LG 32LV2400 User Manual

OWNER’S MANUAL

LED TV

Please read this manual carefully before operating
your set and retain it for future reference.

LED TV MODELS

32LV2400-UA

42LV4400-UA

47LV4400-UA

55LV4400-UA

P/NO : 194716001150

www.lg.com

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.

The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended

to alert the user to the presence of
uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.

The exclamation point within
an equilateral triangle is
intended to alert the user to

the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.

NOTE TO CABLE/TV
INSTALLER

This reminder is provided to call the CATV
system installer’s attention to Article 820­40 of the National Electric Code (U.S.A.).
The code provides guidelines for proper
grounding and, in particular, specifies that
the cable ground shall be connected to the
grounding system of the building, as close
to the point of the cable entry as practical.

FCC Notice

Class B digital device

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the
equipment and receiver.

- Connect the equipment to an outlet on a
circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/
TV technician for help.

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
(harmful) interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation (of the device).

Any changes or modifications in construction
of this device which are not expressly approved
by the party responsible for compliance
could void the user’s authority to operate the
equipment.

CAUTION

Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.

2

SAFETY INSTRUCTIONS

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this

1

apparatus near water.

Clean only with dry

2

cloth.

Protect the

6

power cord from
being walked
on or pinched
particularly at
plugs, convenience
receptacles, and
the point where
they exit from the
apparatus.

Only use

7

attachments/
accessories
specified by the
manufacturer.

Do not block

3

any ventilation
openings. Install
in accordance with
the manufacturer’s
instructions.

Do not install near

4

any heat sources
such as radiators,
heat registers, stoves,
or other apparatus
(including amplifiers)
that produce heat.

Do not defeat the

5

safety purpose of
the polarized or
grounding-type plug.
A polarized plug has
two blades with one
wider than the other.
A grounding type
plug has two blades
and a third grounding
prong, The wide blade
or the third prong
are provided for your
safety. If the provided
plug does not fit into
your outlet, consult
an electrician for
replacement of the
obsolete outlet.

Use only with the cart,

8

stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the apparatus.
When a cart is used,
use caution when
moving the cart/
apparatus combination
to avoid injury from
tip-over.

Unplug this apparatus

9

during lighting storms
or when unused for
long periods of time.

Refer all servicing to qualified service

10

personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

3

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna

11 14

during a thunder or lighting storm.

Do not allow an impact shock or any

12

objects to fall into the product, and
do not drop onto the screen with
something.

CAUTION concerning the Power Cord:

13

It is recommend that appliances be
placed upon a dedicated circuit; that is,
a single outlet circuit which powers only
that appliance and has no additional
outlets or branch circuits. Check the
specification page of this owner’s
manual to be certain.

Do not connect too many appliances to
the same AC power outlet as this could
result in fire or electric shock.

Do not overload wall outlets. Overloaded
wall outlets, loose or damaged wall
outlets, extension cords, frayed power
cords, or damaged or cracked wire
insulation are dangerous . Any of these
conditions could result in electric shock
or fire. Periodically examine the cord of
your appliance, and if its appearance
indicates damage or deterioration,
unplug it, discontinue use of the
appliance, and have the cord replaced
with an exact replacement part by an
authorized servicer. Protect the power
cord from physical or mechanical abuse,
such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets,
and the point where the cord exits the
appliance.

Do not make the TV with the power cord
plugged in. Do not use a damaged or
loose power cord. Be sure do grasp the
plug when unplugging the power cord.
Do not pull on the power cord to unplug
the TV.

15

16

17

WARNING - To reduce
the risk of fire or electrical
shock, do not expose this
product to rain, moisture
or other liquids. Do not
touch the TV with wet
hands. Do not install this
product near flammable
objects such as gasoline
or candles or expose
the TV to direct air
conditioning.

Do not expose to dripping
or splashing and do not
place objects filled with
liquids, such as vases,
cups, etc. on or over the
apparatus (e.g. on shelves
above the unit).

GROUNDING

Ensure that you connect the earth
ground wire to prevent possible electric
shock (i.e. a TV with a three-prong
grounded AC plug must be connected
to a three-prong grounded AC outlet).
If grounding methods are not possible,
have a qualified electrician install a
separate circuit breaker.

Do not try to ground the unit by
connecting it to telephone wires,
lightening rods, or gas pipes.

Power
Supply

Short-circuit
Breaker

DISCONNECTING DEVICE FROM
MAINS

Mains plug is the disconnecting device.
The plug must remain readily operable.

As long as this unit is connected to the

18

AC wall outlet, it is not disconnected
from the AC power source even if you
turn off this unit by SWITCH.

4

Cleaning

19

When cleaning, unplug the power
cord and rub gently with a soft cloth to
prevent scratching. Do not spray water
or other liquids directly on the TV as
electric shock may occur. Do not clean
with chemicals such as alcohol, thinners
or benzene.

Moving

20

Make sure the product is turned off,
unplugged and all cables have been
removed. It may take 2 or more people
to carry larger TVs. Do not press against
or put stress on the front panel of the
T V.

ANTENNAS

21

Outdoor antenna grounding

If an outdoor antenna is installed, follow
the precautions below. An outdoor
antenna system should not be located
in the vicinity of overhead power lines
or other electric light or power circuits,
or where it can come in contact with
such power lines or circuits as death or
serious injury can occur.

Be sure the antenna system is grounded
so as to provide some protection against
voltage surges and built-up static
charges.

Section 810 of the National Electrical
Code (NEC) in the U.S.A. provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
grounding electrodes and requirements
for the grounding electrode.

Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-21)

Grounding Conductor

(NEC Section 810-21)

Ground Clamps
Power Service Grounding

Electrode System (NEC

Art 250, Part H)

Ventilation

22

Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not
cover the product with cloth or other
materials (e.g.) plastic while plugged
in. Do not install in excessively dusty
places.

Take care not to touch the ventilation

23

openings. When watching the TV for a
long period, the ventilation openings
may become hot.

If you smell smoke or other odors

24

coming from the TV or hear strange
sounds, unplug the power cord contact
an authorized service center.

Do not press strongly

25

upon the panel with
hand or sharp object
such as nail, pencil
or pen, or make a
scratch on it.

Keep the product away from direct

26

sunlight.

Dot Effect

27

The Plasma or LCD panel is a high
technology product with resolution of
two million to six million pixels. In a
very few cases, you could see fine dots
on the screen while you’re viewing the
TV. Those dots are deactivated pixels
and do not affect the performance and
reliability of the TV.

Generated Sound

28

“Cracking” noise: A cracking noise
that occurs when watching or
turning off the TV is generated by
plastic thermal contraction due to
temperature and humidity. This
noise is common for products where
thermal deformation is required.

Electrical circuit humming/
panel buzzing: A low level noise
is generated from a high-speed
switching circuit, which supplies a
large amount of current to operate a
product. It varies depending on the
product.

This generated sound does not
affect the performance and reliability
of the product.

5

ON DISPOSAL

The fluorescent lamp used in this product contains a small amount of mercury. Do not
dispose of this product with general household waste. Disposal of this product must be
carried out in accordance to the regulations of your local authority.

Contents

WARNING / CAUTION ..............2

SAFETY INSTRUCTIONS .........3

Important Safety Instructions .....................3

FEATURE OF THIS TV ...............7

PREPARATION

Accessories ......................................................8

Front Panel Information ................................9

Back Panel Information...............................10

Stand Instructions ........................................ 12

Desktop Pedestal Installation .................... 13

Swivel Stand ................................................... 13

Securing the TV to the Wall to Prevent
Falling When the TV is Used on a

Stand ...............................................................14

Antenna or Cable Connection ..................15

EXTERNAL EQUIPMENT
SETUP

HD Receiver Setup ....................................... 16

DVD Setup......................................................18

VCR Setup.....................................................20

Other A/V Source Setup ............................ 21

USB Connection ...........................................21

Audio Out Connection ............................... 22

WATCHING TV/ CHANNEL
CONTROL

Remote Control Functions ........................25

Turning on the TV ........................................ 27

Channel Selection ....................................... 27

Volume Adjustment .................................... 27

Initial Setting ................................................. 28

MENU ADJUSTMENTS

On-Screen Menus Selection ....................30

Quick Menu .................................................... 31

Channel Menu ..............................................32

Picture Menu ................................................ 33

Audio Menu .................................................. 34

Time Menu ....................................................35

Option Menu ................................................. 36

Parental Control / Ratings ........................ 37

Input Menu .................................................... 39

My Media Menu ...........................................40

APPENDIX

Troubleshooting ...........................................42

Maintenance ................................................. 44

Product Specifications ...............................45

Open Source License .................................46

PC Setup ....................................................... 23

6

FEATURE OF THIS TV

a Some of these features are not available on all models.

High-definition television. High­resolution digital television
broadcast and playback
system composed of roughly
a million or more pixels, 16:9
aspect-ratio screens, and
AC3 digital audio. A subset of
digital television, HDTV formats
include 1080i and 720p
resolutions.

Displays HDTV programs in full
1920 x 1080p resolution for a
more detailed picture.

View videos and photos and
listen to music on your TV
through USB 2.0 (‘videos’
dependent on model).

Manufactured under license
from Dolby Laboratories.

Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.

HDMI Trademark Notice

“HDMI, the HDMI Logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC. in the United
States and other countries.”

IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN

a When a fixed image (e.g. logos, screen menus, video game, and computer display) is

displayed on the TV for an extended period, it can become permanently imprinted on
the screen. This phenomenon is known as “image burn” or “burn-in.” Image burn is
not covered under the manufacturer’s warranty.

a In order to prevent image burn, avoid displaying a fixed image on your TV screen for a

prolonged period (2 or more hours for LCD).

a Image burn can also occur on the letter-boxed

areas of your TV if you use the 4:3 aspect ratio
setting for an extended period.

7

PREPARATION

1.5V 1.5V

Accessories

Ensure that the following accessories are included with your TV. If an accessory is
missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images below.

PREPARATION

Option Extras

D-sub 15 pin cable

CD ManualOwner’s Manual

Power cablePolishing Cloth

When using the VGA (D-sub 15
pin cable) PC connection, the
user must use shielded signal
interface cables with ferrite cores
to maintain standards compliance.

Remote Control, Batteries (AAA)

x 8

(M4 x 12mm)

Stand screws

(T4 x 20mm)

Safety screw

8

Front Panel Information

r Image shown may differ from your TV.

CHANNEL
buttons

VOLUME
buttons

ENTER button

HOME button

INPUT button

POWER button

PREPARATION

Speaker

Power/Standby
Indicator

Remote Control
Sensor

NOTE

a Do not step on the glass stand or subject it to any impact.It may break, causing

possible injury from fragments of glass, or the TV may fall.

a Do not drag the TV. The floor or the product may be damaged.

9

AC IN

Back Panel Information

r Image shown may differ from your TV.

PREPARATION

1

32LV2400

2

3

4 5

42LV4400,
47LV4400,
55LV4400

4 5

Power Cord Socket

1 2

For operation with AC power.

Caution: Never attempt to operate
the TV on DC power.

HDMI/DVI IN, HDMI IN

3 4

Digital Connection.

Supports HD video and Digital audio.
Doesn’t support 480i.

Accepts DVI video using an adapter
or HDMI to DVI cable (not included).

10

76 8 9

76 8 9 10

USB INPUT

Used for viewing photos.

DVI/RGB AUDIO IN

Used for audio input.

RGB IN (PC)

5 6

Analog PC Connection. Uses a
D-sub 15 pin cable (VGA cable).

AV/COMPONENT IN

Analog Connection.

Supports HD.

Uses a red, green, and blue cable for
video & red and white for audio.

OPTICAL DIGITAL OUT

7 8

Digital optical audio output for
use with amps and home theater
systems.

Note: In standby mode, this port
doesn’t work.

ANTENNA/CABLE IN

9 10

Connect over-the-air or cable signals
to this jack.

AUDIO OUT

For use with external speakers.

HDMI IN 3

Digital Connection.

Supports HD video and Digital audio.
Doesn’t support 480i.

*

HDMI 3: For 42LV4400, 47LV4400,

55LV4400

CAUTION

For HDMI and USB INPUT

a For an optimal connection, HDMI cables and USB devices should have bezels

less than 10 mm (0.39 inches) thick.

Precautions when using the USB
device

a The recommended capacity is 1

TB or less for a USB external hard
disk and 32 GB or less for USB
memory.

*A is smaller or equals to 10 mm (0.39 inches)

PREPARATION

11

Stand Instructions

AC IN

AC IN

AC IN

AC IN

r Image shown may differ from your TV.

INSTALLATION DETACHMENT

PREPARATION

Carefully place the TV screen side

1 1

down on a cushioned surface to
protect the screen from damage.

Connect the base to the stand and

2 2

install the 8 screws into the holes as
shown.

*Use the safety screw

to secure the stand
on the table

(M4 x 8)

Carefully place the TV screen side
down on a cushioned surface to
protect the screen from damage and
remove the screws.

Detach the stand from the TV.

12

NOTE

a When assembling the desk type stand, make sure the screws are fully tightened

(If not tightened fully, the TV can tilt forward after the product installation). Do
not over tighten.

Desktop Pedestal Installation

r Image shown may differ from your TV.

For proper ventilation, allow a clearance of 10.1 cm (4 inches) on all four sides from the
wall.

10.1 cm (4 inches)

PREPARATION

10.1 cm
(4 inches)

10.1 cm (4 inches)

10.1 cm
(4 inches)

CAUTION

a Ensure adequate ventilation by following the clearance recommendations.

a Do not mount near or above any type of heat source.

Swivel Stand

After installing the TV, you can adjust the TV set manually to the left or right direction by
20º to suit your viewing position.

13

Securing the TV to the Wall to Prevent Falling
When the TV is Used on a Stand

r You should purchase necessary components to prevent the TV from tipping over.

r Image shown may differ from your TV.

PREPARATION

We recommend that you set up the TV close to a wall so it cannot fall over if pushed
backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in
a forward direction, potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

r Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as

shown in the picture.

* If your product has the bolts in the eye-bolts position before inserting the eye-bolts,

loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper

holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height
of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

14

r Use a sturdy rope (sold separately) to tie the product. It is safer

to tie the rope so it becomes horizontal between the wall and the
product.

NOTE

a Use a platform or cabinet strong enough and large enough to support the size

and weight of the TV.

a To use the TV safely make sure that the height of the bracket on the wall and the

one on the TV are the same.

VESA Wall Mounting

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other
building materials, please contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

Wall mounting bracket is sold separatedly.

VESA (A*B)

Model

32LV2400 100 * 100 M4 4

42LV4400 400 * 200 M6 4

A

B

Standard Screw Quantity

PREPARATION

47LV4400,

55LV4400

400 * 400 M6 4

NOTE

a Screw length needed depends on

the wall mount used. For further
information, refer to the instructions
included with the mount.

a Standard dimensions for wall mount

kits are shown in the table.

a When purchasing our wall mount kit,

a detailed installation manual and
all parts necessary for assembly are
provided.

a Do not use screws longer than the

standard dimension, as they may
cause damage to the inside to the
T V.

a For wall mounts that do not comply

with the VESA standard screw

specifications, the length of the
screws may differ depending on their
specifications.

a Do not use screws that do not comply

with the VESA standard screw
specifications.
Do not use fasten the screws too
strongly, this may damage the TV
or cause the TV to a fall, leading to
personal injury. LG is not liable for
these kinds of accidents.

a LG is not liable for TV damage or

personal injury when a non-VESA or
non specified wall mount is used or
the consumer fails to follow the TV
installation instructions.

CAUTION

a Do not install your wall mount kit while your TV is turned on. It may result in

personal injury due to electric shock.

Antenna or Cable Connection

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.

For optimum picture quality, adjust antenna direction if needed.

Wall
Antenna
Socket

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

PREPARATION

Outdoor
Antenna
(VHF, UHF)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

RF Coaxial Wire (75 Ω)

Copper Wire

Be careful not to bend the copper
wire when connecting the antenna.

2. Cable

Cable TV
Wall Jack

RF Coaxial Wire (75 Ω)

NOTE

a If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

a For much more information about antennas visit our Knowledgebase at http://

lgknowledgebase.com. Search for antenna.

15

EXTERNAL EQUIPMENT SETUP

Y L RPBP

R

1 2

r To prevent equipment damage, never plug in any power cords until you have finished

connecting all equipment.

r The pictures in this section may be slightly different from your model.

HD Receiver Setup

This TV can receive digital over-the-air/digital cable signals without an external digital
set-top box. However, if you do receive digital signals from a digital set-top box or other
digital external device.

EXTERNAL EQUIPMENT SETUP

Component Connection

1. How to connect

Connect the video outputs (Y, PB,

1

P

R) of the digital set-top box to

the COMPONENT IN VIDEO jack
on the TV. Match the jack colors
(Y = green, P
red).

Connect the audio output of

2

the digital set-top box to the
COMPONENT IN AUDIO jack on
the TV.

B = blue, and PR =

2. How to use

r Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box operation.)

r Select the Component input source on the TV using the INPUT button on the remote

control.

Y, CB/PB, CR/PR

Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz)

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

15.73

15.73

31.47

31.50

44.96

45.00

33.72

33.75

26.97

27.00

33.71

33.75

67. 4 32

67. 50

59.94

60.00

59.94

60.00

59.94

60.00

59.94

60.00

23.976

24.00

29.97

30.00

59.94

60.00

16

HDMI OUTPUT

1

HDMI Connection

1. How to connect

Connect the digital set-top box

1

to HDMI/DVI IN 1, 2, or 3* jack
on the TV.

No separate audio connection is

2

necessary.

HDMI supports both audio and
video.

2. How to use

r Turn on the digital set-top box.

(Refer to the owner’s manual for the digital
set-top box operation.)

r Select the HDMI 1, HDMI 2, or HDMI 3* input

source on the TV using the INPUT button on
the remote control.

* HDMI 3: For 42LV4400, 47LV4400,

55LV4400

NOTE

a If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no

screen display. In this case use the latest cables that support High Speed HDMI.

a HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1 kHz, 48 kHz), Linear

PCM (32 kHz, 44.1 kHz, 48 kHz)

HDMI-DTV

Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz)

720x480p

1280x720p

1920x1080i

1920x1080p

31.47

31.50

44.96

45.00

33.72

33.75

26.97

27.00

33.71

33.75

67. 4 32

67. 50

59.94

60.00

59.94

60.00

59.94

60.00

23.976

24.00

29.97

30.00

59.94

60.00

EXTERNAL EQUIPMENT SETUP

17

1

DVI OUTPUT

AUDIO

2

DVI to HDMI Connection

Y L RPBP

R

1 2

1. How to connect

Connect the digital set-top box

1

to HDMI/DVI IN 1 or 2 jack on
the TV.

Connect the digital set-top box

2

audio output to the DVI AUDIO
jack on the TV.

EXTERNAL EQUIPMENT SETUP

2. How to use

r Turn on the digital set-top box.

(Refer to the owner’s manual for the digital
set-top box operation.)

r Select the HDMI 1 or HDMI 2 input source on

the TV using the INPUT button on the remote
control.

NOTE

a A DVI to HDMI cable or adapter is required for this connection.

DVI doesn’t support audio, so a separate audio connection is necessary.

DVD Setup

Component Connection

1. How to connect

Connect the video outputs (Y, PB,

1

P

R) of the digital set-top box to

the COMPONENT IN VIDEO jack
on the TV. Match the jack colors
(Y = green, P
red).

Connect the audio output of

2

the digital set-top box to the
COMPONENT IN AUDIO jack on
the TV.

2. How to use

r Turn on the DVD player, insert a DVD.

r Select the Component input source on the TV using the INPUT button on the remote

control.

r Refer to the DVD player’s manual for operating instructions.

B = blue, and PR =

18

L R

VIDEO

AUDIO

1

Composite (RCA) Connection

HDMI OUTPUT

1

1. How to connect

Connect the AUDIO/VIDEO

1

jacks between TV and DVD.
Match the jack colors (Video =
yellow, Audio Left = white, and
Audio Right = red)

2. How to use

r Turn on the DVD player, insert a DVD.

r Select the AV input source on the TV

using the INPUT button on the remote
control.

r Refer to the DVD player’s manual for

operating instructions.

HDMI Connection

1. How to connect

EXTERNAL EQUIPMENT SETUP

Connect the digital set-top box

1

to HDMI/DVI IN 1, 2, or 3* jack
on the TV.

No separate audio connection is

2

necessary.

HDMI supports both audio and
video.

2. How to use

r Select the HDMI 1, HDMI 2, or HDMI 3* input

source on the TV using the INPUT button on
the remote control.

r Refer to the DVD player’s manual for

operating instructions.

* HDMI 3: For 42LV4400, 47LV4400,

55LV4400

NOTE

a If an HDMI cable doesn’t support High Speed HDMI, it can cause flickers or no

screen display. In this case use the latest cables that support High Speed HDMI.

a HDMI Audio Supported Format: Dolby Digital (32 kHz, 44.1 kHz, 48 kHz), Linear

PCM (32 kHz, 44.1 kHz, 48 kHz)

19