LG 55LY34, 39LY54, 32LY54, 42LY54, 55LY54 Owner's Manual

...
www.lg.com
LY33** LY34** LY54**
Please read this manual carefully before operating your TV and retain it for future reference.
*Disclaimer
OWNER’S MANUAL
LED TV
2
ENG
ENGLISH
TABLE OF CONTENTS
TABLE OF CONTENTS
WARNING
yIf you ignore the warning message, you
may be seriously injured or there is a possibility of accident or death.
CAUTION
yIf you ignore the caution message, you
may be slightly injured or the product may be damaged.
NOTE
yThe note helps you understand and use
the product safely. Please read the note carefully before using the product.
3 LICENSES
3 OPEN SOURCE SOFTWARE
NOTICE
4 ASSEMBLING AND PREPARING
4 Unpacking 6 Separate Purchase 7 Parts and Button 8 - Using the Joystick button 9 Lifting and Moving the TV 10 Setting up the TV 10 - Attaching the stand 11 Mounting on a table 12 Mounting on a wall
14 MAKING CONNECTIONS
14 Antenna Connection 15 Adapter Connection 15 Network Setup 15 - Wired network connection 16 Other Connections
22 REMOTE CONTROL
25 MAINTENANCE
25 Cleaning your TV 25 - Screen, frame, cabinet and stand 25 - Power cord
26 TROUBLESHOOTING
27 SPECIFICATIONS
31 IR CODES
32 EXTERNAL CONTROL DEVICE
SETUP
32 RS-232C Setup 32 Type of Connector:
D-Sub 9-Pin Male 33 RS-232C Configurations 34 Communication Parameters 34 Command Reference List 35 Transmission / Receiving Protocol
3
ENGENGLISH
LICENSES / OPEN SOURCE SOFTWARE NOTICE
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx com for more information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274”
4
ENG
ENGLISH
ASSEMBLING AND PREPARING
NOTE
yImage shown may differ from your TV. yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yThe available menus and options may differ from the input source or product model that you
are using. yNew features may be added to this TV in the future. yThe TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption. yThe energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span. yAny damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model. yProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions. yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
A
B
A
B
*A
<
=
10 mm
*B
<
=
18 mm
5
ENGENGLISH
ASSEMBLING AND PREPARING
Remote control, batteries (AAA)
(See p.22, 23, 24)
Owner’s manual Cable Holder
(Depending on model)
Power cord
(Depending on model)
Stand Screws 4EA, M4 x L14 (Only 42/47/55/60LY34**, 39/42/47/55/60LY54**) (See p.10)
Stand Screws
4EA, M4 x L20 (Only 32LY34**, 32LY54**) (See p.10)
Cable Managements
2EA (Only 32/42/47/55/60LY34**, 32/39/42/47/55/60LY54**)
Wall Mount Spacers
2EA (
Only 42LY34**, 42LY54**)
(See p.13)
Stand Bases
(Only 32/42/47/55/60LY34**, 32/39/42/47/55/60LY54**) (See p.10)
or
Stand Base
(Only 22/28LY33**) (Depending on model & country) (See p.10)
AC-DC Adaptor
(Only 22/28LY33**) (Depending on model & country) (See p.15)
6
ENG
ENGLISH
ASSEMBLING AND PREPARING
Separate Purchase
Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
LG Audio Device
7
ENGENGLISH
ASSEMBLING AND PREPARING
Parts and Button
NOTE
yYou can set the power indicator light to on or off by selecting OPTION in the main menus.
A type : 32/42/47/55/60LY34**,
32/39/42/47/55/60LY54**
B type : 22/28LY33** (Except for India)
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. (Only LY540H) 2 Joystick Button - This button is located below the TV screen.
C type : 22/28LY33** (Only India)
Remote control sensor
Power Indicator
Screen
Speakers
Joystick button
2
Remote Control Sensor
Power Indicator
Screen
Speakers
Joystick Button
2
Remote control and
intelligent sensors
1
(Only LY540H)
Power Indicator
Screen
Speakers
Joystick button
2
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Using the Joystick button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it. (However, if the Menu button is on the screen, pressing and holding the joystick button will let you exit the Menu.)
Volume Control
If you place your finger over the joystick button and move it left or right, you can adjust the volume level you want.
Programmes Control
If you place your finger over the joystick button and move it up or down, you can scrolls through the saved programmes you want.
NOTE
yWhen your finger over the joystick button and push it to the up, down, left or right, be careful
not to press the joystick button. If you press the joystick button first, you can not adjust the
volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( , , , ) moving the joystick button up, down, left or right.
TV Off Turns the power off.
Settings Accesses the main menu.
Close Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
9
ENGENGLISH
ASSEMBLING AND PREPARING
Lifting and Moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yAvoid touching the screen at all times, as
this may result in damage to the screen.
yIt is recommended to move the TV in the
box or packing material that the TV originally came in.
yBefore moving or lifting the TV, disconnect
the power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yHold the top and bottom of the TV frame
rmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yWhen transporting a large TV, there should
be at least 2 people.
yWhen transporting the TV by hand, hold the
TV as shown in the following illustration.
yWhen transporting the TV, do not expose the
TV to jolts or excessive vibration.
yWhen transporting the TV, keep the TV
upright, never turn the TV on its side or tilt towards the left or right.
yDo not apply excessive pressure to cause
exing /bending of frame chassis as it may
damage screen.
CAUTION
yWhen handling the TV, be careful not to
damage the protruding joystick button. (Depending on model)
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
CAUTION
yWhen attaching the stand to the TV, place
the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
1
2
(Only 22/28LY33**)
Stand Base
(Only 32/42/47/55/60LY34**, 32/39/42/47/55/60LY54**)
1
A Stand Base
B Stand Base
1
2
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
2
4EA
M4 x L14 (Only 42/47/55/60LY34**, 39/42/47/55/60LY54**)
M4 x L20 (Only 32LY34**, 32LY54**)
11
ENGENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yDo not place the TV near or on sources
of heat, as this may result in fire or other damage.
WARNING
yIf a television is not positioned in a
sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
»Using cabinets or stands
recommended by the manufacturer of the television.
»Only using furniture that can safely
support the television.
»Ensuring the television is not
overhanging the edge of the supporting furniture.
»Not placing the television on tall
furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
»Not standing the televisions on cloth
or other materials placed between the television and supporting furniture.
»Educating children about the dangers
of climbing on furniture to reach the television or its controls.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye­bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope. Make sure to keep the rope horizontal with
the at surface.
CAUTION
yMake sure that children do not climb on
or hang on the TV.
NOTE
yUse a platform or cabinet that is strong
and large enough to support the TV securely.
yBrackets, bolts and ropes are not
provided. You can obtain additional accessories from your local dealer.
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
Separate purchase(Wall Mounting Bracket)
Model
22LY33** 28LY33**
VESA (A x B)
75 x 75 100 x 100
Standard screw
M4 X L10 M4 X L10
Number of screws
4 4
Wall mount bracket
LSW140B LSW140B
Model
32LY34**
32/39LY54**
42/47/55LY34** 42/47/55LY54**
VESA (A x B)
200 x 200 400 x 400
Standard screw
M6 M6
Number of screws
4 4
Wall mount bracket
LSW240B MSW240
LSW440B MSW240
Model
60LY34** 60LY54**
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW440B
A
B
13
ENGENGLISH
MAKING CONNECTIONS
CAUTION
yDisconnect the power first, and then
move or install the TV. Otherwise electric shock may occur.
yIf you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
yDo not over tighten the screws as this
may cause damage to the TV and void your warranty.
yUse the screws and wall mounts that
meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the manufacturer’s warranty.
yScrew length from outer surface of back
cover should be under 8mm. (Only 22/28LY33**)
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Wall mount Pad
Back Cover
Max.8mm
NOTE
yUse the screws that are listed on the
VESA standard screw specifications.
yThe wall mount kit includes an installation
manual and necessary parts.
yThe wall mount bracket is not provided.
You can obtain additional accessories from your local dealer.
yThe length of screws may differ
depending on the wall mount. Make sure to use the proper length.
yFor more information, refer to the manual
supplied with the wall mount.
yWhen attaching a wall mounting bracket
to the TV, insert the wall mount spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Only 42LY34**, 42LY54**)
Wall Mount Spacers
14
ENG
ENGLISH
MAKING CONNECTIONS
MAKING CONNECTIONS
yImage shown may differ from your TV. yAny separate cable is not provided.
This section on MAKING CONNECTIONS mainly uses diagrams for the 47LY34** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
NOTE
yThe external device connection may differ
from the model.
yConnect external devices to the TV
regardless of the order of the TV port.
yIf you record a TV program on a DVD
recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device.
yRefer to the external equipment’s manual
for operating instructions.
yIf you connect a gaming device to the TV,
use the cable supplied with the gaming device.
yIn PC mode, there may be noise
associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.
yIn PC mode, some resolution settings
may not work properly depending on the graphics card.
yOnly a USB storage device is
recognizable.
Antenna Connection
Connect the TV to a wall antenna socket with an RF cable (75 ).
ANTENNA /
CABLE IN
Wall Antenna Socket
(*Not Provided)
NOTE
yUse a signal splitter to use more than 2
TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image quality.
yIf the image quality is poor with an
antenna connected, try to realign the antenna in the correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
15
ENGENGLISH
MAKING CONNECTIONS
Adapter Connection
(Only 22/28LY33**)
(Depending on model & country)
DC-IN
(19V )
AC-DC Adapter
Power Cord
CAUTION
yPlease be sure to connect the TV to the
AC-DC power adapter before connecting the TV’s power plug to a wall power outlet.
Network Setup
Wired network connection
This TV can be connected to a Pro:Centric server via the LAN port. After making the physi­cal connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
(Only LY54**)
LAN
Broadband Service
Broadband Modem
Broadband Modem
Broadband Service
Router
CAUTION
yDo not connect a modular phone cable to
the LAN port.
ySince there are various connection
methods, please follow the specifications of your telecommunication carrier or internet service provider.
16
ENG
ENGLISH
MAKING CONNECTIONS
ANTENNA/
CABLE IN
1
IN
EXTERNAL
SPEAKER OUT
OPTICAL
DIGITAL
AUDIO OUT
RGB IN (PC)
RS-232C IN (CONTROL & SERVICE)
VOLUME
CONTROL
RGB OUT(PC)
AUDIO OUT
+
-
OPTICAL
AUDIO IN
AUDIO
VIDEO
L R
(MONO)
L
R
RED
WHITE
DVD / Blu-Ray / HD Cable Box
Control port for Speaker out
Digital Audio Systerm
RIGHT
LEFT GND
GND
UP
DOWN
DVD / Blu-Ray / HD Cable Box / VCR
PC
RED
REDRED
RED
BLUE
BLUE
GREEN
GREEN
WHITE
WHITE
RED
RED
YELLOW
YELLOW
WHITE
WHITE
Other Connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Some separate cable is not provided.
(Only 32/39/42/47/55/60LY540H)
Loading...
+ 36 hidden pages