LG Electronics 32LG6000-ZA, 32PG6000-ZA, 37LG6000-ZA, 42LG6000-ZG, 42LG6100-ZH User Manual

...
OWNER’S MANUAL
LCD TV MODELS
3322LLGG6600
****
3377LLGG6600
****
4422LLGG6600
****
4422LLGG6611
****
4477LLGG6600
****
PLASMA TV MODELS
3322 PPGG 6600
****
4422 PPGG 6600
****
5500 PPGG 6600
****
5500 PPGG 7700
****
6600 PPGG 7700** ** 5500PPGG4400****
LCD TV
PLASMA TV
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
ENGLISH
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
IIDD NN uummbbeerr((ss ))::
5102: 32LG6000-ZA 5103: 37LG6000-ZA 5104: 42LG6000-ZA 5484: 42LG6100-ZB 5105: 47LG6000-ZA 5571: 42LG6000-ZG 5572: 47LG6000-ZG 5719: 42LG6100-ZH
5251: 32PG6000-ZA 5252: 32PG6010-ZE 5100: 42PG6000-ZA 5249: 42PG6010-ZE 5101: 50PG6000-ZA 5250: 50PG6010-ZE 5245: 50PG7000-ZB 5244: 60PG7000-ZB 5246: 50PG4000-ZA
Downloaded From TV-Manual.com Manuals
Downloaded From TV-Manual.com Manuals
1

ACCESSORIES

ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
Image shown may differ from your TV
Owner’s Manual Batteries
Remote Control
Power Cord
Polishing Cloth
Polishing cloth for use on
the screen.
This feature is not available for all models.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching or discolouration.
LLCCDD TTVV mmooddeellss
Cable management clip
bolts for stand assembly
(Refer to p. 8)
Protection cover
(Refer to p.13)
32 LG 60
**
: 3EA
37L G60
**
: 4EA
2EA
4EA
1EA
4EA
(32/37LG60
**
only)
(42LG60
**,
42LG61
**
only)
Cable management clip
Protection cover
(Refer to p.13)
Ferrite core
(Refer to p.11)
(This feature is not available for
all models.)
PPLLAASSMMAA TTVV mmooddeellss
(50PG60
** ,
50/60PG70
**
only)
(50PG40
**
only)
(Except 50PG40
**
)
Cable Holder
(32/42PG60**:1EA,
50PG40
**
:2EA)
*This feature is not available for all models.
bolts for stand assembly
(Refer to p. 8)
4EA
(32PG60
**
only)
Downloaded From TV-Manual.com Manuals

CONTENTS

2
CONTENTS
ACCESSORIES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
PREPARATION
Front Panel Controls..................................................... 4
Back Panel Information ................................................ 6
Stand Installation........................................................... 8
Please set it up carefully so the product doesn’t fall
over..................................................................................... 9
Back Cover for Wire Arrangement.......................... 10
Swivel Stand ................................................................. 11
Desktop Pedestal Installation................................... 12
Wall Mount: Horizontal Installation........................ 13
Antenna Connection................................................... 14
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup...................................................... 15
DVD Setup..................................................................... 17
VCR Setup..................................................................... 20
Insertion of CI Module .............................................. 22
Digital Audio Out Setup............................................ 23
Other A/V Source Setup........................................... 24
Usb in Setup................................................................. 25
PC Setup........................................................................ 26
- Screen Setup for PC Mode .............................. 29
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ............................... 34
Turning on the TV....................................................... 36
Programme Selection ................................................ 36
Volume Adjustment ................................................... 36
Quick Menu ................................................................. 37
On-Screen Menus Selection and Adjustment..... 38
Auto Programme Tuning ............................................ 39
Manual Programme Tuning (In Digital Mode)..... 40
Manual Programme Tuning (In Analogue Mode) ... 41
Programme Edit ........................................................... 43
Booster........................................................................... 46
Software Update.......................................................... 47
Diagnostics ................................................................... 48
CI Information.............................................................. 49
Selecting the Programme Table............................... 50
Input List........................................................................ 51
................................................................. 52
Input Label .................................................................... 54
AV Mode........................................................................ 55
TO USE THE USB DEVICE
When connecting the USB device.......................... 56
Photo List ...................................................................... 57
Music List........................................................................61
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
- Switch on/off EPG ............................................... 64
- Select Programme ................................................ 64
- Button Function in NOW/NEXT Guide Mode 65
- Button Function in 8 Day Guide Mode.......... 65
- Button Function in Date Change Mode ......... 65
-
Button Function in Extended Description Box .
66
-
Button Function in Record/Remind Setting Mode
.66
- Button Function in Schedule List Mode......... 66
PICTURE CONTROL
Picture Size (Aspect Ratio) Control....................... 67
Preset Picture Settings
- Picture Mode-Preset............................................ 69
- Auto Colour Tone Control
(Warm/Medium/Cool) ........................................ 70
Manual Picture Adjustment
- Picture Mode-User option................................. 71
-Picture Mode-Expert Control............................. 72
Picture Improvement Technology ........................... 73
Advanced - Film Mode/ Real Cinema .................... 74
Advanced - Black(Darkness) Level ......................... 75
Advanced - Trumotion.................................................76
TruMotion Demo ..........................................................77
Eye Care..........................................................................78
Picture Reset................................................................. 79
Downloaded From TV-Manual.com Manuals
CONTENTS
3
Power Indicator .............................................................80
Image Sticking Minimization (ISM) Method ........ 81
Power Saving Picture Mode...................................... 82
SOUND & LANGUAGE CONTROL
Auto Volume Leveler................................................... 83
Preset Sound Settings - Sound Mode................... 84
Sound Setting Adjustment -User Mode ............... 85
SRS TruSurround XT .................................................. 85
Clear Voice.................................................................... 86
Balance........................................................................... 87
TV Speakers On/ Off Setup..................................... 88
Selecting Digital Audio Out ..................................... 89
Audio Reset .................................................................. 90
I/II
- Stereo/Dual Reception (In Analogue Mode
Only)........................................................................... 91
- NICAM Reception (In Analogue Mode Only)... 92
- Speaker Sound Output Selection.................... 92
On-Screen Menu Language/Country Selection .. 93
Language Selection (In Digital Mode only)......... 94
TIME SETTING
Clock Setup .................................................................. 95
Auto On/ Off Timer Setting..................................... 96
Auto Shut-off Setting ................................................. 97
Time Zone Setup ........................................................ 98
Sleep Timer Setting .................................................... 98
PARENTAL CONTROL / RATINGS
Set Password & Lock System................................... 99
Block Programme...................................................... 100
Parental Control......................................................... 101
Key Lock ...................................................................... 102
TELETEXT
Switch on/off ............................................................. 103
SIMPLE Text ................................................................ 103
TOP Text...................................................................... 103
FASTEXT...................................................................... 104
Special Teletext Functions...................................... 104
DIGITAL TELETEXT
Teletext within Digital Service................................ 105
Teletext in Digital Service........................................ 105
APPENDIX
Troubleshooting ........................................................ 106
Maintenance .............................................................. 108
Product Specifications............................................. 109
Programming the Remote Control......................... 111
IR Codes....................................................................... 113
External Control Device Setup............................... 115
Downloaded From TV-Manual.com Manuals

PREPARATION

4
PREPARATION

FRONT PANEL CONTROLS

Image shown may differ from your TV
If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Plasma TV Models
Remote Control Sensor
POWER
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates green when the TV is switched on.
PROGRAMMEVOLUMEMENU OKINPUT
P
OKOK
MENUMENU
INPUTINPUT
Downloaded From TV-Manual.com Manuals
P
5
PREPARATION
LCD TV Models
P
OK
MENU
INPUT
P
PROGRAMME
VOLUME
OK
MENU
INPUT
Intelligent Sensor
Adjusts picture according to the sur­rounding conditions
POWER
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates White when the TV is switched on. Note: You can adjust
PP ooww ee rr IInndd ii cc aa ttoorr
in the
OPTION menu.
Downloaded From TV-Manual.com Manuals
PREPARATION
6
PREPARATION

BACK PANEL INFORMATION

A
Image shown may differ from your TV.
Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
Component Input
Connect a component video/audio device to these jacks.
RGB Input
Connect the output from a PC.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
Antenna Input
Connect RF antenna to this jack.
PCMCIA (Personal Computer Memory Card
International Association) Card Slot
(This feature is not available in all countries.)
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
USB Input
SERVICE ONLY PORT
1
2
3
4
7
8
9
10
11
12
13
1
5
6
2
3 4 5
6
7 8
9
Plasma TV Models
50PG40
**
Only
50PG40
**
Only
10
12 13
2
11
2
Downloaded From TV-Manual.com Manuals
7
PREPARATION
LCD TV Models
Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC.
RGB Input
Connect the output from a PC.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
Component Input
Connect a component video/audio device to these jacks.
Audio/Video Input
Connect audio/video output from an external device to these jacks.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks
Antenna Input
Connect RF antenna to this jack.
1
2
3
4
6
7
8
9
1
5
432
HDMI Input
Connect a HDMI signal to HDMI IN.
USB Input
PCMCIA (Personal Computer Memory Card International Association) Card Slot
(This feature is not avail­able in all countries.)
5
7
8 9
6
Downloaded From TV-Manual.com Manuals
PREPARATION
8
PREPARATION
STAND INSTALLATION
1
3
4
Carefully place the TV screen side down on a cush­ioned surface to protect the screen from damage.
2
Assemble the parts of the
SS ttaanndd BB oo dd yy
with
CC oo vveerr BBaass ee
of the TV.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the back of the TV.
1
2
3
Carefully place the TV screen side down on a cush­ioned surface to protect the screen from damage.
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the back of the TV.
Stand Body
Cover Base
32LG60
**
37LG60
**
Stand Body
Cover Base
42LG60**, 42LG61
**
32/37/42LG60**, 42LG61
**
Only
32PG60
**
Only
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
Downloaded From TV-Manual.com Manuals
PREPARATION
9

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN’T FALL OVER.

2
1
A
You should purchase necessary components to fix the TV to the wall on the market.
A
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
NOTE
!
G
When moving the TV undo the cords first.
G
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
G
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
2
3
1
1
2
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
3
Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
Downloaded From TV-Manual.com Manuals
PREPARATION
10
PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall eeqquuii ppmmee nntt SS eettuupp
section.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
2
NOTE
!
GG
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
Image shown may differ from your TV.
CABLE MANAGEMENT CLIP
Plasma TV models
50PG60
**,
50/60PG70
**
* Fix the
CCaabb llee HHoollddeerr
as shown and bundle the cables.
Hold the
CC AABBLLEE MMAANNAAGG EEMMEENNTT CCLLIIPP
with both hands and pull it upward.
For the 42PG60** model, press the center of the
CC AABBLLEE MMAANNAAGG EEMMEENNTT CCLLIIPP
and then lift it .
How to remove the cable management clip
50PG60**, 50/60PG70**
32PG60
**
50PG40
**
42PG60
**
Separate CABLE MANAGEMENT from TV by pressing two latches.
32/42PG60
**
CABLE MANAGEMENT CLIP
50PG40
**
Downloaded From TV-Manual.com Manuals
11
PREPARATION

SWIVEL STAND

After installing the TV, you can adjust the TV set man­ually to the left or right direction by 20 degrees to suit your viewing position.
Install the power plug closely.
Use of ferrite core
(This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
LCD TV models
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall eeqquuii ppmmee nntt SS eettuupp
section.
1
2
Align the hole with the tab on the
CC AABBLLEE MMAANNAAGG EEMMEENNTT CC LLII PP
.
Turn the
CC AABBLLEE MMAANNAAGG EEMMEENNTT CC LLII PP
as shown.
Note that excessive force might cause damage to the product when using Cable Management clip.
Downloaded From TV-Manual.com Manuals
4 inches
4 inches 4 inches
4 inches
12
PREPARATION
PREPARATION

DESKTOP PEDESTAL INSTALLATION

A
The TV can be installed in various ways such as on a wall, or on a desktop etc.
A
The TV is designed to be mounted horizontally.
Power Supply
Circuit breaker
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
Downloaded From TV-Manual.com Manuals
13
PREPARATION

WALL MOUNT: HORIZONTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mount-ing bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover for desk-type stand installation.
NOT USING THE DESK-TYPE STAND
Plasma TV models
LCD TV models
After removing the protection paper from the protec­tion cover, adhere it to the TV as shown.
Downloaded From TV-Manual.com Manuals
PREPARATION
ANTENNA
ANTENNA
14
PREPARATION

ANTENNA CONNECTION

USB IN
AV IN 2
L/MONO
R
AUDIO
VIDEO
S-VIDEO
For optimum picture quality, adjust antenna direction.
An antenna cable and converter are not supplied.
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
Multi-family Dwellings/Apartments (Connect to wall antenna socket)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Outdoor Antenna (VHF, UHF)
Wall Antenna Socket
RF Coaxial Wire (75 ohm)
Antenna
UHF
Signal Amplifier
VHF
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
ANTENNA IN
ANTENNA IN
Downloaded From TV-Manual.com Manuals
15

EXTERNAL EQUIPMENT SETUP

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42PG60**models.
Image shown may differ from your TV.
Connecting with a component cable
1
2
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component
Yes
Yes
Yes
Yes
(50/60Hz only)
HDMI
No
Yes
Yes
Yes
(24Hz/30Hz/50Hz/60Hz)
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connect the video outputs (Y, PB, PR
)
of the digital set
top box to the
CC OOMMPPOO NNEENN TT IINN VV II DDEE OO
jacks on the
TV.
Connect the audio output of the digital set-top box to the
CC OOMMPPOO NNEENN TT IINN AA UUDDIIOO
jacks on the TV.
Turn on the digital set-top box. (
Refer to the owner’s manual for the digital set-top box.
)
Select
CC oo mm pp oonn eenntt
input source using the
II NNPP UUTT
button on the remote control.
2
3
4
1
Downloaded From TV-Manual.com Manuals
16
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with an HDMI cable
1
Connecting with an HDMI to DVI cable
1
2
Connect the digital set-top box to
HHDD MMII // DDVV II II NN 11
,
HHDDMMII IINN 22,HHDDMMII IINN 33
or
HHDDMMII IINN 44
(Except
50PG40**) jack on the TV.
Turn on the digital set-top box. (
Refer to the owner’s manual for the digital set-top box.
)
Select
HH DD MMII 11, HH DD MMII 22, HH DD MMII33
or
HH DD MMII 44
(Except
50PG40**) input source using the
II NNPP UUTT
button on
the remote control.
2
3
1
Connect the digital set-top box to
HHDD MMII // DDVV II IINN 11
jack on the TV.
Connect the audio output of the digital set-top box to the
AAUUDDIIOO IINN ((RR GGBB // DDVVII))
jack on the TV.
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
)
Select
HH DD MMII 11
input source using the
II NNPPUUTT
button
on the remote control.
2
3
4
1
Downloaded From TV-Manual.com Manuals
17
EXTERNAL EQUIPMENT SETUP

DVD SETUP

Connecting with a component cable
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
YPB PR
Video output ports
on DVD player
Y
Y
Y
Y
P
B
B-Y
Cb
Pb
P
R
R-Y
Cr
Pr
1
2
Connect the video outputs (Y, PB
, PR
)
of the DVD to the
CC OOMMPPOO NNEENN TT IINN VVII DDEEOO
jacks on the TV.
Connect the audio outputs of the DVD to the CC OOMMPPOO NNEENN TT IINN AA UUDDIIOO
jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
CC oo mm ppoonneenn tt
input source using the
II NNPPUUTT
button on the remote control.
Refer to the DVD player's manual for operating instruc­tions.
2
3
4
5
1
Downloaded From TV-Manual.com Manuals
18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
1
Connecting with a S-Video cable
(Plasma TV Only)
L R
S-VIDEOVIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
Connect the S-VIDEO output of the DVD to the
SS --
VVIIDD EEOO
input on the TV.
Connect the audio outputs of the DVD to the
AAUU DDIIOO
input jacks on the TV.
Turn on the DVD player, insert a DVD.
Select
AA VV33
input source using the
II NNPPUUTT
button on
the remote control.
Refer to the DVD player's manual for operating instruc­tions.
2
3
4
5
1
2
3
4
1
1
2
Connecting with a Euro Scart cable
Connect the Euro scart socket of the DVD to the
AAVV 11
Euro scart socket on the TV.
Turn on the DVD player, insert a DVD.
Select
AA VV11
input source using the
II NNPPUUTT
button on
the remote control. If connected to
AA VV22
Euro scart socket, select
AA VV22
input source.
Refer to the DVD player's manual for operating instructions.
NOTE
!
GG
Any Euro scart cable used must be signal shielded.
AUDIO/ VIDEO
(R) AUDIO (L)
Downloaded From TV-Manual.com Manuals
19
EXTERNAL EQUIPMENT SETUP
Connecting the HDMI cable
Connect the HDMI output of the DVD to the HHDD MMII // DDVV II IINN 11,HHDDMMII IINN 22,HHDDMMII IINN 33
or
HHDDMM II
II NN 44
(Except 50PG40**) jack on the TV.
Select
HH DD MMII 11, HH DD MMII 22, HH DD MMII33
or
HH DD MMII 44
(Except
50PG40**) input source using the
II NNPP UUTT
button on
the remote control.
Refer to the DVD player's manual for operating instructions.
2
3
1
1
GG
The TV can receive video and audio signals simultaneously when using a HDMI cable.
GG
If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
NOTE
!
Downloaded From TV-Manual.com Manuals

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
OUTPUT SWITCH
ANT IN
R
S-VIDEO VIDEO
ANT OUT
L
Wall Jack
Antenna
1
2
Connecting with a RF Cable
20
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connect the
AANNTT OOUU TT
socket of the VCR to the
AANNTT EENNNN AA IINN
socket on the TV.
Connect the antenna cable to the
AANNTT IINN
socket of the VCR.
Press the
PP LLAA YY
button on the VCR and match the appropriate channel between the TV and VCR for
viewing.
2
3
1
Downloaded From TV-Manual.com Manuals
21
EXTERNAL EQUIPMENT SETUP
(R) AUDIO (L)
AUDIO/ VIDEO
Connecting with a Euro Scart cable
1
Connect the Euro scart socket of the VCR to the
AAVV 11
Euro scart socket on the TV.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select
AA VV11
input source using the
II NNPPUUTT
button on
the remote control.
If connected to
AAVV 22
Euro scart socket, select
AA VV22
input source.
2
3
4
1
Connecting with a RCA cable
L
R
S-VIDEO
VIDEO
OUTPUT SWITCH
ANT IN
ANT OUT
Connect the
AAUU DD II OO/VVIIDD EEOO
jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
)
Select
AA VV33
input source using the
II NNPP UUTT
button on
the remote control.
1
2
3
GG
If you have a mono VCR, connect the audio cable from the VCR to the
AAUU DDIIOO LL//MMOONNOO
jack of the TV.
NOTE
!
1
NOTE
!
GG
Any Euro Scart cable used must be signal shielded.
Downloaded From TV-Manual.com Manuals
22
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
GG
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.
NOTE
!
L
R
S-VIDEO
VIDEO
OUTPUT SWITCH
ANT IN
ANT OUT
Connecting with a S-Video cable
(Plasma TV Only)
Connect the S-VIDEO output of the VCR to the
SS --
VVIIDD EEOO
input on the TV set. The picture quality is improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the
AAUU DDIIOO
input jacks on the TV.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Select
AA VV33
input source with using the
IINNPPUUTT
button on
the remote control.
2
3
4
1
1
2
Insert the CI Module to
PP CC MMCC II AA
(Personal Computer
Memory Card International Association)
CC AARR DD SSLL OOTT
of TV as shown.
For further information, see p.49.
1

INSERTION OF CI MODULE

TVTVTV
-- TT oo vviieeww tthhee eennccrryypptteedd ((ppaa yy)) sseerrvviiccee ss iinn ddiiggii tt aa ll TTVV mm oo dd ee ..
-- TT hhiiss ff eeaattuu rree ii ss nnoo tt aavvaaiill aabbllee iinn aa llll ccoouunnttrriiee ss..
1
Downloaded From TV-Manual.com Manuals
G
Do not look into the optical output port. Looking at the laser beam may damage your vision.
CAUTION
Connect one end of an optical cable to the TV Digital Audio (Optical)Output port.
Connect the other end of the optical cable to the digi­tal audio (Optical)input on the audio equipment.
Set the “TV Speaker option - Off ” in the AUDIO menu.(
G
pp..8888
). Refer to the external audio equipment
instruction manual for operation.
2
3
1
1
2
23
EXTERNAL EQUIPMENT SETUP

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Downloaded From TV-Manual.com Manuals
24
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

Connect the
AAUU DDIIOO/VVIIDD EEOO
jacks between TV and external equipment. Match the jack colours
.
(
Video = yellow, Audio Left = white, and Audio Right = red
)
Select
AA VV33
input source with using the
II NNPPUUTT
button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.
L R
VIDEO
Camcorder
Video Game Set
1
1
2
3
Downloaded From TV-Manual.com Manuals
25
EXTERNAL EQUIPMENT SETUP

USB IN SETUP

(Except 50PG40**)
Connect the USB device to the
UUSSBB IINN
jacks on the side of TV.
After connecting the
UUSSBB IINN
jacks, you use the
UU SS BB
function. (
GG
pp..5566
)
2
1
1
Downloaded From TV-Manual.com Manuals

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
AUDIO
RGB OUTPUT
1
2
4
Connect the RGB output of the PC to the
RRGG BB IINN
(( PPCC))
jack on the TV.
Connect the PC audio output to the
AAUU DDIIOO IINN
(( RRGG BB//DD VVII))
jack on the TV.
Turn on the PC and the TV
Select
RRGGBB
input source using the INPUT button on
the remote control.
2
3
1
DVI-PC OUTPUT
AUDIO
Connecting with a HDMI to DVI cable
1 2
26
EXTERNAL EQIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
4
Connect the DVI output of the PC to the
HHDDMMII//DD VVII
II NN11
jack on the TV.
Connect the PC audio output to the
AAUU DDIIOO IINN
(( RRGG BB//DD VVII))
jack on the TV.
Turn on the PC and the TV.
Select
HH DD MMII 11
input source using the INPUT button
on the remote control.
2
3
1
Downloaded From TV-Manual.com Manuals
27
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
RGB-PC, HDMI/DVI-PC mode
70.08
59.94
60.31
60.00
59.87
59.8
59.937
60.02
59.979
31.468
31.469
37. 879
48.363
47. 78
47. 72
66.587
63.98
65.317
720x 400
640x480
800x600
10 2 4 x 7 6 8
12 8 0 x 7 6 8
13 6 0 x 7 6 8
1920 x1080
12 8 0 x 10 2 4
1400x1050
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI/DVI-DTV mode
59.94
60
59.94
60
50.00
50.00
59.94
60
50.00
59.94
60
24 .0 0
30
50.00
59.94
60
31.649
31.469
31.47
31.50
31.25
37. 50
44.96
45.00
28.125
33.72
33.75
27.00
33.75
56.25
67. 433
67. 50
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x480
720x 480
720x576
12 8 0 x 7 2 0
1920 x1080
50/60PG70
**,
50PG40**only
Plasma TV Models
RGB-PC, HDMI/DVI-PC mode
70.08
59.94
60.31
60.00
59.87
59.8
59.988
60.02
59.979
31.468
31.469
37. 879
48.363
47. 78
47. 72
66.647
63.981
65.317
720x 400
640x480
800x600
10 2 4 x 7 6 8
12 8 0 x 7 6 8
13 6 0 x 7 6 8
1920 x1080
12 8 0 x 10 2 4
1400x1050
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI/DVI-DTV mode
59.94
60
59.94
60
50.00
50.00
50.94
60
50.00
59.94
60
24 .0 0
30
50.00
59.94
60
31.469
31.469
31.47
31.50
31.25
31.50
44.96
45.00
28.125
33.72
33.75
27.00
33.75
56.25
67. 433
67. 50
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x480
720x 480
720x576
12 8 0 x 7 2 0
1920 x1080
LCD TV Models
Except 32LG60
**
Downloaded From TV-Manual.com Manuals
28
EXTERNAL EQIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
NOTE
!
G
To enjoy vivid picture and sound, connect a PC to
the TV.
G
Avoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
G
Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolu­tion.
G
There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolu­tion or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
G
The synchronization input waveform for Horizontal and Vertical frequencies are separate.
G
Connect the signal cable from the monitor out­put port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.
G
Connect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).
G
If using a sound card, adjust PC sound as required.
G
This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV.
G
DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.
G
If required, adjust the settings for Plug and Play functionality
G
If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.
G
If graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)
G
DOS mode may not work depending on the video card if you use a HDMI to DVI cable.
G
If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.
G
If connected HDMI(1080p, over 12bit) to HDMI jack on the side, screen may abnormal.
Downloaded From TV-Manual.com Manuals
Loading...
+ 110 hidden pages