LG 49UF640T Owner's Manual [es]

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

43UF6400	55UF6450	43UF640T	55UF645T
49UF6400	65UF6450	49UF640T	65UF645T

*MFL68741515*	www.lg.com

P/No : MFL68741515 (1508-REV01)

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

		The exclamation point within an
		equilateral triangle is intended to alert the
		user to the presence of important operating
<![if ! IE]> <![endif]>ENGLISH		and maintenance (servicing) instructions in
		the literature accompanying the appliance.
		WARNING/CAUTION
		- TO REDUCE THE RISK OF FIRE AND ELECTRIC
		SHOCK, DO NOT EXPOSE THIS PRODUCT TO
		RAIN OR MOISTURE.
		WARNING
		If you ignore the warning message, you may
		be seriously injured or there is a possibility of
		accident or death.
		CAUTION
		If you ignore the caution message, you may
		be slightly injured or the product may be
		damaged.
		NOTE
		The note helps you understand and use the
		product safely. Please read the note carefully
		before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

••Do not use this apparatus near water.

••Clean only with dry cloth.

••Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

••Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

••Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

••Only use attachments/accessories specified by the manufacturer.

2

••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

••Unplug this apparatus during lightning storms or when unused for long periods of time.

••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••CAUTION concerning the Power Cord (Can differ by country):

Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

••Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet).

If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by

connecting it to telephone wires, lightning rods, or gas pipes.

Power

Circuit Supply

Breaker

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp

(NEC Section 810-20)

Electric Service

Grounding Conductor

Equipment

(NEC Section 810-21)

Ground Clamp

Power Service Grounding

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

••Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

••Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper).

This may result in product malfunction.

4

••Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the performance and reliability of the TV.

••Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

••Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

Preparing

NOTE

	••Image shown may differ from your TV.
	••Your TV’s OSD (On Screen Display) may differ
	slightly from that shown in this manual.
	••The available menus and options may differ from
	the input source or product model that you are
	using.
	••New features may be added to this TV in the
	future.
	••The items supplied with your product may vary
	depending upon the model.
	••Product specifications or contents of this manual
	may be changed without prior notice due to
	upgrade of product functions.
	••For an optimal connection, HDMI cables and
	USB devices should have bezels less than 10 mm
	thick and 18 mm width.
	••Use an extension cable that supports USB 2.0 if
	the USB cable or USB flash drive does not fit into
	your TV’s USB port.
	••Use a certified cable with the HDMI logo
	attached. If you do not use a certified HDMI
	cable, the screen may not display or a		<![if ! IE]> <![endif]>ENGLISH
	connection error may occur.
	••Recommended HDMI cable types (3 m or less)
	-- High-Speed HDMI®/ TM cable
	-- High-Speed HDMI ®/ TM cable with Ethernet
	A	A
	*A	10 mm
	*B	18 mm

CAUTION

••Do not use any unapproved items to ensure the safety and product’s lifespan.

••Any damages or injuries by using unapproved items are not covered by the warranty.

••Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

••When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

••Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

••Do not fasten the screws with excessive force; otherwise, they may be worn out and become loose.

5

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items.

These devices work only with certain models.

The model name or design may be changed due to the manufacturer’s circumstances or policies.

(Depending upon model)

AN-VC550	AN-MR6**	LG Audio
Smart Camera	Magic Remote	Device

AN-WF500

Wi-Fi/Bluetooth

Dongle

Maintenance

Cleaning Your TV

Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan.

<![if ! IE]> <![endif]>ENGLISH		CAUTION
		long time, disconnect the power cord from the
		••Before cleaning, turn the power off and
		disconnect the power cord and all other cables.
		••When the TV is left unattended or unused for a
		wall outlet to prevent possible damage from
		lightning or power surges.

Screen, Frame, Cabinet, and Stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.

CAUTION

••Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

••Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

••Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power Cord

Remove the accumulated dust or dirt on the power cord regularly.

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

••It is recommended to move the TV in the box or packing material that the TV originally came in.

••Before moving or lifting the TV, disconnect the power cord and all cables.

••When holding the TV, the screen should face away from you to avoid damage.

••Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

••Use at least two people to move

a large TV.

••When transporting the TV by

hand, hold the TV as shown in the following illustration.

••When transporting the TV, do not expose the TV to jolts or excessive vibration.

••When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

CAUTION

••Avoid touching the screen at all times, as this may result in damage to the screen.

••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

••Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

6

Using the Joystick Button

(Depending upon model)

(Image shown may differ from your TV.)

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

NOTE

43/49UF6400, 43/49UF640T does not have a Joystick button but has only a power On/Off button.

Joystick Button

Basic Functions

When the TV is turned off,

Power On place your finger on the joystick button, press it once,

and release it.

When the TV is turned on, place your finger on the joystick button, press it once

Power Off for a few seconds, and release it. All running apps will close and any recording in progress will stop.

If you place your finger over Volume the joystick button and move Control it left or right, you can adjust

the volume level.

If you place your finger over Channels the joystick button and move Control it up or down, you can scroll

through the saved channels.

NOTE

•With your finger over the joystick button, move it up, down, left, or right. Be careful not to press the joystick button. If you press the joystick button first, you may not be able to adjust

the volume level and/or scroll through saved channels.

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can adjust the menu items moving the joystick button up, down, left, or right.

Turns the power off.

Accesses the quick settings.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Mounting on a Table

(Image shown may differ from your TV.)

1Lift and tilt the TV into its upright position on a table.

-Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm
10 cm
10	cm

2 Connect the power cord to a wall outlet.

CAUTION

•Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Securing the TV to a Wall	<![if ! IE]> <![endif]>ENGLISH
(optional)
(Depending upon model)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

7

CAUTION

••Make sure that children do not climb on or hang on the TV.

NOTE

••Use a platform or cabinet that is strong and large enough to support the TV securely.

••Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting on a Wall

		An optional wall mount can be used with your
		LG Television. Consult with your local dealer for
		a wall mount that supports the VESA standard
		used by your TV model. Carefully attach the wall
		mount bracket at the rear of the TV. Install the wall
		mount bracket on a solid wall perpendicular to the
		floor. If you are attaching the TV to other building
		materials, please contact qualified personnel to
		install the wall mount. Detailed instructions will
		be included with the wall mount. We recommend
		that you use an LG brand wall mount. The LG wall
<![if ! IE]> <![endif]>ENGLISH		mount is easy to adjust or to connect the cables.
		When you do not use LG’s wall mount bracket,
		use a wall mount bracket where the device is
		adequately secured to the wall with enough space
		to allow connectivity to external devices. If you are
		using a non-adjustable mount, attach the mount
		to the wall. Attach the cables to the TV first, then
		attach the TV to the mount.
				10 cm
		10 cm			10 cm
				10 cm
		Make sure to use screws and wall mounts that
		meet the VESA standard. Standard dimensions for
		the wall mount kits are described in the following
		table.
		Model	43UF6400			49UF6400
			43UF640T			55UF6450
						49UF640T
						55UF645T
		VESA (A x B)	200 x 200			300 x 300
		Standard screw	M6			M6
		Number of	4			4
		screws
		Wall mount	MSW240			MSW240
		bracket (optional)	LSW240B			LSW350B

	Model	65UF6450
		65UF645T
	VESA (A x B)	300 x 300
	Standard screw	M6
	Number of	4
	screws
	Wall mount	LSW350B
	bracket (optional)

A

B

CAUTION

••Disconnect the power before moving or installing the TV. Otherwise electric shock may occur.

••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

••If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

••Do not overtighten the screws as this may cause damage to the TV and void your warranty.

••Use the screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

••Use the screws that are listed in the VESA standard screw specifications.

••The wall mount kit includes an installation

manual and necessary parts.

••The wall mount bracket is optional. You can obtain additional accessories from your local dealer.

••The length of screws may differ depending upon the wall mount. Make sure to use the proper length.

••For more information, refer to the manual supplied with the wall mount.

8

Connections (Notifications)

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

For more information on an external device’s connection, refer to the manual provided with

each device.

NOTE

••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

••The external device connections shown may differ slightly from illustrations in this manual.

••Connect external devices to the TV regardless of the order of the TV port.

••If you connect a gaming device to the TV, use the cable supplied with the gaming device.

••Refer to the external equipment’s manual for operating instructions.

••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC

output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

••Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

••Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV. The RF cable may not be supplied, depending upon the model.

CAUTION

••Make sure not to bend the copper wire of the RF cable.

Copper wire

••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

••To improve the picture quality in a poor signal area, purchase a signal amplifier.

••Use a signal splitter to use 2 TVs or more.

••If the antenna is not installed properly, contact your dealer for assistance.

••DTV Audio Supported Codec: MPEG, AAC, HE-AAC, Dolby Digital.

••Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal.

••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

(Depending upon model)

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided.

NOTE

• j j j Picture j HDMI ULTRA HD Deep Color:

-- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

-- Off: Support 4K @ 50/60 Hz (4:2:0)

••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case,

connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color

setting to Off.

-- This feature is available only on certain models which support HDMI ULTRA HD Deep Color.

••HDMI Audio Supported Format: DTS (44.1 kHz / 48 kHz),

AC3 (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Depending upon model)

Remote Control

(Image shown may differ from your TV.)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery

to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s

remote sensor.	9

<![if ! IE]>

<![endif]>ENGLISH

CAUTION

••Do not mix old and new batteries, as this may damage the remote control.

Type 1		Type 2

A

A

(POWER) Turns the TV on or off.

TV Returns to the last TV channel. (Depending upon model)

	<![if ! IE]> <![endif]>ENGLISH	TV/RAD	Toggles between Radio, TV, CATV,
		and DTV. (Depending upon model)
		Input Changes the input source.
			Accesses the quick menu.

RATIO Resizes an image.

CAPTION Activates or deactivates the subtitles. (Depending upon model)

SUBTITLE Recalls your preferred subtitle in digital mode. (Depending upon model)

Number button Enters numbers.

- (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Depending upon model)

LIST Accesses the saved channel list.

Alternates between the two last channels selected (pressing repeatedly).

VOL Adjusts the volume level. FAV Accesses your favorite channel list.

INFO Shows information on the current program. MUTE Mutes all sounds.

CH Scrolls through the saved channels. PAGE Moves to the previous or next screen.

Type 1, 2

B

B

RECENT Shows the previous history. (Home) Accesses the Home menu. MY APPS Shows the list of Apps.

GUIDE Displays the program event according to time scheduler.

PICTURE Changes the picture mode.

Navigation buttons (up/down/left/right) Scrolls through menus or options.

OKSelects menus or options and confirms your input.

BACK Returns to the previous screen.

EXIT Clears all on-screen displays and returns to TV viewing.

Soccer AV mode on or off.

SLEEP Sets the length of time until the TV to turns off.

Control buttons ( ,, ,,) Controls the SIMPLINK compatible devices (USB, SIMPLINK).

Color Buttons These access special functions in some menus. ()

10

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail]. This offer is valid for three

(3) years from the date on which you purchased the product.

Troubleshooting

••Cannot control the TV with the remote control. -- Check if anything such as tape has been placed

over the receiver.

-- Check if there is any obstacle between the product and the remote control.

-- Replace the batteries with new ones.

••No image display and no sound is produced. -- Check if the product is turned on.

-- Check if the power cord is connected to a wall outlet.

-- Check if there is a problem in the wall outlet by connecting other products.

••The TV turns off suddenly.

-- Check the power control settings. The power supply may be interrupted.

-- Check if the Sleep Timer / Timer Power Off feature is activated in the Timers settings.

-- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Television System

For UF6400,	NTSC, PAL-M/N, SBTVD
UF6450 series
For UF640T,	NTSC, PAL-M/N, DVB-T, DVB-T2
UF645T series

Program Coverage

For UF6400, VHF 2-13, UHF 14-69, DTV 2-69,

UF6450 series CATV 1-135

For UF640T, VHF 2-13, UHF 14-69, DTV 2-69,

UF645T series CATV 1-125

External Antenna Impedance

75 Ω

Environment Condition

••Operating Temperature

0 °C to 40 °C

••Operating Humidity

Less than 80 %

••Storage Temperature

- 20 °C to 60 °C

••Storage Humidity

Less than 85 %

Wireless LAN module (WN8122E1) specification

(For UF6400, UF6450, UF640T, UF645T series)

Standard IEEE802.11a/b/g/n

Frequency 2400 to 2483.5 MHz range 5150 to 5250 MHz

5725 to 5850 MHz

802.11a: 16.5 dBm Output 802.11b: 16 dBm power 802.11g: 15.5 dBm

(Max.) 802.11n - 2.4 GHz: 15.5 dBm 802.11n - 5 GHz: 16.5 dBm

••Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table.

••This device should be installed and operated with minimum distance 20 cm between the device and your body. And this phrase is for the general statement for consideration of user environment.

••Contains FCC ID: BEJWN8122E1 /

Contains IC: 2703H-WN8122E1

<![if ! IE]>

<![endif]>ENGLISH

11

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service.

MODEL

SERIAL

OWNER’S MANUAL

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 KEY CODES

KEY CODES

• This feature is not available for all models.

	Code	Function	Note	Code	Function	Note
	(Hexa)			(Hexa)
	00	CH +, PR +	R/C Button	53	List	R/C Button
	01	CH -, PR -	R/C Button	5B	Exit	R/C Button
	02	Volume +	R/C Button	60	PIP(AD)	R/C Button
	03	Volume -	R/C Button	61	Blue	R/C Button
	06	> (Arrow Key / Right Key)	R/C Button	63	Yellow	R/C Button
	07	< (Arrow Key / Left Key)	R/C Button	71	Green	R/C Button
	08	Power	R/C Button	72	Red	R/C Button
	09	Mute	R/C Button	79	Ratio / Aspect Ratio	R/C Button
	0B	Input	R/C Button	91	AD (Audio Description)	R/C Button
	0E	SLEEP	R/C Button	7A	User Guide	R/C Button
	0F	TV, TV/RAD	R/C Button	7C	Smart / Home	R/C Button
	10 - 19	* Number Key 0 - 9	R/C Button	7E	SIMPLINK	R/C Button
	1A	Q.View / Flashback	R/C Button	8E	►► (Forward)	R/C Button
	1E	FAV (Favorite Channel)	R/C Button	8F	◄◄ (Rewind)	R/C Button
	20	Text (Teletext)	R/C Button	AA	Info	R/C Button
	21	T. Opt (Teletext Option)	R/C Button	AB	Program Guide	R/C Button
	28	Return (BACK)	R/C Button	B0	► (Play)	R/C Button
	30	AV (Audio / Video) Mode	R/C Button	B1	(Stop / File List)	R/C Button
	39	Caption/Subtitle	R/C Button	BA	(Freeze / Slow Play /	R/C Button
					Pause)
	40	Λ (Arrow Key / Cursor Up)	R/C Button	BB	Soccer	R/C Button
	41	V (Arrow Key / Cursor	R/C Button	BD	(REC)	R/C Button
		Down)
	42	My Apps	R/C Button	DC	3D	R/C Button
	43	Menu / Settings	R/C Button	99	AutoConfig	R/C Button
	44	OK / Enter	R/C Button	9F	App / *	R/C Button
	45	Q.Menu	R/C Button
	4C	List, - (ATSC Only)	R/C Button

*Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

EXTERNAL CONTROL DEVICE SETUP 3

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

*Please be advised that not all models support this type of connectivity.

*Cable is not provided.

USB to Serial converter with USB Cable

USB Type

(PC)

<![if ! IE]> <![endif]>USB IN

(TV)

•LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG.

•It can be purchased from computer stores that carry accessories for IT support professionals.

RS-232C With RS232C Cable

DE9 (D-Sub 9pin) Type

•You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual.

	RS-232C IN
(PC)	(CONTROL & SERVICE)	(TV)

The connection interface may differ from your TV.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 EXTERNAL CONTROL DEVICE SETUP

Phone jack Type

•You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.

*For other models, connect to the USB port.

*The connection interface may differ from your TV.

	3		1	<![if ! IE]> <![endif]>ONLY
(PC)				<![if ! IE]> <![endif]>SERVICE	(TV)
		2
- or
	3		1
(PC)				RS-232C IN
		2		(CONTROL & SERVICE)

Customer Computer	RS-232C configurations
	3-Wire Configurations(Not standard)
1	5		PC	TV
	RXD	2			2	TXD
	TXD	3			1	RXD
	GND	5			3	GND
6	9			OR
RS-232C	RXD	3			2	TXD
(Serial port)	TXD	2			1	RXD
	GND	5			3	GND
		D-Sub 9		Phone

Set ID

For Set ID number, see "Real Data Mapping" on p.6

1.Press SETTINGS to access the main menus.

2.Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3.Press the Navigation buttons to scroll to SET ID and press OK.

4.Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5.When you are finished, press EXIT.

*(Depending on model)

			EXTERNAL CONTROL DEVICE SETUP 5
Communication Parameters
•	Baud rate : 9600 bps (UART)	•	Stop bit : 1 bit
•	Data length : 8 bits	•	Communication code : ASCII code
•	Parity : None	•	Use a crossed (reverse) cable.

Command reference list

(Depending on model)

			COMMAND1	COMMAND2	DATA
					(Hexadecimal)
	01.	Power*	k	a	00 to 01
	02. Aspect		k	c	(p.7)
	Ratio
	03.	Screen	k	d	(p.7)
	Mute
	04.	Volume	k	e	00 to 01
	Mute
	05.	Volume	k	f	00 to 64
	Control
	06.	Contrast	k	g	00 to 64
	07.		k	h	00 to 64
	Brightness
	08.	Color/	k	i	00 to 64
	Colour
	09.	Tint	k	j	00 to 64
	10.		k	k	00 to 32
	Sharpness
	11. OSD		k	l	00 to 01
	Select
	12.	Remote
	Control Lock		k	m	00 to 01
	Mode
	13.	Treble	k	r	00 to 64
	14.	Bass	k	s	00 to 64

			COMMAND1	COMMAND2	DATA
					(Hexadecimal)
	15.	Balance	k	t	00 to 64
	16.	Color
	(Colour)		x	u	00 to 64
	Temperature
	17.	ISM
	Method (Only		j	p	(p.8)
	Plasma TV)
	18.	Equalizer	j	v	(p.8)
	19.	Energy	j	q	00 to 05
	Saving
	20. Tune		m	a	(p.9)
	Command
	21.	Channel	m	b	00 to 01
	(Programme)
	Add/Del(Skip)
	22. Key		m	c	Key Codes
	23.	Control	m	g	00 to 64
	Backlight,
	Control Panel
	Light
	24.	Input	x	b	(p.11)
	select (Main)
	25.	3D (Only	x	t	(p.11)
	3D models)
	26.	Extended	x	v	(p.11)
	3D (Only 3D
	models)
	27. Auto		j	u	(p.12)
	Configure

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG.

With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.

<![if ! IE]>

<![endif]>ENGLISH