LG 27GP850-B User manual

Owner’s Manual

(LED Monitor*)

* LG LED Monitor applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

27GP850

27GP83B

32GP83B

www.lg.com

TABLE OF CONTENTS

LICENSE

ENGLISH

LICENSE .........................................................2

OPEN SOURCE SOFTWARE NOTICE

INFORMATION ...............................................3

ASSEMBLING AND PREPARING .....................3

USING THE MONITOR ...................................13

USER SETTINGS ...........................................16

TROUBLESHOOTING ....................................22

PRODUCT SPECIFICATION ............................25

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

only 27GP850

OPEN SOURCE SOFTWARE NOTICE

ASSEMBLING AND PREPARING

INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

CAUTION

• Always use genuine LG components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of unauthorised components.

• It is recommended that use the supplied components.

• Illustrations in this document represent typical procedures, so they may look different from the actual

product.

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product.

(Doing so may damage the product.)

• Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this

way will not be covered by the product warranty.

• Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the

stand and could result in personal injury.

• When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor

screen may cause damage to it.

• For wave pattern on appearance, unlike the general method of coating, it’s applied to added glittering

material in raw material. With no peeled-off appearance, it has good durability. Please use it with conﬁdence because there is no problem in using the product at all.

ENGLISH

NOTE

• The components may look different from those illustrated here.

• Without prior notice, all product information and specifications contained in this manual are subject to

ENGLISH

change to improve the performance of the product.

• To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer

from which you purchased the product.

• The power cord provided may differ depending upon the region.

Supported Drivers and Software

You can download and install the latest version from the LGE website (www.lg.com).

- Monitor Driver /

Product and Button Description

Joystick Button

How to Use the Joystick Button

You can easily control the functions of the monitor by pressing the joystick button or moving it left/right/up/ down with your finger.

Basic Functions

(Power on): Press the joystick button once with your finger to turn on the monitor. (Power off ): Press and hold the joystick button once with your finger to turn off the monitor. (Volume control): You can control the volume by moving the joystick button left/right.

(Controls screen brightness): You can control the screen’s brightness by moving the joystick button up/down.

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.

• Place the monitor in the original box or packing material before attempting to move it.

• Before moving or lifting the monitor, disconnect the power cord and all other cables.

• Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.

• When holding the monitor, the screen should face away from you to prevent it from being scratched.

• When transporting the monitor, do not expose the monitor to shock or excessive vibration.

• When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.

ENGLISH

CAUTION

• Avoid touching the monitor screen as much as possible.

- This may result in damage to the screen or some of the pixels used to create images.

• If you use the monitor panel without the stand base, its joystick button may cause the monitor to become

ENGLISH

unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.

Installing on a Table

• Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away

from the wall to ensure sufficient ventilation.

: 100 mm

CAUTION

• Unplug the power cord before moving or installing the monitor. There is risk of electric shock.

• Make sure to use the power cord that is provided in the product package and connect it to a grounded power

outlet.

• If you need another power cord, please contact your local dealer or the nearest retail store.

Adjusting the Stand Height

1 Place the monitor mounted on the stand base in an upright position. 2 Handle the monitor with both hands for safety.

ENGLISH

Max. 110.0mm

WARNING

• When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.

Adjusting the Angle

1 Place the monitor mounted on the stand base in an upright position. 2 Adjust the angle of the screen.

The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing

ENGLISH

experience.

WARNING

• To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame

as illustrated below.

• Be careful not to touch or press the screen area when adjusting the angle of the monitor.

Pivot Feature

The pivot feature allows the monitor to rotate 90° clockwise.

WARNING

• When using the Pivot function, do not rotate the monitor too fast or with excessive force.

- The head may come in contact with the stand and scratch the base.

- Be careful as you may injure your finger by jamming it between the head and the stand.

Monitor’s head

Stand

1 Raise the monitor up to the maximum height.

3 Rotate the monitor clockwise as shown in the figure.

ENGLISH

2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.

4 Complete the installation by rotating the monitor 90° as shown in the figure.

+ 20 hidden pages