LG 37LC7DUK, 42LC7DUK, 32LC7DUK, 37LC7D User Manual

Please read this manual carefully before operating
your set.

Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.

LCD TV PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

32LC7D
37LC7D
42LC7D

PLASMA TV MODELS

42PC5D
50PC5D
60PC1D

www.lgusa.com / www.lg.ca

As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.

ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).

LG's own special digital image generator, consisting
of a full digital image processor, six different main
picture quality factors.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

With HDMI CEC support of LG’s audio/video device
connected to the HDMI (high-definition multimedia
interface), LG TV with this logo works easily with one
remote control.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

It has 2 HDMI ports that connect audio and video
devices with one cable and produces the highest
quality digital images and sound.

1

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the litera­ture accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

2

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate
booklet or sheet, or be located before any operating instructions in an instruction for installation for use and
supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety
information may be included by adding statements after the end of the following safety instruction list. At the
manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be
placed immediately adjacent to that safety instruction:

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

Only use attachments/accessories specified by
the manufacturer.

Unplug this apparatus when unused for long
periods of time.

1

2

3

4

5

6

7

8

3

Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.

Never touch this apparatus or antenna during
a thunder or lighting storm.

Do not allow a impact shock or any objects to
fall into the product, and do not drop onto the
screen with something.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has exposed to rain or moisture,
does not operate normally, or has been
dropped.

CAUTION concerning the Power Cord :
Most appliances recommend they be placed
upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and
has no additional outlets or branch circuits.
Check the specification page of this owner's
manual to be certain.

Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any of
these conditions could result in electric shock
or fire. Periodically examine the cord of your
appliance, and if its appearance indicates dam­age or deterioration, unplug it, discontinue use

of the appliance, and have the cord replaced
with an exact replacement part by an authorized
servicer. Protect the power cord from physical
or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.

Outdoor use marking :
WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain
or moisture.

Wet Location Marking : Apparatus shall not be
exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall
be placed on or over apparatus.

GGRROOUU NNDD IINNGG

Ensure that you connect the earth ground wire
to prevent possible electric shock. If grounding
methods are not possible, have a qualified
electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas pipes.

DDIISSCC OONNNNEECC TTII NN GG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The
plug must remain readily operable.

Owner Ma

nual

9

12

10

11

13

14

15

16

17

Power
Supply

Short-circuit

Breaker

4

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Back Cover for Wire Arrangement

. . . . . . . . . . . . . . . . . . . . .

14

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . .

17

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Audio Output

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Digital Audio Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

WATCHING TV / CHANNEL CONTROL

Remote Control Key Functions

. . . . . . . . . . . . . . . . . . . . . . . . . 32

Turning On TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . .

36

- Add / Delete Channel (Manual Tuning) . . . . . . 37

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

SimpLink

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Input Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

42

Key Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 44

Preset Picture Settings

- Picture Mode - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Color Tone - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

46

Manual Picture Adjustment

- Picture Mode - User Mode

. . . . . . . . . . . . . . . . . . . . . . . . 47

- Color Tone - User Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . .

48

XD - Picture Improvement Technology

. . . . . . . . . . . . .

49

Advanced - Cinema 3:2 Pulldown Mode

. . . . . . . . . . . 50

Advanced - Black (Darkness) Level

. . . . . . . . . . . . . . . . . . . 51

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Image Sticking Minimization (ISM) Method

. . . . . . . 53

Low - Power Picture Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SOUND & LANGUAGE CONTROL

Auto Volume Leveller (Auto Volume)

. . . . . . . . . . . . . . . . .

55

Preset Sound Setting (Sound Mode)

. . . . . . . . . . . . . . . . 56

Sound Setting Adjustment - User Mode

. . . . . . . . . . . 57

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . 60

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

On-Screen Menus Language Selection

. . . . . . . . . . . . . .

62

Caption Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

63

- Analog Broadcasting System Captions

. . . . . . . 64

- Digital Broadcasting System Captions

. . . . . . . .

65

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

66

5

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

68

Auto On/Off Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70

Auto Shut-off Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . .

72

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

74

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Programming the Remote Control

. . . . . . . . . . . . . . . . . . .

83
IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

87
External Control Through RS-232C

. . . . . . . . . . . . . . . . . .

89

6

FEATURE OF THIS TV

What is a Plasma TV?

Using plasma is the best way to achieve flat panel
displays with excellent image quality and large screen
sizes that are easily viewable. The Plasma TV can be
thought of as a descendant of the neon lamp and or
a series of fluorescent lamps.

How does it work?

Plasma TV is an array of cells, known as pixels, which
are comprised of three sub-pixels, corresponding to
the colors red, green, and blue. Gas in a plasma state
is used to react with phosphors in each sub-pixel to
produce colored light (red, green, or blue). These
phosphors are the same types used in Cathode Ray
Tube (CRT) devices such as televisions and common
computer monitors.

Plasma TV offers a rich, dynamic display because each
sub-pixel is individually controlled by advanced
electronics to produce over 16 million different
colors. This means that you get perfect images that
are easily viewable in a display that is fewer than five
inches thick.

160° - Wide angle range of vision

Your flat panel plasma screen offers an exceptionally
broad viewing angle of over 160 degrees. This means
that the display is clear and visible to viewers anywhere
in the room.

Wide Screen

The wide screen offers a theater-like experience in
your own home.

Multimedia

Connect your plasma display to a PC and use it for
conferencing, games, and Internet browsing. The
Picture-in-Picture feature allows you to view your PC
and video images simultaneously.

Versatile

The light weight and thin size makes it easy to install
your plasma display in a variety of locations where
conventional TVs do not fit.

The Plasma TV Manufacturing Process: a few
minute colored dots may be present on the
Plasma TV screen

The Plasma TV is composed of 0.9 to 2.2 million

cells. A few cell defects will normally occur in the
Plasma TV manufacturing process. Several tiny, minute
colored dots visible on the screen should be acceptable.
This also occurs in other Plasma TV manufacturers'
products. The tiny dots appearing does not mean
that this Plasma TV is defective. Thus a few cell
defects are not sufficient cause for the Plasma TV to
be exchanged or returned. Our production technology
minimizes these cell defects during the manufacture
and operation of this product.

Cooling Fan Noise-

This feature is not available for all models.

In the same way that a fan is used in a PC computer
to keep the CPU (Central Processing Unit) cool, the
Plasma TV is equipped with cooling fans to cool the
Monitor and improve its reliability. Therefore, a certain
level of noise could occur while the fans are operating
and cooling the Plasma TV.

The fan noise doesn't have any negative effect on the
Plasma TV's efficiency or reliability. The noise from
these fans is normal during the operation of this
product. We hope you understand that a certain level
of noise from the cooling fans is acceptable and is not
sufficient cause for the Plasma TV to be exchanged or
returned.

FOR LCD TV

If the TV feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is
nothing wrong with TV.

Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the monitor's
performance.

Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary distortion effects on the
screen.

OOnn DDiissppoossaall

a. The fluorescent lamp used in this product contains

a small amount of mercury.

b. Do not dispose of this product with general

household waste.

c. Disposal of this product must be carried out in

accordance to the regulations of your local authority.

PREPARATION

7

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your product. If an accessory is missing, please contact
the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard
compliance for the product.

The accssories can be different from the figures shown here.

75ohm Round Cable

OOppttiioonn EExxttrraass

D-sub 15 pin Cable

FFoorr LLCCDD TTVV mmooddeellss

Cable

Management

Twist Holder

Arrange the wires with

the twist holder.

4-Bolts for stand assembly

(Refer to p.12)

3322// 3377 iinncchheess oo nnllyy

* Slightly wipe stained spot on the exterior only with the polishing

cloth for the product exterior if there is stain or fingerprint on
surface of the exterior.

* Do not wipe roughly when removing stain. Please be cautions of

that excessive pressure may cause scratch or discoloration.

Polishing Cloth

Owner's Manual

1.5V 1.5V

Owner’s Manual CD Manual

123

456

78

0

9

B
A

C

K

V
O

L

C
H

M

U
T

E

FAV

B

R
I
G

H
T

-

MENU

BRIGHT +

E

N
T

E
R

E

X
I
T

TIME

R

R
A

T

I
O

S
I
M

P

L
I
N

K

P

O
W

E
R

V

C
R

T
V

DVD

A

U
D

I
O

C

A
B

L
E

S
T
B

MODE

T

V
I
N

P
U

T

INPUT

C
H

ENU

BRIGHT +

E
N

T
E

R

R
A
T

I
O

S
I
M

P
L

I
N

K

1

4

7

Remote Control,

Batteries

Power Cord

LCD TV PLASMA TV

Owner's Manual

http://www.lgusa.com

www.lg.ca

Copyright© 2007 LGE,
All Rights Reserved.

PREPARATION

8

FRONT PANEL INFORMATION

PREPARATION

■

Here shown may be somewhat different from your TV.

■

NOTE: If your product has a protection tape attached, remove the tape.
And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

Plasma TV Model

42/50PC5D

60PC1D

POWER
Button

INPUT
Button

MENU
Button

ENTER
Button

VOLUME
(

FF,GG

)Buttons

CHANNEL
(

EE,DD

)Buttons

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates green when the set is switched on.

Remote Control Sensor

1

ENTER

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates green when the set is switched on.

Remote Control Sensor

1

1

INPUT

MENU

ENTER

VOL

CH

PREPARATION

9

LCD TV Model

CHCH

VOLOL

ENTERENTER

MENUMENU

INPUTINPUT

CH

VOL

ENTER

MENU

INPUT

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates green when the set is

switched on.

Remote Control Sensor

CHANNEL (DD,EE)Buttons

VOLUME (FF,GG)Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

PREPARATION

10

BACK PANEL INFORMATION

PREPARATION

Plasma TV Model

■

Here shown may be somewhat different from your TV.

/

MONO

60PC1D

42/50PC5D

LCD TV Model

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

R

RGB IN

HDMI/DVI IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

MONO

( )

AUDIO

S-VIDEO

AV IN 1

SERVICE

2

1(DVI)

ANTENNA/

CABLE IN

OPTICAL

DIGITAL AUDIO OUT

10

11

11

AV IN 2

L/ MONO

R

AUDIO

VIDEO

S-VIDEO

1

3

5

4

8

6

7

9

2

10

R

RGB IN

HDMI/DVI IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

1(DVI)

1

2

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

OPTICAL

MONO

( )

AUDIO

S-VIDEO

DIGITAL

AUDIO OUT

AV IN 1

SERVICE

1

3

5

4

6

7

9

2

10

8

10

11

PREPARATION

11

HDMI/DVI IN 1 (DVI), 2

Connect a HDMI (DVI) connection to either input.

COMPONENT IN

Connect a component video/audio device to these
jacks.

RGB (PC)

Connect the output from a PC.

AUDIO (RGB/DVI)

Connect the audio from a PC or DTV.

SERVICE

Remote Control Port

Connect a wired remote control.

ANTENNA/CABLE IN

Connect over-the air signals to this jack.
Connect cable signals to this jack.

DIGITAL AUDIO OUT

Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.

RS-232C IN (CONTROL & SERVICE) PORT

For external control devices.

AUDIO OUT

Connect analog audio to various types of equipment.

AV (Audio/Video) IN 1/2

Connect audio/video output from an external
device to these jacks.

S-VIDEO

Connect S-Video out from an S-VIDEO device.

Power Cord Socket

For operation with AC power.
Caution: Never attempt to operate the TV on DC

power.

1

11

2

3

4

5

6

8

7

9

10

PREPARATION

12

STAND INSTALLATION (Only 32/37 inches LCD TV models)

PREPARATION

Carefully place the product screen side down on
a cushioned surface that will protect product and
screen from damage.

Assemble the product stand with the product as
shown.

Securely install the 4 bolts provided.

1

2

3

■

Here shown may be somewhat different from your TV.

PREPARATION

13

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional)
There 4 threaded holes are available for attaching the bracket.

GG

Screw length needed depends on the wall mount used. For further information, refer to the VESA
Wall Mounting Instruction Guide.

NOTE

!

R

600 mm

400 mm

600 mm

400 mm

R

42/50PC5D

60PC1D

600 mm
(32 inches only: 200 mm)

400 mm
(32 inches only: 100 mm)

Plasma TV Model

LCD TV Model

PREPARATION

14

BACK COVER FOR WIRE ARRANGEMENT

PREPARATION

Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.

Connect the cables as necessary.
To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.

1

2

Install the CABLE MANAGEMENT as shown.

3

■

Here shown may be somewhat different from your TV.

CABLE MANAGEMENT

For 42/50PC5D

Arrange the cables as shown.

For 60PC1D

PREPARATION

15

LCD TV Model

Connect the cables as necessary.
To connect an additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT as shown.

How to remove the CABLE MANAGEMENT

GG

Hold the CABLE MANAGEMENT with both hands and
pull it backward.

CABLE MANAGEMENT

TWIST HOLDER

GG

Do not hold the CABLE MANAGEMENT when moving
the product.

- If the product is dropped, you may be injured or the
product may be broken.

NOTE

!

1

2

Bundle the cables using the supplied TWIST
HOLDER.

3

PREPARATION

16

DESKTOP PEDESTAL INSTALLATION

PREPARATION

For proper ventilation, allow a clearance of 4inches on all four sides from the wall.

GG

Ensure adequate ventilation by following the clearance recommendations.

CAUTION

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

42/50PC5D 60PC1D

Plasma TV Model

LCD TV Model

4 inches

PREPARATION

17

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wa ll
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the bronze wire
when connecting the antenna.

Copper Wire

GG

The TV will let you know when the analog, cable, and digital channel scans are complete.

NOTE

!

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal
Amplifier

VHF

3. Using both cable and antenna

Cable TV
Wall Jack

Antenna

RF Coaxial Wire (75 ohm)

RF Coaxial Wire (75 ohm)

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

R

ANTENNA/

CABLE IN

Diplexer

(Signal

Combiner)

■

Here shown may be somewhat different from your TV.

EXTERNAL EQUIPMENT SETUP

18

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you
do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown
below.

When connecting Component cable

1. How to connect

Connect the video outputs (Y, P

B, PR

)

of the digital set

top box to the

CC OOMMPPOONN EENNTT IINN VV IIDDEEOO 11

jacks on

the set. Match the jack colors
(Y = green, P

B

= blue, and P

R = red).

Connect the audio output of the digital set-top box to
the

CC OOMMPPOONN EENNTT IINN AAUU DDIIOO 11

jacks on the set.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select

CC oo mmpp oo nneenntt 11

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

CC OOMMPPOONNEE NN TT IINN22

input, select

CC oo mmpp oo nneenntt 22

input source.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

RGB IN

/DVI IN

AUDIO

(RGB/DVI)

RGB(PC)

REM

CONT

RS

(CONTR

( )

S-V

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

SERVICE

1

2

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component 1/2

Yes

Yes

Yes

Yes

Yes

HDMI1/DVI,

HDMI2

No

Yes

Yes

Yes

Yes

HDMI1/DVI-DTV, HDMI2-DTV mode

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.47 60.00

44.960 59.94

45.000 60.00

33.720 59.94

33.750 60.00

26.97 23.94

27.000 24.00

33.71 29.97

33.750 30.00

67.432 59.939

67.500 60.00

Resolution

720x480

1280x720

1920x1080i

1920x1080p

EXTERNAL EQUIPMENT SETUP

19

RGB IN

COMPONENT IN

AUDIO

(RGB/D

RGB(PC)

1

2

VIDEO

( )

HDMI/DVI IN

1 (DVI)

2

HDMI-DTV OUTPUT

When connecting HDMI cable

Connect the digital set-top box to

HHDDMMII //DDVVII II NN 11

((DDVVII ))

or

22

jack on the set.

No separated audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDD MM II11

or

HHDD MM II22

input source by using the

IINN PPUU TT

button on the remote control.

2

1

1

GG

When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player output
resolution will be automatically set to 720p.

GG

If the device does not support Auto HDMI, you need to set
the output resolution appropriately.

NOTE

!

EXTERNAL EQUIPMENT SETUP

20

EXTERNAL EQUIPMENT SETUP

When connecting HDMI to DVI cable

( )

COMPONENT IN

AV IN 1

ANTENNA/

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

HDMI/DVI IN

1 (DVI)

2

RGB IN

AUDIO

(RGB/DVI)

L R

DVI-DTV OUTPUT

RGB(PC)

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

Connect the DVI output of the digital set-top box to the

HHDDMMII //DDVVII II NN 11 ((DDVVII ))

jack on the set.

Connect the audio output of the digital set-top box to the

AA UUDD IIOO ((RR GGBB //DDVVII

))

jack on the set.

1. How to connect

■

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDD MM II11

input source by using the

IINN PPUU TT

button on the remote control.

2. How to use

2

1

1

2

EXTERNAL EQUIPMENT SETUP

21

DVD SETUP

When connecting Component cable

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

R

Video output ports

on DVD player

Y

Y

Y

Y

P

B

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

Connect the video outputs (Y, P

B, P

R

)

of the DVD to the

CC OOMMPPOONN EENNTT IINN VVII DDEE OO11

jacks on the set.

Match the jack colors
(

Y = green, P

B = blue, and P

R = red

)

.

Connect the audio outputs of the DVD to the
CC OOMMPPOONN EENNTT IINN AAUU DDIIOO11

jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

CC oo mmpp oo nneenntt 11

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

CC OOMMPPOONNEE NN TT IINN 22

input, select

CC oo mmpp oo nneenntt 22

input source.

■

Refer to the DVD player's manual for operating instructions.

2

1

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REM

CONT

RS

(CONTR

( )

S-VI

COMPONENT IN

1

2

VIDEO

AUDIO

Y L RPB PR

SERVICE

1 2

EXTERNAL EQUIPMENT SETUP

22

EXTERNAL EQUIPMENT SETUP

When connecting with an S-Video cable

Connect the S-VIDEO output of the DVD to the
SS --VVIIDDEEOO

input on the set.

Connect the audio outputs of the DVD to the

AA UUDDII OO

input jacks on the set.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on the

remote control.

■

If connected to

AA VV IINN 22

, select

AA VV 22

input source.

■

Refer to the DVD player's manual for operating instructions.

When connecting HDMI cable

Connect the HDMI output of the DVD to the
HHDDMMII //DDVVII II NN 11 ((DDVVII ))

or 22jack on the set.

No separated audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select

HHDD MM II11

or

HHDD MM II22

input source by using the

IINN PPUU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

2

1

(

)

N

IO

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

MONO

( )

AUDIO

S-VIDEO

AV IN 1

VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO

AUDIO

1

2

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI

RGB(PC)

1

2

VIDEO

A

( )

HDMI/DVI IN

1 (DVI)

2

HDMI-DVD OUTPUT

1

GG

When connected, the TV will tell a connected device what
resolution it supports and the resolution it prefers. If the
device supports this Auto HDMI function, the player out­put resolution will be automatically set to 720p.

GG

If the device does not support Auto HDMI, you need to
set the output resolution appropriately.

To get the best picture quality, adjust the output resolution
of the DVD to 720p.

NOTE

!

EXTERNAL EQUIPMENT SETUP

23

VCR SETUP

When connecting with an antenna

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■

Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long peri­od of time (Only Plasma TV model). If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen. This phenomenon is common to all manufactures and in conse­quence the manufactures warranty does not cover the product bearing this phenomenon.

Connect the RF antenna out socket of the VCR to the

AANN TTEENNNNAA//CCAABBLL EE IINN

socket on the set.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

2. How to use

2

1

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

MPONENT IN

AV IN 1

AUDIO

(RGB/DVI)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

( )

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

Wall Jack

Antenna

1

2

EXTERNAL EQUIPMENT SETUP

24

EXTERNAL EQUIPMENT SETUP

GG

Do not connect to both Video
and S-Video at the same time. In
the event that you connect both
Video and the S-Video cables,
only the S-Video will work.

CAUTION

When connecting with a RCA cable

GG

The picture quality is improved: compared to normal
composite (RCA cable) input.

NOTE

!

Connect the

AA UUDDII OO/VV IIDDEEOO

jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.

)

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on

the remote control.

■

If connected to

AA VV IINN 22

, select

AA VV 22

input source.

When connecting with an S-Video cable

Connect the S-VIDEO output of the VCR to the
SS --VVIIDDEEOO

input on the set.

Connect the audio outputs of the VCR to the

AA UUDDII OO

input jacks on the set.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR.
(

Refer to the VCR owner’s manual.

)

■

Select

AA VV 11

input source by using the

IINN PPUU TT

button on the

remote control.

■

If connected to

AA VV IINN 22

, select

AA VV 22

input source.

1

2

1

GG

If you have a mono VCR, connect the audio cable from the VCR to the

AA UUDDII OO

LL//MMOONNOO

jack of the set.

NOTE

!

B/DVI)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

1

( )

(

)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

AUDIO

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

1

2

EXTERNAL EQUIPMENT SETUP

25

OTHER A/V SOURCE SETUP

AV IN 2

L/MONO

R

AUDIO

VIDEO

S-VIDEO

L R

VIDEO

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks
between TV and external equipment.
Match the jack colors

.

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select

AA VV 22

input source by using the

IINN PPUU TT

button on the remote control.

■

If connected to

AA VV IINN 11

input, select

AA VV 11

input source.

■

Operate the corresponding external equipment.

1

ex) LCD TV Model

1

EXTERNAL EQUIPMENT SETUP

26

PC SETUP

EXTERNAL EQUIPMENT SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

When connecting D-sub 15 pin cable

Connect the RGB output of the PC to the

RR GGBB

((

PP CC

))

jack on the set.

Connect the PC audio output to the

AA UUDDII OO

((

RR GGBB //DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

RR GGBB--PP CC

input source by using the

IINN PPUU TT

button

on the remote control.

2

1

COMPONENT IN

1

2

(CO

VIDEO

AUDIO

( )

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

L R

RGB OUTPUT

CO

SERVICE

1

2

EXTERNAL EQUIPMENT SETUP

27

When connecting HDMI to DVI cable

Connect the DVI output of the PC to the

HHDDMMII //DDVVII II NN 11 ((DDVVII ))

jack on the set.

Connect the PC audio output to the

AAUUDDIIOO ((RRGGBB//DDVVII

))

jack on the set.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select

HHDDMMII11

input source by using the

IINN PPUU TT

button on the remote control.

2

1

COMPONENT IN

AV IN 1

CABLE IN

1

2

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

AUDIO OUT

VIDEO

MONO

( )

AUDIO

S-VIDEO

HDMI/DVI IN

1 (DVI)

2

RGB IN

AUDIO

(RGB/DVI)

L R

DVI-PC OUTPUT

RGB(PC)

( )

REMOTE

CONTROL IN

SERVICE

DIGITAL

AUDIO OUT

OPTICAL

1

2

GG

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.

GG

If the PC does not support Auto DVI, you need to set the output resolution appropriately.

NOTE

!

EXTERNAL EQUIPMENT SETUP

28

EXTERNAL EQUIPMENT SETUP

GG

To get the the best picture quality, adjust the PC
graphics card to 1920x1080, 60Hz.

GG

Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.

GG

Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC output to another resolu­tion, change the refresh rate to another rate or
adjust the brightness and contrast on the VIDEO
menu until the picture is clear. If the refresh rate of
the PC graphic card can not be changed, change

the PC graphic card or consult the manufacturer of
the PC graphic card.

GG

Avoid keeping a fixed image on the screen for a
long period of time. The fixed image may become
permanently imprinted on the screen.

GG

The synchronization input form for Horizontal and
Vertical frequencies is separate.

NOTES

!

RGB-PC, HDMI1/DVI-PC mode

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.720 59.799

47.130 59.65

Resolution

720x400

1360x768

640x350

* RGB-PC mode only: 640x350, 720X400

640x480

800x600

1024x768

1280x768

1366x768

Supported Display Specifications