LG 49SL5B-B User guide
OWNER’S MANUAL
LG Digital
Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating the your set and retain it for future reference.
32SE3B 32SE3KB 43SL5B 43SE3B 43SE3KB 49SL5B 49SE3B 49SE3KB 55SL5B 55SE3B 55SE3KB
65SE3B 65SE3KB
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 SAFETY PRECAUTIONS
3Precautions in installing the product
4Precautions to the AC adapter and electrical power
5Precautions in moving the product
5Precautions in using the product
5Mounting on a wall
6LICENSES
7ASSEMBLY AND PREPARATION
7Accessories
8Optional Accessories
10Parts and Buttons
12Connecting the Stand
13Connecting the Speakers
14Using the IR Receiver
15Portrait Layout
16Attaching and removing the LG Logo Bracket
17 Installing on a Wall
19 REMOTE CONTROL
21Displaying the Device Name Connected to an Input Port
21White Balance Adjust Menu
22Using Picture ID
23MAKING CONNECTIONS
23 Connecting to a PC
25 External Device Connection
28 USING THE MONITOR
30 ENTERTAINMENT
30 Using the Network
30 - Connecting to a Network
32 - Network Status
32 Using the My Media
32 - Connecting USB storage devices
34 - Browsing Files
36 - Viewing Movies
39 - Viewing Photos
41 - Listening to Music
43- Viewing the Contents List
44CUSTOMIZING SETTINGS
44Accessing Main Menus
45- PICTURE Settings
48- AUDIO Settings
49- TIME Settings
50- OPTION Settings
53- NETWORK Settings
54 TROUBLESHOOTING
56 PRODUCT SPECIFICATIONS
68 IR CODES
70TO CONTROL MULTIPLE PRODUCTS
70Connecting the Cable
71RS-232C Configurations
71- 4P Cable
71- RS-232C Cable
71Communication Parameter
72Command Reference List
|
|
74 |
Transmission / Receiving Protocol |
|
28 |
Using the Input List |
|||
|
|
|||
28 |
Adjusting Aspect Ratio |
|
|
SAFETY PRECAUTIONS |
3 |
Safety precautions
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
WARNING
•• Indoor Use Only.
Precautions in installing the product
WARNING
•• Keep away from heat sources like electrical heaters.
►►Electrical shock, fire, malfunction or deformation may occur.
•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
►►Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the
reach of children.
•• Do not put heavy objects on the product or sit upon it.
►►If the product collapses or is dropped, you may be injured. Children
must pay particular attention.
•• Do not leave the power or signal cable unattended on the pathway.
►►The passerby can falter, which can cause electrical shock, fire, product
breakdown or injury.
•• Install the product in a neat and dry place.
►►Dust or moisture can cause electrical shock, fire or product damage.
•• If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
►►If you continue to use without taking proper measures, electrical
shock or fire can occur.
•• If you dropped the product or the case is broken, turn off the product and unplug the power cord.
►►If you continue to use without taking proper measures, electrical
shock or fire can occur. Contact the service center.
•• Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.
►►It can cause injury to human, problem to product and damage the
display.
•• Do not let the product fall or drop when connecting it with an external device.
►►This may cause injury and/or damage to the product.
•• When connecting it with a game device, keep a distance of four times as long as the diagonal measurement of the screen from the device.
•• Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered by the warranty on this product.
•• Do NOT install this product on a wall where there is high risk of exposure to oil fumes or mist.
►►This may damage product and cause is to fail.
CAUTION
•• Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10 cm from the wall)
►►If you install the product too close to the wall, it may be deformed or
fire can break out due to internal heat.
•• Do not block the ventilation hole of the product by a tablecloth or curtain.
►►The product can be deformed or fire can break out due to overheating
inside the product.
•• Install the product on a flat and stable place that has no risk of dropping the product.
►►If the product is dropped, you may be injured or the product may
be broken.
•• Install the product where no EMI occurs.
•• Keep the product away from direct sunlight.
►►The product can be damaged.
•• If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.
•• Do not install the product in an area with poor ventilation (e.g.on a bookshelf, in a closet) or outside and avoid placing on cushions or carpets.
•• In addition, do not install it where there are heating objects such as lighting equipment.i
<![endif]>ENGLISH
►►If the product falls because of the short cable, this may cause injury and/or damage to the product.
<![endif]>ENGLISH
4 SAFETY PRECAUTIONS
Precautions to the AC adapter and electrical power
WARNING
•• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center.
►►Otherwise, this may cause a fire or electric shock due to damage to
the product.
•• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry them before use.
►►Otherwise, this may cause a fire or electric shock.
•• Make sure to completely insert the power cord into the AC adapter.
►►If loosely connected, the poor connection may cause a fire or electric
shock.
•• Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc.
►►The use of non-approved products may cause a fire or electric shock.
•• When unplugging the power cord, always pull it by the plug. Do not bend the power cord with excessive force.
►►The power line can be damaged, which may cause electric shock
or fire.
•• Be careful not to step or place heavy objects (electronic appliances, clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
►►Damaged power cords may cause a fire or electric shock.
•• Never disassemble, repair or modify the power cord or AC adapter.
•• Make sure to connect the power cable to the grounded current.
•• Use the rated voltage only.
•• In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.
►►It can cause electric shock.
•• Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a
grounding terminal designed for exclusive use with the computer.
►►A fire can break out due to overheating.
•• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
►►You may be electrocuted due to excess moisture.
•• If you don't intend to use the product for a long time, unplug the power cable from the product.
►►Covering dust can cause a fire, or insulation deterioration can cause
electric leakage, electric shock or fire.
•• Fix the power cable completely.
►►If the power cable is not fixed completely, a fire can break out.
•• Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
►►You may be electrocuted.
•• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.
CAUTION
•• Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust and etc.
►►This may cause a fire.
•• Do not unplug the power cord while the product is in use.
►►Electrical shock can damage the product.
•• Use only the power cord supplied with the unit. If you use another power cord, make sure that it is certified by the applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
•• The appliance coupler is used as the disconnect device.
•• Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.
SAFETY PRECAUTIONS |
5 |
Precautions in moving the product
WARNING
•• Make sure to turn off the product.
••
•• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
•• Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
•• Do not shock the product when moving it.
••
Precautions in using the product
WARNING
•• Do not disassemble, repair or modify the product at your own discretion.
►►Fire or electric shock accident can occur.
►►Contact the service center for check, calibration or repair.
•• When the display is to be left unattended for an extended period of time, unplug it from the wall outlet.
•• Keep the product away from water.
►►Fire or electric shock accident can occur.
•• Do not shock or scratch the front and sides of the screen with metallic objects.
►►Otherwise, it may cause damage to the screen.
•• Avoid high temperatures and humidity.
CAUTION
•• Do not put or store inflammable substances near the product.
►►There is a danger of explosion or fire due to careless handling of the
inflammable substances.
•• When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
•• Take a rest from time to time to protect your vision.
•• Keep the product clean at all times.
•• Take a comfortable and natural position when working with a product to relax the muscles.
•• Take a regular break when working with a product for a long time.
•• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
•• Keep the proper distance from the product.
•• Set the appropriate resolution and clock by referring to the User’s Guide.
►►Your vision can be impaired.
•• Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
►►Product can be deformed.
•• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
•• Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight, open fireplace and electric heaters.
•• Do NOT place non-rechargeable batteries in charging device.
•• Using headsets (earphones) for a long time or listening loudly can cause damage to your hearing.
•• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.
•• Do not use products using high voltage around the Monitor. (e.g., a bug zapper)
►►Monitor may have malfunction as its electrical shock.
Mounting on a wall
•• Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact Service personnel authorised by Manufacturer.
<![endif]>ENGLISH
►►Your vision may be impaired if you look at the product too closely.
<![endif]>ENGLISH
6 LICENSES
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ASSEMBLY AND PREPARATION |
7 |
ASSEMBLY AND PREPARATION
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
<![endif]>ENGLISH
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote Control, |
|
Power Cord |
D-sub 15-pin Signal |
||||||
Batteries (AAA) 2 EA |
|
Cable |
|||||||
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Card and the Letter of |
|
RS-232C Gender |
|
IR Receiver |
Warranty |
|
|
||
|
|
|
|
CAUTION
•• Always use genuine components to ensure safety and product performance.
•• The product warranty will not cover damage or injury caused by the use of counterfeit components.
NOTE
•• The accessories provided with your product may vary depending on the model or region.
•• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
•• SuperSign Software & Manual
-Downloading from the LG Electronics website.
-Visit the LG Electronics website (www.lgecommercial.com/supersign) and download the latest software for your model.
<![endif]>ENGLISH
8 ASSEMBLY AND PREPARATION
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories.
|
|
|
Stand |
|
Screws |
|
||
|
|
|
|
|
|
|||
|
|
|
Spacers |
Diameter 4.0 mm x Pitch 0.7 mm |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Length |
|
|
|
|
|
|
|
Model |
(including |
Quantity |
|
|
|
|
|
|
|
spring washer) |
|
|
|
|
32SE3* |
- |
|
32SE3* |
10 mm |
6 EA |
|
Stand |
|
43SE3* |
|
|
43SE3* |
14 mm |
8 EA |
|
|
43SL5B |
|
|
43SL5B |
|||
ST-322T |
32SE3* |
|
|
|
|
|
||
|
49SE3* |
|
|
49SE3* |
14 mm |
8 EA |
||
ST-432T |
43SE3*/43SL5B |
|
|
|
||||
|
49SL5B |
2 EA |
|
49SL5B |
||||
|
|
|
|
|||||
ST-492T |
49SE3*/55SE3* |
|
55SE3* |
|
|
55SE3* |
14 mm |
8 EA |
49SL5B/55SL5B |
|
55SL5B |
|
|
55SL5B |
|||
|
|
|
|
|
|
|||
ST-652T |
65SE3* |
|
65SE3* |
|
|
65SE3* |
16 mm |
8 EA |
Stand kit
Speakers |
Cable holder/ |
SP-5000 |
Cable Tie |
Screws
Diameter 4.0 mm x Pitch 0.7 mm x Length 8 mm (including spring washer)
Screws
Diameter 4.0 mm x Pitch 1.6 mm x Length 10 mm
Speaker kit
(Only for **SE3B/**SL5B model)
NOTE
•• Cable holder/cable tie may not be available in some areas or for some models.
•• Optional accessories are available for some models. If necessary, please purchase them separately.
ASSEMBLY AND PREPARATION |
9 |
<![endif]>ENGLISH
Media Player |
Screws |
CD (Owner's Manual)/ |
|
Cards |
|||
MP500/ MP700 |
|
||
|
|
Media Player kit
( It may not be supported depending on the model.)
AN-WF500
Wi-Fi Dongle kit
NOTE
•• Optional accessories are available for some models. If necessary, please purchase them separately.
<![endif]>ENGLISH
10 ASSEMBLY AND PREPARATION
Parts and Buttons
- The image may be different according to the model
32/43/49/55/65SE3B |
32/43/49/55/65SE3KB |
43/49/55SL5B |
|
|
|
|
<![if ! IE]> <![endif]>USB 2 V 1.0 A |
|
|
|
|
|
<![if ! IE]> <![endif]>5 |
|
|
|
|
|
<![if ! IE]> <![endif]>USB 1 V 1.0 A |
|
|
|
|
|
<![if ! IE]> <![endif]>5 |
|
|
|
|
|
<![if ! IE]> <![endif]>LAN |
|
|
|
|
|
<![if ! IE]> <![endif]>RGB IN |
|
|
|
|
|
<![if ! IE]> <![endif]>DVI-D IN |
|
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
Buttons
|
|
|
|
|
|
|
|
|
|
|
|
Connection |
||
(Only for |
||||
Panel |
||||
**SE3B/**SL5B |
||||
|
|
|||
model) |
|
|
||
Buttons |
Description |
INPUT |
Changes the input source. |
|
|
MENU |
Accesses the main menus, or saves your input and exits the menus. |
|
|
|
Adjust the up and down. |
|
|
|
Moves left and right. |
|
|
AUTO/SET |
Displays the current signal and mode. |
|
|
/ I |
Turns the power on or off. |
|
65SE3B 65SE3KB
ASSEMBLY AND PREPARATION 11
<![if ! IE]><![endif]>ENGLISH
<![if ! IE]><![endif]>LAN 5 V 1.0 A 5 V 1.0 A
<![if ! IE]><![endif]>USB 1 USB 2
|
|
|
|
<![if ! IE]> <![endif]>RGB IN |
|
|
|
|
|
<![if ! IE]> <![endif]>DVI-D IN |
|
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
Buttons
(Only for **SE3B model)
Buttons |
Description |
INPUT |
Changes the input source. |
MENU |
Accesses the main menus, or saves your input and exits the menus. |
|
Adjust the up and down. |
|
Moves left and right. |
AUTO/SET |
Displays the current signal and mode. |
/ I |
Turns the power on or off. |
|
|
|
|
Connection
Panel
<![endif]>ENGLISH
12 ASSEMBLY AND PREPARATION
Connecting the Stand |
|
|
|
43/49/55/65SE3* |
43/49/55SL5B |
-For certain models only.
-The image may be different according to the model
32SE3*
1Place a soft cloth on the table and place the product with the screen facing downward.
1Place a soft cloth on the table and place the product with the screen facing downward.
2 Tighten stand spacers on the back of the product as shown below.
2 Use the screws to secure the stand to the back of the product as shown below.
3 Use the screws to secure the stand to the back of the product as shown below.
ASSEMBLY AND PREPARATION 13
Connecting the Speakers
-For certain models only. (Only for **SE3B/**SL5B model)
-The image may be different according to the model.
32SE3B
1Connect an input signal cable before installing the speakers.
2Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.
3Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables.
43/49/55/65SE3B 43/49/55SL5B
1Connect an input signal cable before installing the speakers.
2Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.
3Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables.
<![endif]>ENGLISH
<![endif]>ENGLISH
14 ASSEMBLY AND PREPARATION
NOTE |
Using the IR Receiver |
|
•• Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may result in no sound.
-The image may be different according to the model.
This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Install the IR receiver towards the front of the set.
IR Receiver cable
NOTE
•• When you see from the back of the set, if the IR receiver cable does not face front, the signal reception range may shorten.
•• The IR receiver is made with a magnet.It is detachable at the bottom (typical installation) or back (wall installation) of the set.
•• Make sure that you unplug the power cord before connecting or removing the IR Receiver.
|
ASSEMBLY AND PREPARATION 15 |
Portrait Layout |
Using Kensington Lock |
When installing in a portrait layout, rotate the |
(This is not available for all models.) |
monitor counterclockwise 90 degrees (when facing |
The Kensington security system connector is |
the screen). |
located at the back of the monitor. For more |
|
information on installation and use of this system, |
|
refer to the manual provided with the Kensington |
|
security system or visit http://www.kensington. |
|
com. |
|
Connect the Kensington security system cable |
|
between the monitor and a table. |
NOTE
Kensington security system is optional. You can obtain additional accessories from most electronics retail stores.
<![endif]>ENGLISH
<![endif]>ENGLISH
16 ASSEMBLY AND PREPARATION
Attaching and removing the LG Logo Bracket
-For certain models only.
-The image may be different according to the model.
Removing the LG Logo
1Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.
Attaching the LG Logo on the right side
1Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor.
LG Logo Bracket
2After removing the screw, remove the LG Logo. When re-attaching the LG Logo, repeat the process in reverse order.
2After removing the screw, remove the LG Logo. Attach the LG Logo Bracket with a screw, aligning it with the hole on the right side.
ASSEMBLY AND PREPARATION 17
Installing on a Wall |
CAUTION |
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
10 cm 
|
10 cm |
10 cm |
10 cm |
10 cm 
To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
1Use only screws and wall mounting brackets that conform to VESA standards.
2Screws which are longer than standard length may damage the inside of the monitor.
3A non-VESA standard screw may damage the product and cause the monitor to fall. LG
Electronics is not liable for any accidents related to the use of non-standard screws.
4Please use VESA standard as below.
•• 785 mm and above
*Fixing screws: Diameter 6.0 mm x Pitch
1.0mm x Length 12 mm
•• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
•• If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
•• Do not over tighten the screws as this may damage the monitor and void your warranty.
•• Use only screws and wall mounting brackets that meet the VESA standard. Any damage or injuries caused by misuse or use of improper accessories are not covered by the warranty.
•• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions. (This pertains only to Australia and New Zealand.)
NOTE
•• The wall mount kit includes the installation guide and all necessary parts.
•• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer.
•• The length of screws required may differ depending on the wall mount. Be sure to use the correct length.
•• For more information, please refer to the guide provided with the wall mount.
•• The warranty will not cover any damages caused by using the product in an excessively dusty environment.
<![endif]>ENGLISH
785 mm
18 ASSEMBLY AND PREPARATION
| <![if ! IE]> <![endif]>ENGLISH |
|
Securing the monitor to a wall (optional) |
|
|||||
Procedure may differ depending on the model. |
||||||||
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor.
- If there are already bolts inserted in the eyebolts’ position, remove the other bolts first.
2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the monitor.
3Connect the eyebolts and wall brackets tightly with a sturdy cord.
Make sure the securing cord is horizontal with the flat surface.
CAUTION
sure that children do not climb on or hang from the monitor.
NOTE
a platform or cabinet that is large and strong enough to support the monitor securely.
•• Brackets, bolts, and cords are sold separately. You can obtain additional accessories from your local retail store.
•• The illustration shows a general example of installation and may look different from the actual product.
WARNING
monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
»»Using cabinets or stands recommended by the manufacturer.
»»Only using furniture that can safely support the monitor.
»»Ensuring the monitor is not overhanging the edge of the supporting furniture.
»»Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the monitor to a suitable support.
»»Not placing cloth or other materials between the monitor and supporting furniture.
»»Educating children about the dangers of climbing on furniture to reach the monitor or its controls.
REMOTE CONTROL 19
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching 
and 
terminals to the labels inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
CAUTION
•• Do not mix old and new batteries, as this may damage the remote control.
•• Be sure to point the remote control toward the remote control sensor on the monitor.
(POWER) Turns the monitor on or off.
MONITOR ON Turns the monitor on.
MONITOR OFF Turns the monitor off.
ENERGY SAVING(
) Adjusts the brightness of the picture to reduce
energy consumption.
INPUT Selects the input mode.
3D Used for viewing 3D videos. (This model does not support this.)
1/a/A Toggles between numerical and alphabetical.
(Depending upon the model, this feature may not be supported.)
Number and Alphabet buttons
Enters numerical or alphabetical characters depending upon the setting.
(Depending upon the model, this feature may not be supported.)
CLEAR Deletes the entered numerical or alphabetical character. (Depending upon the model, this feature may not be supported.)
Volume Up/Down Button Adjusts the volume.
ARC Selects the Aspect Ratio mode.
AUTO Automatically adjusts picture position and minimizes image instability (available for RGB input only). (Depending upon the
model, this feature may not be supported.) MUTE Mutes all sounds.
BRIGHTNESS Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list. (Depending upon the model, this feature may not be supported.)
<![endif]>ENGLISH
<![endif]>ENGLISH
20 REMOTE CONTROL
PSM Selects the Picture Mode.
INFO
Views the information of the currently program and the screen. W.BAL Enters the White Balance menu.
SETTINGS Accesses the main menus or saves your input and exit menus.
S.MENU SuperSign menu key (Depending upon the model, this feature
may not be supported.)
Navigation Buttons Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Allows you to move back one step in the user interaction function. EXIT Quit all OSD tasks and applications.
Allows you to control various multimedia devices to enjoy multimedia simply by using the remote control through the SimpLink menu. (Depending upon the model, this feature
may not be supported.) TILE Selects the TILE Mode.
PICTURE ID ON/OFF When the Picture ID number matches the Set ID number, you can control whichever monitor you want in multi-display format.
USB Menu Control Buttons Controls media playback.
REMOTE CONTROL 21
Displaying the Device Name Connected to an Input Port
Display which devices are connected to which external input ports.
1Access the Input list screen and press the red (input label) button on the remote control.
2You can assign an input label for every input except USB.
NOTE
•• External inputs supported : HDMI, DVI-D
•• Labels available : PC, DTV
•• The input labels are displayed on the Input Label screen or at the top left of the screen when you change the external input setting.
•• For DTV/PC-compatible signals, such as 1080p 60 Hz, the screen settings may change according to the input label. The Just Scan option is available if a PC is connected as an external device.
White Balance Adjust Menu
Press the W.BAL button on the remote control.
yyR-Gain : Adjusts the level of red. The higher
the number, the redder the set. Decrease the number if the screen looks too red.
yyG-Gain : Adjusts the level of green. The
higher the number, the greener the set. Decrease the number if the screen looks too green.
yyB-Gain : Adjusts the level of blue. The higher
the number, the bluer the set. Decrease the number if the screen looks too blue.
yyBacklight : Adjusts the brightness. The
higher the number, the brighter the set. This works in the same way as the backlight of the user menu.
yyReset : Resets the white balance value to the factory settings.
<![endif]>ENGLISH
<![endif]>ENGLISH
22 REMOTE CONTROL
Using Picture ID
Picture ID is used to change the settings of a specific display using a single IR receiver for multi-vision. The set receiving the IR signal communicates with another set via an RS-232C connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely.
IR Receiver
RS-232C
Picture ID
Off
Close
2X2 Multi-Vision
Set IDs are assigned as shown in the picture.
1Press the red ON button on the remote control to assign the Picture ID.
2To change the Picture ID, press the ON button, or the left and right arrow buttons continuously. Assign the ID you want.
•• If you assign the Set ID to each set with multivision, and then assign the Picture ID using the red button on the remote control, the key
command is displayed for the set with the same Set ID and Picture ID. A set with different Set IDs and Picture IDs cannot be controlled by IR signals.
NOTE
•• For example, if the Picture ID is assigned to 2, the upper right display (Set ID: 2) can be controlled by IR signals.
•• For each set, you can change the settings for the PICTURE, AUDIO, TIME, NETWORK and MY MEDIA menus or the hot keys on the remote control.
•• If you press the green OFF button for Picture IDs, the Picture IDs for all sets are turned off. If you then press any button on the remote control, all sets will start working again.
•• Picture ID will be disabled while using the MY MEDIA menu.
MAKING CONNECTIONS 23
MAKING CONNECTIONS
You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect.
For more information about external device connections, see the user manual provided with each device.
Connecting to a PC
The illustrations may differ from the actual accessories. Some of the cables are not provided. This monitor supports the Plug & Play* feature.
* Plug & Play: a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.
32/43/49/55SE3* 43/49/55SL5B
Mac |
<![if ! IE]> <![endif]>IN |
|
<![if ! IE]> <![endif]>RGB |
|
AUDIO OUT |
RGB OUT |
|
<![if ! IE]> <![endif]>IN |
|
|
|
|
|
|
<![if ! IE]> <![endif]>DVI-D |
|
|
|
(not included) |
|
|
|
|
|
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
(not included) |
|
|
|
|
|
|
|
(Only for **SE3B/ **SL5B model)
<![endif]>ENGLISH
HDMI OU |
(not included) |
|
|
|
AUDIO OUT |
DVI OUT |
|
|
|
(not included)
24 MAKING CONNECTIONS
65SE3*
<![if ! IE]><![endif]>ENGLISH
<![if ! IE]><![endif]>LAN
(not included)
(not included)
Mac
HDMI OUT
<![if ! IE]><![endif]>RGB IN
DVI OUT |
AUDIO OUT |
RGB OUT |
(not included)
<![endif]>DVI-D IN
(not included)
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
(Only for **SE3B model)
AUDIO OUT |
DVI OUT |
MAKING CONNECTIONS 25
External Device Connection
Connect a HD receiver, DVD, or VCR player to the monitor and select an appropriate input mode.
The illustrations may differ from the actual accessories. Some of the cables are not provided. For the best picture and sound quality, connecting external devices to your monitor using HDMI cables is recommended.
32/43/49/55SE3* 43/49/55SL5B
<![if ! IE]><![endif]>USB 2 5 V 1.0 A
|
03OR |
| <![if ! IE]> <![endif]>A |
USB |
| <![if ! IE]> <![endif]>USB1 V 1.0 |
(not included) |
|
|
| <![if ! IE]> <![endif]>5 |
|
|
|
|
|
<![if ! IE]> <![endif]>LAN |
(not included) |
|
|
|
|
|
|
|
|
|
|
|
Direct Connection/ |
|
|
|
|
|
Using the Router/ |
|
|
|
|
|
Using the Internet |
|
|
HDMI OUT |
|
<![if ! IE]> <![endif]>IN |
|
|
|
|
<![if ! IE]> <![endif]>RGB |
|
|
|
|
|
|
|
|
HD Receiver/DVD/VCR |
|
|
|
||
Camcorder/Camera/Gaming Device |
|
|
|
||
|
|
|
|
<![if ! IE]> <![endif]>DVI-D IN |
|
|
|
|
|
|
Network |
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
|
|
|
|
|
AV Receiver |
(Only for **SE3B/ **SL5B model) |
|
|
|
||
|
|
(not included) |
|
|
|
<![endif]>ENGLISH
(not included)
26 MAKING CONNECTIONS
65SE3*
<![if ! IE]><![endif]>ENGLISH
<![if ! IE]><![endif]>LAN 5 V 1.0 A 5 V 1.0 A
<![if ! IE]><![endif]>USB 1 USB 2
(not included)
03OR
USB
(not included)
(not included)
HDMI OUT
<![if ! IE]><![endif]>RGB IN
HD Receiver/DVD/VCR
Camcorder/Camera/Gaming Device
<![if ! IE]><![endif]>DVI-D IN
SPEAKER |
RS-232C RS-232C |
EXT IR |
AUDIO |
AUDIO |
|
OUT |
IN |
OUT |
IN |
IN |
OUT |
Network
Direct Connection/
Using the Router/
Using the Internet
(Only for **SE3B model)
AV Receiver |
(not included) |
|
Loading...