LG 42LB630V-ZA, 42LB631V-ZL, 47LB630V-ZA, 47LB631V-ZL, 55LB630V-ZA Owners Manual
...
OWNER’S MANUAL
*
LED TV
* LG LED TV applies LCD
screen with LED backlights.
Click! User Guide
Please read this manual carefully before operating your set and retain
it for future reference.
LB63** LB69** LB87**
LB65** LB72**
LB67** LB73**
LB68** LB86**
*MFL68027018*
P/NO : MFL68027018(1402-REV00)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
3 EXTERNAL CONTROL DEVICE
SETUP
4 SAFETY INSTRUCTIONS
10 - Viewing 3D Imaging (Only 3D models)
12 INSTALLATION PROCEDURE
12 ASSEMBLING AND PREPARING
12 Unpacking
16 Separate purchase
17 Parts and buttons
19 - Using the Joystick button
20 Lifting and moving the TV
21 Setting up the TV
21 - Attaching the stand
26 - Attaching the Sound Bar Supporter
28 Mounting on a table
29 Mounting on a wall
30 Tidying cables
31 Using Built-in Camera
32 - Preparing Built-in Camera
32 - Name of Parts of Built-in Camera
32 - Checking the Camera’s Shooting
Range
33 MAKING CONNECTIONS
33 Antenna connection
34 Satellite dish connection
34 HDMI connection
35 Headphone connection
36 DVI to HDMI connection
37 Component connection
38 Composite connection
39 MHL connection
39 Audio connection
39 - Digital optical audio connection
40 USB connection
40 CI module connection
41 Euro Scart connection
42 REMOTE CONTROL
44 MAGIC REMOTE FUNCTIONS
45 Registering Magic Remote
45 How to use Magic Remote
46 Precautions to Take when Using the
Magic Remote
46 USING THE USER GUIDE
47 MAINTENANCE
47 Cleaning your TV
47 - Screen, frame, cabinet and stand
47 - Power cord
47 TROUBLESHOOTING
48 SPECIFICATIONS
WARNING
If you ignore the warning message, you
y
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yIf you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
The note helps you understand and use
y
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP
3
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
ENGLISH
4
SAFETY INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control in the following environments:
y
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce
heat
- Near kitchen counters or humidifiers where they can easily be exposed
to steam or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product
deformation.
Do not place the product where it might be exposed to dust.
y
This may cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains electric
y
supply.This plug must remain readily attached and operable when TV is in
use.
Do not touch the power plug with wet hands. Additionally, if the cord pin is
y
wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains socket with
y
Grounded earth pin. (Except for devices which are not grounded on earth.)
Otherwise possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if not secured
y
completely into socket, fire ignition may break out.
Ensure the power cord does not come into contact with hot objects such as
y
a heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
y
Otherwise, this may result in fire or electric shock.
SAFETY INSTRUCTIONS
Desiccant
5
Bend antenna cable between inside and outside building to prevent rain
y
from flowing in.
This may cause water damaged inside the Product and could give an
electric shock.
When mounting TV onto wall make sure to neatly install and isolate cabling
y
from rear of TV as to not create possibility of electric shock /fire hazard.
Do not plug too many electrical devices into a single multiple electrical
y
outlet.
Otherwise, this may result in fire due to over-heating.
Do not drop the product or let it fall over when connecting external devices.
y
Otherwise, this may result in injury or damage to the product.
Keep the anti-moisture packing material or vinyl packing out of the reach of
y
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake,
force the patient to vomit and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
y
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not
y
consume them.
Please seek Doctor- Medical Attention immediately if child consumes
batteries.
ENGLISH
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
y
screwdriver) between power cable plug and input Wall Socket while it is
connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal. You may be
electrocuted.
(Depending on model)
Do not put or store inflammable substances near the product.
y
There is a danger of combustion/explosion or fire due to careless handling
of the inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into
y
the product, or inflammable objects such as paper and matches. Children
must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into
the product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance
y
(thinner or benzene). Fire or electric shock accident can occur.
6
SAFETY INSTRUCTIONS
ENGLISH
Do not allow any impact, shock or any objects to fall into the unit, and do
y
not drop anything onto the screen.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
y
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows
y
and ventilate.
It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the product at your own discretion.
y
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact
y
your local service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the TV
y
for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can
cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping or splashing and no objects
y
filled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil mist.
y
This may damage the product and cause it to fall.
CAUTION
Install the product where no radio wave occurs.
y
There should be enough distance between an outside antenna and power
y
lines to keep the former from touching the latter even when the antenna
falls.
This may cause an electric shock.
SAFETY INSTRUCTIONS
7
Do not install the product on places such as unstable shelves or inclined
y
surfaces. Also avoid places where there is vibration or where the product
cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or
damage to the product.
If you install the TV on a stand, you need to take actions to prevent the
y
product from overturning. Otherwise, the product may fall over, which may
cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
y
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
y
When installing the antenna, consult with a qualified service technician. If
y
not installed by a qualified technician, this may create a fire hazard or an
electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7 times the
y
diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
y
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
y
This may cause the batteries to overheat and leak.
ENGLISH
Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight ,
y
open fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.
y
Make sure there are no objects between the remote control and its sensor.
y
Signal from Remote Control can be interrupted due to external/internal
y
lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game consoles, make
y
sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage
the product.
Do not turn the product On/Off by plugging-in or unplugging the power plug
y
to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
8
SAFETY INSTRUCTIONS
ENGLISH
Please follow the installation instructions below to prevent the product from
y
overheating.
- The distance between the product and the wall should be more than
10 cm.
- Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for
y
long periods as the ventilation openings may become hot. This does not
affect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
y
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
y
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being
y
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the
appliance.
Do not press strongly upon the panel with a hand or sharp object such
y
as nail, pencil or pen, or make a scratch on it, as it may cause damage to
screen.
Avoid touching the screen or holding your finger(s) against it for long
y
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
When cleaning the product and its components, unplug the power first and
y
wipe it with a soft cloth. Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe with a wet cloth. Never use
glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage
(deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
y
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at the
y
plug.
Don’t pull at the cord to unplug the power cord from the power board, as
this could be hazardous.
When moving the product, make sure you turn the power off first. Then,
y
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard
or cause electric shock.
SAFETY INSTRUCTIONS
9
When moving or unpacking the product, work in pairs because the product
y
is heavy.
Otherwise, this may result in injury.
Contact the service centre once a year to clean the internal parts of the
y
product.
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when
y
the apparatus has been damaged in any way, such as power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it
y
is turned on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million
y
to six million pixels. You may see tiny black dots and/or brightly coloured
dots (red, blue or green) at a size of 1 ppm on the panel. This does not
indicate a malfunction and does not affect the performance and reliability of
the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and color of the panel depending on your
y
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
ENGLISH
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
y
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders
of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
y
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise
is generated from a high-speed switching circuit, which supplies a large amount of current to
operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
10
SAFETY INSTRUCTIONS
ENGLISH
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
Viewing Time
y
- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a
long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
Some users may experience a seizure or other abnormal symptoms when they are exposed to a
y
ashing light or particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as
y
epilepsy, cardiac disorder, or blood pressure disease, etc.
y3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
y
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
y
When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
y
the symptom subsides.
- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or
fatigue.
SAFETY INSTRUCTIONS
CAUTION
Viewing Environment
y Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If
you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
yInfants/Children
- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
Teenagers
y
- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
Elderly
y
- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than
the recommended distance.
11
ENGLISH
Cautions when using the 3D glasses
y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
y Using modied 3D glasses may cause eye strain or image distortion.
y Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
y The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
12
<
<
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
NOTE
Image shown may differ from your TV.
y
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
y
The available menus and options may differ from the input source or product model that you are
y
using.
New features may be added to this TV in the future.
y
The TV can be placed in standby mode in order to reduce the power consumption. And the TV
y
should be turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
y
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* If the TV is turned on for the rst time after it was shipped from the factory, initialization of the TV may
take up to one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
Any damage or injuries caused by using unapproved items are not covered by the warranty.
y
Some models have a thin film attached on to the screen and this must not be removed.
y
NOTE
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
y
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
y
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
A
B
*A
10 mm
=
18 mm
*B
A
=
ENERGY
SAVING
1 2 3
4 5 6
7 809
LIST
MENU
BACK
ASSEMBLING AND PREPARING
13
ENGLISH
AV MODE
INPUT
TV
FLASHBK
MARK
FAV
P
A
G
3D
CHVOL
E
MUTE
INFO
Q.MENU
ENTER
EXIT
L/R SELECT
FREEZE
RATIO
Remote Control, Batteries
(AAA)
(Depending on model)
The remote control will not be
included for all sales market.
(See p. 42, 43)
Tag On
Magic Remote, Batteries
(AA)
(Only LB67**, LB68**,
LB69**, LB72**, LB73**,
LB86**, LB87**)
(See p. 44)
Tag on Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
(Only LB65**, LB67**,
LB68**, LB69**, LB72**,
LB73**, LB86**, LB87**)
Cable Holder
(Depending on model)
(See p. 30, 31)
Cable Managements
2EA
(Only LB63**, LB65**-ZA/
ZK/ZH/ZL, LB67**, LB68**,
LB69**, LB72**, LB73**-ZA)
(See p. 30, 31)
Owner’s Manual
Dual Play Glasses
(Depending on model)
Cable Managements
2EA
(Only LB73**-ZD/ZE)
(See p. 31)
ENGLISH
14
ASSEMBLING AND PREPARING
Power Cord Stand Screws
2EA, M4 x L20
(Only 32/39LB65**-ZE/ZN)
4EA, M4 x L20
(Only 32LB65**-ZA/ZK)
(See p. 21, 22, 23)
Stand Screws
4EA, M4 x L20
(Only LB65**-ZE/ZN)
(See p. 22, 23)
Stand Screws
4EA, M4 x L10
(Only LB73**-ZD/ZE)
(See p. 24)
Stand Screws
4EA, M4 x L14
(Only LB63**, 39LB65**-ZA/
ZK, 42/47/50/55/60/70LB65**,
LB67**, LB68**, LB69**,
LB72**, LB73**)
8EA, M4 x L14
(Only LB86**, LB87**)
(See p. 21, 22, 24, 25, 26, 27)
Rubbers
2EA
(Only LB65**-ZE/ZN)
(See p. 26)
Stand Bases
(Only LB63**-ZA,
32/39/42/47/50/55LB65**ZA)
(See p. 21)
Stand Bases
(Only LB63**-ZL, LB65**-ZK)
(See p. 22)
Stand Base/Stand Body
(Only LB65**-ZE/ZN)
(See p. 22, 23)
ASSEMBLING AND PREPARING
15
ENGLISH
Stand Assys
(Stand Base/Stand Body)
(Only 70LB65**-ZA, LB67**,
LB68**, LB69**, LB72**,
LB73**-ZA)
(See p. 21)
Stand Assys
(Only LB86**, LB87**)
(See p. 25)
Screw Covers
(Only LB86**, LB87**)
(See p. 25, 27)
Stand Front
(Only LB73**-ZD/ZE)
(See p. 24)
Sound Bar
(Only LB86**, LB87**)
(See p. 25, 26)
Component Gender
Cable
(Only LB86**, LB87**)
(See p. 37)
Stand Supporters
(Only LB73**-ZD/ZE)
(See p. 24)
Sound Bar Supporters
(Only LB86**, LB87**)
(See p. 26)
Composite Gender
Cable
(Only LB86**, LB87**)
(See p. 37, 38)
Scart Gender Cable
(Only LB86**, LB87**)
(See p. 41)
Wall Mount Spacers
2EA
(Only 42LB63**, 42LB65**)
(See p. 30)
16
ASSEMBLING AND PREPARING
ENGLISH
Separate purchase
Separate purchase items can be changed or modied for quality improvement without any notication.
Contact your dealer to buy these items.
These devices only work with certain models.
AG-F***DP
Dual Play Glasses
AN-VC5**
Video Call Camera LG Audio Device Tag on
Compatibility
AG-F***DP
Dual Play Glasses
AG-F***
Cinema 3D Glasses
AN-MR500
Magic Remote
AN-VC5**
Video Call Camera
LG Audio Device
Tag On
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
AG-F***
Cinema 3D Glasses
LB63** LB65**
• • •
• • •
• • • •
• • •
• • • •
• • • •
AN-MR500
Magic Remote
LB67**, LB68**,
LB69**, LB72**,
LB73**, LB86**
LB87**
ASSEMBLING AND PREPARING
17
Parts and buttons
A type : LB63**-ZA, LB65**-ZA B type : LB63**-ZL, LB65**-ZK
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button
2
Remote control and
Intelligent1 sensors
Power Indicator
C type : LB65**-ZE/ZN D type : LB67**, LB68**, LB69**, LB72**,
Screen
Screen
Speakers
LB73**-ZA
Screen
Joystick Button
2
ENGLISH
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
2
Joystick Button
2
18
ASSEMBLING AND PREPARING
ENGLISH
Screen
Remote control and
Intelligent1 sensors
Power Indicator
Speakers
Joystick Button
F type : LB86**, LB87**E type : LB73**-ZE/ZD
Built-in Camera
Screen
(Only LB87**)
Speakers
LG Logo light
Remote control and
Intelligent1 sensors
2
Joystick Button
2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
You can set the LG Logo Light or Power Indicator Light to on or off by selecting OPTION in the
y
main menus. (Depending on model)
Loading...