LG Electronics 49UB8500 User Manual
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV
and retain it for future reference.
Click! User Guide
49UB8500
55UB8500
60UB8500
65UB9300 55UB9500
*MFL67987282*
65UC9700
65UB9500
www.lg.com
P/NO : MFL67987282 (1404-REV00)
IMPORTANT SAFETY INSTRUCTIONS
2
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
Read these instructions.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Keep these instructions.
Follow all instructions.
Heed all warnings.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
intended to alert the user to the presence
of uninsulated dangerous voltage within the
product’s enclosure that may be of
ENGLISH
sufficient magnitude to constitute a risk of
electric shock to persons.
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
The exclamation point within an
equilateral triangle is intended to alert
WARNING
CAUTION
NOTE
f Do not allow the television to become wet.
f Clean only with a dry cloth.
f Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
f Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
f Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet (Can differ
by country).
WARNING: This product contains chemicals
known to the State of California to cause
cancer and birth defects or other reproductive
harm.
Wash hands after handling.
f Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil
or pen, or make a scratch on it.
IMPORTANT SAFETY INSTRUCTIONS
3
f Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
f Only use attachments/accessories specified
by the manufacturer.
f Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
f Unplug this apparatus during lightning storms
or when unused for long periods of time.
f Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
f Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
f Keep the packing anti-moisture material
or vinyl packing out of the reach of
children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake,
induce vomiting and go to the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
f CAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
f Warning - To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
f Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
4
f Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
f As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
f Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
ENGLISH
could void the user’s authority to operate this
product.
f Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Short-circuit
Breaker
Power
Supply
f Cleaning
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
f Moving
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
f Ventilation
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
f If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
f Keep the product away from direct sunlight.
f Never touch this apparatus or antenna during
a lightning storm.
f When mounting a TV on the wall, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
f Do not allow an impact shock, any objects to
fall into the product, and do not drop anything
onto the screen.
f DISCONNECTING DEVICE FROM THE MAIN
POWER
Mains plug is the disconnecting device. The
plug must remain readily operable.
f Store the accessories (battery, etc.) in a safe
location out of the reach of children.
f This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
f Do not dispose of batteries in a fire.
f Do not short circuit, disassemble, or allow
the batteries to overheat.
Ground Clamp
Electric Service
Equipment
Ground Clamp
NEC: National Electrical Code
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
IMPORTANT SAFETY INSTRUCTIONS
5
f Dot Defect
The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots
on the screen while you’re viewing the TV.
Those dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
f Generated Sound
Cracking noise A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing
A low level noise is generated from a
high-speed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending upon the product.
This generated sound does not affect the
performance and reliability of the product.
f Take care not to touch the ventilation
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
f Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
f If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This
is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
Preventing image burn or burn-in on your
TV screen
f If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
f If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
f Avoid displaying a fixed image on the TV
screen for a long period of time (2 or more
hours for LCD, 1 or more hours for the
Plasma TV) to prevent image burn.
ENGLISH
6
For USA and Canada
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device. Any
ENGLISH
changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS
Viewing 3D imaging (For 3D models)
WARNING
Viewing Environment
f Viewing Time
- When watching 3D content, take 5 to 15 minute breaks every hour. Viewing 3D content for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
f Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D content.
f Do not watch 3D videos if you feel nauseous, are pregnant and / or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure disease, etc.
f 3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be experienced.
f If you have strabismus (cross-eyed), amblyopia (weak eyesight), or astigmatism, you may have
trouble sensing depth and easily feel fatigue due to double images. It is advised to take more
frequent breaks than the average adult.
f If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
content.
Symptoms which require discontinuation or refraining from watching 3D content
7
ENGLISH
f Do not watch 3D content when you feel fatigue from lack of sleep, overwork, or intoxication.
f When these symptoms are experienced, stop using/watching 3D content and get enough rest until
the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, define visual inconvenience, or
fatigue.
IMPORTANT SAFETY INSTRUCTIONS
8
CAUTION
Viewing Environment
f Viewing Distance
- Maintain a distance of at least twice the screen’s diagonal length when watching 3D content. If you
feel discomfort in viewing 3D content, move further away from the TV.
Viewing Age
f Infants / Children
- Usage/ Viewing 3D content for children under the age of 5 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D content.
- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
f Teenagers
- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not
to watch 3D videos for a long time when they are tired.
f Elderly
- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the
ENGLISH
recommended distance.
Cautions when using the 3D glasses
f Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
f Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles.
f Using modified 3D glasses may cause eye strain or image distortion.
f Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
f The 3D glasses are fragile and are easily scratched. Use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
LICENSES
LICENSES / OPEN SOURCE SOFTWARE NOTICE
9
Supported licenses may differ by model. For more information about licenses, visit
www.lg.com
.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit
terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com
product.
http://opensource.lge.com
. This offer is valid for three (3) years from the date on which you purchased the
. In addition to the source code, all referred license
ENGLISH
NOTE
f Image shown may differ from your TV.
f Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
f The available menus and options may differ from the input source or product model that you are
using.
f New features may be added to this TV in the future.
TABLE OF CONTENTS
10
TABLE OF CONTENTS
2 IMPORTANT SAFETY
INSTRUCTIONS
7 Viewing 3D imaging (For 3D models)
9 LICENSES
9 OPEN SOURCE SOFTWARE
NOTICE
10 TABLE OF CONTENTS
11 INSTALLATION PROCEDURE
11 ASSEMBLING AND PREPARING
ENGLISH
11 Unpacking
13 Optional Extras
14 Parts and Buttons
15 - Using the Joystick Button
16 Lifting and Moving the TV
17 Setting Up the TV
17 - Attaching the Stand
19 - Mounting on a Table
20 - Mounting on a Wall
21 - Tidying Cables
33 MAGIC REMOTE FUNCTIONS
34 Registering Magic Remote
34 How to use Magic Remote
34 Precautions to Take when Using the
Magic Remote
35 USING THE USER GUIDE
35 EXTERNAL CONTROL DEVICE
SETUP
36 SPECIFICATIONS
38 MAINTENANCE
38 Cleaning your TV
38 - Screen, Frame, Cabinet, and Stand
38 - Power Cord
38 TROUBLESHOOTING
22 MAKING CONNECTIONS
22 Connecting to an Antenna or Cable
23 Connecting to an HD receiver, DVD
player, or VCR
23 - HDMI Connection
24 - DVI to HDMI Connection
25 - Connecting to a Mobile Phone
26 - Component Connection
27 - Composite Connection
28 Connecting to a PC
28 - HDMI Connection or DVI to HDMI
Connection
30 Connecting to an Audio System
30 - Digital Optical Audio Connection
31 Connecting Headphones
32 Connecting a USB device
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of
the TV may take up to one minute.
ASSEMBLING AND PREPARING
Unpacking
11
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
f Do not use any unapproved items to ensure the safety and product’s lifespan.
f Any damages or injuries by using unapproved items are not covered by the warranty.
f Some models appear to have a thin film on the screen. It is actually part of the screen; do not
remove it.
NOTE
f The items supplied with your product may vary depending upon the
model.
f Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
f For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
f Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV’s USB port.
B
A
*A 10 mm (0.39 inches)
18 mm (0.7 inches)
*B
B
A
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
12
12
Magic Remote, Batteries
(AA) (See page 33.)
(For 49/55/60UB8500,
65UB9300, 55/65UB9500)
Stand Base, Stand Body
(See page 17.)
ENGLISH
(For 49/55/60UB8500)
Ferrite core
(See page 13.)
Owner’s Manual Power Cord
(Depending upon model.)
(For 49/55/60UB8500,
65UB9300, 55/65UB9500)
Stand Screws
8 EA, M4 x L20
HDMI cable
(See pages 23 and 28.)
(See pages 17 and 18.)
Component Video Cable
(See page 26.)
Composite Video Cable
(See pages 26 and 27.)
Cable Holder
(See page 21.)
Tag On
Tag On
(Depending upon model.)
Cable Management
2 EA
(Depending upon model.)
(See page 21.)
Cinema 3D Glasses
The number of 3D glasses
may differ depending upon
the model or country.
(Depending upon model.)
Video call camera
(Depending upon model.)
Dual play glasses
(Depending upon model.)
ASSEMBLING AND PREPARING
NOTE
(For 49/55/60UB8500)
f How to use the ferrite core (Depending upon model.)
f Use the ferrite core to reduce the electromagnetic interference in the LAN cable.
Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV.
13
to the TV
Ferrite core
to an External
device
[Cross Section of
Ferrite Core]
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed due to the manufacturer’s circumstances or policies.
AG-F***
Cinema 3D Glasses
Tag On LG Audio Device AN-VC5**
AG-F***DP
Dual Play Glasses
AN-MR500
Magic Remote
Video Call Camera
(Depending upon model.)
ENGLISH
Compatibility
AG-F*** Cinema 3D glasses
AG-F***DP Dual Play Glasses
AN-MR500 Magic remote
Tag On
LG Audio device
AN-VC5** Video Call Camera
(Depending upon model.)
49/55/60UB8500
55/65UB9500
65UC9700
f
f
ff
ff
ff
ff
65UB9300
ASSEMBLING AND PREPARING
14
Parts and Buttons
(For 49/55/60UB8500)
ENGLISH
Intelligent Sensor
Remote Control Sensor
Screen
Speakers
1
Joystick Button
2
Power Indicator
(For 65UB9300, 55/65UB9500, 65UC9700)
Screen
Speakers
Intelligent Sensor
1
Remote Control Sensor
Power Indicator
Joystick Button
3
1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2. Joystick button is located behind the screen of TV.
3. Joystick button is located below the screen of TV.
ASSEMBLING AND PREPARING
Using the Joystick Button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Basic functions
15
Power On
Power Off
Volume Control
Channels Control
When the TV is turned off, place your finger on the joystick button, press it once
and release it.
When the TV is turned on, place your finger on the joystick button, press it once
for a few seconds and release it.
If you place your finger over the joystick button, move it left or right, you can
adjust the volume level you want.
If you place your finger over the joystick button, move it up or down, you can
scroll through the saved channels you want.
NOTE
f With your finger over the joystick button, move it up, down, left, or right, be careful not to press the
joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll
through saved channels.
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the menu items (
, , ) moving the joystick button left or right.
TV OFF
CLOSE
INPUT
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
ENGLISH
ASSEMBLING AND PREPARING
16
Lifting and Moving the TV
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
f Avoid touching the screen at all times, as
this may result in damage to the screen.
f Do not place the product on the floor with its
front facing down without padding. Failure to
do so may result in damage to the screen.
f It is recommended to move the TV in the
box or packing material that the TV originally
came in.
f Before moving or lifting the TV, disconnect
the power cord and all cables.
ENGLISH
f When holding the TV, the
screen should face away from
you to avoid damage.
f Use at least two people to
move a large TV.
f When transporting the TV by
hand, hold the TV as shown in
the following illustration.
f When transporting the TV, do not expose the
TV to jolts or excessive vibration.
f When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
f Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
Setting Up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
f When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
f Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV
may tilt forward after being installed.)
f Do not fasten the screws with excessive force otherwise they may be worn out and become loose.
NOTE
f Remove the stand before installing the TV on a wall mount by performing the stand attachment in
reverse.
17
(For 49/55/60UB8500, 65UB9300, 55/65UB9500)
1 2
Stand Body (R)
Stand Body (L)
Stand Base
M4 x L20
4 EA
ENGLISH
1
2
Attach the stand to the TV using the upper
1
mounting hole on the back of the TV.
Attach the stand to the TV using the lower
2
connection on the back of the TV.
ASSEMBLING AND PREPARING
18
3
M4 x L20
4 EA
ENGLISH
Loading...