Read these instructions. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
WARNING!
Vi o lati on oof tth e iin stru c tion s mma y cca u se sse riou s ii n jury oor dde ath.
1. Never use an unapproved battery since this could damage the phone and/or battery and could
cause the battery to explode.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than -4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If
wireless equipment is improperly installed and the air bag is deployed, you may be seriously
injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
IMPORTANT SAFETY PRECAUTIONS
1
Page 4
IMPORTANT SAFETY PRECAUTIONS
IMPORTANT SAFETY PRECAUTIONS
2
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the
phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if
it is loose as it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as
it may cause electric shock or fire.
7. Do not handle the phone with wet hands while it is being charged. It may cause an electric
shock or seriously damage your phone.
8. Do not disassemble the phone.
Page 5
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or
cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
4. Give instructions for children to use the battery carefully.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection
parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in serious injury
or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
9. An emergency call can be made only within a service area. For an emergency call, make sure that
you are within a service area and that the phone is turned on.
IMPORTANT SAFETY PRECAUTIONS
3
Page 6
TABLE OF CONTENTS
Important Safety Precautions 1
TABLE OF CONTENTS
Table of Contents4
Welcome9
Technical Details10
FCC RF Exposure Information11
Phone Overview12
Menus Overview14
Menu Access16
Getting Started with Your
Phone17
The Battery17
Installing the Battery17
Removing the Battery17
Charging the Battery17
4
Battery Charge Level17
Turning the Phone On18
Turning the Phone Off18
Screen Icons18
Making Calls19
Redialing Calls19
Receiving Calls19
Quick Access to Convenient
Features20
Manner mode20
Lock Mode20
Mute Function20
Volume Quick Adjustment20
Call Waiting21
Caller ID21
Speed Dialing 21
Entering and Editing
Information22
Text Input22
Key Functions22
T9Word (T9) Mode22
Abc (Multi-tap) Mode22
123 (Numbers) Mode22
Symbols Mode23
Changing Letter Case23
Text Input Examples23
Using Abc (Multi-tap) Text Input23
Using T9 Mode Text Input23
Using the NEXT Key (In T9 Mode) 24
Adding Words to the T9 Database 24
Contacts in Your Phone’s
Memory25
The Basics of Storing Contacts
Entries25
Page 7
Options to Customize Your
Contacts25
Adding or Changing the Group25
Changing the Call Ringer26
Adding or Changing the Memo26
Adding or Changing the Picture ID 26
Adding Speed Dial27
Adding Another Phone Number27
From standby mode27
Changing the Default Number27
Editing Stored Phone Numbers28
Editing Stored Names28
Editing Customized Options28
Deleting29
Deleting a Contact Entry or a Phone
Number from a Contact29
Additional Ways to Delete a Contact 29
Deleting a Speed Dial29
Phone Numbers With Pauses29
Storing a Number with Pauses30
Adding a Pause to an Existing
Number30
Searching Your Phone’s Memory31
Scrolling Through Your Contacts31
Searching by Letter31
Searching Options31
Making a Call From Your Phone’s
Memory32
From Contacts32
From Recent Calls32
Speed Dialing32
Using Phone Menus33
Messaging33
1. New Text Message34
2. New Photo Message36
3. Inbox 38
4. Sent39
5. Drafts40
6. Voice Mail40
7. Settings41
7.1 Auto Save41
7.2 Auto Delete41
7.3 Text-Auto View41
7.4 Photo-Auto Receive41
7.5 Text-Callback #41
7.6 Voice Mail # 41
7.7 Entry Mode41
7.8 Quick Text 41
7.9 Text-Auto Play42
7.0 Text-Signature42
7.* 2-Min Reminder42
8. Delete All 42
TABLE OF CONTENTS
5
Page 8
TABLE OF CONTENTS
Brew43
1. Brew Apps44
TABLE OF CONTENTS
2. Get Information 44
Web45
1. Start Browser45
2. Web Messages 47
3. Web Settings 47
Multimedia48
1. Take Photo48
2. Take Video49
3. Record Voice50
4. Photo Gallery50
5. Video Gallery50
6. Voice Clip50
Contacts51
1. Contacts51
6
2. New Contact52
3. Groups52
4. Speed Dials53
Call History54
1. Missed Calls54
2. Dialed Calls55
3. Received Calls 55
4. All Calls55
5. Call Timer55
6. Data Count55
My Media56
1. Images56
2. Videos56
3. Sounds56
4. Message Objects57
Tools58
1. Voice Command58
2. My Menu59
3. Alarm Clock59
4. Calendar60
5. Tip Calculator60
6. Notepad60
7. Calculator61
8. World Clock61
9. Stopwatch61
Settings62
1. Sound62
1.1 Ringers62
1.2 Key Tone62
1.3 Flip Tone63
1.4 Volume63
1.5 Message Alerts Tones63
Page 9
1.6 Service Alerts63
1.6.1 Service Change63
1.6.2 Minute Beep63
1.6.3 Call Connect64
1.6.4 Back To Top64
1.7 Power On/Off Tones64
2. Display64
2.1 Screens64
2.2 Banner 65
2.3 Backlight 65
2.4 Menu Style65
2.5 Languages65
2.6 Clocks & Calendar65
2.7 Calling Fonts66
2.8 Color Schemes66
3. System66
3.1 System Select 66
3.2 Set NAM66
3.3 Auto NAM67
3.4 Serving System67
3.4 Force Call67
4. Security67
4.1 Lock Phone67
4.2 Restrict Calls68
4.3 Emergency #s 68
4.4 Change Lock Code68
4.5 Reset Default69
5. Call Setup69
5.1 Auto Retry69
5.2 Answer Call69
5.3 Auto Answer70
5.4 One-Touch Dial70
5.5 Voice Privacy70
5.6 Auto Volume 70
5.7 Application Mode71
5.8 TTY Mode71
6. Data Settings71
6.1 PC Connection71
6.2 Mode (1X/QNC)72
6.3 PPP ID72
6.4 PPP Password72
7. Bluetooth72
7.1 Paired Devices73
7.2 Power73
7.3 My Visibility74
7.4 My Bluetooth Name74
7.5 My Bluetooth Info74
8. Location74
9. Phone Info.75
1. My Number75
2. SW Version75
3. Icon Glossary75
4. Memory Status75
TABLE OF CONTENTS
7
Page 10
TABLE OF CONTENTS
Safety76
TABLE OF CONTENTS
TIA Safety Information76
Exposure to Radio Frequency Signal 76
Antenna Care76
Phone Operation76
Tips on Efficient Operation77
Driving77
Electronic Devices77
Pacemakers77
Persons with pacemakers:77
Hearing Aids78
Other Medical Devices78
Health Care Facilities78
Vehicles78
Posted Facilities78
Aircraft78
Blasting Areas78
Potentially Explosive Atmosphere79
8
For Vehicles Equipped with an Air Bag79
Safety Information79
Charger and Adapter Safety79
Battery Information and Care79
Explosion, Shock, and Fire Hazards 80
General Notice80
Avoid damage to your hearing81
FDA Consumer Update82
10 Driver Safety Tips89
Consumer Information on
SAR 91
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices93
Accessories95
Limited Warranty Statement 96
Index99
Page 11
WELCOME
Thank you for choosing the advanced and compact
LG355 cellular phone, designed to operate with the
latest digital mobile communication technology, Code
Division Multiple Access (CDMA) and Advanced
Mobile Phone Service (AMPS). Along with the many
advanced features of the CDMA system, this phone
offers:
●
Significantly enhanced voice clarity
●
Large, easy-to-read, 9-line backlit LCD with status
icons
●
Paging, messaging, voice mail, and caller ID.
●
24-key keypad.
●
Speakerphone feature.
●
Menu-driven interface with prompts for easy
operation and configuration.
●
Any key answer, auto answer, auto retry, one-touch
and speed dialing with 99 memory locations.
●
Bilingual (English and Spanish) capabilities.
●
Bluetooth®wireless technology.
Note
The Bluetooth®word mark and logos are owned
by Bluetooth SIG, Inc. and any use of such marks
by LG Electronics is under license. Other
trademarks and trade names are those of their
respective owners.
Important Information
This user’s guide provides important information on
the use and operation of your phone. Please read all
the information carefully prior to using the phone for
the best performance and to prevent any damage to
or misuse of the phone. Any unapproved changes or
modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of
FCC rules. Operation is subject to the following two
conditions: (1) This device and its accessories may not
cause harmful interference, and (2) this device and its
accessories must accept any interference received,
including interference that causes undesired operation.
Technical Details
The LG355 is a tri-mode phone that operates on both
(Code Division Multiple Access CDMA) frequencies:
cellular services at 800 MHz and (Personal
Communication Services PCS) at 1.9 Ghz. Also, the
LG355 works on Advanced Mobile Phone Service. We
call it a tri-mode phone. Since the phone operates on
Cellular, PCS and AMPS, the call fail rate is less than on
a conventional dual-mode or single-mode phone.
WELCOME
9
Page 12
TECHNICAL DETAILS
10
CDMA technology uses a feature called DSSS
(Direct Sequence Spread Spectrum) that enables
the phone to keep communication from being
crossed and to use one frequency channel by
multiple users in the same specific area. This
TECHNICAL DETAILS
results in a 10-fold capacity increase when
compared with analog mode. In addition, features
such as soft/softer handoff, hard Handoff, and
dynamic RF power control technologies combine
to reduce call interruptions.
The Cellular and PCS CDMA networks consist
of MSO (Mobile Switching Office), BSC (Base
Station Controller), BTS (Base Station
Transmission System), and MS (Mobile Station).
* TSB-74: Protocol between an IS-95A system
and ANSI J-STD-008
1xRTT system receives twice as many
subscribers in the wireless section as IS-95. Its
battery life is twice as long as IS-95. Highspeed data transmission is also possible.
The following table lists some major CDMA
standards.
14.4kbps radio link protocol and
inter-band operations
IS-95 adapted for PCS frequency
band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
MAS-BS
PCSC-RS
Intersystem operations
Nom-signaling data comm.
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
Page 13
FCC RF Exposure Information
WARNING! Read this information before operating
the phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its action in
Report and Order FCC 96-326, adopted an updated
safety standard for human exposure to Radio Frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies.
The design of this phone complies with the FCC
guidelines and these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the
body. To comply with FCC RF exposure requirements,
a minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and the
back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters,
and similar accessories containing metallic
components should not be used. Avoid the use of
accessories that cannot maintain 0.6 inches (1.5 cm)
distance between the user’s body and the back of the
phone and have not been tested for compliance with
FCC RF exposure limits.
TECHNICAL DETAILS
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20cm) must be
maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC RF
exposure requirements. For more information about
RF exposure, visit the FCC website at www.fcc.gov.
Caution
Use only the supplied and approved antenna. Use
of unauthorized antennas or modifications could
impair call quality, damage the phone, void your
warranty and/or result in violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin
a minor burn may result. Contact your local dealer
for a replacement antenna.
11
Page 14
PHONE OVERVIEW
Earpiece
Camera Lens
Flash
Earphone Jack
PHONE OVERVIEW
12
LCD Screen
Flip
Left Soft Key
My Menu Key
Side Keys
SEND Key
BACK Key
Voice Command Key
Manner Mode Key
Outside Display
Navigation Keys
Right Soft Key
Charger Port
Camera Key
END/PWR Key
Alphanumeric Keypad
Lock Mode Key
Microphone
Page 15
Earpiece Lets you hear the caller.
Flip Open the case to answer an incoming call and
close to end the call.
LCD Screen Displays messages and indicator icons.
Left Soft Key Use to display the function setting menu.
My Menu Key Use for quick access the menus you
set as shortcut.
Side Keys Use to adjust the ringer volume in standby
mode and the earpiece volume during a call.
SEND Key Use to place or answer calls.
BACK Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key
once in a menu to go back one level.
Voice Command Key Use for quick access to Voice
Command.
Manner Mode Key Use to set the Manner mode
(from standby mode press and hold for about
3 seconds).
Navigation Key Use for quick access to Messages,
Scheduler, Speaker on/off mode.
Right Soft Key Use to select an action within a
menu.
Camera Key Use for quick access to Camera
function.
END/PWR Key Use to turn the power on/off and to
end a call. Also use to return to the main menu
display screen.
Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
Lock Mode Key Use in standby mode to set the lock
function by pressing and holding the key for
about 3 seconds.
Microphone Lets callers hear you.
Camera Lens
Projects the object when taking a picture.
Flash
Earphone Jack
Outside Display Displays the inner LCD screen.
Charger Port Connects the charger to the phone.
PHONE OVERVIEW
13
Page 16
MENUS OVERVIEW
MENUS OVERVIEW
14
Messaging
1. New Text Message
2. New Photo Message
3. Inbox
4. Sent
5. Drafts
6. Voice Mail
7. Settings
1. Auto Save
2. Auto Delete
3. Text-Auto View
4. Photo-Auto Receive
5. Text-Callback #
6. Voice Mail #
7. Entry Mode
8. Quick Text
9. Text-Auto Play
0. Text-Signature
*. 2-Min Reminder
8. Delete All
1. Inbox
2. Sent
3. Drafts
4. All
Brew
1. Brew Apps
2. Brew Info
Web
1. Start Browser
2. Web Messages
3. Web Alerts
Multimedia
1. Take Photo
2. Take Video
3. Record Voice
4. Photo Gallery
5. Video Gallery
6. Voice Clip
Contacts
1. Contacts
2. New Contact
3. Groups
4. Speed Dials
5. My Contact Info
Call History
1. Missed Calls
2. Dialed Calls
3. Received Calls
4. All Calls
5. Call Timer
1. Last call
2. Home calls
3. Roam calls
4. All calls
6. Data Count
1. Transmitted
2. Received
3. Total
Page 17
My Media
1. Images
2. Videos
3. Sounds
4. Message Objects
Tools
1. Voice Command
2. My Menu
3. Alarm Clock
4. Calendar
5. Tip Calculator
6. Notepad
7. Calculator
8. World Clock
9. Stopwatch
Settings
1. Sound
1. Ringers
2. Key Tone
3. Flip Tone
4. Volume
5. Message Alert
Tones
6. Service Alerts
7. Power On/Off Tones
2. Display
1. Screens
2. Banner
3. Backlight
4. Menu Style
5. Languages
6. Clocks & Calendar
7. Calling Fonts
8. Color Schemes
3. System
1. System Select
2. Set NAM
3. Auto NAM
4. Serving System
5. Force Call
4. Security
1. Lock Phone
2. Restrict Calls
3. Emergency #s
4. Change Lock Code
5. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. Application Mode
8. TTY Mode
6. Data Settings
1. PC Connection
2. Mode(1X/QNC)
3. PPP ID
4. PPP Password
7. Bluetooth
1. Paired Devices
2. Power
3. My Visibility
4. My Bluetooth Name
5. My Bluetooth Info
8. Location
1. Location on
2. E911 only
9. Phone Info.
1. My Number
2. SW Version
3. Icon Glossary
4. Memory Status
MENUS OVERVIEW
15
Page 18
MENUS OVERVIEW
MENUS OVERVIEW
16
Menu Access
Press Left Soft Key
menus. There are two methods of accessing menus
and submenus:
●
Use the navigation key to highlight and select, or
●
Press the number key that corresponds to the
menu (or submenu).
For example:
1. Press Left Soft Key
menu items.
Use to scroll through the list of menus.
2. Press the appropriate number key corresponding
to the menu item you want to select.
The sub-menu list will be displayed.
3. Press the appropriate number key corresponding
to the sub-menu you want to access.
4. Use to highlight your preferred setting, then
press to select it.
Menu
to access nine phone
Menu
to display nine
Note
Press to go back one step (while accessing
a menu or selecting a setting). Changes to
settings will not be saved.
Page 19
GETTING STARTED WITH YOUR PHONE
The Battery
Note
It is important to fully charge the battery before
initial use of the phone.
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Installing the Battery
To install the battery, insert the battery into the
opening on the back of the phone. Put the battery
cover on the battery and push it slightly upwards.
Removing the Battery
Turn the power off. Press the Push button at the back
of the phone. Pull the battery cover downward and
remove it. Then remove the battery by pressing the
upper area of it.
Charging the Battery
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the LG355 may damage your phone or battery..
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet.
2. The charge time varies depending upon the
battery level.
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
battery icon, and displaying Low Battery. If the
battery charge level becomes exceedingly low, the
phone automatically switches off and any function in
progress is not saved.
EmptyFully Charged
GETTING STARTED WITH YOUR PHONE
17
Page 20
GETTING STARTED WITH YOUR PHONE
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the phone to
2. Press for about 3 seconds until the LCD
GETTING STARTED WITH YOUR PHONE
Note
Like any other radio device, avoid contact with
the antenna while your phone is on.
Turning the Phone Off
1. Press and holduntil the display turns off.
18
an external power source such as a cigarette lighter
charger or hands-free car kit.
screen lights up.
Signal Strength
Call quality depends on the signal strength in your
area. The signal strength is indicated on the screen
as the number of bars next to the signal strength
icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If
you are in a building, the reception may be better
near a window.
Screen Icons
To see the icon glossary, go to
->
Icon Glossary
on your phone.
Menu
->
Phone Info.
Page 21
Making Calls
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
2. Enter the phone number (include the area code if
needed).
3. Press .
lf the phone is locked, enter the lock code.
Note
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or
your Contacts. To turn off this function:
Menu ->
Lock Code
4. Press to end the call.
Settings
->
->
Restrict Calls
Security
->
Off
->
->
Enter
OK
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold
down for at least 2 seconds to go to the
standby mode.
Redialing Calls
1. Press twice to redial the last number you
dialed. The last 30 numbers (dialing, incoming,
missed for each) are stored in the call history list
and you can also select one of these to redial.
Receiving Calls
1. When the phone rings or vibrates, press to
answer.
Note
If you press or (the side keys) while the
phone is ringing, the ringing or vibration is muted
for that call.
2. Press twice to end the call.
GETTING STARTED WITH YOUR PHONE
19
Page 22
QUICK ACCESS TO CONVENIENT FEATURES
Manner mode
Sets the phone to vibrate instead of ring (is
displayed). To quickly set Manner mode press and
hold . To return to Normal Mode, press and
hold .
Lock Mode
Sets your phone to require your 4-digit password in
order to use the phone.
QUICK ACCESS TO CONVENIENT
FEATURES
Note
Until you change it, the lock code/password is
the last 4 digits of your phone number.
To quickly lock your phone press for three
seconds. To cancel, press Right Soft Key
[Unlock] and enter the password.
20
Mute Function
The Mute Function doesn’t transmit your voice to the
caller. To quickly activate Mute press Left Soft Key
[Mute], then to cancel press Left Soft Key [Unmute].
Volume Quick Adjustment
Use the side keys to adjust the earpiece and ringer
volumes. The upper key increases the volume and the
lower key decreases the volume.
●
Earpiece volume can be adjusted during a call.
Ringer volume can be adjusted during a call.
Note
Key Tone Volume is adjusted through the Sounds
Volume (Menu -> 9 -> 1 -> 4 -> 2).
Page 23
Call Waiting
Your cellular service may offer call waiting. While a
call is in progress, two beeps indicate another
incoming call. When call waiting is enabled, you may
put the active call on hold while you answer the
other incoming call. Check with your cellular service
provider for information about this function.
1. Press to receive a waiting call.
2. Press again to switch between calls.
Caller ID
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in Contacts,
the name appears with the number. Check with your
service provider to ensure they offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you
to make phone calls quickly and easily with a few
keystrokes. Your phone recalls the number from your
Contacts, displays it briefly, and then dials it. Speed
Dial Number 1(Unchangeable) is assigned to Voice
Mailbox by default, but you can change it.
Dialing Single Digit Speed Dials (from 2 to 9)
Press and hold the Speed Dial number.
OR
Enter the speed dial number and press .
Dialing Double Digit Speed Dials (from 10 to 99)
Press the first digit and then press and hold the
key of the last digit.
OR
Enter the first and second digits and press .
QUICK ACCESS TO CONVENIENT
FEATURES
21
Page 24
ENTERING AND EDITING INFORMATION
Text Input
You can input and edit your Banner, Schedule,
Contacts, Notepad, and Messaging.
Key Functions
Left Soft Key:
Press to scroll through the following text input
modes: T9Word (T9WORD/T9Word/
T9word) -> Abc (ABC/Abc/abc) -> 123 ->
Symbols.
ENTERING AND EDITING
INFORMATION
Shift: Press to change case.
T9 text : T9Word -> T9WORD -> T9word
Abc text : Abc -> ABC -> abc
Next : In T9 mode, press to display other
matching words.
Space : Press to complete a word and insert a
space.
Clear : Press to delete a single space or
character. Hold to delete the whole message.
22
Punctuation : In T9 mode, press to
insert punctuation in a word and complete a
sentence.
Text Input Modes
There are five modes for entering text, numbers,
special characters, and punctuation. In a text entry
field, pressing Left Soft Key displays a pop-up
list of text modes.
T9Word (T9) Mode
Use to type text using one keystroke per letter. The
phone translates keystrokes into common words by using
the letters on each key and a compressed database.
Abc (Multi-tap) Mode
Use to add words to the T9 database.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
Page 25
Symbols Mode
Use to insert special characters or punctuation.
There are 38 special characters including “SP” which
inserts a space and “LF” which forces the text to the
next line.
Changing Letter Case
Using T9 and Abc text input modes you can set the
capitalization. Press to reach the following:
Initial Cap (T9Word/ Abc)
Only the first letter is capitalized and subsequent
letters are lower case.
Caps Lock (T9WORD/ ABC)
All letters are capitalized.
Lower Case (T9word/ abc)
All letters are in lower case.
Text Input Examples
Display the text modes and select a text mode:
1. In a text entry field, press Right (or Left) Soft Key
to display text modes.
2. Press to use the text input mode you want to
use.
3. Press to select the text input mode.
Using Abc (Multi-tap) Text Input
1. Press Left Soft Key to change to Abc mode.
2. Press to change to ABC Caps Lock every
time for capital letters.
3. Press .
LG is displayed.
Using T9 Mode Text Input
1. Press Left Soft Key to change to T9Word
mode.
2. Press .
3. Press to complete the word and add a space.
ENTERING AND EDITING
INFORMATION
23
Page 26
ENTERING AND EDITING INFORMATION
4. Press
Call the office. is displayed.
Using the NEXT Key (In T9 Mode)
After you have finished entering a word, if the word
displayed is not the one you want, press to
display additional choices of words from the
database.
1. Press .
ENTERING AND EDITING
INFORMATION
Good is displayed.
2. Press .
The display gives you additional choices such as:
Home, Gone, Hood, etc.
24
Adding Words to the T9 Database
.
If a word is not in the T9 database, add it using Abc
(Multi-tap) mode text entry.
1. Press Left Key to change to Abc (multi-tap)
mode.
2. Press .
bop is displayed.
3. Press Left Soft Key to change to T9 mode to
add the word bop to the T9 database.
4. Press to erase the existing word.
5. Press .
Cop is displayed.
Page 27
CONTACTS IN YOUR PHONE’S MEMORY
Contacts Entries
This allows you to have easy access to your most
frequently dialed phone numbers. You may store up
to 500 entries with up to 5 phone numbers each.
Each entry may be up to 22 characters.
The Basics of Storing Contacts Entries
1. From standby mode enter the phone number you
want to save (up to 48 digits).
2. Press Left Soft Key [Save].
3. Select either New contact or Update contact.
4. Use to highlight a Label and press .
Mobile 1/ Home/ Work/ Mobile 2/ Fax
Note
Use
Update contact
number to a contact already stored in memory.
5. Enter a name for the phone number (up to 22
characters) and press .
A confirmation message is displayed briefly.
to add another phone
Options to Customize Your Contacts
Once the basic phone number and name information
is stored in your Contacts, you can edit and
customize each entry.
1. Press Right Soft Key
to highlight the contact entry you want to edit,
then press
2. Press Left Soft Key
Contact screen.
3. Use to highlight the information you want to
customize, then press.
4. press[Save] when it's done.
Adding or Changing the Group
Allows you to manage your Contacts entries by
organizing them into groups.
1. Press Right Soft Key
to highlight an entry, then press .
2. Press Left Soft Key
[View]
Contacts
.
Edit
Contacts
Edit
and use
to access the Edit
and use
.
PHONE’S MEMORY
25
CONTACTS IN YOUR
Page 28
PHONE’S MEMORY
26
3. Use to highlight
group.
4. Use to select the Group, then press.
No Group
No Group/ Family/ Friends/ Colleagues
Business/ School
5. Press [Save] to save the change.
Changing the Call Ringer
Allows you to identify who is calling, by setting
different ringers for different phone numbers in your
Contacts. It is automatically set to the default ringer
when the Contact is saved.
CONTACTS IN YOUR
1. Press Right Soft Key
to highlight an entry, then press .
2. Press Left Soft Key Edit.
3. Use to highlight Ringtone, then press Left
Soft Key Set.
4. Use to select one of the Ringtone available,
then press .
5. Press [Save] to save the change.
Contacts
, to select a
/
and use
Adding or Changing the Memo
Allows you to enter up to 32 characters as a memo
to the Contact entry.
1. Press Right Soft Key
to highlight an entry, then press .
2. Press Left Soft Key
3. Use to highlight
4. Enter text.
5. Press [Save] to save the change.
Contacts
Edit
Memo
and use
.
.
Adding or Changing the Picture ID
Allows the phone to display an image to identify the
caller.
1. Press Right Soft Key
to highlight an entry, then press .
2. Press Left Soft Key
3. Use to highlight Photo.
4. Press Left Soft Key
choices.
Contacts
Edit
.
[Set]
to see additional
and use
Page 29
5. Use to select one of the images available,
then press .
6. Press Left Soft Key
7. Press [Save] to save the change.
Select
.
Adding Speed Dial
1. Press Right Soft Key
to highlight an entry, then press .
2. Press Left Soft Key
3. Use to highlight the phone number you want
to set with a Speed Dial, then press Right Soft Key
[Options].
4. Select Set speed dial.
Contacts
Edit
.
and use
[Save]
2. Press Left Soft Key
3. Select Update contact.
4. Use to highlight the existing Contact entry,
then press .
5. Use to highlight a Label, then press .
.
Mobile1/ Home/ Work/ Mobile2/ Fax
6. Press to save Contact.
Default Numbers
The phone number saved when a Contact is created
is the Default Number. If more than one number is
saved in a Contact entry, another number can be
designated as the Default Number.
PHONE’S MEMORY
CONTACTS IN YOUR
Editing Contacts Entries
Adding Another Phone Number
From standby mode
1. From standby mode enter the phone number you
want to save (up to 48 digits).
Changing the Default Number
1. Press Right Soft Key
Contacts alphabetically.
2. Use to highlight the
to edit, then press .
Contacts
Contact
to display your
entry you want
27
Page 30
CONTACTS IN YOUR PHONE’S MEMORY
PHONE’S MEMORY
28
3. Press Left Soft Key
4. Use to highlight the phone number you want
to set as the Default Number, then press Right
Soft Key
Options
Edit
and
.
Editing Stored Phone Numbers
1. Press Right Soft Key
Contacts alphabetically.
2. Use to highlight the Contact entry you want
to edit, then press .
3. Press Left Soft Key
CONTACTS IN YOUR
4. Use to highlight the phone number.
5. Edit the phone number as necessary, then press
.
Contacts
Edit
.
Editing Stored Names
1. Press Right Soft Key [Contacts] to display
your Contacts alphabetically.
2. Use to highlight the Contact entry you want
to edit, then press .
Set as Default
to display your
3. Press Left Soft Key [Edit].
4. Use to highlight the name.
5. Edit the name as necessary, then press .
.
6. Press [Save] to save the change.
Editing Customized Options
Edit any of the Contacts options in the same manner
as when the Contact is created.
1. Press Right Soft Key [Contacts] to display
your Contacts alphabetically.
2. Use to highlight the Contact entry you want
to edit, then press .
3. Press Left Soft Key [Edit].
4. Use to highlight the information you want to
customize.
5. Edit the information as necessary.
6. Press [Save] to save the change.
Page 31
Deleting
Deleting a Contact Entry or a Phone Number
from a Contact
1. Press Right Soft Key
Contacts alphabetically.
2. Use to highlight the
press .
3. Press Right Soft Key
4. Select
5. Select
A confirmation message is displayed.
Delete contact
Ye s
Additional Ways to Delete a Contact
At any time when your Contacts are displayed, the
Right Soft Key
highlighted entry.
.
Options
Contacts
Options
to display your
Contact
entry, then
.
.
allows you to erase the
Deleting a Speed Dial
1. Press Right Soft Key
Contacts alphabetically.
2. Use to highlight the Contact entry, then
press .
3. Press Left Soft Key
4. Use to highlight the number.
5. Press Right Soft Key
6. Press
7. Press
A confirmation message is displayed.
Remove speed dial
Ye s
.
Contacts
Edit
.
Options
to display your
.
.
Phone Numbers With Pauses
When you call automated systems such as voice mail
or credit billing numbers, you often have to enter a
series of numbers. Instead of entering these numbers
by hand, you can store the numbers in your Contacts
separated by special pause characters (P, T). There
are two different types of pauses you can use when
storing a number:
PHONE’S MEMORY
29
CONTACTS IN YOUR
Page 32
CONTACTS IN YOUR PHONE’S MEMORY
PHONE’S MEMORY
30
Wait(W)
The phone stops dialing until you press Left Soft Key
Release to advance to the next number.
Pause(P)
The phone waits 2 seconds before sending the next
string of digits.
Storing a Number with Pauses
1. Press Left Soft Key
2. Press
CONTACTS IN YOUR
3. Press
4. Enter the name (up to 22 characters) and enter a
number.
5. Press Right Soft Key
sec pause
6. Enter additional number(s) then press .
Contacts
New Contact
.
Menu
.
.
.
[Options] and select 2-
Adding a Pause to an Existing Number
1. Press Right Soft Key
Contacts alphabetically.
2. Use to highlight the Contact entry to edit,
then press .
3. Press Left Soft Key
4. Use to highlight the number.
5. Press Right Soft Key
6. Press
7. Enter additional number(s), then press .
Wait
or
Contacts
Edit
.
Options
Pause
to display your
.
.
Page 33
Searching Your Phone’s Memory
The LG355 phone is able to perform a dynamic
search of the contents in your phone’s memory. A
dynamic search compares entered letters or numbers
against the entries in your Contacts. A matching list
is displayed in descending order. You can then select
a number from the list to call or edit. There are
several ways to search:
●
Scrolling Alphabetically
●
Searching by Letter
Scrolling Through Your Contacts
1. Press Right Soft Key
Contacts alphabetically.
2. Use to scroll through the list.
Searching by Letter
1. Press Right Soft Key
Contacts alphabetically.
2. Press (or press repeatedly) the key on the keypad
that corresponds with the search letter.
Contacts
Contacts
to display your
to display your
Searching Options
1. Press Right Soft Key
2. Press Right Soft Key
Contacts
Options
.
.
3. Select the search criteria (use then press ,
or press the corresponding number on the keypad):
Send message
- Send a text message or photo
message to the selected contact.
Delete
- Delete the selected entry in your
Contacts.
Edit
- Edit the selected contact information.
Call
- Make a call to the selected contact.
Send via Bluetooth
Bluetooth
via
notice pops up to turn
Delete all
Cancel
- Deletes all contacts.
- Cancels editing your contacts.
- Send a contact(vCard)
. In case
Bluetooth
Bluetooth
is not on, a
on.
PHONE’S MEMORY
31
CONTACTS IN YOUR
Page 34
CONTACTS IN YOUR PHONE’S MEMORY
PHONE’S MEMORY
32
Making a Call From Your Phone’s Memory
Once you have stored phone numbers in your
Contacts, you can place calls to those numbers
quickly and easily.
●
By pressing after searching for a phone
number in Contacts or Recent Calls and
highlighting it.
●
By using Speed Dialing
From Contacts
1. Press Right Soft Key
CONTACTS IN YOUR
Contacts alphabetically.
2. Use to select the Contact entry, then press
.
3. Use to select the phone number.
4. Press to place the call.
Contacts
to display your
From Recent Calls
1. Press Left Soft Key
2. Press
3. Use to select the type of recent call, then
press .
Call History
Menu
.
.
Missed Calls/ Dialed Calls/ Received Calls/ All
Calls
4. Use to select the phone number.
5. Press to place the call.
Speed Dialing
For a single-digit Speed Dial, press and hold the digit
or press the digit, then press . For a double-digit
Speed Dial, press the first digit and hold the second
digit or press the first and second digits, then press
.
Page 35
CONTACTS
USING PHONE MENUS
Messaging
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Messaging
Menu
.
.
New Text Message
1.
text message.
2.
New Photo Message
photo message.
3.
Inbox
: Shows the list of
received messages.
4.
Sent
: Shows the list of sent
messages.
5.
Drafts
: Shows the list of saved
and draft messages.
6.
Voice Mail
of messages in voice mail box.
7.
Settings
: Sets the way of
sending and receiving
messages.
8.
Delete All
messages.
: Sends a
: Sends a
: Shows the number
: Deletes all stored
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
●
Check types of messages by pressing the message
key .
●
Make a call to the callback number by pressing
during an Inbox message check.
●
Read and edit messages saved in the outbox after
transmission and resend them.
The phone can store up to 385 messages (50 inbox
text messages, 50 photo messages, 100 photo
notification messages, 50 text outbox messages, 50
photo messages, 15 text draft messages, 15 photo
draft messages). The LG355 supports up to 160
characters per message up to 10 supported by EMS
including header information. The information stored
in the message is determined by phone mode and
service capability. Other limits to available characters
per message may exist. Please check with your service
provider for system features and capabilities.
CONTACTS
33
Page 36
MESSAGING
MESSAGING
34
New Message Alert
There are three ways your phone alerts you to new
messages.
1. The phone displays a message on the screen.
2. One of eight ring types is heard, if selected.
3. 2 min reminder
Note
If you receive the same message twice, your
phone deletes the older one and the new one is
stored as a Duplicate.
1. New Text Message
Allows you to send text messages, EMS messages,
pages, and e-mail transmissions. Each message has a
destination (Address 1) and information (Message).
These are dependent upon the type of message you
want to send.
The Basics of Sending a Text Message
1. Press Left Soft Key , , .
2. Enter the recipient's address, then press .
3. Press to access the message screen.
4. Type your message (text or e-mail), then press
.
5. Press Send.
A confirmation message is displayed.
Page 37
Customizing the Text Message Using Options
1. Create a new message.
Options
2. Press Right Soft Key
3. Select the option(s) to customize.
Contacts
Recent calls
Group
Contacts to select a recipient
from your Contacts list.
Recent calls to select a
recipient from your Recent
calls.
Group to select a recipient
from your Group.
.
Family/ Friends/ Colleagues
Business/ School/ No Group
Cancel
4. Complete and send the message.
Cancels editing your message.
Text Options
While you are composing your message you can
insert customized text.
1. Create a new message.
2. Use to highlight Message, and then press .
3. Press Right Soft Key
4. Select the option(s) to customize.
Options
AddQuick text/ Signature
Save as draft
Save your message as draft.
Priority LevelNormal/ Urgent
Callback #On
/
Delivery noticeEnhanced
Cancel
5. Complete and send or save the message.
/
Off/ Edit
/
Normal
Cancels editing your message.
.
MESSAGING
35
Page 38
MESSAGING
MESSAGING
36
Message Icon Reference
Text Message
Multi EMS delivered
Failed Multi SMS/EMS
Multi Msg Pending
Multi SMS/EMS in transfer
Read urgent text message
Sent SMS/EMS
Lock
Delivered EMS
Failed SMS/EMS
Sent Message
Read SMS/EMS
Unread
Unread_Urgent
2. New Photo Message
Allows you send messages with Text, Picture and Sound.
1. Press Left Soft Key , , .
2. Search the destination by scrolling your Contacts,
Photo Place and Recent Call after pressing Left
Soft Key [Contacts].
3. Enter the recipient's address, then press .
4. Enter the Subject, then press .
5. Press to access the message screen.
6. Type your message (text or e-mail), then press .
7. With the highlight on
[Photo/Video]
, press .
8. Use to highlight a picture, then press Left
Soft Key
Add
.
9. With the highlight on [Sounds], press .
10. Use to highlight a sound, then press .
Or you can record your voice memo by pressing Left
Soft Key [Add] and send it with your message.
Options
11. Press Right Soft Key
.
12. Select the option(s) to customize.
Page 39
* Editing Receiver
Contacts/ Online Album/ Recent calls/ Group
Cancel
* Editing Text
Preview
Shows your message before sending.
AddQuick text/ Signature
Save as draft
Saves your message as draft.
Priority levelNormal/ Urgent
Delivery notice
Informs you that the message has
been successfully delivered to the
recipient.
Enhanced/ Normal
RemovePhoto/Video
Cancel
Cancels the contents of message field.
/
Sound
* Editing Photo/ Video
Preview/ Take photo/ Take video/ Save as draft
Priority level/ Delivery notice/ Remove/ Cancel
* Editing Sounds
Preview/ Record voice
level
/
Delivery notice/ Remove/ Cancel
/ S
ave as draft/ Priority
* Editing Subject
/
Preview/ Add
/ S
ave as draft/ Priority level
/
Delivery notice/ Remove/ Cancel
14. Complete and send the message.
Message Icon Reference
Photo Message
Read Photo Message
Unread Photo Message
Read Urgent Photo Message
Unread Urgent Photo Message
Read Photo Message Notification
Unread Photo Message Notification
/
Delivered Photo Message
Sent Photo Message
Failed Photo Message
Multiple Recipient Incomplete Photo Message
Multiple Recipient Failed Photo Message
MESSAGING
37
Page 40
MESSAGING
MESSAGING
38
3. Inbox
The phone alerts you in 2 ways when you receive a
new message by:
●
Displaying a message notification on the screen.
●
Displaying the message icon . (It blinks
when the message is urgent.)
Received text messages, page messages, photo
messages and e-mail lists may be searched and the
contents viewed. Received messages are displayed
from newest to oldest.
Out of Memory Warning
If the memory is full, no more messages can be
received until enough memory space becomes
available. When there is no space to save text
messages, Text msg 100% full. Please erase old
messages. is displayed. For photo messages, Photo
msg 100% full. Erase photo from Inbox now to
receive new photo. For photo notifications, NOTI msg
100% full Erase notification from Inbox now to
receive new noti. is displayed. When your Auto Delete
is on, the messages are received even when the
memory is full.
Viewing Your Inbox
Up to 50 received messages can be stored in the Inbox.
1. Press Left Soft Key , , .
2. Use to highlight an Inbox message.
●
Left Soft Key
kinds of messages.
●
Right Soft Key
3. Use to highlight an Inbox message, then
press .
4. While viewing the selected message, press Left
Soft Key
Options
.
Reply
Options
Reply
or Right Soft Key
complying with the
.
Options from here:
Delete
Forward
Save contact
Deletes the selected message.
Forwards a received message
to other destination
address(es).
Stores the callback number,
e-mail address, and numbers
in user data included in the
Page 41
received message into your
Contacts.
Lock
Information
Locks or unlocks the selected
message.
Shows the message type
priority and status.
Options for MMS
Play Again/ Save Picture/ Save Sound/ Message Info
4. Sent
Up to 50 sent messages or MMS messages can be
stored in the Outbox. View lists and contents of sent
messages and verify whether the transmission was
successful or not.
1. Press Left Soft Key , , .
2. Use to highlight an Outbox message.
●
Press Left Soft Key
●
Press Right Soft Key
3. Use to highlight an Outbox message, then
press . While viewing the selected Outbox
message, press Left Soft Key
Resend
Options
.
.
Resend
to or
press Right Soft Key
Delete
Forward
Save contact
Lock
Information
Options
.
Deletes the selected message.
Forwards a received message
to other destination
address(es).
Stores the callback number, email address, and numbers in
user data included in the
received message into your
Contacts.
Locks or unlocks the selected
message.
Shows the message type
priority and status.
MESSAGING
39
Page 42
MESSAGING
MESSAGING
40
5. Drafts
Displays saved messages and draft messages.
1. Press Left Soft Key , , .
2. Use to highlight a Saved message.
●
Press
●
Press Right Soft Key
Delete
Lock/Unlock
Delete multipleSelective/ All
Edit
.
Options
Deletes the selected message
from the Drafts.
Locks a message so that it is
not erased if the Erase Saved
or Erase All feature is used.
.
6. Voice Mail
Allows you to view new voice messages recorded in
the voice mail box. Your phone will alert you when
you receive a new voice message.
Checking Your Voice Mail Box
1. Press Left Soft Key , , .
2. Options from here:
●
Press Left Soft Key Clear to delete
information, then select Clear Count.
●
Press to listen to the message(s).
Page 43
7. Settings
Allows you to configure 9 settings for received messages.
1. Press Left Soft Key , , .
2. Use to highlight one of the settings and
press to select it.
Message Settings Sub-Menu Descriptions
7.1 Auto Save
Allows you to automatically save sent messages in
your Outbox. You can choose Auto Save, Prompt, or
Do Not Save. (
7.2 Auto Delete
With this feature on, read messages(except locked
messages) are automatically deleted when you
exceed the storage limit. (
7.3 Text-Auto View
Allows you to directly display the content when
receiving a message. (
Auto Save/ Prompt/ Do not save
On/ Off
)
On/ Off
)
)
7.4 Photo-Auto Receive
Allows you to set photos to be received automatically.
On/ Off
)
(
7.5 Text-Callback #
Allows you to automatically send a designated
callback number when you send a message. Allows
you to manually enter the number. (
On/ Off/ Edit
)
7.6 Voice Mail #
Allows you to manually enter the number for Voice
Mail Service. This number should be only used when
a VMS access number is not provided from the
network. (
Enter number
)
7.7 Entry Mode
Allows you to select the default input method.
T9Word/ Abc/ 12 3
(
)
7.8 Quick Text
Allows you to display, edit, and add text phrases.
These text strings allow you to reduce manual text
input into messages. You can use predefined phrases.
MESSAGING
41
Page 44
MESSAGING
MESSAGING
42
7.9 Text-Auto Play
With this feature on, the display automatically scrolls
On/ Off
down while viewing messages. (
)
7.0 Text-Signature
Allows you designate a signature to automatically
send with your messages. You can create a custom
signature line or use your Contact Info.
None/ Custom
(
)
7.*2-Min Reminder
Allows you to set your phone to remind alert every 2
On/ Off
minute. (
)
8. Delete All
Allows you to erase all the messages stored in your
Inbox, Sent, or Saved messages folders. You can also
erase all messages at the same time.
1. Press Left Soft Key , , .
●
Press
in the Inbox.
●
Press
in the Outbox.
●
Press
in the Saved messages folder.
●
Press
the Inbox, Outbox, and Saved messages folder.
Inbox
to erase all messages stored
Sent
to erase all messages stored
Drafts
to erase all messages stored
All
to erase all messages stored in
Page 45
BREW
Brew
Brew Apps allows you to do more than just talk on
your phone. Brew Apps is service that allows you to
download and use applications on your phone. With
Brew Apps, it is quick and easy to personalize your
phone to your lifestyle and tastes. Just download the
applications that appeal to you. With a wide range of
software available, from ringtones to games to
productivity tools, you can be assured that you can
find something useful, practical, or down right
entertaining.
There are new applications constantly being created
for your use.
Downloading Applications
You can download applications and use Brew Apps
wherever service is available, see map for details.
Incoming Calls
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available.
If you do not have voice mail, downloading will not be
interrupted by an incoming call, and the caller will
receive a busy signal.
When using applications, an incoming call will
automatically pause the application and allow you to
answer the call. When you complete your call, you
can resume using the application.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Brew
Menu
.
.
1. Brew Apps: To add, delete, or
disable Brew Apps
applications.
2. Get Information: To view
information about Brew Apps
applications.
BREW
43
Page 46
BREW
BREW
44
1. Brew Apps
Allows you to download selected applications while
displaying the entire application list retrieved from
the Brew Apps server connection.
1. Press Left Soft Key , , .
2. Press .
3. Select [Brew Apps] Icon and press .
Short Cut
Pressing the right arrow key will start Brew
Apps.
2. Get Information
Gives you information about the Brew Apps selection
key.
1. Press Left Soft Key , , .
2. Press .
Ye s
3. Press Left Soft Key
.
Managing Your Brew Apps Applications
Add new applications and remove old ones at any
time.
Removing Brew Apps Applications
By deleting an application you will restore memory
capacity to the phone. To restore an application once
it has been removed will require that you pay and
download it again.
1. Access
2. Use to select Settings, then press .
3. Use to highlight Manage Apps, then press
4. Use to highlight the application to be
5. Use to select Remove, then press .
Brew Apps
.
deleted, then press .
.
Page 47
WEB
Web
The Mobile Web feature allows you to view internet
content. Access and selections within this feature are
dependent upon your service provider. For specific
information on Mobile Web access through your
phone, contact your service provider.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Web
Menu
.
.
1. Start Browser
2. Web Messages
3. Web Settings
1. Start Browser
Allows you to initiate a MiniBrowser session.
1. Press Left Soft Key , , .
2. After a few seconds, you see the Home Page.
Ending a MiniBrowser Session
End a MiniBrowser session by pressing .
Navigating Through the Browser
On-screen items may be presented in one of the
following ways:
●
Numbered options
You can use your numeric keypad or you can
select the items by moving the cursor and pressing
the appropriate Soft Key(s).
●
Links embedded in content
You can act on the options or the links by using
the Soft Keys just below the display screen.
●
Text or numbers
You can select the items by moving the cursor and
pressing the appropriate Soft Keys.
WEB
45
Page 48
WEB
46
Scrolling
Use to scroll through the content if the current
page does not fit on one screen. The currently
selected item is indicated by a cursor on the screen.
Fast Scrolling
Press and hold to quickly move the cursor up
and down on the current screen.
Scrolling by Page
Press the Side Keys to move up and down a page at a
time.
Home Page
WEB
Press and hold or to access the Home Page.
View Browser Menu
Press and hold to use the Browser menu.
Soft Keys
To navigate to different screens or select special
functions, use the Soft Keys. The function associated
with the Soft Keys can change for each page and
depends on each highlighted item.
Left Soft Key
Left Soft Key is used primarily for first options or
selecting an item but its function may change,
depending on the content displayed.
Right Soft Key
Right Soft Key is used primarily for secondary
options or a menu of secondary options.
Entering Text, Numbers, or Symbols
When prompted to enter text, the current text entry
method appears above the Right Soft Key as
Alpha, Symbol, Number, Wo rd , or Smart. To change
the input mode, press the Right Soft Key . To
change to upper case, press . The text method
appears above the Right Soft Key as ALPHA,
WORD, or SMART.
Page 49
Clearing Out Text/Number Entered
When entering text or numbers, press to clear
the last number, letter, or symbol. Press and hold
to clear the input field completely.
Initiating a Phone Call From Mobile Web
You can make a phone call from Mobile Web if the
site you are using supports the feature (the phone
number may be highlighted and Left Soft Key
appears as Call). The browser connection is
terminated when you initiate the call. After you end
the call, your phone returns to the screen from which
you initiated the call.
2. Web Messages
Allows you to view Web messages. If there are any
browser messages, the list is displayed from newest
to oldest.
1. Press Left Soft Key , , .
Your list of Web messages is displayed.
3. Web Settings
Allows you to select a browser alert sound.
1. Press Left Soft Key , , .
2. Select an alert option.
Prompt
Web Alerts
At start/ None
Mute/ 2 Beeps/ 4 Beeps
WEB
47
Page 50
MULTIMEDIA
MULTIMEDIA
48
Multimedia
View, take and trade your digital pictures and video
right from your wireless phone.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Multimedia
Menu
.
.
1. Take Photo
2. Take Video
3. Record Voice
4. Photo Gallery
5. Video Gallery
6. Voice Clip
1. Take Photo
1. Press Left Soft Key , , .
Note
Pressing the side Camera key from standby mode
is a hot key to Take Photo.
2. Set the brightness , zoom , flash , and
Options
press Right Soft Key
settings.
●
Select the option(s) to customize.
Resolution
Quality
Zoom
Brightness
Flash
Multishot
Self Timer
White Balance
When the Flash is On, take the photo within 12
inches of the subject.
3. Take a picture by pressing .
4. Press Left Soft Key
The picture is stored in
Using the Side Camera Key
You can use the Side Camera Key to use the sub
menu list.
1. Press the Side Camera Key for about 3
seconds to enter the Take Photo mode.
2. Take a picture by pressing Side Camera Key .
Save
.
Photo Gallery
.
2. Take Video
1. Press Left Soft Key , , .
2. Set the brightness , zoom , and press
Right Soft Key
settings.
●
Select the option(s) to customize.
Resolution
Zoom
Brightness
Flash
White Balance
3. Press to begin recording, and again to stop.
4. Press Left Soft Key
is stored in
Options
High(176X144)/
Low(128X96)
Always On/ On/ Off
Auto/ Sunny/ Cloudy/
Tungsten/ Fluorescent
Save
Video Gallery
to change other
. The recorded video
.
MULTIMEDIA
49
Page 52
MULTIMEDIA
MULTIMEDIA
50
3. Record Voice
Allows you to add, listen to, and erase short verbal
reminders.
1. Press Left Soft Key , , .
2. Press
3. Talk into the microphone, then press
The default memo title is the date and time of
recording.
4. While the highlight is still on the recording, press
Right Soft Key
following:
●
REC
to record a new voice memo.
Options
Set as
●
Stop
to access the
Cancel
4. Photo Gallery
Allows you to view pictures stored in the phone.
1. Press Left Soft Key , , .
2. Select your desired picture with and press
Options
Right Soft Key
Send/ Set As/ Delete/ Rename/ List view
.
/
Delete all/ Information
5. Video Gallery
Allows you to view videos stored in the phone.
1. Press Left Soft Key , , .
2. Select your desired video with and press
.
Right Soft Key
Send/ Set as wallpaper/ Delete/ Rename/ List
/
Delete all/ Information
view
Options
6. Voice Clip
1. Press Left Soft Key , , .
2. Check out the stored voice clip files.
3. Select your desired voice clip with and press
Right Soft Key
Send
/ Set As/ Delete/ Rename/ Delete all/
Information
Options
.
.
Page 53
CONTACTS
Contacts
The Contacts Menu allows you to store names,
phone numbers and other information in your
phone’s memory. When you access your Contacts,
the number in parentheses represents the number of
entries you have stored (up to 500).
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Contacts
[Menu]
.
.
1. Contacts
2. New Contact
3. Groups
4. Speed Dials
5. My Contact Info
1. Contacts
Allows you to view your Contacts list.
1. Press Left Soft Key , , .
2. Options from here:
●
Press to scroll through your Contacts
alphabetically.
●
Press Right Soft Key
of the following:
Send message/ Delete/ Edit/ Call/ Send via
Bluetooth
●
Press Left Soft Key
contact information.
/
Delete all/ Cancel
Options
New
to store new
to select one
CONTACTS
51
Page 54
CONTACTS
52
2. New Contact
Allows you to add a new contact to your Contacts.
Note
Using this sub-menu, the number is saved as a
new Contact. To save the number into an existing
Contact, edit the Contact entry.
1. Press Left Soft Key , , .
2. Enter the name, then press .
3. Select the Label you want and press .
4. Enter the number, then press .
CONTACTS
5. Continue saving the entry as necessary.
3. Groups
Allows you to view your grouped Contacts, add a new
group, change the name of a group, or delete a
whole group.
1. Press Left Soft Key , , .
2. Options from here:
●
Use to highlight a group to view, then
press .
●
Press Left Soft Key
group to the list.
●
Use to highlight a group, then press Right
Soft Key
the group or delete the group.
Options
Delete/ Send message/ Rename group
Set group ringtone/ Delete all
New
to add a new
to change the name of
/
Page 55
4. Speed Dials
Allows you to view your Speed Dials list, designate
new Speed Dials, or remove Speed Dial designations
entered in your Contacts.
1. Press Left Soft Key , , .
2. Use to highlight the Speed Dial position (or
enter the Speed Dial digit), then press .
3. Use to highlight the Contact, then press .
4. Use to highlight the number, then press .
A confirmation message is displayed.
5. My Contact Info
Allows you to view your contact information.
1. Press Left Soft Key , , .
2. Use to select the feature you want to edit,
then press .
3. Edit the information as necessary.
Note
You cannot edit phone number, but you can add
an additional phone number.
CONTACTS
53
Page 56
CALL HISTORY
54
Call History
The Call History Menu is a list of the last phone
numbers or Contact entries for calls you placed,
accepted, or missed. It is continually updated as new
numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of
the list.
Note
To view a quick list of all your recent calls, press
from standby mode.
Access and Options
1. Press Left Soft Key
CALL HISTORY
2. Press
3. Select a sub-menu.
Call History
Menu
.
.
1. Missed Calls
2. Dialed Calls
3. Received Calls
4. All Calls
5. Call Timer
6. Data Count
1. Missed Calls
Allows you to view the list of missed calls; up to 30
entries.
1. Press Left Soft Key , , .
2. Use to highlight an entry.
Page 57
2. Dialed Calls
Allows you to view the list of outgoing calls; up to 30
entries.
1. Press Left Soft Key , , .
2. Use to highlight an entry.
●
Press to view the entry.
●
Press to place a call to the number.
●
Press Right Soft Key
Save contact/ Delete/ Call/ Delete all
to select
●
Press to return to the standby mode.
Options
(for call lists)
3. Received Calls
Allows you to view the list of incoming calls; up to 30
entries.
1. Press Left Soft Key , , .
2. Use to highlight an entry.
4. All Calls
Allows you to erase selected call list(s).
1. Press Left Soft Key , , .
2. The history of all calls are displayed.
5. Call Timer
Allows you to view the duration of selected calls.
1. Press Left Soft Key , , .
2. Use to highlight a call list, then press .
Last Call/ Home Calls/ Roam Calls/ All Calls
6. Data Count
Allows you to view the list of received and
transmitted data calls.
1. Press Left Soft Key , , .
2. Use to highlight a data call list, then press .
Transmitted/ Received/ To t a l
CALL HISTORY
55
Page 58
MY MEDIA
MY MEDIA
56
My Media
This menu allows you to use a wide variety of images,
sounds, and more.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
My media
Menu
.
.
1. Images
2. Videos
3. Sounds
4. Message Objects
1. Images
Allows you to choose images to your phone to
display as the background image displayed on the
phone.
1. Press Left Soft Key , , .
2. Use to highlight your selection, then press
Set As
Right Soft Key
to select.
2. Videos
Allows you to choose video clips.
1. Press Left Soft Key , , .
3. Sounds
Allows you to choose the downloaded ringtones
heard for incoming calls.
1. Press Left Soft Key , , .
2. Use to highlight your selection, then press
Right Soft Key
Set As
to select.
Page 59
4. Message Objects
Allows you to set objects to correspond to your
messages.
1. Press Left Soft Key , , .
2. Select one of the following (highlight and press
or press corresponding key):
●
Small Pictures
●
Large Pictures
●
My Pictures
●
Sounds
●
My Melodies
●
Animations
●
My Animations
3. Use to highlight your selection, then press
.
MY MEDIA
57
Page 60
TOOLS
TOOLS
58
Tools
Your phone tools include a Voice Command, My
Menu, Alarm Clock, Calendar, Tip Calculator,
Notepad, Calculator, World Clock, and Stopwatch.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
TToo oollss
Menu
.
.
1. Voice Command
2. My Menu
3. Alarm Clock
4. Calendar
5. Tip Calculator
6. Notepad
7. Calculator
8. World Clock
9. Stopwatch
1. Voice Command
Allows you to make phone calls quickly and easily by
voice. Your phone recalls the number from your
Contacts, displays it briefly, and then dials it. This menu
also includes feature for those who are in driving or
blind. It delivers time information by voice and allows to
check out the missed calls, messages and voicemails.
1. Press Left Soft Key, , .
2. When prompted, say “Call Someone”.
3. When prompted, say the name of the Contact you
want to call. The phone will ask you to confirm the
name before dialing.
4. Also, you can dial any number not to speak of the
listed contact. Press the 4,7,10,11 digit numbers
continuously.
Call Someone/ Digit Dial/ Voice Mail/ Missed
Calls/ Messages/ Time & Date
Page 61
2. My Menu
Lets you access to favorite menu quickly by customizing
my menu. Max 12 items can be stored in My Menu.
1. Press Left Soft Key, , .
2. Select the menu of your choice by using ,
then press .
3. Select the Menu to add to My Menu with ,
then press .
3. Alarm Clock
Allows you to set one of five alarms. The current time
is displayed at the top of the screen when you select
an alarm to set. At the alarm time, Alarm 1 (or 2 or
3, as applicable) will be displayed on the LCD screen
and the alarm will sound.
1. Press Left Soft Key, , .
[New]
2. Press Left Soft Key
3. In Quick Alarm option, you can select Off/
Manual/ 10 min later/ 20 min later/ 30 min later
/ 1 hour later/ 3 hours later.
.
For example, you can take a nap in the afternoon
with the quick alarm set to 30 min later. It will
allow you to wake up on time.
4. Use to highlight the alarm time then press .
5. Set the time for alarm and press .
6. Use to highlight Once (recurring setting) and
press .
7. Press to select one of the following and press
.
Once/ Daily/ Mon ~ Fri/ Sat ~ Sun
8. Use to highlight Alarm Tone (ring type
setting) and press .
9. Use to select one of the available alarm ring
types and press .
10. Press
Save
.
TOOLS
59
Page 62
TOOLS
TOOLS
60
4. Calendar
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your
appointment.
1. Press Left Soft Key, , .
2. Use to highlight the scheduled day.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
New
●
Time
●
Reminder
●
Ringtones
.
3. Press Left Soft Key
4. Enter your schedule information including:
●
Date
●
Subject
●
Repeat
●
Expiration
5. Press
Save
.
5. Tip Calculator
Allows you to quickly and easily estimate the initial
amounts for a bill with the calculated amount of the
bill, the amount and percentage of the tip, and the
number of people as variables.
1. Press Left Soft Key, , .
6. Notepad
Allows you to add, read, edit, and erase notes to
yourself.
1. Press Left Soft Key, , .
2. Press Left Soft Key New to write a new note.
3. Type the note, then press .
A confirmation message displays briefly, then
displays your list of notes.
Viewing a Notepad Entry
1. Access Notepad and highlight the entry.
Options
2. To erase, press Right Soft Key
.
Page 63
●
Delete
●
Edit
●
Delete all
To edit highlight the entry, then press
and press Left Soft Key
Soft Key
Options
and
Edit
. Or press Right
[View]
Edit.
7. Calculator
Allows you to perform simple mathematical
calculations. You can enter numbers up to the fifth
decimal place.
1. Press Left Soft Key, , .
2. Enter data.
●
Use keypad to enter numbers.
●
Use to enter decimals.
●
Press Left Soft Key to clear the entry.
●
Press Right Soft Key to enter function.
●
Use Navigation Key to enter operators.
●
Press to complete equation.
8. World Clock
Allows you to determine the current time in another
time zone or country.
1. Press Left Soft Key, , .
Cities
2. Press Right Soft Key
to move the time
bar across the world map and display the
date/time in that location.
3. Press Left Soft Key
[Set DST]
.
9. Stopwatch
Stopwatch is available just as common stopwatches
we see and use in daily life.
1. Press Left Soft Key, , .
2. Press press Start to start, and press Stop
to stop.
●
You can use the Lap function using Left Soft
Key Lap. Max. 20 lap time is available. And lap
time can be recorded.
3. Press Left Soft Key Reset to reset.
TOOLS
61
Page 64
SETTINGS
SETTINGS
62
Settings
The Settings menu has options to customize your
phone.
Access and Options
1. Press Left Soft Key
2. Press
3. Select a sub-menu.
Settings
Menu
.
.
1. Sound
2. Display
3. System
4. Security
5. Call Setup
6. Data Settings
7. Bluetooth
8. Location
1. Sound
Options to customize the phone’s sounds.
1.1 Ringers
Allows you to assign ring tones for incoming calls.
1. Press Left Soft Key, , , .
Caller ID/No Caller ID/Restricted Calls
2. Select
3. Use to select a ringer, then press .
1.2 Key Tone
Allows you to select the Key Tone type.
1. Press Left Soft Key, , , .
[Play]
2. Select a tone style, then press
Xylophone/Drum Kit/Keyboard/Business/Beep
None
.
.
/
Page 65
1.3 Flip Tone
Allows you to select the Flip Tone type.
1. Press Left Soft Key, , , .
2. Select a tone style, then press .
Flip tone 1/ Flip tone 2/ Flip tone 3/ Flip tone 4/
None
1.4 Volume
Allows you to set various volume settings.
1. Press Left Soft Key, , , .
Master Volume/ Key Tone Volume
2. Select
Flip Tone Volume/ Earpiece Volume
Speaker Volume
3. Use to adjust the volume of the ringer, then
press
.
[Set]
to save the setting.
/
/
1.5 Message Alerts Tones
Allows you to select the alert tones type for a new
message.
1. Press Left Soft Key, , , .
Message tone1/ Message tone2
2. Select
Message tone3/ Message tone4
3. Use to select a setting, then press .
/
/ Vibrate/ None
1.6 Service Alerts
Allows you to set any of the 5 Alert options to On or Off.
1. Press Left Soft Key, , , .
2. Select an alert option.
1.6.1 Service Change
Alerts you when service changes.
1.6.2 Minute Beep
Alerts you 10 seconds before the end of every
minute during a call.
SETTINGS
63
Page 66
SETTINGS
SETTINGS
64
1.6.3 Call Connect
Alerts you when the call is connected.
1.6.4 Back To Top
Alerts you when you scroll through the end of a
menu list.
On/ Off
3. Use to set
, then press .
1.7 Power On/Off Tones
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. Press Left Soft Key , , , .
2. Use to set to
On/ Off
, then press .
2. Display
Options to customize the phone’s display screen.
2.1 Screens
Allows you to choose the kind of background to be
displayed on the phone.
1. Press Left Soft Key , , , .
Wallpapers/ Power On/ Power Off,
2. Select
press .
3. Select from different screens, then press .
4. Press .
Select
5. Left Soft Key
.
Note
Right Soft Key
additional choices.
More
, provides access to
then
Page 67
2.2 Banner
Allows you to enter a string of up to 12 characters
which display on the LCD screen.
1. Press Left Soft Key , , , .
2. Set the Main banner On/ Off.
3. Enter your banner text, then press .
2.3 Backlight
Allows you to set the duration for illuminating the
backlight.
1. Press Left Soft Key , , , .
2. Choose a sub-menu, then press .
Timer/ Brightness
2.4 Menu Style
Allows you to view the Menu as an Icon or List
display.
1. Press Left Soft Key , , , .
Icon
or
List
2. Select
and press .
2.5 Languages
Allows you to set the bilingual feature according to
your preference. Choose between English and Spanish.
1. Press Left Soft Key , , , .
2. Use to select
.
English
or
Spanish
, then press
2.6 Clocks & Calendar
Allows you to select the type of clocks displayed on
the main LCD or sub LCD.
1. Press Left Soft Key , , , .
2. Choose a Contrast sub-menu and press .
Main LCD/ Front LCD
3. Use to adjust the contrast level, then press
.
Options for Main LCD
Normal clock/ Digital clock/ Analog clock/
Dual clock/ Calender
Options for Front LCD
Digital/ Minimize
SETTINGS
65
Page 68
SETTINGS
SETTINGS
66
2.7 Calling Fonts
Allows you to set the size and color of the font only
for calling digits and text editor.
1. Press Left Soft Key , , , .
Size
or
Color
2. Select
3. Press to choose a setting, then press to
save.
Control the size Normal/ Large
Select the color of calling fonts.
Black/ Blue/ Red/ Green/ Pink
sub-menu.
2.8 Color Schemes
Allows you to choose the color of the background
screen.
1. Press Left Soft Key , , , .
Default/ Tropical/ Business
2. Select
.
, then press
3. System
The System menu allows you to designate specific
system network settings.
3.1 System Select
Allows you to set up the phone producer’s
management environment. Leave this setting as the
default unless you want to alter system selection as
instructed by your service provider.
1. Press Left Soft Key , , , .
2. Use to select
Automatic B
Home only, Automatic A
, then press .
3.2 Set NAM
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press Left Soft Key , , , .
2. Use to select
.
NAM1
or
NAM2
,
, then press
Page 69
3.3 Auto NAM
Allows the phone to automatically switch between
programmed telephone numbers corresponding to
the service provider area.
1. Press Left Soft Key , , , .
On
or
Off
2. Use to select
, then press .
3.4 Serving System
Identifies the channel number of a system that is
served as a SID Number. This information should only
be used for technical support.
1. Press Left Soft Key , , , .
3.4 Force Call
Allows you to set Analog mode(AMPS) by force.
When it is set to Analog mode, you can only use
Analog(AMPS) call.
1. Press Left Soft Key , , , .
2. Use to select the setting, then press .
Analog/ Cancel
4. Security
The Security menu allows you to secure the phone
electronically.
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls.
You can modify the lock code using the New Lock
code within the Security menu.
1. Press Left Soft Key , , .
2. Enter the four-digit lock code.
The default lock code is commonly the last 4 digits of
your phone number.
3. Press
4. Use to select an option, then press .
Unlock
Lock Phone
.
The phone is never locked
(Lock mode can be used).
SETTINGS
67
Page 70
SETTINGS
SETTINGS
68
Lock
On Power Up
The phone is always locked.
When locked, you can receive
incoming calls and make only
emergency calls.
The phone is locked when it is
turned on.
4.2 Restrict Calls
Allows you to restrict incoming and outgoing calls.
Note
You can receive the incoming calls from saved
contacts on your phone, when Incoming Only is
on.
1. Press Left Soft Key, , .
2. Enter the four-digit lock code.
3. Press
4. Use to select
Restrict Calls
.
On/Off
, then press .
4.3 Emergency #s
Allows you to enter 3 emergency numbers. You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
1. Press Left Soft Key , , .
2. Enter the four-digit lock code.
3. Press
4. Press Left Soft Key to edit the emergency
numbers.
Emergency #s
.
4.4 Change Lock Code
Allows you to enter a new four-digit lock code.
1. Press Left Soft Key , , .
2. Enter the four-digit lock code.
3. Press
4. Enter a new 4-digit lock code.
5. For confirmation, it will ask you to enter the new
lock code again.
Change Lock Code
.
Page 71
4.5 Reset Default
Allows you to reset your phone to the factory default
settings.
1. Press Left Soft Key , , .
2. Enter the four-digit lock code.
3. Press
4. Select Memory/
5. For Memory, choose Handset Contents or
Handset Personal Info. For Default, press
after reading the instructions.
Reset Default
Default
.
.
5. Call Setup
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
5.1 Auto Retry
Allows you to set the length of time the phone waits
before automatically redialing a number when the
attempted call fails.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
Off/ Every 10 sec/ Every 30 sec/ Every 60 sec
5.2 Answer Call
Allows you to determine how to handle an answered
call.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
Flip open/ Any key/ SEND only
SETTINGS
69
Page 72
SETTINGS
SETTINGS
70
5.3 Auto Answer
Allows you to select the number of rings before the
phone automatically answers a call. This feature is
intended for use with hands free devices, but is an
independent feature of the phone and must be
manually turned on/off when connected or
disconnected from the device.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On/ Off
5.4 One-Touch Dial
Allows you to initiate a speed dial call by pressing
and holding the speed dial digit. If set to Disable,
Speed Dial numbers designated in your Contacts will
not function.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On/ Off
5.5 Voice Privacy
Allows you to set the voice privacy feature for CDMA
calls as Enhanced or Standard. CDMA offers inherent
voice privacy. Check with your service provider for
availability.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
Enhanced/ Standard
5.6 Auto Volume
Provides a better audio experience by enabling the
Auto Volume feature to control the dynamic range
and volume of the sending and receiving voice across
different levels of speaker and environments.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On/ Off
Page 73
5.7 Application Mode
Allows you to use the general application and
restricts the output of RF communication.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On/ Off
5.8 TTY Mode
Allows you to attach a TTY (Teletypewriter) device
enabling you to communicate with parties also using
a TTY device. A phone with TTY support is able to
translate typed characters to voice. Voice can also be
translated into characters and then displayed on the
TTY.
1. Press Left Soft Key , , , .
2. Press .
6. Data Settings
This menu allows you to use wireless data
communication services. Wireless data
communication services refers to the utilization of
subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a
maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other
variables. Check that communications information
specifications match the network.
6.1 PC Connection
Allows you to select the data port.
1. Press Left Soft Key , , , .
2. Useto select a setting, then press .
USB/ RS-232C(COM Port)/ Bluetooth/ Closed
SETTINGS
71
Page 74
SETTINGS
SETTINGS
72
6.2 Mode (1X/QNC)
This is setting enables you to set the speed for WAP,
BREW and Tethered Mode.
1. Press Left Soft Key , , , .
2. Useto select a setting, then press .
Auto/ 1X/ QNC
6.3 PPP ID
It is the user’s ID for PPP Authentication Protocol.
1. Press Left Soft Key , , , .
6.4 PPP Password
It is the user’s password for PPP Authentication
Protocol.
1. Press Left Soft Key , , , .
7. Bluetooth
The LG355 is compatible with devices that support
the Bluetooth
You may create and store 20 pairings within the
LG355 and connect to one device at a time. The
approximate communication range for Bluetooth
wireless technology is up to 30 feet (10 meters).
Note
Read user guide of each
that you are trying to pair with your phone
because the instructions may be different.
Note
The
compatible with all devices which are
your service provider or handset manufacturer cannot be
responsible for compatibility with devices not sold by the
service provider or handset manufacturer.
®
headset and hands-free profile(s)*.
Bluetooth
features of this handset may not be
Bluetooth
Bluetooth
accessory
enabled;
Page 75
7.1 Paired Devices
Pairing is the process that allows the handset to
locate, establish and register 1-to-1 connection with
the target device.
For pairing new Bluetooth®device
1. Press Left Soft Key , , , .
®
2. Follow the Bluetooth
set the device to pairing mode.
3. Press Right Soft Key for New. Select SearchNewand press .
4. If Bluetooth
®
turn power on. Select Yesand press .
5. The device will appear in the Found Devices menu
once it has been located. Highlight the device and
press .
6. The handset will prompt you for the passkey.
Consult the Bluetooth
the appropriate passkey (typically “0000” - 4
zeroes). Enter the passkey and press .
accessory instructions to
is set to off, you will be prompted to
®
accessory instructions for
7. Once pairing is successful, select Ye sand
press to connect with the device.
8. Once connected, you will see the device listed in
the Paired Devices menu and the Bluetooth
®
connected icon will show up on your idle
screen.
7.2 Power
Allows you to set the power On/Off.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
On/ Off
Note
By default, your device’s Bluetooth functionality
is turned off.
SETTINGS
73
Page 76
SETTINGS
SETTINGS
74
7.3 My Visibility
Allows you to set Yes/No.
1. Press Left Soft Key , , , .
2. Use to select a setting, then press .
®
When the Bluetooth
the options are
Hidden/ Visible
functionality is set to
.
Ye s
Note
If you turn on My Visibility, your device is able to
be searched by other in-range Bluetooth
®
devices.
7.4 My Bluetooth Name
Allows you to edit the name of the
1. Press Left Soft Key , , , .
2. Press to clear the existing name.
3. Use the numeric keypad to enter a new custom
name.
4. Press to save and exit.
Bluetooth
device.
7.5 My Bluetooth Info
Allows you to view the information of the Bluetooth
device.
1. Press Left Soft Key , , , .
,
8. Location
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
1. Press Left Soft Key , , .
2. Use to select a setting, then press .
Location on/ E911 only
Note
GPS satellite signals are not always transmitted,
especially under bad atmospheric and
environmental conditions, indoors etc.
®
Page 77
9. Phone Info.
The Phone Info. menu provides you with specific
information pertaining to your phone model.
1. My Number
Allows you to view your phone number.
1. Press Left Soft Key, , , .
2. SW Version
Allows you to view the SW, PRL, Brew and
Bluetooth
BT(
1. Press Left Soft Key , , , .
).
4. Memory Status
Allows you to view condensed information about
using the phone.
1. Press Left Soft Key , , , .
Common Memory/ Reserved Memory
3. Icon Glossary
Allows you to view all the icons and their meanings.
1. Press Left Soft Key , , , .
SETTINGS
75
Page 78
SAFETY
SAFETY
SAFETY
76
TIA Safety Information
The following is the complete TIA Safety Information
for wireless handheld phones.
Exposure to Radio Frequency Signal
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When ON, it receives
and sends out Radio Frequency (RF) signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones.
Those guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
* American National Standards Institute; National
Council on Radiation Protection and Measurements;
International Commission on Non-Ionizing Radiation
Protection.
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers,
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
The design of your phone complies with the FCC
guidelines (and those standards).
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up
and over your shoulder.
Page 79
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
●
Give full attention to driving -- driving safely is
your first responsibility;
●
Use hands-free operation, if available;
●
Pull off the road and park before making or
answering a call if driving conditions or the law
require it.
Electronic Devices
Most modern electronic equipment is shielded from
RF signals. However, certain electronic equipment
may not be shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
●
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is
turned ON;
●
Should not carry the phone in a breast pocket;
●
Should use the ear opposite the pacemaker to
minimize the potential for interference;
●
Should turn the phone OFF immediately if there is
any reason to suspect that interference is taking
place.
SAFETY
77
Page 80
SAFETY
SAFETY
78
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your service provider (or call the
customer service line to discuss alternatives).
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Health Care Facilities
Turn your phone OFF in health care facilities when
any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may use
equipment that could be sensitive to external RF
energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Aircraft
FCC regulations prohibit using your phone while in
the air. Switch OFF your phone before boarding an
aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio”. Obey all signs and
instructions.
Page 81
Potentially Explosive Atmosphere
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Areas with a potentially explosive atmosphere are
often, but not always marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders); and any other area where you
would normally be advised to turn off your vehicle
engine.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
Safety Information
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all times after reading it.
Use only LG-approved chargers specific to your
phone model since they are designed to maximize
battery life.
●
Do not disassemble or short-circuit the battery.
●
Keep the battery’s metal contacts clean.
●
Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before replacement.
●
Recharge the battery after long periods of non-use
to maximize battery life.
●
Battery life will vary due to usage patterns and
environmental conditions.
●
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and
talk/standby times.
●
The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
Explosion, Shock, and Fire Hazards
●
Do not put your phone in a place subject to
excessive dust and keep the minimum required
distance between the power cord and heat sources.
●
Unplug the power cord prior to cleaning your
phone, and clean the power plug pin when it’s dirty.
●
When using the power plug, ensure that it’s firmly
connected. If not, it may cause excessive heat or fire.
●
If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug
pin), metallic articles (such as a coin, paperclip or
pen) may short-circuit the phone. Always cover the
receptacle when not in use.
●
Don’t short-circuit the battery. Metallic articles
such as a coin, paperclip or pen in your pocket or
bag may short-circuit the + and – terminals of the
battery (metal strips on the battery) upon moving.
Short-circuit of the terminal may damage the
battery and cause an explosion.
●
Do not disassemble or crush the battery. It may
cause a fire.
General Notice
●
Using a damaged battery or placing a battery in
your mouth may cause serious injury.
●
Do not place items containing magnetic
components such as a credit card, phone card,
bank book, or subway ticket near your phone. The
Page 83
magnetism of the phone may damage the data
stored in the magnetic strip.
●
Talking on your phone for a long period of time
may reduce call quality due to heat generated
during use.
●
When the phone is not used for a long period
time, store it in a safe place with the power cord
unplugged.
●
Using the phone in proximity to receiving
equipment (i.e., TV or radio) may cause
interference to the phone.
●
Do not use the phone if the antenna is damaged.
If a damaged antenna contacts skin, it may cause a
slight burn. Please contact an LG Authorized
Service Center to replace the damaged antenna.
●
Do not immerse your phone in water. If this
happens, turn it off immediately and remove the
battery. If the phone does not work, take it to an
LG Authorized Service Center.
●
Do not paint your phone.
●
The data saved in your phone might be deleted
due to careless use, repair of the phone, or
upgrade of the software. Please backup your
important phone numbers. (Ring tones, text
messages, voice messages, pictures, and videos
could also be deleted.) The manufacturer is not
liable for damage due to the loss of data.
●
When you use the phone in public places, set the
ringtone to vibration so you don't disturb others.
●
Do not turn your phone on or off when putting it
to your ear.
●
Use accessories, such as earphones and headsets,
with caution. Ensure that cables are tucked away
safely and do not touch the antenna unnecessarily.
If you are listening to music whilst out and about,
please ensure that the volume is at a reasonable level
so that you are aware of your surroundings. This is
particularly imperative when attempting to cross the
street.
Avoid damage to your hearing
Damage to your hearing can occur if you are exposed
to loud sound for long periods of time. We therefore
recommend that you do not turn on or off the
handset close to your ear. We also recommend that
music and call volumes are set to a reasonable level.
SAFETY
81
Page 84
SAFETY
SAFETY
82
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update
on Mobile Phones:
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit
very low levels of RF when in standby mode. Whereas
high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is the FDA's role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless phones
are shown to emit Radio Frequency (RF) energy at a
level that is hazardous to the user. In such a case, the
FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to
repair, replace, or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
●
Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
●
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
Page 85
●
Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The FDA belongs to an interagency working group of
the federal agencies that have responsibility for
different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies
belong to this working group:
●
National Institute for Occupational Safety and
Health
●
Environmental Protection Agency
●
Occupational Safety and Health Administration
●
National Telecommunications and Information
Administration
The National Institutes of Health participates in
some interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety
questions about wireless phones.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
3. What kinds of phones are the subject of this
update?
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of the
FDA and other federal health and safety agencies.
When the phone is located at greater distances from
the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly
SAFETY
83
Page 86
SAFETY
SAFETY
84
with increasing distance from the source. The socalled “cordless phones,” which have a base unit
connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety
limits.
4. What are the results of the research done
already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of Radio Frequency (RF)
energy exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we do not know with certainty what the results of
such studies mean for human health. Three large
epidemiology studies have been published since
December 2000. Between them, the studies
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
since the average period of phone use in these
studies was around three years.
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
Page 87
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
6. What is the FDA doing to find out more about
the possible health effects of wireless phone RF?
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The project has also
helped develop a series of public information
documents on EMF issues.
The FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research And Development Agreement
(CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and
academic organizations. CTIA-funded research is
conducted through contracts with independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone
users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
SAFETY
85
Page 88
SAFETY
SAFETY
86
7. How can I find out how much Radio Frequency
energy exposure I can get by using my wireless
phone?
All phones sold in the United States must comply with
Federal Communications Commission (FCC)
guidelines that limit Radio Frequency (RF) energy
exposures. The FCC established these guidelines in
consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF
exposure from wireless phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
(
http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone’s RF exposure level in the
online listing.
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the Radio Frequency (RF) energy exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA
scientists and engineers. The standard,
“Recommended Practice for Determining the SpatialPeak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques”, sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissuesimulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
Page 89
9. What steps can I take to reduce my exposure to
Radio Frequency energy from my wireless phone?
If there is a risk from these products — and at this
point we do not know that there is — it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to Radio Frequency (RF)
energy. Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure. If you must conduct extended
conversations by wireless phone every day, you could
place more distance between your body and the
source of the RF, since the exposure level drops off
dramatically with distance. For example, you could
use a headset and carry the wireless phone away
from your body or use a wireless phone connected to
a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
SAFETY
87
Page 90
SAFETY
SAFETY
88
11. What about wireless phone interference with
medical equipment?
Radio Frequency (RF) energy from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure Electro Magnetic Interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid
at the same time. This standard was approved by the
IEEE in 2000.
The FDA continues to monitor the use of wireless
phones for possible interactions with other medical
devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the
interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation/)
Page 91
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention
off the road.
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of
these devices if available to you.
3. Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voicemail answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, and ice can
be hazardous, but so is heavy traffic. As a driver,
your first responsibility is to pay attention to the
road.
5. Don’t take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Do not get caught in a
dangerous situation because you are reading or
writing and not paying attention to the road or
nearby vehicles.
SAFETY
89
Page 92
SAFETY
SAFETY
90
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan your calls before
you begin your trip or attempt to coincide your
calls with times you may be stopped at a stop
sign, red light, or otherwise stationary. But if you
need to dial while driving, follow this simple tip -dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful or
emotional conversations and driving do not mix;
they are distracting and even dangerous when you
are behind the wheel of a car. Make people you
are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in
dangerous situations -- with your phone at your
side, help is only three numbers away. Dial 911 or
other local emergency number in the case of fire,
traffic accident, road hazard, or medical emergency.
Remember, it’s a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in
your community. If you see an auto accident, crime
in progress or other serious emergency where lives
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving
may require attention, but are not urgent enough
to merit a call for emergency services. But you
can still use your wireless phone to lend a hand.
If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
For more information, please call to 888-901-SAFE,
or visit our website www.wow-com.com.
Page 93
Consumer Information on SAR
(Specific Absorption Rate)
This model phone meets the government's
requirements for exposure to radio waves. Your
wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the
emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
power level in all tested frequency bands. Although
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value.
Because the phone is designed to operate at multiple
power levels to use only the power required to reach
the network, in general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
The highest SAR value for this model phone when
tested for use at the ear is 1.24 W/kg and when
worn on the body, as described in this user guide, is
1.12W/kg (body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements). While there may be
differences between SAR levels of various phones and
at various positions, they all meet the government
requirement for safe exposure.
SAFETY
91
Page 94
SAFETY
SAFETY
92
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC
ID BEJLX350. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.ctia.org/
In the United States and Canada, the SAR limit for
*
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
Page 95
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket
01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC
Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed a
rating system for wireless phones, to assist hearing
device users to find phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. Higher ratings mean
that the hearing device is relatively immune to
interference noise. The hearing aid and wireless
phone rating values are then added together. A sum
of 5 is considered acceptable for normal use. A sum
of 6 is considered for best use.
SAFETY
93
Page 96
SAFETY
Standards Institute (ANSI) C63.19 standard.
When you're talking over the cell phone, it's
recommended you'd turn the
HAC.
For information about hearing aids and digital
wireless phones
Bluetooth
mode off for
SAFETY
94
In the above example, if a hearing aid meets the M2
level rating and the wireless phone meets the M3
level rating, the sum of the two values equal M5. This
should provide the hearing aid user with “normal
usage” while using their hearing aid with the
particular wireless phone. “Normal usage” in this
context is defined as a signal quality that is
acceptable for normal operation.
The M mark is intended to be synonymous with the
U mark. The T mark is intended to be synonymous
with the UT mark. The M and T marks are
recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The
U and UT marks are referenced in Section 20.19 of
the FCC Rules. The HAC rating and measurement
procedure are described in the American National
There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.
Optional items are sold separately.
Battery Charger
The battery charger allows you to
charge your phone.
Headset
The headset connects to your phone
allowing hands-free operation.
It includes earpiece, microphone.
Battery
Standard battery is available.
Vehicle Power Charger
The vehicle power charger allows you
to operate the phone and trickle charge
the phone’s battery from your vehicle.
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-free
operation.
Serial Data Cable
The serial data cable, enables you
to connect your phone to your PC.
USB Converter Cable
Connects your phone to
your PC.
Battery Pack Charger
The battery pack charger allows you to
charge the battery pack itself without
the phone.
Holster
Equip a holster with the phone to make
it stable by attaching it to one place.
ACCESSORIES
95
Page 98
LIMITED WARRANTY STATEMENT
LIMITED WARRANTY STATEMENT
96
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be
free from defects in material and workmanship,
according to the following terms and conditions:
(1) The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s
manufacture date code.
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
(3) This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
(4) The external housing and cosmetic parts shall be
free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
(5) Upon request from LG, the consumer must
provide information to reasonably prove the date
of purchase.
(6) The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the
product back to the consumer after the
completion of service under this limited warranty.
Page 99
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the
product in other than its normal and customary
manner.
(2) Defects or damages from abnormal use,
abnormal conditions, improper storage,
exposure to moisture or dampness,
unauthorized modifications, unauthorized
connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper
installation, or other acts which are not the fault
of LG, including damage caused by shipping,
blown fuses, spills of food or liquid.
(3) Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
(4) That the Customer Service Department at LG
was not notified by consumer of the alleged
defect or malfunction of the product during the
applicable limited warranty period.
(5) Products which have had the serial number
removed or made illegible.
(6) This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally
exposed parts that are scratched or damaged
due to normal customer use.
(9) Products operated outside published maximum
ratings.
(10)Products used or obtained in a rental program.
(11) Consumables (such as fuses).
LIMITED WARRANTY STATEMENT
97
Page 100
LIMITED WARRANTY STATEMENT
LIMITED WARRANTY STATEMENT
98
3. STATE LAW RIGHTS:
No other express warranty is applicable to this
product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LGE MOBILECOMM USA INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusive limitation of
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
4. HOW TO GET WARRANTY SERVICE:
To obtain warranty service, please call or fax to the
following telephone numbers from anywhere in the
continental United States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may
also be mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS
location of the LG authorized service center nearest
you and for the procedures for obtaining warranty
claims.
. Please call or write for the
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.