LG 47LD650H, 32LD655H, 32LD650H, 42LD655H, 32LG710H User Manual

OWNER’S MANUAL

LCD TV

Please read this manual carefully before operating
your set and retain it for future reference.

32LG710H
37LG710H
42LG710H

P/NO : SAC34134301 (1007-REV02)

32LD650H
37LD650H
42LD650H
47LD650H
55LD650H

32LD655H
37LD655H
42LD655H

www.lg.com

2

WARNING / CAUTION

WARNING / CAUTION

To prevent fire or shock hazards, do not expose
this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two condi­tions: (1) This device may not cause (harmful)
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation (of the device).

Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user’s
authority to operate this product

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the presence
of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building, as close to the point of the cable entry
as practical.

3

SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radia­tors, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat.

Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong, The
wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your out­let, consult an electrician for replacement of the
obsolete outlet.

Protect the power cord from being walked on or
pinched particularly at plugs, convenience recepta­cles, and the point where they exit from the appara­tus.

Only use attachments/accessories specified by the
manufacturer.

Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the appa­ratus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.

Unplug this apparatus during lighting storms or
when unused for long periods of time.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

Never touch this apparatus or antenna during a
thunder or lighting storm.

When mounting a TV on the wall, make sure not to
install the TV by the hanging power and signal cables
on the back of the TV.

Do not allow an impact shock or any objects to fall
into the product, and do not drop onto the screen
with something.

IMPORTANT SAFETY INSTRUCTIONS

1

2

3

4

5

7

8

9

10

11

12

13

6

4

CAUTION concerning the Power Cord :
It is recommend that appliances be placed upon a
dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional
outlets or branch circuits. Check the specification
page of this owner's manual to be certain.
Do not connect too many appliances to the same
AC power outlet as this could result in fire or elec­tric shock.
Do not overload wall outlets. Overloaded wall out­lets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its
appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power
cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits the
appliance.
Do not make the TV with the power cord plugged
in. Do not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug the
TV.

WARNING - To reduce the risk of fire or electrical
shock, do not expose this product to rain, moisture
or other liquids. Do not touch the TV with wet
hands. Do not install this product near flammable
objects such as gasoline or candles or expose the
TV to direct air conditioning.

As long as this unit is connected to the AC wall out­let, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.

Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).

GGRROOUUNNDDIINNGG
Ensure that you connect the earth ground wire to

prevent possible electric shock. (i.e. a TV with a
three-prong grounded AC plug must be connected
to a three-prong grouned AC outlet) If grounding
methods are not possible, have a qualified electri­cian install a separate circuit breaker.

Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS
Mains plug is the disconnecting device. The plug

must remain readily operable.

DDoott DDeeffeecctt
The Plasma or LCD panel is a high technology

product with resolution of two million to six million
pixels. In a very few cases, you could see fine dots
on the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.

GGeenneerraatteedd SSoouunndd
“Cracking” noise: A cracking noise that occurs

when watching or turning off the TV is generated
by plastic thermal contraction due to tempera­ture and humidity. This noise is common for prod­ucts where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low
level noise is generated from a high-speed switch­ing circuit, which supplies a large amount of cur­rent to operate a product. It varies depending
on the product.

This generated sound does not affect the per­formance and reliability of the product.

Owner Manual

14

17

18

19

Power
Supply

Short-circuit

Breaker

20

15

16

21

5

AANNTTEENNNNAASS
OOuuttddoooorr aanntteennnnaa ggrroouunnddiinngg

If an outdoor antenna is installed, follow the precau­tions below. An outdoor antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
come in contact with such power lines or circuits as
death or serious injury can occur.

Be sure the antenna system is grounded so as to pro­vide some protection against voltage surges and
built-up static charges.

Section 810 of the National Electrical Code (NEC) in
the U.S.A. provides information with respect to prop­er grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna dis­charge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding
electrodes and requirements for the grounding elec­trode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee
NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700

Cleaning
When cleaning, unplug the power cord and scrub

gently with a soft cloth to prevent scratching. Do not
spray water or other liquids directly on the TV as
electric shock may occur. Do not clean with chemi­cals such as alcohol, thinners or benzene.

Moving
Make sure the product is turned off, unplugged

and all cables have been removed. It may take 2 or
more people to carry larger TVs. Do not press
against or put stress on the front panel of the TV.

Ventilation
Install your TV where there is proper ventilation. Do

not install in a confined space such as a bookcase.
Do not cover the product with cloth or other mate­rials (e.g.) plastic while plugged in. Do not install in
excessively dusty places.

Take care not to touch the ventilation openings.
When watching the TV for a long period, the venti­lation openings may become hot.

If you smell smoke or other odors coming from the
TV, unplug the power cord contact and authorized
service center.

Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil or pen, or make a
scratch on it.

Keep the product away from direct sunlight.

FF oo rr LLCCDD TTVV

If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.

Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary dis­tortion effects on the screen.

24

22

Antenna Lead in Wire

Antenna Discharge Unit
(NEC Section 810-20)

Grounding Conductor
(NEC Section 810-21)

Ground Clamps

Power Service Grounding
Electrode System (NEC
Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

25

26

27

28

23

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains
a small amount of mercury. Do not dispose of
this product with general household waste.
Disposal of this product must be carried out in
accordance to the regulations of your local authority.

29

30

6

CONTENTS

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . .

3

FEATURES OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Stand Instuctions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Cable Management

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Attaching the TV to a desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Securing the TV to the wall to prevent falling
When the TV is used on a stand

. . . . . . . . . . . . . . . . . . . . . . . . . . 23

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . .

24

MPI Card Slot / PPV Card Installation

. . . . . . . . . . . . . . 25

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Audio Out Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

WATCHING TV / CHANNEL CONTROL

Remote Control Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38

Turning On The TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

Volume Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . .

42

- Add / Delete Channel (Manual Tuning)

. . . . . .

43

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Channel Label

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

45

Example Electronic Program Guide

. . . . . . . . . . . . . . . . . . .

46

USB

Entry Modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Extra Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

PICTURE CONTROL

PIP (Picture-In-Picture)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . .

58

Preset Picture Settings (Picture Mode)

. . . . . . . . . . . . .

61

Manual Picture Adjustment - User Mode

. . . . . . . . . . 62

Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . . . 63

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Demo mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume)

. . . . . . . . . . . . . . . . . 67

Preset Sound Settings (Sound Mode)

. . . . . . . . . . . . . . 68

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

69

- SRS TruSurround XT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

70

- Infinite Sound

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Clear Voice ll

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

73

Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Stereo/SAP Broadcast Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . .

75

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

On-Screen Menus Language Selection

. . . . . . . . . . . . . . 77

Caption Mode

- Analog Broadcasting System Captions

. . . . . . .

78

- Digital Broadcasting System Captions

. . . . . . . .

79

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

80

7

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

81

- Manual Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Auto On/Off Time Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

83

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . .

85

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Downloadable Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

94

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

COMMERCIAL MODE SETUP

Interactive TV Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Installer Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

97

Interactive TV Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Commercial Mode Setup for Master TV

. . . . . . . . . . .

99

Master TV Profile Setup Learning/Teaching with
USB Memory Card

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 0

TLL-1100A Cloning Connections/Learning Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 2
LT2002 Cloning Connections/Learning Setup 103
LT2002 Cloning Learning Setup

. . . . . . . . . . . . . . . . . . . . . 10 4

Cloning Connections/Teaching Setup

. . . . . . . . . . . . . 10 5

Installer Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6

Reference: Detailed Instructions For Making A
Master TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Reference: Procedures for adding Channel Label
Icons/Custom Channel Labels (2-5-4 + MENU
Mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

113

Reference: Clonable Menu Features

. . . . . . . . . . . . . . . . .

114

Reference: Power Saving Setup

. . . . . . . . . . . . . . . . . . . . . . . .

115

TV Camport Auto Sense Operation

. . . . . . . . . . . . . . . .

117

FTG Operation Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

FTG Channel Map Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . .

119

FTG Installer Menu Overview

. . . . . . . . . . . . . . . . . . . . . . . . .

12 0
FTG Operation Troubleshooting

. . . . . . . . . . . . . . . . . . . .121

TV Aux Input Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

121

B-LAN Setup and Overview

. . . . . . . . . . . . . . . . . . . . . . . . . . .

12 2

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 3

Reference: LT2002 Cloning Procedure
Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 5

Troubleshooting Flow Chart

. . . . . . . . . . . . . . . . . . . . . . . . . . .

12 6

Commercial Mode Check

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Reference: RJP model list and input hierarchy

. .

12 7

Glossary of Terms

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 9

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 0

Programming the Remote Control

. . . . . . . . . . . . . . . . . . . 132

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 5

Open Source License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 7

8

FEATURES OF THIS TV

■

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV

for an extended period, it can become permanently imprinted on the screen. This phenomenon is known
as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

■

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period

(2 or more hours for LCD, 1 or more hours for Plasma).

■

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect
ratio setting for an extended period.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN
/ BURN-IN” ON YOUR TV SCREEN

Automatically enhances and amplifies the sound of
human voice frequency range to help keep dialogue
audible when background noise swells.

LG TV include a unique invisible speaker system,
tuned by renowned audio expert, Mr. Mark Levinson.
Speakers are embedded in strategic spots behind the
front cabinet and use minute vibrations to turn the
entire front bezel into the speaker system. The result
is a clean, polished look, and enhanced audio by
increasing the “sweet spot”, giving a wider and richer
sound field.

HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."

is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under
license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.
“

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

High-definition television. High-resolution digital
television broadcast and playback system composed
of roughly a million or more pixels, 16:9 aspect-ratio
screens, and AC3 digital audio. A subset of digital
television, HDTV formats include 1080i and 720p
resolutions.

Unlike other sensors which can only sense brightness
of ambient light, LG’s “Intelligent Sensor” uses 4,096
sensing steps to evaluate its surroundings. Using a
sophisticated algorithm, the LG processes picture
quality elements including brightness, contrast, color,
sharpness and white balance. The result is a picture
optimized for it’s surroundings, more pleasing to
watch and which can also save up to 50% in power
consumption.

Matches the original frame rate of the film for a more
film-like experience

View videos and photos and listen to music on your
TV through USB 2.0 (‘videos’ dependent on model).

■

This feature is not available for all models.

PREPARATION

9

PREPERATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.

The accessories included may differ from the images below.

Owner’s Manual

Power Cord

CD Manual

Protective Bracket and

Screw for Power Cord

(Refer to P.17, P.18)

Cable Holder

(Refer to P.17)

* Wipe spots on the exterior only with the pol-

ishing cloth.

* Do not wipe roughly when removing stains.

Excessive pressure may cause scratches or
discoloration.

Polishing Cloth

(Not included with all

models.)

OOppttiioonnaall EExxttrraass

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin
cable) PC connection, the user
must use shielded signal interface
cables with ferrite cores to maintain
standards compliance.

x 2

Torx plus

Star head screw

(Refer to P.15, P.16)

Screw for

stand fixing

(Refer to P.20)

Screws for stand

assembly

(Refer to P.15)

x 4 x 4

1.5V 1.5V

Remote Control,

Batteries

M
UTE

RETU

R
N

CC

TV

POW

ER

GUIDE

PORTAL

ENTER

VOL

CH

123

456

78

0

9

FLASHBK

VCR

DVD

INPUT

M

E
NU

INFO

i

STB

P
A

G

E

PIP

SAP

PIP CH-

PIP CH+

PIP SWAP

PIP INPUT

ALPHA/NUM

REMOVE

RATIO

TIMER

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

Protection Cover

(Refer to P.15)

Plug-in type Holder

(Refer to P.17)

FFoorr 3322//3377//4422LLGG771100HH

(For 32LG710H)

Screws for stand

fixing

(Refer to P.20)

Washers for stand

fixing

(Refer to P.20)

x 2

Cable Holder

(Refer to P.18)

Plug-in type Holder

(Refer to P.18)

(For 32/37/42LD650H, 32/37/42LD655H)

Screw for stand fixing

(Refer to P.20)

Screws for stand assembly

(Refer to P.16)

x 8

(M4 x 20)

Protection Cover

(Refer to P.16)

FFoorr 3322//3377//4422//4477//5555LLDD665500HH,, 3322//3377//4422LLDD665555HH

Nuts for stand

fixing

(Refer to P.20)

x 2

x 2

Rubber for stand

fixing

(Refer to P.20)

x 4

PREPARATION

10

PREPARATIONPREPARATION

FRONT PANEL INFORMATION

■

Image shown may differ from your TV.

POWER Button

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates blue when the set is

switched on.

VOLUME (+, -)
Buttons

ENTER Button

MENU Button

INPUT Button

Remote Control Sensor

CHANNEL( , )
Buttons

Intelligent Sensor

Adjusts picture according to
the surrounding conditions.

32/37/42LG710H

CH

VOL

ENTER

MENU

INPUT

PREPARATION

11

Intelligent Sensor

Adjusts picture according to the surrounding condi­tions.

Power/Standby Indicator

Illuminates red in standby mode.
Illuminates blue when the set is

switched on.

Remote Control Sensor

SPEAKER

VOLUME (+, -)
Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

CHANNEL( , )
Buttons

32/37/42/47/55LD650H, 32/37/42LD655H

CH

VOL

ENTER

MENU

INPUT

PREPARATION

12

PREPARATION

■

Image shown may differ from your TV.

BACK PANEL INFORMATION

R

/

10

3

8

R

ANTENNA INANTENNA IN

M.P.I.M.P.I.

7

1

4

92

13

14

15

6

6

5

32/37/42LG710H

12

11

11

16

HDMI/DVI IN

2

1(DVI)

INTERFACE

RJP

USB IN

GAME

CONTROL

UPDATE

RS-232C IN

(SERVICE ONLY)

AV IN 1

OPTICAL

DIGITAL

AUDIO OUT

AUDIO

/

MONO

SPEAKER OUT

8

REMOTE

CONTROL OUT

VIDEO

R

AUDIO

L/MONO

VIDEO

AV IN 2

LAN

(SERVICE ONLY)

RGB(PC)

RGB IN

VIDEO

COMPONENT IN

RESET

TV-LINK

CFG

(RGB/DVI)

AUDIO

AUDIO

PREPARATION

13

R

ANTENNA INANTENNA IN

M.P.I.M.P.I.

14

6

32/37/42LD650H, 32/37/42LD655H

REMOTE

CONTROL

OUT

OPTICAL

DIGITAL

UPDATE

RESET

LAN

HDMI/DVI IN

2

1

RJP

INTERFACE

SPEAKER

OU

T

8

RGB IN (PC)

AUDIO IN

(RGB/DVI)

TV-LINK CFG

GAME

CONTROL

RS-232C IN

(SERVICE ONLY)

AUDIO OUT

A
V IN 1

AUDIO

VIDEO

MONO

/

COMPONENT

IN

L

R

AC IN

1

13

3

4

2

10

9

6

5

8

/

15

7

47/55LD650H

REMOTE

CONTROL

OUT

OPTICAL

DIGITAL

UPDATE

RESET

LAN

HDMI/DVI IN

2

1

RJP

INTERFACE

SPEAKER

OU

T

8

RGB IN (PC)

AUDIO IN

(RGB/DVI)

TV-LINK CFG

GAME CONTROL

/ M.P. I.

RS-232C IN

(SERVICE ONLY)

AUDIO OUT

A
V IN 1

AUDIO

VIDEO

MONO

/

COMPONENT

IN

L

R

ANTENNA

IN

1

13

3

4

2

10

6

5

8

7

9

14

11

11

AC IN

AV IN 2

L/MONO

R

AUDIO

VIDEO

USB IN

/

15

12

12

11

16

16

11

USB IN

R

AUDIO

L/MONO

VIDEO

AV IN 2

PREPARATION

14

PREPARATION

HDMI/DVI IN

Digital Connection. Supports HD video and Digital
audio.

Accepts DVI video using an adapter or HDMI to DVI
cable (not included)

RGB (PC)

Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable).

AUDIO (RGB/DVI)

1/8” headphone jack for analog PC audio input.

LAN (SERVICE ONLY)
For connecting to a control network.

RESET

Performs a hardware reset.

UPDATE

Enables/disables software downloads and debug mode.

TV - LINK CFG

Computer input for programming Free To Guest ser­vices.

GAME CONTROL

Input port for third party game Controllers.

M.P. I.

Allows VOD/PPV devices or set-top boxes to control
the TV.

RS-232C IN (SERVICE ONLY)

Used for software updates.

OPTICAL DIGITAL AUDIO OUT

Optical digital audio output for use with amps and
home theater systems.

Note: In standby mode, this port doesn’t work.

SPEAKER OUT 8

Ω

For use with external speakers.

REMOTE CONTROL OUT

IR output for controlling an auxiliary device.

AV (Audio/Video) IN 1/2

Analog composite connection. Supports standard
definition video only (480i).

COMPONENT IN

Analog Connection. Supports HD.
Uses a red, green, and blue cable for video & a red

and white cable for audio.

RJP INTERFACE (REMOTE JACK PACK PORT)

Connect this to an LG remote jack pack system.

ANTENNA IN

Connect an antenna to receive over-the-air (OTA)
signals.

Power Cord Socket

AC power input.
Caution: Never attempt to operate the TV on DC

power.

USB IN

Used for viewing multimedia files.

1

2

3

4

5

6

8

7

9

11

12

13

14

15

10

16

PREPARATION

15

STAND INSTRUCTIONS

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

Assemble the parts of the

SSTT AANNDD BB OODDYY

with the

SSTT AANNDD BBAA SSEE

of the TV.

1

2

Insert the stand as shown.

3

SSTT AANNDD BBOO DDYY

SSTT AANNDD BBAA SSEE

■

Image shown may differ from your TV.

GG

When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.

NOTE

!

DETACHMENT

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

1

Remove the four screws that hold the base on.

2

Detach the stand from the TV.

3

INSTALLATION

4

or

x 4

Tighten the stand with the
four screws (provided as parts
of the TV).

Tighten the two of these four screws
and the two Torx plus star head screws

(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head dri­ver bit (not provided as parts of the TV).

x 2

x 2

After removing the stand, install the included
pprrootteecctt iioonn ccoovv eerr

over the hole for the stand.

Press the

PPRR OOTTEECCTTIIOO NN CCOOVVEERR

into the TV

until you hear it click.

PROTECTION COVER

32/37/42LG710H

PREPARATION

16

PREPARATION

32/37/42/47/55LD650H, 32/37/42LD655H

AC IN

C
A
B
L
E
M

A
N
A
G
E
M

E
N
T

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

Assemble the parts of the

SSTT AANNDD BB OODDYY

with the

SSTT AANNDD BBAA SSEE

of the TV.

1

2

Assemble the TV as shown.

3

A
C

I
N

C
A
B
L

E
M
A
N

A
G
E
M

E
N

T

SSTT AANNDD BBOO DDYY

SSTT AANNDD BBAA SSEE

GG

When assembling the desk type stand, make sure
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
installation). Do not over tighten.

NOTE

!

DETACHMENT

A

C
I
N

C
A
B
L

E
M
A
N

A
G
E
M
E
N

T

Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.

1

Remove the screws that hold the stand on.

2

Detach the stand from TV.

3

A

C
I
N

C
A
B

L
E
M
A

N
A
G

E
M
E
N

T

INSTALLATION

After removing the stand, install the included
pprrootteecctt iioonn ccoovv eerr

over the hole for the stand.

Press the

PPRR OOTTEECCTTIIOO NN CCOOVVEERR

into the TV

until you hear it click.

PROTECTION COVER

A

C
I

N

C

A
B
L
E

M
A
N
A
G

E
M
E
N

T

M4 x 20

4

or

x 4

Tighten the stand with the
four screws (provided as parts
of the TV).

Tighten the two of these four screws
and the two Torx plus star head screws

(provided as parts of the TV) to secure the TV. Tighten
the two Torx plus star head screws with a star head dri­ver bit (not provided as parts of the TV).

x 2

x 2

PREPARATION

17

CABLE MANAGEMENT

■

Image shown may differ from your TV.

Connect the cables as necessary.
To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.
To help prevent the power cable from being
removed by accident, secure the power
cable with the included PPROTECTIVE

BRACKET /SCREW. The 32LG710H use a
Plug-in type Holder instead of using a

screw.

Open the CABLE MANAGEMENT CLIP as
shown.

If a CABLE HOLDER was included with your

TV, install it as shown.

1

2

Put the cables inside the CABLE MANAGEMENT
CLIP and snap it closed.

3

GG

Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.

- If the TV is dropped, you may be injured or the
product may be broken.

GG

With some TVs, the PLUG-IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.

NOTE

!

CABLE MANAGEMENT CLIP

CABLE HOLDER

PROTECTIVE BRACKET/SCREW

PLUG-IN TYPE HOLDER
(For 32LG710H model)

Or

32/37/42LG710H

PREPARATION

18

PREPARATION

32/37/42/47/55LD650H, 32/37/42LD655H

Connect the cables as necessary.
To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.
To help prevent the power cable from being
removed by accident, secure the power cable
with the included PPROTECTIVE BRACKET
/SCREW. The 32/37/42LD650H,
32/37/42LD655H use a Plug-in type
Holder instead of using a screw.

1

AC IN

Open the CABLE MANAGEMENT CLIP as
shown.

If a CABLE HOLDER was included with your
TV, install it as shown.

2

AC IN

Put the cables inside the CABLE MANAGE­MENT CLIP and snap it closed.

3

AC IN

PROTECTIVE BRACKET/SCREW

PLUG-IN TYPE HOLDER
(For 32/37/42LD650H,

32/37/42LD655H model)

Or

GG

Do not hold the CABLE MANAGEMENT CLIP
when moving the TV.

- If the TV is dropped, you may be injured or the
product may be broken.

GG

With some TVs, the PLUG-IN TYPE HOLDER
and the CABLE HOLDER are included. If these
holders are inserted into the hole provided on
back of the TV, they cannot be removed.

NOTE

!

CABLE MANAGEMENT CLIP

CABLE HOLDER

(For 32/37/42LD650H,

32/37/42LD655H model)

PREPARATION

19

PREPARATION

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

■

Image shown may differ from your TV.

4 inches

4 inches

4 inches

4 inches

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction to suit your viewing posi­tion.

GG

Ensure adequate ventilation by following the clearance recommendations.

GG

Do not mount near or above any type of heat source.

CAUTION

20°: 47/55LD650H
90°: Other Models

PREPARATION

20

PREPARATION

ATTACHING THE TV TO A DESK

The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product.

GG

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV may cause injury.

WARNING

1-Screw

(provided as parts of the product)

Desk

Stand

4-Screws

(not provided as parts of the product)

GG

Recommended screw size: M5 x L (

*L: Table depth + 8~10mm

)

ex) Table depth: 15mm, Screw: M5 x 25

Desk

Stand

32/37/42LD650H, 32/37/42LD655H

Stand

Desk

32/37/42LG710H

47/55LD650H

Stand

Desk

4-Screws

(not provided as parts of the product)

2-Screws, 2-Washers, 2-Nuts, 4-Rubber

(provided as parts of the product)

GG

You can select any type of attachment (Type 1 or Type 2)

GG

Do not over tighten.

Type 1

Type 2

2-Screws

(not provided as parts of the product)

PREPARATION

21

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please
contact an installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.

AA

BB

Model

VESA (A *B)

Standard Screw Quantity

Wall Mounting Bracket

(sold separately)

32 LG 710 H

37LG710H,

42LG 710H

32LD650H,

32LD655H

37LD650H,
37LD655H,
42LD650H,

42LD655H,

47LD650H

55LD650H

200* 10 0 M 4 4

200* 10 0 M 4 4

200* 200 M6 4

400* 400 M6 4

200* 200 M6 4

AA

BB

AW-47LG30M

LSW100B, LSW100BG

LSW200B, LSW200BG

LSW400B, LSW400BG,

DSW400BG

RW230 AW-47LG30M

PREPARATION

22

PREPARATION

GG

Do not install your wall mount kit while the TV is plugged in. It may result in personal injury due to electric shock.

CAUTION

GG

Screw length needed depends on the wall mount
used. For further information, refer to the instruc­tions included with the mount.

GG

Standard dimensions for wall mount kits are shown
in the table.

GG

When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.

GG

Do not use screws longer then the standard dimen­sion, as they may cause damage to the inside of
the TV.

GG

For wall mounts that do not comply with the VESA
standard screw specifications, the length of the

screws may differ depending on their specifica­tions.

GG

Do not use screws that do not comply with the
VESA standard screw specifications.

Do not use fasten the screws too strongly, this may
damage the TV or cause the TV to a fall, leading to
personal injury. LG is not liable for these kinds of
accidents.

GG

LG is not liable for TV damage or personal injury
when a non-VESA or non specified wall mount is
used or the consumer fails to follow the TV installa­tion instructions.

NOTE

!

PREPARATION

23

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the pic­ture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the

bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (sold separately) to tie the product. It is safer to
tie the rope so it becomes horizontal between the wall and the prod­uct.

■

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

■

Image shown may differ from your TV.

GG

Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

GG

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

NOTE

!

PREPARATION

24

PREPARATION

R

ANTENNA INANTENNA IN

M.P.I.

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

This image refers to using a Wall Antenna Socket or Outdoor
Antenna without a Cable Box Connection.

2. Cable

Wa ll
Antenna
Socket

Outdoor
Antenna
(VHF, UHF)

Cable TV
Wall Jack

Multi-family Dwellings/Apartments
(Connect to wall antenna socket)

RF Coaxial Wire (75

Ω)

RF Coaxial Wire (75

Ω)

Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire
when connecting the antenna.

Copper Wire

- For optimum picture quality, adjust the antenna direction if needed.

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

■

To prevent damage, do not connect to the power outlet until all connections are made between the devices.

R

ANTENNA INANTENNA IN

M.P.I.

This image refers to using a cable connection without a cable box.

- If you experience a poor signal when using cable, make sure the RF cable is screwed in completely.
Contact your cable company is a poor signal persists.

PREPARATION

25

MPI CARD SLOT / PPV CARD INSTALLATION

(Except 47/55LD650H)

1. Remove the two MPI card retainer screws.

2. Pull out current MPI card far enough so that the RF cable can be detached from the old card.

3. Detach RF cable.

4. Place new PPV card into slot and slide it in far enough to reconnect RF cable.

5. Insert card all the way into the slot making sure it is fully seated into back plane connector.

6. Replace the two card retainer screws.

The MPI card is equipped with an RF jack for antenna/cable signal source connection.
This card can be removed and replaced with a third-party PPV (Pay-Per-View) card.

MPI Card Removal / PPV Card Installation

RF CABLE

ANTENNA IN

M.P.I.

M.P. I.

Card Slot

GG

There is an RF cable connected to the back of the card. Remove the card slowly.

WARNING

EXTERNAL EQUIPMENT SETUP

26

HD RECEIVER SETUP

EXTERNAL EQUIPMENT SETUP

This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However,
if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as
shown below.

Component Connection

1. How to connect

Connect the video outputs (Y, PB

, P

R

)

of the digital set-

top box to the

CC OOMMPPOONNEENNTT II NN VV IIDDEEOO

jacks on

the TV. Match the jack colors (Y = green, P

B

= blue, and

P

R

= red).

Connect the audio output of the digital set-top box to
the

CC OOMMPPOONNEENNTT IINN AAUU DDIIOO

jacks on the TV.

2

1

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

CC oo mmppoonn eenn tt

input source using the

IINN PP UUTT

button

on the remote control.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Image shown may differ from your TV.

U

RESET

LAN

(SERVICE ONLY)

COMPONENT IN

VIDEO

AUDIO

R

(S

/

VIDEO

AUDIO

COMPONENT IN

RGB(PC)

AUDIO
(RGB/DVI)

RGB IN

TV-LINK

CFG

Y L RP

B

P

R

1

2

Y, C

B/P

B

, C

R/PR

Supported Resolutions

Horizontal Vertical

Frequency(kHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.47 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component

Yes

Yes

Yes

Yes

Yes

HDMI

No

Yes

Yes

Yes

Yes

For 37/42/47/55LD650H, 37/42LD655H

1920x1080p

For 37/42/47/55LD650H, 37/42LD655H

EXTERNAL EQUIPMENT SETUP

27

HDMI Connection

Connect the digital set-top box to

HHDDMMII//DD VVII IINN 11

((DDVVII)) or22

jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box.
(

Refer to the owner’s manual for the digital set-top box.

)

■

Select

HHDDMMII11

or

HHDDMMII22

input source with using the

IINNPPUUTT

button on the remote control.

2

1

HDMI-DTV

HDMI/DVI IN

2

1(DVI)

RJP

INTERFACE

VID

RGB

/

HDMI/DVI IN

2

1(DVI)

HDMI-DTV OUTPUT

1

Horizontal Vertical

Frequency(kHz)Frequency(Hz

)

31.47 59.94

31.47 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.94

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.939

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

GG

If the HDMI cables don’t support High Speed
HDMI, it can cause flickers or no screen display. In
this case use the latest cables that support High
Speed HDMI.

GG

HDMI mode supports PCM, Dolby Digital audio
format.

NOTE

!

1920x1080p

For 37/42/47/55LD650H, 37/42LD655H

EXTERNAL EQUIPMENT SETUP

28

EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

UPDA

RESET

LAN

(SERVICE ONLY)

RJP

INTERFACE

COMPONENT IN

VIDEO

AUDIO

R

(S

/

HDMI/DVI IN

2

1(DVI)

LR

DVI-DTV OUTPUT

L

R

TV-LINK

CFG

CO

1

2

GG

A DVI to HDMI cable or adapter is required for this
connection. DVI doesn't support audio, so a separate
audio connection is necessary.

NOTE

!

Connect the DVI output of the digital set-top box to
the

HHDDMMII//DDVVII IINN 11 ((DD VVII ))

jack on the TV.

Connect the audio output of the digital set-top box to
the

AAUU DDIIOO (( RRGGBB//DD VVII ))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the digital set-top box. (Refer to the owner’s man­ual for the digital set-top box.

)

■

Select the

HHDD MMII11

input source on the TV using the

IINNPP UUTT

button on the remote control.

2

1

EXTERNAL EQUIPMENT SETUP

29

DVD SETUP

Component Connection

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPBP

R

Video output ports

on DVD player

Y

Y

Y

Y

P

B

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

Connect the video outputs (Y, P

B, PR

)

of the DVD to the

CC OOMMPPOONNEENNTT IINN VVIIDDEEOO

jacks on the TV.

Match the jack colors (Y = green, P

B = blue, and P

R = red

)

.

Connect the audio outputs of the DVD to the
CC OOMMPPOONNEENNTT IINN AAUU DDIIOO

jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

CC oo mmppoonn eenn tt

input source on the TV using the

IINN PPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

U

RESET

LAN

(SERVICE ONLY)

COMPONENT IN

VIDEO

AUDIO

R

(S

/

VIDEO

AUDIO

COMPONENT IN

RGB(PC)

AUDIO
(RGB/DVI)

RGB IN

TV-LINK

CFG

Y L RP

B

P

R

1 2

HDMI Connection

Connect the HDMI output of the DVD to the
HHDDMMII//DDVVII IINN 11 ((DD VVII )) or22

jack on the TV.

No separate audio connection is necessary.
HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select the

HHDDMMII11 orHHDDMMII22

input source on the TV

using the

IINN PPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

2

1

(S

HDMI/DVI IN

2

1(DVI)

RJP

INTERFACE

COM

VIDEO

/

HDMI/DVI IN

2

1(DVI)

HDMI OUTPUT

RGB IN

1

EXTERNAL EQUIPMENT SETUP

30

EXTERNAL EQUIPMENT SETUPEXTERNAL EQUIPMENT SETUP

VCR SETUP

Antenna Connection

■

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

/

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

ANTENNA INANTENNA IN

M.P.I.

Wall Jack

Antenna

1

2

Connect the RF antenna out socket of the
VCR to the

AANNTTEENNNNAA IINN

socket on the

TV.

Connect the antenna cable to the RF
antenna in socket of the VCR.

1. How to connect

2. How to use

■

Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.

■

Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.

)

2

1

Composite (RCA) Connection

Connect the

AA UUDD IIOO/VV IIDDEEOO

jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red)

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.

)

■

Select the

AA VV 11

input source on the TV using the

IINN PPUUTT

button on the remote control.

■

If connected to

AAVV IINN 22

, select

AAVV22

input source on the TV.

1

GG

If you have a mono VCR, connect the audio cable
from the VCR to the

AAUUDDIIOO LL// MMOONNOO

jack of the

TV.

NOTE

!

L

R

S-VIDEO

VIDEO

OUTPUT
SWITCH

ANT IN

ANT OUT

OPTICAL

DIGITAL

AUDIO OUT

UPDATE

AV IN 1

AUDIO

VIDEO

/

REMOTE
CONTROL

OUT

SPEAKER

OUT

8

RS-232C IN

(SERVICE ONLY)

MONO

/

AV IN 1

AUDIO

VIDEO

MONO

/

GAME

CONTROL

1

EXTERNAL EQUIPMENT SETUP

31

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks
between TV and external equipment.
Match the jack colors

.

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select the

AA VV22

input source on the TV using the

IINNPP UUTT

button on the remote control.

■

If connected to

AAVV IINN 11

input, select the

AA VV 11

input source on the TV.

■

Operate the corresponding external equipment.

1

1

Connect one end of the optical cable to the TV’s

OO PP TTII--

CC AALL DDIIGGIITTAALL AAUUDDIIOO OOUUTT

.

Connect the other end of the optical cable to the digital
audio input on the audio equipment.

Set the “TV Speaker option - Off ” in the AUDIO menu. (

GG

pp ..7733

). See the external audio equipment instruction manu-

al for operation.

AUDIO OUT CONNECTION

Send the TV’s audio to external audio equipment via the Audio Output port.

UPDATE

AV IN 1

AUDIO

VIDEO

/

REMOTE

CONTROL

OUT

SPEAKER

OUT

8

RS-232C IN

(SERVICE ONLY)

MONO

/

OPTICAL

DIGITAL

AUDIO OUT

GAME

CONTROL

1

2

GG

When connecting with external audio equipment, such as
amplifiers or speakers, you can turn the TV speakers off in
the menu. (

GG

pp.. 7733

)

NOTE

!

G

Do not look into the optical output port. Looking at the
laser beam may damage your vision.

GG

Audio with ACP(Audio Copy Protection) function my
block digital audio output.

CAUTION

1. How to connect

2

3

1

USB IN

R

AUDIO

L/MONO

VIDEO

AV IN 2

L R

VIDEO

EXTERNAL EQUIPMENT SETUP

32

EXTERNAL EQUIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection

UPDATE

RESET

()

COMPONENT IN

VIDEO

AUDIO

AV IN 1

AU

RS-232C IN

(SERVICE ONLY

/

AUDIO

RGB OUTPUT

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

1

2

2. How to use

■

Turn on the PC and the TV.

■

Select the

RR GGBB --PPCC

input source on the TV using the

IINN PPUUTT

button on the remote control.

Connect the VGA output of the PC to the

RR GGBB ((PP CC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO ((RRGGBB//DDVVII

))

jack on the TV.

1. How to connect

2

1

DVI to HDMI Connection

UP

RESET

LAN

(SERVICE ONLY)

RJP

INTERFACE

COMPONENT IN

VIDEO

AUDIO

(S

/

HDMI/DVI IN

2

1(DVI)

DVI-PC OUTPUT AUDIO

RGB(PC)

AUDIO

(RGB/DVI)

RGB IN

TV-LINK

CFG

1

2

2. How to use

■

Turn on the PC and the TV.

■

Select the

HHDDMMII11

input source on the TV using the

IINN PPUUTT

button on the remote control.

Connect the DVI output of the PC to the

HHDDMMII//DDVVII IINN

11 ((DDVVII))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO ((RRGGBB//DDVVII))

jack on the TV.

1. How to connect

2

1

EXTERNAL EQUIPMENT SETUP

33

GG

To get the best picture quality, adjust the PC graph­ics card to

1133 66 00xx77 66 88

(32/37/42LG710H,

32LD650H, 32LD655H) or

1199 22 00xx11 00 88 00

(37/42/47/55LD650H, 37/42LD655H).

GG

Depending on the graphics card, DOS mode may
not work if a HDMI to DVI Cable is in use.

GG

In PC mode, there may be noise associated with
the resolution, vertical pattern, contrast or bright­ness. If noise is present, change the PC output to
another resolution, change the refresh rate to
another rate or adjust the brightness and contrast
on the PICTURE menu until the picture is clear.

When you use too long RGB-PC cable, there might

be a noise on the screen.

GG

Avoid keeping a fixed image on the screen for a
long period of time. The fixed image could become
permanently imprinted on the screen.

GG

The synchronization input form for Horizontal and
Vertical frequencies is separate.

GG

Depending on the graphics card, some resolution
settings may not allow the image to be positioned
on the screen properly.

NOTES

!

Supported Display Specifications

Resolution

720x400

1360x768

640x480

800x600

1024x768

1280x768

1280x1024

1920x1080

Horizontal Vertical

Frequency(kHz)Frequency(Hz

)

31.469 70.08

31.469 59.94

35.156 56.25

37.879 60.31

48.363 60.00

47.776 59.87

47.712 60.015

63.981 60.02

67.50 60.00

Resolution

720x400

1360x768

640x480

800x600

1024x768

1280x768

1280x1024

1920x1080

Horizontal Vertical

Frequency(kHz)Frequency(Hz

)

31.469 70.08

31.469 59.94

37.861 72.80

37.879 60.31

48.077 72.18

48.363 60.00

56.476 70.06

47.776 59.870

60.289 74.893

47.712 60.015

63.981 60.020

79.976 75.025

66.587 59.934

HDMI-PCRGB-PC

For 37/42/47/55LD650H, 37/42LD655H

For 37/42/47/55LD650H, 37/42LD655H

EXTERNAL EQUIPMENT SETUP

34

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

Selecting Resolution

When using RGB-PC input, change the resolution in the menus to match the PC’s.
The

PPoossiittiioonn, PPhhaassee

, and

SSiizzee

can also be adjusted.

Select

PPII CCTTUURREE

.

Select

RR eessooll uuttiioonn

.

1

MENU

3

ENTER

4

Select

SSccrr eeeenn ((RRGGBB--PPCC))

.

2

ENTER

5

Select the desired resolution.

ENTER

ENTER

Auto Config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

Enter

Move

PICTURE

E

RG

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

1024 x 768

1280 x 768

1360 x 768

EXTERNAL EQUIPMENT SETUP

35

Auto Configure

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.

• If the position of the image is still not
correct, try Auto adjustment again.

• If picture needs to be adjusted again
after Auto adjustment in RGB-PC, you
can adjust the

PPoo ss ii ttii oo nn, SSii zz ee

or

PPhh aassee

.

Select

PPII CCTTUURREE

.

Select

AAuuttoo ccoonnff iigg ..

.

1

MENU

3

ENTER

4

Select

SSccrr eeeenn ((RRGGBB--PPCC))

.

2

ENTER 5ENTER

Start Auto Configuration.

Select

YY ee ss

.

ENTER

Auto Config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

Yes No

Enter

Move

PICTURE

E

RG

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

EXTERNAL EQUIPMENT SETUP

36

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.

This feature operates only in RGB-PC mode.

■

PPoossii tt ii oo nn

: This function is to adjust pic­ture to left/right and up/down as you
prefer.

■

SSiizzee

: This function is to minimize any
vertical bars or stripes visible on the
screen background. And the horizontal
screen size will also change.

■

PPhh aassee

: This function allows you to
remove any horizontal noise and clear or
sharpen the image of characters.

Select

PPII CCTTUURREE

.

Select

PPoossii tt ii oo nn, SSiizzee

, or

PPhh aassee

.

1

MENU

3

ENTER

4

Select

SSccrr eeeenn ((RRGGBB--PPCC))

.

2

ENTER 5ENTER

Make appropriate adjustments.

ENTER

Auto Config.

Resolution

Position

Size

Phase

Reset

GF

D

E

SCREEN

Move

Prev.

Enter

Move

PICTURE

E

RG

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

EXTERNAL EQUIPMENT SETUP

37

Screen Reset (Reset to original factory values)

Returns

PPooss iittiioonn, SSii zz ee

, and

PPhhaassee

to the default factory settings.

This feature operates only in RGB-PC mode.

Select

PPII CCTTUURREE

.

Select

RR eesseett

.

1

MENU

3

ENTER

4

Select

SSccrr eeeenn ((RRGGBB--PPCC))

.

2

ENTER 5ENTER

Select

YY ee ss

.

ENTER

Auto config.

Position

Resolution

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

Yes No

Enter

Move

PICTURE

E

RG

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

WATCHING TV / CHANNEL CONTROL

38

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

MUTE

RETURN

CC

TV

POWER

GUIDE

PORTAL

ENTER

VOL

CH

123

456

7809

FLASHBK

VCR

DVD

INPUT

MENU

INFO

i

STB

P
A
G
E

PIP

SAP

PIP CH-

PIP CH+

PIP SWAP

PIP INPUT

ALPHA/NUM

REMOVE

RATIO

TIMER

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

POWER

TV/STB/DVD/VCR

GUIDE

PORTAL

INFO

Turns your TV or any other programmed equipment on
or off, depending on mode.

Selects the remote’s operating mode: TV, STB, DVD, or
VCR.

Displays and removes the electronic channel guide.

Displays and removes the hotel interactive menu.

Displays information about the selected or current events.

NUMBER

button

— (DASH)

FLASHBK

VCR/DVD/USB
control buttons

PIP

RATIO

TIMER

SAP

PIP CH +/-

PIP SWAP

PIP INPUT

Enters channel numbers or other numbers required. Also
supports characters.

Selects a program number for multiple program channels
such as 2-1, 2-2, etc.

Tunes to the last channel or input viewed.

Controls video cassette recorders or DVD players or USB.

Toggles through picture-in-picture options.

Changes the aspect ratio.

GG

pp..5588

Turns the TV off in a set amount o f time.

GG

pp..8844

Analog mode: Selects MTS sound (Mono, Stereo, or a
SAP)

GG

pp..7755

DTV mode: Changes the audio language.

Changes the PIP channel.

Exchanges the main/sub images.

Selects the connected input source for the sub-picture.

WATCHING TV / CHANNEL CONTROL

WATCHING TV / CHANNEL CONTROL

39

Installing Batteries

■

Open the battery compartment cover on the back side and install
the batteries with the correct polarity (+with +,-with -).

■

Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.

■

Close cover.

THUMBSTICK

(Up/Down/Left

Right/ENTER)

RETURN

MENU

INPUT

Navigates the on-screen menus and adjusts the system settings to your preference.

Clears all on-screen displays and returns to TV viewing from any menu.

Displays the main menu.

Rotates through inputs.
Also switches the TV on from standby.

VOLUME UP

/DOWN

CC

MUTE

CHANNEL

UP/DOWN

PAG E

UP/DOWN

Adjusts the volume.

Selects a closed caption.

GG

pp..7788

Switches the sound on or off.

GG

pp..4400

Selects available channels.

Moves from one full set of screen information to the next one.

WATCHING TV / CHANNEL CONTROL

40

WATCHING TV / CHANNEL CONTROLWATCHING TV / CHANNEL CONTROL

NOTE

!

GG

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

Press the

CCHH((

or ))or

NNUUMMBBEERR

buttons to select a channel number.

1

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the

VVOOLL ((++

or

--))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

or

VVOOLL ((++

or

--))

button.

Adjust the volume to suit your personal preference.

1

2

3

TURNING ON THE TV

First, connect the power cord correctly.
At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the button on the TV or press
the

PPOO WWEE RR

button on the remote control.

Select the viewing source by using the

IINNPPUUTT

button on the remote control.

When finished using the TV, press the

PPOOWWEERR

button on the remote control.

The TV reverts to standby mode.

1

2

3

WATCHING TV / CHANNEL CONTROL

41

ON-SCREEN MENUS SELECTION

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Display each menu.

Select a menu item.

Accept the current selection.

1

MENU

3

2

ENTER

ENTER

Return to TV viewing.

4

MENU

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

CHANNEL

CHANNEL

OPTION

PICTURE

LOCK

AUDIO

INPUT

TIME

USB

Enter

Move

Auto Volume : On

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

AUDIO

E

Enter

Move

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

TIME

Enter

Move

Photo List

Music List

Extra Contents

Eject

USB

Enter

Move

TV

AV1

AV2

Component

RGB-PC

HDMI1

HDMI2

INPUT

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Enter

Move

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

OPTION

LR

-+

Enter

Move

Aspect Ratio : 16:9

Picture Mode : Standard

• BackLight 90

• Contrast 90

• Brightness 50

• Sharpness 60

• Color 60

• Tint 0

PICTURE

E

NOTE

!

GG

IInnffiinniittee SSoouunndd

: For 32/37/42/47/55LD650H,

32/37/42LD655H

For USA

For CANADA

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

WATCHING TV / CHANNEL CONTROL

42

WATCHING TV / CHANNEL CONTROL

Enter

Move

CHANNEL

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs and stores them in memory on the
channel list.

Run Auto Tuning again after any Antenna/Cable connection changes.

Select

CC HHAANN NNEELL

.

Select

AAuuttoo TT uunniinn gg

.

Select

YY ee ss

.

Run

AAuuttoo ttuunniinn gg

.

1

MENU

3

2

ENTER

ENTER 4ENTER

■

A password is required to gain access to
Auto Tuning menu if the Lock System is
turned on.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

CHANNEL SETUP

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Check your antenna connection.
The previous channel information
will be updated during Auto
Tuning.

Yes

No

WATCHING TV / CHANNEL CONTROL

43

Select

CC HHAANN NNEELL

.

1

MENU

2

ENTER

If selecting DIGITAL input signal, you can view the on-screen signal strength monitor to see the quality of the
signal being received.

Add/Delete Channel (Manual Tuning)

Select

MMaannuuaall TT uunniinn gg

.

Select

DDII GGIITTAA LL

or

AANN AALL OOGG

.

Select channel you want to add
or delete.

3

ENTER

4

Select

AA dd dd

or

DDeelleett ee

.

5

ENTER

■

A password is required to gain access to
Manual Tuning menu if the Lock System
is turned on.

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

CHANNEL

Enter

Move

CHANNEL

Channel

Select channel type and
RF-channel number.

FF

DIGITAL

GG

2

Close

Delete

DIGITAL 2-1

Bad Normal Good

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

WATCHING TV / CHANNEL CONTROL

44

WATCHING TV / CHANNEL CONTROL

CHANNEL LABEL

Select a channel.

Select channel you want to add or delete.

3

ENTER

4

BLUE

The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit
List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using

CCHH

button during TV viewing.

If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select
it in the

CChh aann nn eell EE dd iitt

menu.

Channel Editing

Select

CC HHAANN NNEELL

.

1

MENU

2

ENTER

Select

CC hhaann nnee ll EEddiitt

.

MENU

Return to TV viewing.

Return to the previous menu.

5

RETURN

Choose preset labels for your channels.
If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a

channel even if you didn't preset a label for the channel.

Select

CC HHAANN NNEELL

.

Select

CC hhaann nnee ll LL aabbeell

.

Select a Channel.

1

MENU

3

2

ENTER

ENTER

Select the appropriate logo for the
channel.

5

Select a channel to set logo.

4

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Ch. Change

Page Change

CH

Navigation

Previous

Add/Delete

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Channel Label

Logo

FF

Disney

GG

Channel

ANALOG 2-0

Close

WATCHING TV / CHANNEL CONTROL

45

INPUT LIST

Select the desired input source.

1

INPUT

TV AV1 AV2

ComponentHDMI1 RGB-PC

TV AV1 AV2 Component RGB-PC

ENTER

■

TT VV

: Select it to watch over-the-air, cable

and digital cable broadcasts.

■

AA VV11 -- 22

: Select them to watch a VCR or

other external equipment.

■

CC oo mm ppoonn ee nntt

: Select them to watch

DVD or a Digital set-top box.

■

RR GGBB --PPCC

: Select it to view PC input.

■

HHDD MM II11-- 22

: Select them to watch high

definition devices.

HDMI2

WATCHING TV / CHANNEL CONTROL

46

WATCHING TV / CHANNEL CONTROL

EXAMPLE ELECTRONIC PROGRAM GUIDE

This is an example of a typical TV electronic program guide showing available programming.

On The Political Scene

Kids Movies

Top Fashions

World Events Today

Channel 01:30 AM

2:30 AM

2:45 AM 3:00 AM

Kids ...

Kids ...

Kids Movies

K&M

17 XYZ

18 K&M

19 PQX

20 WBD

Mon. 29 May 2009 11:07

New Release

Greatest Hits

Kids

EVENT

CHANNEL

SELECTION

PORTAL

INFO

ENTER

PROGRAMMING GRID

Program listings arranged in
time slots

.

CHANNEL LIST

Shows available
channels in numerical
order.

DATE/TIME OSD

Shows current Date/Time.

CHANNEL INDICATOR

Currently tuned channel
and program.

PROGRAM TITLES

Highlight a title and press
Enter to display additional
program information.

FEATURED ATTRACTION

Highlight and click to get
expanded information.

TV PROGRAM

Current program on select­ed channel.

Select

GGUU IIDDEE

button to shows available TV programs.

1

GUIDE

Select a Channel.

2

ENTER

USB

47

USB

USB IN

Memory Key

Connect the USB device to the

UUSS BB II NN

jack

on the side of TV.

3

Select

PPHHOOTT OO LLII SSTT

or

MMUU SS IICC LL IISS TT

or

EEXXTTRR AA CC OONNTTEENNTTSS

.

1

2

■

This TV supports playback of JPG pictures and MP3
audio.

When you connect a USB device, this pop-up menu is displayed automatically.
When the Pop-Up menu does not appear, you can select Photo List or Music List on Extra contents.
On a USB device, you can not add a new folder or delete an existing folder.

or

ENTRY MODES

ENTER

■

Image shown may differ from your TV.

Enter

Move

USB

Select

UUSS BB

.

Select

EEjj eecc tt

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

When removing the USB device

Photo List

Music List

Extra Contents

Eject

Enter

Move

USB

Photo List

Music List

Extra Contents

Eject

Close

Now you can eject USB.

i

Close

Choose the media you want.

Fl

ii

Photo List

Music List

Extra Contents

USB

48

USB

Precautions with USB devices.

GG

Only a USB storage device is recognizable.

GG

If the USB storage device is connected through a USB hub, the device is not recognizable.

GG

A USB storage device using an automatic recognition program may not be recognized.

GG

A USB storage device which uses its own driver may not be recognized.

GG

The recognition speed of a USB storage device may depend on each device.

GG

In case of a card reader, up to four memory cards are concurrently recognizable.

GG

Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be dam­aged.

GG

Only use a USB storage device which has normal music, image or movie files.

GG

Please connect power to a USB storage device (over 0.4A) which requires an external power supply. If not, the
device may not be recognized.

GG

Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.

GG

Some USB storage devices may not be supported or operate properly.

GG

File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100
English characters.

GG

Please backup important files because data on the USB device may be damaged. Data management is the con­sumer's responsibility and as a result, the manufacturer does not cover data damage.

GG

Please use only a USB storage device which was formatted as a FAT32, NTFS file system provided with the Windows
operating system. In case of a storage device formatted as a different utility programme which is not supported by
Windows, it may not be recognized.

GG

Data in a USB storage device cannot be deleted in the NTFS file system.

GG

If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4
partitions or USB memory devices.

GG

The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory.

GG

Any device with more than the recommended capacity may not work properly.

GG

When using a USB HDD via the USB extensing cable, connect a support electric power source.

USB

49

PHOTO LIST

This TV only supports picture in JPEG(.jpg) format.
The On-Screen Display on your model may be slightly different.

Screen Components

Moves to upper level folder

Preview: Displays the
thumbnail/folder name of
the photo in the selected
folder

Current page/Total pages

Total number of marked photos

Corresponding buttons on
the remote control

Select

UUSS BB

.

Select

PPhhoott oo LLii sstt

.

2

1

MENU

1

2

3

4

5

Navigation Popup Menu Exit

5

Page 2/3

No Marked

Photo List

Up Folder

1366

x

768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

JMJ001

3 4

2

1

Supported photo file: *.JPG

• You can view JPG files only.

• Only baseline scan is supported among JPG.

• Supported JPG size: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height)

ENTER

ENTER

USB

50

USB

Photo Selection and Pop-up Menu

Select the target folder or drive.

Select the desired photos.

2

Show the Pop-up menu.

3

1

■

When one or more photos are marked, you can
view individual photos or a slide show of the
marked photos. If no photos are marked, you
can view all photos individually or all photos in
the folder in a slide show.

4

Select the desired Popup menu.

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002 06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006 05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

Drive1

JMJ001

JMJ001

1366x768, 125KB

View

Mark

Mark All

Delete

Close

Navigation Exit

Popup Menu

Navigation Exit

Popup Menu

When you select a file (not folder), this Pop-Up
menu is displayed.

GG

VViieeww

: Display the selected item.

GG

MMaarrkk

: Use to mark a photo.

GG

UUnnmmaarrkk

: Use to unmark a photo.

GG

MMaarrkk AAllll

: Mark all photos on the screen.

GG

UUnn mm aa rrkk AA llll

: Deselect all marked photos.

GG

DDeelleettee

or

DDeelleettee MMaarrkkeedd

: Delete the selected

photo item.

GG

CC lloo ssee

: Close the pop-up menu.

ENTER

ENTER

ENTER

USB

51

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full
screen mode.

■

Use the

CC HH

button to navigate in the

photo page.

Select the target folder or drive.

Select the desired photos.

Show the Pop-up menu.

5

Select

VV ii eeww

.

The selected photo is displayed in
full size.

2

3

1

4

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101 06/10/2008

KY102 04/03/2008

JMJ001 01/01/2000

JMJ002 06/15/2008

JMJ003 04/03/2008

JMJ004

02/18/2008

KY103 03/30/2008

KY104 06/19/2008

KY105 01/31/2008

JMJ005 05/13/2008

JMJ006 05/26/2008

JMJ007 02/18/2008

JMJ008 02/18/2008

Up Folder

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

Drive1

JMJ001

JMJ001

Navigation Exit

Popup Menu

Navigation Exit

Popup Menu

The aspect ratio of a photo may change the size of the
photo displayed on the screen in full size.
Press the

RREETT UU RR NN

button to move to the previous menu

screen.

1/17

Slideshow BGM Delete Option Hide

1366x768, 125KB

View

Mark

Mark All

Delete

Close

ENTER

ENTER

ENTER

USB

52

USB

Press

FF GG

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Album

Enter

Select the

SSlliiddeesshhooww, BBGGMM

,

((RRoottaattee)), DDeelleettee,OOppttiioonn

,

or

HHiiddee..

■

Use button to select the previous or
next photo.

■

Use button to select and control
the menu on the full-sized screen.

6

1/17

Slideshow BGM Delete Option Hide

GG

SSlliiddeesshhooww

: Selected photos are displayed during the
slide show. If no photo is selected, all photos in the cur­rent folder are displayed during slide show.

■

Set the time interval of the slide show in

OO pp tt ii oo nn

.

GG

BB GGMM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

OO pp tt ii oo nn

.

GG

((RRoottaa tt ee))

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

GG

DDeelleett ee

: Delete photos.

GG

OO pp tt ii oo nn

: Set values for

SSlliiddee SS pp eeeedd

and

MMuu ssii cc

AA ll bb uumm

.

■

Use button and

EENN TTEE RR

button to set

values. Then go to and press

EENN TTEE RR

to save

the settings.

■

You cannot change

MMuussiicc AAll bb uumm

while BGM is

playing.

GG

HHiidd ee

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press
EENN TTEE RR

button to display.

ENTER

USB

53

MUSIC LIST

You can use the Music List menu to play MP3 files from a USB storage device.
This TV cannot play back copy-protected files.
The On-Screen Display on your model may be slightly different.

Screen Components

Moves to upper level folder

Preview: If a supported pic­ture of the album jacket is
in the file, it will be dis­played here.

Current page/Total pages

Total number of marked files

Corresponding buttons on
the remote control

1

3

4

5

2

Select

UUSS BB

.

Select

MMuussiicc LLii sstt

.

1

2

MENU

Music List

Up Folder

Title Duration

3 4

2

1

Page 2/3

No Marked

Drive1

Navigation Popup Menu Exit

5

AA

00:00 / 04:16

Up Folder

Supported music file: *.MP3

Bit rate range 32 Kbps - 320 Kbps

• Sampling rate (Sampling Frequency)
MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz
MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz
MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz

ENTER

ENTER

USB

54

USB

Music Selection and Pop-up Menu

■

Use the

CC HH

button to navigate in the

music page.

■

If no music is marked, all the music in the fold­er will be played in sequence. When one or
more music files are marked, the marked music
files will be played in sequence. If you want to
listen to only one song repeatedly, just mark
that one file and play.

Select the target folder or drive.

Select the desired musics.

Show the Pop-up menu.

Select the desired Pop-up menu.

2

3

1

4

5

RETURN

Return to TV viewing.

Navigation Exit

Popup Menu

Navigation

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

AA

00:00 / 04:16

Up Folder

Drive1

Title

Duration

Page 2/3

No Marked

Music List

Up Folder

AA

00:00 / 04:16

Up Folder

Drive1

Title

Duration

3945 KB
128 Kbps

Play

Play with Photo

Mark

Mark All

Delete

Close

GG

PPllaa yy

(During stop): Play the selected file.

Once a song finishes playing, the next selected
one will be played. When there are no selected
files to play, the next one in the current folder
will be played. If you go to a different folder and
press the

EENN TTEE RR

button, the current song in

playback will stop.

GG

PPllaayy MMaa rrkkeedd

: Play the selected files. Once a
file finishes playing, the next selected one will
be played automatically.

GG

SSttoopp PP ll aayy

(During playback): Stop the play-

ing files.

GG

PPllaayy wwiitt hh PP hhoottoo

: Start playing the selected

files and then move to the Photo List.

GG

MMaarr kk ::

Use to mark a file.

GG

UUnn mm aarr kk ::

Use to unmark a file.

GG

MMaarr kk AAllll

: Mark all files in the folder.

GG

UUnn mm aa rrkk AA llll

: Deselect all marked files.

GG

DDeelleettee

or

DDeelleettee MMaarrkkeedd

: Delete the selected

files.

GG

CC lloo ssee

: Close the pop-up menu.

ENTER

ENTER

ENTER

USB

55

■

The play information box (as shown below) will automatically
move across the screen when there is no user input to pre­vent a fixed image remaining on the screen for a extended
period of time.

NOTE

!

GG

When music is playing, is displayed in front of the music play time.

GG

A damaged or corrupted music file that does not play displays 00:00 as the play time.

GG

Files downloaded from a paid service with copyright protection are not supported and will not play.

GG

Press

EENN TTEE RR

, AAor

RR EETT UURRNN

button to stop the screen saver.

EXTRA CONTENTS

Extra Contents will be activated when Data Channel service is available.

Select

UUSS BB

.

Select

EExxttrraa CCoonntt eenntt ss

.

1

2

MENU

ENTER

ENTER

NOTE

!

GG

Pro:Centric contents in USB memory stick can be played.

GG

For more information. contact to Customer Support.(www.lgcommercial.com)

Close

Choose the media you want.

Fl

ii

Photo List

Music List

Extra Contents

PICTURE CONTROL

56

PICTURE CONTROL

PIP (PICTURE-IN-PICTURE)

PIP enables the end user to view two sources on the screen at the same time. The end user can switch
between the Main and Sub picture sizes.

7

8

9

0

PQRS

TUV

WXYZ

PIP CH-

PIP CH+

PIP SWAP

PIP INPUT

PIP

SAP

FLASHBK

TIMER

&@

RATIO

PIP INPUT

Selects viewing source for PIP
window.

PIP SWAP

Switches Main screen and
PIP window sources.

PIP CH+

Selects next higher channel

for PIP window.

PIP CH-

Selects next lower channel

for PIP window.

PIP Operation

1. Connect auxiliary source(s) to TV
connections panel.

2. Enter Installer menu to be sure
source(s) is enabled.

3. Use the interactive remote provided
in the room to operate PIP.

4. Press PIP on remote.
Use the PIP function keys to
operate the available PIP features.

5. To exit PIP mode, simply press PIP.

PIP

Turns PIP mode on and off.

■

Note: Actual size of Main screen and PIP inset may be different than
shown above.

PICTURE CONTROL

57

AV1, AV2, HDMI1, HDMI2

TV

TV, AV1or AV2, HDMI1, HDMI2

AV1or AV2

Main Picture Source

Available Sub Picture Sources

HDMI1or HDMI2

Component, RGB-PC

TV, AV1, AV2, HDMI1or HDMI2

TV, AV1, AV2, HDMI1, HDMI2

PICTURE CONTROL

58

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV.

■

RGB-PC input source can only use 4:3 or 16:9 aspect ratio.

Press the

RR AATTIIOO

button repeatedly to select the picture options

:

SSee tt BByy PP rrooggrraa mm,, 44::33 ,, 11 66 ::99 ,, ZZoooomm,, JJuusstt SSccaa nn

.

1

RATIO

2

RETURN

Return to TV viewing.

1166 ::99

■

You can also adjust

AAssppee cc tt RRaattii oo

in

the

PPIICCTTUURREE

menu.

PICTURE CONTROL

59

Set by program

Selects the proper picture proportion to match
the source’s image.

4:3

Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.

16:9

Adjust the picture horizontally, in a linear pro­portion to fill the entire screen.

(4:3 4:3)

(16:9 16:9)

Set By Program

Set By Program

PICTURE CONTROL

60

PICTURE CONTROL

Zoom

Choose Zoom when you want to view the picture
without any alteration. However, the top and
bottom portions of the picture will be cropped.

Just Scan

Normally the edges of video signals are cropped
1-2%. Just Scan turns off this cropping and
shows the complete video.

Notes: If there is noise on the edges of the original
signal, it will be visible when Just Scan is activated.

JJuu sstt SScc aa nn

operates only with
DTV/CADTV/HDMI-DTV/DVI-DTV
(720p/1080i), Component(720p/1080i) input
sources.

PICTURE CONTROL

61

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

PRESET PICTURE SETTINGS (PICTURE MODE)

There are factory presets for picture settings available in the user menus. You can use a preset, change each
setting manually, , or use the Intelligent Sensor.

Select

PPII CCTTUURREE

.

Select

IInntteelllliiggeenntt SSeennssoorr, VV ii vv iidd

,

SSttaannddaarrdd, NNaa tt uurraall, CCii nnee mmaa, SSppoorrtt

or

GGaammee

.

1

MENU

3

ENTER

Select

PPiicc tt uurree MMooddee

.

2

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

■

When selecting

IInn tt eellll iigg eenn tt SS eenn ssoorr

is

changed to

AA uuttoo

automatically.

■

When selecting

IInn tt eellll iigg eenn tt SSee nnss oo rr

, it
is changed contrast, brightness, sharp­ness, color and tint automatically.

■

VV ii vviidd, SSttaann dd aa rrdd, NNaattuu rraall, CC iinn eemmaa

,

SSppoorr tt

, and

GGaammee

Settings are preset
for the optimum picture quality at the
factory.

■

IInn tt eellll iigg eenn tt SSeenn ssoorr

: The most suitable
picture is automatically adjusted accord­ing to the surrounding conditions.

■

VV ii vviidd

: This is the mode to maximize the
effect of the video in the retail store.
Strengthen the contrast, brightness,
color and sharpness for vivid picture.

■

SSttaann dd aa rrdd

: This is the mode to realize
optimum viewing condition for the gen­eral user.

■

NNaattuu rraall

: This is the mode to display the

most natural screen status.

■

CC iinn eemmaa

: This mode optimizes video for

watching movies.

■

SSpp oorr tt

: This is the video mode to
emphasize dynamic video and primary
color (e.g, white, uniform, grass, sky blue
etc.) by realizing the optimal screen for
sports.

■

GGaammee

: This is the mode to realize fast

response speed in a fast gaming screen.

RG

RG

Intelligent Sensor

Vivid

Standard

Natural

Cinema

Sport

Game

PICTURE CONTROL

62

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT - USER MODE

Adjust the picture appearance to suit your preference and viewing situations.
This feature is disable in “

PPii ccttuu rr ee MM ooddee -- II nn tt eell llii ggee nn tt SS eennss oorr

”.

Select

PPII CCTTUURREE

.

Make appropriate adjustments.

Select

BBaacckklliigg hhtt,, CCoonnttrr aasstt,,
BBrrii gghhttnneess ss,, SShhaarr ppnn eessss,, CCoolloorr,,
or

TTiinntt..

1

MENU

Select

PPiicc tt uurree MMooddee

.

2

ENTER

Select

VV ii vv iidd,SSttaannddaarrdd, NNaa tt uurraall

,

CCii nnee mmaa, SSppoorrtt

or

GGaammee

.

3

ENTER 4ENTER 5ENTER

6

RETURN

Return to the previous menu.

Return to TV viewing.

• Back Light 70

EE

EE

EE

EE

Enter

MENU

Enter

Move

PICTURE

E

Aspect Ratio : 16:9

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

■

BB aacc kk ll ii gghhtt

: This function adjusts the
brightness of LCD panel, to control the
brightness of the screen. Adjusting the
backlight is recommended when setting
the brightness of the set. When decreas­ing the backlight, the brightness of the
black becomes darker without any loss in
video signal and the power consumption
is reduced.

■

CC oo nnttrr aasstt

: Increase or decrease the gra­dient of the video signal. You may use
Contrast when the bright part of picture
is saturated.

■

BB rriigg hhttnn eessss

: Adjusts the base level of
the signal in the picture. You may use
Brightness when the dark part of the pic­ture is saturated.

■

SShhaa rrppnneessss

: Adjusts the level of crisp­ness in the edges between the light and
dark areas of the picture. The lower the
level, the softer the image.

■

CC oo ll oo rr

: Adjusts intensity of all colors.

■

TT ii nntt

: Adjusts the balance between red

and green levels.

RG

PICTURE CONTROL

63

PICTURE IMPROVEMENT TECHNOLOGY

You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
You can set the video seeing differently for each input.
To reset to the factory default after making adjustments to each input source, execute the

PPii cc tt uu rr ee RR eess eett

function for each Picture Mode.

Select

PPII CCTTUURREE

.

Select

AAddvvaa nncc eedd CC oo nnttrrooll

.

Select your desired options.

1

MENU

3

2

ENTER

ENTER

5

RETURN

Return to the previous menu.

Return to TV viewing.

Make appropriate adjustments.

4

MENU

Enter

Move

PICTURE

E

Enter

Move

PICTURE

E

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

• Advanced Control

RG

Color Temperature

Medium

Dynamic Contrast

FF

Medium

GG

Dynamic Color

Low

Noise Reduction

Medium

Gamma

Medium

Black Level

Low

Eye Care

Off

Close

Real Cinema

Off

E

RG

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

• Advanced Control

PICTURE CONTROL

64

PICTURE CONTROL

■

Set to warm to enhance hotter colors such as red, or set to cool to enhance cooler
colors such as blue.

■

Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts darker.

■

Adjusts screen colors so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue, green and white look
more vivid.

■

Reduces screen noise without compromising video quality.

Low : Make dark and middle gray level area of the picture brighter.
Medium: Express original picture levels.
High: Make dark and middle gray level area of the picture darker.

■

You can adjust brightness of dark area and middle gray level area of the picture.

Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.

■

Set black level of the screen to proper level.

■

This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M),
HDMI or Component.

■

Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.

■

This feature is disabled in “

PPiiccttuurree MMooddee--IInntteelllliiggeenntt SSeennssoorr, VViivviidd,, CCiinneemmaa

”.

■

Makes video clips recorded in film look more natural by eliminating judder effect.

Dynamic Contrast

Dynamic Color

Noise Reduction

Gamma

Black Level

Eye Care

Real Cinema

Color Temperature

Standard: Displays standard set of colors.
Wide: Increase number of colors used.

■

Maximize the utilization of color to increase color quality.

Color Gamut

PICTURE CONTROL

65

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

Enter

Move

PICTURE

E

Enter

Move

PICTURE

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

E

Select

PPII CCTTUURREE

.

Select

PPiicc tt uurree RR eessee tt

.

Initialize the adjusted value.

1

MENU

2

ENTER

Select

YY ee ss

.

3

ENTER

5

MENU

Return to TV viewing.

4

ENTER

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Color 60

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

RG

No

Ye s

All picture settings will be resetted.
Continue?

?

RG

Resetting video configuration...

ii

PICTURE CONTROL

66

PICTURE CONTROL

DEMO MODE

Select

OO PP TTIIOONN

.

Select

DDeemmoo MM oo dd ee

.

1

MENU

2

ENTER

Select

OO nn

to show the various

feature of the TV.

3

ENTER

4

MENU

Return to TV viewing.
After a while,

DDeemmoo MM oo dd ee

starts.

If you want to stop the demo, press any button
(Except VOL +, - and MUTE button).

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Off

On

Displays a slide show to explain the various feature of this TV.

SOUND & LANGUAGE CONTROL

67

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a
regular TV program.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed every
time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic
adjustments for each program.

Select

AA UUDD IIOO

.

Select

AAuuttoo VV oo lluu mm ee

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

AUDIO

E

LR

-+

Enter

Move

AUDIO

E

LR

-+

Auto Volume : On

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : Off

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Off

On

SOUND & LANGUAGE CONTROL

68

SOUND &LANGUAGE CONTROL

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate
sound options based on the program content.

SOUND &LANGUAGE CONTROL

Select

AA UUDD IIOO

.

Select

SSoouunndd MMooddee

.

1

MENU

2

ENTER

Select

SSttaann dd aa rrdd, MMuu ssii cc

,

CC iinn eemmaa, SSppoorr tt

, or

GGaammee

.

3

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Standard

Music

Cinema

Sport

Game

-+ -+

■

SSttaann dd aa rrdd, MMuu ssii cc, CC iinn eemmaa, SSppoorr tt

,

and

GGaa mm ee

are preset for optimum

sound quality at the factory.

■

SStt aa nn dd aa rr dd

: Offers standard-quality

sound.

■

MMuu ssii cc

: Optimizes sound for listening to

music.

■

CC iinn eemmaa

: Optimizes sound for watching

movies.

■

SSppoorr tt

: Optimizes sound for watching

sports events.

■

GGaa mm ee

: Optimizes sound for playing

games.

SOUND & LANGUAGE CONTROL

69

SOUND SETTING ADJUSTMENT - USER MODE

Adjust the sound to suit your taste and room situations.

Select

AA UUDD IIOO

.

Select

SSoouunndd MMooddee

.

Select

TT rreebbllee

or

BB aa ssss

.

1

MENU

4

2

ENTER

Select

SSttaann dd aa rrdd, MMuu ssii cc

,

CC iinn eemmaa, SSppoorr tt

, or

GGaammee

.

3

ENTER

ENTER

Make appropriate adjustments.

5

ENTER

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Close

EE

EE

• Treble 50

• Bass 50

•

SRS TruSurround XT

Off

-+ -+

SOUND & LANGUAGE CONTROL

70

SOUND &LANGUAGE CONTROL

SRS TRUSURROUND XT / INFINITE SOUND

Select

AA UUDD IIOO

.

Select

SSRRSS TTrruu SSuurr rroouunn dd XX TT

or

IInn ff ii nnii ttee SS oo uunndd

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog
clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experi­ence from standard stereo material.

■

If sound quality or volume is not at the
level you want, it is recommended to use a
separate home theater system or amp to
cope with different user environments.

■

If you select “

CC ll eeaarr VVooii cc ee IIII-- OOnn

”,

SSRRSS

TTrruuSS uurrrr oo uunndd XXTT

feature will not work.

■

SSRR SS TTrruuSSuurrrr oouunndd XXTT

: TruSurround XT
is a patented SRS technology that solves
the problem of playing 5.1 multichannel
content over two speakers.

■

IInn ff ii nniittee SSoouunndd

: Infinite Sound is a
patented LG proprietary sound process­ing technology that strives immersive 5.1
surround sound with just two front speak­ers. (For 32/37/42/47/55LD650H,
32/37/42LD655H)

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Close

• Treble 50

• Bass 50

•

SRS TruSurround XT

Off

-+ -+

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound:

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound:

Off

• Treble 50

• Bass 50

Close

• Treble 50

• Bass 50

•

Infinite Sound

Off

-+ -+

32/37/42LG710H

32/37/42/47/55LD650H, 32/37/42LD655H

SOUND & LANGUAGE CONTROL

71

CLEAR VOICE II

By differentiating the human sound range from others, it improves the sound quality of voices.

Enter

Move

AUDIO

E

LR

Enter

Move

AUDIO

E

LR

Auto Volume : Off

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Auto Volume : Off

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

-+ -+

Off

On

Select

AA UUDD IIOO

.

Select

CC ll eeaarr VVooiiccee IIII

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Select

LLeevv ee ll

.

4

ENTER

Make appropriate adjustments.

5

ENTER

Adjustment for Clear Voice ll Level
With selecting

OO nn

SOUND & LANGUAGE CONTROL

72

SOUND &LANGUAGE CONTROL

BALANCE

Select

AA UUDD IIOO

.

Select

BB aall aannccee

.

Make appropriate adjustments.

1

MENU

3

2

ENTER

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

AUDIO

Enter

Move

AUDIO

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

LR

E

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

Close

EE

EE

Balance 0

LR

-+

-+

SOUND & LANGUAGE CONTROL

73

TV SPEAKERS ON/OFF SETUP

If you wish to use an external Hi-Fi system or a SRS System, turn off the TV’s internal speakers.
In

AA VV, CCoomm pp oonn eenntt, RR GGBB

and

HHDDMMII

with HDMI to DVI cable, the TV speaker can be operational even when

there is no video signal.
Turn the TV speakers off if using external audio equipment.

Select

AA UUDD IIOO

.

Select

TTVV SSppee aa kk eerr

.

Select

OO nn

or

OO ff ff

.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

LR

Off

On

-+ -+

SOUND & LANGUAGE CONTROL

74

SOUND &LANGUAGE CONTROL

E

AUDIO RESET

Settings of the selected Sound Mode return to the default factory settings.

Select

AA UUDD IIOO

.

Select

RR eesseett

.

1

MENU

2

ENTER

Initialize the adjusted value.

3

ENTER

MENU

Return to TV viewing.

4

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

LR

Enter

Move

AUDIO

E

• Level 3

Balance 0

Sound Mode : Standard

•

SRS TruSurround XT:

Off

• Treble 50

• Bass 50

• Reset

LR

Resetting audio configuration...

ii

-+

-+

E

SOUND & LANGUAGE CONTROL

75

Each time you press the

SSAAPP

button,

MMoonn oo, SStteerr eeoo

, or

SSAAPP

appear in turn.

Return to TV viewing.

1

SAP

2

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom­panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used
if the broadcast is only in Mono.
If other languages are available on the digital signal,select them with the

SSAAPP

button.

RETURN

MONO SAPSTEREO

SOUND & LANGUAGE CONTROL

76

SOUND &LANGUAGE CONTROL

AUDIO LANGUAGE

Other languages may be available if a digital signal is provided by the broadcasting station.
This feature operates only in DTV mode.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

English

Spanish

French

Select

OO PP TTIIOONN

.

Select

AAuuddiioo LLaann gguuaaggee

.

Select your desired language.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

77

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

English

Español

Français

Select

OO PP TTIIOONN

.

Select

MMee nnuu LLaanngguuaagg ee

.

Select your desired language.
From this point on, the on-screen menus will

be shown in the selected language.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

SOUND & LANGUAGE CONTROL

78

SOUND &LANGUAGE CONTROL

CAPTION MODE

Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying captioning
information if provided on a program. Analog caption displays information at any position on the screen and is
usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital
and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which
was last set when you turned the power off. This function is only available when

CCaappttiioonn

Mode is set

OO nn

.

Select

OO PP TTIIOONN

.

Select

CC aapptt iioonn

.

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC CC11-44

or

TT eexxtt11-44

.

4

Analog Broadcasting System Captions

■

When selecting

OO ff ff

, Sub-menus for
Analog, DTV, and Digital Option become
disabled.

■

CC AA PPTT IIOO NN

The term for the words that scroll
across the bottom of the TV screen;
usually the audio portion of the pro­gram provided for the hearing impaired.

■

TT EEXXTT

The term for the words that appear in a
large black frame and almost cover the
entire screen; usually messages provid­ed by the broadcaster.

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Menu Language : English

Audio Language : English

Caption : CC1

Set ID : 1

Demo Mode : Off

Data Broadcasting

Mode

CC1

Close

Digital Option

FF

On

GG

SOUND & LANGUAGE CONTROL

79

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in.
Other Languages can be chosen for digital sources only if they are included on the program.
This function in only available when Caption Mode is set On.

Select

OO PP TTIIOONN

.

Select

CC aapptt iioonn

.

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC CC11-44, TT eexxtt11-44

, or

SSee rrvv iicc ee11- 66

.

4

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Menu Language : English

Audio Language : English

Caption : CC1

Set ID : 1

Demo Mode : Off

Data Broadcasting

Mode

CC1

Close

Digital Option

FF

On

GG

SOUND & LANGUAGE CONTROL

80

SOUND &LANGUAGE CONTROL

Customize the DTV captions that appear on your screen.
This function in only available when Caption Mode is set On.

Caption Option

Select

OO PP TTIIOONN

.

Select

CC aapptt iioonn

.

Select

OO nn

.

1

MENU

3

2

ENTER

ENTER

Select

CC uuss ttoo mm

.

5

ENTER

Customize the

SSiizzee, FF oonntt

, etc., to your
preference. A preview icon is provided at
the bottom of the screen, use it to see the
caption language.

6

Select

DDiigg iitt aall OOppttiioonn

.

4

■

SSiizzee

: Set the word size.

■

FF oonntt

: Select a typeface for the text.

■

TTeexxtt CC oo ll oo rr

: Choose a color for the

text.

■

TTeexxtt OOppaacc ii tt yy

: Specify the opacity

for the text color.

■

BB gg (( BBaacc kk ggrr oouunndd)) CC oo lloorr

: Select a

background color.

■

BB gg (( BBaacc kkggrr oouunndd)) OO pp aacc ii tt yy

: Select

the opacity for the background color.

■

EEddggee TTyy pp ee

: Select an edge type.

■

EEddgg ee CCooll oorr

: Select a color for the

edges.

7

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Size

A Standard

Font

Font 1

Text Color

White

Text Opacity

Solid

Edge Type

None

Edge Color

Black

Bg Color

Black

Bg Opacity

Solid

Close

FF

Custom

GG

Enter

Move

OPTION

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Menu Language : English

Audio Language : English

Caption : Off

Set ID : 1

Demo Mode : Off

Data Broadcasting

Mode

CC1

Close

Digital Option

On

TIME SETTING

81

TIME SETTING

CLOCK SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal.
The digital channel signal includes information for the current time provided by the broadcasting station.
Set the clock manually if the current time is set incorrectly by the auto clock function.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Month

Date

21

Year

2009

Hour

10 AM

02

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

FF

Auto

GG

Select

TT IIMMEE

.

Select

CC lloo cckk

.

Select

AA uuttoo

.

1

MENU

3

2

ENTER

ENTER

Select your viewing area time zone.

• U.S.A:

EEaasstteerrnn, CC eennttrr aall, MMoouunn tt aaii nn

,

PPaaccii ff ii cc, AAll aasskkaa

, or

HHaawwaa iiii

.

• Canada:

EEaasstteerrnn, CC eennttrr aall, MMoouunn tt aaii nn

,

PPaaccii ff ii cc, NNee ww FF ..llaanndd

, or

AAtt ll aann ttii cc

.

4

Select

AA uuttoo, OO ff ff

, or

OO nn

(depending on
whether or not your viewing area observes
Daylight Saving time).

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

TIME SETTING

82

TIME SETTINGTIME SETTING

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Select

TT IIMMEE

.

Select

CC lloo cckk

.

Select

MMaann uuaall

.

1

MENU

3

2

ENTER

ENTER

Select the Year, Month, Date, Hour, or Minutes
option.

4

Set the Year, Month, Date, Hour, or Minutes
option.

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Month

Date

21

Year

2009

Hour

10 AM

02

Minute

10

Time Zone

Eastern

Daylight
Saving

Auto

Close

FF

Manual

GG

TIME SETTING

83

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set.
The

OOffff TT ii mmee

function overrides the

OOnn TT iimmee

function if they are both set to the same time.

The TV must be in standby mode for the

OOnn TT iimmee

to work.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : 6:30 AM (Once)

Sleep Timer : Off

Select

TT IIMMEE

.

Select

OOff ff TT iimmee

or

OO nn TT ii mm ee

.

Select

RR eeppeeaa tt

.

1

MENU

3

2

ENTER

ENTER

Select

OO ff ff, OO nnccee, DDaaii ll yy, MMoonn ..~FF rrii ..

,

MMoonn ..~SSaatt .., SSaatt ..~ SSuu nn..

, or

SSuu nn..

.

4

Select and set

HHoouu rr

or

MMiinn uuttee

.

5

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Repeat

FF

Once

GG

Hour

6 AM

Minute

30

Close

Feb. 21, 2009 10:10 AM

TIME SETTING

84

TIME SETTINGTIME SETTING

SLEEP TIMER SETTING

The Sleep Timer turns the TV off at the preset time.
Note that this setting is cleared when the TV is turned off.

■

To cancel the

SSlleeeepp TTii mm eerr

, select

OO ff ff

.

■

Press the

SSLL EEEE PP

button repeatedly to

select the number of minutes.

Enter

Move

TIME

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Select

TT IIMMEE

.

Select

SSlleeeepp TTii mm eerr

.

Make appropriate adjustments.

1

MENU

3

2

ENTER

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Off

10 min.

20 min.

30 min.

60 min.

90 min.

120 min.

180 min.

240 min.

PARENTAL CONTROL / RATINGS

PARENTAL CONTROL / RATING

85

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad­casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the
type of the program and the categories. It is also possible to block all program viewing for a time period. To use
this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be
blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to­video movies use the Movie Rating System (MPAA)only.

Ratings for Television programs including made-for-TV movies :

■

TV-G(General audience

)

■

TV-PG(Parental guidance suggested

)

■

TV-14(Parents strongly cautioned

)

■

TV-MA (Mature audience only

)

■

TV-Y(All children

)

■

TV-Y7(Children 7 years older

)

SET PASSWORD & LOCK SYSTEM

Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.

Setting up Your Password

Close

Enter Password

* * * *

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

■

When you select

OO nn

, the Lock System

is enable.

■

The TV is set up with the initial pass­word “0-0-0-0”.

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

PARENTAL CONTROL / RATING

86

PARENTAL CONTROL /RATINGS

Enables or disables the blocking scheme you set up previously.

Lock System

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

LLoocckk SSyyssttee mm

.

Select

OO nn

or

OO ff ff

.

3

2

ENTER

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

On

■

When you select

OO nn

, the Lock System

is enable.

Select

LLOOCC KK

.

1

MENU

ENTER

4

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

87

Set up blocking schemes to block specific channels, ratings, and external viewing sources.
A password is required to gain access to this menu.

Set Password

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

SSee tt PP aassss ww oo rrdd

.

Choose any 4 digits for your new password.
As soon as the 4 digits are entered, re-enter

the same 4 digits on the

CC oo nnffiirrmm

.

4

3

ENTER

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

New

* * * *

Confirm

* * * *

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

88

PARENTAL CONTROL /RATINGS

CHANNEL BLOCKING

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

BB lloocckk CChh aann nneell

.

Select a channel to block or unblock.

4

3

ENTER

Block or unblock a channel.

5

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Ch. Change

Page Change

CH

Navigation

Previous

Block/Unblock

PARENTAL CONTROL / RATING

89

MOVIE & TV RATING

Movie Rating (MPAA)

-

For USA

Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can
set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that
the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Select

MMoovviiee RR aattiinngg

.

Select GG,

PP GG, PPGG-- 11 33, RR, NNCC --1177

,

XX

, or

BBlloocckkiinn gg OOffff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Blocking off : Permits all programs

G

PG

PG-13

R

NC-17

X

Blocking Off

■

G (General audience)

■

PG (Parental guidance suggested)

■

PG-13 (Parents strongly cautioned)

■

R (Restricted)

■

NC-17 (No one 17 and under admitted)

■

X (Adult only)

■

Blocking Off (Permits all programs)

GG

If you set PG-13: G and PG movies will
be available, PG-13, R, NC-17 and X will
be blocked.

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Select

TTVV RRaattii nngg--CChhiill ddrree nn

.

Select

AA ggee

or

FF aann tt aassyy VViioolleenncc ee

.

4

3

ENTER

Select block options.

5

ENTER

■

Age (applies to TV-Y, TV-Y7)

■

Fantasy Violence (applies to TV-Y7)

TV Rating Children

-

For USA

Prevents children from watching certain children's TV programs, according to the ratings limit set. The children
rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi­ences in the TV Rating - sub menu, your children can view those programs.

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

Age

Fantasy Violence

PARENTAL CONTROL / RATING

90

PARENTAL CONTROL /RATINGS

PARENTAL CONTROL / RATING

91

TV Rating General

-

For USA

Based on the ratings, blocks certain TV programs that you and your family do not want to view.

Select

AA ggee, DDiiaa lloogguu ee, LLaann gguu aa ggee

,

SSeexx

or

VV iioolleenn cc ee

.

4

3

ENTER

Select block options.

5

■

Age (applies to TV-G,TV-PG,TV-14,TV­MA).

■

Dialogue-sexual dialogue (applies to
TV-PG,TV-14).

■

Language-adult language (applies to
TV-PG, TV-14, TV-MA).

■

Sex-sexual situations (applies to TV-PG,
TV-14, TV-MA).

■

Violence (applies to TV-PG, TV-14, TV­MA).

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Select

TTVV RRaattii nngg--GGeenneerr aall

.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

Age

Dialogue

Language

Sex

Violence

PARENTAL CONTROL / RATING

92

PARENTAL CONTROL /RATINGS

TV Rating English

-

For CANADA

Selecting Canadian English rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TTVV RRaattii nngg--EE nngglliisshh

.

Select EE, CC,

CC 88 ++, GG, PPGG

,

1144 ++, 1188 ++

, or

BBlloocckkiinn gg OO ffff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

C

C8+

G

PG

14+

18+

Blocking Off

■

If

TTVV RRaatt iinn gg--EE nngglliisshh

or

TTVV RRaa tt iinngg--

FF rreenn cc hh

is locked, enter the password

to unlocked it temporarily.

■

E (Exempt)

■

C (Children)

■

C8+ (Children eight years and older)

■

G (General programming, suitable for
all audiences)

■

PG (Parental Guidance)

■

14+ (Viewers 14 years and older)

■

18+ (Adult programming)

■

Blocking Off (Permits all programs)

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

93

TV Rating French

-

For CANADA

Selecting Canadian French rating system.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Select

TTVV RRaattii nngg--FFrr eenncc hh

.

Select EE, GG,

88aann ss++, 1133aa nnss++

,
1166aa nnss++, 1188aa nnss++

, or

BB lloocckkii nngg ooff ff

.

4

3

ENTER

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Blocking off : Permits all programs

E

G

8ans+

13ans+

16ans+

18ans+

Blocking Off

■

E (Exempt)

■

G (General)

■

8ans+ (General-Not convenient for lit­tle children)

■

13ans+ (Not convenient for children of
13 years and younger)

■

16ans+ (Not convenient for children of
16 years and younger)

■

18ans+ (This programs is only for
adults)

■

Blocking off (Permits all programs)

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

1

456

7809

23

5

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

PARENTAL CONTROL / RATING

94

PARENTAL CONTROL /RATINGS

DOWNLOADABLE RATING

This function is available only for digital channels.
This function operates only when TV has received Region5 Rating data.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Close

E

E

Select

DDoowwnnllooaaddaabbllee RR aattii nngg

.

Select desired

DDoowwnnll ooaaddaabbll ee

RR aatt ii nngg

option.

4

3

ENTER

Select desired option and block it.

5

ENTER

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

■

Based on rating table, your TV's OSD
(On Screen Display) may differ slightly
from what is shown in this manual.

Humor

Sport

Cruelty

Language

Sadness

Genre

Age

Humor

PARENTAL CONTROL / RATING

95

EXTERNAL INPUT BLOCKING

Enables you to block an input.

Select

IInn pp uutt BBlloocc kk

.

Select input source.

4

3

Select

OO nn

or

OO ff ff

.

5

ENTER

Select

LLOOCC KK

.

1

MENU

ENTER

Input the password.

2

123

456

7809

ABC

DEF

GHI

WXYZ

TUV

PQRS

MNO

JKL

&@

.:/,

6

RETURN

Return to the previous menu.

MENU

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

AV1

FF

Off

GG

AV2

Off

Component

Off

HDMI1

Off

RGB-PC

Off

Close

HDMI2

Off

COMMERCIAL MODE SETUP

COMMERCIAL MODE SETUP

96

INTERACTIVE TV SETUP

Channel Guide

Hotel Information

Help

Exit

PPV GEM-TV Setup

1. Make all connections as required of PPV system.

2. Set TV to default condition.

3. Configure all relevant installer menu items and TV features.

4. Install PPV card. In most cases the PPV card is preprogrammed with the PPV
provider master TV setup.

GEM-TV Setup Without PPV Card

Refer to Commercial Mode Setup on page 98.

1. See installer menu pages and make settings as required for Gem operation.

2. Specify a Gem Start Channel for item 119 that will tell the TV which channel
to tune in for Gem operation.

3. Set TV features on TV Channel, Picture, Audio etc. menus as indicated on
page 98.

Gem Operation Interactive Menu Features

Use the Gem remote provided in the room to operate both interactive menu and
the regular TV features.

Channel Guide

Shows available TV programs. Indicates channel, program start and finish time
and identifies the TV network.

Hotel Information

Shows typical hotel information. Such as photos of Guestroom, Dining, Business
Center, Fitness, Pool, and Facility. And any contributing Partners such as local
schools in co-operation programs with the lodge.

Help

Provides help for the interactive menus.

Exit

Removes the interactive menu from the screen.

Note: The TV clock must be set before Gem data can be downloaded.

1

2

3

4

5

6

7

8

9

0

ABC

DEF

GHI

JKL MNO

PQRS

TUV

WXYZ

PIP CH-

PIP CH+

PIP SWAP

PIP INPUT

PIP

SAP

FLASHBK

REMOVE

ALPHA/NUM

P
A
G
E

MUTE

TIMER

MENU

RETURN

VOL

CH

POWER

GUIDE

INPUT

CC

ENTER

TV

DVD

VCR

STB

&@

.:/,

RATIO

PORTAL

INFO

i

COMMERCIAL MODE SETUP

97

INSTALLER OVERVIEW

Operating Installer Menu

To set up the controls for the TV you will need to know how to
enter the TV Installer menu and make changes to the default val­ues as required. If necessary, familiarize yourself with the TV
Installer menu and how to make and save changes in the menu.

LG Installer Remote

You will need an

LLGG IInn ssttaall ll eerr rreemmoottee

control similar to the one
shown to the right. The installer remote must have a “Source” but­ton or its equivalent. The remote shown in this manual has
“INPUT” -- this button serves the purpose of a Source button.

The TV’s clonable features need to be set up. This is a critical
step. If the Master TV display panel’s clonable features like adding
channel icons or channel labels are not done correctly, then all the
cloned TVs will have problems. Refer to the Owner’s Manual for
other TV features: Video, Audio, Closed captions, V-Chip, etc.

TLL-1100A Clone Programmer

The TLL is a very simple cloner to use. It can be set up to clone a
master TV setup and transfer it into a target TV. Cloning is accom­plished using the TV/Cloner MPI ports for communication. Be sure

the Master TV is set up completely. Cloning is only
possible when the TV is tuned to an Analog chan­nel, not a digital channel.

Typical Installer Menu

TV Link
Loader-Demo

TLL1100A
Ready

TLL1100A

ENTER

RECEIVE SEND

MENU

MODE

000 INSTALLER SEQ 000

UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00

GEM PTC INSTALLER MENU

1

2

3

4

5

6

7

8

9

0

ABC

DEF

GHI

JKL MNO

PQRS

TUV

WXYZ

PIP CH-

PIP CH+

PIP SWAP

PIP INPUT

PIP

SAP

FLASHBK

REMOVE

ALPHA/NUM

P
A
G
E

MUTE

TIMER

MENU

RETURN

VOL

CH

POWER

GUIDE

INPUT

CC

ENTER

TV

DVD

VCR

STB

&@

.:/,

RATIO

PORTAL

INFO

i

COMMERCIAL MODE SETUP

98

COMMERCIAL MODE SETUP

INTERACTIVE TV OVERVIEW

Through the interactive TV, the lodging guest is offered a more complete
venue of lodge services and amenities. Using the TV in the comfort of the
hotel room, the guest can browse the lodge resources available and make
selections quickly. Charges for these offerings are billed at the time of order.
The Prp:Centric TV is connected to the lodge’s billing computer.
After the interactive TV is installed, the following hotel and other resources
may be available to the hotel guest, assuming that they are provided by the
lodge.

Interactive Amenities may include the following

■

Hotel Information, News and Events.

■

Directory Services, (Tourist attractions, Restaurants, etc.)

■

Reservation Service (Business Meetings, Fitness, SPA, etc.)

■

Weather, Traffic Information.

■

Shopping Services (Delivery to Guest Room)

■

Room Service (Menu Ordering, Memo Service, Morning Wake Up Call, Laundry, etc.)

■

Ticketing Services.

■

Check Out Service (in the Guest Room).

■

Gaming Services.

■

Email resources, guest can access an email account, etc.

■

Other offerings as they become available.....

Channel Guide

Hotel Information

Help

Exit

Pro:Centric Interactive TV
Notes
PPrroo::CCeenn tt rrii cc -- TTVV SSeettuupp ff oo rr
PPPPVV (( PPaa yy--ppeerr-- vvii eeww))
OOpp eerraattiioonn
A PPV card usually has a chan­nel lineup included with the
master TV setup. If this is the
case, reset TV to default con­dition, set any TV features and
installer menu items as
required and then insert the
PPV pre-programmed card into
the MPI slot.

■

After TV setup, remove the AC
power cord for 15 seconds.

IImmppoorr tt aann tt!!

■

The TV will take a few minutes
to load electronic program
information. If enough time
has not elapsed for the TV to
acquire EPG data, the TV may
operate erratically; menus
may not work or TV will not
respond to IR remote key
presses.

COMMERCIAL MODE SETUP

99

COMMERCIAL MODE SETUP FOR MASTER TV

NNoott ee 11

: Disconnect all Aux inputs. Under certain conditions, Auto

Tuning (Channel search) is disabled if there is an Aux input active.

Commercial Mode Setup Procedure

1. Set Installer Menu Items

(Enter TV Installer Menu, see Installer menus for detailed instructions.)
a. Set Installer menu item

111177 FFAACCTT DDEEFFAAUULLTT

,to

0000 11

and press

EENNTTEERR

on Installer remote. (This clears all installer menu custom
settings, channel labels / icons etc. and reloads the factory default
settings.)

b. Set Item

000033 BBAANNDD // AAFFCC

.

-

BB rrooaaddcc aa sstt

: set to

0000 00

.-

HHRRCC

: set to

0000 22

-

CC AATT VV

: set to

0000 11

.-

IIRRCC

: set to

0000 33

c. Set item

002288 CCHH OOVVEERRIIDDEE

to

0000 11

. This allows access to chan­nel search, Auto Tuning and Channel List/Edit options in the
Channel Menu.

d. Set other particular installer items that affect your TV programming

network. Enable/Disable Aux sources, set a

GGeemm SSttaarrtt CChhaannnneell

etc.

e. After all required installer menu item settings have been adjusted,

press ENTER on the remote to remove Installer Menu.

2. Set Up TV Features

(Channel, Picture, Audio, Lock, Time, Option, Digital Captions etc.
See TV Clonable options list and TV menus pages.)

3. Run Auto Tuning (Channel Search)

(Search for all available channels.) Go to the Channel menu and
access the Auto Tuning option, follow onscreen instructions.
a. Edit Channel Scan. In the Channel Menu, access Channel Edit
option.

■

Add/Delete channels per your system requirements.
Note: Physical channel numbers are used to identify Virtual channels.

■

Add familiar channel trademarks/logos like ABC, CBS, NBC etc. to
the Channel-Time onscreen display. In the Channel menu, select the
Channel Label option. Add identifiable labels (logos) for the end
user to readily know what common networks are available.

4. Transfer TV Setup to Internal TV Controller: 2-5-5 + Menu Mode

After the TV channel scan has been edited and channel label icons
added, enter the Installer menu. Once in the Installer menu, press 2-5­5 and MENU on the remote. This transfers the TV setup to the inter­nal controller box.

5 . Add Custom Channel Labels for Analog Channels: 2-5-4 + Menu Mode

Enter Installer menu, press 2-5-4 and MENU. Add your own custom
text labels to channel onscreen displays. Note: Digital Channels often
have a broadcaster generated label. (See 2-5-4+Menu pages.)
When finished, to exit 2-5-4+Menu mode, press

MMEENN UU

.

Verify TV Setup

At this point, verify that the channel lineup, channel icons and custom
labels are correct. Make sure the TV features are set per your require­ments. Set item

002288 CChh OOvv eerriiddee

to

0000 00

to lock the channel scan.
After the preceding has been completed, the Master TV setup is ready
to be copied to a Clone Programmer, see cloning options pages.

003 BAND/AFC 00X

028 CH. OVERIDE 001

117 FACT DEFAULT 00X

Typical TV Installer Menu

Adjust the settings for

these Installer Menu Items

DIGITAL 19-3

WXYZ

MONO

STEREO SAP

Custom Text Label ‘WXYZ’ created in

2-5-4 + Menu (Add Channel Label)

Mode

028 CH. OVERIDE 000

After Master TV setup has been

completed, set item 028 Ch

Overide to 000.

000 INSTALLER SEQ 000

UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00

xxLG710H PTC INSTALLER MENU

093 RJP AVAILABLE 001

Set 093 RJP Available to 001 if

using a remote jack pack

This page provides an overview of a Master TV configuration.

000 INSTALLER SEQ 000

UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00

xxLD650H PTC INSTALLER MENU

For 32/37/42LG710H

For 32/37/42/47/55LD650H

000 INSTALLER SEQ 000

UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00

xxLD655H PTC INSTALLER MENU

For 32/37/42LD655H

COMMERCIAL MODE SETUP

100

COMMERCIAL MODE SETUP

On Master TV, Create Profile and Learn

1. Set up all Master TV features on the menus and do
a Channel Search. Add Channel and Aux Labels etc.
Do 255+menu on Installer Menu to save current TV
into flash memory.

2. Plug a USB memory drive into the USB In port on
the master TV.

3. Press the Menu key to open the Main menu.
Highlight the Option icon.

4. Press the Left arrow key once, the Option icon on
left side of menu will be highlighted.

5. Press number key ‘7’ a total of 7 times.

6. Gain access to “Learn From TV”.
A. First, the Expert Download Menu page will not
show the “Learn From TV” option. In order to make
it available, key in the password which is used to

enter Installer Menu. Example 9-8-7-6.
B. By pressing the up/down arrow keys(if there are
other menus), place the cursor on Learn From TV,
then press the Enter Key.

7. Using the Up/Down arrow keys, highlight “Learn
From TV” and then press Enter.

8. To identify this profile from others, you can change
the last 5 digits. Key in a custom file name and
then press the Enter key.

9. The Learning status will be shown in the progress
bar. As soon as learning is complete, a message will
appear on the screen indicating the learning process
is done.

10. Remove the USB memory card.

NOTES

!

GG

Do not remove TV power cord or USB memory
card while Learning, doing so might harm your
USB memory card.

GG

Do not remove TV power cord or USB memory
card while Teaching, doing so may cause the TV
to malfunction.

GG

You are allowed to edit the file name, however, a
file with edited contents will not be recognized.

GG

Since clock data is copied into USB memory card
as numeric data, the time difference between
teaching and learning is not automatically adjust­ed. Either set the clock manually, or use Auto
Clock set on TV main menu.

Optional: Edit/Change File Name

If necessary, the file name can be edited or changed.

MASTER TV PROFILE SETUP LEARNING/TEACHING WITH USB
MEMORY CARD

USB Download Menu

Upgrade TV Software

Upgrade TV Software

Teach To TV

Learn From TV

Learn From TV

Learn From TV

xxLG710H-UA00001.TLL

Select the file name and press OK to start

E

E

Previous Enter

UPGRADING...

100%

Do not unplug!

!!

Learn From TV

Learn From TV

xxLD650H-UA00001.TLL

Select the file name and press OK to start

E

E

Previous Enter

For 32/37/42LG710H

For 32/37/42/47/55LD650H

For 32/37/42LD655H

Learn From TV

xxLD655H-UA00001.TLL

Select the file name and press OK to start

E

E

Previous Enter