LG 24MS53S, 27MS53S, 24MS53V, 27MS53V Owner's Manual

www.lg.com

OWNER’S MANUAL

LED TV(Smart TV)

24MS53S
27MS53S

24MS53V
27MS53V

LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating the your TV
and retain it for future reference.

ENGLISH

2

ENGLISH

TABLE OF CONTENTS

TABLE OF CONTENTS

3 LICENSES

4 INSTALLATION PROCEDURE

5 ASSEMBLING AND PREPARING

5 Unpacking
7 - Separate purchase
9 Parts and buttons
11 Lifting and moving the TV
12 Setting up the TV
12 - Attaching the Stand
14 - Mounting on a table
15 - Tidying cables
16 - Detaching the Stand
17 - Mounting on a wall

19 WATCHING TV

19 Turning the TV on for the first time

21 MAKING CONNECTIONS

21 Connecting an antenna
22 Satellite connection
23 Connecting to a HD receiver, DVD, VCR

player or Gaming device
23 - HDMI connection
24 - HDMI to DVI connection
25 - Component connection
26 - Composite connection
27 - Euro Scart connection
28 - Headphone connection
29 Connecting to a USB
30 Connecting to a CI Module
31 MHL connection
32 Connecting to a PC
33 - HDMI connection
34 - HDMI to DVI connection

35 REMOTE CONTROL

37 USING THE USER GUIDE

38 MAINTENANCE

38 Cleaning Your TV
38 Screen and frame
38 Cabinet and stand
38 Power cord
39 Preventing “Image burn” or “Burn-in” on

your TV screen

40 TROUBLESHOOTING

40 General

41 SPECIFICATIONS

ENGLISH

3

LICENSES

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby “and the
double-D symbol are trademarks of Dolby Laboratories.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium
content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0
Channel is a trademark of DTS, Inc. Product includes software.

©

DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.

ENGLISH

4

INSTALLATION PROCEDURE

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV.

3

Connect an external device to the TV.



Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.



The available menus and options may differ from the input source or product model that you are
using.



New features may be added to this TV in the future.

NOTE

ENGLISH

5

ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and accessories.



The accessories supplied with your product may vary depending on the model.



Product specifications or contents in this manual may be changed without prior notice due to
upgrade of product functions.

NOTE



Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.

CAUTION



The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.



For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.

NOTE

*A 10 mm
*B 18 mm

A

B

A

B

ENGLISH

6

ASSEMBLING AND PREPARING

Remote control
Batteries (AAA)

Stand Body

CD (Owner's Manual).
Cards

Stand Base

Cable Tie

(See p.35, See p.36)

(See p.12, See p. 16)

(See p.12, See p. 16) (See p.15)

Power Cord.

(See p.14)

AC-DC Adapter.

(See p.14)

Component video cable

Composite audio/video cable

(See p.25)

(See p.26)

(Depending on the country)

Isolator

or

ENGLISH

7

ASSEMBLING AND PREPARING



The illustrations in this manual may differ from the actual product and accessories.



Separate purchase items can be changed or modified for quality improvement without any
notification.



Contact your dealer to buying these items.



The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.

NOTE

Separate purchase

AN-MR400

Magic Remote

(The 3D button on the Magic
Remote Control does not work.)

AN-VC***

Video call camera

FK

YRO

EDFN KRPH

/Q.MENU

ENGLISH

8

ASSEMBLING AND PREPARING

Antenna Isolator Installation Guide

-Use this to install TV in a place where there is a voltage difference between TV Set and GND
of antenna signal.

»If there is a voltage difference between TV Set and GND of antenna signal, the antenna

contact might be heated and excessive heat might cause an accident.

-You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the
wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

-Before starting, be sure that the TV antenna is connected.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a
cable distribution system using coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing
electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

NOTE

ANTENNA/
CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

or

ENGLISH

9

ASSEMBLING AND PREPARING

Parts and buttons

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

Touch button Description

Scrolls through the saved programmes.

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

/ I

Turns the power on or off.

Remote Control Sensor

Standby Light



Lighting On: Turned off



Lighting Off: Turned on

Touch buttons

ENGLISH

10

ASSEMBLING AND PREPARING

HDMI IN

(19 V )

COMPO­NENT IN
AV2 IN /

AUDIO L R

5 V 1.0 A

5 V 0.5 A

13/18 V
700 mA Max
LND IN

HDMI IN

(19 V )

COMPO­NENT IN
AV2 IN /

AUDIO L R

5 V 1.0 A

5 V 0.5 A

13/18 V
700 mA Max
LND IN

Connection panel (See p.21)

24MS53S

27MS53S

24MS53V

27MS53V

ENGLISH

11

ASSEMBLING AND PREPARING



When holding the TV, the screen should face
away from you to prevent the screen from
scratches.



When transporting the TV, do not expose the
TV to jolts or excessive vibration.



When transporting the TV, keep the TV
upright, never turn the TV on its side, or tilt
towards the left or right.

Lifting and moving the TV

When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for save transportation regardless of
its type and size.

Avoid touching the screen at all times, as
this may result in damage to the screen or
some of the pixels used to create images.

CAUTION



It is recommended to move the TV in the
box or packing material that the TV originally
came in.



Before moving or lifting the TV, disconnect
the power cord and all cables.



Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.

ENGLISH

12

ASSEMBLING AND PREPARING

Setting up the TV

Attaching the Stand

If you are not mounting the TV to a wall, use the
following instructions to attach the stand.

1

Place the TV with the screen side down on a

flat and cushioned surface.

2

Attach the Stand Base from Stand Body by

turning the screw to the right with a Coin.



Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.



When attaching the stand to the TV,
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

CAUTION

3

Attach the Stand Base from the TV.

Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.

CAUTION

ENGLISH

13

ASSEMBLING AND PREPARING

CAUTION



Do not carry the monitor upside­down as this may cause it to fall off
its stand, resulting in damage or
injury.



The illustration shows a general
example of installation and may look
different from the actual product.



Do not carry the monitor upside­down by holding the stand body as
this may cause it to fall off, resulting
in damage or injury.



The illustration shows a general
example of installation and may look
different from the actual product.

ENGLISH

14

ASSEMBLING AND PREPARING

Mounting on a table

1

Lift and tilt the TV into its upright position on a

table.

Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.

2

Connect the AC-DC Adapter and Power Cord

to a wall outlet.

Do not place the TV near or on sources of
heat, as this may result in fire or other damage.

CAUTION

When you adjust the angle, do not hold the
buttom of the TV frame as shown on the
following illustration, as may injure your fingers.

WARNING

Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may

occur.

CAUTION

10 cm

10 cm

10 cm

10 cm