LG 32LF5100-TA, 32LF510T-TA, 32LF510Y-TA, 32LF510B-TC, 32LF510D-TC Instruction manual

LED TV

LF51**

www.lg.com

AAA

AAA

X 4

(M4 X L14)

: Depending on model / Selon le modèle / Dependendo do modelo /

P/No: MFL68683734 (1510-REV04)

Printed in Korea

i

1

1

2

1

2

A

B

3

4

LR

2

A

DC-IN

(19 V )

A

VIDEO

USB IN

( )

MONO

AUDIOLR

IN

ANTENNA /

CABLE IN

AUDIOVIDEO

VIDEO

( )

MONO

AUDIO

3

4

2

DC-IN

(19 V )

1

DC-IN

(19 V )

: Depending on model / Selon le modèle / Dependendo do modelo /

3

1

2

5

1

2

6

43

1

: Depending on model / Selon le modèle / Dependendo do modelo /

2

43

A

F

BE

G

1

x B x C (mm)

A

x E x F (mm)

A

D

(kg)

- (

D

+

G

1

G

2

D

32LF5100-TA
32LF510T-TA
32LF510Y-TA
32LF510B-TC
32LF510D-TC
32LF510Z-TC

734 x 474 x 172 976 x 621 x 208.7 1108 x 696 x 208.7

734 x 438 x 71 976 x 583 x 81.5 1108 x 657 x 81.5

4.7 8.5 10.9

) (kg)

G

2

4.5 8.2 10.6

19 V 1.6 A 19 V 2.5 A 19 V 3.2 A

C

43LF5100-TA
43LF510T-TA
43LF510Y-TA
43LF510B-TC
43LF510D-TC
43LF510Z-TC

49LF5100-TA
49LF510T-TA
49LF510Y-TA
49LF510B-TC
49LF510D-TC
49LF510Z-TC

*MFL68683734*

OWNER’S MANUAL

Safety and Reference

LED TV*

* Disclaimer

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your
set and retain it for future reference.

*MFL68761002*

www.lg.com

P/NO : MFL68761002 (1510-REV06)

Printed in Korea

India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)

ATTENTION:

This product is qualied for the BEE Star rating in the ‘Home’ Mode.

The Objectives of Star Labeling Program is designed to promote energy ecient products and practices.

When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.

•  Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.

•  Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated energy

consumption.

To reset the television to Star rating qualied settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.

ENGLISH

Safety instructions

Please read these safety precautions carefully before using the product.

WARNING

Make sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on
earth.) Otherwise possibility you may be electrocuted or injured.

Do not place the TV and/or remote control in the following
environments:

•  A location exposed to direct sunlight

•  An area with high humidity such as a bathroom

•  Near any heat source such as stoves and other devices that

produce heat

•  Near kitchen counters or humidiers where they can easily be
exposed to steam or oil

•  An area exposed to rain or wind

•  Near containers of water such as vases

Otherwise, this may result in re, electric shock, malfunction or product
deformation.

Do not place the product where it might be exposed to dust. This may
cause a re hazard.

Mains Plug is the TV connecting/disconnecting device to AC mains
electric supply. This plug must remain readily attached and operable
when TV is in use.

Do not touch the power plug with wet hands. Additionally, if the cord
pin is wet or covered with dust, dry the power plug completely or wipe
dust o. You may be electrocuted due to excess moisture.

Insert power cable plug completely into wall socket otherwise if not
secured completely into socket, re ignition may break out.

Ensure the power cord does not come into contact with hot objects
such as a heater. This may cause a re or an electric shock hazard.

Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in re or electric shock.

Bend antenna cable between inside and outside building to prevent
rain from owing in. This may cause water damaged inside the Product
and could give an electric shock.

When mounting TV onto wall make sure to neatly install and isolate
cabling from rear of TV as to not create possibility of electric shock /
re hazard.

3

ENGLISH

Do not plug too many electrical devices into a single multiple electrical
outlet. Otherwise, this may result in re due to over-heating.

Do not put or store inammable substances near the product. There is a
danger of combustion/explosion or re due to careless handling of the
inammable substances.

Do not drop the product or let it fall over when connecting external
devices. Otherwise, this may result in injury or damage to the product.

Keep the anti-moisture packing material or vinyl packing out of the
reach of children. Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suocation. Keep it out
of the reach of children.

Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.

Dispose of used batteries carefully to ensure that a small child does not
consume them. Please seek Doctor- Medical Attention immediately if
child consumes batteries.

Do not drop metallic objects such as coins, hair pins, chopsticks or wire
into the product, or inammable objects such as paper and matches.
Children must pay particular attention. Electrical shock, re or injury
can occur. If a foreign object is dropped into the product, unplug the
power cord and contact the service centre.

Do not spray water on the product or scrub with an inammable
substance (thinner or benzene). Fire or electric shock accident can
occur.

Do not allow any impact, shock or any objects to fall into the unit,
and do not drop anything onto the screen. You may be injured or the
product can be damaged.

Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.

Do not insert any metal objects/conductors (like a metal chopstick/
cutlery/screwdriver) between power cable plug and input Wall Socket
while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging into the wall input
terminal. You may be electrocuted. (Depending on model)

4

Never touch the wall outlet when there is leakage of gas, open the
windows and ventilate. It may cause a re or a burn by a spark.

ENGLISH

Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.

Only use an authorized AC adapter and power cord approved by
LG Electronics. Otherwise, this may result in re, electric shock,
malfunction or product deformation.

If any of the following occur, unplug the product immediately and
contact your local service centre.

•  The product has been impacted by shock

•  The product has been damaged

•  Foreign objects have entered the product

•  The product produced smoke or a strange smell

This may result in re or electric shock.

Unplug the TV from AC mains wall socket if you do not intend to use the
TV for a long period of time. Accumulated dust can cause re hazard
and insulation deterioration can cause electric leakage/shock/re.

Apparatus shall not be exposed to dripping or splashing and no objects
lled with liquids, such as vases, shall be placed on the apparatus.

Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.

Never Disassemble the AC adapter or power cord. This may result in re
or electric shock.

Be careful in handling the adapter to prevent any external shocks to it.
An external shock may cause damage to the adapter.

CAUTION

Install the product where no radio wave occurs.

There should be enough distance between an outside antenna and
power lines to keep the former from touching the latter even when the
antenna falls. This may cause an electric shock.

If water enters or comes into contact with TV, AC adapter or power
cord please disconnect the power cord and contact service centre
immediately. Otherwise, this may result in electric shock or re.

Do not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the
product cannot be fully supported. Otherwise, the product may fall or
ip over, which may cause injury or damage to the product.

5

ENGLISH

If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.

If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), x
it carefully so as not to drop.

Only use the attachments / accessories specied by the manufacturer.

When installing the antenna, consult with a qualied service
technician. If not installed by a qualied technician, this may create a
re hazard or an electric shock hazard.

We recommend that you maintain a distance of at least 2 to 7 times
the diagonal screen size when watching TV. If you watch TV for a long
period of time, this may cause blurred vision.

Batteries should not be exposed to excessive heat. For example, keep
away from direct Sunlight, open replace and electric heaters.

Do not place non-rechargeable batteries in charging device.

Make sure there are no objects between the remote control and its
sensor.

Signal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, uorescent lighting. If this occurs turn o lighting
or darken viewing area.

When connecting external devices such as video game consoles, make
sure the connecting cables are long enough. Otherwise, the product
may fall over, which may cause injury or damage the product.

Only use the specied type of battery. This could cause damage to the
remote control.

Do not mix new batteries with old batteries. This may cause the
batteries to overheat and leak.

6

Do not turn the product On/O by plugging-in or unplugging the power
plug to the wall outlet. (Do not use the power plug for switch.) It may
cause mechanical failure or could give an electric shock.

Please follow the installation instructions below to prevent the product
from overheating.

•  The distance between the product and the wall should be more
than 10cm.

•  Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).

•  Do not install the product on a carpet or cushion.

•  Make sure the air vent is not blocked by a tablecloth or curtain.

Otherwise, this may result in re.

ENGLISH

Take care not to touch the ventilation openings when watching the TV
for long periods as the ventilation openings may become hot. This does
not aect the operation or performance of the product.

Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.

Prevent dust collecting on the power plug pins or outlet. This may cause
a re hazard.

Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the cord
exits the appliance.

When cleaning the product and its components, unplug the power
rst and wipe it with a soft cloth. Applying excessive force may cause
scratches or discolouration. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,
benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in re, electric shock or product damage
(deformation, corrosion or breakage).

As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn o this unit
by SWITCH.

When unplugging the cable, grab the plug and unplug it, by pulling at
the plug.

Don’t pull at the cord to unplug the power cord from the power board,
as this could be hazardous.

When moving the product, make sure you turn the power o rst. Then,
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a re
hazard or cause electric shock.

Do not press strongly upon the panel with a hand or sharp object such
as nail, pencil or pen, or make a scratch on it, as it may causedamage
to screen.

Avoid touching the screen or holding your nger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.

When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.

Contact the service centre once a year to clean the internal parts of the
product.
Accumulated dust can cause mechanical failure.

7

ENGLISH

Displaying a still image for a prolonged period of time may cause image
sticking. Avoid displaying a xed image on the TV screen for a long
period of time.

Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

If the product feels cold to the touch, there may be a small “icker”
when it is turned on. This is normal, there is nothing wrong with
product.

The panel is a high technology display product with resolution of two
million to six million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1ppm on the panel. This
does not indicate a malfunction and does not aect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.

You may nd dierent brightness and color of the panel depending on
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.

Generated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning
o the TV is generated by plastic thermal contraction due to tempera­ture and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
This generated sound does not aect the performance and reliability
of the product.

Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.

8

ENGLISH

Viewing 3D imaging (Only 3D
models)

WARNING

Viewing Environment

•  Viewing Time

- When watching 3D contents, take 5 to 15 minute breaks every

hour. Viewing 3D contents for a long period of time may cause
headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or
chronic illness

•  Some users may experience a seizure or other abnormal symptoms
when they are exposed to a ashing light or particular pattern
from 3D contents.

•  Do not watch 3D videos if you feel nausea, are pregnant and/ or
have a chronic illness such as epilepsy, cardiac disorder, or blood
pressure disease, etc.

•  3D Contents are not recommended to those who suer from stereo
blindness or stereo anomaly. Double images or discomfort in
viewing may be experienced.

•  If you have strabismus (cross-eyed), amblyopia (weak eyesight) or
astigmatism, you may have trouble sensing depth and easily feel
fatigue due to double images. It is advised to take frequent breaks
than the average adult.

•  If your eyesight varies between your right and left eye, correct your
eyesight prior to watching 3D contents.

Symptoms which require discontinuation or
refraining from watching 3D contents

•  Do not watch 3D contents when you feel fatigue from lack of sleep,
overwork or drinking.

•  When these symptoms are experienced, stop using/watching 3D
contents and get enough rest until the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may

include headache, eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image, visual inconvenience or
fatigue.

CAUTION

Viewing Environment

•  Viewing Distance

- Maintain a distance of at least twice the screen diagonal length

when watching 3D contents. If you feel discomfort in viewing 3D
contents, move further away from the TV.

Viewing Age

•  Infants/Children

- Usage/ Viewing 3D contents for children under the age of 5 are

prohibited.

- Children under the age of 10 may overreact and become overly

excited because their vision is in development (for example:
trying to touch the screen or trying to jump into it). Special
monitoring and extra attention is required for children watching
3D contents.

- Children have greater binocular disparity of 3D presentations

than adults because the distance between the eyes is
shorter than that of adults. Therefore they will perceive more
stereoscopic depth compared to adults for the same 3D image.

•  Teenagers

- Teenagers under the age of 19 may react with sensitivity due

to stimulation from light in 3D contents. Advise them to refrain
from watching 3D contents for a long time when they are tired.

•  Elderly

- The elderly may perceive less 3D eect compared to the young.

Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

•  Make sure to use LG 3D glasses. Otherwise, you may not be able to
view 3D videos properly.

•  Do not use 3D glasses instead of your normal glasses, sunglasses or
protective goggles.

•  Using modied 3D glasses may cause eye strain or image
distortion.

•  Do not keep your 3D glasses in extremely high or low
temperatures. It will cause deformation.

•  The 3D glasses are fragile and are easily scratched. Always use a
soft, clean piece of cloth when wiping the lenses. Do not scratch
the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.

9

ENGLISH

<

Preparing

NOTE

•  Image shown may dier from your TV.

•  Your TV’s OSD (On Screen Display) may dier slightly from that

shown in this manual.

•  The available menus and options may dier from the input source
or product model that you are using.

•  New features may be added to this TV in the future.

•  The TV can be placed in standby mode in order to reduce the power

consumption. And the TV should be turned o if it will not be
watched for some time, as this will reduce energy consumption.

•  The energy consumed during use can be signicantly reduced if the
level of brightness of the picture is reduced, and this will reduce
the overall running cost.

•  The items supplied with your product may vary depending on the
model.

•  Product specications or contents of this manual may be changed
without prior notice due to upgrade of product functions.

•  For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not t into your TV’s USB port.

CAUTION

•  Do not use any unapproved items to ensure the safety and product
life span.

•  Any damage or injuries caused by using unapproved items are not
covered by the manufacturer’s warranty.

•  Some models have a thin lm attached on to the screen and this
must not be removed.

•  When attaching the stand to the TV set, place the screen facing
down on a cushioned table or at surface to protect the screen
from scratches.

•  Make sure that the screws are fastened completely. (If they are
not fastened securely enough, the TV may tilt forward after being
installed.) Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten correctly.

Separate purchase

Separate purchase items can be changed or modied for quality
improvement without any notication. Contact your dealer to buy
these items. These devices only work with certain models. The model
name or design may be changed depending on the upgrade of product
functions, manufacturer’s circumstances or policies.

B

A

•  Use a certied cable with the HDMI logo attached.

•  If you do not use a certied HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/TM cable (3 m or less)

- High-Speed HDMI®/TM cable with Ethernet (3 m or less)

B

*A < 10 mm

18 mm

A

*B

(Depending on model)

AG-F***

Cinema 3D glasses

LG Audio Device

AG-F***DP

Dual play glasses

10

ENGLISH

Maintenance

Lifting and moving the TV

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend the
product lifespan.

•  Make sure to turn the power o and disconnect the power cord and
all other cables rst.

•  When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.

•  Avoid touching the screen at all times, as this may result in damage
to the screen.

•  Do not push, rub, or hit the screen surface with your ngernail or a
sharp object, as this may result in scratches and image distortions.

•  Do not use any chemicals as this may damage the product.

•  Do not spray liquid onto the surface. If water enters the TV, it may

result in re, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move the TV in the box or packing material
that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and
all cables.

•  When holding the TV, the screen should face away from you to
avoid damage.

•  Hold the top and bottom of the TV frame rmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.

•  When transporting a large TV, there should be at least 2 people.

•  When transporting the TV by hand, hold the TV as shown in the

following illustration.

•  When transporting the TV, do not expose the TV to jolts or
excessive vibration.

•  When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.

•  Do not apply excessive pressure to cause exing /bending of frame
chassis as it may damage screen.

•  When handling the TV, be careful not to damage the protruding
joystick button.

CAUTION

•  Avoid touching the screen at all times, as this may result in damage
to the screen.

•  Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.

11

ENGLISH

Using the joystick button

(Image shown may dier from your TV.)

You can simply operate the TV functions, pressing or moving the joystick
button up, down, left or right.

NOTE

•  LF51 series does not have a Joystick button but has only a power
On/O button.

Joystick Button

Basic Functions

NOTE

•  When your nger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button rst, you may not be able to adjust the
volume level and saved programmes.

Mounting on a table

(Image shown may dier from your TV.)

1 Lift and tilt the TV into its upright position on a table.

•  Leave a 10 cm (minimum) space from the wall for proper
ventilation.

10 cm

10 cm

10 cm

10 cm

10 cm

Power On

Power O

Volume
Control

Programmes
Control

When the TV is turned o, place your
nger on the joystick button and
press it once and release it.

When the TV is turned on, place your
nger on the joystick button and
press it once for a few seconds and
release it. (However, if the Menu
button is on the screen, pressing and
holding the joystick button will let
you exit the Menu.)

If you place your nger over the
joystick button and move it left or
right, you can adjust the volume level
you want.

If you place your nger over the
joystick button and move it up or
down, you can scrolls through the
saved programmes you want.

Adjusting the Menu

When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
right.

Turns the power o.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

Accesses the main menu.

2 Connect the power cord to a wall outlet.

CAUTION

•  Do not place the TV near or on sources of heat, as this may result in
re or other damage.

WARNING

If a television is not positioned in a suciently stable location, it can
be potentially hazardous due to falling. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:

•  Using cabinets or stands recommended by the manufacturer of

the television.

•  Only using furniture that can safely support the television.

•  Ensuring the television is not overhanging the edge of the

supporting furniture.

•  Not placing the television on tall furniture (for example, cupboards

or bookcases) without anchoring both the furniture and the
television to a suitable support.

•  Not standing the televisions on cloth or other materials placed

between the television and supporting furniture.

•  Educating children about the dangers of climbing on furniture to

reach the television or its controls.

12

ENGLISH

Using the kensington security
system

(This feature is not available for all models.)

•  Image shown may dier from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the oor. When you attach the TV to other building materials, please
contact qualied personnel. LG recommends that wall mounting be
performed by a qualied professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing xed wall mounts.

Securing the TV to a wall

(This feature is not available for all models.)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back

of the TV.

•  If there are bolts inserted at the eye-bolts position, remove the

bolts rst.

2 Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-bolts on the rear
of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the at surface.

CAUTION

•  Make sure that children do not climb on or hang on the TV.

NOTE

•  Use a platform or cabinet that is strong and large enough to

support the TV securely.

•  Brackets, bolts and ropes are not provided. You can obtain

additional accessories from your local dealer.

10 cm

Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.

10 cm

10 cm

10 cm

Separate purchase(Wall Mounting Bracket)

32/39LF56**
32LF55**

Model

VESA (mm) (A x B) 200 x 200 300 x 300

Standard screw M6 M6

Number of screws 4 4

Wall mount
bracket

Model

VESA (mm) (A x B) 300 x 300 400 x 400

Standard screw M6 M6

Number of screws 4 4

Wall mount
bracket

Model 60LF56**

VESA (mm) (A x B) 400 x 400

Standard screw M6

Number of screws 4

Wall mount
bracket

32LF62**
32/43LF51**
40/43UF67**
40/43LF57**
43LF54**

LSW240B
MSW240

60/65UF67** 42/47/50/55LF56**

LSW350B

LSW440B

49/55UF67**
49LF54**
49LF51**

LSW350B
MSW240

42/49/55LF55**
42/49/55LF62**

LSW440B
MSW240

13

ENGLISH

A

B

CAUTION

•  Disconnect the power rst, and then move or install the TV.
Otherwise electric shock may occur.

•  Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.

•  If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or qualied personnel.

•  Do not over tighten the screws as this may cause damage to the TV
and void your warranty.

•  Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the manufacturer’s warranty.

NOTE

•  Use the screws that are listed on the VESA standard screw
specications.

•  The wall mount kit includes an installation manual and necessary
parts.

•  The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.

•  The length of screws may dier depending on the wall mount.
Make sure to use the proper length.

•  For more information, refer to the manual supplied with the wall
mount.

•  When installing the wall mounting bracket, use the adhesive
label provided. The adhesive label will protect the opening from
accumulating dust and dirt. (Only when the label is provided)

Provided Item

Adhesive label

•  When attaching a wall mounting bracket to the TV, insert the wall
mount spacers into the TV wall mount holes to adjust the vertical
angle of the TV. (Only when the item of the following form is provided)

Provided Item

Wall Mount Spacer

14

Connections (notications)

Connect various external devices to the TV and switch input modes to select
an external device. For more information of external device’s connection, refer
to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio systems,
USB storage devices, PC, gaming devices, and other external devices.

NOTE

•  This model supports 4K (ULTRA HD) videos only in HDMI input.
(Only UF67**)

•  ULTRA HD videos are not supported in the tuner or USB input.
(Only UF67**)

•  The external device connection may dier from the model.

•  Connect external devices to the TV regardless of the order of the

TV port.

•  If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.

•  Refer to the external equipment’s manual for operating instructions.

•  If you connect a gaming device to the TV, use the cable supplied

with the gaming device.

•  In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear.

•  In PC mode, some resolution settings may not work properly
depending on the graphics card.

•  If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance. (Only UF67**)

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•  Use a signal splitter to use more than 2 TVs.

•  If the image quality is poor, install a signal amplier properly to

improve the image quality.

•  If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.

•  An antenna cable and converter are not supplied.

•  Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

Antenna Booster

(Depending on model)

•  This feature improves the sensitivity to weak RF Signal in poor
reception areas. LG’s built-in booster is auto-activated at weak
signal level. It strengthens signal level and minimizes picture
colour noise.

•  This feature is auto-controlled by processor and no user
intervention required.

ENGLISH

Adapter connection

(Depending on model)

CAUTION

•  Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV’s power plug to a wall power outlet.

Satellite dish connection

(Only satellite models)

Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω).

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.

NOTE

•  Supported HDMI Audio format :
Dolby Digital (32 kHz, 44.1 kHz, 48 kHz),
DTS (44.1 kHz, 48 kHz),
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
(Depending on model)

HDMI ULTRA HD deep colour
settings

(Only UF67**)

•  SETTINGS PICTURE HDMI ULTRA HD Deep Colour
HDMI (1/2) ULTRA HD Deep Colour

- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off : Support 4K @ 50/60 Hz (4:2:0)

•  All HDMI ports support the HDCP 2.2.

•  4K Source is only supported in HDMI input.

•  4K signal and content are not available in the RF/USB input.

•  All HDMI input ports support 4K @ 50/60 Hz (For details on the

supported specications, refer to the table below.) for high­denition video. Picture or sound may not be supported depending
on the specications of the external device connected. In that case,
change the settings for HDMI ULTRA HD Deep Colour.

4K @ 50/60 Hz Support Format

Resolution

3840 x 2160p
4096 x 2160p

1 : Only supported when HDMI ULTRA HD Deep Colour turned “On”.

Frame rate

(Hz)

50.00

59.94

60.00

Colour Depth /

Chroma Sampling

8 bit 10 bit 12 bit

YCbCr 4:2:0 YCbCr 4:2:0

1

YCbCr 4:2:2

YCbCr 4:4:41- -

1

RGB 4:4:4

- -

Remote control

(Depending on model)

The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.

CAUTION

•  Do not mix old and new batteries, as this may damage the remote
control.

•  In Analogue TV and some countries, some remote control buttons
may not work.

•  The remote control will not be included for all sales market.

Make sure to point the remote control toward the remote control sensor
on the TV.

1

1

2

A

CI module connection

(Depending on model)

View the encrypted (pay) services in digital TV mode.

•  Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.

•  If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

3

B

15

ENGLISH

A

C

(POWER) Turns the TV on or o.

Selects Radio, TV and DTV programme.

Recalls your preferred subtitle in digital mode.

1

Resizes an image. (Depending on model)

1

Shows programme guide. (Depending on model)
By pressing the AD button, audio descriptions function will

1

be enabled. (Depending on model)

1

Selects an AV mode. (Depending on model)

2

Selects an AV mode. (Depending on model)

2

Resizes an image. (Depending on model)

2

Accesses the main menus. (Depending on model)

Changes the input source.

Number buttons Enters numbers.

Accesses the saved programme list.

Returns to the previously viewed programme.

B

Accesses your favourite programme list.

3

Shows programme guide. (Depending on model)

3

Used for viewing 3D video. (Depending on model)

Mutes all sounds.

Adjusts the volume level.

Scrolls through the saved programmes.
Moves to the previous or next screen.

4

5

7

8

6

C

Teletext buttons ( ) These buttons are used for
teletext.

Views the information of the current programme and

screen.

4

Accesses the main menus. (Depending on model)

4

Switches the BOLLYWOOD sound mode.

(Depending on model)

7

Use this to view 3D video option. (Depending on

model)

Accesses the Quick menus.

Navigation buttons (up/down/left/right) Scrolls through menus
or options.

Selects menus or options and conrms your input.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

D

5

By Pressing AD button, audio descriptions function will be

enabled. (Depending on model)

5

Selects an AV mode. (Depending on model)

5

Switches the BOLLYWOOD sound mode.

(Depending on model)

6

/ Starts to record and displays record menu.

(Only Time Machine

6

Starts to record and displays record menu.

(Only Time Machine

8

Returns to LIVE TV. (Depending on model)

Control buttons ( ) Controls the MY MEDIA

menus, Time Machine
devices (USB, SIMPLINK or Time Machine
Coloured buttons These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)

Ready

supported model) (Depending on model)

Ready

supported model) (Depending on model)

Ready

control or the SIMPLINK compatible

Ready

).

16

D

ENGLISH

Licenses

Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

The terms HDMI and HDMI High-Denition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.

This DivX Certied® device has passed rigorous testing to ensure it
plays DivX® video.

To play purchased DivX movies, rst register your device at vod.divx.
com. Find your registration code in the DivX VOD section of your
device setup menu.

DivX Certied® to play DivX® video up to HD 1080p, including
premium content.

DivX®, DivX Certied® and associated logos are trademarks of DivX,
LLC and are used under license.

Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274.

(Only LF62**, UF67**)

For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks, and DTS 2.0+Digital Out
is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

Open source software
notice information

To obtain the source code under GPL, LGPL, MPL and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.

In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
[e-mail]. This oer is valid for three (3) years from the date
on which you purchased the product.

Settings

Automatically Setting Up Programme

SETTINGS SETUP Auto Tuning

Automatically tunes the programmes.

•  If Input Source is not connected properly, programme registration
may not work.

•  Auto Tuning only nds programmes that are currently
broadcasting.

•  If Lock System is turned on, a pop-up window will appear asking
for password.

To select Picture Mode

SETTINGS PICTURE Picture Mode

Select the picture mode optimized for the viewing environment or the
programme.

•  Vivid : Heightens contrast, brightness and sharpness to display
vivid images.

•  Standard : Displays images in standard levels of contrast,
brightness and sharpness.

•  Eco/APS : [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.

•  Cinema/Game : Displays the optimum picture for movie, game.

•  Soccer : [Depending on model] Optimised picture mode for

football matches. The pitch and kits are presented in vibrant
colours, with crystal-clear images even for fast movements.

•  Cricket : [Depending on model] Optimised picture mode for
Cricket matches. The pitch and kits are presented in vibrant colours,
with crystal-clear images even for fast movements.

17

ENGLISH

•  Expert 1, 2 : Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV viewing. This
is the adjustment menu provided for ISF-certied picture tuning
professionals. (ISF logo can only be used on ISF-certied TVs.)
ISFccc: Imaging Science Foundation Certied Calibration Control

•  Depending on input signal, available range of picture modes may
dier.

•  Expert mode is for picture tuning professionals to control
and ne-tune using a specic image. For normal images, the
eects may not be dramatic.

•  The ISF function is only available on some models.

To set advanced control

SETTINGS PICTURE Picture Mode Advanced Control /
Expert Control

Calibrates the screen for each picture mode; or adjusts picture settings
for a special screen. First select a Picture Mode of your choice.

•  Dynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.

•  Dynamic Colour : Adjusts colours to make the image appear in
more natural colours.

•  Skin Colour : Sets Skin colour spectrum separately to implement
the skin colour as dened by the user.

•  Sky Colour : Sky colour is set separately.

•  Grass Colour : Natural colour spectrum (meadows, hills, etc.) can

be separately set.

•  Gamma : Sets the gradation curve according to the output of
picture signal in relation to the input signal.

•  Colour Gamut : Selects the range of colours that can be
expressed.

•  Edge Enhancer : Shows clearer and distinctive yet natural edges
of the video.

•  Expert Pattern : [Depending on model]
Patterns used for expert adjustment.

•  Colour Filter : Filters a specic colour spectrum in RGB colours to
ne-tune colour saturation and hue accurately.

•  Colour Temperature : Adjusts the overall tone of the screen
as desired. In Expert mode, detailed ne-tuning can be set via
Gamma method, etc.

•  Colour Management System : This is a system that experts use
when they adjust colour with a test pattern. They can select from
six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow)
without aecting other colours. For normal images, adjustments
may not result in noticeable colour changes.

•  Super Resolution : [Depending on model]
Adjusts the resolution to make dim and blurred images clearer.

•  Depending on input signal or other picture settings, the range of
detailed items for adjustment may dier.

18

To set additional picture options

SETTINGS PICTURE Picture Mode Picture Option

[Depending on model]

Adjusts detailed setting for images.

•  Noise Reduction : Eliminates noise in the picture.

•  MPEG Noise Reduction : Eliminates noise generated while

creating digital picture signals.

•  Black Level : Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.

•  Real Cinema : Optimizes the screen for movie viewing.

•  Motion Eye Care / Smart Energy Saving : [Depending on

model] Saves power consumption by adjusting the brightness
corresponding to the movement of the image on the screen.

•  LED Local Dimming : [Depending on model] Brightens bright
areas and darkens dark areas of the image for maximum contrast
and minimum blur while reducing power consumption.

- Off : Disables the LED Local Dimming function.

- Low/Medium/High : Changes the contrast ratio.

•  TruMotion : [Depending on model] Optimizes the image quality
of fast-moving pictures.

- Off : Turns o the TruMotion.

- Smooth : Softens fast-moving pictures.

- Clear : Makes fast-moving pictures clearer.

- User : Sets De-Judder/De-Blur manually.

De-Judder: Adjusts juddering on the screen.

De-Blur: Reduces the blurring eects of motion.
Auto means Juddering and blurring range that depend on input
video status is controlled by TruMotion mode.

•  Depending on input signal or other picture settings, the range of
detailed items for adjustment may dier.

To use Energy Saving feature

SETTINGS PICTURE Energy Saving

Reduces power consumption by adjusting screen brightness.

•  Auto : [Depending on model]
The TV sensor detects the ambient lighting and automatically
adjusts the screen brightness.

•  Off : Turns o the Energy Saving mode.

•  Minimum / Medium / Maximum : Applies the pre-set Energy

Saving mode.

•  Screen Off : Screen is turned o and only sound is played. Press
any button except Power button on the remote control to turn the
screen back on.

To use HDMI ULTRA HD Deep Colour

SETTINGS PICTURE HDMI ULTRA HD Deep Colour HDMI
(1/2) ULTRA HD Deep Colour

[Depending on model]

HDMI port provides ULTRA HD Deep Colour, You can watch more clear
picture.

•  On : ULTRA HD Deep Colour support

•  Off : ULTRA HD Deep Colour not support

ENGLISH

To use TV speaker

SETTINGS AUDIO Sound Out TV Speaker / Internal TV
Speaker

[Depending on model]

Sound is output through the TV speaker.

To use External Speaker

SETTINGS AUDIO Sound Out External Speaker (Optical)
/ Audio Out (Optical)

[Depending on model]

Sound is output through the speaker connected to the optical port.

•  SimpLink is supported.

To use Internal TV Speaker + Audio Out (Optical)

SETTINGS AUDIO Sound Out Internal TV Speaker +
Audio Out (Optical)

[Depending on model]

Audio is played through the TV’s built-in speakers and the audio device
connected to the digital optical audio output port simultaneously.

To use Digital Sound Out

SETTINGS AUDIO Sound Out External Speaker (Optical)
/ Audio Out (Optical) / Internal TV Speaker + Audio Out (Optical)

Digital Sound Out

[Depending on model]

Sets up Digital Sound Out.

Item Audio Input Digital Audio Ouput

MPEG

Auto

PCM All PCM

Dolby Digital

Dolby Digital Plus

HE-AAC

DTS

PCM
Dolby Digital
Dolby Digital
Dolby Digital

DTS

To synchronize audio and video

SETTINGS AUDIO AV Sync. Adjust

[Depending on model]

Synchronizes video and audio directly when they do not match.

•  If you set AV Sync. Adjust to ON, you can adjust the sound output
(TV speakers or SPDIF) to the screen image.

To use SIMPLINK

[Depending on model]

SIMPLINK is a feature that enables you to control and manage various
multimedia devices conveniently via the SIMPLINK menu.

1 Connect the T V’s HDMI IN terminal and the SIMPLINK device’s HDMI

output terminal using an HDMI cable.

•  [Depending on model]
For home theatre units with a SIMPLINK function, connect HDMI
terminals as above, and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical Digital Audio In of the
SIMPLINK device.

2 Select INPUT(OPTION) SIMPLINK.

SIMPLINK menu window appears.

3 In SIMPLINK Setting window, set SIMPLINK function to ON.

4 In SIMPLINK menu window, selects the device you want to control.

•  This function is only compatible with devices with the SIMPLINK
logo.

•  To use the SIMPLINK function, you need to use a high-speed HDMI®
cable (with CEC (Consumer Electronics Control) feature added).
High-speed HDMI® cables have the No. 13 pin connected for
information exchange between devices.

•  If you switch to another input, the SIMPLINK device will stop.

•  If a third-party device with the HDMI-CEC function is also used, the

SIMPLINK device may not work normally.

•  [Depending on model]
If you select or play media from a the device with a home theatre
function, the HT Speaker(Speaker) is automatically connected.
Be sure to connect with an optical cable (sold separately) to use the
HT Speaker(Speaker) function.

To connect and use LG audio device

SETTINGS AUDIO Sound Out LG Sound Sync (Optical)

[Depending on model]

Connect LG audio device with the logo to the optical digital
audio output port. LG audio device allows you to enjoy rich powerful
sound easily.

To use Headphone

SETTINGS AUDIO Sound Out Headphone

[Depending on model]

Sound is output through the headphone connected to the earphone/
headphone port.

SIMPLINK function description

•  Direct Play : Plays the multimedia device on the TV instantly.

•  Select multimedia device : Selects the desired device via the

SIMPLINK menu to control it from the TV screen instantly.

•  Disc playback : Manages the multimedia device with the TV
remote control.

•  Power off all devices : When you power o the TV, all connected
devices are turned o.

•  Sync Power on : When the equipment with SIMPLINK function
connected HDMI terminal starts to play, the TV will automatically
turn on.

•  Speaker : [Depending on model]
Select speaker either on the home theatre unit or the TV.

19

ENGLISH

To set password

SETTINGS LOCK Set Password

Sets or changes the TV password.

The initial password is set to ‘0000’.

To return Factory Reset

SETTINGS OPTION Factory Reset

All stored information is deleted and TV settings are reset.

The TV turns itself o and back on, and all settings are reset.

•  When Lock System is in place, a pop-up window appears and asks
for password.

•  Do not turn o the power during initialization.

To remove the USB device

Q.MENU USB Device

Select a USB storage device that you want to remove.

When you see a message that the USB device has been removed,
separate the device from the TV.

•  Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.

Using a USB storage device - warning

•  If the USB storage device has a built-in auto recognition program or
uses its own driver, it may not work.

•  Some USB storage devices may not work or may work incorrectly.

•  Use only USB storage devices formatted with the Windows FAT32 or

NTFS File System.

•  For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less than
500 mA.

•  It is recommended that you use USB memory sticks of 32 GB or less
and USB HDDs of 2 TB or less.

•  If a USB HDD with power-saving function does not work properly,
turn the power o and on. For more information, refer to the user
manual of the USB HDD.

•  Data in the USB storage device can be damaged, so be sure to back
up important les to other devices. Data maintenance is the user’s
responsibility and the manufacturer is not responsible for data loss.

My Media supporting le

•  Maximum data transfer rate : 20 Mbps (Mega bit per second)

•  External supported subtitle formats : *.srt (SubRip), *.smi (SAMI),

*.sub (SubViewer, MicroDVD, DVDsubtitleSystem, SubIdx(Vobsub)),
*.ass/*.ssa (SubStation Alpha), *.txt (TMplayer), *.psb (PowerDivX)

•  Internal supported subtitle formats: *.dat/*.mpg/*.mpeg/*.
vob (DVD Subtitle), *.ts/*.tp/*.m2ts/ (DVB Subtitle), *.mp4 (DVD
Subtitle, UTF-8 Plain Text), *.mkv (ASS, SSA, UTF-8 Plain Text,
Universal Subtitle Format, VobSub, DVD Subtitle), *.divx/*.avi
(XSUB1, XSUB+)

1 XSUB : Supports internal subtitles generated from DivX6

Supported Video Formats

•  Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640 x 480 @ 30p)

•  .asf, .wmv

[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC, VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3, MP3, 3D WMV
Single Stream

•  .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I, MPEG-1 Layer II,
Dolby Digital, MPEG-1 Layer III (MP3), *DTS

•  .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC, *DTS

•  .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II, DVD-LPCM

•  .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3), *DTS

•  .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XVID, H.264/AVC

[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), *DTS, LPCM

•  motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM

•  .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM

•  dat
[Video] MPEG-1, MPEG-2
[Audio] MP2

•  v
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC

•  *rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC, RA6(Cook)

•  3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)

•  *DTS / *rm / *rmvb : Depending on model

20

ENGLISH

Supported Audio Formats

•  File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3

•  File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS

•  File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4

•  File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard

•  File Type : WMA 10 Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro

•  File Type : OGG
[Bit rate] Free Format
[Sample freq.] ~ 48 kHz
[Support] OGG Vorvis

Supported Photo Formats

•  Category : 2D (jpeg, jpg, jpe), 3D (jps)
[Available le type] SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size] Minimum : 64 x 64,
Maximum : Normal Type: 15360 ( W) x 8640 (H),
Progressive Type : 1920 (W) x 1440 (H)

•  Category : BMP
[Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400

•  Category : PNG
[Available le type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum : Interlace : 1200 x 800,
Non-Interlace : 9600 x 6400

•  Category : MPO (3D)
[Photo size] 4:3 Size : 3648 x 2736 / 2592 x 1944 / 2048 x 1536,
3:2 Size : 3648 x 2432

•  BMP and PNG format les may be slower to display than JPEG.

•  The 3D function may dier depending on the model.

To see web manual

To obtain detailed User Guide information, please visit www.lg.com.

External control device
setup

To obtain the external control device setup information, please visit
www.lg.com.

Troubleshooting

Cannot control the TV with the remote control.

•  Check the remote control sensor on the product and try again.

•  Check if there is any obstacle between the product and the remote

control.

•  Check if the batteries are still working and properly installed (
to , to ).

No image display and no sound is produced.

•  Check if the product is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

•  Check the power control settings. The power supply may be
interrupted.

•  Check if the Automatic Standby(Depending on model) / Sleep
Timer / Off Time is activated in the TIME settings.

•  If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ is
displayed.

•  Turn the TV o/on using the remote control.

•  Reconnect the HDMI cable.

•  Restart the PC with the TV on.

21

ENGLISH

Specications

AC/DC Adapter

Operating Temperature 0 °C to 40 °C

Environment

condition

Operating Humidity Less than 80 %

Storage Temperature -20 °C to 60 °C

Storage Humidity Less than 85 %

32LF51** 43/49LF51**

Manufacturer : Honor

Model : ADS-45EI-19 19040GPI,

ADS-45FSN-19 19040GPG,

ADS-45FSN-19 19040GPCU,

ADS-40LSI-19-2 19040G,

ADS-45SN-19-2 19040G

Manufacturer : APD

Model : WA-40D19FI

Manufacturer : Lien Chang

Model : LCAP16B-E, LCAP16B-A,

LCAP25B

In : AC 100 - 240 V ~ 50/60 Hz

Out : DC 19 V 2.1 A

Manufacturer : Lien Chang

Model : LCAP40

Manufacturer : APD

Model : DA-65F19

In : AC 100 - 240 V ~ 50/60 Hz

Out : DC 19 V 3.42 A

Satellite Digital TV

(Depending on Model)

Television system DVB-S/S2

Programme coverage

Maximum number of
storable programmes

External antenna impedance 75 Ω

* Only DVB-T2 support models.

VHF, UHF

C-Band, Ku-Band

6,000 1,500

(Depending on Country & Model)

22

Digital TV

DVB-T

DVB-T/T2*

VHF, UHF VHF, UHF, CATV

Analogue TV

(Depending on Country)

PAL B/B, PAL B/G, PAL D/K, PAL-I,

SECAM B/G, SECAM D/K

NTSC-M

ENGLISH

3D supported mode

(Only 3D models)

Video, which is input as below media contents is switched into the 3D screen automatically.

The method for 3D digital broadcast may dier depending on the signal environment. If video is not switched automatically into 3D, manually
convert the settings to view 3D images.

Input Signal Resolution

720p 1280 x 720

HDMI

DTV

USB 1080p 1920 x 1080 33.75 30.000 Side by Side, Top and Bottom, JPS, MPO(Photo)

1080i 1920 x 1080

1080p 1920 x 1080

720p 1280 x 720 37.500 50

1080i 1920 x 1080 28.125 50

Horizontal

Frequency (kHz)

37.5 50

45 60

75 50

89.9 / 90 59.94 / 60

28.125 50

33.7 60

27 24

33.7 30

53.95 / 54 23.98 / 24 Frame packing

56.3 50

67.5 60

Vertical

Frequency (Hz)

Playable 3D video format

Side by Side(half), Top and Bottom

Frame packing

Side by Side(half), Top and Bottom

Side by Side(half), Top and Bottom

Side by Side(half), Top and Bottom,

Single frame sequential

Side by Side, Top and Bottom

23

ENGLISH

HDMI-DTV supported mode

Resolution

640 x 480

720 x 480

720 x 576 31.25 50.00

1280 x 720 37.50 50.00

1

1280 x 720 45.00 60.00

1280 x 720 44.96 59.94

1920 x 1080

2

3840 x 2160

4096 x 2160

1

: Support dual play for 3D models

2

: Only UF67**

Horizontal

Frequency (kHz)

31.46

31.50

31.47

31.50

28.12

33.75

33.72

56.25

67.50

67.43

27.00

26.97

33.75

33.71

53.95
54

56.25

61.43

67.5

112.5

135
135

53.95
54

56.25

61.43

67.5

112.5

135
135

Vertical

Frequency

(Hz)

59.94

60.00

59.94

60.00

50.00

60.00

59.94

50.00

60.00

59.94

24.00

23.97

30.00

29.97

23.98

24.00

25.00

29.97

30.00

50.00

59.94

60.00

23.98

24.00

25.00

29.97

30.00

50.00

59.94

60.00

HDMI-PC supported mode

Use HDMI IN 1 for PC mode (Except for UF67**)

Resolution

Horizontal

Frequency (kHz)

Vertical

Frequency (Hz)

640 x 350 31.46 70.09

720 x 400 31.46 70.08

640 x 480 31.46 59.94

800 x 600 37.87 60.31

1024 x 768 48.36 60.00

1152 x 864 54.34 60.05

1360 x 768 47.71 60.01

1

1280 x 1024 63.98 60.02

1920 x 1080 67.50 60.00

2

3840 x 2160

4096 x 2160

1

: Except for 32LF55*U, 32LF55*B, 32LF55*D, 32LF55*Z, 32LF55*R,

54

56.25

67.5

53.95
54

24.00

25.00

30.00

23.97
24

32LF56*U, 32LF56*B, 32LF56*D, 32LF56*Z, 32LF62*U, 32LF62*B,
32LF62*D, 32LF62*Z, 32LF51*D, 32LF51*B, 32LF51*Z

2

: Only UF67**

Component port connecting
information

Component ports on the TV Y P

Video output ports on

DVD player

Signal Component

480i / 576i O

480p / 576p O

720p / 1080i O

1080p

(Only 50 Hz / 60 Hz)

B

Y P

B

Y B -Y R-Y

Y Cb Cr

Y Pb Pr

O

P

R

P

R

24

ENGLISH

Environmental Information

(India region only)

Disposal of your old appliance (as per e-waste Rules)

1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is
covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished or
disposed o.

2. Dos

a. The product is required to be handed over only to the authorized recycler for disposal.

b. Keep the product in isolated area, after it becomes non-functional/un-repairable so as to prevent its accidental breakage.

Don’t

a. The product should not be opened by the user himself/herself, but only by authorized service personnel.

b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.

c. The product is not meant for mixing into household waste stream.

d. Do not keep any replaced spare part(s) from the product in exposed area.

3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.

4. Hazards of improper handling or accidental breakage:

a. All picture tubes are hazardous due to concentration of lead, cadmium and zinc in it. The various chemicals and heavy metals contained in
picture tubes cause cancer, birth defects, hormone disruption, and damage body organs when they leak into the environment. All of this can, and
does, leach into the soil, ground water, air and our own bodies.
To prevent possible injury in case of breakage, wear heavy protective clothing, including gloves & safety goggles.

b. If batteries are disposed incorrectly, it can greatly harm the environment. The chemical by-products are hazardous. The metals and chemicals
found in batteries can mix into soil which may be hazardous to humans, plants and animals. If thrown in re, they can cause blast and release toxic
gases which may be harmful for health.

5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-180-9999
for details. All collection centre and pick up facilities are done by third parties whith LG Electronics India Pvt. Ltd. merely as a facilitator. For more
detailed information, please visit : http://www.lge.com/in

25

Record the model number and serial number
of the TV.
Refer to the label on the back cover and
quote this information to your dealer when
requiring any service.

MODEL

SERIAL

(Only DTV)

OWNER’S MANUAL

EXTERNAL CONTROL
DEVICE SETUP

Please read this manual carefully before operating the set and retain it for
future reference.

www.lg.com

ENG

ENGLISH

KEY CODES

2

2

KEY CODES

• This feature is not available for all models.

Code

(Hexa)

00 CH +, PR + R/C Button 53 List R/C Button

01 CH -, PR - R/C Button 5B Exit R/C Button

02 Volume + R/C Button 60 PIP(AD) R/C Button

03 Volume - R/C Button 61 Blue R/C Button

06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button

07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button

08 Power R/C Button 72 Red R/C Button

09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button

0B Input R/C Button 91 AD (Audio Description) R/C Button

0E SLEEP R/C Button 7A User Guide R/C Button

Function Note

Code

(Hexa)

Function Note

0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button

10 - 19 * Number Key 0 - 9 R/C Button 7E SIMPLINK R/C Button

1A Q.View / Flashback R/C Button 8E ►►(Forward) R/C Button

1E FAV (Favorite Channel) R/C Button 8F ◄◄(Rewind) R/C Button

20 Text (Teletext) R/C Button AA Info R/C Button

21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button

28 Return (BACK) R/C Button B0 ►(Play) R/C Button

30 AV (Audio / Video) Mode R/C Button B1 ꕗ (Stop / File List) R/C Button

39 Caption/Subtitle R/C Button BA

40 Λ

41

42 My Apps R/C Button DC 3D R/C Button

43 Menu / Settings R/C Button 99 AutoConfig R/C Button

44 OK / Enter R/C Button 9F App / * R/C Button

45 Q.Menu R/C Button 9B TV/PC R/C Button

4C List, - (ATSC Only) R/C Button

(Arrow Key / Cursor Up)

V (Arrow Key / Cursor

Down)

R/C Button BB Soccer R/C Button

R/C Button BD ꔄ (REC) R/C Button

ꕘ (Freeze / Slow Play /

Pause)

R/C Button

* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.

(For South Korea, Japan, North America, Latin America except Colombia models)

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

(PC

USB IN

(TV)

(PC

(PC)

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the product’s functions externally.

Note: The type of control port on the TV can be different between model series.

* Please be advised that not all models support this type of connectivity.

* Cable is not provided.

USB to Serial converter with USB Cable

USB Type

3

3

)

• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter

which is not made nor provided by LG.

• It can be purchased from computer stores that carry accessories for IT support professionals.

USB IN

(TV)

RS-232C With RS232C Cable

DE9 (D-Sub 9pin) Type

• You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required

for the connection between the PC and the TV, which is specified in the manual.

RS-232C IN

(CONTROL & SERVICE)

)

The connection interface may differ from your TV.

(TV)

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

USB IN

(TV)

(PC)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(PC

USB IN

(TV)

(PC)

(PC)

RS-232C IN

(CONTROL & SERVICE)

(TV)

(TV)

(PC)

(PC

SERVICE ONLY

1

3

2

4

4

Phone jack Type

• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and

the TV, which is specified in the manual.

* For other models, connect to the USB port.

* The connection interface may differ from your TV.

1

3

(TV)

(TV)

- or

)

2

1

3

SERVICE ONLY

)

RS-232C IN

2

(CONTROL & SERVICE)

Customer Computer RS-232C configurations

3-Wire Configurations(Not standard)

1

6

RS-232C

(Serial port)

5

RXD 2 2 TXD

TXD 3 1 RXD

GND 5 3 GND

9

RXD 3 2 TXD

TXD 2 1 RXD

GND 5 3 GND

PC TV

OR

D-Sub 9 Phone

Set ID

For Set ID number, see "Real Data Mapping" on p.6

1. Press SETTINGS to access the main menus.

2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.

3. Press the Navigation buttons to scroll to SET ID and press OK.

4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.

5. When you are finished, press EXIT.

* (Depending on model)

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

Communication Parameters

5

5

• Baud rate : 9600 bps (UART)

• Data length : 8 bits

• Parity : None

• Stop bit : 1 bit

• Communication code : ASCII code

• Use a crossed (reverse) cable.

Command reference list

(Depending on model)

COMMAND1 COMMAND2

01. Power* k a 00 to 01 15. Balance k t 00 to 64

02. Aspect
Ratio

03. Screen
Mute

04. Volume
Mute

05. Volume
Control

06. Contrast k g 00 to 64

07.
Brightness

08. Color/
Colour

09. Tint k j 00 to 64

10.
Sharpness

11. OSD
Select

12. Remote
Control Lock
Mode

13. Treble k r 00 to 64

k c (p.7)

k d (p.7)

k e 00 to 01 18. Equalizer j v (p.8)

k f 00 to 64

k h 00 to 64

k i 00 to 64 22. Key m c Key Codes

k k 00 to 32

k l 00 to 01

k m 00 to 01

DATA

(Hexadecimal)

16. Color
(Colour)
Temperature

17. ISM
Method (Only
Plasma TV)

19. Energy
Saving

20. Tune
Command

21. Channel
(Programme)
Add/Del(Skip)

23. Control
Backlight,
Control Panel
Light

24. Input
select (Main)

25. 3D (Only
3D models)

26. Extended
3D (Only 3D
models)

27. Auto
Configure

COMMAND1 COMMAND2

x u 00 to 64

j p (p.8)

j q 00 to 05

m a (p.9)

m b 00 to 01

m g 00 to 64

x b (p.11)

x t (p.11)

x v (p.11)

j u (p.12)

DATA

(Hexadecimal)

14. Bass k s 00 to 64

* Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not

executed and treated as NG.
With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with
USB-to-Serial converter cable, the command works only if TV is on.

6

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

6

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.

Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set
can be controlled.

* [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on

transmission/receiving protocol.
[DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return - ASCII code ‘0x0D’
[ ] : Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,

if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x]

* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from

non-viable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

* When you enter the [data] in hexadecimal, refer to following conversion table.

* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254
01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255

... ... ...

0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256

... ... ...

0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999

... ... ...

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

* Commands may work differently depending on model and signal.

7

7

01. Power (Command: k a)

► To control Power *On or Off of the set.

Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off 01 : *Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

► To Show TV is Power On or *Off

Transmission [k][a][ ][Set ID][ ][FF][Cr]

Ack [a][ ][Set ID][ ][OK][Data][x]

* Similarly, if other functions transmit ‘FF’ data

based on this format, Acknowledgement feedback
presents status about each function.

02. Aspect Ratio (Command: k c)
(Main Picture Size)

► To adjust the screen format. (Main picture format)

You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen

(4:3)

02 : Wide screen

(16:9)
04 : Zoom
05 : Zoom 2
(Latin America

except Colombia
Only)

06 : Set by Program/

Original

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

07 : 14:9
(Europe, Colombia, Mid-East,
Asia except South Korea and
Japan)
09 : * Just Scan
0B : Full Wide
(Europe, Colombia, Mid­East, Asia except South
Korea and Japan)
10 to 1F : Cinema Zoom 1

to 16

* Using the PC input, you select either 16:9 or 4:3

screen aspect ratio.

* In DTV/HDMI/Component mode (high-definition),

Just Scan is available.

* Full wide mode may work differently based on

model and is supported for DTV fully, and ATV,
AV partially.

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

* In case of video mute on only, TV will display On

Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.

04. Volume Mute (Command: k e)

► To control volume mute on/off.

You can also adjust mute using the MUTE button
on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)

Ack [e][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)

► To adjust volume.

You can also adjust volume with the volume
buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

► To adjust screen contrast.

You can also adjust contrast in the PICTURE
menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

► To adjust screen brightness.

You can also adjust brightness in the PICTURE
menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

03. Screen Mute (Command: k d)

► To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on)

Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on

Data Min : 00 to Max : 64

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Color/Colour (Command: k i)

► To adjust the screen Color(Colour).

You can also adjust colour in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

8

8

Data Min : 00 to Max : 64

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

09. Tint (Command: k j)

► To adjust the screen tint.

You can also adjust tint in the PICTURE menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64

Ack [j][ ][Set ID][ ][OK/NG][Data][x]

* (Depending on model)

14. Bass (Command: k s)

► To adjust Bass.

You can also adjust in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [s][ ][Set ID][ ][OK/NG][Data][x]

* (Depending on model)

10. Sharpness (Command: k k)

► To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE
menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 32

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

► To select OSD (On Screen Display) on/off when

controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00 : OSD off 01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

► To lock the front panel controls on the monitor and

remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

15. Balance (Command: k t)

► To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [t][ ][Set ID][ ][OK/NG][Data][x]

16. Color(Colour) Temperature (Command: x u)

► To adjust colour temperature. You can also adjust

Color(Colour) Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [u][ ][Set ID][ ][OK/NG][Data][x]

17. ISM Method (Command: j p) (Only Plasma TV)

► To control the ISM method. You can also adjust

ISM Method in OPTION menu.

Transmission [j][p][ ][Set ID][ ][Data][Cr]

Data Min : 02: Orbiter

08: Normal
20: Color(Colour) Wash

Ack [p][ ][Set ID][ ][OK/NG][Data][x]

* If you are not using the remote control, use this

mode.
When main power is off & on (plug-off and plug-in,
after 20 - 30 seconds), external control lock is
released.

* In the standby mode (DC off by off timer or ‘ka’,

‘mc’ command), and if key lock is on, TV will not
turn on by power on key of IR & Local Key.

13. Treble (Command: k r)

► To adjust treble.

You can also adjust in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [r][ ][Set ID][ ][OK/NG][Data][x]

18. Equalizer (Command : j v)

► Adjust EQ of the set.

Transmission [j][v][ ][Set ID][ ][Data][Cr]

MSB

0 0 0 0 0 0 0 0

Frequency Data

7 6 5

0 0 0

0 0 1

0 1 0

0 1 1

Frequency

1st Band

2nd Band

3rd Band

4th Band

4 3 2 1 0 Step

0 0 0 0 0

0 0 0 0 1

... ... ... ... ...

1 0 0 1 1

LSB

0(decimal)

1(decimal)

...

19(decimal)

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

1 0 0

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]

* It depends on model, and can adjust when sound
mode is EQ adjustable value.

5th Band

1 0 1 0 0

20(decimal)

19. Energy Saving (Command: j q)

► To reduce the power consumption of the TV. You

can also adjust Energy Saving in PICTURE menu.

Transmission [j][q][ ][Set ID][ ][Data][Cr]

Data
00 : Off
01 : Minimum
02 : Medium
03 : Maximum
04 : Auto (For LCD TV / LED TV) /

Intelligent sensor (For PDP TV)

05 : Screen off

* (Depending on model)

Ack [q][ ][Set ID][ ][OK/NG][Data][x]

20. Tune Command (Command: m a)

* This command may work differently depending on

model and signal.

• For Europe, Mid-East, Colombia, Asia except

South Korea and Japan Model

► Select channel to following physical number.

Transmission [m][a][ ][Set ID][ ][Data 00][ ]

[Data 01][ ][Data 02][Cr]

* Analog Antenna/Cable

[Data 00][Data 01] Channel Data
Data 00 : High byte channel data
Data 01 : Low byte channel data

- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)

Data 02 : Input Source (Analog)

- 00 : Antenna TV (ATV)

- 80 : Cable TV (CATV)

* Digital Antenna/Cable/Satellite

[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data

- 00 00 ~ 27 0F (Decimal: 0 ~ 9999)

Data 02 : Input Source (Digital)

- 10 : Antenna TV (DTV)

- 20 : Antenna Radio (Radio)

- 40 : Satellite TV (SDTV)

- 50 : Satellite Radio (S-Radio)

- 90 : Cable TV (CADTV)

- a0 : Cable Radio (CA-Radio)

* Tune Command Examples:

1. Tune to the Analog antenna (PAL) Channel 10.

Set ID = All = 00
Data 00 & 01 = Channel Data is 10 = 00 0a
Data 02 = Analog Antenna TV = 00
Result = ma 00 00 0a 00

2. Tune to the digital antenna (DVB-T) Channel 01.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1 = 00 01
Data 02 = Digital Antenna TV = 10
Result = ma 00 00 01 10

3. Tune to the satellite (DVB-S) Channel 1000.
Set ID = All = 00
Data 00 & 01 = Channel Data is 1000 = 03 E8
Data 02 = Digital Satellite TV = 40
Result = ma 00 03 E8 40

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]

• For South Korea, North/Latin America except

Colombia Model

► To tune channel to following physical/major/minor

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

Digital channels have a Physical, Major, and Minor
channel number. The Physical number is the actual
digital channel number, the Major is the number that
the channel should be mapped to, and the Minor is
the sub-channel. Since the ATSC tuner automatically
maps the channel from the Major / Minor number,
the Physical number is not required when sending a
command in Digital.

* Analog Antenna/Cable

Data 00 : Physical Channel Number

- Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)

- Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)

[Data 01 ~ 04]: Major/Minor Channel Number
Data 01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
Data 05: Input Source (Analog)

- 00 : Antenna TV (ATV)

- 01 : Cable TV (CATV)

* Digital Antenna/Cable

Data 00 : xx (Don't care)

[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor Channel Number
Data 03 : High byte Channel Data
Data 04 : Low byte Channel Data

Data 05 : Input Source (Digital)

- 02 : Antenna TV (DTV) – Use Physical Channel

Number

- 06 : Cable TV (CADTV) – Use Physical Channel

9

9

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

10

10

Number

- 22 : Antenna TV (DTV) – Don’t Use Physical
Channel Number

- 26 : Cable TV (CADTV) - Don’t Use Physical
Channel Number

- 46 : Cable TV (CADTV) – Use Major Channel
Number Only (One Part Channel)

Two bytes are available for each major and minor
channel data, but usually the low byte is used alone
(high byte is 0).

* Tune Command Examples:

1. Tune to the Analog cable (NTSC) channel 35.

Set ID = All = 00
Data 00 = Channel Data is 35 = 23
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = Analog Cable TV = 01
Total = ma 00 23 00 00 00 00 01

2. Tune to the digital antenna (ATSC) channel 30-3.

Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Data 05 = Digital Antenna TV = 22
Total = ma 00 00 00 1E 00 03 22

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][Data 03][Data 04][Data 05]

[x][a][ ][Set ID][ ][NG][Data 00][x]

• For Japan Model

► To tune channel to following physical/major/minor

number.

Transmission [m][a][ ][0][ ][Data00][ ][Data01]

[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]

* Digital Antenna/Satellite
Data 00: xx (Don't care)

[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data

- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)

[Data 03][Data 04]: Minor/Branch Channel Number

(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data

Data 05 : Input Source (Digital/Satellite for Japan)

- 02 : Antenna TV (DTV)

- 07 : BS (Broadcasting Satellite)

- 08 : CS1 (Communication Satellite 1)

- 09 : CS2 (Communication Satellite 2)

* Tune Command Examples:
1

Tune to the digital antenna (ISDB-T) channel 17-1
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 17 = 00 11
Data 03 & 04 = Minor/Branch is 1 = 00 01

Data 05 = Digital Antenna TV = 02
Total = ma 00 00 00 11 00 01 02

2. Tune to the BS (ISDB-BS) channel 30.
Set ID = All = 00
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Don’t Care = 00 00
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07

* This feature is varied based on the model.

Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]

[Data 02][Data 03][Data 04][Data 05]

[x][a][ ][Set ID][ ][NG][Data 00][x]

21. Channel(Programme) Add/Del(Skip)

(Command: m b)

► To skip current channel(programme) for next time.

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* Set the saved channel status to del(ATSC, ISDB)/

skip(DVB) or add.

22. Key (Command: m c)

► To send IR remote key code.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

Data Key code - p.2.

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

23. Control Backlight (Command: m g)

• For LCD TV / LED TV

► To control the backlight.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

Control Panel Light (Command: m g)

• For Plasma TV

► To control the panel light.

Transmission [m][g][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

.

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

ENGENGLISH

EXTERNAL CONTROL DEVICE SETUP

24. Input select (Command: x b)
(Main Picture Input)

► To select input source for main picture.

Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data
00 : DTV
02 : Satellite DTV

ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV

20 : AV or AV1 21 : AV2

40 : Component1
60 : RGB

90 : HDMI1
92 : HDMI3

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

* This function depends on model and signal.

01 : CADTV
10 : ATV

41 : Component2

91 : HDMI2
93 : HDMI4

25. 3D(Command: x t) (only 3D models)

(Depending on model)

► To change 3D mode for TV.

Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]

[ ][Data 02][ ][Data 03][Cr]

* (Depending on model)

Data Structure
[Data 00] 00 : 3D On

01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D

[Data 01] 00 : Top and Bottom

01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving

[Data 02] 00 : Right to Left

01 : Left to Right

[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14

(*transmit by Hexadecimal code)

* [Data 02], [Data 03] functions depend on model

and signal.

* If [Data 00] is 00 (3D On), [Data 03] has no

meaning.

* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data

01], [Data 02] and [Data 03] have no meaning.

* If [Data 00] is 03 (2D to 3D), [Data 01] and

[Data 02] have no meaning.

* If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data

03] works when 3D Mode (Genre) is manual only.

* All 3D pattern options ([Data 01]) may not be

available according to broadcasting/video signal.

[Data 00] [Data 01] [Data 02] [Data 03]

00 O O O

01 X X X

02 X X X

03 X O O

X : don’t care

Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]

[Data03][x]

[t][ ][Set ID][ ][NG][Data00][x]

26. Extended 3D(Command: x v) (only 3D models)
(Depending on model)

► To change 3D option for TV.

Transmission [x][v][ ][Set ID][ ][Data 00][ ]

[Data 01][Cr]

[Data 00] 3D option

00 : 3D Picture Correction
01 : 3D Depth (3D Mode is Manual Only)
02 : 3D Viewpoint
06 : 3D Color Correction
07 : 3D Sound Zooming
08 : Normal Image View
09 : 3D Mode (Genre)

[Data 01] It has own range for each 3D option

determined by [Data 00].

1) When [Data 00] is 00

00 : Right to Left
01 : Left to Right

2) When [Data 00] is 01, 02

Data Min: 0 - Max: 14 (*transmit by Hexadecimal

code)
Data value range(0 - 20) converts Viewpoint range
(-10 - +10) automatically (Depending on model)
* This option works when 3D Mode (Genre) is manual

only.

3) When [Data 00] is 06, 07

00 : Off

01 : On

4) When [Data 00] is 08

00 : Revert to 3D video from 3D-to-2D

converted 2D video

01 : Change 3D video to 2D video, except

2D-to-3D video

* If conversion condition doesn’t meet, command is

treated as NG.

5) When [Data 00] is 09

00 : Standard
02 : Cinema
04 : Manual

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]

[v][ ][Set ID][ ][NG][Data00][x]

01 : Sport
03 : Extreme
05 : Auto

11

11

ENG

ENGLISH

EXTERNAL CONTROL DEVICE SETUP

12

12

27. Auto Configure (Command: j u)
(Depending on model)

► To adjust picture position and minimize image

shaking automatically. It works only in RGB (PC)
mode.

Transmission [j][u][ ][Set ID][ ][Data][Cr]

Data 01 : Run Auto Configure

Ack [u][ ][Set ID][ ][OK/NG][Data][x]