LG 47LN5400-DA User guide

User Guide

This is a User Guide installed on the TV.

The contents of this guide are subject to change without prior notice for quality improvement.

To view program information

Press button.

Displays information on current program and / or current time, etc.

To set favorite channels

SETUP Channel Edit

1Select the channel you want.

2Press the button to select Favorite Group and then OK.

You can check your favorite channels by pressing the button on the remote control.

To use Favorites

Press button.

You can only view the channels you set as favorites.

Press button.

[In Digital mode only]

Obtains information about programs and airtime. Checks the broadcasting time of the desired program and scheduled viewing.

To set up the channels automatically

SETUP Auto Tuning

Memorizes automatically the channels being broadcast.

The channels will not be memorized properly if the antenna/cable is not installed correctly.

Auto Tuning memorizes the channels that are currently being broadcast.

If Lock System is turned on, a pop-up window will appear asking for password.

To set up the channels at manually

SETUP Manual Tuning

Adjusts channels manually and saves the results.

For digital broadcasting, signal strength, etc. can be checked.

To edit the channels

SETUP Channel Edit

Edits the saved channels.

PICTURE Aspect Ratio

Selects the screen aspect ratio.

•16:9: Resizes the image ratio to fit 16:9 screen.

•Just Scan: Displays high-quality image without loss.

In DTV, Component, HDMI, and DVI (over 720p) mode, Just Scan is available.

•Original: When your TV receives a wide screen signal it will automatically change to the picture format broadcast.

•Full Wide: When TV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. 4:3 and 14:9 video is supported in full screen with-out any video distortion through DTV input.

In DTV mode, Full Wide is available.

•4:3: Resizes the image ratio to fit 4:3 screen.

•14:9: You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved up or down.

•Zoom: Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.

•Cinema Zoom: Formats an image to the cinemascope ratio (2.35:1) and zooms in on the ratio.

While viewing an external device, these cases may result in image burn:

-a video with stationary caption (such as network name)

-4 : 3 aspect ratio mode for an extended period

Take caution when using these functions.

Available picture size may differ depending on the input signal.

At HDMI-PC or RGB-PC input, select the image ratios of 4:3 and 16:9. (Only for models supporting PC connection)

[Depending on model]

Press AV button.

Optimizes the TV’s Picture/Audio for different AV modes.

•Off: Views with the value set at the PICTURE/AUDIO Menu.

•Cinema: Optimizes picture and audio settings for movies.

•Game: Optimizes picture and audio settings for games.

To adjust pictures with Picture Wizard

PICTURE Picture Wizard

This function calibrates and adjusts for optimum picture quality with the remote control and the Picture Wizard without expensive pattern devices or help from a specialist.

Follow the instructions on the screen to obtain the optimum picture quality.

To select Picture Mode

PICTURE Picture Mode

Select the picture mode optimized for the viewing environment or the program.

•Eco: The Energy Saver feature changes settings on the TV to reduce power consumption.

•Expert: Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu for adjustment is provided for ISF-certified picture tuning professionals. (ISF logo can only be used on ISF-certified TVs.)

ISFccc: Imaging Science Foundation Certified Calibration Control

Depending on input signal, available range of picture modes may differ.

Expert mode is for picture tuning professionals to control and fine-tune using a specific image. For normal images, the effects may not be drastic.

To fine-tune picture mode

PICTURE Picture Mode Backlight / Contrast / Brightness / Sharpness / Color / Tint / Color Temp.

First select a Picture Mode of your choice.

•Backlight: Adjusts the display brightness by varying the brightness of the LCD panel.

Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.

To set advanced control

PICTURE Picture Mode Advanced Control / Expert Control

For each picture mode, screen can be calibrated; or for a special screen, picture settings can be adjusted.

Select the desired Picture Mode.

•Dynamic Contrast: Adjusts the contrast to the optimal level according to the image’s brightness.

•Dynamic Color: Adjusts colors to make the image appear in more natural colors.

•Skin Color: Skin color spectrum can be separately set to implement the skin color as defined by the user.

•Sky Color : Sky color is set separately.

•Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set.

•Gamma: Sets the gradation curve according to the output of picture signal in relation to the input signal.

•Color Gamut: Selects the range of colors that can be expressed.

•Edge Enhancer: Shows clearer and distinctive yet natural edges of the video.

•Expert Pattern: Patterns used for expert adjustment

•Color Filter: Filters a specific color spectrum in RGB colors to fine-tune color saturation and hue accurately.

•Color Temperature: Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Gamma method, etc.

•Color Management System: This system is used by experts to adjust color with a test pattern. They can select from six color areas (Red/ Green/Blue/ Cyan/Magenta/Yellow) without affecting other colors. For normal images, adjustments may not result in noticeable color changes.

Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.

To set additional picture options

PICTURE Picture Mode Picture Option

Adjusts detailed setting for images.

•Noise Reduction: Eliminates noise in the picture.

•MPEG Noise Reduction: Eliminates noise generated while creating digital picture signals.

•Black Level: Adjusts the screen’s brightness and contrast to fit them to the input picture’s black level by using the blackness (black level) of the screen.

•Real Cinema: Helps maintain the optimal state of the screen.

•Motion Eye Care: [Depending on model] Saves power consumption by adjusting the brightness corresponding to the movement of the image on the screen.

Depending on input signal or other picture settings, the range of detailed items for adjustment may differ.