LG 40445 Owner’s Manual

Front-Loading Automatic Washer

Use & Care Guide

Lavadora automática de carga frontal

Manual de uso y cuidado

Laveuse automatique à chargement frontal

Guide d’utilisation et d’entretien

Models/Modelos/Modèles 796.4044#

# = color number, número de color, numéro de couleur

Designed to use only HE
High Efficiency detergent

Diseñado para utilizar solamente
detergente de alta eficacia

Conçu pour l'utilisation d'un détergent
haute efficacité seulement

ENGLISH

ESPAÑOL

FRANÇAIS

Protocol P172
Sanitization Performance of Residential
and Commercial, Family Sized Clothes
Washers

Protocolo P172
Ejecucion de Saneamiento en la zona
residencial y comercial, lavodoras del uso
del hogar

Protocole P172
Performance en matière de désinfection
des laveuses résidentielles et
commerciales de grande taille

MFL62526816

Sears Brands Management Corporation, Hoffman Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8

www.sears.com
www.sears.ca

TABLE OF CONTENTS

PROTECTION AGREEMENTS

SAFETY MESSAGES ...........................................................................3

IMPORTANT SAFETY INSTRUCTIONS ...........................................3-5

GROUNDING REQUIREMENTS...........................................................5

FEATURES AND BENEFITS

Key Parts and Components................................................................6

Included Accessories..........................................................................6

Optional Accessories ..........................................................................6

INSTALLATION REQUIREMENTS

Key Dimensions and Specifications....................................................7

Choose the Proper Location ...............................................................7

Flooring...............................................................................................7

Clearances..........................................................................................7

INSTALLATION INSTRUCTIONS

Unpacking and Removing Shipping Bolts...........................................8

Connecting the Water Lines................................................................9

Connecting the Drain Hose...............................................................10

Connect to the Power Supply ...........................................................10

Leveling the Washer .........................................................................11

Installation of non-skid pads (optional) .............................................11

HOW TO USE

ENGLISH

Control Panel Features.....................................................................12

Operating the Washer.......................................................................13

Cycle Guide ......................................................................................14

Sorting Wash Loads..........................................................................15

About the Dispenser .........................................................................16

Detergent and Dispenser Use...........................................................17

Time and Status Display...................................................................18

Cycle Modifier Buttons......................................................................19

Steam Cycles and Options ...............................................................20

ADD STEAM Option ......................................................................20

Using the STEAM REFRESH Cycle ..............................................20

Cycle Option Buttons ........................................................................21

DELAY START ..............................................................................21

2ndRINSE.......................................................................................21

STAIN TREAT................................................................................21

Special Functions..............................................................................21

CONTROL LOCK...........................................................................21

CLEAN WASHER ..........................................................................21

CARE AND CLEANING

Regular Cleaning.........................................................................22-23

Cleaning the Exterior .....................................................................22

Care and Cleaning of the Interior...................................................22

Door Seal and Glass Cleaning.......................................................22

Removing Mineral Buildup.............................................................22

Storing the Washer ........................................................................22

Cleaning the Dispenser..................................................................23

Maintenance ................................................................................24-25

Cleaning the Water Inlet Filters......................................................24

Cleaning the Drain Pump Filter......................................................25

TROUBLESHOOTING GUIDE

Normal Sounds You May Hear .........................................................26

Before Calling for Service............................................................26-29

WARRANTY........................................................................................30

PRODUCT RECORD

In the space below, record the date of purchase, model,
and serial number of your product. You will find the model
and serial number printed on an identification plate
located inside the washer door. Have these items of
information available whenever you contact Sears
concerning your product.

Model No.
Date of Purchase
Serial No.

Save these instructions and your sales receipt for future
reference.

Master Protection Agreements

Congratulations on making a smart purchase. Your new
Kenmore

®

product is designed and manufactured for
years of dependable operation. But like all products, it
may require preventive maintenance or repair from time
to time. That's when having a Master Protection
Agreement can save your money and aggravation.

The Master Protection Agreement also helps extend the
life of your new product. Here's what the Agreement*
includes:

• Parts and labor needed to help keep products

operating properly under normal use, not just defects.
Our coverage goes well beyond the product
warranty. No deductible, no functional failure excluded
from coverage – real protection.

• Expert service by a force of more than 10,000

authorized Sears service technicians, which means
someone you can trust will be working on your product.

• Unlimited service calls and nationwide service, as

often as you want us, whenever you want us.

• "No-lemon" guarantee – replacement of your covered

product if four or more product failures occur within
twelve months.

• Product replacement if your covered product can't be

fixed.

• Annual Preventive Maintenance Check at your

request – no extra charge.

• Fast help by phone – we call it Rapid Resolution.

Phone support from a Sears representative on all
products. Think of us as a "talking owner's manual."

• Power surge protection against electrical damage due

to power fluctuations.

• $250 food loss protection annually for any food

spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.

• Rental reimbursement if repair of your covered product

takes longer than promised.

• 10% discount off the regular price of any non-covered

repair service and related installed parts

Once you purchase the Agreement, a simple phone call
is all that it takes for you to schedule service. You can call
anytime day or night or schedule a service appointment
online.

The Master Protection Agreement is a risk-free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund, or a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!

Some limitations and exclusions apply.
For prices and additional information in the U.S.A.
call 1-800-827-6655.

*Coverage in Canada varies on some items.
For full details call Sears Canada at 1-800-361-6665.

Sears Installation Service

For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call
1-800-4-MY-HOME

®

.

2

SAFETY MESSAGES

We have provided many important safety messages in this manual and on your appliance. Always read and obey
all safety messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can result in property damage and/or serious bodily

harm or death.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

DANGER

WARNING

Failure to follow these safety instructions may result in property damage and/or
serious bodily harm or death.

Failure to follow these safety instructions may result in property damage and/or
serious bodily harm or death.

All safety messages will tell you what the potential hazard is, tell you how to reduce
the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to
persons when using this appliance, follow basic
precautions, including the following.

• Before use, the washer must be properly installed as
described in this manual.

• Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline, dry
cleaning solvents, or other flammable or explosive
substances, as they give off vapors that could ignite or
explode.

• Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.

• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for such a
period, before using the washer, turn ON all hot water
faucets and let the water flow from each for several
minutes. This will release any accumulated hydrogen
gas. As the gas is flammable, do not smoke or use an
open flame during this time.

• Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is
used near children.

• Before the washer is removed from service or
discarded, remove the door to prevent children from
climbing inside.

ENGLISH

• Do not install or store the washer where it will be
exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or
attempt any servicing other than as described in this
manual. We strongly recommend that any service be
performed by a qualified individual.

• See Installation Instructions for grounding requirements.

• ALWAYS follow the fabric care instructions supplied by
the garment manufacturer.

• Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a load
to catch fire.

• Use fabric softeners or products to eliminate static only
as recommended by the manufacturer.

• This washer is not designed for maritime use or for
mobile installations such as in RVs, aircraft, etc.

• Turn OFF the water taps and unplug the washer if the
machine is to be left tor an extended period of time,
such as during vacations.

• Packaging material can be dangerous for children.
There is a risk of suffocation! Keep all packaging from
children.

• Always check the inside of the washer for foreign
objects before loading laundry. Keep the door closed
when not in use.

3

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electric shock, or injury to
persons when using this appliance, follow basic
precautions, including the following.

• Unplug the washer before cleaning to avoid the risk of

electric shock.

• Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer. They will damage the finish.

• Do not put oily or greasy rags or clothing on top of the
washer. These substances give off vapors that could ignite

the materials.

• Do not wash items that are soiled with vegetable or
cooking oil. These items may contain some oil after

laundering and may catch fire.

• Disconnect this appliance from the power supply

ENGLISH

before attempting any user maintenance. Turning the
controls to the OFF position does not disconnect this

• Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures. Installation instructions are packed

in the washer for installer's reference. If the washer is
moved to a new location, have it checked and reinstalled by
a qualified service person. Failure to follow this warning can
cause serious injury, fire, electrical shock, or death.

• Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord. Failure to

follow this warning can cause serious injury, fire, electrical
shock, or death.

• For personal safety, this appliance must be properly
grounded. Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• The power cord of this appliance is equipped with a 3­prong (grounding) plug which mates with a standard 3­prong (grounding) wall outlet to minimize the possibility

of electric shock hazard from this appliance.

• This washer must be plugged into a 120VAC, 60Hz
grounded outlet. Failure to follow this warning can cause

serious injury, fire, electrical shock, or death.

• Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded. Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.

Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.

• Do not install on carpet. Install washer on a solid floor.

Failure to follow this warning can cause serious leak
damage.

• Do not remove grounding prong. Do not use an
adapter or extension cord. Plug into a grounded 3­prong outlet. Failure to follow these warnings can cause

serious injury, fire, electrical shock, or death.

appliance from the power supply. Failure to follow this
warning can cause serious injury, fire, electrical shock, or
death.

• Do not combine detergents, fabric softeners, and other
laundry products from different manufacturers for use
in one load unless specified on the label.

• Do not mix chlorine bleach with ammonia or acids
such as vinegar. Follow package directions when
using laundry products. Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

• Do not reach into the washer while parts are moving.
Before loading, unloading, or adding items, push in the
cycle selector knob and allow the drum to coast to a
complete stop before reaching inside.

Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.

WARNING

• The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best

performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated
wires.

• Never unplug your washer by pulling on the power
cord. Always grip plug firmly and pull straight out from the

outlet. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.

• Immediately repair or replace all power cords that have
become frayed or otherwise damaged. Do not use a
cord that shows cracks or abrasion damage along its
length or at either end. Consult with a qualified service

person. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.

• When installing or moving the washer, be careful not
to pinch, crush, or damage the power cord. Failure to

follow this warning can cause serious injury, fire, electrical
shock, or death.

• The washer must be installed and electrically
grounded by a qualified service person in accordance
with local codes to prevent shock hazard and assure

stability during operation.

• Washer is heavy. Two or more people may be needed
to install and move the appliance. Failure to do so can

result in back or other injury.

• Store and install the washer where it will not be
exposed to temperatures below freezing or exposed to
outdoor weather conditions. Failure to follow this

warning can cause serious leak damage.

• To reduce the risk of electric shock, do not install the
washer in humid spaces. Failure to follow this warning

can cause serious injury, fire, electrical shock, or death.

4

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

• Do not allow children to play on or in the washer.
Close supervision of children is necessary when the
washer is used near children. As children grow,
teach them the proper, safe use of all appliances.

Failure to comply with these warnings could result in
serious personal injuries.

• Destroy the carton, plastic bag, and other packing
materials after the washer is unpacked. Children
might use them for play. Cartons covered with rugs,
bedspreads, or plastic sheets can become airtight
chambers. Failure to comply with these warnings could

result in serious personal injuries.

GROUNDING REQUIREMENTS

IMPORTANT: Please read carefully.
TO CONNECT ELECTRICITY

WARNING

Improper connection of the equipment-grounding
conductor can result in risk of electric shock. Check
with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly
grounded. Do not modify the plug provided with the
appliance. If it does not fit the outlet, have a proper
outlet installed by a qualified electrician. Failure to
follow these warnings can cause serious injury, fire,
electrical shock, or death.

RISK TO CHILDREN

• Keep laundry products out of children's reach. To
prevent personal injury, observe all warnings on
product labels. Failure to comply with these warnings

could result in serious personal injuries.

• Remove the door to the washing compartment to
avoid the danger of children or small animals
getting trapped inside before your washer is
removed from service or discarded. Failure to do so

can result in serious personal injury or death.

ENGLISH

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a cord
having an equipment-grounding conductor and grounding
plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with
all local codes and ordinances.

3-prong
grounding
plug

3-prong
grounding type
wall receptacle

Ensure proper
ground exists
before use.

5

DETERGENT DISPENSER

A

There are four compartments, one each for prewash (not
used on this model) main wash, liquid bleach, and liquid
fabric softener.

CONTROL PANEL WITH LED DISPLAY

B

The easy-to-read LED display shows cycle options, settings,
cycle status, and estimated time remaining during operation.

NOTE: Sensors in the washer automatically detect the size
of the wash load to optimize washing time, based on the
selected cycle and options.

DIRECT-DRIVE MOTOR

C

The direct-drive motor provides improved performance
and reliability while increasing energy efficiency.

ENGLISH

(Motor is not visible.)

LARGE-CAPACITY STAINLESS STEEL DRUM

D

The ultra-large stainless steel drum offers extreme
durability and is tilted to improve efficiency and allow
easier access for large items.

EASY-ACCESS LOCKING DOOR

E

The extra-large door locks during operation and has a
delay feature to prevent the door from being opened until
it is safe to do so.

FEATURES AND BENEFITS

KEY PARTS AND COMPONENTS

Hot and Cold

Water Inlets

Power
Cord

FILTER ACCESS PANEL

F

Provides easy access to the drain pump filter, which
allows you to clean the filter or retrieve lost items without
a service call.

LEVELING FEET

G

Four leveling feet (two in the front and two in the back)
adjust to improve washer stability on uneven floors. Feet
are adjusted and locked in place using the adjusting
wrench included with the washer.

HIGH-EFFICIENCY STEAM CYCLES

H

During high-efficiency STEAM cycles, the steam nozzle
injects fabrics with hot steam to gently remove tough
stains.

Included Accessories

Hot and Cold
Water Hoses

Non-skid pads

Caps (4)

(for covering

shipping bolt holes)

Drain
Hose

Shipping Bolts/Retainers (4)
NOTE: Bolts/retainers MUST be removed prior
to operation. Keep for future use. See page 8.

Optional Accessories

Drain Hose Extension

Rear of Washer

Stacking kit (For dryer)

Wrench (for removing

shipping bolts and

adjusting and

locking leveling feet)

Tie Strap

(for securing

drain hose

Elbow Bracket

(for securing

drain hose

P/N 5215ER2002K D26 17002 (White)

D26 17008 (Ginger)
D26 17009 (Chili Pepper)

Canada only
D26 18992 (Titanium)

6

INSTALLATION REQUIREMENTS

KEY

DIMENSIONS AND SPECIFICATIONS

Description Front-Loading Washer
Rated Voltage/Frequency 120VAC, 60Hz
Dimensions 27" (W) X 293/4" (D) X 3811/16" (H), 511/8" (D, door open)

68.6 cm (W) X 75.6 cm(D) X 98.3 cm(H), 129.8 cm (D, door open)

Net Weight 190.7 lb. (86.5 kg)

CHOOSE THE PROPER LOCATION

WARNING

• Washer is heavy! Two or more people are required
when moving and unpacking the washer. Failure to do so

may result in damage to property or serious bodily harm.

• Store and install the washer where it will not be
exposed to temperatures below freezing or exposed to
outdoor weather conditions. Failure to follow this warning

can cause serious injury, fire, electrical shock, or death.

• Properly ground washer to conform with all governing
codes and ordinances. Failure to follow this warning can

cause serious injury, fire, electrical shock, or death.

• To reduce the risk of electric shock, do not install the
washer in humid spaces. Failure to follow this warning can

cause serious injury, fire, electrical shock, or death.

• The base opening must not be obstructed by carpeting
when the washer is installed on a carpeted floor.

• Do not remove ground prong. Do not use an adapter or
extension cord. Plug into a grounded 3-prong outlet.

Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of either side
of the washer.

• The appliance and outlet must be positioned so that the
plug is easily accessible.

• Do not overload the outlet with more than one appliance.

• The outlet must be grounded in accordance with current
wiring codes and regulations.

• Time-delay fuse or circuit breaker is recommended.

NOTE: It is the personal responsibility and obligation of the
product owner to have a proper outlet installed by a qualified
service person.

CLEARANCES

211/3"

(54.2 cm)

3

/4"

29

(75.6 cm)

1

51

/

8"

(129.8 cm)

To ensure sufficient clearance for water lines and airflow,
allow minimum clearances of at least 1 in. (2.5 cm) at the
sides and 4 in. (10 cm) behind the unit. Be sure to allow for
wall, door, or floor moldings that may increase the required
clearances.

1"

(2.5 cm)

27"

(68.6 cm)

1"
(2.5 cm)

4"
(10 cm)

ENGLISH

FLOORING

• To minimize noise and vibration, the washer MUST be
installed on a solidly constructed floor. See the NOTE at
right.

• Allowable slope under the entire washer is a maximum 1"
difference from side to side or from front to back.

• Carpeting and soft tile surfaces are not recommended.

• Never install the washer on a platform or weakly supported
structure.

Allow at least 211/4 in. (54 cm) in front of the washer to open
the door.

NOTE: Please note that the floor must be strong and rigid
enough to support the weight of the washer, when fully
loaded, without flexing or bouncing. If your floor has too
much flex in it, you may need to reinforce it to make it more
rigid. A floor that is adequate for a top-loading washer may
not be rigid enough for a front loading washer, due to the
difference in the spin speed and direction. If the floor is not
solid, your washer may vibrate and you may hear and feel
the vibration throughout your house.

7

INSTALLATION INSTRUCTIONS

UNPACKING AND REMOVING SHIPPING BOLTS

When removing the washer from the carton base, be sure to
remove the foam tub support in the middle of the carton
base. See drawing below.

If you must lay the washer down to remove the base
packaging materials, always protect the side of the washer
and lay it carefully on its side. DO NOT lay the washer on its
front or back.

To prevent internal damage during transport, the washer is
equipped with 4 shipping bolts and plastic retainers.

IMPORTANT:

• These shipping bolts and retainers MUST NOT be

removed until just before moving the washer into its final
position.

• These bolts and retainers MUST be removed before

operating the washer.

ENGLISH

• Failure to remove shipping bolts and retainers may cause
severe vibration and noise, which can lead to permanent
damage to the washer.

NOTE: The power cord is secured to the back of the washer
with a shipping bolt to help prevent operation with shipping
bolts in place.

Shipping
Bolts

Power
Cord

1. Starting with the bottom 2 shipping bolts, use the included

wrench to fully loosen all 4 shipping bolts by turning them
counterclockwise.

Foam Tub
Support

Carton
Base

Shipping
bolts

Hole Cap

2. Remove the bolt assemblies by wiggling them slightly

while pulling.

3. Locate the four hole caps included in the accessory pack

and install them in the shipping bolt holes.

NOTE: Save the bolt assemblies for future use. To prevent
damage to internal components, the bolt assemblies must
be installed when transporting the washer.

8

INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINES

• IMPORTANT: Use new hoses when installing the washer.

Do NOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses provided with this

laundry product. Aftermarket hoses are not guaranteed to
fit or function correctly. Other hoses may not tighten
correctly and could cause leaks. Subsequent damage to
product or property will not be covered under the terms of
the product warranty.

• Water supply pressure must be between 14.5 psi and 116

psi (100~800 kPa). If the water supply pressure is more
than 116 psi, a pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks, and wear,

and replace the hose if necessary.

• Make sure that the water lines are not stretched, pinched,

crushed, or kinked.

• The washer should never be installed or stored in a

location subject to freezing temperatures. Damage to the
water lines and internal mechanisms of the washer can
result. If the washer was exposed to freezing temperatures
prior to installation, allow it to stand at room temperature
for several hours before use and check for leaks prior to
operation.

Water Hose

(to water inlet

on washer)

Rubber Seal

For cold water

Water Inlets

For hot water

2. Attach the red, hot water line to the hot water inlet on the

back of the washer. Attach the blue, cold water line to the
cold water inlet on the back of the washer. Tighten the
fittings securely.

NOTE: Be careful not to cross-thread the hose fittings
since this will damage the valve and could result in
property damage from leaks.

Water Tap

ENGLISH

Rubber Seal

Water Hose
(to tap)

1. Inspect the threaded fitting on each hose and make sure

there is a rubber seal in place in both ends.

3. Connect the water supply hoses to the HOT and COLD

water faucets tightly by hand and then tighten another
2/3 turn with pliers. Turn ON the water faucets and check
for leaks.

9

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE

• The drain hose should always be properly secured.

Failure to properly secure the drain hose can result in
flooding and property damage.

• Do not install the end of the drain hose higher than 96 in.
(243.8 cm) above the bottom of the washer.

• The drain must be installed in accordance with any
applicable local codes and regulations.

• Make sure that the drain hose is not stretched, pinched,
crushed, or kinked.

NOTE:

A drain hose extension kit is
available if the drain hose is not
long enough. Do not extend
drain hose more than 6 feet, as
this will cause poor draining

ENGLISH

resulting in poor wash and spin
performance.

Drain Hose Extension

P/N 5215ER2002K

Option 1: Standpipe

Elbow Bracket

Option 2: Laundry Tub

Elbow Bracket

Laundry Tub

Tie Strap

Drain Hose

The elbow bracket should be installed near the end of the
drain hose. Hang the end of the drain hose over the side of
the laundry tub. Use tie strap to secure the drain hose in
place.

Option 3: Floor Drain

Tie
Strap

Drain Hose

Install the end of the drain hose into the elbow bracket. Do
not extend the drain hose more than 4 inches past the end
of the elbow bracket. Use tie strap to secure the drain hose
in place.

NOTE:

• Total height of the hose end should not exceed 96 in.
(243.8 cm) from the bottom of the washer.

• The drain hose should be inserted no more than 8–12
inches into the standpipe.

• Extending the drain hose more than 4 inches past the end
of the elbow bracket can cause mold or microorganisms to
spread to the inside of the washer.

Drain Hose

Floor Drain

Insert the end of the drain hose into the floor drain.

If possible, secure the hose to prevent it from moving or

coming out of the drain.

CONNECT TO THE POWER SUPPLY

Washer should be plugged into a 120-VAC, 60-Hz grounded
3-prong outlet.

Plug in the washer.

10

INSTALLATION INSTRUCTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high speeds.
To minimize vibration, noise, and unwanted movement,
the floor must be a level, solid surface.

NOTE: Adjust the leveling feet only as far as necessary to level
the washer. Extending the leveling feet more than necessary
can cause the washer to vibrate.

NOTE: Before installing the washer, make
sure the floor is clean, dry and free of dust,
dirt, water and oils so the washer feet can
not slide easily. Leveling feet that can move
or slide on the floor can contribute to excess
vibration and noise due to poor contact
with the floor. See INSTALLATION OF
NON-SKID PADS below for more
information.

NOTE: If a drip pan must be used, take extra care to follow the
instructions provided with the drip pan and make sure the
leveling feet are adjusted for firm and even contact with the
pan. Use of drip pans and failure to properly level the machine
may result in increased vibration and noise during operation.

• All four leveling feet must rest solidly on the floor. Attempt to
rock the washer from corner to corner to make sure that all
four leveling feet are in firm contact with the floor.

Level

Tighten all 4 lock nuts

securely using the

wrench.

3. Once the washer is level from side to side and front to

back, use the adjusting wrench to tighten all four lock nuts
securely to prevent the legs from getting out of
adjustment during operation.
Make sure that all 4 leveling feet are in firm contact with
the floor.

NOTE: To make sure that the washer is properly level, run
the washer with a test load: place a medium-sized load of
laundry in the machine. Then press POWER, select
EXPRESS WASH, and then press the START/PAUSE
button. See the following sections for additional information
on cycle selection and operation. Verify that the washer
does not rock or vibrate excessively during the spin cycle. If
the washer vibrates or shakes, adjust the leveling feet, while
the washer is spinning, until the vibrations are reduced to a
minimum.

ENGLISH

Leveling

Feet

Leveling Feet

1. Position the washer in the final location, taking special care

to not pinch, strain, or crush the water and drain lines. Place
a level across the top of the washer.

Raise

2. Loosen the locknuts on all 4 leveling feet with the wrench

until you can adjust the feet. Use the wrench to turn the feet
clockwise to raise the washer and counterclockwise to lower
the washer. Using a level, adjust the feet until the washer is
level from side to side and front to back. Make sure all 4 feet
are in firm contact with the floor.

NOTE: If you are installing the washer on the optional pedestal,
the washer leveling feet should be fully retracted. Use the
leveling feet on the pedestal to level the washer.

Lower

INSTALLATION OF NON-SKID PADS
(optional)

Some floor surfaces are too slippery to prevent the washer
from moving on the floor during heavily unbalanced loads.
While it is normal for an occasional load to be out of
balance, excess noise and vibration can result from the
washer moving out of position. If these conditions are
encountered, follow the instructions below for installation of
the non-skid pads. These pads will help prevent the washer
from moving during heavy out of balance conditions thereby
reducing noise and vibration.

Non-skid pads

This side up

Stick adhesive side to floor

Remove backing

 Place the pads under both front feet.

11

HOW TO USE

ENGLISH

POWER (ON/OFF) BUTTON

A

Press to turn the washer ON. Press again to turn the
washer OFF.

NOTE: Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be lost.
The door will unlock after a brief pause unless the
water level or temperature is too high.

CYCLE SELECTOR KNOB

B

Turn this knob to select the desired cycle. Once the
desired cycle has been selected, the standard presets
will be shown in the display. These settings can be
adjusted using the cycle setting buttons anytime before
starting the cycle. (See the cycle guide on page 14 for
allowable settings. To protect your fabrics, not all
settings are allowed in all cycles.)

WARNING:

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

To reduce the risk of fire, electric shock, or injury to persons, read and follow this

CONTROL PANEL FEATURES

FE E

AGH

B C D

SPECIAL CYCLE AND OPTION BUTTONS

E

These buttons are used to activate special cycles or
options. See page 21 for details.

TIME AND STATUS DISPLAY

F

The display shows the estimated time remaining, cycle
status, and door lock status. See page 18 for a
complete description.

ADD STEAM BUTTON

G

Press the ADD STEAM button to add steam to the
selected cycle for added cleaning power.

NOTE: Steam can only be added to the following
cycles : Steam Refresh, Normal/Casual,
Bulky/Bedding, Kids Wear, Heavy Duty and Whitest
Whites. See page 20 for details.

START/PAUSE BUTTON

C

Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.

NOTE : If you do not press the START/PAUSE button
within 4 minutes of selecting a cycle, the washer
automatically turns OFF.

CYCLE MODIFIER BUTTONS

D

Use these buttons to adjust the desired cycle options
for the selected cycle. The lights above the buttons
show the current selection. See page 19 for a
complete description.

NOTE : Not all settings are available on all cycle
selections. See chart on page 14 for details.

12

DISPENSER

H

Dispenser drawer. This drawer contains the
compartments for detergent and additives.
See pages 16 -17 for complete information.

OPERATING THE WASHER

SOFTENER

MAX

1

2

3

HOW TO USE

SORT LAUNDRY AND LOAD WASHER

Refer to page 15.

ADD DETERGENT AND OTHER PRODUCTS

Open the dispenser drawer and add detergent to the main wash
compartment in the dispenser drawer. Add bleach and fabric softener as
desired. See pages 16 and 17 for important information on detergents and
dispenser use.

ENGLISH

TURN ON THE WASHER

Press the POWER button to turn ON the washer. The lights around the Cycle
Selector Knob will illuminate and a chime will sound. Refer to page 12.

SELECT A CYCLE

4

Turn the Cycle Selector Knob either direction to select the desired cycle. The
preset Wash/Rinse Temperature, Spin Speed, Soil Level, and Option settings
for that cycle will be shown. Refer to page 12.

SELECT CYCLE MODIFIERS

5

Default settings for the selected cycle can now be changed if desired. This
can be done using the cycle modifier buttons as shown on page 19
(Wash/Rinse, Spin Speed, Soil Level, and Chime).

NOTE: To protect your fabrics, not all modifiers are available on all cycles.

SELECT CYCLE OPTIONS

6

Cycle options can also be added using the option buttons as shown on page
20 and 21 (Stain Treat, 2

nd

Rinse, Control Lock, Add Steam, Clean Washer

and Delay Start).

NOTE: Not all options are available on all cycles.

BEGIN CYCLE

7

Press the START/PAUSE button to begin the cycle. Once the cycle has been
started, pressing the START/PAUSE again will pause the washer and retain
the existing settings for up to 4 minutes.

13

HOW TO USE

CYCLE GUIDE

The cycle guide below shows the default settings, available options and recommended fabric types for each
cycle. Allowable modifier adjustments are shown below the default setting for each cycle.

= Available option

= Default setting

ENGLISH

Cycle

Cycle Spin Speed Soil Level

Steam
Refresh

Normal/
Casual

Bulky/
Bedding

Kids wear

Heavy Duty

Whitest
Whites

Express
Wash

Cold Clean

Sanitize

Delicates

Fabric or

Load Type

Dress shirts, Blouses
(Load up to 5 garments)

Cotton, linen, towels,
shirts, sheets, jeans,
mixed loads

Large items such as
blankets and comforters

Kids Wear

Heavy soiled Cotton
Fabrics

White Fabrics

Lightly soiled clothing and
small loads

Small loads of cotton, linen,
towels, shirts, sheets,
jeans, mixed loads

Heavily soiled items, such
as work clothes, diapers,
etc.

Dress shirts/blouses
nylons, sheer or lacy
garments

Display

Time (Min.)

20

50-59

59

91-97

74-80

69-75

20

57-63

101-107

42

Wash

Motion

Wash/Rinse

Temperature

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Hot/Cold

Cold/Cold

Warm/Cold

Warm/Warm

Cold/Cold High

Extra Hot/Cold High

Cold/Cold

Warm/Cold

Warm/Warm

Modifiers Options

High

Extra High

No Spin

Low

Medium

Low

Medium
No Spin

High

Extra High

No Spin

Low

Medium

Extra High

No Spin

Low

Medium

High
High

Extra High

No Spin

Low

Medium

Extra High

No Spin

Low

Medium

High

Extra High

No Spin

Low

Medium

Extra High

No Spin

Low

Medium
Medium
No Spin

Low

Normal

Heavy

Light

Normal

Heavy

Light

Heavy

Light

Normal

Heavy

Light

Normal

Normal

Heavy

Light

Light

Normal

Heavy

Normal

Light

Normal

Heavy

Light

Normal

Heavy

Light

ADD

STEAM

nd

2

RINSE

STAIN

TREAT

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available with every cycle.

A chime will sound and the LED will not light if the selection is not allowed.

NOTE: These cycles use various wash motions to enhance cleaning and/or fabric care performance.

These wash motions may sound different at different stages of the wash cycle. This is normal.

NOTE: The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and

other operating condition.

14

SORTING WASH LOADS

HOW TO USE

Fabric Care Labels

Many articles of clothing include a fabric care label. Using
the chart below, adjust the cycle and options selections to
care for your clothing according to the manufacturer’s
recommendations.

Grouping Similar Items

For the best washing results and to reduce the possibility of
damage to the clothing, care should be taken to sort the
clothing into loads that are made up of similar items. Mixing
different fabric types and/or soil levels can result in poor wash
performance, color transfer or discoloration, fabric damage or
linting. Fabrics should be sorted into groups as described
below.

Colors

Sort articles by color. Wash dark clothes together in a
separate load from light colors or whites. Mixing dark clothes
with light clothes can result in dye transfer or discoloration of
the lighter clothes.

Soil Level

Wash heavily soiled clothes together. Washing lightly soiled
clothes in the same load with heavily soiled clothes could
result in poor wash performance for the lightly soiled clothing.

Fabric Type

Delicate articles should not be mixed with heavier or sturdier
fabric types. Washing delicates in a load with heavy fabrics
can result in damage to the more delicate fabrics. Washing
heavier fabrics in a delicate load can result in poor wash
performance for the heavier fabrics and possible damage to
the delicates.

Lint Type

Some fabrics attract and bind lint to them while others give off
lint in the laundry process. Avoid mixing these lint collectors
and lint producers in the same load. Mixing these fabrics will
result in pilling and linting on the lint collectors. (For example,
lint collector – knit sweater; lint producer – terrycloth towels)

Loading the Washer

• Check all pockets to make sure that they are empty.

Items such as clips, matches, pens, coins, and keys can
damage both your washer and your clothes.

• Close zippers, hooks, and drawstrings to prevent these
items from snagging or tangling on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load large items
first.

• Large items should not be more than half of the total wash
load.

• The washer can be fully loaded, but the drum should not be
tightly packed with items. The door of the washer should
close easily.

• To prevent an out-of-balance load, do not wash single
items. Add one or two similar items to the load. Large, bulky
items, such as a blanket, comforter, or bedspread, should
be washed individually.

• Do not wash or spin waterproof items, such as rain coats,
sleeping bags, etc.

• When unloading the washer, check under the door seal for
small items.

NOTE: Make sure the door seal area is clear when closing
the door. Overloading the washer can cause items to get
caught between the door and the seal. This can damage both
the items and the seal.

• DO NOT OVERLOAD THE DRUM

• MAKE SURE CLOTHING IS NOT
CAUGHT IN THE DOOR GASKET

Sort Laundry...

by Colors
Whites

Lights
Darks

by Soil
Heavy

Normal
Light

by Fabric
Delicates

Easy Care
Sturdy

by Lint
Lint Producer

Lint Collector

ENGLISH

15

ABOUT THE DISPENSER

The automatic dispenser consists of four compartments
which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.
(This compartment is not used on this model.)

• Liquid or powdered detergent and color-safe bleach for
main wash.

ENGLISH

HOW TO USE

Main Wash
Compartment

Liquid Chlorine
Bleach
Compartment

Liquid Fabric
Softener
Compartment

Prewash
Compartment

(This compartment is
not used on this model.)

Pre-Wash Detergent Compartment

The dispenser drawer has a compartment that is labeled
"Prewash". However, this model does not include a prewash
option. Do not put detergent in this compartment. Detergent
in this compartment will not be dispensed and will need to be
manually cleaned out.

Main Wash Detergent Compartment

This compartment holds laundry detergent for the main wash
cycle; this detergent is added to the load at the beginning of
the cycle. Always use HE (High-Efficiency) detergent with
your washing machine. Either powdered or liquid detergent
may be used.

Never exceed the manufacturer's recommendations when
adding detergent. Using too much detergent can result in
detergent buildup in clothing and the washer.

NOTE: Liquid or powdered color-safe bleach may be added
to the main wash compartment with detergent of the same
type. DO NOT add liquid or powdered color-safe bleach to
the bleach dispenser. DO NOT mix liquid and powdered
cleaning agents within the same compartment.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which will be
dispensed automatically at the proper time during the wash
cycle.

• Do not add powdered or liquid color-safe bleach to this
compartment. The bleach compartment is designed to
dispense liquid chlorine bleach only. Powdered or liquid
color-safe bleach will not dispense properly.

• Always follow the manufacturer's recommendations when
adding bleach. Do not exceed the maximum fill line since
this can cause the bleach to be dispensed immediately
causing damage to fabrics. Using too much bleach can
damage fabrics.

• Never pour undiluted liquid chlorine bleach directly onto the
load or into the drum. Fabric damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener, which will be
automatically dispensed during the final rinse cycle.

Never exceed the manufacturer's recommendations when
adding softener. Using too much fabric softener can result in
buildup in clothing and the washer. Either powdered or liquid
fabric softener may be used.

• Always follow the manufacturer's recommendations when
adding fabric softener. Do not exceed the maximum fill line.
Using too much fabric softener may stain clothes.

• Dilute concentrated fabric softeners with warm water.
Do not exceed the maximum fill line.

• Never pour fabric softener directly onto the load or into the
drum.

16

HOW TO USE

DETERGENT AND DISPENSER USE

A Word About Detergents

HE detergents produce fewer suds, dissolve more efficiently
to improve washing and rinsing performance, and help to
keep the interior of your washer clean.

Using non-HE detergent may cause oversudsing and
unsatisfactory performance which could result in error codes,
cycle failure, and machine damage.

MAXIMUM

Normal load amount

LIQUID

DETERGENT

For proper wash performance, always measure the
detergent using the measure provided with the detergent
by the manufacturer.

The normal amount needed for average loads is less than
1/2 of the recommended maximum. Use less detergent for
soft water, light soil or smaller loads. Never use more than
the maximum amount recommended by the detergent
manufacturer.

POWDERED

DETERGENT

Filling the Dispenser

To add detergent, bleach, and fabric softener to the
automatic dispenser:

1

Open the dispenser drawer.
Load the laundry products into the appropriate

2

compartments.
Close the drawer before starting the cycle.

3

NOTE: It is normal for a small amount of water to remain in

the bleach and softener compartments at the end of the
cycle.

IMPORTANT: Do not place or store laundry products, such
as detergent, bleach, or liquid fabric softener, on top of your
washer or dryer. Wipe up any spills immediately. These
products can damage the finish and controls.

NOTE: Do not put detergent or other laundry products in the
Prewash compartment. This compartment is not used on this
model

ENGLISH

Designed to use only
HE (High-Efficiency) detergent

IMPORTANT: Your washing machine is designed for use

with only High-Efficiency (HE) detergents. HE detergents are
formulated specifically for front-load washers and contain
suds-reducing agents. Always look for the HE symbol when
purchasing detergent.

IMPORTANT: Not all detergents are the same. Careful
attention must be paid to the amount of detergent used to
avoid overusing, poor rinsing and detergent buildup in
clothing, and residue buildup that can contribute to odors in
the machine. NEVER use a cup or scoop other than that
supplied by the manufacturer of the detergent you are using.
Never use more than the maximum amount recommended
by the manufacturer of the detergent.

While HE detergents are designed for this type of washing
machine, care must be used when measuring the detergent.
For most normal loads, no more than 1/2 to 3/4 of a cup or
scoop of HE detergent should be used.

NOTE: Extra care must be exercised when using 2X and 3X
concentrated detergents because even a little bit extra can
contribute to the problems mentioned above.

NOTE: Detergents designated as HE-COMPATIBLE may not
provide optimal results.

17

HOW TO USE

TIME AND STATUS DISPLAY

The time and status display shows the estimated time remaining, cycle progress, and door lock status.

C

B

ENGLISH

A

D

ESTIMATED TIME REMAINING

A

When the START/PAUSE is pressed, the washer
automatically detects the wash load (weight) and
optimizes the washing time, based on the selected cycle
and options. The display will then indicate the estimated
time remaining for the selected wash cycle.

NOTE:

• The time shown is estimated. For example, the time
displayed may pause for a period of time while the
machine is heating the water or balancing the load.
Under certain conditions, the machine can pause for
extended periods of time.

• Estimated time is based on normal operating conditions.
Several external factors (room temperature, incoming
water temperature, etc.) also affect the length of
estimated time vs. actual time.

LOAD-SENSING INDICATOR

B

This light will illuminate at the beginning of the cycle while
the control measures the size of the load. Once the size
has been determined, the control will adjust the cycle for
optimum performance. Estimated time remaining will not
be displayed until the load size has been determined and
may be different for each load.

CYCLE STATUS INDICATOR

C

These status LEDs illuminate to indicate which portion of
the cycle is currently running. A blinking light indicates the
active portion of the cycle. When that portion is complete,
the light will remain steady.

DOOR LOCK INDICATOR

D

Indicates that the door is locked. The washer door will lock
while the washer is operating. The door can be unlocked
by pressing the START/PAUSE to pause the washer.

NOTE:

• If the temperature in the washer is too high, the door
cannot be unlocked until the washer has cooled.

• If the water level is too high, the door will not unlock. To
drain the water, press POWER, then press the SPIN
SPEED button without selecting a cycle. Press
START/PAUSE and the water will be drained and the
clothes will be spun out. Do not try to force the door
open, as it will damage the door.

18

CYCLE MODIFIER BUTTONS

HOW TO USE

Each cycle has default settings that are selected
automatically. You may also customize these settings using
the cycle modifier buttons. Press the button for the desired
modifier until the indicator light for the desired value is lit.
The washer automatically adjusts the water level for the type
and size of wash load for best results and maximum
efficiency. Due to the high-efficiency nature of this product,
water levels may be much lower than expected. This is
normal operation and cleaning/rinsing performance will not
be compromised.

NOTE: To protect your garments, not every wash/rinse
temperature, spin speed, soil level, or option is available with
every cycle. A chime will sound and the LED will not light if a
selection is not allowed. See the Cycle Guide on page 14 for
details.

ENGLISH

A B C D

WASH/RINSE

A

Selects the wash and rinse temperature combination for
the selected cycle. Press the WASH/RINSE button until
the indicator light for the desired setting is lit.

• Your washer features a heating element to boost the hot
water temperature for Extra Hot settings.
This provides improved wash performance at normal
water heater settings.

• Select the water temperature suitable for the type of load
you are washing. Follow the garment fabric care labels
for best results.

• Warm rinses are regulated at approximately 86°F (30°C).

• Warm rinses leave the clothes drier than cold rinses, but
will result in increased energy consumption and greater
wrinkling of clothes.

• Cold rinses use less energy. The actual rinse
temperature depends on the temperature of the cold
water at the faucet.

SPIN SPEED

B

This extracts more water from clothes, reducing drying
time and saving energy.

Press the SPIN SPEED button until the indicator light for
the desired setting is lit. Some fabrics, such as delicates,
require a slower spin speed.

The Drain & Spin cycle:

1. Press the POWER button to turn ON the washer.

2. Press the SPIN SPEED button to select the desired

spin speed. For drain only, select the NO SPIN option.

3. Press the START/PAUSE button. The water will be

drained and the clothes will be tumbled before the
spin routine begins.

SOIL LEVEL

C

Adjusts the selected cycle to allow more time for heavily
soiled clothes or less time for lightly soiled clothes.
Press the SOIL LEVEL button until the indicator light for
the desired setting is lit.

CHIME

D

Press repeatedly to adjust the volume of the chime.
You may turn the end-of-cycle chime and keypad tones
on or off with the CHIME button.

19

STEAM CYCLES AND OPTIONS

HOW TO USE

ADD STEAM Option

Steam cycles include the Steam Refresh,
Normal/Casual, Bulky/Bedding, Kids Wear,
Heavy Duty and Whitest Whites. Adding
steam to these cycles provides superior
cleaning performance while reducing

energy and water consumption.
By using a hot steam spray from above and cooler water

below, fabrics get the cleaning benefits of a super hot wash,
without the energy usage or potential damage to fabrics.

To ADD STEAM to a cycle:

Turn on the washer and turn the cycle selector knob to

1

select a cycle that allows the steam option.

ENGLISH

Press the ADD STEAM button. The washer will

2

automatically adjust the cycle settings.
Set any other desired options.

3

Press the START/PAUSE button to start the cycle.

4

CAUTION:

The door may become quite warm during steam cycles. This
is normal.

Do not attempt to override the door lock mechanism or reach
into the washer during a steam cycle. Steam can cause
severe burns.

IMPORTANT NOTES ABOUT STEAM CYCLES:

• Steam may not be visible during the steam cycles. This is
normal.

• Do not use steam with delicate fabrics such as wool, silk, or
easily discolored fabrics.

Using the STEAM REFRESH Cycle

STEAM REFRESH uses the power of steam alone to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended time
and makes heavily wrinkled clothes easier to iron. STEAM
REFRESH can also be used to help reduce odors in fabrics.

To use the STEAM REFRESH cycle:

Turn on the washer and turn the cycle selector knob to

1

select the STEAM REFRESH cycle.
Load up to 5 items and close the door.

2

NOTE: If there is any moisture inside the drum, such as

from a previous wash cycle, wipe the drum dry with a
towel before adding clothes.

Press the ADD STEAM button until the correct number

3

of items is shown in the display.
No other options need to be set. The cycle is designed
to refresh from 1 to 5 garments.

Press the START/PAUSE button to start the cycle.

4

After the STEAM REFRESH cycle is complete, the washer
will tumble the clothes for up to 30 minutes to prevent
clothes from becoming wrinkled again.

After removing clothes from the STEAM REFRESH cycle,
they may feel slightly damp. If desired, hang clothes on a
hanger for a few minutes before wearing.

• The STEAM REFRESH cycle is not recommended for use
with 100% cotton clothing. Best results can be obtained
with 70/30 cotton/poly blend fabrics.

• Remove stains from clothing before using the STEAM
REFRESH cycle; the high heat could cause stains to set
permanently.

• Do not use STEAM REFRESH with the following items:
wool, blankets, leather jackets, silk, wet clothes, lingerie,
foam products, or electric blankets.

• Best results are achieved when articles are of similar size
and fabric type. Do not overload.

20

HOW TO USE

CYCLE OPTION BUTTONS SPECIAL FUNCTIONS

Your washing machine features several additional cycle
options to customize cycles to meet your individual needs.

Turn ON the washer and turn the cycle selector knob to

1

select the desired cycle.
Use the cycle modifier buttons to adjust the settings for

2

that cycle.
Press the cycle option button(s) for the option(s) you

3

would like to add. The button will light when that option
is selected.
If the selected option is not allowed for the selected
cycle, the chime will sound twice to inform you that it is
not allowed.

Press the START/PAUSE button to start the cycle. The

4

washer will start automatically after a brief delay for
locking the door.

NOTE: To protect your garments, not every option is
available with every cycle. See the CYCLE GUIDE on page
14 for details.

NOTE: If the START/PAUSE button is not pressed within 4
minutes, the control will shut off and the settings will be lost.

DELAY START

Once you have selected the cycle and other
settings, press this button to delay the start
of the wash cycle. Each press of the button
increases the delay time by one hour, for up
to 19 hours. Once the desired delay time is

set, press the START/PAUSE button to start the delay time.

2ndRINSE

This option will add an extra rinse to the
selected cycle. Use this option to help
ensure the removal of detergent or bleach
residue from fabrics.

STAIN TREAT

Use this option for heavily soiled loads that
need improved stain treatment. When
STAIN TREAT is selected, the water
temperature for the selected cycle will begin

as warm water to help prevent the setting of
certain types of stains. Then as the cycle progresses, the
water will be heated to higher temperatures to help remove
stains that require treatment at higher temperatures. This
option is designed for optimum stain removal.

NOTE:

• If STAIN TREAT is selected with the SANITIZE cycle, the

cycle will begin with very hot water since that is default for
that cycle and cannot be changed.

CONTROL LOCK

Use this option to disable the controls. The
washer can be locked during a cycle. This
feature allows you to prevent children from
changing cycles or operating the machine.

Once set, the CONTROL LOCK must be
turned OFF before the controls can be used. Once the
washer has shut off, the power button will allow the machine
to be turned ON, but the controls will still be locked. When
the controls are locked, “CL” will be displayed alternately
with the estimated time remaining.

Press and hold the CONTROL LOCK button for 5 seconds
to activate or deactivate the controls.

CLEAN WASHER

A buildup of detergent residue can occur in
the wash tub over time and can lead to a
mildewy or musty smell. The CLEAN
WASHER cycle is specially designed to

remove this buildup using bleach or other
cleaner designed specifically for cleaning front load
washers. The CLEAN WASHER cycle should be run once a
month, or more often under heavy use conditions or if odor
is present.

Turn ON the washer and press the CLEAN WASHER

1

button. Selecting any other cycle after CLEAN WASHER
has been selected will cause the CLEAN WASHER
cycle to be cancelled.

Fill the bleach dispenser to the MAX line with liquid

2

chlorine bleach*. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to be dispensed
immediately.

Press the START/PAUSE to start the cycle.

3

After the cycle has ended, open the door and allow the

4

drum interior to dry completely.
NOTE: Do NOT use this cycle with clothes, and do NOT

add detergent or fabric softener.

* For powdered tub cleaners, add the cleaner to the main

wash compartment of the dispenser drawer. Place tablet
cleaners directly into the tub. Always follow the cleaner
manufacturers instructions and recommendations.

ENGLISH

21

CARE AND CLEANING

WARNING:

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious

injury, fire, electrical shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.

To reduce the risk of fire, electric shock, or injury to persons, read and follow this

REGULAR CLEANING

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of
the machine can be cleaned with warm water and a mild, non­abrasive household detergent.

Immediately wipe off any spills with a soft, damp cloth.
IMPORTANT: Do not use methylated spirits, solvents, or

similar products. Never use steel wool or abrasive cleaners
because they can damage the surface.

Care and Cleaning of the Interior

ENGLISH

Use a towel or soft cloth to wipe around the washer door
opening, door seal, and door glass. These areas should be
kept clean to ensure a watertight seal. Be sure to wipe under
the inside rubber seal to remove any moisture or soil.

Always remove items from the washer as soon as the cycle is
completed. Leaving damp items in the washer can cause
wrinkling, color transfer, and odor.

Run the CLEAN WASHER cycle once a month, or more often if
needed, to remove detergent buildup and other residue.

Read these instructions carefully before beginning the
CLEAN WASHER cycle.

Open the door and remove any clothing in the wash drum.

1

Open the dispenser drawer.

2

Add liquid chlorine bleach or tub cleaner.

3

Some powder or tablet tub cleaners which are manufactured for
this purpose can be used.
(NOTE : Do not add any laundry detergent or fabric softener to
the drawer when using CLEAN WASHER.)

- If using liquid chlorine bleach

Add liquid chlorine bleach to the bleach compartment of the
drawer. (NOTE : Do not exceed the maximum fill line and do
not pour undiluted liquid bleach directly into the wash drum.)

- If using powder cleaner

Remove the liquid detergent cup and add powder cleaner to
the main wash compartment of the dispenser drawer.

- If using tablet cleaner

Add tablet cleaner to the wash drum directly.
(NOTE : Do not add tablet cleaner to the dispenser drawer.)

4

Close the drawer and washer door.
Select CLEAN WASHER and press START/PAUSE.

5

NOTE: It is recommended that CLEAN WASHER should be

repeated monthly. If mildew or musty smell already exists, run
CLEAN WASHER for 3 consecutive weeks. After CLEAN WASHER
is complete or when the washer is not used, leave the washer door
open for better ventilation and drying inside of the washer.

Door Seal and Glass Cleaning

Due to the location and nature of the door seal, some detergent
and soil residue may build up on the door glass and seal.

Periodic cleaning with a bleach solution can help remove
buildup and stains and can help sanitize the seal to prevent
odors.

NOTE: Wear rubber gloves and eye protection while performing
the following procedure:

Dilute 3/4 cup (177 ml) liquid chlorine bleach with 1 gallon

1

(3.8 L) of warm/hot water.
Use this solution to wipe down all

2

surfaces of the gasket and glass
gasket to remove any deposits
left there. (The gasket is stiff. Be
sure to fold back the lip of the
gasket to get under the edge
where residue can build up.)

3

Wipe the gasket and glass with a dry cloth.
Leave the door open to allow the gasket to dry completely.

4

NOTE:

• Follow the manufacturer's instructions for proper use of bleach.

• Do not use undiluted bleach as this will damage the gasket.

Removing Mineral Buildup

If you live in an area with hard water, lime scale can form on
internal components of the washer. Use of a water softener is
recommended in areas with hard water.
Use a descaler, such as Washer Magic®, and run the CLEAN
WASHER cycle before washing clothing.
Do NOT use steel wool or abrasive cleaners; they can damage
the surface.

Storing the Washer

If the washer will not be used for an extended period of time and
is in an area that could be exposed to freezing temperatures:

Turn OFF water supply tap.

1

Disconnect hoses from water supply and drain water from hoses.

2

Plug the power cord into a properly grounded electrical outlet.

3

Add 1 gallon of nontoxic recreational vehicle (RV)antifreeze to

4

the empty wash drum. Close door.
Select the spin cycle and let washer spin for 1 minute to drain out

5

all the water.
NOTE: Not all of the RV antifreeze will be expelled.

Unplug the power cord, dry the drum interior with a soft cloth, and

6

close the door.
Remove the inserts from the dispenser. Drain any water in

7

compartments and dry the compartments.
Store the washer in an upright position.

8

To remove the antifreeze from the washer after storage, run

9

washer through a complete cycle using a small amount of
detergent. Do not add laundry!

22

CARE AND CLEANING

SOFTENER

MAX

SOFTENER

MAX

REGULAR CLEANING (cont.)

Cleaning the Dispenser

The dispenser should be cleaned periodically to remove buildup of detergent and other laundry products that can cause the
dispenser not to dispense the laundry product properly.

ENGLISH

1. Pull the dispenser drawer out until it stops.

2. Press down the lock tab located between the bleach

and softener compartments and slide the drawer out.

3. Remove the liquid detergent box, softener and bleach

inserts from their compartments.

4. Clean the dispenser compartments with warm soapy

water.

23

CARE AND CLEANING

MAINTENANCE

Cleaning the Water Inlet Filters

If the washer detects that water is not entering the dispenser, an
error message will show on the display. Inlet valve filter screens
could be plugged by hard water scale, sediment in the water
supply, plumbing scale, etc.

NOTE: The inlet screens protect the delicate parts of the fill
valve from being damaged by particles that may get into the
valves with the water supply. Operating the washer with the
filters removed could cause a valve to fail to open resulting in
flooding and/or property damage.

ENGLISH

Inlet Filter

1. Turn OFF both water taps completely. Unscrew the hot and

cold water lines from the back of the washer.

IMPORTANT: Use ONLY the inlet hoses provided with this
laundry product. Aftermarket hoses are not guaranteed to fit or
function correctly. Other hoses may not tighten correctly and
could cause leaks. Subsequent damage to product or property
will not be covered under the terms of the product warranty.

2. Carefully remove the filters from the water valves and soak

them in white vinegar or a lime scale remover, following the
manufacturer's instructions. Rinse thoroughly before
reinstalling.
Press the filters back into place and reattach the water lines.

24

CARE AND CLEANING

MAINTENANCE (cont.)

Cleaning the Drain Pump Filter

Your Washer is equipped with a filter that helps prevent excess
lint and foreign objects like buttons, keys, and coins from
causing damage to the pump. If the washer fails to drain
properly, unplug the washer and allow the water to cool, if
necessary, before proceeding.

Plug

1. Open the drain pump filter access panel. 3. Remove the plug from the drain hose, and allow the water to

drain completely.

NOTE: If there is a large amount of water in the tub, you may
have to empty your container several times.

Pump Filter

ENGLISH

Drain Hose

2. Unclip the drain hose and pull it out. Place the end of the

drain hose into a shallow pan or a floor drain. Use care not to
pull the hose out too far or it may not drain properly.

4. Twist the pump filter counterclockwise to remove. Remove

any lint and foreign objects from the pump filter.
Reverse the procedures described in the steps above to
reinstall the filter and drain plug. Be sure to close the cover.

25

TROUBLESHOOTING GUIDE

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the washer is
operating. They are normal.

Clicking:

Door lock relay when the door locks and unlocks.

Spraying or hissing:

Water spraying or circulating during the cycle.

Humming or gurgling:

Drain pump pumping water from the washer at the end of a
cycle.

Splashing:

Clothes tumbling in the drum during the wash and rinse cycles.

BEFORE CALLING FOR SERVICE

Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If
your washer does not function properly or does not function at all, check the following before you call for service.

Rattling and clanking noise

ENGLISH

Check if... Then...

Foreign objects, such as keys, coins, or safety pins, may be
in drum or pump.

Stop washer and check drum and drain filter for foreign objects. If
noise continues after washer is restarted, call for service.

Thumping sound

Check if... Then...

Heavy wash loads may produce a thumping sound.

Washer load may be out of balance.
Washing shoes or tightly tangled clothes.

This is normal. If sound continues, washer is probably out of
balance. Stop and redistribute wash load.

Pause the cycle and redistribute the load after the door unlocks.

Vibrating noise

Check if... Then...

Shipping bolts and/or packaging materials not removed.

Wash load may be unevenly distributed in the drum.
Not all leveling feet are resting firmly and evenly on the

floor.
Floor not rigid enough.

See Unpacking and Removing Shipping Bolts in the Installation
Requirements on page 8.

Pause the cycle and redistribute the load after the door unlocks.
See Leveling the Washer in the Installation Instructions on page 11.

Make sure that the floor is solid and does not flex.
See Flooring in the Installation Requirements on page 7.

Water leaking around washer

Check if... Then...

Fill hose connection is loose at tap or washer.
House drain pipes are clogged.
Drain hose has come out of drain.

Drain hose is not inserted far enough.

Check hoses. Check and tighten hose connections.
Unclog drain pipe. Contact a plumber if necessary.
Tie drain hose to inlet hose or standpipe to prevent it from coming

out during drain. It should be inserted about 8-12 inches into the
standpipe.

Excessive sudsing

Check if... Then...

Too much detergent or incorrect detergent. Only use detergent with the HE (High-Efficiency) logo.

See Detergent Use in the How to Use section on page
16-17.

26

TROUBLESHOOTING GUIDE

BEFORE CALLING FOR SERVICE (cont.)

Staining

Check if... Then...

Were bleach or softener added directly to the wash load in
the drum?

Washer not unloaded promptly.

Clothes not properly sorted.

Laundry chemicals must be loaded into the dispenser.

Always remove items from the washer as soon as possible after the
cycle is complete.

Always wash dark colors separately from light colors and whites to
prevent discoloration. If possible, do not wash heavily soiled items
with lightly soiled ones.

Water in the washer drains slowly or not at all, or the display shows:

Check if... Then...

Drain hose is kinked, pinched, or clogged.

The drain pump filter is clogged.

Drain discharge is more than 96" above bottom of washer.

Make sure the drain hose is free of clogs, kinks, etc., and is not
pinched behind or under the washer.

Clean the drain pump filter. See Maintenance in the Care and
Cleaning section on page 25.

Adjust or repair drain.

ENGLISH

Washer fills with water slowly or not at all, or the display shows:

Check if... Then...

Water supply taps are not open fully.
Water line hoses are kinked, pinched, or crushed.

Water inlet filters are clogged.

Water pressure to tap or house is too low.

Water supply connected with leak-limiting hoses.

Make sure that the water taps are open fully.
Make sure the hoses are not kinked or pinched.

Be careful when moving the washer.
Clean the inlet filters. See Maintenanse in the Care and Cleaning

section on page 24.
Check another faucet in the house to make sure that household

water pressure is adequate.
Hoses designed to limit leaks can trip falsely and prevent washer

from filling.

Washer will not turn ON

Check if... Then...

Power cord is not properly plugged in.

House fuse is blown, circuit breaker has tripped, or power
outage has occurred.

Make sure that the plug is plugged securely into a grounded,
3-prong, 120-VAC, 60-Hz. outlet.

Reset circuit breaker or replace fuse. Do not increase fuse capacity.
If the problem is a circuit overload, have it corrected by a qualified
electrician.

Cycle won't start, or the display shows:

Check if... Then...

The door is not closed properly. Make sure that the door is closed properly and press the

START/PAUSE button. After starting a cycle, it may take a few
moments before the drum begins to turn or spin. The washer will not
operate unless the door is locked.

If the door is closed and locked and the open door error message is
displayed, call for service.

27

TROUBLESHOOTING GUIDE

BEFORE CALLING FOR SERVICE (cont.)

Door will not unlock when cycle is stopped or paused

Check if... Then...

Interior temperature of washer is too high.

Water level in washer is too high.

Wash cycle time is longer than usual

Check if... Then...

The washer automatically adjusts the wash time for the

ENGLISH

amount of laundry, water pressure, water heating time and
other operating conditions.

Musty or mildewy odor in washer

Check if... Then...

Incorrect or too much detergent has been used.

Inside of tub not cleaned properly.

The washer door has a safety feature to prevent burns.
For example, if the washer is paused during the hot wash portion of
a Sanitize cycle, the interior temperature of the drum will be very hot,
so the door will not unlock. This is normal. Allow the washer to cool
until the DOOR LOCK indicator turns OFF on the display.

To drain the water, press POWER, then press the SPIN SPEED
button without selecting a cycle.

This is normal. The washer adjusts cycle time automatically to
provide optimal results for the selected cycle. The time remaining
shown in the display is only an estimate. Actual time may vary.

Use only HE (High-Efficiency) detergent in accordance with the
manufacturer's instructions.

Run the CLEAN WASHER cycle regularly. Be sure to wipe around
and under the door seal frequently. See Care and Cleaning of the
Interior on page 22.

Clean around door seal/glass to prevent odor or mildew:

1. Wipe dry the door seal/glass and the door opening area.

2. Wipe around the inner drum/door seal and the lower door seal.

3. For difficult-to-remove odors, use Affresh available at your local
Sears store or online at www.partsdirect.com.

Wrinkling

Check if... Then...

Washer not unloaded promptly.

Washer overloaded.

Hot and cold water inlet hoses are reversed.

Always remove items from the washer as soon as the cycle is
complete.

The washer can be fully loaded but the drum should not be tightly
packed, and the door should close easily.

Hot water rinse can set wrinkles in garments. Check the inlet hose
connections.

28