LG 47LK520UA Users manual

Order Number : GETEC-C1-10-270 FCC Part 15 subpart B
Test Report Number : GETEC-E3-10-152 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: LCD TV/Monitor

FCC ID.: BEJ47LK520UA

LICENSES

2

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

ENGLISH

ENG

registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”

“DivX®, DivX Certified® and associated logos are registered trademarks of DivX,
Inc. and are used under license.”

OWNER’S MANUAL

LED LCD TV / LCD TV /
PLASMA TV

Please read this manual carefully before operating the
set and retain it for future reference.

LED LCD TV MODELS

19LV2500
22LV2500
26LV2500
32LV2500

32LV3520

32LV3500
37LV3500
42LV3500
47LV3500
55LV3500

42LV3520

P/NO : SAC34134216 (1012-REV01)

LCD TV MODELS

22LK330
26LK330
32LK330
32LK430
42LK430

32LK450
37LK450
42LK450
47LK450
42LK520
47LK520
55LK520

PLASMA TV MODELS

42PW340
50PW340
42PW350
50PW350

42PW350U
50PW350U
42PW350R

50PW350R
50PZ200
60PZ200

www.lg.com

“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”

NOTE

Plasma

: Plasma TV

y

Image shown may differ from your TV.

y

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

y

LCD

: LED LCD TV, LCD TV

IMPORTANT SAFETY INSTRUCTIONS

3

IMPORTANT SAFETY INSTRUCTIONS

4

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your product.

Read these instructions.
Keep these instructions.
Heed all warning.
Follow all instruction.

Do not use this apparatus near water.

TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.

The lightning flash with arrowhead
symbol, within an equilateral triangle,

is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert

the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

- TO PREVENT FIRE OR SHOCK HAZARDS,
DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.

y

Clean only with dry cloth.

y

Do not block any ventilation openings. Install

y

in accordance with the manufacturer’s
instructions.

Do not install near any heat sources such

y

as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

Do not defeat the safety purpose of the

y

polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.

ENGLISH

ENG

ENGLISH

ENG

Protect the power cord from being walked on

y

or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.

Only use attachments/accessories specified

y

by the manufacturer.

Use only with a cart, stand, tripod, bracket,

y

or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Unplug this apparatus during lightning

y

storms or when unused for long periods of
time.

Refer all servicing to qualified service

y

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.

Never touch this apparatus or antenna during

y

a thunder or lightning storm.

When mounting a TV on the wall, make sure

y

not to install the TV by hanging the power
and signal cables on the back of the TV.

Do not allow an impact shock or any objects

y

to fall into the product, and do not drop
anything onto the screen.

CAUTION concerning the Power Cord

y

(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord
to unplug the TV.

- To reduce the risk of fire or

Warning

y

electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.

IMPORTANT SAFETY INSTRUCTIONS

5

IMPORTANT SAFETY INSTRUCTIONS

6

Do not expose to dripping or splashing and

y

do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).

Grounding

y

Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

DISCONNECTING DEVICE FROM THE MAIN

y

POWER

The power outlet must remain readily
accessed in the event the device needs to
be unplugged.

As long as this unit is connected to the AC

y

wall outlet, it is not disconnected from the
AC power source even if the unit is turned
off.

Do not attempt to modify this product in any

y

way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this
product.

ANTENNAS Outdoor antenna grounding

y

(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the

U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.

Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Ground Clamp

Electric Service

Equipment

Ground Clamp

Cleaning

y

NEC: National Electrical Code

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Power Service Grounding
Electrode System
(NEC Art 250, Part H)

When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals
such as alcohol, thinners or benzine.

Moving

y

Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.

Ventilation

y

Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials while
plugged. Do not install in excessively dusty
places.

If you smell smoke or other odors coming

y

from the TV, unplug the power cord contact
an authorized service center.

Do not press strongly upon the panel with

y

hand or sharp object such as nail, pencil or
pen, or make a scratch on it.

Keep the product away from direct sunlight.

y

ENGLISH

ENG

ENGLISH

ENG

Dot Defect

y

The Plasma or LCD panel is a high
technology product with resolution of two
million to six million pixels. In a very few
cases, you could see fine dots on the screen
while you’re viewing the TV. Those dots
are deactivated pixels and do not affect the
performance and reliability of the TV.

Generated Sound

y

“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required.
Electrical circuit humming/panel buzzing: A
low level noise is generated from a high­speed switching circuit, which supplies a
large amount of current to operate a product.
It varies depending on the product.
This generated sound does not affect the
performance and reliability of the product.

Viewing 3D Imaging (For 3D TV)

y

- When viewing 3D imaging, watch the TV
from an effective viewing angle and within
the appropriate distance. If you exceed this
viewing angle or distance, you may not be
able to view the 3D imaging. Furthermore,
the 3D imaging may not display if it is viewed
while you are lying down.

- If you watch the 3D imaging too closely or
for a long period of time, it may harm your
eyesight.

- Watching the TV or playing video games
that incorporate 3D imaging with the 3D
glasses for a long period of time can cause
drowsiness, headaches or fatigue to you
and/or your eyes. If you have a headache,
or otherwise feel fatigued or drowsy, stop
watching the TV and take a rest.

- Pregnant woman, seniors, persons with
heart problems or persons who experience
frequent drowsiness should refrain from
watching 3D TV.

- Some 3D imaging may cause you to duck
or dodge the image displayed in the video.
Therefore, it is best if you do not watch 3D
TV near fragile objects or near any objects
that can be knocked over easily.

- Please prevent children under the age of
5 from watching 3D TV. It may affect their
vision development.

- Warning for photosensitization seizure: Some
viewers may experience a seizure or epilepsy
when exposed to certain factors, including
flashing lights or images in TV or video
games. If you or anybody from your family
has a history of epilepsy or seizure, please
consult with your doctor before watching 3D
TV.

Also certain symptoms can occur in

unspecified conditions without any previous
history. If you experience any of the following
symptoms, immediately stop watching the
3D imaging and consult a doctor: dizziness or
lightheadedness, visual transition or altered
vision, visual or facial instability, such as eye
or muscle twitching, unconscious action,
convulsion, loss of conscience, confusion
or disorientation, loss of directional sense,
cramps, or nausea. Parents should monitor
their children, including teenagers, for these
symptoms as they may be more sensitive to
the effects of watching 3D TV.

Risk of photosensitization seizure can be

reduced with the following actions.

- Take frequent breaks from watching 3D TV.

- For those who have vision that is different
in each eye, they should watch the TV after
taking vision correction measures.

- Watch the TV so that your eyes are on the
same level as the 3D screen and refrain from
sitting too closely to the TV.

- Do not watch the 3D imaging when tired or
sick, and avoid watching the 3D imaging for a
long period of time.

- Do not wear the 3D glasses for any other
purpose than viewing 3D imaging on a 3D TV.

- Some viewers may feel disoriented after
watching 3D TV. Therefore, after you watch
3D TV, take a moment to regain awareness
of your situation before moving.

LCD

y

If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This
is normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.

DISPOSAL

The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out
in accordance to the regulations of your local
authority.

(Hg lamp only used in LCD TVs)

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the
equipment and the receiver.

- Connect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.

- Consult the dealer or an experienced radio/
TV technician for help.

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation of the device.
Any changes or modifications in construction of
this device which are not expressly approved
by the party responsible for compliance
could void the user’s authority to operate the
equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of the cable
entry as practical.

7

TABLE OF CONTENTS

8

TABLE OF CONTENTS

ENGLISH

ENG

2 LICENSES

3 IMPORTANT SAFETY IN-

STRUCTIONS

8 TABLE OF CONTENTS

10 ASSEMBLING AND PREPARING

10 Unpacking
13 Optional Extras
14 Parts and buttons
21 Lifting and moving the TV
21 Setting up the TV
21 - Attaching the stand

ENGLISH

ENG

27 - Mounting on a table
29 - Mounting on a wall
30 - Tidying cables

31 REMOTE CONTROL

34 WATCHING TV

34 Connecting to an antenna or cable
34 - Connecting an antenna or basic cable
34 - Connecting a cable box
35 Turning the TV on for the first time
36 Watching TV
36 Managing channels
36 - Setting up channels
37 - Using favorite channels
38 - Checking current program info
40 Using additional options
40 - Adjusting aspect ratio
41 - Changing AV modes
41 - Using the input list
42 - Locking the buttons on the TV (Child

Lock)

42 Using the quick menu
43 Using the customer support
43 - Testing the Picture / Sound
43 - Using the product or service informa-

tion

44 3D IMAGING (FOR 3D TV)

44 3D Technology
45 - When using 3D Glasses
45 - 3D Imaging
46 Viewing 3D Imaging

Viewing Range

48 ENTERTAINMENT

48 - Connecting USB storage devices
49 - Browsing files
51 - Viewing Videos
54 - DivX registration code
55 - Viewing Photos
57 - Listening to music

59 CUSTOMIZING TV SETTINGS

59 The Main Menus

60 Customizing Settings
60 - CHANNEL Settings
61 - PICTURE Settings
65 - AUDIO Settings
66 - TIME Settings
67 - LOCK Settings
69 - OPTION Settings

71 MAKING CONNECTIONS

72 Connection Overview
73 Connecting to a HD receiver, DVD, or

VCR player
73 - HDMI
73 - DVI to HDMI Connection
74 - Component Connection

Connection

TABLE OF CONTENTS

9

ASSEMBLING AND PREPARING

10

ASSEMBLING AND PREPARING

74 - Composite Connection
75 - RGB Connection
75 Connecting to an

Audio System

75 - Digital optical audio connection
76 Connecting to a USB

LCD

76 Connecting to a Headphone (
76 SIMPLINK

Connection

)

76 - Activating and Using the SIMPLINK

menus

78 MAINTENANCE

78 Cleaning Your TV
78 - Screen and frame
78 - Cabinet and stand
78 - Power cord
78 Preventing “Image burn” or “Burn-in” on

your TV screen

79 TROUBLESHOOTING

81 SPECIFICATIONS

87 IR CODES

ENGLISH

ENG

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

AV MODE

INPUT

ENERGY

TV

SAVING

123

456

7809

FLASHBK

LIST

MARK

FAV

P
A
G

3D

CHVOL

E

MUTE

INFO

MENU

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

Remote control and batteries (AAA) Owner’s manual CD

ENGLISH

ENG

Polishing cloth

(Depending on model)

1 Gently wipe the spots on the cabinet with the polishing cloth.

1

89 EXTERNAL CONTROL DEVICE

SETUP

96 OPEN SOURCE LICENSE

ASSEMBLING AND PREPARING

11

ASSEMBLING AND PREPARING

12

PW340, PW350, PW350U, PW350R, PZ200 series

(Other models)

x 4

M4 x 26

M5 x 14.5

x 3

(For 60PZ200)

x 4

M4 x 28

M5 x 25

x 3

Screw for assembly Cable holder Power Cord holder

(For 42PW340,
42PW350)

x 2

(For 50PW340,
50PW350)

x 3

Power Cord Protection cover Ferrite core

Protection cover tape

LV3500 series

(For 32LV3500)

x 8

M4 x 12

Screw for assembly Composite gender cable Cable holder Screw for fixing

ENGLISH

ENG

ENGLISH

ENG

26/32LK330, LK430, LK450, LK520 series

(Except 47LK450,

47/55LK520)

x 8

M4 x 20

Screw for assembly Screw for fixing Protection cover Power Cord

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

NOTE

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

y

upgrade of product functions.
How to use the ferrite core

y

- (For PW340, PW350 series)
Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device]

- (For 42PW340, 42PW350)
Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV.

[to a wall plug]

10 mm (+/-5 mm)

10 mm (+/-5 mm)

[to the TV]

[to the TV]

LV2500 series

x 2

M4 x 16

M4 x 6

Screw for assembly Cable holder

22LK330

Cable holder Protection cover Power Cord

- (For 50PW340, 50PW350)
Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall
plug.

[to a wall plug]

LCD

(

) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

y

10 mm (+/-5 mm)

10 mm (+/-5 mm)

[to the TV]

(0.39 inches) thick and 18 mm (0.7 inches) width.

B

B

A

A

*A 10 mm (0.39 inches)
*B

18 mm (0.7 inches)

ASSEMBLING AND PREPARING

13

ASSEMBLING AND PREPARING

14

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG LED LCD TV, LCD TV, or Plasma TV.

3D Glasses

D-sub 15 pin signal cable

(AG-S230, AG-S250, AG-S270)

1 When using the VGA (D-sub 15 pin signal cable) PC connection, use the shielded signal interface cable

with a ferrite core to maintain standards compliance for the product.

1

ENGLISH

ENG

Parts and buttons

PW340, PW350, PW350U, PW350R, PZ200 series

Side Connection panel

ENGLISH

ENG

USB input

HDMI input

AV (Audio
and Video)
input

R

AUDIO

L/MONO

VIDEO

AV IN 2

REMOTE

CONTROL IN

USB ININ 3

2

1

/DVI IN

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

VIDEO

RGB IN (PC)

Y

Screen

Remote control and
intelligent

1

sensors

Speakers

HOME

INPUT

ENTER

AV IN 1

L/MONO

R

AUDIO

AUDIO IN
(RGB/DVI)

2

R

P

R

L

P

B

VIDEO

AUDIO

1

COMPONENT IN

VOL

ANTENNA

/CABLE

IN

CH

Touch buttons

Rear Connection panel
(See p.71)

2

2

Turns the power on or off.

Description

/

I

Touch button

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ASSEMBLING AND PREPARING

15

ASSEMBLING AND PREPARING

16

32LV2500, LV3500 series

/ DVI IN

LAN

OPTICAL
DIGITAL

AUDIO OUT

RS-232C IN

Screen

Speakers

CH

(RGB/DVI)

AUDIO IN

AV IN 1

VIDEO

RGB IN (PC)

L/MONO

AUDIO

(CONTROL & SERVICE)

R

21

VOL

COMPONENT IN

VIDEO

AUDIO

2

OPTICAL DIGITAL

AUDIO OUT

Y

P

B

P

R

L

R

ANTENNA/
CABLE IN

1

ENTER

ANTENNA /

CABLE IN

19/22/26LV2500

(RGB/DVI)
AUDIO IN

1

VIDEO

L/MONO

AUDIO

R

AV IN

CH

Screen

Speakers

VOL

ENTER

COMPONENT IN

Y

VIDEO

P

B

P

R

L

AUDIO

R

HOME

ANTENNA

IN

INPUT

CABLE

IN

Rear Connection panel
(See p.71)

Remote control and
intelligent

1

sensors

Power indicator

Touch buttons

2

Side Connection panel

Remote control and
intelligent

1

sensors

USB input

USB IN

Power indicator

Headphone

ENGLISH

ENG

output

DC-IN

/ DVI IN

OPTICAL
DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN(CONTROL & SERVICE)

2

INPUT

HOME

Touch buttons

USB IN

USB IN

IN 3

IN 3

H/P

AV IN 2

VIDEO / AUDIO

Rear Connection panel
(See p.71)

2

ENGLISH

ENG

Touch button

2

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

Touch button

2

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

17

ASSEMBLING AND PREPARING

18

LK450 series

Side Connection panel

USB input

HDMI input

Headphone
output

AV (Audio
and Video)
input

USB IN

IN 3

R

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

2

(RGB/DVI)
AUDIO IN

1

AV IN 1

VIDEO

L/MONO

AUDIO

R

Screen

CH

COMPONENT IN

VIDEO

AUDIO

2

Speakers

VOL

Y

P

B

P

R

L

R

1

ENTER

ANTENNA /

CABLE IN

LK330 series

(For 22LK330)

2

ANTENNA /

CABLE IN

Buttons

Screen

(For 26/32LK330)

CH

VOL

ENTER

HOME

INPUT

Remote control and
intelligent

Power indicator

Rear Connection panel
(See p.71)

1

sensors

Buttons

2

VOL

COMPONENT IN

VIDEO

AUDIO

2

CH

Y

P

B

P

R

L

R

1

HOME

INPUT

(RGB/DVI)
AUDIO IN

RGB IN (PC)

(CONTROL & SERVICE)

1

ENTER

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

R

Side Connection panel

USB input

Remote control and
intelligent

1

sensors

Power indicator

HDMI input

Headphone

ENGLISH

ENG

output

AV (Audio
and Video)
input

INPUT

HOME

Touch buttons

Rear Connection panel
(See p.71)

2

ENGLISH

ENG

USB IN

IN 3

R

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RS-232C IN

2

Touch button

2

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

2

Button

/

I

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

19

ASSEMBLING AND PREPARING

20

LK430 series

Side Connection panel

USB input

HDMI input

Headphone
output

AV (Audio
and Video)
input

USB IN

IN 3

R

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

2

Screen

(RGB/DVI)
AUDIO IN

1

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

R

COMPONENT IN

VIDEO

AUDIO

2

LK520 series

Side Connection panel

CH

VOL

ENTER

HOME

INPUT

Remote control and
intelligent

1

sensors

Power indicator

Y

P

B

P

R

ANTENNA /

L

CABLE IN

R

1

Rear Connection panel
(See p.71)

Buttons

2

ENGLISH

ENG

ENGLISH

ENG

USB input

HDMI input

Headphone
output

AV (Audio
and Video)
input

USB IN

IN 3

R

AUDIO

L/MONO

VIDEO

AV IN 2

/ DVI IN

OPTICAL DIGITAL

AUDIO OUT

RGB IN (PC)

RS-232C IN

(CONTROL & SERVICE)

2

Screen

(RGB/DVI)
AUDIO IN

1

Speakers

AV IN 1

VIDEO

L/MONO

AUDIO

R

COMPONENT IN

VIDEO

AUDIO

2

CH

VOL

ENTER

HOME

INPUT

Remote control and
intelligent

1

sensors

Buttons

2

Power indicator

Y

P

B

P

R

ANTENNA /

L

CABLE IN

R

1

Rear Connection panel
(See p.71)

2

Button

/

I

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

2

Button

/

I

Turns the power on or off.

Description

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ٜ

ENTER

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

v

CH

^

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

NOTE

You can set the power indicator light to on or off by selecting

y

in the main menus.

OPTION

ASSEMBLING AND PREPARING

21

ASSEMBLING AND PREPARING

22

Lifting and moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.

CAUTION

Avoid touching the screen at all times, as

y

this may result in damage to the screen.

It is recommended to move the TV in the

y

box or packing material that the TV originally
came in.
Before moving or lifting the TV, disconnect

y

the power cord and all cables.
When holding the TV, the screen should face

y

away from you to prevent damage.

Hold the top and bottom of the TV frame

y

firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

When transporting a large TV, there should

y

be at least 2 people.
When transporting the TV by hand, hold the

y

TV as shown in the following illustration.

Setting up the TV

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

Attaching the stand

PW340, PW350, PW350U, PW350R, PZ200 series

Lay the TV with the screen side down on a flat

1

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from
damage. Make sure
against the screen.

Assemble the parts of the STAND BODY with

2

the STAND BASE of the TV.

Model Screw for

42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200

60PZ200 M4 x 25 3

no objects press

assembly

M5 x 14.5 3

Number of
screws

ENGLISH

ENG

ENGLISH

ENG

Secure the TV and the stand with the 4

3

screws.

Model Screw for

42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200

60PZ200 M4 x 28 4

assembly

M4 x 26 4

Number of
screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over
tighten.

To detach the stand,

Lay the TV with the screen side down on a flat

1

surface.

Remove the 4 screws and pull the stand away

2

from the TV.

Model Screw for

42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200

60PZ200 M4 x 28 4

Push the supplied protection cover into the

3

opening at the bottom of the TV until it locks in
place.

Attach the protection cover tape.

- This will protect the opening from
accumulating dust and dirt.

- When installing the wall mounting bracket,
use the Protection cover.

assembly

M4 x 26 4

Number of
screws

Protection
cover tape

When transporting the TV, do not expose the

y

TV to jolts or excessive vibration.
When transporting the TV, keep the TV

y

upright, never turn the TV on its side or tilt
towards the left or right.

Protection cover

ASSEMBLING AND PREPARING

23

ASSEMBLING AND PREPARING

24

LV3500 series

Lay the TV with the screen side down on a flat

1

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from
damage. Make sure no objects press
against the screen.

Assemble the parts of the STAND BODY with

2

the STAND BASE of the TV.

Model Screw for

32/37/42/47/55
LV3500

Secure the TV and the stand with the 4

3

assembly

M4 x 12 4

screws.

Model Screw for

32/37/42/47/55
LV3500

assembly

M4 x 12 4

Number of
screws

Number of
screws

To detach the stand,

Lay the TV with the screen side down on a flat

1

surface.

Remove the 4 screws and pull the stand away

2

from the TV.

Model Screw for

32/37/42/47/55
LV3500

assembly

M4 x 12 4

Number of
screws

ENGLISH

ENG

ENGLISH

ENG

LV2500 series

Lay the TV with the screen side down on a flat

1

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from
damage. Make sure no objects press
against the screen.

Assemble the parts of the STAND BODY with

2

the STAND BASE of the TV.

Model Screw for

19/22/26/32
LV3500

Secure the TV and the stand with the 2

3

assembly

M4 x 6 1

screws.

Model Screw for

19/22/26/32
LV3500

assembly

M4 x 16 2

Number of
screws

Number of
screws

To detach the stand,

Lay the TV with the screen side down on a flat

1

surface.

Remove the 2 screws and pull the stand away

2

from the TV.

Model Screw for

19/22/26/32
LV3500

assembly

M4 x 16 2

Number of
screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over
tighten.

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over
tighten.

ASSEMBLING AND PREPARING

25

ASSEMBLING AND PREPARING

26

22LK330

Lay the TV with the screen side down on a flat

1

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from
damage. Make sure no objects press
against the screen.

Assemble the TV as shown.

2

To detach the stand,

Lay the TV with the screen side down on a flat

1

surface.

Remove the screws and pull the stand away

2

from the TV.

Push the supplied protection cover into the

3

opening at the bottom of the TV until it locks in
place.

This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.

Protection cover

ENGLISH

ENG

26/32LK330, LK430, LK450, LK520 series

Lay the TV with the screen side down on a flat

1

surface.

CAUTION

Lay a foam mat or soft protective cloth

y

on the surface to protect the screen from
damage. Make sure no objects press
against the screen.

Assemble the parts of the STAND BODY with

2

the STAND BASE of the TV.

ENGLISH

ENG

Model Screw for

22/26LK330
32/42LK430
32/37/42/47 LK450
42/47/55LK520

Secure the TV and the stand with the 4

3

screws.

Model Screw for

22/26LK330
32/42LK430
32/37/42/47 LK450
42/47/55LK520

assembly

M4 x 20 4

assembly

M4 x 20 4

Number of
screws

Number of
screws

To detach the stand,

Lay the TV with the screen side down on a flat

1

surface.

Remove the 4 screws and pull the stand away

2

from the TV.

Model Screw for

22/26LK330
32/42LK430
32/37/42/47 LK450
42/47/55LK520

Push the supplied protection cover into the

3

opening at the bottom of the TV until it locks in
place.

This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.

assembly

M4 x 20 4

Number of
screws

CAUTION

Tighten the screws firmly to prevent

y

the TV from tilting forward. Do not over
tighten.

Protection cover

ASSEMBLING AND PREPARING

27

ASSEMBLING AND PREPARING

28

Mounting on a table

Lift and tilt the TV into its upright position on a

1

table.

- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.

10 cm

(4 inches)

10 cm

Connect the power cord to a wall outlet.

2

CAUTION

Do not place the TV near or on sources

y

of heat, as this may result in fire or other
damage.

NOTE

Swivel 20 degrees to the left or right and

y

adjust the angle of the TV to suit your
view.

10 cm

10 cm

2020

Securing the TV to a table

(For 26/32LK330, 32/42LK430, 32/37/42LK450,
42LK520, 32LV3500)

Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the
stand.

WARNING

To prevent TV from falling over, the TV

y

should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.

ENGLISH

ENG

Securing the TV to a wall (optional)

Insert and tighten the eye-bolts, or TV brackets

1

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts
position, remove the bolts first.

Mount the wall brackets with the bolts to the

2

ENGLISH

ENG

wall.
Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

Connect the eye-bolts and wall brackets tightly

3

with a sturdy rope.
Make sure to keep the rope horizontal with the

flat surface.

CAUTION

Make sure that children do not climb on or

y

hang on the TV.

NOTE

Use a platform or cabinet that is strong and

y

large enough to support the TV securely.
Brackets, bolts and ropes are optional. You

y

can obtain additional accessories from your
local dealer.

Using the Kensington security system (optional)

The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.

Connect the Kensington security system cable
between the TV and a table.

NOTE

The Kensington security system is optional.

y

You can obtain additional accessories from
your local dealer.

ASSEMBLING AND PREPARING

29

ASSEMBLING AND PREPARING

30

Mounting on a wall

Attach an optional wall mount at the rear of the TV
carefully and install the wall mount on a solid wall
perpendicular to the floor. When you attach the TV
to other building materials, please contact qualified
personnel.

10 cm

(4 inches)

10 cm

10 cm

Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.

Model 42/50PW340

VESA (A x B) 400 x 400 600 x 400
Standard screw M6 M8
Number of screws 44
Wall mount bracket

(optional)

Model 19/22/26LV2500

VESA (A x B) 100 x 100 200 x 100
Standard screw M4 M4
Number of screws 44
Wall mount bracket

(optional)

42/50PW350
42/50PW350U
42/50PW350R
50PZ200

PSW400B,
PSW400BG,
DSW400BG

22/26LK330

LSW100B,
LSW100BG

10 cm

60PZ200

PSW600B

32LV2500
32LV3500
32LK330
32LK430
32LK450

LSW100B,
LSW100BG

Model 37LV3500

VESA (A x B) 200 x 200 400 x 400
Standard screw M6 M6
Number of screws 44
Wall mount bracket

(optional)

42LK430
37/42/47LK450
42/47LK520

LSW200B,
LSW200BG

CAUTION

Disconnect the power first, and then move

y

or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted

y

wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may

y

cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet

y

the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.

NOTE

Use the screws that are listed on the VESA

y

standard screw specifications.
The wall mount kit includes an installation

y

manual and necessary parts.
The wall mount bracket is optional. You can

y

obtain additional accessories from your local
dealer.
The length of screws may differ depending

y

on the wall mount. Make sure to use the
proper length.
For more information, refer to the manual

y

supplied with the wall mount.

42/47/55LV3500
55LK520

LSW400B,
LSW400BG,
DSW400BG

ENGLISH

ENG

Tidying cables

PW340, PW350, PW350U, PW350R, PZ200 series

Install the power cord holder and power cord.

1

It will help prevent the power cable from being
removed by accident.

(Other models)

Power cord holder

Gather and bind the cables with the cable

2

holder.

ENGLISH

ENG

CAUTION

Do not move the TV by holding the cable

y

holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.

(For 60PZ200)

Cable holder

22LK330, LV2500, LV3500 series

Gather and bind the cables with the cable

1

holder.

Cable holder

26/32LK330, LK430, LK450, LK520 series

Gather and bind the cables with the cable

1

management clip.

Fix the cable management clip firmly to the TV.

2

Cable management clip

REMOTE CONTROL

ENERGY

123

456

7809

SAVING

TV

AV MODE

INPUT

LIST

FLASHBK

ENERGY

123

456

7809

SAVING

TV

AV MODE

INPUT

LIST

FLASHBK

REMOTE CONTROL

31

REMOTE CONTROL

32

The descriptions in this manual are based on the buttons of the remote
control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching

and ends to the label inside the compartment, and close
the battery cover. Be sure to point the remote control at the remote control
sensor on the TV.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

y

Make sure to point the remote control at the remote control sensor on the TV.

POWER
Turns the TV on or off.

ENERGY SAVING (See p.61)
Adjusts the Energy Saving settings.

AV MODE (See p.41)
Selects an AV mode.

INPUT (See p.41)
Rotates through inputs.
Also switches the TV on from standby.

TV
Returns to the last TV channel.

Alphanumeric buttons
Enters letters and numbers.

LIST (See p.37)
Accesses the saved channel list.

- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.

FLASHBK
Alternates between the two last channels selected (pressing repeatedly);
Selects a channel on the currently selected channel list.

ENGLISH

ENG

ENGLISH

ENG

INFO

INFO

BACK

BACK

MARK

FAV

3D

MUTE

Home

ENTER

MARK

FAV

RATIO

MUTE

Home

ENTER

CHVOL

Q.MENU

EXIT

CHVOL

Q.MENU

EXIT

VOL

P
A
G
E

P
A
G
E

Adjusts the volume level.

MARK
Selects a menu or option.
FAV (See p.37)
Accesses your favorite channel list.

3D (See p.44)
Used for viewing 3D video.

MUTE
Mutes all sounds.

CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.

VOL
Adjusts the volume level.

MARK
Selects a menu or option.
FAV (See p.37)
Accesses your favorite channel list.

RATIO (See p.40)
Resizes an image.

MUTE
Mutes all sounds.

CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.

REMOTE CONTROL

33

WATCHING TV

34

WATCHING TV

INFO

BACK

Home

ENTER

Q.MENU

EXIT

3D SETTING

INFO (See p.38)
Views the information of the

Home
Accesses the main menus, or saves your input and exit the menus.

Q. MENU (See p.42)
Accesses the quick menu.

Navigation buttons (up/down/left/right)
Scrolls through menus or options.

BACK
Allows the user to move back one step in an interactive application or
other user interaction function.

SIMPLINK (See p.76)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.

EXIT
Clears all on-screen displays and returns to TV viewing.

Colored buttons
These access special functions in some menus.

3D SETTING (
Used for viewing 3D video.

Plasma

) (See p.46)

current program.

ENGLISH

ENG

Connecting to an antenna or
cable

Connect an antenna, cable, or cable box to watch
TV referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.

Connecting an antenna or basic
cable

Connect the TV to a wall antenna socket with a
RF cable (75 Ω).

ENGLISH

ENG

Connecting a cable box

Connect the TV to a cable box and the cable box
to a wall antenna socket with 2 RF cables (75 Ω).

FREEZE

RATIO

Control buttons
Controls the SIMPLINK compatible devices (USB,SIMPLINK).

Plasma

FREEZE (
Freezes the current frame (
Simplink.).

RATIO (See p.40)
Resizes an image.

)

Not supported when using USB Mode and

NOTE

Use a signal splitter to use more than 2 TVs.

y

If the image quality is poor, install a signal

y

amplifier properly to improve the image
quality.
If the image quality is poor with an antenna

y

connected, aim the antenna to the proper
direction.
Visit http://lgknowledgebase.com for more

y

information about the antenna and cable
connection. Search for antenna.

CAUTION

Make sure not to bend the copper wire of

y

the RF cable.

Copper wire

Complete all connections between devices,

y

and then connect the power cord to the
power outlet to prevent damage to your TV.

Turning the TV on for the first
time

When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.

Connect the power cord to a power outlet.

1

The Power indicator turns red and the TV
switches to Standby mode.

In Standby mode, press

2

TV on.
The Initial setting screen appears if you turn

the TV on for the first time.

NOTE

You can also access

y

accessing

Follow the on-screen instructions to customize

3

your TV settings according to your preferences.

Language

OPTION

in the main menu.

Ø

Mode Setting

Ø

Power Indicator

(LED LCD TV)

Ø

Time Zone

Ø

Auto Tuning

NOTE

To display images in the best quality for

y

your home environment, select

.

Use
Store Demo

y

environment.
If you select

y

customized settings will switch
the default settings of
minutes.

Power Indicator

y

Store Demo mode.

is suitable for the retail

Store Demo

feature is

to turn the

POWER

Home Use

Home

, any

back to

disabled in

by

for

in 3

Initial Setting

Selects a language to
display.

Selects
the home environment.

Sets the power indicator.

Selects the time zone
and daylight saving.

Scans and saves available
channels automatically.

Store Demo

WATCHING TV

When the basic settings are complete,

4

press

ENTER

.

NOTE

If you do not complete the Initial setting,

y

it will appear whenever the TV turns on.
Disconnect the power cord from the

y

power outlet when you do not use the
TV for a long period of time.

To turn the TV off, press

5

POWER

.

35

ENGLISH

ENG

36

Watching TV

1

2

3

ENGLISH

ENG

4

WATCHING TV

In Standby mode, press

on.

Press

Control the TV using the following buttons

while you are watching TV.

CH (^, v)

LIST

0 - 9

VOL (+, -)
MUTE
AV MODE

Q.MENU

FLASHBK

RATIO

FREEZE

1 The Lock icon (ᯢ) appears in front of a

channel blocked with parental control.

2 Each

sound settings. If you select
and sound settings will be restored to the
previously customized settings.

To turn the TV off, press

The TV switches to Standby mode.

and select TV.

INPUT

Button Description

Scrolls through saved channels.
Selects a channel on the saved

1

channel list.
Selects a channel by entering

numbers.
Adjusts the volume level.
Mutes all sounds.

2

Selects an AV mode (See p.41).
Accesses the quick menus

(See p.42).
Alternates between the last two

channels selected.
Resizes an image (See p.40).
Freezes the current frame while you

are watching TV (

has the optimized image and

AV mode

POWER

POWER

to turn the TV

Plasma

).

, the image

Off

.

Managing channels

Setting up channels

Storing channels

To store channels automatically,

Press

1

Press the Navigation buttons to scroll to

2

CHANNEL

Press the Navigation buttons to scroll to

3

Tuning

Select

4

The TV scans and saves available channels
automatically.

When you are finished, press

5

When you return to the previous menu, press

BACK

To store channels manually,

Press

1

Press the Navigation buttons to scroll

2

CHANNEL

Press the Navigation buttons to scroll to

3

Manual Tuning

Scroll through the channel types, and then add

4

or delete channels.

When you are finished, press

5

When you return to the previous menu, press

BACK

If the TV scans a blocked channel, you will

y

be prompted to enter your password to keep
the channel scanned.
You can store up to 1000 channels. The

y

number of channels that you can store
differs depending on the broadcasting signal
environment.
The channels are stored in the order of

y

TV, Cable DTV

to access the main menus.

Home

and press

and press

Start

ENTER

to start automatic tuning.

ENTER

.

.

NOTE

If the TV scans and saves channels,

y

the previously saved channels will be
overwritten.

.

EXIT

.

to access the main menus.

Home

and press

and press

.

ENTER

ENTER

.

EXIT

.

.

NOTE

and

Cable TV

.

Auto

DTV

,

WATCHING TV

37

WATCHING TV

38

Editing your channel list

Press

1

Press the Navigation buttons to scroll to

2

CHANNEL

Press the Navigation buttons to scroll to

3

Channel Edit

Edit channels using the following buttons.

4

^

^, v,

ENTER

CH (^, v)

Blue button

FAV

Q.MENU

Yellow
button

When you are finished, press

5

When you return to the previous menu, press

BACK

Selecting a channel on the channel list

Press

1

- To move to the previous or next page, press

CH

- To tune to the "

Edit

Select a channel you want and press

2

to access the main menus.

Home

and press

and press

Button Description

Highlights the channel type.

Scrolls through channel types or

<

,

>

channels.
Selects the highlighted channel to

view.
Moves to the previous or next

page.
Adds or deletes a channel.

The deleted channel displays in
blue.

Registers or cancels the current
channel in favorite channel list.

Selects your desired favorite
channel group.

Blocks or unblocks a channel.

.

to access the channel list.

LIST

, v).

(

^

, press

Blue

CHANNEL

button.

ENTER

ENTER

.

.

EXIT

menu -

.

Channel

ENTER

Using favorite channels

Add the channels that you watch frequently to the
favorite list.

Setting up your favorite list

Select a channel to add to the favorite list.

1

Press

2

Press the Navigation buttons to select your

3

desired favorite channel group.

Press the

4

the current channel in favorite channel list.
Press the

Press the Navigation buttons to scroll to

5

Favorite

Press

6

the favorite list.

When you are finished, press

7

You can also setup Favorite List in the

y

CHANNEL

Selecting a channel on the favorite list

Press

1

- To move to the previous or next page, press

Select a channel you want and press

2

.

.

FAV

Yellow

button to move to

Blue

.

to add the selected channel to

ENTER

NOTE

menu -

to access the favorite list.

FAV

, v).

(

CH

^

button to register or cancel

Channel Edit

Channel Edit

.

EXIT

.

ENTER

Checking current program info

Press
The following information appears at the top of the screen.

Banner information Program title Current timeEnd time

᯦'79

ᱏ᯻

.

Multilingual

ENGLISH

ENG

.

ENGLISH

ENG

Dolby Digital

Caption

Aspect ratio

Resolution

Rating

to view the information of the currently program while you are watching.

ENTER

%ULHI,QIR7LWOH7HVW





$0 $0

&11

Icon Description

1H[W$01HZV

Start time

᯵

᯸

᯿

ᰆ

ᰇ

L
S
S
L

S

ᯢ

Progress bar

The program contains two or more audio language services. You can change the

audio language

The program contains a Dolby Digital audio signal in TV and HDMI input sources.

The program contains one or more language caption services. You can change the

caption language

The original aspect ratio of the video is 4:3.
The original aspect ratio of the video is 16:9 (wide).

The video resolution is 720 x 480i.
The video resolution is 720 x 480p.
The video resolution is 1280 x 720p.
The video resolution is 1920 x 1080i.
The video resolution is 1920 x 1080p.

The program contains Rating information.
See "LOCK Settings" on p.67.

using the quick menu.

using the quick menu.

᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69

6XQ)HE$0

NOTE

The Lock icon (ᯢ) appears in front of a

y

channel blocked with parental control.
If you select the blocked channel, you will be

y

prompted to enter your password.

WATCHING TV

᯦'79&11

%ULHI,QIR7LWOH7HVW

$0

1RLQIRUPDWLRQ
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ
ZLWKUHJXODUDQGVSHFLDOJXHVWV
6DUDK%UDGOH\6WHYH*UD\DQG%UHQGRQ3RQJLDSUHVHQWWKHODWHVWLQIDVKLRQWKHDUWVHQWHUWDLQPHQWOLIHVW\OHDQGFRRNLQJ

Button Description

INFO

< or >

^ or v

Shows current channel information.
Shows previous or next channel

information.
Changes a channel.

᯵0XOWLOLQJXDO᯸᯿&DSWLRQᰇLᯢ793*'/69

$0

ᯱ

ᯐ&K&KDQJH۽1H[Wᯙ:DWFK

ᯕ8S

ᯕ'RZQ

39

WATCHING TV

40

Using additional options

Adjusting aspect ratio

Resize an image to view at its optimal size by
pressing

You can also change the image size by

y

pressing

Ratio

The available ratio varies depending on the

y

input source.

16:9

-

while you are watching TV.

RATIO

NOTE

or accessing

Q. MENU

in the

: Resizes images to fit the screen width.

PICTURE

menu.

Aspect

: Resizes images to the previous standard

4:3

-

4:3.

: Formats an image to fit the screen

Zoom

-

width. The top and bottom of the image may
not appear.

ENGLISH

ENG

ENGLISH

ENG

Just Scan

-

size without

: Displays video images in the original

cutting off the edges.

NOTE

If you select

y

image noises at the edge

screen.

The input sources: DTV, Component,

y

HDMI-DTV, and DVI-DTV
(720p/1080i/1080p) support Just Scan.

Set By Program

-

aspect ratio

Just Scan

: Displays images in the same

as the original image.

, you may see

or edges of the

NOTE

If you access,
menus,

Press

y

vertically.
Press

y

or down.

Cinema Zoom

-

cinemascope ratio, 2.35:1.

To change the ratio of the cinema zoom,

y

press
To move the zoom focus up or down,

y

press

Aspect Ratio

or > to stretch an image

<

or v to move the zoom focus up

^

: Formats an image to the

or > and its range is from 1 to 16.

<

or v.

^

in the

NOTE

If you enlarge or reduce an image, the

y

image may be distorted.

Quick