LG 50PB6600-ZA, 50PB660V-ZA, 50PB660V-ZD, 50PB6609-ZD, 60PB6600-ZA Owners Manual

...

Drawn Approved

Signature

Sungho. Jo JongOk.Kim

MMM/DD/YYYY

Feb/03/2014 Feb/03/2014

50PB660V-ZD LG MFL68026906 EK 50PB660V-ZD (1402-REV00)

:LGEAK :LGEKR :LGERS :LGEAZ :LGEMA :LGESY :LGEEG :LGEMX :LGETH :LGEIL :LGEND :LGEVN :LGEIN :LGERA :LGEWR :LGEAS

(Revision number)

2. Printing Specification

Checked

Feb/03/2014

:Part number

1. Model Description

Printing specification

Mira.Woo

Printed in Poland

Printed in Kazakhstan

Printed in Brazil

:4. Bindery

:5. Language

:6. Number of pages

:Model name

:2nd, 3rd Suffix

:Brand name

:Product name

:1. Trim size (Format)

2. Printing colors

: • Cover

: • Inside

Printed in Korea

: • Inside

Rev. Number

MMM/DD/YYYY

ENG (1)

148 mm x 210 mm (A5)

1 Color (Black)

Uncoated, wood-free paper 60 g/㎡

Saddle stitching

3. Origin Notification

4. Changes

Printed in Mexico

Printed in Egypt

Printed in India

Printed in Algeria

3. Stock (Paper)

: • Cover

Printed in Mexico

Printed in Indonesia

Printed in Russia

Printed in Poland

Signature

Change Contents

ECO Number

T E

“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

Especially, Part should be followed and controlled the following specification.

(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

Printed in China

Printed in Thailand

Printed in Vietnam

Front Back

(ENG) Cover

P/No. 2 … 32 Blank Blank Blank (ENG)

:Total pages

36 pages

:Part number

MFL68026906

Pagination sheet

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating your set and retain it for future reference.

PB66** PB69**

*MFL68026906*

P/NO : MFL68026906 (1402-REV00) Printed in Korea

www.lg.com

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

LICENSES

ENGLISH

ENG

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.

This offer is valid for three (3) years from the date on which you purchased the product.

EXTERNAL CONTROL DEVICE SETUP

To obtain the external control device setup information, please visit www.lg.com

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yDo not place the TV and/or remote control in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a bathroom

- Near any heat source such as stoves and other devices that produce heat

- Near kitchen counters or humidifiers where they can easily be exposed to steam or

oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or product deformation.

yDo not place the product where it might be exposed to dust.

This may cause a fire hazard.

yMains Plug is the TV connecting/disconnecting device to AC mains electric supply. This

plug must remain readily attached and operable when TV is in use.

yDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or

covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.

yMake sure to connect Mains cable to compliant AC mains socket with Grounded earth

pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.

ENGENGLISH

yInsert power cable plug completely into wall socket otherwise if not secured completely

into socket, fire ignition may break out.

yEnsure the power cord does not come into contact with hot objects such as a heater.

This may cause a fire or an electric shock hazard.

yDo not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

SAFETY INSTRUCTIONS

Desiccant

ENGLISH

ENG

yBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

yWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of

TV as to not create possibility of electric shock/fire hazard.

yDo not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

yDo not drop the product or let it fall over when connecting external devices.

Otherwise, this may result in injury or damage to the product.

yKeep the anti-moisture packing material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yDispose of used batteries carefully to ensure that a small child does not consume them.

Please seek Doctor- Medical Attention immediately if child consumes batteries.

yDo not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver)

between power cable plug and input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal. You may be electrocuted. (Depending on model)

yDo not put or store inflammable substances near the product.

There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.

yDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the

product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

SAFETY INSTRUCTIONS

yDo not spray water on the product or scrub with an inflammable substance (thinner or

benzene). Fire or electric shock accident can occur.

yDo not allow any impact, shock or any objects to fall into the unit, and do not drop

anything onto the screen. You may be injured or the product can be damaged.

yNever touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

yNever touch the wall outlet when there is leakage of gas, open the windows and

ventilate. It may cause a fire or a burn by a spark.

yDo not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur. Contact the service centre for check, calibration or repair.

yIf any of the following occur, unplug the product immediately and contact your local

service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange smell

This may result in fire or electric shock.

yUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long

period of time. Accumulated dust can cause fire hazard and insulation deterioration can cause electric leakage/shock/fire.

yApparatus shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the apparatus.

ENGENGLISH

yDo not install this product on a wall if it could be exposed to oil or oil mist.

This may damage the product and cause it to fall.

ENGLISH

ENG

SAFETY INSTRUCTIONS

CAUTION

yInstall the product where no radio wave occurs.

yThere should be enough distance between an outside antenna and power lines to keep

the former from touching the latter even when the antenna falls. This may cause an electric shock.

yDo not install the product on places such as unstable shelves or inclined surfaces. Also

avoid places where there is vibration or where the product cannot be fully supported. Otherwise, the product may fall or flip over, which may cause injury or damage to the product.

yIf you install the TV on a stand, you need to take actions to prevent the product from

overturning. Otherwise, the product may fall over, which may cause injury.

yIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the

back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

yOnly use the attachments / accessories specified by the manufacturer.

yWhen installing the antenna, consult with a qualified service technician. If not installed

by a qualified technician, this may create a fire hazard or an electric shock hazard.

yWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen

size when watching TV. If you watch TV for a long period of time, this may cause blurred vision.

yOnly use the specified type of battery.

This could cause damage to the remote control.

yDo not mix new batteries with old batteries.

This may cause the batteries to overheat and leak.

yBatteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open

fireplace and electric heaters .

yDo not place non-rechargeable batteries in charging device.

SAFETY INSTRUCTIONS

yMake sure there are no objects between the remote control and its sensor.

ySignal from Remote Control can be interrupted due to external/internal lighting eg

Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.

yWhen connecting external devices such as video game consoles, make sure the

connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

yDo not turn the product On/Off by plugging-in or unplugging the power plug to the wall

outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock.

yPlease follow the installation instructions below to prevent the product from overheating.

- The distance between the product and the wall should be more than 10 cm.

- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a

cupboard).

- Do not install the product on a carpet or cushion.

- Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in fire.

yTake care not to touch the ventilation openings when watching the TV for long periods

as the ventilation openings may become hot. This does not affect the operation or performance of the product.

ENGENGLISH

yPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration,

unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

yPrevent dust collecting on the power plug pins or outlet.

This may cause a fire hazard.

yProtect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

yDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or

pen, or make a scratch on it, as it may cause damage to screen.

SAFETY INSTRUCTIONS

ENGLISH

ENG

yAvoid touching the screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary or permanent distortion/damage to screen.

yWhen cleaning the product and its components, unplug the power first and wipe it with

a soft cloth. Applying excessive force may cause scratches or discolouration. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).

yAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if

you turn off this unit by SWITCH.

yWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t

pull at the cord to unplug the power cord from the power board, as this could be hazardous.

yWhen moving the product, make sure you turn the power off first. Then, unplug the

power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.

yWhen moving or unpacking the product, work in pairs because the product is heavy.

Otherwise, this may result in injury.

yContact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

yRefer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yIf the product feels cold to the touch, there may be a small “flicker” when it is turned on.

This is normal, there is nothing wrong with product.

yThe panel is a high technology display product with resolution of two million to six

million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

SAFETY INSTRUCTIONS

yYou may find different brightness and colour of the panel depending on your viewing

position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. product performance, and it is not malfunction.

yDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a

prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma). Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.

It is not related with the

ENGENGLISH

SAFETY INSTRUCTIONS

Viewing 3D Imaging

ENGLISH

(Only 3D models)

ENG

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period

of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

ySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light

or particular pattern from 3D contents.

yDo not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac

disorder, or blood pressure disease, etc.

y3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double

images or discomfort in viewing may be experienced.

yIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing

depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents.

Symptoms which require discontinuation or refraining from watching 3D contents

yDo not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. yWhen these symptoms are experienced, stop using/watching 3D contents and get enough rest until the

symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

+ 26 hidden pages