LG 32LT661HBZA INSTALLATION INSTRUCTIONS

INSTALLATION MANUAL

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

UT78**

UT76**

UT66**

UT64**

US34**

LT66**

ET96**

*MFL70423711*

(2005-REV08)

www.lg.com

Table of contents

ENGLISH

4 Location and Function of Controls

4 Parts and Button 4 Basic functions 4 LED Clock Connection

5 First Use Wizard

6 Basic Settings 6 - Language & Location 7 - Network Settings 8 - Portal Settings 9 - Voice Service Coverage

10 Data Cloning 10 Solution Settings

10 - Language & Location selection 11 - Automatically for Setup 15 - Manually for Setup

18 Installation Menu Settings 18 Access Installation menu for commercial feature

settings.

19 Installation Menu

19 Introduction 20 LG Hotel Mode

20 - Hotel Mode Operation 20 - Power On Status 21 - Volume 21 - Key Management 22 - Limited Mode 22 - DTV Programme Update 23 - Power On Default 23 - Aux Source Setting 23 - Power Management 23 - R adio Video Blank 23 - Factory Reset

24 Network 24 - MAC Address 24 - Network Settings 25 - LG Connect 25 - IP Stream Control 25 - Wake On LAN 25 - VLAN ID

26 - Server Settings 26 - Ping Test

27 Pro:Centric 27 - Mode 27 - WORF 27 - Room Number Setting 27 - Media Type 28 - Receive Data 28 - Native EPG

29 General 29 - Configuration Setup 34 - External Speaker 34 - Set ID Setup 34 - Power Saving 35 - HCEC Setup 36 - Clock Setup 36 - Password Change 37 - Lock Mode 37 - Crestron 37 - Welcome Video Mode 37 - Developer Mode

38 Portal Settings 38 - Portal Mode 38 - Auto Start 38 - PreLoaded App 39 - Website Shortcut 39 - Input Shortcut 40 - Hotel Directory 40 - Portal Editor 40 - Portal Manager

43 Media Share 43 - SmartShare 43 - Screen Share 43 - Media Renderer 43 - DIAL 43 - TV Name 44 - SoftAP 45 - Beacon

46 TV Manager 46 - Diagnostics 51 - USB Download Menu

56 CONTENT MANAGER 56 - Web Login

56 - Content Manager 60 - Group Manager 2.0

62 IR Codes

63 External control device Setup

63 RS-232C Setup 63 Phone jack Type 63 Type of Connector : D-Sub 9-Pin Male 64 RS-232C Configurations 64 Communication Parameters 64 IR OUT Using Guide

64 - Suitable / Not Recommend remote-controller data

format

64 - IR Receiver specifications 65 Command Reference List 66 Transmission / Receiving Protocol

ENGLISH

Location and Function of Controls

ENGLISH

Parts and Button

Basic functions

LED Clock Connection

(Depending on model)

This TV can be connected to a LED Clock via the CLOCK port.

CLOCK

LED Clock

(*Not Provided)

Power On (Press)

Power O1 (Press and Hold)

Menu Control (Press2)

Menu Selection (Press and Hold3)

1 All running apps will close. 2 You can access and adjust the menu by pressing the button when

TV is on.

3 You can use the function when you access menu control.

First Use Wizard

* Images shown may differ from your TV.

(Depending on model)

• There are four options - Basic Settings, Data Cloning, Solution Settings, and Installation Menu Settings. Each menu can access by START button.

ENGLISH

Basic Settings

ENGLISH

(Depending on model)

This menu is for basic settings related to language, network, portal, voice service coverage and programme tuning without SI (Pro:Centric) setting. There are four steps for it.

Language & Location

(Depending on model)

• Select the Language and Country. Some countries need to select the Time Zone.

Network Settings

(Depending on model)

• Set Network connection. You can connect easily to wired/wireless network. (“Network Settings” on page 24)

ENGLISH

Portal Settings

ENGLISH

(Depending on model)

• Set the Portal Mode and Portal Auto Start.

Portal Mode

• You can select ‘Default Portal’ (Use webOS default portal), ‘Customizable Portal’ (Use editable Portal), or ‘None’ (Do not use portal).

Portal Auto Start

• You can select ‘On’ or ‘Off ’. If you select ‘On’, Portal (Home Launcher) will be execute automatically after TV on.

Voice Service Coverage

(Depending on model)

• Set the voice service coverage. You can set LG Service Country and Ser vice Area Postcode(Depending on model) for voice service.

ENGLISH

Data Cloning

ENGLISH

(Depending on model)

Access Data cloning menu of TV Manager application for applying cloning le.

Solution Settings

(Depending on model)

The Pro:Centric Platform enables you to simply install, manage and use guest- centric solutions. The default Domain “procentric.local” and IP Server Address are needed to be registered in DNS TV will contact the IP Ser ver using the default Domain “procentric.local” via IP on server search page. If TV doesn’t contact the Server, TV will search the pre- dened programme earlier than all programmes. (Only DVB-C)

The frequencies of pre-dened programmes are below.

• Germany: ‘51000, 858000, 778000, 698000, 618000, 538000, 458000, 378000, 298000, 218000, 138000 khz’.

• Philippines 6 Mhz: ‘57000, 651000, 591000, 531000, 471000, 411000, 351000, 291000, 231000, 171000, 111000 khz’.

• Other Country: ‘50000, 842000, 762000, 682000, 602000, 522000, 442000, 362000, 282000, 202000, 122000 khz’.

Language & Location selection

(Depending on model)

• Please select the Language and Country. Some countries need to select the Time Zone.

Automatically for Setup

(Depending on model)

1 From the TV Conguration Options screen, you can choose how to proceed with the conguration of this TV. Whether you will congure the T V

for Pro:Centric operation via the wizard or use a USB memory device to congure the TV, you may rst wish to set the Room Number on the TV. Also, you can congure the network environment.

• Complete initial download of maintenance(On/Off Toggle): you can choose the option whether to skip the maintenance files download during the EZ-Manager process.

• If you intend to set Room Number as part of the TV configuration, use the Room Number option to assign the Room # for this T V before you continue with additional configuration.

• In the Label field, use the Left/Right arrow keys to specify a North, South, East, or West designation for this TV.

• In the Room Number field, you can use the number keys on the Installation Remote to direct enter a room number or use the vir tual keyboard on the TV screen.

ENGLISH

• If you intend to apply the files via USB, use USB Configuration option to access TV Manager app. (“TV Manager” on page 46)

• To continue, move and select NEX T.

• If you intend to set network, use the Network Settings option. You can connect easily to wired/wireless network by this option. (“Network Settings” on page 24)

2 This step automatically searches for the Pro:Centric Ser ver. If was found the Pro:Centric data programme, select the NEXT.

ENGLISH

3 Downloading the Pro:Centric application les takes few minutes.

ENGLISH

4 After the installation is completed, the following screen will be displayed.

Manually for Setup

(Depending on model)

1 Select a Label and/or enter the Room Number using the numeric keypad on the remotes or using the virtual keyboard on the TV screen. To

continue, move and select NEXT.

2 Please select the MANUAL PRO:CENTRIC.

ENGLISH

3 Congure the appropriate Pro:Centric settings in the TV. (Taiwan does not support RF)

ENGLISH

4 Downloading the Pro:Centric application les takes few minutes.

ENGLISH

5 After the installation is completed, the following screen will be displayed.

ENGLISH

Installation Menu Settings

(Depending on model)

Access Installation menu for commercial feature settings.

Installation Menu

* Images shown may differ from your TV.

Introduction

The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’.

The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators.

1 Press the Setting button for more than 5 seconds using the user remote control, banner will appear at top left on the screen. 2 Enter a four digit password and press button.

- The TV is set with the initial password “1-1-0-5”.

ENGLISH

LG Hotel Mode

ENGLISH

When ‘Hotel Mode Operation’ is set to On, all functions of Hotel Mode apply.

Hotel Mode Operation

(Depending on model)

• Decide to work all functions of ‘Hotel Mode Operation’ or not.

• When ‘Hotel Mode Operation’ is set to On, all functions of Hotel Mode apply.

• When ‘Hotel Mode Operation’ is set to Off, all functions of Hotel Mode Do Not apply.

Power On Status

• Decide to select working status of TV Set when turn on main power.

• You can select PWR, STD, LST.

• PWR always make TV set On status when turn on main power.

• STD make Stand-by status when turn on main power.

• LST make TVSet work like previous power status. As same concept as Power Backup mode; If main power were turned off in Power On status, TVSet would work in On status. If main power were turned off in Stand-by status, TVSet would work in Stand-by status.

• If there Block All is both IR Operation and Local Key Operation from Key Management, In order to provide the Option that must be able to turn on the TV in the TV turned off situation, change the value of the PWR. (Reference the Key Management)

Volume

• Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’ as On or Off.

• (0 ≤ Min ≤ Start ≤ Max ≤ 100)

Start Volume

• This entry sets the start volume level when is power on.

-The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max)

-The default setting is ‘Off’.

-When selected to 'On', if the value is lower then the minimum specified in the minimum volume entry, the minimum volume entry must be used.

-When selected to 'On', if the value is larger then the maximum specified in the maximum volume entry, the maximum volume value must be used.

-Access to a volume in ‘Timer Power On’ must be fixed to start volume when ‘Hotel Mode Operation’ (On) and ‘Start Volume’ (Off, 0 ~

100) were set simultaneously.

Maximum Volume

• This entry sets the maximum volume level the set. The level is specified as a number bet ween ‘Minimum Volume’ to 100. (Min ≤ Max ≤ 100).

-The default value is 100.

Minimum Volume

• This entry sets the minimum volume level the set. The level is specified as a number bet ween 0 to ‘Maximum Volume’. (0 ≤ Min ≤ Max)

-The default value is 0.

Key Management

• Manage key usability of Local(Front) Key and Remote Control. When selected to ‘On’, following ‘IR Operation’ and ‘Local Key Operation’ will be worked by below.

ENGLISH

IR Operation

• Decide whether work the LG remote control or not.

-When ‘IR Operation’ is set to 'Normal', all remote keys are available.

-'Use PWR Only' makes block all remote keys except power key.

-When ‘IR Operation’ is set to 'Block All', all normal remote keys don’t work.

Local Key Operation

• Decide to operate 'Local Key' working behavior.

-When ‘Local Key Operation’ is set to 'Normal', all local keys are available.

-'Use PWR Only' makes block all local keys except power key.

-When ‘Local Key Operation’ is set to 'Block All', all local keys don’t work.

Limited Mode

ENGLISH

(Depending on model)

• Configure TV function’s limitation. When selected to ‘On’, following sub-menus will be worked by below.

Setup Menu

• Permit to tune and manage programmes.

Programme Change

• Decide to change programme or not by setting ‘Programme Change' as ‘On’(Change Possible) or ‘Off’(Change Impossible) when present source is TV.

Menu Display

• Function to decide whether work with menu of control key or not.

-Although select Off, the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ is available.

-When select On, Menu works.

OSD Display

• Decide to display OSD or not.

-When set to ‘O ff’, all OSD is not displayed except some exception.

-Although select ‘Off’, the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ and entering service menu are available. (In-Start, Power-Only, Adjust, Installation Menu...)

System Provider Mode

• ‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows:

-When value is ‘O n’, Accessible Items on the menu system, others are not permissible. (Depending on model) » Input select screens » Sleep timer » Aspect Ratio » Subtitles » Programmes (Except for Programme Tuning & Settings and Programme Manager)

DTV Programme Update

• It is a mode to set whether to update DTV Programme automatically or not.

• When set to ‘Auto’, the function to update TV’s programme map according to DTV programme’s stream information.

• When set to ‘Manual’, DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though DTV programme’s information is changed.

+ 49 hidden pages