OWNER’S MANUAL
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
LA62**
LA64**
LA66**
LA69**
LA74**
LN57**
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
TABLE OF CONTENTS
3 |
SAFETY INSTRUCTIONS |
35 SPECIFICATIONS |
|
8 |
Viewing 3D Imaging (Only 3D models) |
|
|
9 INSTALLATION PROCEDURE
9 ASSEMBLING AND PREPARING
9 Unpacking
13Separate purchase
14Parts and buttons
15Lifting and moving the TV
16Setting up the TV
16 - Attaching the stand
18 Mounting on a table
21Mounting on a wall
22Tidying cables
23MAKING CONNECTIONS
23Antenna connection
24HDMI connection
24DVI to HDMI connection
25Component connection
25Composite connection
26Audio connection
26- Digital optical audio connection
26Headphone connection
27USB connection
27MHL connection
28REMOTE CONTROL
30MAGIC REMOTE CONTROL FUNCTIONS
31Registering Magic Remote Control
31 How to use Magic Remote Control
31Precautions to Take when Using the Magic
Remote Control
32USING THE USER GUIDE
33MAINTENANCE
33 Cleaning your TV
33 - Screen, frame, cabinet and stand
33 Power cord
33TROUBLESHOOTING
34ENVIRON MENTAL INFORMATION
34 WEEE
44 LICENSES
44 OPEN SOURCE SOFTWARE NOTICE
44EXTERNAL CONTROL DEVICE SETUP
WARNING
yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
yy If you ignore the caution message, you may be slightly injured or the product may be damaged.
NOTE
yy The note helps you understand and use the product safely. Please read the note carefully before using the product.
SAFETY INSTRUCTIONS 3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and remote control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
yyDo not place the product where it might be exposed to dust.
This may cause a fire hazard.
yyMains plug is the disconnecting device. The plug must remain readily operable.
yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture.
yyMake sure to connect the power cable to the grounded current. (Except for devices which are not grounded.)
You may be electrocuted or injured.
yyInsert the power cable completely into wall socket. If the power cable is not inserted completely into wall socket, a fire could break out.
yyEnsure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.
yyDo not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
yyBend antenna cable between inside and outside building to prevent rain from flowing in.
This may cause water damaged inside the Product and could give an electric shock.
yyWhen mounting a TV on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.
It may cause fire, electric shock.
yyDo not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
yyDo not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 SAFETY INSTRUCTIONS
Desiccant
yyKeep the packing antimoisture material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep
it out of the reach of children.
yyDo not let your children climb or cling onto the TV. Otherwise, the TV may
fall over, which may cause serious injury.
yyDispose of used batteries carefully to protect a child from eating them.
Please seek DoctorMedical
Attention immediately if child consumes batteries.
yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall
Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
You may be electrocuted. (Depending on model)
yyDo not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the inflammable substances.
yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
yyDo not spray water on the product or scrub with an inflammable substance
(thinner or benzene). Fire or electric shock accident can occur.
yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
You may be injured or the product can be damaged.
yyNever touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.
It may cause a fire or a burn by a spark.
yyDo not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
yyIf any of the following occur, unplug the product
immediately and contact your local service centre.
--The product has been impacted by shock --The product has been
damaged
--Foreign objects have entered the product --The product produced
smoke or a strange smell
This may result in fire or electric shock.
SAFETY INSTRUCTIONS 5
yyIf you don’t intend to use the product for a long time, unplug the power cable from the product.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
yyInstall the product where no radio wave occurs.
yyThere should be enough distance between an outside antenna and power lines
to keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such as unstable shelves or inclined surfaces.
Also avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the product.
yyIf you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
yyIf you intend to mount the product to a wall, attach VESA standard mounting interface
(optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories specified by the manufacturer.
yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician.
This may create a fire hazard or an electric shock hazard.
yyWe recommend that you maintain a distance of at least
2 to 7 times the diagonal screen size when watching
TV.
If you watch TV for a long period of time, this may cause blurred vision.
yyOnly use the specified type of battery.
This could cause damage to the remote control.
yyDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yyBatteries should not be exposed to excessive heat.eg keep away from direct Sunlight , open fireplace and electric heaters.
yyDo not place non-rechargeable batteries in charging device.
yyMake sure there are no objects between the remote control and its sensor.
yySignal from the remote control may be disturbed by sun light or other strong light. In this case, darken the room.
yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
yyDo not turn the product
On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
<![endif]>ENGLISH
<![endif]>ENGLISH
6 SAFETY INSTRUCTIONS
yyPlease follow the installation instructions below to prevent the product from overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation
(e.g., on a bookshelf or in a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
yyTake care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot.
This does not affect the operation or performance of the product.
yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
yyPrevent dust collecting on the power plug pins or outlet. This may cause a fire hazard.
yyProtect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
yyDo not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
yyAvoid touching the screen or holding your finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
yyWhen cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the product and its panel. Otherwise, this may result in fire, electric shock or product damage (deformation, corrosion or breakage).
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.
yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power cord from the power board. As this could be hazards.
yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
yyWhen moving or unpacking the product, work in pairs because the product is heavy.
Otherwise, this may result in injury.
SAFETY INSTRUCTIONS 7
yyContact the service center once a year to clean the internal parts of the product.
Accumulated dust can cause mechanical failure.
yyRefer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
yyIf the product feels cold to the touch, there may be a small
“flicker” when it is turned on. This is normal, there is nothing wrong with product.
yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/ or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also
occurs in third-party products and is not subject to exchange or refund.
yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/top/ down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A
low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 SAFETY INSTRUCTIONS
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for
a long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/ watching 3D contents and get enough rest until the symptom subsides.
-- Consult your doctor when the symptoms persist.
Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
CAUTION
Viewing Environment
Viewing Distance
-Maintain a distance of at least twice the screen diagonal length when watching 3D contents.
If you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
Using modified 3D glasses may cause eye strain or image distortion.
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1Open the package and make sure all the accessories are included.
2Attach the stand to the TV set.
3Connect an external device to the TV set.
4Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty. yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your
TV’s USB port.
|
B |
B |
|
|
< |
10 mm |
|
|
|
||
|
|
*A = |
|
|
|
< |
18 mm |
A |
|
*B = |
|
|
A |
|
<![endif]>ENGLISH
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
Tag On
P
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remote control, |
|
Magic remote control, |
Owner’s manual |
|
Tag on |
|||||||||||
batteries (AAA) |
|
batteries (AA) |
|
|
(Depending on model) |
|||||||||||
(Depending on model) |
|
(Only LA620*, LA621*, |
|
|
|
|
|
|||||||||
(See p. 28, 29) |
|
LA64**, LA66**, LA69**, |
|
|
|
|
|
|||||||||
|
|
|
|
|
|
LA74**, LN570*, LN572*) |
|
|
|
|
|
|||||
|
|
|
|
|
|
(Depending on model) |
|
|
|
|
|
|||||
|
|
|
|
|
|
(See p. 30) |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cinema 3D Glasses |
Dual play glasses |
|
Cable holder |
|
Power Cord |
|
The number of 3D glasses |
(Depending on model) |
|
(Depending on model) |
|
(Depending on model) |
|
may differ depending on |
|
|
(See p. 22) |
|
|
|
the model or country. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Desk-mount Screw |
|
Desk-mount Cable |
|
Bracket Screw |
|
Bracket Screw |
||||
(1EA : Only |
|
2EA |
|
2EA, M4 x 8 |
|
2EA, P4 x 8 |
||||
32/42/47/50/60LN570*, |
|
(Only 32/42/47/50LA62**, |
|
(Only 32/42LA62**, |
|
(Only 47/50LA62**, |
||||
32/42/47/50/60LN572*) |
|
32/42/47/50LA64**, |
|
32/42LA64**, |
|
47/50LA64**, |
||||
(2EA : Only |
|
32/42/47/50LA66**, |
|
32/42LA66**, |
|
47/50LA66**, |
||||
32/42/47/50LA62**, |
|
32/42/47/50LN571*) |
|
32/42LN571*) |
|
47/50LN571*) |
||||
32/42/47/50LA64**, |
|
(See p. <?>) |
|
(See p. <?>) |
|
(See p. <?>) |
||||
32/42/47/50LA66**, |
|
|
|
|
|
|
|
|
|
|
32/42/47/50LN571*) |
|
|
|
|
|
|
|
|
|
|
(See p. <?>) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
or |
Stand Screws |
Stand Screws |
Stand Screws |
Isolator |
8EA, M4 x 14 |
4EA, M4 x 20 |
3EA, P5 x 25 |
|
(Only LA62**, LA64**, |
(Only LA69**, LA74**) |
4EA, M4 x 14 |
(Depending on model) |
LA66**, LN571*) |
(See p. 17) |
(Only LN570*, LN572*) |
(See p. 12) |
(See p. 16) |
|
(See p. 17) |
|
ASSEMBLING AND PREPARING 11
<![if ! IE]><![endif]>ENGLISH
Wall mount inner |
|
Blu-Ray |
|
Stand Body / Stand |
|
Stand Base |
spacers |
|
(Only LA6980) |
|
Base |
|
(Only LA69**, LA74**) |
4EA |
|
|
|
(Only LA62**, LA64**, |
|
(See p. 17) |
(Only LA64**) |
|
|
|
LA66**, LN571*) |
|
|
(See p. 22) |
|
|
|
(See p. 16) |
|
|
|
|
|
|
|
|
|
Stand Body / Stand Base
(Only LN570*, LN572*) (See p. 17)
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
NOTE
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be
heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
or
Cable / Antenna
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
ASSEMBLING AND PREPARING 13
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
|
|
P |
AG-F2**DP, AG-F3**DP |
AG-F2**, AG-F3**, AG-F4** |
AN-MR400 |
Dual play glasses |
Cinema 3D glasses |
Magic remote |
Tag On
Tag on |
AN-VC*** |
LG Audio device |
|
Video call camera |
|
Compatibility |
LN57** |
LA62**, LA64**, LA66**, LA69**, LA74** |
|
|
|
|
|
AG-F2**DP, AG-F3**DP |
|
• |
|
Dual play glasses |
|
||
|
|
||
|
|
|
|
AG-F2**, AG-F3**, AG-F4** |
|
• |
|
Cinema 3D glasses |
|
||
|
|
||
|
|
|
|
AN-MR400 |
• |
• |
|
Magic remote |
|||
|
|
||
|
|
|
|
AN-VC*** |
• |
• |
|
Video call camera |
|||
|
|
||
|
|
|
|
LG Audio device |
• |
• |
|
|
|
|
|
Tag on |
• |
• |
|
|
|
|
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
<![endif]>ENGLISH
<![endif]>ENGLISH
14 ASSEMBLING AND PREPARING
Parts and buttons
A type : LA62**, LA64**, LA66**, LN571* |
B type : LA69**, 42/47/55LA74** |
|
|
Screen |
Buttons |
Buttons |
|
Screen |
|||
|
|||
|
|
OK
SETTINGS
INPUT
|
Speakers |
|
Remote control sensor |
|
LG Logo light (Only LA64**, LA66**) |
|
Power Indicator (Only LA62**) |
C type : 60LA74** |
|
Screen |
Buttons |
|
OK
SETTINGS
INPUT
Speakers
Remote control sensor
LG Logo light
D type : LN570*, LN572* |
|
Screen |
Buttons |
OK
OK
SETTINGS
|
|
INPUT |
SETTINGS |
|
|
|
|
|
|
|
INPUT |
|
Speakers |
|
Speakers |
|
|
|
|
|
Remote control sensor |
|
Remote control sensor |
|
LG Logo light |
|
|
|
|
Power Indicator |
|
|
|
|
|
Button |
|
|
Description |
|
Scrolls through the saved programmes. |
|
|
|
Adjusts the volume level. |
|
|
|
Selects the highlighted menu option or confirms an input. |
|
|
S |
Accesses the main menu, or saves your input and exits the menus. |
|
|
|
Changes the input source. |
|
|
|
Turns the power on or off. |
NOTE
yy You can set the LG Logo light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING 15
Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy It is recommended to move the TV in the box or packing material that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and all cables.
yy When holding the TV, the screen should face away from you to avoid damage.
yy When transporting a large TV, there should be at least 2 people.
yy When transporting the TV by hand, hold the TV as shown in the following illustration.
yy When transporting the TV, do not expose the TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
<![endif]>ENGLISH