LG 4015 User Manual
LG 4015
User Guide
LG 4015
User Guide
MMBB0127101 (1.0)
Some of contents in this manual may differ from
your phone depending on the software of the
phone or your service provider.
LG 4015
Guide de l’utilisateur
Une partie du contenu de ce manuel peut
différer de votre téléphone, selon le logiciel qui
y est installé ou votre fournisseur de services.
1. WHAT THIS WARRANTY COVERS
:
LG offers you a limited warranty that the enclosed subscriber unit
and its enclosed accessories will be free from defects in material and
workmanship, according to the following terms and conditions:
1. The limited warranty for the product extends for ONE (1)
year beginning on the date of purchase of the product by the
original end user.
2. The limited warranty extends only to the original end user of the
product and is not assignable or transferable to any subsequent
purchaser/end user.
3. This warranty is good only to the original end user of the product
during the warranty period as long as it is in Canada.
4. Upon request from LG, the consumer must provide infromation to
reasonably prove the date of purchase.
5. During the applicable warranty period, LG will repair or replace at
LG’s sole option, without charge to the original end user, any defective
component part of the phone or accessory.
6. LG may, use rebuilt, reconditioned or new parts or components when
repairing any product or replace a product with a rebuilt,
reconditioned or new product.
2. WHAT THIS WARRANTY DOES NOT COVER
:
1. Defects or damages resulting from use of the product in other than its
normal and customary manner.
2. Defects or damages from abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation or other acts
which are not the fault of LG, including damage caused by spills of
food or liquids.
3. Breakage or damage to antennas unless caused directly by defects in
material or workmanship.
4. The fact that the Customer Service Department at LG was not notified
by the original end user of the alleged defect or malfunction of the
product, during the warranty period.
5. Products which have had their serial numbers removed or made
illegible.
LIMITED WARRANTY STATEMENT
6. Damage resulting from use of non-LG approved accessories.
7. All plastic surfaces and all other externally exposed parts that are
scratched or damaged due to normal customer use.
8. Products serviced by non-authorized persons or companies.
Notes:
1. This limited warranty is in lieu of all other warranties, express or
implied either in fact or by operations of law, statutory or otherwise,
including, but not limited to any implied warranty of merchantability or
fitness for a particular purpose.
2. Shipping damage is the sole responsibility of the shipping company.
3. EXCLUSION OF LIABILITY
:
No other express warranty is applicable to this product.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF MARKETABILITY, IS LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY HEREIN.
LG ELECTRONICS CANADA, INC. SHALL NOT BE LIABLE FOR THE
LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE, LOSS OR
ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT
OF THE USE OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING
THE IMPLIED WARRANTY OF MARKETABILITY APPLICABLE TO THIS
PRODUCT.
4. HOW TO GET WARRANTY SERVICE
:
To obtain warranty service, please call the following telephone number
from anywhere in Canada:
LG Electronics Canada, Inc.
Tel. 1-888-542-2623
www.lg.ca (see links to “Wireless Phone Service”)
Electronics Canada Inc.
Mississauga, Ontario
LG 4015
User Guide
Unpacking 8
For Your Safety
9
Your Phone
14
Phone Components 14
Your Phone’s Features
15
Display Information
17
Getting Started 19
Installing the SIM Card 19
Charging the Battery
22
Turning Your
Phone On and Off
24
Access Codes
25
General Functions 26
Making a Call 26
Making a Call by
pressing the Send Key
26
Making International Calls
26
Ending a Call
26
Making a Call
From the Contact List
27
Adjusting the Volume
27
Answering a Call
27
Vibrate Mode (Quick)
28
Signal Strength
28
Entering Text
28
Selecting Functions
and Options
33
Address Book
34
In-Call Menu
35
During a Call 35
Making a Second Call
35
Swapping
Between Two Calls
35
Answering an Incoming Call
35
Rejecting an Incoming Call
36
Muting the Microphone
36
Multiparty or
Conference Calls 37
Making a Second Call
37
Setting up a
Conference Call
37
Activate the
Conference Call on Hold
37
Adding Calls to the
Conference Call
37
Private Call in a
Conference Call
38
Ending a Conference Call
38
Menu Tree 39
Sounds
42
Download Ring Tunes 42
Ringtones
42
4
Table of Contents
5
Volume 42
Message Alert Tones
42
Key Tones
43
Messaging 44
Text Messages 44
Write Message
44
Inbox
45
Outbox
45
Drafts
46
Settings
46
Delete All
47
Voice Mail
47
Listen To Voice Mail
47
Voice Mailbox Number
47
Download Messages
48
Inbox
48
Receive
48
Templates
49
Text
49
Business Card
49
Memory Status
49
Internet 50
GoRogers 51
Access Point
51
Cache Settings
52
Clear Cache 52
Cache Check
52
Security Certificates
52
WAP Information
52
Games & Apps 53
Download Games 53
Games & Apps
53
View Information
54
Memory Status
54
Java Version
54
Media Services 55
Games & Apps 55
Ringtone/Audio
55
Graphics
55
Multimedia Contents
56
Recent Calls 57
Missed Calls 57
Dialed Calls
57
Received Calls
58
Delete Recent Calls
58
Call Durations
58
Last Call
58
Received Calls
58
Dialed Calls
58
All Calls
59
Call Costs
59
6
Last Call’s Cost 59
All Calls’ Cost
59
Cost Settings
60
Call Cost’s Limit
60
Set Tariff
60
Auto Display
60
Data Information
61
WAP Information
61
External Device
61
Total Data
61
Tools 62
Alarm Clock 62
Schedule
63
Calculator
64
Memo
65
World Time
66
Unit Converter
66
Address Book 67
Contact List 67
New Contact
68
Speed Dials
68
Caller Groups
69
Copy All
70
SIM To Phone
70
Phone To SIM
70
Delete All
70
Settings 70
Set Memory
70
Set View Detail
71
Information
71
Service Dial Number
71
Memory Status
71
Own Number
71
Settings 72
Display 72
My Wallpaper
72
Backlight
72
Contrast
73
Languages
73
LED Indicator
73
Date & Time
74
Set Date
74
Date Format
74
Set Time
74
Time Format
74
Auto Update
74
Call Settings
75
Call Forwarding
75
Answer Mode
76
Send My Number
76
Call Waiting
76
Minute Minder
76
Auto Redial
76
Closed User Group
77
7
Send DTMF 77
Security
78
PIN Code Request
78
Call Barring Service
78
Fixed Dial Number (FDN)
79
Change Codes
79
Connection
80
Network Selection
80
GPRS Attach
80
Access Point
81
Reset Access Point
81
Reset Setting
81
Q & A 82
Accessories
85
Safety Guidelines
87
Glossary
101
Index
104
8
Check to make sure that you have all the parts shown below.
Unpacking
Handset Standard
Battery
User GuideTravel Charger
9
Important Information
This user guide contains important information on the use and operation of
this phone. Please read all the information carefully for optimal
performance and to prevent any damage to, or misuse of, the phone. Any
changes or modifications not expressly approved in this user guide could
void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not expose
your phone to high humidity areas, such as the bathroom, swimming pool,
etc.
Always store your phone away from heat. Never store your phone in
settings that may expose it to temperatures less than -18°C or greater than
40°C, such as outside during a snowstorm or in your car on a hot day.
Exposure to excessive cold or heat will result in malfunction, damage
and/or catastrophic failure.
Be careful when using your phone near other electronic devices. RF
emissions from your mobile phone may affect nearby inadequately
shielded electronic equipment. You should consult with manufacturers of
any personal medical devices such as pacemakers and hearing aides to
determine if they are susceptible to interference from your mobile phone.
Turn off your phone in a medical facility or at a gas station.
Never place your phone in a microwave oven as this will cause the battery
to explode.
IMPORTANT! Please read the TIA SAFETY INFORMATION on page
87 before using your phone.
For Your Safety
10
Safety Information
Please read and observe the following information for the safe and proper
use of your phone and to prevent any unanticipated damage. Also, keep the
user’s manual in an accessible place at all times after reading it.
]
Unplug the power cord and charger during a lightning storm to avoid
electric shock or fire.
]
Do not use your phone in high explosive areas as the phone may
generate sparks.
]
Do not put your phone in a place subject to excessive dust, and keep the
minimum required distance between the power cord and heat sources.
]
Do not damage the power cord by bending, twisting, pulling or
subjecting it to heat. Do not use the plug if it is loose as it may cause
fire or electric shock.
]
Hold the power cord plug firmly to plug and unplug the power cord.
Ensure the plug is firmly connected. If it is not firmly connected, it may
cause excessive heat or fire.
]
Do not place a heavy item on the power cord. Do not allow the power
cord to be crimped as it may cause fire or electric shock.
]
Be careful not to let the battery contact metal conductors such as a
necklace or coins. When shorted, it may cause an explosion.
]
Do not disassemble or impact the battery as it may cause electric shock,
short-circuit and fire. Store the battery in a place out of reach of
children.
]
Using a damaged battery or placing a battery in your mouth may cause
serious injury.
]
Charging is displayed on the screen after connecting the travel adapter.
Only if the battery is totally empty, Call indicator Light is on without
displaying "Charging".
For Your Safety
11
]
Do not place items containing magnetic components such as a credit
card, phone card, bank book or a subway ticket, near your phone. The
magnetic strip can be damaged by the phone.
]
Do not hold or let the antenna come in contact with your body during a
call.
]
Talking on your phone for a long period of time may reduce the call
quality due to heat generated during the use of the phone.
]
Do not allow excessive vibration or impact to the phone.
]
When you do not plan to use the phone for a long period of time, store it
in a safe area with the power cord unplugged.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications (FCC) of the United States,
with its action in Report and Order FCC 96-326, adopted an updated safety
standard for human exposure to radio frequency (RF) electromagnetic
energy emitted by FCC regulated transmitters. Those guidelines are
consistent with the safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC guidelines and these
international standards.
For Your Safety
12
CAUTION
Use only the supplied and approved antenna. Use of unauthorized antennas
or modifications could impair call quality, damage the phone, void your
warranty and/or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged antenna
comes into contact with skin, a minor burn may result. Contact your local
dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back of
the phone kept 10mm between the user’s body and the back of the phone.
To comply with FCC RF exposure requirements, a minimum separation
distance of 10mm must be maintained between the user’s body and the
back of the phone. Third-party belt-clips, holsters and similar accessories
containing metallic components should not be used. Body-worn
accessories that cannot maintain 3/4 inch (2 cm) separation distance
between the user’s body and the back of the phone, and have not been
tested for typical body-worn operations may not comply with FCC RF
exposure limits and should be avoided.
Vehicle Mounted External Antenna (optional, if
available)
A minimum separation distance of 8 inches (20 cm) must be maintained
between the user/bystander and the vehicle mounted external antenna to
satisfy FCC RF exposure requirements.
For more information about RF exposure, visit the FCC website at
www.fcc.gov
For Your Safety
13
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules.
Operation is subject to the following two conditions: (1) This device and
its accessories may not cause harmful interference, and (2) this device and
its accessories must accept any interference received, including
interference that may cause undesired operation.
Cautions for Battery
]
Do not disassemble.
]
Do not short-circuit.
]
Do not expose to high temperature: 60°C (140°F).
]
Do not incinerate.
Battery Disposal
]
Please dispose of your battery properly or bring to your local wireless
carrier for recycling.
]
Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
]
Using the wrong battery charger could damage your phone and void
your warranty.
]
The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or use it in
places with high humidity, such as the bathroom.
For Your Safety
14
1. Earpiece
7. Active flip
8. Display screen
9. Navigation key
2. Left soft key
3. Side keys
4. Send key
10. Confirmation key
11. Right soft key
12. Message key
14. Clear key
13. End / Power key
6. Microphone
5. Alphanumeric keys
Phone Components
Your Phone
15
Your Phone’s Features
1. Earpiece
2,11. Left soft key / Right soft key: Each of these keys perform the
functions indicated by the text on the display immediately above them.
3. Side keys: These keys are used to control the volume of ring tone in
standby mode and speaker volume during a call.
4. Send key: You can dial a phone number and answer incoming calls.
Press this key in standby mode to quickly access the most recent
incoming, outgoing and missed calls.
5. Alphanumeric keys: These keys are used to dial a number in standby
mode and to enter number or characters in edit mode.
6. Microphone: Can be muted during a call for privacy.
7. Active flip: Open the flip to answer an incoming call and close to end
the call.
8. Display screen: Displays phone status icons, menu items, Web
information, pictures and more in full colour.
9. Navigation key: Use for quick access to phone functions.
10. Confirmation key: Long press will launch GoRogers. Allows you to
select and confirm menu options.
12. Message key: Use to retrieve or send text messages.
13. End/Power key: Allows you to power the phone on or off, end calls or
return to Standby Mode.
14. Clear key: Allows you to delete the characters entered or return you to
the previous screen.
Your Phone
16
Antenna
Ear-microphone
jack
Side keys
Backlight
A backlight illuminates the display and the keypad. When you press any
key or open the flip, the backlight turns on. It turns off if no key is pressed
within a given period of time, depending on the Backlight menu option.
After one minute, the display turns off to conserve your battery power. To
specify the length of time the backlight is active, set the Backlight menu
option (Menu 9.1.2). See page 72 for further details.
Lamp
The red light illuminates when you turn the power on and when you have
an incoming call or message.
Your Phone
Lamp
17
Display Information
Your Phone
Area Description
First line Displays various icons. See page 18
Middle lines Display messages, instructions and any information that
you enter, such as number to be dialed.
Last line Shows the functions currently assigned to the two soft
keys.
Icon area
Text and
graphic area
Soft key
indications
18
Your Phone
On-Screen Icons
The table below describes various display indicators or icons that appear
on the phone’s display screen.
Icon Description
Indicates the strength of the network signal.
Indicates a call is in progress.
Indicates that you are roaming off the network.
Indicates that GPRS service is available.
Indicates the alarm has been set and is on.
Indicates the status of the battery charge.
Indicates the receipt of a text message.
Indicates the receipt of a voice mail.
Indicates that you can use the download message service.
Indicates that the vibration ringer has been set.
Indicates the Silent profile is activated.
Indicates the Headset profile is activated.
Indicates the Car profile is activated.
Indicates the General profile is activated.
Indicates the Schedule function.
19
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a plug-in
SIM card loaded with your subscription details, such as your PIN, any
optional services available and many others.
1. If necessary, switch off the phone by holding down the key until
the power-off image displays.
2. Remove the battery. To do so:
1 Pull and hold the battery lock above the battery toward the top of the
phone.
2 Lift the battery away, as shown.
Getting Started
Important! The plug-in SIM card and its contacts can be easily damaged
by scratches or bending, so be careful when handling, inserting
or removing the card. Keep all SIM cards out of the reach of
small children.
1
2
20
Getting Started
Note When you need to remove the SIM card, slide it, as shown, and take it
out of the socket.
3. Slide the SIM card into the SIM card socket so that it locks the card into
place. Make sure that the notched corner is bottom left and the gold
contacts of the card face into the phone.
21
5. Press the battery until it clicks into place. Make sure that the battery is
properly installed before switching the phone on.
Getting Started
4. Place the battery so that the tabs on the end align with the slots at the
bottom of the phone.
22
Getting Started
3. When charging is finished, disconnect the adapter from the power outlet
and from the phone by pressing on the gray tabs on both sides of the
connector while pulling the connector out.
Charging the Battery
Use of unauthorized accessories could damage your phone and invalidate
your warranty.
To use the travel charger provided with your phone:
1. With the battery in position on the phone, connect the lead from the
travel charger to the bottom of the phone. Check that the arrow on the
lead connector is facing towards the front of the phone.
2. Connect the adapter to a standard AC wall outlet. Only use the travel
charger that comes included with the package.
Warning You must unplug the adapter before we remove the battery from
the phone during charging; otherwise, the phone could be
damaged.
1
1
2
23
Getting Started
Notice
]
If your phone is powered on while charging, you’ll see the bars in the
battery indicator icon cycle.
When the battery is fully charged, the bars in the battery indicator icon will
flash on and off
]
If your phone is powered off, the display will show the charging status.
‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
]
After turning the phone on and off, please attempt to recharge the battery.
]
After detaching and reattaching the battery, please attempt to recharge the
battery.
Full
Charging
24
Turning Your Phone On and Off
1. Open the flip.
2. Hold down the key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press the left soft key
[OK]. For further details, see page 78.
The phone searches for your network and after finding it, the idle screen,
illustrated below, appears on the display. Now, you can make or receive
a call.
4. When you wish to switch the phone off, hold down the key until
the power-off image displays.
Note The display language is preset to English at the factory. To change the
language, use the Languages menu option (Menu 9.1.4).
For further details, see page 73.
Getting Started
25
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes can be changed by using
the Change Codes feature (Menu 9.4.4).
Security code (4 to 8 digits)
The security code protects the unauthorized use of your phone. The default
security code is set to ‘0000’ and the security code is required to delete all
phone entries and to activate the Restore Factory Settings menu. The
security code default setting can be modified from the Security Settings
menu.
Getting Started
26
General Functions
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a number on the
display screen, press the right/left navigation keys to move the cursor to
desired position or simply press the key to erase one digit at a
time.
]
Press and hold the key to erase the entire number.
3. Press the key to call the number.
4. When finished, press the key.
Making a Call by pressing the Send Key
1. Press the key, and the most recent incoming, outgoing and missed
phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press the key.
Making International Calls
1. Press and hold the key for the international prefix. The ‘+’
character can be replaced with the international access code.
2. Enter the country code, area code and the phone number.
3. Press the key.
Ending a Call
When you have finished a call, press the key.
27
Making a Call From the Contact List
You can store names and phone numbers dialed frequently in the SIM card
as well as the phone memory known as the Contact List.
You can dial a number by simply looking up a name in the contact list. For
more details on the Contact List feature, please refer to page 67.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the side keys
of the phone.
In idle mode with the flip cover open, you can adjust the ring volume using
the side keys.
Answering a Call
When you receive a call, the phone rings and the flashing phone icon
appears on the screen. If the caller can be identified, the caller’s phone
number(or name if stored in your Address Book) is displayed.
1. Open the flip and press the key or the left soft key to answer an
incoming call. If the Any Key menu option(Menu 9.3.2) has been set to
, any key press will answer a call except for the key or the right
soft key.
2. End the call by closing the phone or pressing the key.
Notice You can answer a call while using the Address Book or other menu
features.
Notice
]
To reject an incoming call, press and hold the side keys on the left side of
the phone without opening the flip.
]
If the Answer Mode menu option(Menu 9.3.2) is set to flip open, you do not
need to press any key. You can answer the call simply by opening the flip.
General Functions
Vibrate Mode (Quick)
When the flip is opened, Vibrate Mode can be activated by pressing and
holding down key.
Signal Strength
If you are inside a building, being near a window may give you better
reception. You can see the strength of your signal by the signal indicator
( ) on your phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the phone’s keypad. For
example, storing names in the Address Book, writing a message and
creating scheduling events in the calendar all require entering text.
The following text input methods are available in the phone.
T9 Mode
This mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter. The T9 mode
automatically compares your keystrokes with an internal linguistic
dictionary to determine the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled with the
required letter once, twice, three or four times until the letter is displayed.
123 Mode(Numbers Mode)
Type numbers using one keystroke per number. To change to 123 mode in
a text entry field, press key until 123 mode is displayed.
28
General Functions
29
Symbol Mode
This mode allows you to enter special characters.
Changing the Text Input Mode
1. When you are in a field that allows characters to be entered, you will
notice the text input mode indicator in the upper right corner of the
display.
2. If you want to change modes, press and hold down the key. The
available modes are displayed.
3. To switch to Symbol mode, press the key.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily with a
minimum number of key presses. As you press each key, the phone begins
to display the characters that it thinks you are typing based on a built-in
dictionary. As new letters are added, the word changes to reflect the most
likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering a word
by pressing keys to . Press one key per letter.
]
The word changes as letters are typed - ignore what’s on the screen
until the word is typed completely.
]
If the word is still incorrect after typing completely, press the down
navigation key once or more to cycle through the other word options.
Example: Press to type Good
Press [down navigation key] to type
Home
]
If the desired word is missing from the word choices list, add it by
using the ABC mode.
Notice You can select a different T9 language from the menu option. The
default setting on the phone is T9 disabled mode.
General Functions
Loading...