LG 28LB450U, 28LB457U User manual [en,no]
Drawn Approved
Signature
Yujin.Park Jongok.kim
MMM/DD/YYYY
Jan/27/2014 Jan/27/2014
LB45-Z LG MFL68024512
EN LB4500 (1403-REV01)
:LGEAK :LGEKR :LGERS
:LGEAZ :LGEMA :LGESY
:LGEEG :LGEMX :LGETH
:LGEIL :LGEND :LGEVN
:LGEIN :LGERA :LGEWR
:LGEAS
Printed in Indonesia
Printed in Russia
Printed in Poland
Signature
Change Contents
ECO Number
N
O
T
E
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Printed in China
Printed in China
Printed in Thailand
Printed in Vietnam
Manual contents update
EKLE300784
Yujin Park
Mar/10/2014
Rev. Number
MMM/DD/YYYY
132
148 mm x 210 mm (A5)
1 Color (Black)
1 Color (Black)
Uncoated, wood-free paper 150 g/㎡
Uncoated, wood-free paper 60 g/㎡
Perfect binding
ENG/SWE/NOR/DAN/FIN (5)
3. Origin Notification
4. Changes
Printed in Mexico
Printed in Egypt
Printed in India
Printed in Algeria
3. Stock (Paper)
: • Cover
Printed in Mexico
Printed in Poland
Printed in Kazakhstan
Printed in Brazil
:5. Language
:6. Number of pages
:Model name
:2nd, 3rd Suffix
:Brand name
:Product name
:1. Trim size (Format)
2. Printing colors
: • Cover
: • Inside
Printed in Korea
: • Inside
:4. Bindery
(Revision number)
2. Printing Specification
Checked
Jan/27/2014
Mira.Woo
:Part number
1. Model Description
Printing specification
1
10
9
8
7
6
5
4
3
2
Front
(Eng)
P/No. A-2 … … … … A-13 Blank
Front
(ENG)
2 … … … … … 22
Front
(SWE)
2 … … … … … 22
Front
(NOR)
2 … … … … … 22
Front
(DAN)
2 … … … … … 22
Front
(FIN)
2 … … … … … 22
Back
Cover
B-1 B-2 … … B-5 Blank Blank (Eng)
Pagination sheet
132 pages
:Total pages
:Part number
MFL68024512
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set
and retain it for future reference.
LB45**
www.lg.com
*MFL68024512*
P/NO : MFL68024512 (1403-REV01)
Printed in Korea
A-2
TABLE OF CONTENTS
TABLE OF CONTENTS
A-3 SETTING UP THE TV
A-3 Attaching the stand
A-4 MAKING CONNECTIONS
A-4 Antenna connection
A-5 Satellite dish connection
A-6 Adapter connection
A-7 Euro Scart connection
A-9 Other connections
LANGUAGE LIST
English
Svenska
Norsk
Dansk
Suomi
COMMON
LANGUAGE
B-1 SPECIFICATIONS
B-4 REGULATORY
COMMON
SETTING UP THE TV
Image shown may differ from your TV.
Attaching the stand
1
Stand Base
SETTING UP THE TV
A-3
2
CAUTION
yWhen attaching the stand to the TV set, place
the screen facing down on a cushioned table or
at surface to protect the screen from scratches.
A-4
MAKING CONNECTIONS
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the LB450U models.
Antenna connection
ANTENNA
/CABLE IN
(Not Provided)
English
Connect the TV to a wall antenna socket with an RF
cable (75 Ω).
Svenska
Anslut TV:n till ett antennuttag i väggen med en RFkabel (75 Ω).
Obs!
yAnvänd en signalfördelare om du använder fler
än två TV-apparater.
yOm bildkvaliteten är dålig kan du installera en
signalförstärkare för att förbättra bildkvaliteten.
yOm bildkvaliteten är dålig när en antenn är
ansluten ska du rikta åt rätt håll.
yAntennkabel och omvandlare medföljer ej.
yDTV-ljud som stöds: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
Norsk
Koble TV-en til en antennekontakt på veggen med en
RF-kabel (75 Ω).
MERK
yBruk en signalsplitter hvis du vil bruke mer enn
to TV-er.
yHvis bildekvaliteten er dårlig, installerer du en
signalforsterker for å forbedre bildekvaliteten.
yHvis bildekvaliteten er dårlig når en antenne er
koblet til, justerer du antennen i riktig retning.
yAntennekabel og -omformer følger ikke med.
yStøttet DTV-lyd: MPEG, Dolby Digital, Dolby
Digital Plus, HE-AAC
Dansk
Slut TV’et til et vægantennestik med et RF-kabel (75 Ω).
NOTE
yUse a signal splitter to use more than 2 TVs.
yIf the image quality is poor, install a signal
amplifier properly to improve the image quality.
yIf the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yAn antenna cable and converter are not
supplied.
ySupported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
BEMÆRK
yHvis der skal bruges to TV’er, skal du bruge en
signalfordeler.
yHvis billedkvaliteten er dårlig, kan du
forbedre billedkvaliteten ved at installere en
signalforstærker.
yHvis billedkvaliteten er dårlig med en tilsluttet
antenne, kan du prøve at flytte på antennen til
den peger i den korrekte retning.
yDer følger ikke antennekabel og omsætter med
apparatet.
yUnderstøttet DTV-lyd: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
MAKING CONNECTIONS
A-5
Suomi
Kytke TV antennipistorasiaan RF-kaapelilla (75 Ω).
HUOMAUTUS
yKäytä antennijakajaa, jos käytät useampaa kuin
kahta televisiota.
yJos kuvanlaatu on heikko, asenna
signaalinvahvistin oikein, jotta kuvanlaatu
paranee.
yJos kuvanlaatu on heikko, vaikka antenni on
kytketty, säädä antennin suuntaa.
yAntennikaapeli ja muunnin on hankittava
erikseen.
yTuettu DTV-ääni: MPEG, Dolby Digital, Dolby
Digital Plus, HE-AAC
Satellite dish connection
(Only Satellite models)
13/18 V
700 mA Max
LNB IN
Satellite
(Not Provided)
English
Connect the TV to a satellite dish to a satellite socket
with a satellite RF cable (75 Ω).
Svenska
Anslut TV:n till ett parabolantennuttag med en satellitRF-kabel (75 Ω).
Norsk
Koble TV-en til en parabolantenne til en satellittkontakt
med RF-kabel for satellit (75 Ω).
Dansk
Slut TV’et til en parabol og til et satellitstik ved hjælp af
et satellit-RF-kabel (75 Ω).
Suomi
Kytke TV satelliittiantenniin ja satelliittiliitäntään RFkaapelilla (75 Ω).
A-6
MAKING CONNECTIONS
Adapter connection
DC-IN
AC-DC Adapter
or
DC-IN
Norsk
FORSIKTIG
yPass på at du kobler TV-en til
likestrømsadapteren før du kobler
strømkontakten fra TV-en til et vegguttak.
Dansk
FORSIGTIG
ySørg for at slutte TV’et til DC-strømadapteren
før du slutter stikkontakten til TV’et til stikket i
væggen.
Suomi
VAROITUS
yKytke TV muuntajaan ennen kuin kytket sen
virtajohdon pistorasiaan.
AC-DC Adapter
English
CAUTION
yPlease be sure to connect the TV to the AC-DC
power adapter before connecting the TV’s power
plug to a wall power outlet.
Svenska
SE UPP!
yVar noga med att ansluta TV:n till
likströmsadaptern innan nätkontakten till TV:n
ansluts till vägguttaget.
MAKING CONNECTIONS
A-7
Euro Scart connection
(Not Provided)
English
Transmits the video and audio signals from an
external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown.
Output Type
Current
input mode
Digital TV Digital TV
Analogue TV
Component, AV, HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
AV1
(TV Out1)
Analogue TV
Svenska
Sänder video- och ljudsignalerna från en extern enhet
till TV:n. Anslut den externa enheten till TV:n med Euro
Scart-kabeln så som visas på bilden nedan.
Typ av utgång
Aktuellt
insignalsläge
Digital-TV Digital-TV
Analog-TV
Komponent. AV, HDMI
1 TV-utgång: Utdatasignaler för analog- eller digital-TV.
AV1
(
TV-utgång1)
Analog-TV
Obs!
yOm du vill använda en scartkabel måste du
använda en signalavskärmade typ.
Norsk
Sender video- og lydsignalene fra en ekstern enhet
til TV-en. Koble den eksterne enheten til TV-en
med Euro Scart-kabelen, som vist i illustrasjonen
nedenfor.
Utgangstype
Gjeldende
modus for
innsignal
Digital-TV Digital-TV
Analog TV
Komponent, AV, HDMI
1 TV-uttak: Genererer analoge eller digitale TV-
signaler.
AV1
(TV-uttak1)
Analog-TV
MERK
yEURO scart-kabelen som brukes, må være
signalskjermet.
NOTE
yAny Euro scart cable used must be signal
shielded.
A-8
MAKING CONNECTIONS
Dansk
Overfører video- og lydsignalerne fra en ekstern
enhed til TV’et. Tilslut den eksterne enhed og TV’et
med Scart-kablet som vist i følgende illustration.
Udgangstype
Aktuel
indgangstilstand
Digitalt TV Digitalt TV
Analogt TV
Component, AV, HDMI
1 TV ud: udsender analoge eller digitale TV-signaler.
AV1
(TV ud1)
Analogt TV
BEMÆRK
yBrug et Scart-kabel, der er afskærmet.
Suomi
Siirtää video- ja äänisignaalin ulkoisesta laitteesta
televisioon. Kytke ulkoinen laite ja televisio Euro
Scart -kaapelilla seuraavan kuvan mukaisesti.
Lähdön
Nykyinen
tyyppi
tulotila
Digitaalinen TV Digitaalinen TV
Analoginen TV
Komponentti, AV, HDMI
1 TV-lähtö: ulostulot analogisen television tai
digitaalisen television signaaleille.
AV1
(TV-lähtö1)
Analoginen TV
HUOMAUTUS
yKaikkien käytettävien Euro scart -kaapelien on
oltava suojattuja.
Other connections
(Only LAN PORT
models)
or
LAN
YELLOW
L
(MONO)
R
WHITE
RED
MAKING CONNECTIONS
A-9
(Only satellite models)
13/18 V
700mA Max
LNB IN
Satellite
(MONO)
R
L
(MONO)
L
BLUE
L
RED
(MONO)
R
WHITE
RED
WHITE
R
RED
Mobile
Phone
DVD / Blu-Ray / HD STB /
HD Cable Box / PC
DVD / Blu-Ray / HD Cable Box / VCR
YELLOW
L
(MONO)
WHITE
RED
R
GREENGREEN
BLUE
DVD / Blu-Ray /
RED
WHITE
RED
AUDIO OUT
HD Cable Box
DVD / Blu-Ray / HD Cable Box / PC
DVI OUT
A-10
MAKING CONNECTIONS
PCMCIA
CARD SLOT
USB IN
H / P
USB / HDD
Headphone
1
MAKING CONNECTIONS
A-11
English
Connect your TV to external devices. For the best
picture and audio quality, connect the external device
and the TV with the HDMI cable as shown. Some
separate cable is not provided.
1 USB port supports 0.5A electric current. If you
need more electric current in case of HDD, use the
separate power adaptor.
Svenska
Anslut TV:n till externa enheter. För att få bästa bildoch ljudkvalitet ska du ansluta den externa enheten till
TV:n med HDMI-kabeln som på bilden nedan. Vissa
separata kablar medföljer inte.
1 USB-porten har stöd för 0,5 A.
Om du behöver mer ström för HDD ska du
använda den separata nätadaptern.
Norsk
Koble TV-en til eksterne enheter. Koble den eksterne
enheten til TV-en med HDMI-kabelen som vist her for
best mulig bilde- og lydkvalitet. Enkelte separate kabler
er ikke inkludert.
1 USB-porten støtter elektrisk strøm på 0,5 A.
Hvis du trenger mer elektrisk strøm ved bruk av
HDD, kan du bruke den separate strømadapteren.
Dansk
Slut dit tv til eksterne enheder. For at få den bedste billed- og lydkvalitet, skal du tilslutte den eksterne enhed
og tv'et med HDMI-kablet som vist. Nogle særskilte
kabler medfølger ikke.
1 USB-port understøtter 0,5A elektrisk strøm.
Hvis du skal bruge mere elektrisk strøm ved HDD,
skal du bruge den særskilte strømadapter.
English
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
yThe external device connection may differ from
the model.
yConnect external devices to the TV regardless
of the order of the TV port.
yIf you record a TV programme on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a DVD
recorder or VCR. For more information of
recording, refer to the manual provided with the
connected device.
yRefer to the external equipment’s manual for
operating instructions.
yIf you connect a gaming device to the TV, use
the cable supplied with the gaming device.
yIn PC mode, there may be noise associated
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
yIn PC mode, some resolution settings may not
work properly depending on the graphics card.
Suomi
Ulkoisten laitteiden liittäminen televisioon: saat laadukkaimman kuvan ja äänen, kun liität ulkoisen laitteen
televisioon HDMI-kaapelilla kuvan mukaisesti. Tiettyjä
erillisiä kaapeleita ei toimiteta mukana.
1 USB-portti tukee 0,5 A:n sähkövirtaa.
Jos mahdollinen kiintolevy tarvitsee enemmän
virtaa, käytä erillistä muuntajaa.
A-12
MAKING CONNECTIONS
Svenska
Anslut olika externa enheter till TV:n och byt inställningsläge för att välja en extern enhet. Mer information
om anslutning av externa enheter nns i manualen för
varje enhet.
Tillgängliga externa enheter är: HD-mottagare, DVDspelare, videobandspelare, ljudanläggningar, USBlagringsenheter, datorer, spelenheter och andra externa
enheter.
Obs!
yAnslutningen för den externa enheten kan skilja
sig från modellen.
yExterna enheter kan anslutas till TV:n
oberoende av ordningen på TV:ns portar.
yFör att spela in ett TV-program på en DVD-
spelare eller videobandspelare måste du se till
att signalkabeln till TV:n går genom en DVDspelare eller videobandspelare. Mer information
om inspelning finns i manualen till den anslutna
enheten.
yAnvändningsinstruktioner hittar du i
användarhandboken för den externa enheten.
yOm du ansluter en spelenhet till TV:n ska du
använda den kabel som följer med spelenheten.
yI datorläge kan det uppstå störningar i
upplösning, vertikalt mönster, kontrast eller
ljusstyrka. Om det inträffar störningar, kan du
prova med att ändra datorutgången till en annan
upplösning, ändra uppdateringsfrekvensen till
en annan inställning eller justera ljusstyrka och
kontrast på menyn BILD tills bilden blir tydlig.
yI PC-läge kanske inte vissa
upplösningsinställningar fungerar som de ska
beroende på grafikkortet.
Norsk
Koble ulike eksterne enheter til TV-en og bytt innsignalsmodus for å velge en ekstern enhet. Hvis du vil ha
mer informasjon om tilkobling av eksterne enheter, kan
du se manualen som fulgte med enhetene.
De tilgjengelige eksterne enhetene er: HD-mottakere,
DVD-spillere, videospillere, lydsystemer, USB-lagringsenheter, PC-er, spillenheter og andre eksterne enheter.
MERK
yHvilke eksterne enheter som kan kobles til,
avhenger av modell.
yKoble eksterne enheter til TV-en uavhengig av
rekkefølgen på TV-portene.
yHvis du tar opp et TV-program på en DVD-
spiller eller en videospiller, må du koble
innsignalkabelen for TV-signalet til TV-en via en
DVD-spiller eller videospiller. Hvis du vil ha mer
informasjon om opptak, kan du se manualen
som fulgte med den tilkoblede enheten.
yDu finner instruksjoner for bruk i
brukerhåndboken for det eksterne utstyret.
yHvis du kobler en spillenhet til TV-en, må du
bruke kabelen som fulgte med spillenheten.
yDet kan forekomme støy i forbindelse med
oppløsning, vertikalt mønster, kontrast eller
lysstyrke i PC-modus. Hvis det finnes støy, kan
du endre PC-modusen til en annen oppløsning,
endre oppdateringsfrekvensen eller juster
lysstyrken og kontrasten på menyen BILDE for
å få et klart bilde.
yI PC-modus er det ikke sikkert at alle
oppløsningsinnstillinger fungerer, avhengig av
skjermkortet.
MAKING CONNECTIONS
A-13
Dansk
Slut forskellige eksterne enheder til TV’et, og skift ind-
gangstilstand for at vælge en ekstern tilstand. Du nder
ere oplysninger om tilslutning af eksterne tilstande i
manualen, der følger med hver enkelt enhed.
Tilgængelige eksterne enheder er følgende: HD-modtagere, DVD-afspillere, videoafspillere, lydsystemer,
USB-lagerenheder, PC’er, spilleenheder og andre
eksterne enheder.
BEMÆRK
yTilslutningen af den eksterne enhed varierer,
afhængigt af modellen.
ySlut eksterne enheder til TV’et, uanset
rækkefølgen på TV-porten.
yHvis du optager et TV-program på en DVD-
eller videooptager, skal du sørge for at forbinde
indgangssignalkablet til TV’et via en dvd- eller
videooptager. Du finder flere oplysninger om
optagelse i den vejledning, der følger med den
tilsluttede enhed.
ySe vejledningen til det eksterne udstyr for at få
oplysninger om betjening.
yHvis du slutter en spilleenhed til TV’et, skal du
bruge kablet, der følger med spilleenheden.
yI PC-tilstand kan der opstå støj tilknyttet
opløsning, lodret mønster, kontrast eller
lysstyrke. Hvis der er støj til stede, skal
PC’ens output ændres til en anden opløsning,
opdateringen ændres til en anden hastighed
eller lysstyrken og kontrasten justeres i menuen
BILLEDE, indtil billedet bliver klart.
yI PC-tilstand kan visse indstillinger for opløsning
muligvis ikke fungere korrekt afhængigt af
grafikkortet.
Suomi
Kytke ulkoisia laitteita televisioon ja valitse ulkoinen laite vaihtamalla tulolähdettä. Lisätietoja ulkoisen laitteen
kytkemisestä on kyseisen laitteen käyttöoppaassa.
Hyväksytyt ulkoiset laitteet: HD-vastaanottimet,
DVD-soittimet, videonauhurit, äänijärjestelmät, USBtallennuslaitteet, tietokoneet, pelilaitteet ja muut ulkoiset
laitteet.
HUOMAUTUS
yUlkoisen laitteen kytkentä voi vaihdella mallin
mukaan.
yKytke ulkoiset laitteet televisioon riippumatta
TV-portin järjestyksestä.
yJos tallennat TV-ohjelmaa DVD-tallentimella
tai videonauhurilla, muista kytkeä TV:n
tulosignaalikaapeli DVD-tallentimeen tai
videonauhuriin. Lisätietoja tallentamisesta on
ulkoisen laitteen käyttöoppaassa.
yKatso lisätietoja ulkoisen laitteen
käyttöoppaasta.
yJos kytket pelilaitteen televisioon, käytä
pelilaitteen mukana toimitettua kaapelia.
yPC-tilassa voi esiintyä tarkkuuteen,
pystykuvioihin, kontrastiin tai kirkkauteen
liittyviä häiriöitä. Jos häiriöitä esiintyy,
muuta tietokoneen kuvan resoluutiota ja
virkistystaajuutta tai säädä KUVA-valikon
kirkkautta ja kontrastia, kunnes kuva on selkeä.
yPC-tilassa jotkin tarkkuusasetukset eivät ehkä
toimi oikein joidenkin näytönohjainten kanssa.
OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set
and retain it for future reference.
www.lg.com
ENG
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
ENGLISH
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and
other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an ofcial DivX Certied® device that has passed rigorous
testing to verify that it plays DivX video. Visit divx.com for more information and software
tools to convert your les into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certied® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com
for more information on how to complete your registration.
“DivX Certied® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certied® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for
download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
This offer is valid for three (3) years from the date on which you purchased the product.
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control in the following environments:
y
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce heat
- Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
y
This may cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.
y
This plug must remain readily attached and operable when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
y
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains socket with Grounded
y
earth pin. (Except for devices which are not grounded on earth.) Otherwise
possibility you may be electrocuted or injured.
ENGENGLISH
Insert power cable plug completely into wall socket otherwise if not secured
y
completely into socket, fire ignition may break out.
Ensure the power cord does not come into contact with hot objects such as a heater.
y
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
y
Otherwise, this may result in fire or electric shock.
ENG
4
ENGLISH
SAFETY INSTRUCTIONS
Bend antenna cable between inside and outside building to prevent rain from flowing
y
in.
This may cause water damaged inside the Product and could give an electric shock.
When mounting TV onto wall make sure to neatly install and isolate cabling from
y
rear of TV as to not create possibility of electric shock /fire hazard.
Do not plug too many electrical devices into a single multiple electrical outlet.
y
Otherwise, this may result in fire due to over-heating.
Do not drop the product or let it fall over when connecting external devices.
y
Otherwise, this may result in injury or damage to the product.
Keep the anti-moisture packing material or vinyl packing out of the reach of children.
y
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
y
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not consume
y
them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
y
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal. You may be electrocuted.
(Depending on model)
Do not put or store inflammable substances near the product.
y
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
y
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
y
or benzene). Fire or electric shock accident can occur.
SAFETY INSTRUCTIONS
Do not allow any impact, shock or any objects to fall into the unit, and do not drop
y
anything onto the screen.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
y
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
y
ventilate.
It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the product at your own discretion.
y
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
y
service centre.
- The product has been impacted by shock
- The product has been damaged
- Foreign objects have entered the product
- The product produced smoke or a strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the TV for a
y
long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can cause electric
leakage/shock/fire.
5
ENGENGLISH
Apparatus shall not be exposed to dripping or splashing and no objects filled with
y
liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil mist.
y
This may damage the product and cause it to fall.
CAUTION
Install the product where no radio wave occurs.
y
There should be enough distance between an outside antenna and power lines to
y
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
ENG
6
ENGLISH
SAFETY INSTRUCTIONS
Do not install the product on places such as unstable shelves or inclined surfaces. Also
y
avoid places where there is vibration or where the product cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to the
product.
If you install the TV on a stand, you need to take actions to prevent the product from
y
overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to
y
the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it
carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
y
When installing the antenna, consult with a qualified service technician. If not
y
installed by a qualified technician, this may create a fire hazard or an electric shock
hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
y
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
y
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
y
This may cause the batteries to overheat and leak.
Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight , open
y
fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.
y
Make sure there are no objects between the remote control and its sensor.
y
Signal from Remote Control can be interrupted due to external/internal lighting eg
y
Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game consoles, make sure the
y
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the product.
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
y
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
SAFETY INSTRUCTIONS
Please follow the installation instructions below to prevent the product from
y
overheating.
- The distance between the product and the wall should be more than 10 cm.
- Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a
cupboard).
- Do not install the product on a carpet or cushion.
- Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
y
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration,
y
unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by
an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
y
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
y
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil
y
or pen, or make a scratch on it, as it may cause damage to screen.
7
ENGENGLISH
Avoid touching the screen or holding your finger(s) against it for long periods of time.
y
Doing so may produce some temporary or permanent distortion/damage to screen.
When cleaning the product and its components, unplug the power first and wipe it
y
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source
y
even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
y
Don’t pull at the cord to unplug the power cord from the power board, as this could be
hazardous.
ENG
8
ENGLISH
SAFETY INSTRUCTIONS
When moving the product, make sure you turn the power off first. Then, unplug the power
y
cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or cause
electric shock.
When moving or unpacking the product, work in pairs because the product is heavy.
y
Otherwise, this may result in injury.
Contact the service centre once a year to clean the internal parts of the product.
y
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
y
has been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned on.
y
This is normal, there is nothing wrong with product.
The panel is a high technology product with resolution of two million to six million pixels.
y
You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size
of 1 ppm on the panel. This does not indicate a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange or
refund.
You may find different brightness and colour of the panel depending on your viewing
y
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with the
product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for
y
a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as
image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1
or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the
panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
y
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic
thermal contraction due to tempera-ture and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depend-ing
on the product.
This generated sound does not affect the performance and reliability of the product.
ASSEMBLING AND PREPARING
<
<
9
NOTE
yImage shown may differ from your TV.
yYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yThe available menus and options may differ from the input source or product model that you are using.
yNew features may be added to this TV in the future.
yThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
yThe energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where
you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yDo not use any unapproved items to ensure the safety and product life span.
yAny damage or injuries caused by using unapproved items are not covered by the warranty.
ySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yThe items supplied with your product may vary depending on the model.
yProduct specifications or contents of this manual may be changed without prior notice due to upgrade of
product functions.
yFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18
mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit
into your TV’s USB port.
ENGENGLISH
B
A
B
*A
10 mm
=
*B
18 mm
A
=
ENG
10
ENGLISH
ASSEMBLING AND PREPARING
Remote control,
batteries (AAA)
Power Cord AC-DC Adaptor AC-DC Adaptor
(Depending on model)
Stand Base
Owner’s manual Cable Holder
or
(Depending on model)
Parts and buttons
Joystick Button
(* This button is located below the TV
screen.)
Speakers
ASSEMBLING AND PREPARING
Screen
11
ENGENGLISH
Remote Control sensor
Power Indicator
yLighting On: When Power is turned off
yLighting Off: When Power is turned on
NOTE
yYou can set the power indicator light to on or off by selecting OPTION in the main menus.
ENG
12
ASSEMBLING AND PREPARING
Using the Joystick button
ENGLISH
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
Power Off
Volume
Control
Programmes
Control
When the TV is turned off, place your finger on the joystick button and
press it once and release it.
When the TV is turned on, place your finger on the joystick button and
press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and holding the
joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left or right, you
can adjust the volume level you want.
If you place your finger over the joystick button and move it up or down, you
can scrolls through the saved programmes you want.
NOTE
yWhen your finger over the joystick button and push it to the up, down, left or right, be careful not to press
the joystick button. If you press the joystick button first, you can not adjust the volume level and saved
programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items (
, , , ) moving the joystick button up, down, left or right.
TV Off Turns the power off.
Settings Accesses the main menu.
Close Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
13
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
yAvoid touching the screen at all times, as this
may result in damage to the screen.
yIt is recommended to move the TV in the box or
packing material that the TV originally came in.
yBefore moving or lifting the TV, disconnect the
power cord and all cables.
yWhen holding the TV, the screen should face
away from you to avoid damage.
yHold the top and bottom of the TV frame rmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yWhen transporting a large TV, there should be at
least 2 people.
yWhen transporting the TV by hand, hold the TV as
shown in the following illustration.
yWhen transporting the TV, do not expose the TV
to jolts or excessive vibration.
yWhen transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the left
or right.
yDo not apply excessive pressure to cause exing
/bending of frame chassis as it may damage
screen.
CAUTION
yWhen handling the TV, be careful not to damage
the protruding joystick button.
ENGENGLISH
14
ASSEMBLING AND PREPARING
ENG
Mounting on a table
ENGLISH
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
2 Connect the power cord to a wall outlet.
10 cm
10 cm
CAUTION
yDo not place the TV near or on sources of heat,
as this may result in fire or other damage.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eyebolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
yMake sure that children do not climb on or hang
on the TV.
NOTE
yUse a platform or cabinet that is strong and
large enough to support the TV securely.
yBrackets, bolts and ropes are not provided. You
can obtain additional accessories from your
local dealer.
Loading...