-PC mode only

* LCD TV only

GG

Depending on graphic
card and signal status,
there can be some
shaking to find best
picture in a little time.

NOTE

!

MFL34797033-en-simple 11/1/07 2:35 PM Page 20

WATCHING TV

21

TURNING ON TV

WATCHING TV

NOTE

!

GG

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

First, connect power cord correctly.
At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the ,

IINNPPUUTT,CCHH ((

DD

or

EE

))

button on the TV or press the

PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((

DD

or

EE

)), NNuummbbeerr ((00~99 ))

button on the remote control.

Select the viewing source by using the

TTVV IINNPPUUTT, IINNPPUUTT

button on the

remote control.

■

This TV is programmed to remember which power state it was last set to,
even if the power cord is out.

When finished using the TV, press the

PPOOWWEERR

button on the remote con-

trol. The TV reverts to standby mode.

POWER

V

C

R

TV

DVD

TV INPUT

INPUT

SAP

SOUND

PICTURE

CC

123

456

7809

BACK

VOL CH

MUTE

FAV

EXIT

TIM

E

R

R

A

T

IO

S

IM

P

L

IN

K

1

2

3

SAP

SOUND

PICTURE

CC

123

456

7809

BACK

VOL CH

MUTE

FAV

EXIT

T

IM

E

R

R

A

TIO

S

IM

P

L

IN

K

Press the

CCHH ((

DD

or

EE

))

or

NNUUMMBBEERR

buttons to select a channel number.

1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the

VVOOLL ((

DD

or

EE

))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

or

VVOOLL ((

DD

or

EE

))

button.

123

456

VOL CH

MUTE

FAV

EXIT

T

IM

E

R

R

A

TIO

S

IM

P

L

IN

K

Adjust the volume to suit your personal preference.

1

2

3

MFL34797033-en-simple 11/1/07 2:35 PM Page 21

WATCHING TV

22

WATCHING TV

CHANNEL SEARCH

Press the

MMEENNUU

button and then use

DD

or

EE

button

to select the

SS EETTUUPP

menu.

Press the

GG

button and then use

DD

or

EE

button to

select

AAuutt oo TT uunn iinn gg

.

Press the

EE NN TT EERR

button to begin the channel search.

Allow

AAuutt oo TT uunn iinn gg

to complete the channel search

cycle for

AANN TTEENN NN AA

and

CC AABBLL EE

.

Automatically finds all channels available through antenna
or cable inputs, and stores them in memory on the channel
list.

Run Auto Tuning again after any Antenna/Cable connection
changes.

A password is required to gain access to Auto Tuning menu
if the Lock System is turned on.

2

3

1

1

2

3

BRIGHT -

B

R

IG

H

T

+

ENTER

T

IM

E

R

R

A

T

IO

S

IM

P

L

IN

K

POWER

VC

R

TV

DVD

AUDIO

CABLE

S

TB

MODE

TV INPUT

INPUT

EXIT

MENU

Auto Scan (Auto Tuning)

Auto Tuning

G

Manual Tuning

Channel Edit

Selection ( Gor ) leads you to
the Auto Tuning screen.

Auto Tuning

Manual Tuning

Channel Edit

Selection ( Gor ) leads
you to the Auto Tuning
screen.

NOTE

!

Analog TV antenna
Digital DTV antenna
Analog CATV cable

Digital CADTV cable

Processing Auto Tuning...

DTV Ch.23

Found Channel(s): 16

Press to stop the current
scan and start ANALOG
ANTENNA channel scan.

MENU Prev

Next

Auto Tuning

Manual Tuning

Channel Edit

MFL34797033-en-simple 11/1/07 2:35 PM Page 22

WATCHING TV

23

ON-SCREEN MENUS SELECTION

Press the

MMEENNUU

button and then use

DD

or

EE

button to select the each menu.

Press the

GG

button and then use

DD EE FF GG

button to display the available menus.

Your TV's OSD (On Screen Display)may differ slightly from what is shown in this manual.

2

1

■

All available TV channels are searched and stored
automatically.

■

User can do manual channel selection and add or
delete individual channels.

■

You can add or delete in the channel list.

Channel Edit

Manual Tuning

Auto Tuning

SETUP

Auto Tuning

Manual Tuning

Channel Edit

■

Select the preset value in the Picture Mode menu
based on the program category: Dynamic, Standard,
Mild, User1, User2.

■

Choose one of three automatic color adjustments
: Cool, Medium, Warm, User

■

It is LG Electronic’s unique picture improving tech­nology to display a real HD source through an
advanced digital signal processing algorithm.

■

Select Auto or Manual (XD Contrast, XD Color, XD Noise).

■

Cinema 3:2 Mode (On, Off)
Set up the TV for the best picture appearance for
viewing movies.

■

Black Level (Low, High)
Adjusting the contrast and the brightness of the
screen using the black level of the screen.

■

Select the desired picture format.
: Set by program, 4:3, 16:9, Zoom1, Zoom2, Just Scan.

■

Use to quickly reset all the Picture menu options to
their original factory preset values.

■

Adjust the screen Resolution, Position, Size, Phase,
Reset.

XD

Advanced

Picture Reset

Color Temperature

Picture Mode

PICTURE

Picture Mode : User1

Color Temperature : Cool

XD

Advanced

Aspect Ratio : 16:9

Picture Reset

Screen

Aspect Ratio

Screen

MFL34797033-en-simple 11/1/07 2:35 PM Page 23

WATCHING TV

24

WATCHING TV

AUDIO

Sound Mode : Standard

Auto Volume : On

Balance : 0

TV Speaker : On

■

Sound Mode lets you enjoy the best sound with­out any special adjustment.
: Standard, Music, Movie, Sports and User

■

Scans for changes in sound levels during commer­cials, then adjusts the sound to match the specified
audio level.

■

Adjust the left/right sound of speaker.

■

Turn the TV speaker On or off.

Balance

TV Speaker

Auto Volume

Sound Mode

TIME

Clo ck : Oct 19, 2006, 03:44 AM

Off Time : Off

On Time : Off

Sleep Time : Off

Auto Sleep : Off

■

Auto: The time is set automatically from a digital
channel signal.
Select your viewing area time zone.
Select Auto, Off, On depending on whether or
not your viewing area observes Daylight Saving
time.

■

Manual: Set the clock manually.

■

Select On or Off.

■

Select On or Off.

■

Select the amount of time before your TV turns off
automatically: Off, 10, 20, 30, 60, 90, 120, 180,
240 .

■

TV will be automatically turned off, in case of no sig­nal for 10 minutes.

Off Time

On Time

Sleep Time

Clock

Auto Sleep

MFL34797033-en-simple 11/1/07 2:35 PM Page 24

WATCHING TV

25

■

Select your desired language for on screen menus
: English, Spanish, French.

■

Set a label to each input source.

■

Control and play other AV devices connected to the
TV through HDMI cable without additional cables
and settings.

■

This feature can be used to prevent unauthorized
viewing by locking out the front panel controls.

■

Mode: When selecting Off, Submenus for Analog,
DTV, and Digital Option become disabled.

■

Analog: CC1~ CC4 , Text1~ Text4.

■

Digital: Service1~ Service6

■

Digital Option: Customize the DTV/CADTV captions
that appear on your screen.

■

Use it to minimize any fixed image on the screen.
: Normal, Orbiter, Inversion, White Wash.

■

Reduces the plasma display power consumption.

■

Choose the desired TV ID number.

SimpLink

key Lock

ISM Method

Low Power

Caption

Input Label

Language

■

Select On or Off.

■

Change the password.

■

Select a channel number that you wish to block.

■

Blocks movies according to the movie ratings limits
specified.

■

Prevents children from watching certain children's
TV programs, according to the ratings limit set.

■

Based on the ratings, blocks certain TV programs
that you and your family do not want to view.

■

Selecting canadian english language rating system.

■

Selecting canadian french language rating system.

■

This function may become available in the future and
will be available only for digital channel signal.

■

Enables you to select a source to block from the
external source devices you have hooked up.

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

TV Rating-English

TV Rating-French

Downloadable

Rating

Input Block

Set Password

Lock System

For USA

OPTION

LOCK

Language : English

Input Label

SimpLink : Off

Key Lock : Off

Caption : Off

ISM Method : Orbiter

Low Power : Off

Set ID : 1

Set ID

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

For Canada

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Plasma TV model only

MFL34797033-en-simple 11/1/07 2:35 PM Page 25

APPENDIX

26

APPENDIX

TROUBLESHOOTING

TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy..

TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

■

Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.

■

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

■

Ensure that the correct remote operating mode is set: TV, VCR etc.

■

Install new batteries.

■

Is the sleep timer set?

■

Check the power control settings. Power interrupted.

■

No broadcast on station tuned with Auto off activated.

■

Check whether the product is turned on.

■

Try another channel. The problem may be with the broadcast.

■

Is the power cord inserted into wall power outlet?

■

Check your antenna direction and/or location.

■

Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.

■

This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.

■

Adjust Color in menu option.

■

Keep a sufficient distance between the product and the VCR.

■

Try another channel. The problem may be with the broadcast.

■

Are the video cables installed properly?

■

Activate any function to restore the brightness of the picture.

■

Check for local interference such as an electrical appliance or power tool.

■

Station or cable product experiencing problems, tune to another station.

■

Station signal is weak, reorient antenna to receive weaker station.

■

Check for sources of possible interference.

■

Check antenna (Change the direction of the antenna).

MFL34797033-en-simple 11/1/07 2:35 PM Page 26

APPENDIX

27

TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd))

■

Adjust resolution, horizontal frequency, or vertical frequency.

■

Check the input source.

■

Work the Auto configure or adjust clock, phase, or H/V position. (Option)

■

Check the signal cable.

■

Reinstall the PC video card.

The signal is out of range

Screen color is unstable

or single color

Vertical bar or stripe on

background &

Horizontal Noise &

Incorrect position

■

Press the VOL or VOLUME button.

■

Sound muted? Press MUTE button.

■

Try another channel. The problem may be with the broadcast.

■

Are the audio cables installed properly?

■

Adjust Balance in menu option.

■

A change in ambient humidity or temperature may result in an unusual noise
when the product is turned on or off and does not indicate a fault with the
product.

Picture OK & No sound

Unusual sound from

inside

the product

No output from one

of the speakers

TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk..

MFL34797033-en-simple 11/1/07 2:35 PM Page 27

APPENDIX

28

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can
enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

■

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

■

Please be sure not to use a wet cloth.

Extended Absence

GG

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug
the power cord to protect against possible damage from lightning or power surges.

CAUTION

2

1

MFL34797033-en-simple 11/1/07 2:35 PM Page 28

APPENDIX

29

PRODUCT SPECIFICATIONS

■

The specifications shown above may be changed without prior notice for quality improvement.

MODELS

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

32 ~ 104°F (0 ~ 40°C)

Less than 80%

-4 ~ 140°F (-20 ~ 60°C)

Less than 85%

Dimensions

(Width x Height x Depth)

Weight

Power requirement

Television System

Program Coverage

External Antenna Impedance

Environment condition

Including stand

Excluding stand

including stand

excluding stand

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

32LC7D (32LC7D-UK)

32LC7DC (32LC7DC-UK)

37LC7D

(37LC7D-UK)

42LC7D

(42LC7D-UK)

31.8 x 23.9x 9.8 inches

806.6 x 606.5 x 249.0mm

31.8 x 21.7 x 3.1 inches

806.6 x 552.3 x 79.0 mm

30.2 pounds / 13.7 kg

24.7 pounds / 11.2 kg

36.5 x 27.3 x 11.0 inches

927.0 x 692.8 x 280.5 mm

36.5 x24.8 x 3.5 inches

927.0 x 630.0 x 88.0 mm

44.1 pounds / 20.0 kg

35.3 pounds / 16.0 kg

40.7 x 29.5 x 11.3 inches

1033.4 x 750.0 x 287.6 mm

40.7 x 27.0x 3.5 inches

1033.4 x 686.8 x 88.5 mm

54.9 pounds / 24.9 kg

45.0 pounds / 20.4 kg

MODELS

AC100-240V ~ 50/60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

32 ~ 104°F (0 ~ 40°C)

Less than 80%

-4 ~ 140°F (-20 ~ 60°C)

Less than 85%

Dimensions

(Width x Height x Depth)

Weight

Power requirement

Television System

Program Coverage

External Antenna Impedance

Environment condition

Including stand

Excluding stand

including stand

excluding stand

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

42PC5D (42PC5D-UL)

42PC5DC (42PC5DC-UL)

50PC5D (50PC5D-UL)

50PC5DC (50PC5DC-UL)

41.3 x 30.2 x 12.2 inches

1048.0 x 766.0 x 310.0 mm

41.3 x 28.1 x 3.3 inches

1048.0 x 713.0 x 83.5 mm

61.7 pounds / 28.0 kg

54.2 pounds / 24.6 kg

48.9 x 34.9 x 14.6 inches

1242.0 x 887.6 x 370.0 mm

48.9 x 32.6 x 3.5 inches

1242.0 x 827.2 x 88.0 mm

86.6 pounds / 39.3 kg

76.3 pounds / 34.6 kg

MFL34797033-en-simple 11/1/07 2:35 PM Page 29

APPENDIX

30

OPEN SOURCE SOFTWARE NOTICE

APPENDIX

The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL
License Agreements:

GPL EXECUTABLES:

■

Linux kernel 2.6.12

■

busybox

LGPL LIBRARIES:

■

uclibc

MPL LIBRARIES:

■

Nanox

LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing
such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at:
[e-mail]

This offer is valid for a period of three(3) years from the date of the distribution of this product by LG
Electronics.

You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product.

■

This software is based in part on the work of the Independent JPEG Group.

■

This software includes the Zlib compression library, developed by Jean-loup Gailly and Mark Adler.
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler

MFL34797033-en-simple 11/1/07 2:35 PM Page 30

MFL34797033-en-simple 11/1/07 2:35 PM Page 31

MFL34797033-en-simple 11/1/07 2:35 PM Page 32