LG 50PG25, 50PG60, 4270, 4760, 4770 User Manual

...

Page 1

Please read this manual carefully before operating your set.

Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

LCD TV PLASMA TV OWNER’S MANUAL

LCD TV MODELS

32LG30 37LG50 37LG30 42LG50 42LG30 47LG50

52LG50

32LG60 32LG70 37LG60 42LG70 42LG60 47LG70 47LG60 52LG70 52LG60

PLASMA TV MODELS

42PG25 50PG25

50PG60 60PG60

P/NO : SAC30708020 (0803-REV04)

www.lgusa.com / www.lg.ca

As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).

Page 2

Page 3

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

Page 4

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.

When mounting a TV it on the wall, make sure not to install TV by the hanging power and signal cables on the back of the TV.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Unplug this apparatus when unused for long periods of time.

Page 5

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Never touch this apparatus or antenna during a thunder or lighting storm.

Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use

of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Outdoor use marking : WARNING - To reduce the risk of fire or elec-

tric shock, do not expose this appliance to rain or moisture.

Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.

GGRROOUUNN DDIINNGG Ensure that you connect the earth ground wire

to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

DDIISSCCOO NNNNEE CCTTII NNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The

plug must remain readily operable.

Power Supply

Short-circuit

Breaker

Page 6

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cable Management

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Attaching the TV to a Desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Protection Cover

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Securing the TV to the wall to prevent falling

. . . . 21

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . 22

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USB Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio Out Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WATCHING TV / CHANNEL CONTROL

Remote Control Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Turning On the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Quick Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Initial Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 56

- Add / Delete Channel (Manual Tuning) . . . . . .57

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Input Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

AV Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

SIMPLINK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

PICTURE CONTROL

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . . 72

Preset Picture Settings

- Picture Mode - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- Color Tone - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Manual Picture Adjustment

- Picture Mode - User Mode

. . . . . . . . . . . . . . . . . . . . . . . .

- Picture Mode - Expert Control

. . . . . . . . . . . . . . . . . .

Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . . . 78

Advanced Control - Black (Darkness) Level

. . . . . . .

Advanced Control - Eye Care

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Advanced - Real Cinema/Film Mode

. . . . . . . . . . . . . . . . . 81

Advanced - TruMotion

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

TruMotion Demo

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Image Sticking Minimization (ISM) Method

. . . . . .

Power Saving Picture Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 7

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 88

Preset Sound Settings (Sound Mode)

. . . . . . . . . . . . . .89

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

Clear Voice

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . 95

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

On-Screen Menus Language Selection

. . . . . . . . . . . . . .97

Caption Mode

- Analog Broadcasting System Captions

. . . . . . .

- Digital Broadcasting System Captions

. . . . . . . .

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 0

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

101

- Manual Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 3

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 4

Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . .

10 6

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 9

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

110

Downloadable Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

115

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

116

Key lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

117

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 0

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

Programming the Remote Control

. . . . . . . . . . . . . . . . . . 12 4

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

External Control Through RS-232C

. . . . . . . . . . . . . . . . .12 9

Open Source License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 6

Page 8

FEATURE OF THIS TV

is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. “

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

FOR LCD TV

■

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

■

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

■

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

Page 9

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images below.

OOppttiioonn EExxttrraass

FFoorr LLCCDD TTVV mmooddeellss

FFoorr PPllaassmmaa TTVV mmooddeellss

* Wipe spots on the exterior only with

the polishing cloth.

* Do not wipe roughly when removing

stain. Please be cautions of that excessive pressure may cause scratch or discoloration.

Polishing Cloth

(This feature is not available

for all models.)

D-sub 15 pin Cable

1.5V 1.5V

Owner’s Manual Power Cord

Remote Control,

Batteries

INPUT

FAV

MUTE

POWER

Q. MENU

ENTER

O L

123

456

FLASHBK

P A G

CD Manual

When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance.

32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

Bolts for stand assembly

(Refer to P.14)

(Only 32/37/42LG30, 37/42LG50,

32/42LG70)

Protection Cover

(Refer to P.20)

Screw for stand fixing

(Refer to P.18)

(Only 32LG30/70)

x 4 x 4

32/37/42/47/52LG60

Protection Cover

(Refer to P.20)

Cable Management

Clip

2EA

(M4x16)

4EA

(M4x20)

1EA 4EA 32LG60: 3EA

37LG60: 4EA

Bolts for stand assembly

(Refer to P.15)

(Only 32/37LG60) (Only 42LG60)

Cable Management Clip

Protection Cover

(Refer to P.20)

Cable Holder

(Only 50PG25,

50/60PG60)

(Only 42PG25)

Bolts for stand assembly

(Refer to P.14)

x 4

Page 10

PREPARATION

FRONT PANEL INFORMATION

PREPARATION

■

Image shown may differ from your TV.

■

NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).

Plasma TV Models

INPUT Button

MENU Button

ENTER Button

VOLUME (-, +) Buttons

CHANNEL (

EE,DD

)Buttons

Remote Control Sensor POWER Button

Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the TV is switched on.

LCD TV Models

POWER Button

Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the set is switched on. (Can be adjusted using

PPoowweerr IInnddiiccaattoorr

the OPTION menu.

pp..8855

)

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

Intelligent Sensor

Adjusts picture according to the surrounding conditions

32/42/47/52LG70

Remote Control Sensor

INPUT

ENTER

VOL

ENTER

INPUT

Page 11

PREPARATION

LCD TV Models

POWER Button

Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the set is switched on. (Can be adjusted using

PPoowweerr IInnddiiccaattoorr

the OPTION menu.

pp..8855

)

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

Intelligent Sensor

Adjusts picture according to the surrounding conditions.

Intelligent Sensor (Except 32/37/42LG30)

Adjusts picture according to the surrounding conditions

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

32/37/42LG30, 37/42/47/52LG50

32/37/42/47/52LG60

POWER Button Remote Control Sensor Power/Standby Indicator

Illuminates red in standby mode. Illuminates white when the set is switched on. (Can be adjusted using

PPoowweerr IInnddiiccaattoorr

the OPTION menu.

pp..8855

)

Remote Control Sensor

VOL

ENTER

INPUT

VOL

ENTER

INPUT

Page 12

PREPARATION

BACK PANEL INFORMATION

PREPARATION

Plasma TV Models

■

Image shown may differ from your TV.

AV IN 2

L/MONO

AUDIO

VIDEO

USB IN

HDMI IN 4

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

VIDEO

AUDIO OUT

OPTICAL COAXIAL

MONO

( )

AUDIO

S-VIDEO

DIGITAL AUDIO OUT

AV IN 1

HDMI/DVI IN

REMOTE

CONTROL IN

Page 13

PREPARATION

LCD TV Models

AV IN 2

L/MONO

AUDIO

VIDEO

HDMI IN 3 USB IN

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

HDMI/DVI IN

VIDEO

MONO

( )

AUDIO

S-VIDEO

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

DIGITAL

AUDIO OUT

OPTICAL

AUDIO OUT

AV IN 1

VIDEO

MONO

( )

AUDIO

S-VIDEO

HDMI/DVI IN

AV IN 2

L/MONO

AUDIO

VIDEO

USB

SERVUCE ONLY

HDMI IN 3

37/42/47/52LG50

32/37/42LG30

Page 14

PREPARATION

AV IN 2

L/MONO

AUDIO

VIDEO

HDMI IN 4 USB IN

■

Image shown may differ from your TV.

32/37/42/47/52LG60

32/42/47/52LG70

LCD TV Models

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

VIDEO

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

HDMI/DVI IN

VIDEO

MONO

( )

AUDIO

S-VIDEO

AV IN

L/MONO

AUDIO

VIDEO

HDMI IN 4 USB IN

(RGB/DVI)

AUDIO

RGB(PC)

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

123

COMPONENT IN

VIDEO

AUDIO

HDMI/DVI IN RGB IN

ANTENNA/

CABLE IN

Page 15

PREPARATION

HDMI/DVI IN, HDMI IN

Digital Connection. Supports HD video and Digital audio. Doesn’t

support 480i. Accepts DVI video using an adapter or HDMI to

DVI cable (not included)

COMPONENT IN

Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red

and white for audio.

RGB (PC)

Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).

AUDIO (RGB/DVI)

1/8” headphone jack for analog PC audio input.

REMOTE CONTROL IN PORT

For a wired remote control.

RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices.

ANTENNA/CABLE IN

Connect over-the air signals to this jack. Connect cable signals to this jack.

DIGITAL AUDIO OUT

Digital audio output for use with amps and home theater systems.

Includes an optical and/or coaxial connection. Note: In standby mode, these ports do not work.

AUDIO OUT

Analog audio output for use with amps and home theater systems.

AV (Audio/Video) IN

Analog composite connection. Supports standard definition video only (480i).

S-VIDEO

Better quality than standard composition. Supports standard definition video only (480i).

USB INPUT

Used for viewing photos and listening to MP3s.

USB SERVICE ONLY or RS-232C IN (SERVICE ONLY)

Used for software updates.

Power Cord Socket

For operation with AC power. Caution: Never attempt to operate the TV on DC

power.

Page 16

PREPARATION

STAND INSTALLATION

■

Image shown may differ from your TV.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

Assemble the parts of the

SS TTAANNDD BBOODDYY

with

CCOOVVEERR BBAASSEE

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

Only 42PG25 Only 32/37/42LG30, 37/42LG50, 32/42LG70

SS TTAANNDD BBOODD YY

CCOOVVEERR BBAASSEE

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Page 17

PREPARATION

Assemble the parts of the

SS TTAANNDD BBOODDYY

with

CCOOVVEERR BBAASSEE

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the back of the TV.

Only 32/37/42LG60

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

32LG60 37LG60 42LG60

(M4x16)

SS TTAANNDD BBOODD YY SS TTAANNDD BBOODD YY

CCOOVVEERR BBAASSEE

SS TTAANNDD BBOODD YY

CCOOVVEERR BBAASSEE

(M4x20)

Page 18

PREPARATION

CABLE MANAGEMENT

PREPARATION

■

Image shown may differ from your TV.

Plasma TV Models

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP as shown.

If your TV has the CABLE HOLDER, install it as shown and bundle the cables.

Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

- If the TV is dropped, you may be injured or the product may be broken.

NOTE

How to remove the CABLE MANAGEMENT CLIP

First, press the cable management. Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

with both

hands and pull it upward.

Separate

CCAABBLLEE MMAANN--

AAGG EEMMEENNTT CCLLIIPP

from TV

by pressing two latches.

Hold the CABLE MANAGEMENT CLIP with both

hands and pull it upward.

42PG25

50PG25, 50/60PG60

CABLE MANAGEMENT CLIP

CABLE HOLDER

Page 19

PREPARATION

LCD TV Models

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Install the CABLE MANAGEMENT CLIP as shown.

CABLE MANAGEMENT CLIP

Align the hole with the tab on the

CCAABBLLEE

MMAANNAAGGEEMMEENNTT CCLLIIPP

Turn the

CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP

shown. Note: This cable management clip can be bro-

ken by excessive pressure.

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.

32/37/42/47/52LG6032/37/42LG30, 37/42/47/52LG50,

32/42/47/52LG70

Page 20

PREPARATION

DESKTOP PEDESTAL INSTALLATION

PREPARATION

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

■

Image shown may differ from your TV.

4 inches

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

Ensure adequate ventilation by following the clearance recommendations.

CAUTION

ATTACHING THE TV TO A DESK (Only 32LG30/70)

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

WARNING

1-Screw

(provided as parts of the product)

Desk

Stand

Page 21

PREPARATION

VESA WALL MOUNTING

This TV accepts VESA FDMI compliant mounts via the four screw holes on the back of the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.

Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.

NOTE

Plasma TV Models

LCD TV Models

400 mm (Except 60PG60: 600 mm)

400 mm

200 mm (Except 52LG50/70: 800 mm)

32LG30/70: 100 mm 37LG30/50: 200 mm 42LG30/50/70: 200 mm 47LG50/70: 200 mm 52LG50/70: 400 mm

200 mm (Except 52LG60: 800 mm)

32LG60: 100 mm 37/42/47LG60: 200 mm 52LG60: 400 mm

32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

32/37/42/47/52LG60

Page 22

PREPARATION

PROTECTION COVER

PREPARATION

■

Image shown may differ from your TV.

Plasma TV Models

LCD TV Models

You can remove the stand before installing the TV on a wall mount by performing the previous stand instructions in reverse. After removing the stand, install the included

pprrootteecctt iioonn ccoovveerr

over the hole for the stand.

Insert the

PPRROOTTEECCTTIIOONN CCOOVVEERR

into the TV until clicking sound.

After removing the protection paper from the protection cover, adhere it to the TV as shown.

Page 23

PREPARATION

SECURING THE TV TO THE WALL TO PREVENT FALLING

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

■

You should purchase necessary components to prevent TV from falling off of the stand.

■

Image shown may differ from your TV.

Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

NOTE

Page 24

PREPARATION

ANTENNA OR CABLE CONNECTION

PREPARATION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wall Antenna Socket

Outdoor Antenna (VHF, UHF)

Cable TV Wall Jack

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire when connecting the antenna.

Copper Wire

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

Antenna

UHF

Signal Amplifier

VHF

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

■

To prevent damage do not connect to the power outlet until all connections are made between the devices.

Page 25

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect

Connect the video outputs (Y, P

B, P

)

of the digital set-

top box to the

CCOOMMPPOONN EENNTT IINN VVIIDDEEOO 11

jacks on

the TV. Match the jack colors (Y = green, P

= blue, and

= red).

Connect the audio output of the digital set-top box to the

CCOOMMPPOONN EENNTT IINN AAUUDDIIOO 11

jacks on the TV.

2. How to use

■

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box. operation

)

■

Select the

CCoo mmppoonneenntt 11

input source on the TV using

the

IINNPP UU TT

button on the remote control.

■

If connected to

CCOOMM PPOONNEENNTT IINN22

input, select the

CCoo mmppoo nneenntt 22

input source on the TV.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Image shown may differ from your TV.

Y, C

B, CR/

Supported Resolutions

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i 480p 720p

10 8 0 i

10 8 0 p

Component

Yes Yes Yes Yes Yes

HDMI

No Yes Yes Yes Yes

Page 26

EXTERNAL EQUIPMENT SETUP

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

RS-232

(CONTROL &

OPT

DIGI

S-VIDEO

COMPONENT IN

VIDEO

LYP

BPR

AUDIO

Y L RPB PR

(RGB/DVI)

AUDIO

RGB(PC)

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

123

HDMI/DVI IN RGB IN

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

YL R PB PR

32/37/42/47/52LG60

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

Page 27

EXTERNAL EQUIPMENT SETUP

HDMI Connection

Connect the digital set-top box to

HHDDMMII//DDVVII IINN11

22, 33

, or

jack on the TV.

No separate audio connection is necessary. HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMII11, HHDDMMII22, HHDDMMII33

, or

HHDDMMII44

input

source on the TV using the

IINNPPUUTT

button on the remote

control.

HDMI-DTV

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.939

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

Page 28

EXTERNAL EQUIPMENT SETUP

RGB IN

COMPONENT

(RG

RGB(PC)

VIDEO

HDMI/DVI IN

HDMI-DTV OUTPUT

RGB IN

COMPON

RGB(PC)

VIDEO

( )

HDMI/DVI IN

HDMI-DTV OUTPUT

(RGB/DVI)

AUDIO

RGB(PC)

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

RGB IN

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

HDMI/DVI IN

123

HDMI-DTV OUTPUT

32/37/42/47/52LG60

32/37/42LG30, 37/42/47/52LG50 Plasma TV, 32/42/47/52LG70

Page 29

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

32/37/42LG30, 37/42/47/52LG50, Plasma TV

- Connect the DVI output of the digital set-top box to the

HHDDMMII//DDVVII IINN 11, 22

, or 33jack on the TV.

32/37/42/47/52LG60, 32/42/47/52LG70

- Connect the DVI output of the digital set-top box to the

HHDDMMII//DDVVII IINN 11, 22, 33

, or 44jack on the TV.

Connect the PC audio output to the

AAUUDDII OO ((RRGGBB//DDVVII

))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.

)

■

32/37/42LG30, 37/42/47/52LG50, Plasma TV

- Select the

HHDDMMII11,HHDDMMII22

,or

HHDDMMII33

input source on the TV using the

IINNPPUUTT

button on the remote control.

■

32/37/42/47/52LG60, 32/42/47/52LG70

- Select the

HHDDMMII11,HHDDMMII22,HHDDMMII33

,or

HHDDMMII44

input source on the TV using the

IINNPPUUTT

button on the remote

control.

A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.

NOTE

Page 30

EXTERNAL EQUIPMENT SETUP

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONLY)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

HDMI/DVI IN

123

(RGB/DVI)

AUDIO

RGB(PC)

RGB IN

L R

DVI-DTV OUTPUT

32/37/42/47/52LG60

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

(CONT

VIDEO

LYP

BPR

AUDIO

HDMI/DVI IN

L R

DVI-DTV OUTPUT

32/37/42LG30, 37/42/47/52LG50

( )

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOT

CONTROL

(

VIDEO

LYP

BPR

AUDIO

AV IN 1

( )

HDMI/DVI IN

L R

DVI-DTV OUTPUT

Plasma TV, 32/42/47/52LG70

Page 31

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Component Connection

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

Video output ports

on DVD player

B-Y

R-Y

Connect the video outputs (Y, P

B, P

)

of the DVD to the

CCOOMMPPOONN EENNTT IINN VVIIDDEEOO11

jacks on the TV.

Match the jack colors (Y = green, P

B = blue, and PR

= red).

Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUU DDIIOO11

jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

CCoo mmppoonneenntt 11

input source on the TV using

the

IINNPP UU TT

button on the remote control.

■

If connected to

CCOOMM PPOONNEENNTT IINN 22

input, select the

CCoo mmppoo nneenntt 22

input source on the TV.

■

Refer to the DVD player's manual for operating instructions.

Page 32

EXTERNAL EQUIPMENT SETUP

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

RS-232C I

(CONTROL & SER

OPTICA

DIGITA

S-VIDEO

COMPONENT IN

VIDEO

LYP

AUDIO

Y L RPB PR

1 2

(RGB/DVI)

AUDIO

RGB(PC)

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

1 2 3

HDMI/DVI IN RGB IN

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

YL R PB PR

32/37/42/47/52LG60

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

Page 33

EXTERNAL EQUIPMENT SETUP

S-Video Connection

(Except 32/37/42/47/52LG60)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO LR

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO

AUDIO

Connect the S-VIDEO output of the DVD to the SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the DVD to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

AAVV11

input source on the TV using the

IINNPP UU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

Page 34

EXTERNAL EQUIPMENT SETUP

HDMI Connection

Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22, 33

or 44jack on the TV.

No separate audio connection is necessary. HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select the

HHDDMMII11, HHDDMMII22, HHDDMMII33

, or

HHDDMMII44

input

source on the TV using the

IINNPP UU TT

button on the remote

control.

■

Refer to the DVD player's manual for operating instructions.

COMPONENT IN

AUDIO

(RGB/D

RGB(PC)

VIDEO

LYP

BPR

HDMI/DVI IN

HDMI-DVD OUTPUT

(RGB/DVI)

AUDIO

RGB(PC)

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

RGB IN

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

HDMI/DVI IN

123

HDMI-DVD OUTPUT

32/37/42LG30, 37/42/47/52LG50

32/37/42/47/52LG60

RGB IN

COMPONENT

RGB(PC)

VIDEO

( )

HDMI/DVI IN

HDMI-DVD OUTPUT

Plasma TV, 32/42/47/52LG70

Page 35

EXTERNAL EQUIPMENT SETUP

VCR SETUP

Antenna Connection

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

■

Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time

(

Plasma TV models

only)

. If the 4:3 picture format is used; the fixed images on the sides of the screen

may remain visible on the screen. This phenomenon is common to all TVs and is not covered by warranty.

ANTENNA/

CABLE IN

COAXIAL

AUDIO OUT

AV IN 1

(MONO)

AUDIO

L R

S-VIDEO VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

Wall Jack

Antenna

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONLY)

OPTIC

COAX

ANTENNA/

CABLE IN

COMP

AUDIO

L R

S-VIDEO VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

Wall Jack

Antenna

Connect the RF antenna out socket of the VCR to the

AANNTTEENNNNAA//CC AABBLLEE IINN

sock-

et on the TV.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

2. How to use

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

32/37/42/47/52LG60

Page 36

EXTERNAL EQUIPMENT SETUP

L R

S-VIDEO VIDEO

OUTPUT SWITCH

ANT IN

ANT OUT

AV IN

L/MONO

AUDIO

VIDEO

HDMI IN 4 USB IN

Composite (RCA) Connection

If you have a mono VCR, connect the audio cable from the VCR to the

AAUUDDIIOO LL//MMOONNOO

jack of the TV.

NOTE

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

32/37/42/47/52LG60

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR. (

Refer to the VCR owner’s manual.

)

■

Select the

AAVV11

input source on the TV using the

IINNPP UU TT

button on the remote control.

■

If connected to

AAVV IINN22

, select

AAVV22

input source on the TV.

Page 37

EXTERNAL EQUIPMENT SETUP

Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

CAUTION

S-Video provides better quality than composite. Use it when available.

NOTE

S-Video Connection

(Except 32/37/42/47/52LG60)

AUDIO

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO LR

(MONO)

AUDIO

S-VIDEO

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

Connect the S-VIDEO output of the VCR to the SS --VVIIDDEEOO

input on the TV.

Connect the audio outputs of the VCR to the

AAUUDDIIOO

input jacks on the TV.

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR. (

Refer to the VCR owner’s manual.

)

■

Select the

AAVV11

input source on the TV using the

IINNPP UU TT

button on the remote control.

Page 38

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

EXTERNAL EQUIPMENT SETUP

L/MONO

AUDIO

VIDEO

HDMI IN 3 USB IN

L R

VIDEO

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and external equipment. Match the jack colors

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select the

AAVV22

input source on the TV using

the

IINNPP UU TT

button on the remote control.

■

If connected to

AAVV IINN11

input, select the

AAVV11

input source on the TV.

■

Operate the corresponding external equipment.

Page 39

EXTERNAL EQUIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection

Connect the VGA output of the PC to the

RRGGBB ((PP CC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDII OO ((RRGGBB//DDVVII

))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

RRGGBB-- PPCC

input source on the TV using the

IINNPP UU TT

button on the remote control.

COMPONENT IN

REMOTE

CONTROL IN

(CO

VIDEO

LYP

BPR

AUDIO

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

RGB OUTPUT

AUDIO

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONL Y)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

123

HDMI/D

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

(RGB/DVI)

AUDIO

RGB(PC)

RGB IN

RGB OUTPUT

AUDIO

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

32/37/42/47/52LG60

Page 40

EXTERNAL EQUIPMENT SETUP

32/37/42LG30, 42/50PG25: To get the the best picture quality, adjust the PC graphics card to 1360x768.

37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70, 50/60PG60: To get the the best picture quality, adjust the PC graphics card to 1920x1080.

Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.

In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-

ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

Avoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen.

The synchronization input form for Horizontal and Vertical frequencies is separate.

NOTES

DVI to HDMI Connection

32/37/42LG30, 37/42/47/52LG50, Plasma TV

- Connect the DVI output of the PC to the

HHDDMMII//DDVVII IINN 11, 22

, or

jack on the TV.

32/37/42/47/52LG60, 32/42/47/52LG70

- Connect the DVI output of the PC to the

HHDDMMII//DDVVII IINN 11, 22, 33

, or

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO ((RRGGBB//DDVVII))

jack on the TV.

1. How to connect

■

Turn on the PC and the TV.

■

32/37/42LG30, 37/42/47/52LG50, Plasma TV

- Select the

HHDDMMII11,HHDDMMII22

,or

HHDDMMII33

input source on the TV using the

IINNPP UU TT

button on the remote control.

■

32/37/42/47/52LG60, 32/42/47/52LG70

- Select the

HHDDMMII11,HHDDMMII22,HHDDMMII33

,or

HHDDMMII44

input source on the TV using the

IINNPP UU TT

button on the remote

control.

2. How to use

Page 41

EXTERNAL EQUIPMENT SETUP

REMOTE

CONTROL IN

RS-232C IN

(SERVICE ONLY)

OPTICAL

COAXIAL

DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

COMPONENT IN

VIDEO

AUDIO

HDMI/DVI IN

123

(RGB/DVI)

AUDIO

RGB(PC)

RGB IN

DVI-PC OUTPUT

AUDIO

32/37/42/47/52LG60

RGB IN

COMPONENT IN

AUDIO

(RGB/DVI)

RGB(PC)

REMOTE

CONTROL IN

(CO

VIDEO

LYP

AUDIO

AV IN 1

( )

HDMI/DVI IN

DVI-PC OUTPUT

AUDIO

COMPONENT IN

REMOTE

CONTROL IN

(CONT

VIDEO

LYP

AUDIO

HDMI/DVI IN

RGB IN

AUDIO

(RGB/DVI)

RGB(PC)

DVI-PC OUTPUT

AUDIO

32/37/42LG30, 37/42/47/52LG50

Plasma TV, 32/42/47/52LG70

Page 42

EXTERNAL EQUIPMENT SETUP

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.720 59.799

47.130 59.65

Resolution

720x400

1360x768

640x350

640x480

800x600

1024x768

1280x768

1366x768

Supported Display Specifications (RGB-PC, HDMI-PC)

For 32/37/42LG30

For 37/42/47/52LG50, 32/37/42/47/52LG60,

32/42/47/52LG70

* Only RGB-PC mode

Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

If there are overscan in HDMI-PC 1920x1080, change aspect ratio to

JJuusstt ssccaann

NOTE

Resolution

720x400

1360x768

640x350

640x480

800x600

1024x768

1280x1024

1600x1200

1920x1080

RGB-PC

1920x1080

HDMI-PC

1280x768

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.468 70.09

31.469 70.08

31.469 59.94

37.500 75.00

37.861 72.80

35.156 56.25

37.879 60.31

46.875 75.00

48.077 72.18

48.363 60.00

56.476 70.06

60.023 75.02

47.776 59.87

60.289 74.893

63.981 60.02

79.976 75.025

47.712 60.015

75.00 60.00

66.587 59.934

67.5 60.00

* Only RGB-PC mode

Page 43

EXTERNAL EQUIPMENT SETUP

Resolution

720x400

1360x768

640x350

640x480

800x600

1024x768

1280x1024

1600x1200

1920x1080

1280x768

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.468 70.09

31.469 70.08

31.469 59.94

37.500 75.00

37.861 72.80

35.156 56.25

37.879 60.31

46.875 75.00

48.077 72.18

48.363 60.00

56.476 70.06

60.023 75.02

47.776 59.87

60.289 74.893

63.981 60.02

79.976 75.025

47.712 60.015

75.00 60.00

66.587 59.934

For 42/50PG25, 50/60PG60

* Only RGB-PC mode

Page 44

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

Selecting Resolution

You can choose the resolution in RGB-PC mode. The

PP oossiittiioonn, PP hhaa ss ee

, and

SSii zzee

can also be adjusted.

Select

PP IICCTTUURREE

Select

SS ccrreeeenn ((RRGGBB--PPCC))

Select

RReessoolluuttiioonn

Select the desired resolution.

1024 x 768

1280 x 768

1360 x 768

1366 x 768

Auto config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

ENTER

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Only for 32/37/42LG30

Page 45

EXTERNAL EQUIPMENT SETUP

Auto Configure

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.

Select

SS ccrreeeenn ((RRGGBB--PPCC))

Select

AAuuttoo ccoonnffiigg..

Auto config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

ENTER

Select

YYeess

ENTER

Start Auto Configuration.

ENTER

Select

PP IICCTTUURREE

• If the position of the image is still not correct, try Auto adjustment again.

• If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the

PP ooss iitt iioo nn, SS iizz ee

PP hhaa ssee

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Yes No

Page 46

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.

This feature operates only in RGB-PC mode.

Select

PP oossiittiioonn, SS iizzee

, or

PP hhaa ssee

Make appropriate adjustments.

Auto config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

ENTER

■

PP oossiittiioonn

: This function is to adjust picture to left/right and up/down as you prefer.

■

SS iizzee

: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.

■

PP hh aass ee

: This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Select

PP IICCTTUURREE

Select

SS ccrreeeenn ((RRGGBB--PPCC))

ENTER

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Page 47

EXTERNAL EQUIPMENT SETUP

Screen Reset (Reset to original factory values)

Returns

PP oo ssii ttiioonn, SS iizzee

, and

PP hhaassee

to the default factory settings.

This feature operates only in RGB-PC mode.

Auto config.

Position

Resolution

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

Select

RReesseett

ENTER

Select

PP IICCTTUURREE

Select

SS ccrreeeenn ((RRGGBB--PPCC))

ENTER

Select

YYeess

ENTER

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Yes No

Page 48

EXTERNAL EQUIPMENT SETUP

USB CONNECTION

(Except 32/37/42LG30)

EXTERNAL EQUIPMENT SETUP

AV IN 2

L/MONO

AUDIO

VIDEO

HDMI IN 3 USB IN

Connect the USB device to the

UUSSBB II NN

jack on the side

of TV.

1. How to connect

2. How to use

■

After connecting the

UUSSBB II NN

jack, you use the USB func-

tion. (

pp..6644

)

i.e)

Page 49

EXTERNAL EQUIPMENT SETUP

AUDIO OUT CONNECTION

Send the TV’s audio to external audio equipment via the Audio Output port.

RS-232C IN

(CONTROL & SERVICE)

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

L R

AUDIO

REMOTE

CONTROL IN

ANTENNA/

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

L R

AUDIO

OPTICAL COAXIAL

DIGITAL AUDIO OUT

AUDIO OUT

AV IN 1

VIDEO L R

(MONO)

AUDIO

S-VIDEO

When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (

pp..9933

)

NOTE

Do not look into the optical output port. Looking at the laser beam may damage your vision.

Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function.

CAUTION

Connect one end of the optical or coaxial cable to the TV’s

OOPP TTIICC AALL

CCOOAAXXIIAALL

(Except 32/37/42LG30)

port of

DDIIGGIITTAALL AAUUDDIIOO OOUUTT

Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu. (

pp..9933

). See the external audio equipment instruction manu-

al for operation.

1. How to connect

Connect audio outputs to the TV’s

AAUUDDIIOO OOUUTT

jacks.

Set the “TV Speaker option - Off” in the AUDIO menu. (

pp..9933

). See the external audio equipment instruction

manual for operation.

1. How to connect

Analog

(Except 32/37/42/47/52LG60)

Digital

Page 50

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

WATCHING TV / CHANNEL CONTROL

When using the remote control, aim it at the remote control sensor on the TV.

INPUT

FAV

MUTE

STB

POWER

Q. MENU MENU

AV MODERETURN

ENTER

VOL

123 456 7809

FLASHBK

P A G E

DVD VCR

TV/STB/DVD/VCR

POWER

Q.MENU

INPUT

VOLUME UP

/DOWN

FAV

MUTE

CHANNEL

UP/DOWN

PAGE

UP/DOWN

— (DASH)

FLASHBK

Select the remote operating mode: TV, STB, DVD, or VCR.

Turns your TV or any other programmed equipment on or off, depending on the mode.

Select the desired quick menu source.

pp..5511

Displays the main menu. Clear all on-screen displays and return to TV viewing from

any menu.

External input modes rotate in regular sequence.

Increase/decrease the sound level.

Scroll through the programmed Favorite channels.

pp..5511

Switch the sound on or off.

pp..5500

Select available channels.

Move from one full set of screen information to the next one.

Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

Tune to the last channel viewed.

Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices.

NUMBER button

VCR/DVD, USB,

SIMPLINK

Control buttons

Page 51

WATCHING TV / CHANNEL CONTROL

Installing Batteries

■

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -).

■

Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones.

■

Close cover.

THUMBSTICK

(Up/Down/Left

Right/ENTER)

RETURN

SIMPLINK

AV MODE

Navigate the on-screen menus and adjust the system settings to your preference.

Allows the user to move return one step in an interactive application or other user interaction function.

See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen.

pp..6622--6633

It helps you select and set images and sounds.

pp..6611

Page 52

WATCHING TV / CHANNEL CONTROL

TURNING ON THE TV

WATCHING TV / CHANNEL CONTROL

NOTE

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

First, connect power cord correctly. At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the ,

IINNPPUUTT,CCHH ((

DDEE

))

button on the TV or press the

PPOOWWEERR, IINNPPUUTT, CCHH((

or )),

NNuummbbeerr

((00~99))

button on the remote control.

Select the viewing source by using the

IINNPPUUTT

button on the remote control.

■

This TV is programmed to remember which power state it was last set to, even if the power cord is out.

When finished using the TV, press the

PPOOWWEERR

button on the remote control.

The TV reverts to standby mode.

Press the

CCHH ((

or ))or

NNUUMMBBEERR

buttons to select a channel number.

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the

VVOOLL ((++

--))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

VVOOLL ((++

--))

button.

Adjust the volume to suit your personal preference.

Page 53

WATCHING TV / CHANNEL CONTROL

QUICK MENU

Display each menu.

Make appropriate adjustments.

■

AAss ppeecctt RRaattiioo

: Selects your desired picture format.

■

PP oowweerr SSaavvii nngg

(Plasma TV Only): Adjusts screen brightness to reduce the power consumption of the TV.

■

BBaacckkll iigghhtt

(LCD TV Only): Adjust the brightness

of LCD panel to control the brightness of the screen.

■

CCllee aarr VVooiiccee

: By differentiating the human sound range from others, it helps make human voices sound better.

■

PP iiccttuurree MMooddee

: Selects the factory preset picture

depend on the viewing environment.

■

SS oouunndd MMooddee

: Selects the factory preset sound for

type of program.

■

CCaa ppttiioonn

: Select on or off.

■

MMuullttii AAuuddiioo

: Changes the audio language (Digital

signal). SS AAPP

: Selects MTS sound (Analog signal).

■

SS lleeee pp TTiimmeerr

: Select the amount of time before

your TV turns off automatically.

■

DDeell//AAdddd//FFaavv

: Select channel you want to add/delete

or add the channel to the Favorite List.

■

UUSS BB EEjj ee cctt

: Select “USB Eject” in order to eject

USB device.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Q. MENU

LCD TV

Q.Menu

16:9

Vivid

Off

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Backlight

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

Plasma TV

Q.Menu

Close Close

16:9

Vivid

Off

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Power Saving

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

Q. MENU

Return to TV viewing.

Except 32/37/42LG30

Page 54

WATCHING TV / CHANNEL CONTROL

INITIAL SETTING

WATCHING TV / CHANNEL CONTROL

This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. If will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus.

Select

HHoommee

Mode.

ENTER

Select

AAuuttoo

MMaa nnuuaall

Select desired time option.

ENTER

Year

Current Time Setting

2007

Month

Date

Hour

5 PM

Minute

Time Zone

Eastern

Daylight Saving

Off

Auto

ExitEnter

RETURN

Step2. Time Setting

Selecting the environment. Choose the setting mode you want.

In Store

Home

ExitEnter

RETURN

Step1. Mode Setting

Step1. Mode setting

Step2. Time setting

■

Default selection is “

HHoommee

”. We recommend setting the TV to “

HHoommee

” mode for the best picture in your

home environment.

■

“

IInn--ssttoorree

” Mode is only intended for use in retail environments. Customers can adjust the “

PP iiccttuurree

menu -

PP iiccttuurree mmooddee

” manually while inspecting the TV, but the TV will automatically return to preset in-store

mode after 5 minutes.

Page 55

WATCHING TV / CHANNEL CONTROL

Select

OOSSDD LLaanngguuaaggee SSeettttiinn gg

AAuuddiioo LLaanngg uuaaggee SSeettttiinngg

Start

AAuu ttoo TTuunniinngg

Select your desired language.

ENTER

Auto Tuning can change channel map. Do you want to start Auto Tuning?

Enter

Exit

Enter

RETURN

Step4. Auto Tuning

ExitEnter

RETURN

Step3. Option Setting

1. OSD Language Setting

English

2. Audio Language Setting

French

Step3. Option setting

Step4. Auto Tuning

■

You can also adjust

IInniittiiaall SSeettttiinngg

in the

OOPPTTIIOONN

NOTE

Page 56

WATCHING TV / CHANNEL CONTROL

ON-SCREEN MENUS SELECTION

WATCHING TV / CHANNEL CONTROL

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

NOTE

IISS MM MMeetthhoodd, PP oowweerr SSaavviinngg

: Only

PP llaassmmaa TT VV

BBaacckklliigghhtt,, PPoowweerr IInnddiiccaattoorr,, TTrruuMMoottiioonn DD eemmoo

: Only

LL CCDD TTVV

(But,

TTrruuMM oottii oonn DD eemmoo

: Only for

3322//3377//4422//4477//5522LLGG6600,, 3322//4422//4477//5522LLGG7700

)

SSeett IIDD

: Except

3322//3377//4422//4477//5522LLGG6600

Display each menu.

Select a menu item.

Enter to the pop up menu.

ENTER

Return to TV viewing.

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

OPTION

PICTURE

LOCK

AUDIO

INPUT

TIME

USB

Enter

Move

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

Enter

Move

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

AUDIO

Enter

Move

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

TIME

Enter

Move

PHOTO LIST

MUSIC LIST

USB

Enter

Move

Antenna

Cable

AV1

AV2

Component1

Component2

RGB-PC

HDMI1

INPUT

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

OPTION

For USA For Canada

All models (Except 32/37/42LG30)

Page 57

WATCHING TV / CHANNEL CONTROL

Only for 32/37/42LG30

Display each menu.

Select a menu item.

Enter to the pop up menu.

ENTER

Return to TV viewing.

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

TIME

PICTURE

OPTION

AUDIO

LOCK

Enter

Move

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

Enter

Move

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

AUDIO

Enter

Move

Clock :

Feb/21/2008 2:10 AM

Off Time : Off

On Time : Off

Sleep Timer : Off

Auto Sleep : Off

TIME

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Enter

Move

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

OPTION

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

For USA For Canada

Page 58

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

WATCHING TV / CHANNEL CONTROL

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

Select

CCHHAANNNN EELL

Select

AAuu ttoo TTuunniinngg

Select

YYeess

Run

AAuu ttoo ttuunniinngg

Enter

Move

CHANNEL

Enter

Move

CHANNEL

ENTER

Auto Tuning

Manual Tuning

Channel Edit

Auto Tuning

Manual Tuning

Channel Edit

Press ‘Yes’ button to begin auto tuning.

Yes

■

A password is required to gain access to Auto Tuning menu if the Lock System is turned on.

RETURN

Return to the previous menu.

Return to TV viewing.

Page 59

WATCHING TV / CHANNEL CONTROL

Select

CCHHAANNNN EELL

ENTER

If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received.

Add/Delete Channel (Manual Tuning)

Enter

Move

CHANNEL

Enter

Move

CHANNEL

Channel

Select channel type and RF-channel number.

DTV

Delete

Auto Tuning

Manual Tuning

Channel Edit

DTV 2-1

Bad Normal Good

Select

MMaannuuaall TTuunn iinngg

Select

DDTTVV, TTVV, CCAADDTTVV

, or

CCAATTVV

Select channel you want to add or delete.

ENTER

Select

AAdddd

DDeelleettee

ENTER

Auto Tuning

Manual Tuning

Channel Edit

■

A password is required to gain access to Manual Tuning menu if the Lock System is turned on.

RETURN

Return to the previous menu.

Return to TV viewing.

Page 60

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

WATCHING TV / CHANNEL CONTROL

Select a channel.

Select channel you want to add or delete.

ENTER

A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray.

Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen.

Channel Editing

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Select

CCHHAANNNN EELL

ENTER

Select

CChhaannnneell EEddiitt

RETURN

Return to TV viewing.

Return to the previous menu.

Add/Delete

Move Page

Move

Exit

RETURN

Page 61

WATCHING TV / CHANNEL CONTROL

INPUT LIST

Only these input signals which are connected to a TV can be activated and selected.

Select the desired input source.

■

You can also select the desired input source in the

IINNPPUUTT

(Except 32/37/42LG30).

INPUT

Antenna Cable AV1 AV2 Component1

HDMI3 HDMI2 HDMI1 RGB-PC

Component2

Antenna Cable AV1 AV2 Component1

ENTER

■

AAnn tteennnnaa

: Select it to watch over-the-air broadcasts.

■

CCaa bbllee

: Select it to watch cable and digital cable.

■

AAVV

: Select them to watch a VCR or other external equipment.

■

CCoo mmppoonneenntt

: Select them to watch DVD or a Digital set-top box.

■

RRGGBB-- PPCC

: Select it to view PC input.

■

HHDDMMII

: Select them to watch high definition devices.

Antenna Cable AV1 AV2 Component1

Input Label

Q.MENU

Exit

RETURN

Select a desired input source (except AAnntteennnnaa

CCaabbllee

). Then, you can select your desired Input Label with using Q. MENU button.

pp..6600

Disconnected input is inactivated.

ie)

32/37/42LG30, 37/42/47/52LG50

Antenna

Cable AV1 AV2 Component1

HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC

Component2

Plasma TV, 32/42/47/52LG70

Antenna

Cable AV Component1

HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC

Component2

32/37/42/47/52LG60

Page 62

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

WATCHING TV / CHANNEL CONTROL

You can set a label for each input source when it's not in use.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Select

OOPPTTIIOONN

Select

IInnppuutt LLaabbeell

Select the label.

ENTER

Select the source.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

With using OPTION menu

Select the source.

Select the label.

INPUT

Q. MENU

RETURN

Return to the previous menu.

Return to TV viewing.

With using INPUT button

■

When new external device is connected, this popup menu is displayed automatically. If selecting

YYeess

, you can select input source that you want to appreciate.

■

But, when selecting “

SS IIMMPPLLIINNKK- OO nn

”, popup menu for HDMI input will not be displayed.

Ye s

New external device is connected. Do you want to enjoy this?

Select input source that you want to appreciate.

AV1

AV2

Component1

AV1

FF GG

AV2

Component1

HDMI1

RGB-PC

Component2

HDMI2

HDMI3

AV1

FF GG

AV2

Component1

HDMI1

RGB-PC

Component2

HDMI2

HDMI3

HDMI4

FF GG

Component1

HDMI1

RGB-PC

Component2

HDMI2

HDMI3

HDMI4

Plasma TV, 32/42/47/52LG70

32/37/42/47/52LG60

32/37/42LG30, 37/42/47/52LG50

Page 63

WATCHING TV / CHANNEL CONTROL

AV MODE

You can select the optimal images and sounds.

AV MODE

Off Cinema

Game Sport

Press the

AAVV MMOODDEE

button repeatedly to select the desired source.

ENTER

■

If you select “

CCiinneemmaa

” in AV mode,

CCiinneemmaa

will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.

■

If you select “

OOffff

” in AV mode, the

“

PP iiccttuurree MMoodd ee

” and “

SS oouunndd MM ooddee

”

return to previous selected value.

Page 64

WATCHING TV / CHANNEL CONTROL

This function operates only with devices with the logo. The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and

settings. To start using SIMPLINK, turn it on in the user menus.

Enter

Move

OPTION

Select

OOPPTTIIOONN

Select

SS II MMPPLLIINNKK

Select

OOnn orOOffff

Enter

Move

OPTION

ENTER

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Off

NOTE

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop.

When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers.

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an OPTICAL cable.

RETURN

Return to the previous menu.

Return to TV viewing.

Page 65

WATCHING TV / CHANNEL CONTROL

■

DDiirreecctt PPll aayy::

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

SSeelleecctt AAVV ddeevviiccee::

Enables you to select one of the AV devices connected to TV.

■

DDiisscc ppllaayybbaacckk::

Control connected AV devices by pressing the ,

ENTER, G, A,

ll ll

, FFand GGbuttons.

■

PPoowweerr ooffff aallll ddeevviicceess::

When you power off the TV, all connected devices are turned off.

■

SSwwiitt cchh aauuddiioo--oouutt::

Offers an easy way to switch audio-out.

■

SSyynncc PPoowweerr oo nn::

When you play the connected AV device, TV will automatically turn on.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.2 with *CEC function should be used. (*CEC: Consumer Electronics Control).

SIMPLINK Menu

TTVV vviieewwiinngg

: Switch to the previous TV

channel regardless of the current mode. DDII SSCC ppllaayybbaacckk

: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.

VVCCRR pp llaayybbaacc kk

: Control the connected

VCR. HHDDDD RReecc oorrddiinnggss ppllaayybbaa cckk

: Control

recordings stored in HDD. AAuuddiioo OOuutt ttoo HHoommee TThheeaatteerr ssppeeaakk--

eerr//AAuuddiioo OOuutt ttoo TTVV

: Select Home Theater speaker or TV speaker for Audio Out.

SIMPLINK Functions

When no device is connected (displayed in gray)

Selected Device

When a device is connected (displayed in bright color)

Display

SS II MMPPLLIINNKK

menu.

Select the desired device.

Control connected AV devices.

ENTER

Page 66

USB

ENTRY MODES

When you connect a USB device, this screen is displayed automatically. In USB device, you can not add a new folder or delete the existing folder.

Precautions when using the USB device

Only a USB storage device is recognizable.

If the USB storage device is connected through a USB hub, the device is not recognizable.

A USB storage device using an automatic recognition program may not be recognized.

A USB storage device which uses its own driver may not be recognized.

In case of a card reader, up to four memory cards are concurrently recognizable.

The recognition speed of a USB storage device may depend on each device.

Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files.

Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized.

Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized.

Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized.

Some USB storage devices may not be supported or operated smoothly.

File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters.

Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.

When removing the USB device

Connect the USB device to the

UUSS BB IINN

jacks on the side of TV.

Select

PP HHOOTTOO LLIISSTT orMMUUSSIICC LLII SSTT

PHOTO LIST MUSIC LIST

Select

UUSS BB EEjjeecctt

Select the

UUSS BB EEjjeecctt

menu before removing the

USB device.

ENTER

Q. MENU

ENTER

* This feature is only for 37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70, Plasma TV.

■

It doesn’t support USB HDD

■

This TV supports JPG and MP3.

Page 67

PHOTO LIST

USB

You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different.

Screen Components

Moves to upper level file Preview: Display the

thumbnail/folder name of the photo in the selected folder

Current page/Total pages Total number of marked photos Usable USB memory Corresponding buttons on

the remote control

Supported photo file: *.JPG

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

Navigate PopUp Menu Move Page Mark Exit

2Folders, 4Files

3 4

Select

UUSSBB

Select

PP HH OO TTOO LLIISSTT

TOP FOLDER

Drive1

ENTER

Drive1

FAV

RETURN

Page 68

USB

Photo Selection and Popup Menu

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366x768 125KB

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

■

Use the

CC HH

button to navigation in the

photo page.

■

Use the

FFAAVV

button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.

TOP FOLDER

Drive1

Select the desired Popup menu.

ENTER

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Drive1

Butterfly

Upper Photo X.Box

1366x768 125KB

View

Mark All

Delete

Cancel

When you select a file (not folder), this PopUp menu is displayed.

VViieeww

: Display the selected item.

MMaarrkk AAllll

: Mark all photos on the screen.

UUnnmmaarrkk AA llll

: Deselect all marked photos.

DDeelleettee

: Delete the selected photo item.

CCaa nncc ee ll

: Close the pop-up menu.

Page 69

USB

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.

■

Use the

CC HH

button to navigation in the

photo page.

The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.

1/17

Sideshow BGM Delete Option Hide

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select

VVii ee ww

The selected photo is displayed in full size.

ENTER

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

2Folders, 4Files

USB Device

Page 1/1

No Marked

PHOTO LIST

Upper

Free Space 150MB

1366x768 125KB

TOP FOLDER

Drive1

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Drive1

Butterfly

Upper Photo X.Box

1366x768 125KB

View

Mark All

Delete

Cancel

Page 70

USB

1/17

Sideshow BGM Delete Option Hide

Select the

SSiiddeesshhooww, BBGGMM

((RRoottaattee))

DDeelleettee,OOppttiioonn

, or

HHiiddee..

Press

FF GG

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Folder

ENTER

■

Use button to select the previous or next photo.

■

Use button to select and control the menu on the full-sized screen.

ENTER

SS iiddeesshhooww

: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show.

■

Set the time interval of the slide show in

OOppttiioonn

■

A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode.

BBGGMM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

OOppttiioonn

((RRoottaattee))

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

DDeelleettee

: Delete photos.

OOppttiioonn

: Set values for

SS lliiddee SSppeeeedd

and

MMuussiicc

FFoo llddeerr

■

Use button and

EENN TTEERR

button to set values.

Then go to and press

EENN TTEERR

to save the set-

tings.

■

You cannot change

MMuussiicc FFoollddeerr

while BGM is

playing.

HHiiddee

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press EENN TTEERR

button to display.

NOTE

This TV will not be able to decode most JPEG images saved using the Progressive option.

Page 71

MUSIC LIST

USB

You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.

Screen Components

Supported music file: *.MP3

Bit rate range 40Kbps ~ 320Kbps

• Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz

Moves to upper level file Preview: If any album jacket

for the file exists, this jacket is displayed.

Current page/Total pages Total number of marked

musics Usable USB memory Corresponding buttons on

the remote control

Select

UUSSBB

Select

MMUUSSIICC LLIISSTT

ENTER

USB Device

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Title Play Time

Upper

Good Bye

Arirang 04:12

05:30

3 4

Navigate PopUp Menu Move Page Mark Exit

FAV

RETURN

Page 1/1

No Marked

Drive1

Arirang

Page 72

USB

Music Selection and Popup Menu

■

Use the

CC HH

button to navigation in

the music page.

■

Use

FFAAVV

button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play.

Up to 6 music titles are listed per page.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

ENTER

RETURN

Return to TV viewing

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

USB Device

Page 1/1

No Marked

MUSIC LIST

Upper

Free Space 150MB

3945 KB, 128 Kbps

Drive1

Arirang

Navigate Move Page Mark Exit

FAV

RETURN

PopUp Menu

Play TimeTitle

Upper

Good Bye

Arirang

05:30

04:12

3945 KB 128 Kbps

Play

Play with Photo

Mark All

Delete

Cancel

PP llaayy

(During stop): Play the selected music.

Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the

EENN TTEERR

button, the current

music in playback will stop.

PP llaayy MMaarrkkeedd

: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically.

SS ttoopp PPllaayy

(During playback): Stop the play-

ing musics.

PP llaayy wwiitthh PPhhoottoo

: Start playing the selected

musics and then move to the Photo List.

MMaarrkk AAllll

: Mark all musics in the folder.

UUnnmmaarrkk AA llll

: Deselect all marked music.

DDeelleettee

: Delete the selected music.

CCaa nncc ee ll

: Close the pop-up menu.

Page 73

USB

■

The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time.

NOTE

When music is playing, is displayed in front of the music play time.

A damaged or corrupted music file that does not play displays 00:00 as the play time.

Music files with copy-protection will not play.

Press

EENN TTEERR

, AA, or

RREETTUURRNN

button to stop the screen saver.

This TV can not play music files less than 16 Kbytes.

Page 74

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE

If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible.

This phenomenon is common to all manufacturers and is not covered by warranty. Although, after watching video that did not fill the screen, any after-image from the black bars will normally dissipate after a few minutes.

■

You can also adjust

AAss ppeecctt RRaattiioo

the

QQ --MMeennuu

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Set By Program

4:3

16:9

Zoom1

Zoom2

Just Scan

Select

PP IICCTTUURREE

Select

AAss ppeecctt RRaattiioo

Select the desired picture format.

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Page 75

PICTURE CONTROL

Set by program

Selects the proper picture proportion to match the source’s image.

4:3

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.

16:9

Adjust the picture horizontally, in a linear proportion to fill the entire screen.

Zoom 1

Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

Zoom 2

Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage.

Just Scan

Following selection will lead to you view the picture of best quality without loss of original picture in high resolution image.

Notes: If there are noise in original picture, you can see the noise at the edge.

JJuusstt SSccaann

operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p) input source.

(4:3 4:3)

(16:9 16:9)

Page 76

PICTURE CONTROL

PRESET PICTURE SETTINGS

PICTURE CONTROL

Picture Mode - Preset

There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor.

Enter

Move

PICTURE

Select

PP IICCTTUURREE

Select

PP iiccttuurree MMooddee

Select

IInntteelllliiggeenntt SSeennssoorr

(Except

32/37/42LG30, Plasma TV),

VViivviidd

, SSttaannddaarrdd, CCiinneemmaa// CCiinneemmaa (Only for 50/60PG60) ,

SSppoorrtt

, or

GGaammee

■

When selecting

IInntteelllliiggeenntt SSeennssoorr (Except 32/37/42LG30, Plasma TV), the most suitable picture is automatically

adjusted according to the surrounding conditions.

■

VVii vvii dd, SS ttaa nnddaarrdd, CC iinn eemm aa// CCiinneemmaa, SSppoorrtt

, and

GGaammee

Settings are preset for the optimum picture quality at the factory and are not adjustable.

■

You can also adjust

PP iiccttuurree MMooddee

the

QQ.. MMeennuu

ENTER

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Intelligent Sensor

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

Vivid

Standard

Cinema

Sport

Game

Expert1

Expert2

RETURN

Return to the previous menu.

Return to TV viewing.

32/37/42LG30, 42/50PG25

50/60PG6037/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70,

Page 77

PICTURE CONTROL

Color Tone - Preset

Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.

Enter

Move

PICTURE

Select

PP IICCTTUURREE

Select

CCoo lloorr TTeemmppeerraattuurree

ENTER

Select

CCooooll, MMeeddiiuumm

, or

WWaarrmm

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Select

AAddvv aanncceedd CCoonn ttrrooll

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Page 78

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT

PICTURE CONTROL

Picture Mode - User Mode

Adjust the picture appearance to suit your preference and viewing situations. LCD TV only: This feature is disable in “

PP iicctt uurree MMooddee--IInn ttee ll lliiggeenn tt SSeennssoorr

”.

50/60PG60 only: This feature is disable in “

PP iicctt uurr ee MMooddee-- CCiinn eemmaa

”.

Enter

Move

PICTURE

Select

PP IICCTTUURREE

Make appropriate adjustments.

Select

BBaacckkll iigghhtt

(Only LCD TV),

CCoonnttrraasstt

BBrriigghh ttnneessss, SS hhaarrppnneessss, CCoolloo rr

, or

TTiinntt

Select

PP iiccttuurree MMooddee

ENTER

Select

VViivviidd,SSttaannddaarrdd, CCiinneemmaa, SSppoorrtt

, or

GGaammee

ENTER

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Backlight 80

Enter

RETURN

Return to the previous menu.

Return to TV viewing.

Page 79

PICTURE CONTROL

Select your desired menu option.

Select

PP IICCTTUURREE

Select

PP iiccttuurree MMooddee

Select

EExxppeerrtt CCoonnttrrooll

Select

EExx ppeerrtt11

EExx ppeerrtt22

ENTER

Make appropriate adjustments.

Picture Mode - Expert Control

By segmenting categories,

EExxppeerr tt11

and

EExxppeerr tt22

provide more categories which users can set as they see

fit, offering the optimal picture quality for users.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 80

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

Sport

Game

Expert1

Expert2

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Expert Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Off

Fresh Contrast

Noise Reduction

Off

Gamma

Medium

Black Level

Off

Real Cinema

Color Standard

White Balance

Normal

• Method

2 Points

• Red Contrast

• Green Contrast

• Blue Contrast

Page 80

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTROL

Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.

Select

PP IICCTTUURREE

Select

AAddvv aanncceedd CCoonn ttrrooll

Select

FFrreesshh CCoonntt rraasstt, FFrreesshh CCoolloorr

NNooiissee RReedduuccttiioonn

, or

GGaammmmaa

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Select your desired options.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Page 81

PICTURE CONTROL

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.

Select

PP IICCTTUURREE

Select

AAddvv aanncceedd CCoonn ttrrooll

Select

BBllaa cckk LLeevveell

ENTER

Select

LL ooww

HHii gghh

■

LL ooww

: The reflection of the screen gets

darker.

■

HHii gghh

: The reflection of the screen gets

brighter.

■

AAuuttoo

: Realizing the black level of the screen and set it to High or Low automatically.

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Auto

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Page 82

PICTURE CONTROL

ADVANCED CONTROL - EYE CARE

LCD TV Only

PICTURE CONTROL

Dims extremely bright pictures. This feature is disable in “

PP iicctt uurree MM oo ddee --VViivv ii dd, CCii nneemm aa

”.

Select

PP IICCTTUURREE

Select

AAddvv aanncceedd CCoonn ttrrooll

Select

EEyyee CCaarree

ENTER

Select

OO nn

OOffff

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Auto

TruMotion

High

Page 83

PICTURE CONTROL

ADVANCED CONTROL - REAL CINEMA / FILM MODE

Set up the TV for the best picture appearance for viewing movies. When you operate Real Cinema/Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will

adjust 24 fps video from movies to 30 fps video for display.

■

Plasma TV, 32/37/42LG30 This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,

and HDMI 1080i mode.

■

37/42/47/52LG50 This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i,

and HDMI 1080i mode. This TV ouputs 48Hz in DTV, Component, and HDMI 1080p (24Hz).

■

32/37/42/47/52LG60, 32/42/47/52LG70 This function works with all inputs except PC mode.

Select

PP IICCTTUURREE

Select

AAddvv aanncceedd CCoonn ttrrooll

Select

RReeaall CCiinneemmaa

FFiillmm

MMooddee

ENTER

Select

OO nn

OOffff

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Film Mode

Off

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

For Plasma TV

For LCD TV

Real Cinema

On On

TruMotion

Off

Screen

5:5 Pull-Down 3:2 Pull-Down

Page 84

PICTURE CONTROL

ADVANCED CONTROL - TRUMOTION

Only 32/37/42/47/52LG60, 32/42/47/52LG70

PICTURE CONTROL

TruMotion provides even better quality for movies than 3:2 Pull-Down conversions. TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motion

in video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on the screen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpretations or double frames are needed).

TruMotion works with all inputs except PC mode.

Select

PP IICCTTUURREE

Select

AAddvv aanncceedd CCoonn ttrrooll

Select

TTrruuMMoottiioonn

ENTER

■

HHiigghh

: Provides smoother picture movement.

■

LL ooww

: Provides smooth picture movement.

Use this setting for standard use.

■

OOffff

: Use this setting when “High”and

“Low” setting result in noise.

■

If you enable "TruMotion", noise may appear on the screen.

If this occurs, set "TruMotion" to "Off".

Select

OOffff, LL ooww

, or

HHii gghh

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Color Temperature

Medium

Fresh Contrast

Off

Fresh Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

TruMotion

High

Page 85

PICTURE CONTROL

TRUMOTION DEMO

Only 32/37/42/47/52LG60, 32/42/47/52LG70

Select

PP IICCTTUURREE

Select

TTrruuMMoottiioonn DD eemmoo

Stop

TTrruuMMoottiioonn DD eemmoo

ENTER

Begin

TTrruuMMoottiioonn DD eemmoo

ENTER

TruMotion On

TruMotion Off

Use this feature to see the difference TruMotion makes. TruMotion works with all inputs except PC mode.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Page 86

PICTURE CONTROL

PICTURE RESET

PICTURE CONTROL

Settings of the selected picture modes return to the default factory settings.

Select

PP IICCTTUURREE

Select

RReesseett

Initialize the adjusted value.

ENTER

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Enter

Move

PICTURE

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

• Advanced Control

• Reset

Screen (RGB-PC)

TruMotion Demo

Resetting video configuration...

Page 87

PICTURE CONTROL

POWER INDICATOR

LCD TV Only

Select

OOPPTTIIOONN

Select

PP oowweerr IInnddiiccaattoorr

ENTER

Select

SS rr aarrttuupp SSoo uu nndd,SS ttaanndd bbyy

LL iigg hhtt,PP oowweerr LLiigghhtt orDDeemmoo MMooddee

ENTER

Select your desired options.

RETURN

Return to the previous menu.

Return to TV viewing.

■

SS ttaarrttuupp SSoouunndd

: You can turn off the starting sound of the TV or set the volume.

■

SS ttaannddbbyy LLiigghhtt

: You can set the brightness of the LED on the front side of the TV during power standby.

■

PP oowweerr LLiigghhtt

: You can set the the LED on the front side of the TV to be turned on or off while watching the TV.

■

DDeemmoo MMooddee

: You can set the LED on

the front side of the TV to flash.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

Set ID : 1

Power Indicator

Initial Setting : Home

Standby Light

Demo Mode

Off

Srartup Sound

Off

Low

Power Light

Only for 32/37/42/47/52LG60

Page 88

PICTURE CONTROL

IMAGE STICKING MINIMIZATION (ISM) METHOD

Plasma TV Only

PICTURE CONTROL

A frozen still picture from a PC/video game displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.

An excessive ghosted image may be impossible to

clear entirely with White Wash. To return to normal viewing, press the any button.

NOTE

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Normal

Orbiter

Inversion

White Wash

■

NNoorrmmaa ll

: If image sticking is never a problem, ISM is not necessary - set to Normal.

■

OOrrbbii ttee rr

: Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 minutes.

■

IInnvveerrssiioo nn

: Inversion will automatically invert the plasma display panel color every 30 minutes.

■

WWhh iitt ee WWaasshh

: White Wash removes ghost images from the screen. Use sparingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own.

Select

OOPPTTIIOONN

Select

IISS MM MMeetthhoodd

ENTER

Select

NNoorrmmaall ,, OO rrbb iitteerr,,

IInnvveerrss iioonn

WWhhiittee WWaasshh..

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Page 89

PICTURE CONTROL

POWER SAVING PICTURE MODE

Plasma TV Only

It reduces the plasma display’s power consumption.

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Level 0

Level 1

Level 2

Level 3

Level 4

■

Level 0 is the brightest.

■

Level 0 > Level 1 > Level 2 > Level 3 > Level 4

■

You can also adjust

PP oowweerr SS aavviinngg

the

QQ.. MMeennuu

Select

OOPPTTIIOONN

Select

PP oowweerr SSaavviinngg

ENTER

Select

LLeevveell 00, LLeevveell 11

LLeevveell 22, LLeevveell 33

, or

LLeevveell 44

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Page 90

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.

Select

AAUUDDIIOO

Select

AAuu ttoo VV oolluummee

Select

OO nn

OOffff

Enter

Move

AUDIO

Enter

Move

AUDIO

ENTER

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : On

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Off

RETURN

Return to the previous menu.

Return to TV viewing.

Page 91

SOUND & LANGUAGE CONTROL

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content.

SS ttaanndd aarrdd, MM uussiicc, CCii nneemm aa, SS pp oorrtt

, and

GGaammee

are preset for optimum sound quality at the factory and are

not adjustable.

Select

AAUUDDIIOO

Select

SS oouunndd MMooddee

Select

SS ttaannddaarrdd, MMuussiicc

CCiinneemmaa, SS ppoorrtt

, or

GGaammee

ENTER

Enter

Move

AUDIO

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Standard

Music

Cinema

Sport

Game

■

You can also adjust

SS oouunndd MMooddee

the

QQ.. MMeennuu

RETURN

Return to the previous menu.

Return to TV viewing.

Page 92

SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT - USER MODE

SRS TRUSURROUND XT

Adjust the sound to suit your taste and room situations.

Select

AAUUDDIIOO

Select

SS oouunndd MMooddee

Select

TTrreebbll ee

BBaass ss

ENTER

Select

SS ttaannddaarrdd, MMuussiicc

CCiinneemmaa, SS ppoorrtt

, or

GGaammee

ENTER

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Select

AAUUDDIIOO

Select

SS RRSS TTrruuSSuurr rroouunndd XXTT

Select

OO nn

OOffff

ENTER

■

SSRRSS TTrruuSSuurrrroouunndd XXTT

: Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.

RETURN

Return to the previous menu.

Return to TV viewing.

RETURN

Return to the previous menu.

Return to TV viewing.

Treble 50

Bass 50

SRS TruSurround XT

Off

Make appropriate adjustments.

ENTER

Page 93

SOUND & LANGUAGE CONTROL

CLEAR VOICE

By differentiating the human sound range from others, it improves the sound quality of voices.

■

If you select “

CCllee aarr VVoo iiccee--OOnn

”,

SS RRSS

TTrruuSSuurrrroo uu nndd XX TT

feature will not

work.

■

You can also adjust

CCllee aarr VVoo iiccee

in the

QQ --MMeennuu

Enter

Move

AUDIO

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Off

Select

AAUUDDIIOO

Select

CCllee aarr VV ooiiccee

Select

OO nn

OOffff

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Page 94

SOUND & LANGUAGE CONTROL

BALANCE

SOUND & LANGUAGE CONTROL

Select

AAUUDDIIOO

Select

BBaall aannccee

Make appropriate adjustments.

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

Enter

Move

AUDIO

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Balance 0

RETURN

Return to the previous menu.

Return to TV viewing.

Page 95

SOUND & LANGUAGE CONTROL

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

Enter

Move

AUDIO

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Select

AAUUDDIIOO

Select

TTVV SSppeeaakkeerr

Select

OO nn

OOffff

ENTER

RETURN

Return to the previous menu.

Return to TV viewing.

Enter

Move

AUDIO

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Off

Page 96

SOUND & LANGUAGE CONTROL

AUDIO RESET

SOUND & LANGUAGE CONTROL

Settings of the selected Sound Mode return to the default factory settings.

Select

AAUUDDIIOO

Select

RReesseett

ENTER

Initialize the adjusted value.

ENTER

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Resetting audio configuration...

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice : On

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

Page 97

SOUND & LANGUAGE CONTROL

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono.

Q.Menu

16:9

Vivid

Off

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Backlight

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

Select

SS AA PP

Select

MMoonn oo, SS tteerreeoo

, or

SS AA PP

Return to TV viewing.

Q. MENU

Select

MMuullttii AAuuddiioo

Select other languages.

Return to TV viewing.

Q. MENU

Analog TV Digital TV

Q.Menu

16:9

Vivid

Off

Standard

Off

English

Off

Add

Eject

Aspect Ratio

Power Saving

Clear Voice

Picture Mode

Sound Mode

Caption

Multi Audio

Sleep Timer

Del/Add/Fav

USB Eject

LCD TVPlasma TV

Page 98

SOUND & LANGUAGE CONTROL

AUDIO LANGUAGE

SOUND & LANGUAGE CONTROL

Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode.

Select

OOPPTTIIOONN

Select

LLaann gguuaaggee

Select

AAuuddii oo

ENTER

Select your desired language: EEnngglliisshh, SS ppaann iisshh

, or

FFrreenncchh

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

English

Audio

English

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

RETURN

Return to the previous menu.

Return to TV viewing.

Page 99

SOUND & LANGUAGE CONTROL

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select

OOPPTTIIOONN

Select

LLaann gguuaaggee

Select

MMee nnuu

ENTER

Select your desired language. From this point on, the on-screen menus

will be shown in the selected language.

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

English

Audio

English

RETURN

Return to the previous menu.

Return to TV viewing.

Page 100

SOUND & LANGUAGE CONTROL

CAPTION MODE

SOUND & LANGUAGE CONTROL

Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when

CCaapp ttiioonn

Mode is set

OO nn

Select

OOPPTTIIOONN

Select

CCaa ppttiioonn

Select

OO nn

ENTER

Select

CC CC11-44

TTeexx tt11-44

Enter

Move

OPTION

Enter

Move

OPTION

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : Off

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Caption : CC1

ISM Method : Normal

Power Saving : Level 0

Set ID : 1

Mode

CC1

Digital Option

Analog Broadcasting System Captions

■

When selecting

OOffff

, Sub-menus for Analog, DTV, and Digital Option become disabled.

■

CCAAPPTTIIOONN The term for the words that scroll

across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.

■

TTEEXXTT The term for the words that appear in a

large black frame and almost cover the entire screen; usually messages provided by the broadcaster.

E E

RETURN

Return to the previous menu.

Return to TV viewing.

LG 50PG25, 50PG60, 4270, 4760, 4770 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

WARNING / CAUTION

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

CONTENTS

FEATURE OF THIS TV

PREPARATION

ACCESSORIES

FRONT PANEL INFORMATION

BACK PANEL INFORMATION

STAND INSTALLATION

CABLE MANAGEMENT

DESKTOP PEDESTAL INSTALLATION

SWIVEL STAND

ATTACHING THE TV TO A DESK (Only 32LG30/70)

VESA WALL MOUNTING

PROTECTION COVER

SECURING THE TV TO THE WALL TO PREVENT FALLING

ANTENNA OR CABLE CONNECTION

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

Component Connection

HDMI Connection

DVI to HDMI Connection

DVD SETUP

Component Connection

HDMI Connection

VCR SETUP

Antenna Connection

Composite (RCA) Connection

S-Video Connection (Except 32/37/42/47/52LG60)

OTHER A/V SOURCE SETUP

PC SETUP

VGA (D-Sub 15 pin) Connection

DVI to HDMI Connection

Screen Setup for PC mode

AUDIO OUT CONNECTION

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

Installing Batteries

TURNING ON THE TV

VOLUME ADJUSTMENT

CHANNEL SELECTION

QUICK MENU

INITIAL SETTING

ON-SCREEN MENUS SELECTION

CHANNEL SETUP

Auto Scan (Auto Tuning)

Add/Delete Channel (Manual Tuning)

Channel Editing

INPUT LIST

INPUT LABEL

AV MODE

SIMPLINK : On

SIMPLINK Menu

SIMPLINK Functions

ENTRY MODES

PHOTO LIST

MUSIC LIST

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

PRESET PICTURE SETTINGS

Picture Mode - Preset

Color Tone - Preset

MANUAL PICTURE ADJUSTMENT

Picture Mode - User Mode

Picture Mode - Expert Control

PICTURE IMPROVEMENT TECHNOLOGY

ADVANCED CONTROL - BLACK (DARKNESS) LEVEL

ADVANCED CONTROL - REAL CINEMA / FILM MODE

PICTURE RESET

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

PRESET SOUND SETTINGS (SOUND MODE)

SOUND SETTING ADJUSTMENT - USER MODE

CLEAR VOICE

BALANCE

S-Video Connection

(Except 32/37/42/47/52LG60)