LG 24MT57DC-BT Owner’s Manual

Drawn Approved
Signature
Jiyoung.choi Jongok.Kim
MMM/DD/YYYY
Jan/15/2015 Jan/15/2015
24MT47D-PTS LG MFL68901003 AU/FB/FK 24MT47D (1508-REV04)
Signature
Change Contents
ECO Number
N O T E
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
Printed in China
Printed in China
Printed in Thailand
Printed in Vietnam
Printed in Poland
JUN/29/2015
JIYOUNG CHOI
EKMF600643
Adding the new model (24MT47V/28MT47V)
AUG/12/2015
JIYOUNG CHOI
EKMF800052
Changed the weight for 24MT57DC
Change the position of the sentence for disclaimer
EKMF300201
JIYOUNG CHOI
MAR/10/2015
JUN/03/2015
JIYOUNG CHOI
EKMF600108
Adding the new model (24MT57DC)
Printed in Mexico
Printed in Egypt
Printed in India
Printed in Algeria
3. Stock (Paper)
: • Cover
Printed in Mexico
Printed in Indonesia
Printed in Russia
Made by LG Electronics (Only TW Suffix)
:1. Trim size (Format)
2. Printing colors
: • Cover
: • Inside
Printed in Korea
: • Inside
:4. Bindery
Rev. Number
MMM/DD/YYYY
20
148 mm x 210 mm (A5)
1 Color (Black)
1 Color (Black)
Uncoated, wood-free paper 60 g/
Uncoated, wood-free paper 60 g/
Saddle stitching
3. Origin Notification
4. Changes
:LGEVN
(Revision number)
2. Printing Specification
ENG (1)
Checked
Jan/15/2015
Seounggeun.Kim
:Part number
1. Model Description
Printing specification
Printed in Poland
Printed in Kazakhstan
Printed in Brazil
:5. Language
:6. Number of pages
:Model name
:Suffix
:Brand name
:Product name
1
10
9
8
7
6
5
4 3 2
Front Back (Eng)
P/No. 2 19
Pagination sheet
OWNER’S MANUAL
Safety and Reference
LED TV*
*Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future reference.
MT47* MT57*
*MFL68901003*
www.lg.com
P/NO : MFL68901003(1508-REV04)
Printed in Korea
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)
ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and prac tices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
• Changes to certain functionalities of this television (T V Guide, Picture/sound etc) may change the power consumption.
• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the
stated energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the ‘Set-up’ menu.
2
ENGENGLISH
Table of contents
4 Safety precautions
6 Licenses
6 Open source software notice information
6 Preparing
7 Lifting and moving the TV
7 Setting up the TV
7 Using the joystick button
7 Basic functions 8 Adjusting the menu
8 Mounting on a table
8 Adjusting the angle of the TV to suit view 8 Using the kensington security system
9 Mounting on a wall
9 Connections (Notifications)
10 Antenna connection 10 Other connections 10 - Connecting to a PC
11 Remote control
12 Settings
14 To see web manual
15 Maintenance
15 Cleaning your TV 15 - Screen, frame, cabinet, and stand 15 - Power cord 15 Preventing “Image burn” or “Burn-in” on your TV screen
15 Troubleshooting
16 Specifications
19 Environmental information
Service
Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when :
• The power cord or plug is damaged or frayed.
• Liquid has been spilled into the monitor.
• The monitor has been exposed to rain or water.
• The monitor does not operate normally following the operating
instructions. Adjust only those controls that are covered in the operating instructions. An improper adjustment of other controls may result in damage and often requires extensive work by a qualified technician to restore the monitor to normal operation.
• The monitor has been dropped or the cabinet has been damaged.
• The monitor exhibits a distinct change in performance.
• Snapping or popping from the monitor is continuous or frequent
while the monitor is operating. It is normal for some monitors to make occasional sounds when being turned on or off, or when changing video modes.
Do not attempt to service the monitor yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
3
ENG
ENGLISH
Safety precautions
Please read these safety precautions carefully before using the product.
WARNING
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
CAUTION
If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precautions in installing the product
WARNING
• Keep away from heat sources like elec trical heaters.
►Electrical shock, fire, malfunction or deformation may occur.
• Keep the packing anti-moisture material or vinyl packing out of
the reach of children.
►Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
• Do not put heavy objects on the product or sit upon it.
►If the product collapses or is dropped, you may be injured. Children must pay particular attention.
• Do not leave the power or signal cable unattended on the
pathway.
►The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
• Install the product in a neat and dry place.
►Dust or moisture can cause electrical shock, fire or product damage.
• If you can smell smoke or other odors or hear a strange sound
unplug the power cord and contact the service center.
►If you continue to use without taking proper measures, electrical shock or fire can occur.
• If you dropped the product or the case is broken, turn off the
product and unplug the power cord.
► If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
• Do not drop an object on or apply impact to the product. Do not
throw any toys or objects on the product screen.
►It can cause injury to human, problem to product and damage the display.
• Do not let the product fall or drop when connecting it with an
external device.
►This may cause injury and/or damage to the product.
• When connecting it with a game device, keep a distance of four
times as long as the diagonal measurement of the screen from the device.
►If the product falls because of the short cable, this may cause injury and/or damage to the product.
• Leaving a fixed image on the screen for a long time may cause
damage to the screen and cause image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered by the warranty on this product.
• Do NOT install this product on a wall where there is high risk of
exposure to oil fumes or mist.
►This may damage product and cause is to fail.
CAUTION
• Make sure the product ventilation hole is not blocked. Install the
product in a suitably wide place (more than 10 cm from the wall)
►If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
• Do not block the ventilation hole of the product by a tablecloth
or curtain.
►The product can be deformed or fire can break out due to overheating inside the product.
• Install the product on a flat and stable place that has no risk of
dropping the product.
►If the product is dropped, you may be injured or the product may be broken.
• Install the product where no EMI occurs.
• Keep the product away from direct sunlight.
►The product can be damaged.
• If you install the product in a place that does not meet the
recommended conditions, this may cause serious damage to the product's picture quality, life cycle and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.
• Do not install the product in an area with poor ventilation (e.g.on
a bookshelf, in a closet) or outside and avoid placing on cushions or carpets.
• In addition, do not install it where there are heating objects such
as lighting equipment.
Precautions to the AC adapter and electrical power
WARNING
• If water or any foreign substance goes inside the product (TV,
monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center.
►Otherwise, this may cause a fire or electric shock due to damage to the product.
• Do not touch the power plug or AC adapter with wet hands. If the
pins of the plug are wet or dusty, wipe and dry them before use.
►Otherwise, this may cause a fire or electric shock.
4
ENGENGLISH
• Make sure to completely insert the power cord into the AC adapter.
►If loosely connected, the poor connection may cause a fire or electric shock.
• Be sure to use power cords and AC adapters provided or approved
by LG Electronics, Inc.
►The use of non-approved products may cause a fire or electric shock.
• When unplugging the power cord, always pull it by the plug. Do
not bend the power cord with excessive force.
►The power line can be damaged, which may cause electric shock or fire.
• Be careful not to step or place heavy objects (electronic appliances,
clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects.
►Damaged power cords may cause a fire or electric shock.
• Never disassemble, repair or modify the power cord or AC adapter.
►This may cause a fire or electric shock.
• Make sure to connect the power cable to the grounded current.
►You may be electrocuted or injured.
• Use the rated voltage only.
►The product can be damaged, or you may be electrocuted.
• In the presence of thunder and lightning, never touch the power
cord and signal cable because it can be very dangerous.
►It can cause electric shock.
• Do not connect several extension cords, electrical appliances
or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
►A fire can break out due to overheating.
• Do not touch the power plug with wet hands. Additionally, if
the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
►You may be electrocuted due to excess moisture.
• If you don't intend to use the product for a long time, unplug the
power cable from the product.
►Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
• Fix the power cable completely.
►If the power cable is not fixed completely, a fire can break out.
• Do not insert a conductor (like a metal chopstick) into one end
of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.
►You may be electrocuted.
• The appliance coupler is used as the disconnect device.
• Please make sure the device is installed near the wall outlet to
which it is connected and that the outlet is easily accessible.
• As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if the unit is turned off.
CAUTION
• Be sure to keep the outlet, AC adapter, and pins of the power plug
clean from dust and etc.
►This may cause a fire.
• Do not unplug the power cord while the product is in use.
►Electrical shock can damage the product.
• Use only the power cord supplied with the unit. If you use another
power cord, make sure that it is certified by the applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
Precautions in moving the product
WARNING
• Make sure to turn off the product.
►You may be electrocuted or the product can be damaged.
• Make sure to remove all cables before moving the product.
►You may be electrocuted or the product can be damaged.
• Make sure the panel faces forward and hold it with both hands to
move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
• Make sure the product is turned off, unplugged and all cables
have been removed. It may take 2 or more people to carr y larger apparatus. Do not press against or put stress on the front panel of the apparatus.
CAUTION
• Do not shock the product when moving it.
►You may be electrocuted or the product can be damaged.
• Do not dispose the product-packing box. Use it when you move.
Precautions in using the product
WARNING
• Do not disassemble, repair or modify the product at your own
discretion.
►Fire or electric shock accident can occur. ►Contact the service center for check, calibration or repair.
• When the display is to be left unattended for an extended period
of time, unplug it from the wall outlet.
• Keep the product away from water.
►Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the screen with
metallic objects.
►Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
CAUTION
• Do not put or store inflammable substances near the product.
►There is a danger of explosion or fire due to careless handling of the inflammable substances.
• When cleaning the product, unplug the power cord and scrub
gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)
5
Loading...
+ 15 hidden pages