LG 47LB6520-TB Owner’s Manual

OWNER’S MANUAL

*

LED TV

* LG LED TV applies LCD screen
with LED backlights.

Click! User Guide

Please read this manual carefully before operating
your set and retain it for future reference.

LB63**
LB65**
LB67**
LB69**

LB72**
LB75**
LB87**

*MFL68027103*

www.lg.com

P/NO : MFL68027103 (1405-REV03)

Printed in Korea

2

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

ENG

3 LICENSES

3 OPEN SOURCE SOFTWARE

NOTICE

3 EXTERNAL CONTROL DEVICE

SETUP

4 SAFETy INSTRUCTIONS

10 Viewing 3D Imaging (Only 3D models)

11 INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking
15 Separate purchase
16 Parts and buttons
18 - Using the Joystick button
19 Lifting and moving the TV
20 Setting up the TV
20 - Attaching the stand
24 - Attaching the Sound Bar Supporter
25 Mounting on a table
27 Mounting on a wall
29 Tidying cables
31 Using Built-in Camera
31 - Preparing Built-in Camera
32 - Name of Parts of Built-in Camera
32 - Checking the Camera’s Shooting

Range

33 MAKING CONNECTIONS

33 Antenna connection
34 Satellite dish connection
34 Headphone connection
35 HDMI connection
36 DVI to HDMI connection
37 Component connection
38 Composite connection
39 Audio connection
39 - Digital optical audio connection
39 USB connection
40 Euro Scart connection
41 MHL connection

42 REMOTE CONTROL

43 MAGIC REMOTE FUNCTIONS

44 Registering Magic Remote
44 How to use Magic Remote
45 Precautions to Take when Using the

Magic Remote

45 USING THE USER GUIDE

46 MAINTENANCE

46 Cleaning your TV
46 - Screen, frame, cabinet and stand
46 - Power cord

46 TROUBLESHOOTING

47 SPECIFICATIONS

WARNING

yIf you ignore the warning message, you

may be seriously injured or there is a
possibility of accident or death.

CAUTION

yIf you ignore the caution message, you

may be slightly injured or the product may
be damaged.

NOTE

yThe note helps you understand and use

the product safely. Please read the note
carefully before using the product.

LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP

3

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to [e-mail]. This offer is valid for three (3) years from the date on which you purchased
the product.

EXTERNAL CONTROL DEVICE SETUP

ENGENGLISH

To obtain the external control device setup information, please visit www.lg.com.

4

SAFETY INSTRUCTIONS

ENGLISH

SAFETY INSTRUCTIONS

ENG

Please read these safety precautions carefully before using the product.

WARNING

Do not place the TV and/or remote control

y

in the following environments:

- A location exposed to direct sunlight

- An area with high humidity such as a
bathroom

- Near any heat source such as stoves and
other devices that produce heat

- Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil

- An area exposed to rain or wind

- Near containers of water such as vases

Otherwise, this may result in fire, electric
shock, malfunction or product deformation.

Do not place the product where it might be

y

exposed to dust.
This may cause a fire hazard.

Make sure to connect Mains cable to

y

compliant AC mains socket with Grounded
earth pin. (Except for devices which are not
grounded on earth.) Otherwise possibility
you may be electrocuted or injured.

Insert power cable plug completely into wall

y

socket otherwise if not secured completely
into socket, fire ignition may break out.

Ensure the power cord does not come into

y

contact with hot objects such as a heater.
This may cause a fire or an electric shock
hazard.

Mains Plug is the TV connecting/

y

disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.

Do not touch the power plug with wet

y

hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.

Do not place a heavy object, or the product

y

itself, on power cables.
Otherwise, this may result in fire or electric
shock.

Bend antenna cable between inside and

y

outside building to prevent rain from flowing
in.
This may cause water damaged inside the
Product and could give an electric shock.

SAFETY INSTRUCTIONS

5

When mounting TV onto wall make sure to

y

neatly install and isolate cabling from rear
of TV as to not create possibility of electric
shock /fire hazard.

Do not plug too many electrical devices into

y

a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.

Do not drop the product or let it fall over

y

when connecting external devices.
Otherwise, this may result in injury or
damage to the product.

Keep the anti-moisture packing material or

y

vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children.

Desiccant

Dispose of used batteries carefully to ensure

y

that a small child does not consume them.
Please seek Doctor- Medical Attention
immediately if child consumes batteries.

Do not insert any metal objects/conductors

y

(like a metal chopstick/cutlery/screwdriver)
between power cable plug and input Wall
Socket while it is connected to the input
terminal on the wall. Additionally, do not touch
the power cable right after plugging into the
wall input terminal. You may be electrocuted.
(Depending on model)

Do not put or store inflammable substances

y

near the product. There is a danger of
combustion/explosion or fire due to careless
handling of the inflammable substances.

Do not drop metallic objects such as coins,

y

hair pins, chopsticks or wire into the product,
or inflammable objects such as paper and
matches. Children must pay particular
attention. Electrical shock, fire or injury can
occur. If a foreign object is dropped into the
product, unplug the power cord and contact
the service centre.

ENGENGLISH

Do not let your children climb or cling onto

y

the TV. Otherwise, the TV may fall over,
which may cause serious injury.

Do not spray water on the product or scrub

y

with an inflammable substance (thinner or
benzene). Fire or electric shock accident can
occur.

6

SAFETY INSTRUCTIONS

ENGLISH

ENG

objects to fall into the unit, and do not drop
anything onto the screen.
You may be injured or the product can be
damaged.

Never touch this product or antenna during a

y

thunder or lighting storm.
You may be electrocuted.

Never touch the wall outlet when there is

y

leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.

Do not disassemble, repair or modify the

y

product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.

If any of the following occur, unplug the

y

product immediately and contact your local
service centre.

- The product has been impacted by shock

- The product has been damaged

- Foreign objects have entered the product

- The product produced smoke or a strange
smell

This may result in fire or electric shock.

Do not allow any impact, shock or any

y

Unplug the TV from AC mains wall socket

y

if you do not intend to use the TV for a long
period of time. Accumulated dust can cause
fire hazard and insulation deterioration can
cause electric leakage/shock/fire.

Apparatus shall not be exposed to dripping

y

or splashing and no objects filled with
liquids, such as vases, shall be placed on
the apparatus.

Do not install this product on a wall if it could

y

be exposed to oil or oil mist.
This may damage the product and causeit to
fall.

CAUTION

Install the product where no radio wave

y

occurs.

There should be enough distance between

y

an outside antenna and power lines to keep
the former from touching the latter even
when the antenna falls.
This may cause an electric shock.

Do not install the product on places such

y

as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or
where the product cannot be fully supported.
Otherwise, the product may fall or flip over,
which may cause injury or damage to the
product.

SAFETY INSTRUCTIONS

7

If you install the TV on a stand, you need

y

to take actions to prevent the product from
overturning. Otherwise, the product may fall
over, which may cause injury.

If you intend to mount the product to a wall,

y

attach VESA standard mounting interface
(optional parts) to the back of the product.
When you install the set to use the wall
mounting bracket (optional parts), fix it
carefully so as not to drop.
Only use the attachments / accessories

y

specified by the manufacturer.

When installing the antenna, consult with a

y

qualified service technician. If not installed
by a qualified technician, this may create a
fire hazard or an electric shock hazard.

We recommend that you maintain a

y

distance of at least 2 to 7 times the diagonal
screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.

Do not place non-rechargeable batteries in

y

charging device.

Make sure there are no objects between the

y

remote control and its sensor.

Signal from Remote Control can be

y

interrupted due to external/internal lighting
eg Sunlight, fluorescent lighting.If this occurs
turn off lighting or darken viewing area.

When connecting external devices such

y

as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over, which
may cause injury or damage the product.

Do not turn the product On/Off by plugging-

y

in or unplugging the power plug to the
wall outlet. (Do not use the power plug for
switch.)
It may cause mechanical failure or could
give an electric shock.

ENGENGLISH

Only use the specified type of battery.

y

This could cause damage to the remote
control.

Do not mix new batteries with old batteries.

y

This may cause the batteries to overheat
and leak.

Batteries should not be exposed to

y

excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.

Please follow the installation instructions

y

below to prevent the product from
overheating.

- The distance between the product and the
wall should be more than 10 cm.

- Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
cupboard).

- Do not install the product on a carpet or
cushion.

- Make sure the air vent is not blocked by a
tablecloth or curtain.

Otherwise, this may result in fire.

8

SAFETY INSTRUCTIONS

y

ENGLISH

ENG

y

y

y

y

Take care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.

Periodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized servicer.

Prevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.

Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.

Do not press strongly upon the panel with
a hand or sharp object such as nail, pencil
or pen, or make a scratch on it, as it may
cause damage to screen.

When cleaning the product and its

y

components, unplug the power first and wipe
it with a soft cloth. Applying excessive force
may cause scratches or discolouration. Do
not spray with water or wipe with a wet cloth.
Never use glass cleaner, car or industrial
shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its
panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).

As long as this unit is connected to the AC

y

wall outlet, it is not disconnected from the AC
power source even if you turn off this unit by
SWITCH.
When unplugging the cable, grab the plug

y

and unplug it, by pulling at the plug. Don’t pull
at the cord to unplug the power cord from the
power board, as this could be hazardous.

When moving the product, make sure

y

you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be damaged,
which may create a fire hazard or cause
electric shock.

Avoid touching the screen or holding your

y

finger(s) against it for long periods of time.
Doing so may produce some temporary or
permanent distortion/damage to screen.

When moving or unpacking the product, work

y

in pairs because the product is heavy.
Otherwise, this may result in injury.

SAFETY INSTRUCTIONS

9

Contact the service centre once a year to

y

clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.

Refer all servicing to qualified service

y

personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.

If the product feels cold to the touch, there

y

may be a small “flicker” when it is turned
on. This is normal, there is nothing wrong
with product.

You may find different brightness and colour

y

of the panel depending on your viewing
position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is not
malfunction.

Displaying a still image (e.g., broadcasting

y

channel logo, on-screen menu, scene from
a video game) for a prolonged time may
cause damage to the screen, resulting in
retention of the image, which is known as
image sticking. The warranty does not cover
the product for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period (2
or more hours for LCD, 1 or more hours for
Plasma).
Also, if you watch the TV at a ratio of 4:3 for
a long time, image sticking may occur on
the borders of the panel.
This phenomenon also occurs in third-party
products and is not subject to exchange or
refund.

ENGENGLISH

The panel is a high technology display

y

product with resolution of two million to six
million pixels. You may see tiny black dots
and/or brightly coloured dots (red, blue or
green) at a size of 1 ppm on the panel.
This does not indicate a malfunction and
does not affect the performance and
reliability of the product.
This phenomenon also occurs in third­party products and is not subject to
exchange or refund.

Generated Sound

y

“Cracking” noise: A cracking noise that
occurs when watching or turning off the TV
is generated by plastic thermal contraction
due to tempera-ture and humidity. This
noise is common for products where
thermal deformation is required. Electrical
circuit humming/panel buzzing: A low level
noise is generated from a high-speed
switching circuit, which supplies a large
amount of current to operate a product. It
varies depend-ing on the product.
This generated sound does not affect the
performance and reliability of the product.

10

SAFETY INSTRUCTIONS

Viewing 3D Imaging

ENGLISH

ENG

(Only 3D models)

WARNING

Viewing Environment

yViewing Time

- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may
cause headache, dizziness, fatigue or
eye strain.

Those that have a photosensitive
seizure or chronic illness

ySome users may experience a seizure or

other abnormal symptoms when they are

exposed to a ashing light or particular

pattern from 3D contents.

yDo not watch 3D videos if you feel nausea,

are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.

y3D Contents are not recommended to those

who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.

yIf you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.

yIf your eyesight varies between your right

and left eye, revise your eyesight prior to
watching 3D contents.

Symptoms which require discontinuation or
refraining from watching 3D contents

yDo not watch 3D contents when you feel

fatigue from lack of sleep, overwork or
drinking.

yWhen these symptoms are experienced,

stop using/watching 3D contents and get
enough rest until the symptom subsides.

- Consult your doctor when the symptoms
persist. Symptoms may include
headache, eyeball pain, dizziness,
nausea, palpitation, blurriness,
discomfort, double image, visual
inconvenience or fatigue.

CAUTION

Viewing Environment

Viewing Distance

y

- Maintain a distance of at least twice the
screen diagonal length when watching 3D
contents. If you feel discomfort in viewing
3D contents, move further away from the
TV.

Viewing Age

yInfants/Children

- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.

- Children under the age of 10 may
overreact and become overly excited
because their vision is in development (for
example: trying to touch the screen or
trying to jump into it. Special monitoring
and extra attention is required for children
watching 3D contents.

- Children have greater binocular disparity
of 3D presentations than adults because
the distance between the eyes is shorter
than one of adults. Therefore they will
perceive more stereoscopic depth
compared to adults for the same 3D
image.

yTeenagers

- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them to
refrain from watching 3D contens for a
long time when they are tired.

yElderly

- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.

Cautions when using the 3D glasses

Make sure to use LG 3D glasses. Otherwise,

y

you may not be able to view 3D videos
properly.

Do not use 3D glasses instead of your normal

y

glasses, sunglasses or protective goggles.

Using modied 3D glasses may cause eye

y

strain or image distortion.

Do not keep your 3D glasses in extremely high

y

or low temperatures. It will cause deformation.

The 3D glasses are fragile and are easy to be

y

scratched. Always use a soft, clean piece of
cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp
objects or clean/wipe them with chemicals.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

<

<

11

NOTE

yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you

are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV

may take up to one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.

ENGENGLISH

CAUTION

yDo not use any unapproved items to ensure the safety and product life span.

yAny damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

ySome models have a thin film attached on to the screen and this must not be removed.

NOTE

yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

*A

*B

A

B

B

10 mm

=

18 mm

A

=

12

ENGLISH

ENG

ENERGY

ASSEMBLING AND PREPARING

AV MODE

INPUT

TV

SAVING

1 2 3

4 5 6

7 809

FLASHBK

LIST

MARK

FAV

P
A
G

3D

CHVOL

E

MUTE

INFO

MENU

Q.MENU

ENTER

EXIT

BACK

L/R SELECT

FREEZE

RATIO

Remote Control, Batteries
(AAA)

The remote control will not
be included for all sales
market.
(Depending on model)

Magic Remote, Batteries
(AA)

(Only LB63**, LB65**, LB67**,
LB69**, LB72**, LB75**,
LB87**)
(See p.43)

(See p.42)

Tag On

Tag on Cinema 3D Glasses

The number of 3D glasses
may differ depending on the
model or country.
(Only LB65**, LB67**, LB69**,
LB72**, LB75**, LB87**)

Owner’s Manual

Wall Mount Spacers

2EA
(Only 42LB63**, 42LB65**)
(See p.29)

Component Gender Cable

(Only LB87**)
(See p.37)

Composite Gender Cable

(Only LB87**)
(See p.37, 38)

Power Cord

(Depending on model)

ASSEMBLING AND PREPARING

13

ENGENGLISH

Cable Holder

(Depending on model)
(See p.29, 30)

Stand Screws

4EA, M4 x L20
(Only 32LB65**)
(See p.20, 21)

Cable Managements

2EA
(Only LB63**, LB65**,

LB67**, LB69**, LB72**)

(See p.29, 30)

Stand Screws

4EA, M4 x L14
(Only LB63**,

39/42/47/50/55/60/70LB65**,
LB67**, LB69**, LB72**,

LB75**)
8EA, M4 x L14
(Only LB87**)
(See p.20, 21, 22, 23, 24)

Cable Managements

2EA
(Only LB75**)
(See p.30)

Stand Screws

4EA, M4 x L10
(Only LB75**)
(See p.21)

Stand Bases

(Only LB65**-TH)
(See p.21)

Stand Bases

(Only LB63**,
32/39/42/47/50/55/60LB65**

-TA/TB)

(See p.20)

Stand Assys
(Stand Body/Stand Base)

(Only 70LB65**-TA, LB67**,

LB69**, LB72**)

(See p.20)

14

ENGLISH

ENG

ASSEMBLING AND PREPARING

Stand Front

(Only LB75**)
(See p.21)

Stand Assys

(Only LB87**)
(See p.22)

Stand Supporters

(Only LB75**)
(See p.21)

Sound Bar Supporters

(Only LB87**)
(See p.24)

Sound Bar

(Only LB87**)
(See p.22, 24)

Screw Covers

(Only LB87**)
(See p.23, 24)

ASSEMBLING AND PREPARING

15

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.

AG-F***DP

Dual Play Glasses

Tag on AN-VC5**

Compatibility

AG-F***DP

Dual Play Glasses

AG-F***

Cinema 3D Glasses

AN-MR500

Magic Remote

Tag on

AN-VC5**

Video Call Camera

LG Audio Device

AG-F***

Cinema 3D Glasses

Video Call Camera

LB65**, LB67**,

LB63**

• • •

• • •

• •

• • •

LB69**, LB72**,
LB75**

AN-MR500

Magic Remote

LG Audio Device

• •

• •

LB87**

ENGENGLISH

The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.

16

ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

ENG

A type : LB63**, LB65**-TA/TB

Screen

B type : LB65**-TH

Screen

Speakers

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

2

C type : LB67**, LB69**, LB72**

Remote control and

Intelligent1 sensors

Screen

Speakers

Power Indicator

Speakers

Joystick Button

2

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

2

D type : LB75**

Screen

Speakers

ASSEMBLING AND PREPARING

E type : LB87**

Screen

Speakers

17

ENGENGLISH

Built-in Camera

Remote control and

Intelligent1 sensors

Power Indicator

Joystick Button

2

Remote control and

Intelligent1 sensors

Joystick Button

2

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.

NOTE

yYou can set the LG Logo light or Power indicator Light to on or off by selecting General in the

main menus. (Depending on model)

LG Logo light