LG 47LS33A-5D, 47LS33A-5B, 42LS33A-5D Owner’s Manual
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
32LS33A
42LS33A
47LS33A
55LS33A
65LS33A
42LS35A
47LS35A
55LS35A
www.lg.com
TABLE OF CONTENTS
2
ENGLISH
TABLE OF CONTENTS
ENG
3 LICENSES
4 ASSEMBLING AND
4 Accessories
5 Optional Accessories
6 Parts and Buttons
7 Connecting the Stand
8 Connecting the Speaker
9 Using the IR Receiver
9 Portrait Layout
10 Mounting on a Wall
12 REMOTE CONTROL
14 MAKING CONNECTIONS
PREPARING
35 - Viewing the Contents List
36 CUSTOMIZING SETTINGS
36 Accessing Main Menus
37 - PICTURE Settings
40 - AUDIO Settings
41 - TIME Settings
42 - OPTION Settings
43 - NETWORK Settings
44 TROUBLESHOOTING
46 SPECIFICATIONS
62 IR CODES
15 RGB Connection
16 HDMI Connection
16 IR Receiver Connection
17 USB Connection
17 LAN Connection
18 USING THE MONITOR
18 Using the Input List
18 Adjusting Aspect Ratio
20 ENTERTAINMENT
20 Using the Network
20 - Connecting to a Wired Network
21 - Network Status
22 Using the My Media
22 - Connecting USB storage devices
24 - Browsing Files
27 - Viewing Movies
30 - Viewing Photos
32 - Listening to Music
63 CONTROLLING THE MULTIPLE
PRODUCT
63 Connecting the Cable
63 RS-232C Configurations
63 Communication Parameter
64 Command Reference List
66 Transmission / Receiving Protocol
LICENSES
3
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
has passed rigorous testing to verify that it plays DivX video. Visit divx.com for
more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies
To obtain your registration code, locate the DivX VOD section in your device
setup menu.
Go to vod.divx.com for more information on how to complete your registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium
content.
ENGLISH
DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
ASSEMBLING AND PREPARING
4
ENGLISH
ASSEMBLING AND PREPARING
ENG
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
Remote Control and
Batteries
Power Cord
IR Receiver
D-sub 15-pin Signal Cable
CD (Owner's Manual,
SuperSign Program/ Manual)/
Cards
CAUTION
Do not use any pirated items to ensure the safety and product life span.
y
Any damages or injuries by using pirated items are not covered by the warranty.
y
NOTE
The accessories supplied with your product may vary depending on the model.
y
Product specifications or contents in this manual may be changed without prior notice due to upgrade
y
of product functions.
ASSEMBLING AND PREPARING
5
Optional Accessories
Without prior notice, optional accessories are subject to change to improve the performance of the product,
and new accessories may be added. The illustrations in this manual may differ from the actual product and
accessories.
Stand
ST-321T 32LS33A
ST-421T 42LS33A/ 42LS35A
ST-471T
ST-651T 65LS33A
Diameter 4.0 mm x Pitch 0.7 mm
x Length 14 mm (Included Spring
47LS33A/ 47LS35A
55LS33A/ 55LS35A
Screws
Washer)
Speaker
SP-2100
Screws
Diameter 4.0 mm x Pitch
0.7 mm x Length 8 mm
(Included Spring Washer)
Cable holder/
Cable Tie
Screws
Diameter 4.0 mm x
Pitch 1.6 mm x Length
10 mm
ENGLISH
ENG
Stand kit Speaker kit
Media Player
MP500/ MP700
Screws CD(Owner's Manual)/
Cards
Media Player kit
NOTE
Cable holder/cable tie may not be available in some areas or for some models.
y
Optional accessories are not included for all models.
y
ASSEMBLING AND PREPARING
6
ENGLISH
Parts and Buttons
ENG
1
2
3
4
Connection Panel
5
6
Screen Buttons
No. Description
Moves the selection up and down.
1
Adjusts the volume level.
2
Displays the current signal and mode.
3
Press this button to adjust the screen automatically (available only in RGB mode)
Accesses the main menus, or saves your input and exits the menus.
4
Changes the input source.
5
Turns the power on or off.
6
ASSEMBLING AND PREPARING
7
Connecting the Stand
- Only on some models.
Place a soft cloth on the table and put the
1
product with the screen facing downward.
Use the screws to secure the stand on the rear
2
side of the product as shown in the diagram.
ENGLISH
ENG
ASSEMBLING AND PREPARING
8
ENGLISH
Connecting the Speaker
ENG
- Only on some models.
1
2
32LS33A
Connect the input signal cable to the monitor
before installing the speakers. Use a cable tie
to organize the cables.
Mount the speaker by using a screw as shown
in the following. Make sure the power cable is
disconnected.
42LS33A
42LS35A
47LS33A
47LS35A
55LS33A
55LS35A
65LS33A
Connect the input signal cable to the monitor
1
before installing the speakers. Use a cable tie
to organize the cables.
Mount the speaker by using a screw as shown
2
in the following. Make sure the power cable is
disconnected.
Then connect the speaker cable. After installing
3
your speakers, use holders and cable ties to
organize the speaker cables.
Then connect the speaker cable. After installing
3
your speakers, use holders and cable ties to
organize the speaker cables.
ASSEMBLING AND PREPARING
9
Using the IR Receiver
This allows a remote control sensor to be placed
in a custom location. The IR receiver is made with
a magnet. You can attach it to the monitor edge.
Using the Kensington security system
The Kensington security system connector is
located at the back of the monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
Connect the Kensington security system cable
between the monitor set and a table.
http://www.kensington.com
.
ENGLISH
ENG
Portrait Layout
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
NOTE
The Kensington security system is optional.
y
You can obtain additional accessories from
most electronics stores.
ASSEMBLING AND PREPARING
10
ENGLISH
Mounting on a Wall
ENG
For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
If you intend to mount the monitor to a wall, attach
a Wall mounting interface (optional parts) to the
back of the set.
When you install the monitor using a wall mounting
interface (optional parts), attach it carefully so it
will not fall.
10 cm
10 cm
10 cm
10 cm
10 cm
CAUTION
Disconnect the power cord first, and then
y
move or install the monitor set. Otherwise
electric shock may occur.
If you install the monitor set on a ceiling or
y
slanted wall, it may fall and result in severe
injury.
Use an authorized LG wall mount and
y
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the monitor set and void
your warranty.
Use the screws and wall mounts that meet
y
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
To prevent injury, this apparatus must be
y
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
NOTE
Please, use a wall mount and screws in
1
accordance with VESA Standards.
If you use screws longer than standard, the
2
monitor might be damaged internally.
If you use improper screws, the product might
3
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for damage.
Please use VESA standard as below.
4
785 mm or greater
y
* Fastening screw: Diameter 6.0 mm x Pitch 1.0
mm x Length 12 mm
785 mm
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
y
supplied with the wall mount.
The warranty will not cover any damages
y
caused by using the product in an
excessively dusty environment.
ASSEMBLING AND PREPARING
11
Securing the product to a wall (optional)
(Depending on model)
Insert and tighten the eye-bolts, or product
1
brackets and bolts on the back of the product.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
WARNING
If a product is not positioned in a sufficiently
y
stable location, it can be potentially
hazardous due to falling. Many injuries,
particularly to children, can be avoided by
taking simple precautions such as:
»Using cabinets or stands recommended
by the manufacturer of the product.
»Only using furniture that can safely
support the product.
»Ensuring the product is not overhanging
the edge of the supporting furniture.
»Not placing the product on tall furniture
(for example, cupboards or bookcases)
without anchoring both the furniture and
the product to a suitable support.
»Not standing the product on cloth or other
materials placed between the product
and supporting furniture.
»Educating children about the dangers of
climbing on furniture to reach the product
or its controls.
ENGLISH
ENG
Mount the wall brackets with the bolts to the
2
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the product.
Connect the eye-bolts and wall brackets tightly
3
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
y
hang on the product.
NOTE
Use a platform or cabinet that is strong and
y
large enough to support the product securely.
Brackets, bolts and ropes are optional. You
y
can obtain additional accessories from your
local dealer.
The illustration shows a general example of
y
installation and may look different from the
actual product.
REMOTE CONTROL
12
ENGLISH
REMOTE CONTROL
ENG
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the monitor set correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
y
may damage the remote control.
Make sure to point the remote control to the
y
remote control sensor on the monitor set.
(POWER)
Turns the monitor set on or off.
MONITOR ON
Turn on the monitor.
MONITOR OFF
Turn off the monitor.
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
INPUT
Selects the input mode.
1/a/A Button
Toggles between numerical
and alphabetical.
ARC
Selects the Aspect Ratio
Mode.
Volume Up / Down
Adjusts the volume level.
PSM
Selects the Picture Status
Mode.
MUTE
Mutes all sounds.
3D
This button selection is not
applicable.
Number and Alphabet buttons
Enters numerical or alphabetical
characters depending on the
setting.
CLEAR
Deletes the entered numerical
or alphabetical character.
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
REMOTE CONTROL
13
ENGLISH
ENG
INFO
Views the information of the
currently program and the
screen.
SETTINGS
Accesses the main menus
or saves your input and exit
menus.
OK
Selects menus or options and
confirms your input.
BACK
Allows the user to move back
one step in user interaction
function.
Allows you to control various
multimedia devices simply
by using the remote control
through the SimpLink menu.
(It may not be supported
depending on the model.)
ⓘ
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
W.BAL
This button selection is not
applicable.
S.MENU
(SuperSign Menu Key)
This button does not apply to
this model.
Navigation Buttons
Scrolls through menus or
options.
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
This button selection is not
applicable.
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
USB Menu control buttons
Controls media playback.
MAKING CONNECTIONS
14
ENGLISH
MAKING CONNECTIONS
ENG
Connect various external devices to the ports on the monitor set’s back panel.
1
2
3
HDMI
Find an external device you want to connect to your monitor set shown on the following illustration.
Check the connection type of the external device.
Go to the appropriate illustration and check the connection details.
HD Receiver DVD VCR
HDMI
Speaker
HDMI
USB
RGB
HDMI
LAN
PC
Camcorder/Camera
HDMI
Gaming device
HDMI
NOTE
If you connect a gaming device to the monitor set, use the cable supplied with the gaming device.
y
It is recommended you to use the optional speaker provided.
y
MAKING CONNECTIONS
15
Instructions for connecting to PC
Your monitor supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
NOTE
It is recommended you use an HDMI
y
connection for the best image quality.
Use a shielded signal interface cable, such
y
as D-sub 15-pin signal cable and DVI/HDMI
cable, with a ferrite core to maintain standard
compliance for the product.
If you turn the monitor set on when the set is
y
cold, the screen may flicker. This is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
If you use a cable longer than the D-sub 15-
y
pin signal cable provided, certain images
may appear blurry.
RGB Connection
Transmits an analog video signal from your PC to
the monitor. Connect the PC and the monitor with
the 15-pin signal cable as shown an following
illustration. Select RGB input. To transmit an audio
signal, connect an optional audio cable.
Back of the product.
Macintosh Adapter
(not included)
(not
included)
ENGLISH
ENG
CAUTION
Connect the signal
y
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the screen
y
for a long period of time to prevent image
burn. Use a screensaver if possible.
PC/MAC
NOTE
Use the standard
y
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Apple computers may require an adapter to
y
connect to this monitor. Call or visit their web
site for more information.
MAKING CONNECTIONS
16
ENGLISH
HDMI Connection
ENG
Transmits digital video and audio signals from
your PC or external device to the monitor. Connect
the PC or the external device and the Monitor
using the HDMI cable as shown in the following
diagrams. Select the HDMI input after connecting.
IR Receiver Connection
Allows the use of a wired remote or IR receiver
extension.
Back of the product.
Back of the product.
(not included)
NOTE
Use a High Speed HDMI™ Cable.
y
Please check the PC environment if you
y
cannot hear audio in HDMI mode. Some PCs
require you to manually change the default
audio output to HDMI.
If you want to use HDMI-PC mode, you must
y
set the input label to PC mode.
When HDMI PC is used, a compatiblity
y
problem might occur.
NOTE
Make sure the power cable is disconnected.
y
MAKING CONNECTIONS
Network
17
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the monitor set and
access the USB menu to use various multimedia
files.
or
LAN ConnectionUSB Connection
Using a router (Switch)
A
Monitor
Using the Internet.
B
ENGLISH
ENG
Switch
PC
Monitor
PC
USING THE MONITOR
18
ENGLISH
USING THE MONITOR
ENG
Using the Input List
1
2
Press
Press the navigation buttons to scroll to one of
INPUT
to access the
the input mode and press OK.
Input mode Description
RGB
HDMI
USB
View a PC display on the screen
Watch contents in a PC, DVD
of digital set-top box other high
definition devices
Plays the multimedia file saved in
the USB.
Input List
.
Adjusting Aspect Ratio
Resize the image to view the image at its optimal
size by pressing
monitor set.
Aspect Ratio
16:9
Just Scan
Set By Program
4:3
Zoom
Cinema Zoom
NOTE
ARC
MODE
while you are watching
RGB HDMI
PC DTV PC
o o o
x o x
x o x
o o o
x o x
x o x
You can also change the image size by
y
accessing the main menus.
The Just Scan mode operates when a video
y
signal has resolution of 720p or higher.
CAUTION
If a fixed image displays on the screen for a
y
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If you don't use your monitor, turn the power
y
off or set a screen saver program from the
PC or the system to prevent image retention.
If the aspect ratio is set to 4:3 for a long
y
period of time, image burn may occur on the
letterboxed area of the screen.
USING THE MONITOR
19
16:9
-
: This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
Just Scan
-
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
: This Selection will allow you view
4:3
-
: This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
Zoom
-
: This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
ENGLISH
ENG
Just Scan
Set By Program
signal, screen aspect ratio changes to 4:3 or
16:9.
: Depending on the input
Set By Program
Cinema Zoom
-
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
: Choose Cinema Zoom when
ENTERTAINMENT
20
ENGLISH
ENTERTAINMENT
ENG
Using the Network
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet provider or router manual.
Router
LAN
LAN WAN
To set up the network settings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
navigation and Number buttons. IP addresses
will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
@
Internet
Internet
Cable modem
ETHERNET
CAUTION
y Do not connect a modular phone cable to the
LAN port.
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
6 When you are finished, press EXIT.
CAUTION
y Network setting menu will not be avail-
able until the display connected to physical
network.
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENTERTAINMENT
21
NOTE
y If you want to access the Internet directly on
your display, the Internet connection should
always be on.
y If you cannot access the Internet, check
the network conditions from a PC on your
network.
y When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
y If you do not complete the network settings,
the network may not work properly.
Tips for Network setting
y Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
y Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or
connect the power cable again.
y Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
y LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
y LG is not responsible for problems within your
internet connection.
y You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
y Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
y Any fees charged by an ISP including, without
limitation, connection charges are your respon
sibility.
y A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
y A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
y The use of a router may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
Network Status
1 Press SETTINGS to access the main menus.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Network
Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option Description
Setting Return to the network setting menu.
Test
Close Return to the previous menu.
Test the current network status after setting the network.
ENGLISH
ENG
ENTERTAINMENT
22
ENGLISH
Using the My Media
ENG
Connecting USB storage devices
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features.
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My Media screen appears.
or
CAUTION
y Do not turn the display off or remove a USB
storage device while MY MEDIA menu is
activated, as this could result in loss of files
or damage to the USB storage device.
y Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
Tips for using USB storage devices
y Only a USB storage device is recognizable.
y If the USB storage device is connected
through a USB hub, the device is not recognizable.
y A USB storage device using an automatic
recognition program may not be recognized.
y A USB storage device which uses its own
driver will not be recognized.
y The recognition speed of a USB storage
device may depend on each device.
y Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such a
device is suddenly separated or unplugged,
the stored files or the USB storage device
may be damaged.
y Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction. Only use a USB storage device
which has normal music files, image files
or movie files.
y Please use only a USB storage device which
was formatted as a FAT32 file system, NTFS
file system by with the Windows operating
system. In case of a storage device formatted with a different utility programme which
is not supported by Windows, it may not be
recognized.
y Please connect power to a USB storage de-
vice (over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
y Please connect a USB storage device with
the cable included by the device maker.
y Some USB storage devices may not be sup-
ported or operate smoothly.
y File alignment method of USB storage devic-
es is similar to Window XP and the monitor
can recognize up to 100 English characters.
y Be sure to back up important files since data
stored on a USB memory device may be
damaged. We will not be responsible for any
data loss.
y If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source.
y If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
y If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
y If the USB memory device does not work
properly, disconnect and reconnect it.
y How fast a USB memory device is detected
differs from device to device.
y If the USB is connected in Standby Mode,
that drive will automatically be loaded when
the display is turned on.
y The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
y Any device with more than the recommend-
ed capacity may not work properly.
y If a USB external hard disk with a Energy
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
y USB storage devices below USB 2.0 are
supported as well. But they may not work
properly with videos.
y A maximum of 999 folders or files can be
recognized under one folder.
y It is recommended you use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
y Only a USB memory device can be used
to play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
y Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
y A USB 3.0 storage device may not work.
ENTERTAINMENT
23
ENGLISH
ENG
Loading...