LG Electronics 19LD34, 26LD32, 32LE4, 32LE5, 22LD34 User Manual

...
ENGLISH
OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
Downloaded From TV-Manual.com Manuals
www.lg.com
Separate purchase
Wall Mounting Bracket
LSW100B or
LSW100BG
(19/22/26/32LD3
32LD4
, 32LD5
***
19/22/26/32LE3
32LE4
, 22/26LE5
***
32LE5
*** *** *** *** ***
, , , , )
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or regis­tered trademarks of HDMI Licensing LLC.
Downloaded From TV-Manual.com Manuals
LSW200B or
LSW200BG
(37/42/47LD4
42/46LD5 37/42LE4
37/42/47LE5
*** *** *** ***
Wireless Media Box
LSW400B or
LSW400BG
, , , )
(52/60LD5
55LE5
***
***
,
)
(32/42/46/52/60LD5
32LE3
, 32/37/42LE4
***
32/37/42/47/55LE5
***
***
,
,
***
)
CONTENTS
PREPARATION
LCD TV Models : 19/22/26/32LD35 19/22/26/32LD34
LCD TV Models : 32/37/42/47LD4 LCD TV Models : 32/42/46/52/60LD5 LED LCD TV Models : 19/22/26/32LE3 42LE4
, 22/26LE5
***
** ..........................................A-1
***
32/37/42/47/55LE5
***,
**,
, 26/32LD32
*** ...... A-24
, 32/37/
***
*** ...... A-33
** .... A-14
EXTERNAL EQUIPMENT SETUP
Antenna Connection ............................................1
Connecting with a Component cable ..................2
Connecting with an HDMI cable .........................3
Connecting with an HDMI to DVI cable ..............4
Connecting with a Euro Scart cable ...................5
USB setup ...........................................................6
Connecting with a RF Cable ...............................6
Connecting with a RCA cable .............................7
Connecting with a D-sub 15 pin cable ................8
Insertion of CI Module .........................................9
Headphone Setup ...............................................9
Digital audio out Setup ......................................10
External Equipment WIreless Connection ........11
Supported Display Resolution ...........................12
Screen Setup for PC mode ...............................13
WATCHING TV / PROGRAMME CON­TROL
Product/service information...............................39
Simple Manual ..................................................40
Selecting the Programme List ...........................41
Input List ............................................................43
Input Label ........................................................44
Data Service ......................................................45
SIMPLINK ..........................................................46
AV Mode ............................................................50
Initializing(Reset to original factory settings) ....51
TO USE A USB DEVICE
When connecting a USB device .......................52
Movie list ..........................................................54
Photo list ............................................................65
Music list ............................................................75
DivX Registration Code ....................................84
Deactivation .....................................................85
EPG(ELECTRONIC PROGRAMME GUIDE)(IN DIGITAL MODE)
Switch on/off EPG .............................................87
Select a programme ..........................................87
Button Function in NOW/NEXT Guide Mode ...87
Button Function in 8 Day Guide Mode .............88
Button Function in Date Change Mode ............89
Button Function in Extended Description Box ..89 Button Function in Record/Remind Setting Mode 90
Button Function in Schedule List Mode ............91
CONTENTS
Turning on the TV .............................................17
Initializing Setup ...............................................17
Programme Selection ........................................17
Volume Adjustment ...........................................17
Quick Menu .......................................................18
On Screen Menus Selection and adjustment ...19
Auto programme tuning ...................................20
Cable DTV setting .............................................25
Manual programme Tuning ...............................26
Programme Edit ...............................................30
CI [Common Interface] Information ...................34
Software Update ...............................................35
Picture/Sound test .............................................37
Diagnostics ........................................................38
Downloaded From TV-Manual.com Manuals
I
CONTENTS
CONTENTS
PICTURE CONTROL
Picture Size (Aspect Ratio) Control ..................92
Picture Wizard ...................................................94
Energy Saving ...................................................95
Preset Picture Settings .....................................96
Manual Picture Adjustment ...............................97
Picture Improvement Technology ......................98
Expert Picture Control .......................................99
Picture Reset ...................................................102
Trumotion ........................................................103
Power Indicator ..............................................104
Mode Setting ...................................................105
Demo Mode .....................................................106
SOUND & LANGUAGE CONTROL
Auto Volume Leveler .......................................107
Clear Voice II ...................................................108
Preset Sound Settings-Sound Mode ..............109
Sound Setting Adjustment -User Mode ..........110
Infinite Sound ..................................................110
Balance ........................................................... 111
TV Speakers On/ Off Setup ............................112
DTV Audio Setting (in digital mode only) ........113
Selecting Digital Audio out ..............................114
Audio Reset .....................................................115
Audio Description (In digital mode only) .........116
I/II
-
Stereo/Dual Reception (In Analogue Mode Only) 117
- NICAM Reception (In Analogue Mode Only) 118
- Speaker Sound Output Selection ................118
On-Screen Menu Language / Country Selection 119
Language Selection ........................................120
PARENTAL CONTROL / RATINGS
Set Password & Lock System.........................125
Block Programme ............................................126
Parental Control (In Digital Mode only) ...........127
External Input Blocking ...................................128
Key Lock..........................................................129
TELETEXT
Switch on/off ...................................................130
SIMPLE Text....................................................130
TOP Text..........................................................131
FASTEXT ........................................................131
Special Teletext Functions ..............................132
DIGITAL TELETEXT
Teletext within Digital Service .........................133
Teletext in Digital Service ................................133
APPENDIX
Troubleshooting ...............................................134
Maintenance ....................................................136
Product Specifications .....................................137
IR Codes .........................................................148
External Control Device Setup ........................149
Open source software notice ..........................156
TIME SETTING
Clock Setup .....................................................122
Auto on/off time setting ...................................123
Sleep Timer setting .........................................124
II
Downloaded From TV-Manual.com Manuals

PREPARATION

LCD TV MODELS : 19/22/26/32LD35**, 19/22/26/32LD34
**
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
This item is not included for all models.
* Lightly wipe any stains or
Owner’s Manual Batteries
(AAA)
Ferrite Core
(
This item is not included
for all models.
)
Remote Control
Polishing Cloth
Polishing cloth for
use on the screen.
Power Cord
fingerprints on the surface of the TV with the polish­ing cloth.
Do not use excessive force. This may cause scratching or discoloura­tion.
PREPARATION
Only 19/22LD35**, 19/22LD34
Cable Holder
Only 26/32LD35**, 26/32LD34
x 8
(M4x20)
Bolts for stand assembly
**
Protection Cover
**
1-screw for stand fixing
Protection Cover
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.
The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.
Downloaded From TV-Manual.com Manuals
A-1
PREPARATION
FRONT PANEL CONTROLS
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will
PREPARATION
reduce energy consumption.
►The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
►Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
Only 19/22LD35**, 19/22LD34**
MENUPOWER
VOLUME
OKINPUT
SPEAKER
Remote Control Sensor
PROGRAMME
Only 26/32LD35**, 26/32LD34
**
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
A-2
Downloaded From TV-Manual.com Manuals
BACK PANEL INFORMATION
Only 19/22LD35**, 19/22LD34
■ Image shown may differ from your TV.
1
2
4 6 7
3
5
**
11
12
13
PREPARATION
9 10
8
1
Power Cord Socket
This TV operates on an AC power. The volt­age is indicated on the Specifications page. (p.137 to 147) Never attempt to operate the TV on DC power.
2
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Connect to a Digital Audio Component. Use an Optical audio cable.
4
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5
Audio/Video Input
Connect audio/video output from an external device to these jacks.
6
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
Downloaded From TV-Manual.com Manuals
7
Component Input
Connect a component video/audio device to these jacks.
8
RGB IN Input
Connect the output from a PC.
9
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
10
Antenna Input
Connect antenna or cable to this jack.
11
USB Input
Connect USB storage device to this jack.
12
PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
13
Headphone Socket
Plug the headphone into the headphone
socket.
A-3
PREPARATION
PREPARATION
Only 26LD35**, 26LD34
**
■ Image shown may differ from your TV.
1
2
4 5 6
3
10
11
2
12
13
8 9
7
1
Power Cord Socket
This TV operates on an AC power. The volt­age is indicated on the Specifications page. (p.137 to 147) Never attempt to operate the TV on DC power.
2
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Connect to a Digital Audio Component. Use an Optical audio cable.
4
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
6
Component Input
Connect a component video/audio device to these jacks.
7
RGB IN Input
Connect the output from a PC.
8
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
9
Antenna Input
Connect antenna or cable to this jack.
10
USB Input Connect USB storage device to this jack.
PCMCIA (Personal Computer Memory
11
Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
12
Headphone Socket
Plug the headphone into the headphone
socket.
13
Audio/Video Input
Connect audio/video output from an external device to these jacks.
A-4
Downloaded From TV-Manual.com Manuals
Only 32LD35**, 32LD34
**
■ Image shown may differ from your TV.
1
10
PREPARATION
11
2
1
Power Cord Socket
3 4 5 6
7 98
This TV operates on an AC power. The volt­age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
2
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Connect to a Digital Audio Component. Use an Optical audio cable.
4
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
6
Component Input
Connect a component video/audio device to these jacks.
2
12
13
7
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
8
RGB IN Input
Connect the output from a PC.
9
Antenna Input
Connect antenna or cable to this jack.
10
USB Input
Connect USB storage device to this jack.
11
PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
12
Headphone Socket
Plug the headphone into the headphone socket.
13
Audio/Video Input
Connect audio/video output from an external device to these jacks.
Downloaded From TV-Manual.com Manuals
A-5
PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV.
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
PREPARATION
Only 19/22LD35**, 19/22LD34
**
Only 26/32LD35**, 26/32LD34
**
Carefully place the TV screen side down
1
on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
2
Carefully place the TV screen side down
1
on a cushioned surface to protect the screen from damage.
Assemble the parts of the Stand Body with
2
the Stand Base of the TV.
Stand Body
Stand Base
Assemble the TV as shown.
3
A-6
Downloaded From TV-Manual.com Manuals
Fix the 4 bolts securely using the holes in
4
the back of the TV.
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
Only 19/22LD35**, 19/22LD34
Carefully place the TV screen side down
1
on a cushioned surface to protect the screen from damage.
Loose the bolts from TV.
2
Detach the stand from TV.
3
**
Only 26/32LD35**, 26/32LD34
Insert the Protection Cover into the TV until clicking sound.
Protection Cover
**
PREPARATION
Insert the Protection Cover into the TV.
4
After removing the protection paper from the protection cover, adhere it to the TV as shown.
Downloaded From TV-Manual.com Manuals
Protection Cover
A-7
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■ Image shown may differ from your TV.
PREPARATION
Only 19/22LD35**, 19/22LD34
After connecting the cables as necessary, install
Cable Holder as shown and bundle the cables.
Cable Holder
**
Only 26/32LD35**, 26/32LD34
Connect the cables as necessary.
1
To connect additional equipment, see the External Equipment Setup section.
Open the Cable Management Clip as
2
shown.
**
A-8
Downloaded From TV-Manual.com Manuals
Cable Management Clip
Fit the Cable Management Clip as shown.
3
NOTE
►Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
SWIVEL STAND
(Except for 19/22LD35**, 19/22LD34**)
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
POSITIONING YOUR DISPLAY
(Only 19/22LD35**, 19/22LD34**)
■ Image shown may differ from your TV.
■ Adjust the position of the panel in various ways
for maximum comfort.
ATTACHING THE TV TO A DESK
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
1-Screw ( provided as parts of the product)
(Only 26/32
Stand
Desk
LD35**,
26/32
LD34**)
PREPARATION
• Tilt range
WARNING
►To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
Downloaded From TV-Manual.com Manuals
A-9
PREPARATION
PREPARATION
KENSINGTON SECURITY SYSTEM
■ This feature is not available for all models.
■ Image shown may differ from your TV.
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.
For further information, contact http://www.kens­ington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as note­book PCs and LCD projectors.
NOTE
► The Kensington Security System is an optional
accessory.
► If the TV feels cold to the touch, there may be a
small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
► Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
► Avoid touching the LCD screen or holding your
finger(s) against it for long periods of time. Doing so may produce some temporary distor­tion effects on the screen.
CAREFUL INSTALLATION ADVICE
■ You should purchase necessary components
to fix the TV safety and secure to the wall on the market.
■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid­ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1
2
Use the eye-bolts or TV brackets/bolts to fix the
1
product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen
then bolts.) * Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the
2
wall. Match the height of the bracket that is mounted on the wall.
1
2
2
3
A-10
Downloaded From TV-Manual.com Manuals
Use a sturdy rope to tie the product for align-
3
ment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
NOTE
► When moving the TV undo the cords first. ► Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
► To use the TV safely make sure that the height of
the bracket on the wall and on the TV is the same.
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to tele­phone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL INSTALLATION
■ Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10 cm all around the TV.
NOTE
►Should Install wall mount on a solid wall per-
pendicular to the floor.
►Should use a special wall mount, if you want
to install it to ceiling or slanted wall.
►The surface that wall mount is to be mount-
ed on should be of sufficient strength to sup­port the weight of TV set; e.g. concrete, nat­ural rock, brick and hollow block.
►Installing screw type and length depends on
the wall mount used. Further information, refer to the instructions included with the mount.
►LG is not liable for any accidents or damage
to property or TV due to incorrect installa­tion:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause TV to fall and cause per­sonal injury.
- Not following the recommended Installation method.
10 cm
10 cm
10 cm
PREPARATION
10 cm
10 cm
10 cm
10 cm
10 cm
WALL MOUNT: HORIZONTAL INSTALLATION
■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■ We recommend that you purchase a wall mount-
ing bracket which supports VESA standard.
■ LG recommends that wall mounting be per-
formed by a qualified professional installer.
Model
19/22LD35 26/32LD35 19/22LD34 26/32LD34
** ** ** **
10 cm
VESA
(A * B)
100 * 100 200 * 100 100 * 100 200 * 100
Standard
Screw
M4 M4 M4 M4
Quantity
4 4 4 4
Downloaded From TV-Manual.com Manuals
A-11
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
PREPARATION
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
0 to 9 number
button
LIST
Q.VIEW
MENU
GUIDE
Q. MENU
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(p.95)
It helps you select and set images and sounds when connecting AV devices.(p.50)
External input mode rotate in regular sequence.(►
p.43)
Selects Radio, TV and DTV channel.
Selects a programme. Selects numbered items in a menu.
Displays the programme table. (►
Returns to the previously viewed programme.
Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(►
Shows programme guide.(►
Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(p.18)
p.19)
p.41)
p.86)
1
A-12
Downloaded From TV-Manual.com Manuals
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Coloured
buttons
1
TELETEXT
BUTTONS
SUBTITLE
Allows the user to move return one step in an inter­active application, EPG or other user interaction function.
Clears all on-screen displays and returns to TV viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
Accepts your selection or displays the current mode.
These buttons are used for teletext (on TELETEXT models only), Programme edit.
These buttons are used for teletext. For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
VOLUME UP
/DOWN
FAV
MARK
RATIO
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture. (p.92)
PREPARATION
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
SIMPLINK /
MY MEDIA Menu control buttons
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the next one.
Controls SIMPLINK or MY MEDIA menu(Photo List and Music List).
See a list of AV devices connected to TV. When you toggle this button, the Simplink menu
appears at the screen.(p.46)
Installing Batteries
Downloaded From TV-Manual.com Manuals
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
■ Close cover.
■ To remove the batteries, perform the installation actions in
reverse.
A-13
PREPARATION
PREPARATION
LCD TV MODELS : 32/37/42/47LD4
, 26/32LD32
***
**
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
This item is not included for all models.
* Lightly wipe any stains or fingerprints on the surface of the TV with the polish­ing cloth.
Polishing Cloth
Polishing cloth for
use on the screen.
Do not use excessive force. This may cause scratching or discoloura­tion.
Owner’s Manual
Ferrite Core
(
This item is not included
for all models.
)
Batteries
(AAA)
Remote Control
Power Cord
or
x 8
(M4x20)
(Only 32/37/
42/47LD45**)
Bolts for stand assembly
(M4x24)
(Only 32/37/
42/47LD42**,
26/32LD32
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.
The closer the location of the ferrite core to the power plug, the better it is.
A-14
Downloaded From TV-Manual.com Manuals
x 4
**
1-screw for stand fixing
(Only 32/37/42LD4
)
26/32LD32
**
,
***
)
Protection
Cover
Install the power plug closely.
FRONT PANEL CONTROLS
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
►The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
CAUTION
►Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
►Do not drag the TV. The floor or the product may be damaged.
PREPARATION
Only 32/37/42/47LD45
■ Image shown may differ from your TV.
SPEAKER
**
PROGRAMME
VOLUME
OK
MENU
INPUT
POWER
Downloaded From TV-Manual.com Manuals
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
A-15
PREPARATION
PREPARATION
Only 32/37/42/47LD42**, 26/32LD32
Only 26LD32**
OKINPUT
VOLUME
PROGRAMME
MENUPOWER
**
Only 32/37/42/47LD42**, 32LD32
**
PROGRAMME
SPEAKER
Remote Control Sensor
Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is
switched on.
VOLUME
OK
MENU
INPUT
POWER
A-16
Downloaded From TV-Manual.com Manuals
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
1
1
2
1
Power Cord Socket
3 4 5 6
7 98
This TV operates on an AC power. The volt­age is indicated on the Specifications page.
(► p.137 to 147) Never attempt to operate
the TV on DC power.
2
HDMI/DVI IN Input
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3
OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment.
Connect to a Digital Audio Component. Use an Optical audio cable.
4
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
5
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
6
Component Input
Connect a component video/audio device to these jacks.
10
11
2
12
13
7
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
8
RGB IN Input
Connect the output from a PC.
9
Antenna Input
Connect antenna or cable to this jack.
10
USB Input
Connect USB storage device to this jack.
11
PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
12
Headphone Socket
Plug the headphone into the headphone socket.
13
Audio/Video Input
Connect audio/video output from an external device to these jacks.
PREPARATION
Downloaded From TV-Manual.com Manuals
A-17
PREPARATION
STAND INSTALLATION
■ Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
PREPARATION
Only 32/37/42/47LD45
**
Only 32/37/42/47LD42**,
Carefully place the TV screen side down
1
on a cushioned surface to protect the screen from damage.
Assemble the parts of the Stand Body with
2
the Cover Base of the TV.
Stand Body
Cover Base
Assemble the TV as shown.
3
26/32LD32
Carefully place the TV screen side down
1
on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
2
**
Fix the 4 bolts securely using the holes in
4
the back of the TV.
A-18
Downloaded From TV-Manual.com Manuals
Fix the 4 bolts securely using the holes in
3
the back of the TV.
BACK COVER FOR
ATTACHING THE TV TO A
WIRE ARRANGEMENT
■ Image shown may differ from your TV.
Connect the cables as
1
necessary. To connect additional
equipment, see the EXTERNAL EQUIPMENT SETUP section.
Open the Cable Management Clip as
2
shown.
Cable Management Clip
Fit the Cable Management Clip as shown.
3
DESK
(Only 32/37/42LD4
■ Image shown may differ from your TV.
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
, 26/32LD32**)
***
1-Screw ( provided as parts of the product)
Stand
PREPARATION
NOTE
►Do not use the Cable Management Clip to lift
the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
Desk
WARNING
►To prevent TV from falling over, the TV
should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover.
Insert the Protection Cover into the TV until clicking sound.
Protection Cover
Downloaded From TV-Manual.com Manuals
A-19
PREPARATION
PREPARATION
KENSINGTON SECURITY SYSTEM
■ This feature is not available for all models.
■ Image shown may differ from your TV.
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.
For further information, contact http://www.kens­ington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as note­book PCs and LCD projectors.
NOTE
► The Kensington Security System is an
optional accessory.
► If the TV feels cold to the touch, there may
be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.
► Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.
► Avoid touching the LCD screen or holding
your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
CAREFUL INSTALLATION ADVICE
■ You should purchase necessary components
to fix the TV safety and secure to the wall on the market.
■ Position the TV close to the wall to avoid the
possibility of it falling when pushed.
■ The instructions shown below are a safer way
to set up the TV, by fixing it to the wall, avoid­ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1
2
Use the eye-bolts or TV brackets/bolts to fix the
1
product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen
then bolts.) * Insert the eye-bolts or TV brackets/bolts and
tighten them securely in the upper holes.
Secure the wall brackets with the bolts on
2
the wall. Match the height of the bracket that is mounted on the wall.
1
10 cm
2
2
3
A-20
Downloaded From TV-Manual.com Manuals
Use a sturdy rope to tie the product for align-
3
ment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
NOTE
►When moving the TV undo the cords first. ►Use a platform or cabinet strong and large
enough to support the size and weight of the TV.
►To use the TV safely make sure that the
height of the bracket on the wall and on the TV is the same.
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTAL
NOTE
► Should Install wall mount on a solid wall per-
pendicular to the floor.
► Should use a special wall mount, if you want to
install it to ceiling or slanted wall.
► The surface that wall mount is to be mounted
on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
► Installing screw type and length depends on
the wall mount used. Further information, refer to the instructions included with the mount.
► LG is not liable for any accidents or damage to
property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause TV to fall and cause per­sonal injury.
- Not following the recommended Installation method.
PREPARATION
INSTALLATION
■ Image shown may differ from your TV.
For adequate ventilation allow a clearance of 10 cm all around the TV.
10 cm
10 cm
10 cm
10 cm
WALL MOUNT: HORIZONTAL INSTALLATION
■ We recommend the use of a LG Brand wall
mounting bracket when mounting the TV to a wall.
■ We recommend that you purchase a wall
mounting bracket which supports VESA stan­dard.
■ LG recommends that wall mounting be per-
formed by a qualified professional installer.
10 cm
10 cm
10 cm
Model
32LD4
37/42/47LD4
26/32LD32
10 cm
***
***
**
10 cm
VESA
(A * B)
200 * 100 200 * 200 200 * 100
Standard
Screw
M4 M6 M4
Quantity
4 4 4
SWIVEL STAND
■ Image shown may differ from your TV.
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
Downloaded From TV-Manual.com Manuals
A-21
PREPARATION
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
PREPARATION
(POWER)
ENERGY
SAVING
AV MODE
INPUT
TV/RAD
0 to 9 number
button
LIST
Q.VIEW
MENU
GUIDE
Q. MENU
Switches the TV on from standby or off to standby.
Adjust the Energy Saving mode of the TV.(p.95)
It helps you select and set images and sounds when connecting AV devices.(p.50)
External input mode rotate in regular sequence.(►
p.43)
Selects Radio, TV and DTV channel.
Selects a programme. Selects numbered items in a menu.
Displays the programme table. (►
Returns to the previously viewed programme.
Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(►
Shows programme guide.(►
Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio (or Audio Language), Sleep Timer, Skip Off/ On, USB Device).(p.18)
p.19)
p.41)
p.86)
1
A-22
Downloaded From TV-Manual.com Manuals
BACK
EXIT
INFO i
THUMBSTICK
(Up/Down/Left/Right)
OK
Coloured
buttons
1
TELETEXT
BUTTONS
SUBTITLE
Allows the user to move return one step in an inter­active application, EPG or other user interaction function.
Clears all on-screen displays and returns to TV viewing from any menu.
Shows the present screen information.
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
Accepts your selection or displays the current mode.
These buttons are used for teletext (on TELETEXT models only), Programme edit.
These buttons are used for teletext. For further details, see the ‘Teletext’ section.(
p.130)
Recalls your preferred subtitle in digital mode.
VOLUME UP
/DOWN
FAV
MARK
RATIO
Adjusts the volume.
Displays the selected favourite programme.
Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB
menu.
Selects your desired Aspect Ratio of picture. (p.92)
PREPARATION
MUTE
Programme
UP/DOWN
PAGE UP/
DOWN
SIMPLINK /
MY MEDIA Menu control buttons
Switches the sound on or off.
Selects a programme.
Move from one full set of screen information to the next one.
Controls SIMPLINK or MY MEDIA menu(Photo List and Music List).
See a list of AV devices connected to TV. When you toggle this button, the Simplink menu
appears at the screen.(p.46)
Installing Batteries
Downloaded From TV-Manual.com Manuals
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+with +,-with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used batter-
ies with new ones.
■ Close cover.
■ To remove the batteries, perform the installation actions in
reverse.
A-23
PREPARATION
PREPARATION
LCD TV MODELS : 32/42/46/52/60LD5
***
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
This item is not included for all models.
Owner’s Manual
Power Cord
Batteries
(AAA)
Ferrite Core
(
This item is not included
for all models.
Remote Control
)
Polishing Cloth
Polishing cloth for
use on the screen.
* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
Do not use exces­sive force. This may cause scratching or discolouration.
x 8
M4 x 20
Bolts for stand assembly
Use of ferrite core (This feature is not available for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.
The closer the location of the ferrite core to the power plug, the better it is.
A-24
Downloaded From TV-Manual.com Manuals
1-screw for stand fixing
(Only 32/42LD5
***
)
Protection
Cover
Install the power plug closely.
FRONT PANEL CONTROLS
NOTE
►TV can be placed in standby mode in order to reduce the power consumption. And TV should be
switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
► The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
CAUTION
► Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall.
► Do not drag the TV. The floor or the product may be damaged.
■ Image shown may differ from your TV.
PROGRAMME
PREPARATION
SPEAKER
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is
switched on.
VOLUME
OK
MENU
INPUT
POWER
Remote Control Sensor
Intelligent Sensor Adjusts picture according to the surrounding conditions.
Downloaded From TV-Manual.com Manuals
A-25
PREPARATION
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
PREPARATION
1
1
Power Cord Socket
2
3
98
64 5 7
This TV operates on an AC power. The volt­age is indicated on the Specifications page. (p.137 to 147) Never attempt to operate the TV on DC power.
HDMI/DVI IN Input
2
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
3
RGB IN Input
Connect the output from a PC.
OPTICAL DIGITAL AUDIO OUT
4
Connect digital audio to various types of equipment.
Connect to a Digital Audio Component. Use an Optical audio cable.
5
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
6
Euro Scart Socket (AV1)
Connect scart socket input or output from an external device to these jacks.
7
Component Input
Connect a component video/audio device to these jacks.
11
12
2
13
14
10
8
RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
9
WIRELESS Control
Connect the Wireless Media Box to the WIRELESS CONTROL jack on the TV.
10
Antenna Input
Connect antenna or cable to this jack.
11
USB Input
Connect USB storage device to this jack.
12
PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT.
(This feature is not available in all countries.)
13
Headphone Socket
Plug the headphone into the headphone socket.
14
Audio/Video Input
Connect audio/video output from an external device to these jacks.
A-26
Downloaded From TV-Manual.com Manuals
Loading...
+ 190 hidden pages