LG 49UB850T Owner's Manual [es]

OWNER’S MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Click! User Guide

Please read this manual carefully before operating your set and retain it
for future reference.

49UB850T
55UB850T
60UB850T

*MFL67987072*

65UB930T
65UB950T

55UC970T
65UC970T
79UC970T

P/NO : MFL67987072 (1404-REV00)

79UB980T
84UB980T
98UB980T
105UC9T

www.lg.com

2

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

y

Clean only with a dry cloth.

y

Do not block any ventilation openings.

y

Install in accordance with the
manufacturer’s instructions.

Do not install near any heat sources such

y

as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.

Do not defeat the safety purpose of the

y

polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet (Can differ by country).

ENGLISH

ENG

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,

is intended to alert the user to the
presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may
be seriously injured or there is a possibility of
accident or death.

CAUTION

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

NOTE

The note helps you understand and use the
product safely. Please read the note carefully
before using the product.

Do not press strongly upon the panel with

y

a hand or a sharp object such as a nail,
pencil or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

Short-circuit

Breaker

Power Supply

Short-circuit

Breaker

Power Supply

3

Protect the power cord from being

y

walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

Only use attachments/accessories

y

specified by the manufacturer.

Use only with a cart, stand, tripod, bracket,

y

or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Unplug this apparatus during lightning

y

storms or when unused for long periods of
time.

Refer all servicing to qualified service

y

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.

Do not stick metal objects or any other

y

conductive material into the power cord.
Do not touch the end of the power cord
while it is plugged in.
Keep the packing anti-moisture material or

y

vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.

CAUTION concerning the Power Cord

y

(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
service. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance. Do not move the TV with
the power cord plugged in. Do not use a
damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug
the TV.

Warning

y

- To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.

Do not expose to dripping or splashing

y

and do not place objects filled with liquids,
such as vases, cups, etc. on or over the
apparatus (e.g. on shelves above the unit).

ENGENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

ENG

Grounding

y

(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock (i.e. a
TV with a three-prong grounded AC plug must
be connected to a three-prong grounded AC
outlet). If grounding methods are not possible,
have a qualified electrician install a separate
circuit breaker. Do not try to ground the unit
by connecting it to telephone wires, lightning
rods, or gas pipes.

Short-circuit

As long as this unit is connected to the AC

y

Power Supply

Breaker

wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
Do not attempt to modify this product in

y

any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.

Outdoor Antenna Grounding

y

(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur. Be sure the antenna
system is grounded so as to provide some
protection against voltage surges and built­up static charges. Section 810 of the National
Electrical Code (NEC) in the U.S.A. provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements for the
grounding electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

Cleaning

y

When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.

Moving

y

Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.

Ventilation

y

Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover
the product with cloth or other materials
while plugged. Do not install in excessively
dusty places.
If you smell smoke or other odors coming

y

from the TV, unplug the power cord and
contact an authorized service center.
Keep the product away from direct

y

sunlight.
Never touch this apparatus or antenna

y

during a thunder or lightning storm.
When mounting a TV on the wall, make

y

sure not to install the TV by hanging the
power and signal cables on the back of the
TV.
Do not allow an impact shock or any

y

objects to fall into the product, and do not
drop anything onto the screen.

Disconnecting the Main Power

y

The power outlet used with this device
must remain easily accessible.
Store the accessories (battery, etc.) in a

y

safe location out of the reach of children.
This apparatus use batteries. In your

y

community there might be regulations
that require you to dispose of these
batteries properly due to environmental
considerations. Please contact your
local authorities for disposal or recycling
information.
Do not dispose of batteries in a fire.

y

Do not short circuit, disassemble or allow

y

the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

5

Dot Defect

y

The Plasma or LCD panel is a high
technology product with resolution of
two million to six million pixels. In a very
few cases, you could see fine dots on the
screen while you’re viewing the TV. Those
dots are deactivated pixels and do not
affect the performance and reliability of the
TV.

Generated Sound

y

Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This
noise is common for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high­speed switching circuit, which supplies
a large amount of current to operate a
product. It varies depending upon the
product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation

y

openings. When watching the TV for
a long period, the ventilation openings
may become hot. This does not affect
the performance of the product or cause
defects in the product.
Do not install this product on a wall if it

y

could be exposed to oil or oil mist. This
may damage the product and cause it to
fall.
If the TV feels cold to the touch, there may

y

be a small flicker when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.

Preventing Image burn or Burn-in on
your TV screen

If a fixed image displays on the TV screen

y

for a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is image burn or burn-in
and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3

y

for a long period of time, image burn
may occur on the letterboxed area of the
screen.
Avoid displaying a fixed image on the TV

y

screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.

ENGENGLISH

6

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

Viewing Time

y

When watching 3D contents, take 5 to

­15 minute breaks every hour. Viewing 3D
contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or
chronic illness

Some users may experience a seizure or

y

other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
Do not watch 3D videos if you feel nausea,

y

are pregnant and/ or have a chronic illness

ENGLISH

ENG

such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
3D Contents are not recommended to

y

those who suffer from stereo blindness
or stereo anomaly. Double images or
discomfort in viewing may be experienced.
If you have strabismus (cross-eyed),

y

amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
If your eyesight varies between your right

y

and left eye, revise your eyesight prior to
watching 3D contents.

Symptoms which require discontinuation or
refraining from watching 3D contents

Do not watch 3D contents when you feel

y

fatigue from lack of sleep, overwork or
drinking.
When these symptoms are experienced,

y

stop using/watching 3D contents and get
enough rest until the symptom subsides.

- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image,
visual inconvenience or fatigue.

CAUTION

Viewing Environment

Viewing Distance

y

-

Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the TV.

Viewing Age

Infants / Children

y

- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.

- Children under the age of 10 may overreact
and become overly excited because their
vision is in development (for example: trying
to touch the screen or trying to jump into
it. Special monitoring and extra attention is
required for children watching 3D contents.

- Children have greater binocular disparity of
3D presentations than adults because the
distance between the eyes is shorter than
one of adults. Therefore they will perceive
more stereoscopic depth compared to
adults for the same 3D image.

Teenagers

y

- Teenagers under the age of 19 may be
stimulated to light coming from 3D videos.
Advise them not to watch 3D videos for a
long time when they are tired.

Elderly

y

- The elderly may perceive less of a 3D
effect than the youth. Do not sit closer to
the TV than the recommended distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses.

y

Otherwise, you may not be able to view 3D
videos properly.
Do not use 3D glasses instead of your

y

normal glasses, sunglasses or protective
goggles.
Using modified 3D glasses may cause eye

y

strain or image distortion.
Do not keep your 3D glasses in extremely

y

high or low temperatures. It will cause
deformation.
The 3D glasses are fragile and are easy to be

y

scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.

LICENSES

LICENSES / OPEN SOURCE SOFTWARE NOTICE

7

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the
cost of performing such distribution (such as the cost of media, shipping and handling) upon email
request to
purchased the product.

[e-mail].

http://opensource.lge.com.

This offer is valid for three (3) years from the date on which you

ENGENGLISH

8

TABLE OF CONTENTS

TABLE OF CONTENTS

2 IMPORTANT SAFETY

INSTRUCTIONS

6 Viewing 3D Imaging

7 LICENSES

7 OPEN SOURCE SOFTWARE

NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

ENGLISH

9 Unpacking

ENG

12 Optional Extras
13 Parts and Buttons

14 - Using the joystick button

15 Lifting and Moving the TV
16 Setting up the TV

16 - Attaching the Stand

18 - Mounting on a Table

19 - Mounting On a Wall

21 - Tidying Cables

21 Using Built-in Camera

22 - Preparing Built-in Camera

22 - Name of Parts for the Built-In Camera

22 - Checking the Camera’s Shooting

Range

23 MAKING CONNECTIONS

23 Connecting to an Antenna or Cable
24 Connecting to a HD receiver, DVD

Player, or VCR

24 - HDMI Connection

25 - DVI to HDMI Connection

26 - Connecting to a Mobile Phone

27 - Component Connection

28 - Composite Connection

29 Connecting to a PC

29 - HDMI Connection or DVI to HDMI

Connection

31 Connecting to an Audio System

31 - Digital Optical Audio Connection

32 Connecting Headphones
33 Connecting a USB Drive

34 MAGIC REMOTE FUNCTIONS

35 Registering Magic Remote
35 How to Use Magic Remote
35 Precautions to Take When Using the

Magic Remote

36 USING THE USER GUIDE

37 SPECIFICATIONS

40 MAINTENANCE

40 Cleaning Your TV

40 - Screen, Frame, Cabinet, and Stand

40 - Power Cord

NOTE

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may

y

differ slightly from that shown in this
manual.
The available menus and options may

y

differ from the input source or product
model that you are using.
New features may be added to this TV in

y

the future.

41 TROUBLESHOOTING

41 EXTERNAL CONTROL DEVICE

SETUP

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

1

Attach the stand to the TV set.

2

Connect an external device to the TV set.

3

Make sure the network connection is available.

4

You can use the TV network functions only when the network connection is made.

* When the TV is turned on for the first time after being shipped from the factory, initialization of

the TV may take up to one minute.

ASSEMBLING AND PREPARING

Unpacking

9

Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

In case of some model, the thin film on screen is a part of TV, So don’t take it off.

y

NOTE

The items supplied with your product may vary depending upon the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

thick and 18 mm width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not

y

fit into your TV’s USB port.

B

A

*A 10 mm
*B 18 mm

B

A

ENGENGLISH

10

ASSEMBLING AND PREPARING

(For 79/84/98UB980T)

Magic Remote,
Batteries (AA)

(See page 34.)
(For 49/55/60UB850T,

65UB930T, 65UB950T,
55/65UC970T)

Stand Base/Stand Body

ENGLISH

(See pages 16 and 17.)

ENG

Cable Holder

(Depending upon model)
(See page 21.)

Owner’s Manual

(For 79/84/98UB980T)

Stand Base

(See page 17.)

Cable Management

2 EA
(Depending upon model)
(See page 21.)

Wrench

(See page 18.)

HDMI cable

(Depending upon model)
(See pages 24 and 29.)

Cinema 3D Glasses

The number of 3D glasses
may differ depending upon
the model or country.
(Depending upon model)

Video call camera

(Depending upon model)

Tag On

Tag On

(Depending upon model)

Power Cord

(Depending upon model)

ASSEMBLING AND PREPARING

11

(For 49/55/60UB850T,
65UB930T, 65UB950T,
55/65UC970T)

Stand Screws

8 EA, M4 x L20
(See pages 16 and 17.)

Dual play glasses

(Depending upon model)

(For 79/84/98UB980T)

Stand Screws

4EA, M6 x L50
(See page 18.)

Composite Video Cable

(See pages 27 and 28)

(For 84UB980T)

Insulation Holder

4EA
(See page 18.)

Component Video Cable

(See page 27.)

ENGENGLISH

12

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances or policies.

ENGLISH

ENG

AN-MR500

Magic Remote

AG-F***DP

Dual Play Glasses

Compatibility

AN-MR500

Magic Remote

AG-F***

Cinema 3D Glasses

AG-F***DP

Dual Play Glasses

AN-VC5**

Video Call Camera

Tag On

LG Audio Device

AG-F***

Cinema 3D Glasses

LG Audio Device Tag On

49/55/60UB850T

65UB950T

55/65/79UC970T

65UB930T

AN-VC5**

Video Call Camera

• • •

• •

• •

• •

• • •

• • •

79/84/98UB980T

105UC9T

ASSEMBLING AND PREPARING

Parts and Buttons

(For 49/55/60UB850T) (For 65UB930T, 65UB950T, 55/65UC970T)

Screen

Screen

13

Remote

Control Sensor

Intelligent

Sensor

Power Indicator

Speakers

1

Joystick Button

2

Control Censor

Intelligent

Power Indicator

Remote

Censor

Speakers

Joystick Button

1

(For 79/84/98UB980T)

Screen

Built in Camera

Speakers

Remote

Control sensor

Joystick Button

2

LG Logo Light

Intelligent

1. Intelligent Sensor - Adjusts the image quality and brightness based on the surrounding environment.

2. Joystick Button is located behind the screen of TV.

3. Joystick Button is located below the screen of TV.

Sensor

1

NOTE

You can set the LG Logo Light or power indicator light to on or off by selecting

y

the main menu. (Depending upon model)

GENERAL

3

ENGENGLISH

in

14

ASSEMBLING AND PREPARING

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume Control

Channels Control

When the TV is turned off, place your finger on the joystick button, press it
once and release it.

When the TV is turned on, place your finger on the joystick button, press it
once for a few seconds and release it.

If you place your finger over the joystick button, move it left or right, you can
adjust the volume level you want.

If you place your finger over the joystick button, move it up or down, you can
scroll through the saved channels you want.

NOTE

• With your finger over the joystick button, move it up, down, left, or right, be careful not to press

the joystick button. If you press the joystick button first, you can not adjust the volume level and/
or scroll through saved channels.

ENGLISH

ENG

Adjusting the menu

When the TV is turned on, press the joystick button one time.
You can adjust the menu items ( , , ) moving the joystick button left, or right.

TV Off

Close

Input

Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.

Lifting and Moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.
Do not place the product on the floor with

y

its front facing down without padding.
Failure to do so may result in damage to
the screen.

It is recommended to move the TV in the

y

box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect

y

the power cord and all cables.
When holding the TV, the screen should

y

face away from you to avoid damage.

ASSEMBLING AND PREPARING

Use at least two people to move a

y

large TV.
When transporting the TV by hand,

y

hold the TV as shown in the following
illustration.

When handling the TV, be careful not to

y

damage the protruding joystick button.
When transporting the TV, do not expose

y

the TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright; never turn the TV on its side or tilt
towards the left or right.

15

ENGENGLISH

Hold the top and bottom of the TV frame

y

firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

16

ASSEMBLING AND PREPARING

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

When attaching the stand to the TV set, place the screen facing down on a cushioned table or

y

flat surface to protect the screen from scratches.
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the

y

TV may tilt forward after being installed.)
Do not tighten the screws with too much force; otherwise they may be damaged and come

y

loose later.

NOTE

Remove the stand before installing the TV on a wall mount by performing the stand attachment

y

in reverse.

ENGLISH

ENG

(For 49/55/60UB850T, 65UB930T,

1

65UB950T, 55/65UC970T)

Stand Body (L)

Stand Body (R)

Stand Base

4 EA
M4 x L20

(For 49/55/60UB850T)

2

1

2

1

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower
connection on the back of the TV.

ASSEMBLING AND PREPARING

17

(For 65UB930T, 65UB950T, 55/65UC970T)

1

1

2

1

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

2

Attach the stand to the TV using the lower
connection on the back of the TV.

3

(For 79/84/98UB980T)

1

Stand Base

2

ENGENGLISH

4 EA
M4 x L20

18

1

ASSEMBLING AND PREPARING

3

(For 79/98UB980T)

ENGLISH

ENG

(For 84UB980T)

Wrench

CAUTION

Make sure that the screws are inserted

y

correctly and fastened securely. (If they
are not fastened securely enough, the TV
may tilt forward after being installed.)

1

2

M6 x L50
4EA
(79/98UB980T)

Mounting on a Table

Lift and tilt the TV into its upright position on

1

a table.

- Leave a 10 cm (minimum) space from the
wall for proper ventilation.

10 cm

1

2

Wrench

10 cm

Connect the power cord to a wall outlet.

2

10 cm

10 cm

CAUTION

Do not place the TV near or on sources

M6 x L50
4 EA

4 EA
(Insulation
Holder)

y

of heat, as this may result in fire or other
damage.

ASSEMBLING AND PREPARING

19

Securing the TV to a Wall (optional)

(Depending upon model)

Insert and tighten the eye-bolts, or TV

1

brackets and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

Mount the wall brackets with the bolts to

2

the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets

3

tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.

CAUTION

Make sure that children do not climb on

y

or hang on the TV.

Mounting On a Wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LG’s wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.

10 cm

ENGENGLISH

10 cm

10 cm

10 cm

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.

NOTE

Use a platform or cabinet that is strong

y

and large enough to support the TV
securely.
Brackets, bolts and ropes, are optional.

y

You can obtain additional accessories
from your local dealer.

20

A

ASSEMBLING AND PREPARING

Model 49/55UB850T

VESA (A x B)

A

B

Standard screw M6 M6
Number of screws
Wall mount bracket

(optional)

Model 79/84/98UB980T
VESA (A x B)

B

Standard screw
Number of screws

ENGLISH

ENG

Wall mount bracket
(optional)

Wall mount bracket (optional)

LSW440B

LSW640B

55UC970T

65UB930T
65UB950T
65UC970T

400 x 400 400 x 400

4 4

60UB850T

LSW440B
MSW240

LSW440B

600 x 400

M8
4

LSW640B

CAUTION

Disconnect the power first, and then

y

move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted

y

wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this

y

may cause damage to the TV and void
your warranty.
Use the screws and wall mounts that

y

meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the
warranty.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications.
The wall mount kit includes an installation

y

manual and necessary parts.
The wall mount bracket is optional. You can

y

obtain additional accessories from your local
dealer.
The length of screws may differ depending

y

upon the wall mount. Make sure to use the
proper length.
For more information, refer to the manual

y

supplied with the wall mount.

MSW240

ASSEMBLING AND PREPARING

21

Tidying Cables

(For 49/55/60UB850T, 65UB930T, 65UB950T,
55/65UC970T)

Gather and bind the cables with the cable
holder and cable management.

Cable Holder

Cable Management

(For 79/84/98UB980T)
Gather and bind the cables with the cable

holder.

Using Built-in Camera

(For 79/84/98UB980T, 105UC9T)
You can make a Skype video call or use the

motion recognition function using the built-in
camera of the TV.
This TV does not support the use of an external

camera.

NOTE

Before using the built-in camera, you must

y

recognize the fact that you are legally
responsible for the use or misuse of the
camera by the relevant national laws
including the criminal law.
The relevant laws include the Personal

y

Information Protection law which regulates
the processing and transferring of personal
information and the law which regulates
the monitoring by camera in a workplace
and other places.
When using the built-in camera, the user

y

must gain consent from the persons being
observed. Please avoid using the camera
in the following manner. We suggest
avoiding the following situations:
(1) Using the camera in areas where the
use of camera is generally prohibited such
as restroom, locker room, fitting room, and
security area.
(2) Using the camera while causing the
infringement of privacy.
(3) Using the camera while causing the
violation of the relevant regulations or
laws.

ENGENGLISH

Cable Holder

CAUTION

Do not move the TV by holding the cable

y

holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.

22

ASSEMBLING AND PREPARING

Preparing Built-in Camera

1 Pull up the built-in camera at the back of

the TV.

Angle Adjustment Lever

ENGLISH

ENG

NOTE

• Remove the protective film before using the

built-in camera.

2 You can adjust the angle of the camera with

the angle adjustment lever on the back of the
built-in camera (within 5 degrees vertically).

3 Pull down the built-in camera when you are

not using it.

Slide

Name of Parts for the Built-In
Camera

Protective film

Camera Lens

Lever Lens

[Side View]

7˚

5˚

5˚

7˚

Microphone

Checking the Camera’s Shooting
Range

1 Press the (Home) button to access the

Home menu.

2 Select CAMERA and then

press the Wheel (OK) button.

NOTE

• The optimal distance from the camera to

use the motion recognition function is be­tween 1.5 m and 4.5 m.

MAKING CONNECTIONS

MAKING CONNECTIONS

This section uses illustrations of the 55UB850T.

y

You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external device’s connection, refer to the manual provided with
each device.

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal

y

input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
The external device connections shown may differ slightly from illustrations in this manual.

y

Connect external devices to the TV regardless of the order of the TV port.

y

If you connect a gaming device to the TV, use the cable supplied with the gaming device.

y

Refer to the external equipment’s manual for operating instructions.

y

Connecting to an Antenna or Cable

23

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is optional.

VHF Antenna
UHF Antenna

Antenna

Coaxial (75Ω)

(*Not Provided)

Terminal

or

Coaxial (75Ω)

(*Not Provided)

Wall Jack

CAUTION

Make sure not to bend the copper wire

y

of the RF cable.

Copper wire

Complete all connections between

y

devices, and then connect the power
cord to the power outlet to prevent
damage to your TV.

NOTE

To improve the picture quality in a poor

y

signal area, please purchase a signal
amplifier and install properly.
Use a signal splitter to use more than 2

y

TVs.
If the antenna is not installed properly,

y

contact your dealer for assistance.
DTV Audio Supported Codec: MPEG,

y

Dolby digital, AAC, HE-AAC.

ENGENGLISH

24

HDMI

MAKING CONNECTIONS

Connecting to a HD receiver, DVD Player, or VCR

Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.

HDMI Connection

HDMI is the best way to connect a device.

Transmits the digital video and audio signals from an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown in the following illustration.

NOTE

• Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control)

function.

• High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

• HDMI Audio Supported Format: Dolby Digital, DTS, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48

kHz / 96 kHz / 192 kHz).

• When you use an HDMI cable(HDMI port3), it is recommended that you use the cable provided.

If you use a regular HDMI cable, use a high-speed HDMI cable (3m or less).

Choose any HDMI input port to connect.
It does not matter which port you use.

ENGLISH

ENG

DVD / Blu-Ray / HD Cable Box / HD STB

ARC (Audio Return Channel)

When connected with a high-speed

y

HDMI cable, digital audio can be sent to a
compactible device without an additional
optical audio cable.
ARC is only supported on the

y

(4K@60Hz)/DVI IN 2 (ARC)

HDMI

port. An
external audio device that supports
ARC should be connected to

(4K@60Hz)/DVI IN 2 (ARC)

HDMI

if you wish to
use ARC.

HDMI cable

4K@ 50/60Hz Support Format

Frame

Resolution

3840 X 2160p
4096 X 2160p

Color Depth / Chroma Sampling
rate
(Hz)

50.00

59.94

60.00

8 bit 10 bit 12 bit

YCbCr

4:2:0

YCbCr 4:2:2

YCbCr

1

4:4:4

RGB

1

4:4:4

1

Supported at HDMI3 Port only

YCbCr 4:2:0

- -

- -

NOTE

• HDMI specifications may be different for

each input port, so make sure to check the
device specifications before connecting.

• Contact customer service for more informa-

tion on the HDMI specifications of each
input port.

1

1

MAKING CONNECTIONS

25

DVI to HDMI Connection

Transmits the digital video signal from an external device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal,
connect an audio cable.

NOTE

When using the HDMI/DVI cable, single link is only supported.

y

Choose any HDMI input port to connect.
It does not matter which port you use.

(*Not Provided)

ENGENGLISH

(*Not Provided)

DVI OUT

AUDIO OUT

DVD / Blu-Ray / HD Cable Box

26

MAKING CONNECTIONS

Connecting to a Mobile Phone

Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from
mobile phones to television sets.

NOTE

Connect the mobile phone to the HDMI(4K@60Hz)/DVI IN 4 (MHL) port to view the phone screen

y

on the TV.
This only works for the MHL-enabled phone.

y

With some MHL supporting mobile phones, you can use the TV remote to control the phone.

y

An MHL passive cable is needed to connect the TV and a mobile phone.

y

Remove the MHL cable from the TV when:

y

- the MHL function is disabled.

- your mobile device is fully charged in standby mode.

MHL Cable

ENGLISH

ENG

(*Not Provided)

Mobile phone

MAKING CONNECTIONS

Component Connection

Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with a component cable as shown in the following illustration.

NOTE

If cables are installed incorrectly, it could cause the image to display in black and white or with

y

distorted color.

Check to ensure the cables are matched with the corresponding color connection.

y

IN

COMPONENT

AV

VIDEO AUDIOYPBP

R

27

ENGENGLISH

YELLOW

GREEN

(Use the composite video cable provided.) (Use the component video cable provided.)

YELLOW

WHITE

RED

RED

RED

WHITE

WHITE

RED

L R

AUDIO

RED

RED

BLUE

BLUE

BLUE

VIDEO

GREEN

GREEN

GREEN

(*Not Provided)(*Not Provided)

DVD / Blu-Ray / HD Cable Box