LG 27MU58P-B User Guide

Owner's Manual

IPS LED MONITOR
(LED MONITOR*)

*LG LED Monitors are LCD Monitors with LED Backlighting.

Please read the safety information carefully before using the product.

IPS LED Monitor (LED Monitor) Model List

27UD58P
27MU58P

www.lg.com

2

Contents

ENGLISH

ENG

CONTENTS

3 LICENSE

4 ASSEMBLING AND PREPARING

4 Product Components

5 Supported Drivers and Software

6 Component and Button Description

6 - How to Use the Joystick Button

7 Input Connector

8 Moving and Lifting the Monitor

9 Installing the Monitor

9 - Assembling the stand base

10 - Using the cable holder

11 - Installing onto a table

12 - Adjusting the angle

12 - Adjusting the Stand Height

13 - Pivot Feature

14 - Using the Kensington lock

14 - Detaching the Stand Body

14 - Installing the wall mount plate

15 - Installing to a wall

18 USER SETTINGS

19 Customizing settings

19 - Menu Settings

19 - -Quick Settings

20 - -Picture

23 - -General

24 - -Reset

25 TROUBLESHOOTING

27 SPECIFICATIONS

27 27UD58P/27MU58P

28 Factory Support Mode (Preset Mode, PC)

28 HDMI

28 DisplayPort

29 HDMI Timing (Video)

29 Power LED

16 USING THE MONITOR

16 Connecting to a PC

16 - HDMI connection

16 - DisplayPort connection

17 Connecting to AV Devices

17 - HDMI connection

17 Connecting to External Devices

17 - Connecting Headphones

LICENSE

3

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

ENGLISH

ENG

The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

ENGLISH

ENG

ASSEMBLING AND PREPARING

4

ASSEMBLING AND PREPARING

Product Components

Please check whether all the components are included in the box before using the product. If there are missing com­ponents, contact the retail store where you purchased the product. Note that the product and components may look
different from those shown here.

CAUTION

CD / Card

HDMI Cable

( This cable is not included

in all countries. )

Stand Base

Power Cord

Display Port Cable

( This cable is not included in

all countries. )

Stand Body

Always use genuine components to ensure safety and product performance.

y

The product warranty will not cover damage or injury caused by the use of counterfeit components.

y

It is recommend that use the supplied components.

y

If you use generic cables not certified by LG, the screen may not display or there may be image noises.

y

NOTE

Note that the components may look different from those shown here.

y

Without prior notice, all information and specifications in this manual are subject to change to improve the

y

performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store

y

where you purchased the product.

ASSEMBLING AND PREPARING

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

Drivers and Software Installation Priority 27UD58P/27MU58P

Monitor Driver Recommended O

OnScreen Control Recommended O

Dual Controller Recommended O

5

ENGLISH

ENG

ENGLISH

ENG

ASSEMBLING AND PREPARING

6

Component and Button Description

Power LED

On: power is on

y

Off: power is off

y

Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.

Basic Functions

Press the joystick button once with your finger to turn on the
monitor.

Press and hold the joystick button once with your finger to turn off the
monitor.

You can control the volume by moving the joystick button left/right.

◄/►

Power on

Power off

Volume

Control

NOTE

The joystick button is located at the bottom of the monitor.

y

Input Connector

ASSEMBLING AND PREPARING

7

ENGLISH

ENG

ASSEMBLING AND PREPARING

8

ENGLISH

ENG

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these in­structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regard­less of its shape or size.

It is advisable to place the monitor in the original

y

box or packing material before attempting to
move it.
Before moving or lifting the monitor, disconnect

y

the power cord and all cables.
Hold the top and bottom of the monitor frame

y

firmly. Do not hold the screen itself.

CAUTION

As far as possible, avoid touching the monitor

y

screen. This may result in damage to the screen or
some of the pixels used to create images.

If you use the monitor panel without the stand

y

base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.

When holding the monitor, the screen should face

y

away from you to prevent it being scratched.

When moving the monitor, avoid any strong shock

y

or vibrations to the product.
When moving the monitor, keep it upright, never

y

turn the monitor on its side or tilt it sideways.

Installing the Monitor

Assembling the stand base

1

ASSEMBLING AND PREPARING

3

9

ENGLISH

ENG

CAUTION

To protect the screen from scratches, cover the

y

surface with a soft cloth.
Remove a tape on the surface of stand body.

y

2

Tape

Stand Body

Stand Base

or

4

NOTE

Press the stand until the button reaches the top.

y