Page 1
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
IPS LED MONITOR MODEL
24MP77HM
24MP77SM
27MP77HM
27MP77SM
www.lg.com
Page 2
TABLE OF CONTENTS
2
ENGLISH
CONTENTS
3 LICENSE
4 ASSEMBLING AND PREPAR-
4 Unpacking
6 Parts and buttons
7 - How to Use the Joystick Button
8 Moving and Lifting the Monitor
9 Setting up the Monitor set
9 - Attaching the Stand Base
10 - Detaching the Stand Base
11 - Mounting on a table
11 - Using the cable holder
13 - Mounting on a wall
14 USING THE MONITOR SET
ING
21 CUSTOMIZING SETTINGS
22 Customizing settings
22 - Menu Settings
22 - -Quick Settings
24 - -Picture
26 - -General
27 - -Auto Configuration
28 - -Reset
29 - -Picture mode
30 TROUBLESHOOTING
32 SPECIFICATIONS
36 Preset Modes (Resolution)
36 Indicator
14 Connecting to a PC
14 - D-SUB connection
14 - HDMI connection
15 Connecting to AV Devices
15 - HDMI connection
16 Connecting to External Devices
16 - Peripheral device connection
17 INSTALLING THE LG MONI-
TOR SOFTWARE
17 Installing The Screen Split
19 Installing The LG Color Cloning
37 PROPER POSTURE
37 Proper posture for using the Monitor set.
38 CUD ( COLOR UNIVERSAL
DESIGN) CERTIFICATION
Page 3
LICENSE
3
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ENGLISH
ENG
The following content is only applied to the monitor which is sold in Europe market and which needs to
meet the ErP Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no
adjustment to display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
Page 4
ASSEMBLING AND PREPARING
4
ENGLISH
ENG
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD(Owner's Manual) /
Card
D-SUB Cable
( This cable is not included in all
countries. )
( This cable is not included in all
or
HDMI Cable
countries. )
Power Cord
( Depending on the country )
Stand Body
Stand Base
AC-DC Adapter
AC-DC Adapter
( Depending on the country )
Cable Holder Screws
Page 5
ASSEMBLING AND PREPARING
5
CAUTION
yDo not use any unapproved accessories to ensure the safety and product life span.
yAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yThe accessories supplied with your product may vary depending on the model.
yProduct specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
ENGLISH
ENG
Page 6
ENGLISH
ENG
ASSEMBLING AND PREPARING
6
Parts and buttons
Power Indicator
y On: power is on
y Off: power is off
(Joystick Button)
Connection panel (See p.14~16)
NOTE
yThe joystick button is located at the bottom of the monitor.
Page 7
ASSEMBLING AND PREPARING
7
How to Use the Joystick Button
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with
your finger.
Basic Functions
Press the joystick button once with your finger to turn on the
monitor.
Press and hold the joystick button once with your finger to turn off
the monitor.
You can control the volume by moving the joystick button left/right.
◄/►
Power on
Power off
Volume
Control
ENGLISH
ENG
Page 8
ASSEMBLING AND PREPARING
8
ENGLISH
ENG
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these
instructions to prevent the monitor from being
scratched or damaged and to ensure safe transportation regardless of its shape or size.
yIt is advisable to place the monitor in the
original box or packing material before attempting to move it.
yBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yHold the top and bottom of the monitor frame
firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should
face away from you to prevent it being
scratched.
yWhen moving the monitor, avoid any strong
shock or vibrations to the product.
yWhen moving the monitor, keep it upright,
never turn the monitor on its side or tilt it
sideways.
CAUTION
yAs far as possible, avoid touching the moni-
tor screen. This may result in damage to the
screen or some of the pixels used to create
images.
Page 9
Setting up the Monitor set
Attaching the Stand Base
Place the screen face down.
1
CAUTION
yTo protect the screen from scratches, cover
the surface with a soft cloth.
ASSEMBLING AND PREPARING
Attach the Cable holder.
4
1
Insert the
stand body
2
Press down the
illustration.
cable holder
.
into the hook of the
cable holder
9
ENGLISH
ENG
as shown in
Check the direction of the stand body
2
(front, back) and then mount the stand body
onto the stand hinge.
Tighten two screws into the back of the stand
body .
Screws
Stand Body
Stand Hinge
1
Insert the
3
stand body
2
Tighten the screw to the right.
stand base
.
into the hook of the
Stand Body
Cable holder
1
2
CAUTION
Applying excessive force when tightening
the screws may cause damage to the monitor. Damage caused in this way will not be
covered by the product warranty.
Stand Base
CAUTION
It may hurt your foot off the stand, so be
careful.
Page 10
ASSEMBLING AND PREPARING
10
ENGLISH
ENG
Detaching the Stand Base
Place the screen face down.
1
CAUTION
yTo protect the screen from scratches, cover
the surface with a soft cloth.
1
Turn the screw to the left.
2
2
Pull out the
Stand Body
As shown in the illustration,put your hand on
3
the right groove of cable holder, pull cable
holder out to separate it from the set.
Stand Base
2
Stand Base
.
Remove the two screws on the back of
4
body.
As shown in the illustration, disconnect the
stand body
Stand Hinge
from the
stand hinge.
Stand Body
stand
Screws
CAUTION
yIllustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
yDo not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result
in personal injury.
yWhen lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
yIf you use the monitor panel without the
stand base, its joystick button may cause
the monitor to become unstable and fall,
resulting in damage to the monitor or human
injury. In addition, this may cause the joystick
button to malfunction.
Cable holder
Page 11
ASSEMBLING AND PREPARING
11
Mounting on a table
Lift and tilt the Monitor set into its upright
1
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
Press the joystick button on the bottom of the
3
monitor to turn on the monitor.
CAUTION
Unplug the power cord before moving the
Monitor to another location. Otherwise electric
shock may occur.
Using the cable holder
ENGLISH
ENG
Connect the AC-DC Adapter and Power Cord
2
to a wall outlet.
(19 V )
or
(19 V )
Cable holder
Page 12
ASSEMBLING AND PREPARING
12
ENGLISH
ENG
WARNING
When you adjust the angle, do not hold the
bottom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
Do not touch or press the screen when
adjusting the angle of the monitor.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit
Connect the Kensington security system cable
between the Monitor set and a table.
http://www.kensington.com
.
Do not hold this set like below picture.Monitor
screen can detach from stand base and injure
your body.
NOTE
Tilt from +20 to -3 degrees up or down to adjust
the angle of the Monitor set to suit your view.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.
Front Rear
Page 13
ASSEMBLING AND PREPARING
13
Mounting on a wall
For proper ventilation, allow a clearance of 10 cm
on each side and from the wall. Detailed
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
10 cm
10 cm
If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using a wall
mounting interface (optional parts), attach it
carefully so it will not drop.
1 If you use screw longer than standard, the moni-
tor might be damaged internally.
2 If you use improper screw, the product might be
damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
Model
24MP77HM
24MP77SM
10 cm
10 cm
27MP77HM
27MP77SM
yWall Mount (A x B)
A
B
CAUTION
yDisconnect the power cord first, and then
move or install the Monitor set. Otherwise
electric shock may occur.
yIf you install the Monitor set on a ceiling or
slanted wall, it may fall and result in severe
injury.
yUse only an authorized LG wall mount
and contact the local dealer or qualified
personnel.
y Do not over tighten the screws as this may
cause damage to the Monitor set and void
your warranty.
y Use only screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
yScrew length from outer surface of back
cover should be under 8mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
ENGLISH
ENG
Wall Mount
(A x B)
Standard
screw
Number of
screws
Wall Mount
Plate
(Optional)
75 x 75 100 x 100
M4 x L10
4
RW120
NOTE
yUse the screws that are listed on the VESA
standard screw specifications.
yThe wall mount kit will include an installation
manual and necessary parts.
yThe wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
yThe length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
yFor more information, refer to the
instructions supplied with the wall mount.
Page 14
USING THE MONITOR SET
14
ENGLISH
USING THE MONITOR SET
Connecting to a PC
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
yYour Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
HDMI connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the HDMI cable as shown in
the following illustrations.
NOTE
yWhen using a D-Sub signal input cable
connector for Macintosh
Mac adapter
y
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
NOTE
yIf you use HDMI PC, it can cause compatibility
problem.
yUse a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
yRecommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
Page 15
USING THE MONITOR SET
15
CAUTION
yConnect the signal input cable and
tighten it by turning the screws
clockwise.
yDo not press the screen with your
finger for a long time as this may result in
temporary distortion on the screen.
yAvoid displaying a fixed image on the
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
yWhen you want to use two PC in our Monitor,
please connect the signal cable(D-SUB/
HDMI) respectively in Monitor set.
yIf you turn the Monitor set on while it is cold,
the screen may flicker. This is normal.
ySome red, green, or blue spots may appear
on the screen. This is normal.
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from
your AV devices to the monitor. Connect your AV
device to the monitor with the HDMI cable as illustrated below.
ENGLISH
ENG
NOTE
yIf you use HDMI PC, it can cause compatibility
problem.
yUse a certified cable with the HDMI logo
attached. If you do not use a certified HDMI
cable, the screen may not display or a
connection error may occur.
yRecommended HDMI cable types
- High-Speed HDMI®/TM Cable
- High-Speed HDMI®/TM Cable with Ethernet
Page 16
USING THE MONITOR SET
16
ENGLISH
Connecting to External Devices
Peripheral device connection
Connect peripheral devices to the monitor.
NOTE
yPeripheral devices are sold separately.
yCables with angled plugs may have clear-
ance issues, use straight plugs when possible.
Angle Type Straight Type
NOTE
yHeadphones or speakers may not work nor-
mally, depending on the server PC settings.
Page 17
INSTALLING LG MONITOR SOFTWARE
17
INSTALLING THE LG MONITOR SOFTWARE
Installing The Screen Split
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
Screen Split.
Set the default Web browser to Internet Explorer.
1
Click the "Screen Split" on the CD's main
2
screen. When the file download window
appears, click the Run button. (The file
download window may vary depending on the
operating system and the Internet Explorer
version, but the installation procedures are
same.)
Follow the instructions to proceed with the
3
installation.
Check "I accept the terms of the agreement" on
4
the License Agreement screen and then click
the [Next] button.
ENGLISH
ENG
CAUTION
yService Pack 1 or higher is required for
Windows 7 & Windows 8.
Page 18
ENGLISH
ENG
INSTALLING LG MONITOR SOFTWARE
18
The Screen Split installation starts as shown
5
below.
When the installation is complete, restart your
6
system.
NOTE
yScreen Split: This program automatically
splits the program window as desired.
Monitor Selection only supported in extend
display.
This program supported Windows 7 &
Windows 8.
NOTE
If you run Screen Split, the Screen Split icon [
] appears in the system tray at the right bottom of
the PC screen.
Right-click the Screen Split icon and select a
layout you want.
Page 19
INSTALLING LG MONITOR SOFTWARE
Installing The LG Color Cloning
Insert the the owner's manual CD included in the product package into your PC's CD driver and install the
LG Color Cloning.
The installation screen images are for reference only. The actual installation screen images may vary de
pending on the model.
Set the default Web browser to Internet Explorer.
1
Follow the instructions to proceed with the
3
installation.
19
ENGLISH
ENG
Click the "LG Color Cloning" on the CD's
2
main screen. When the file download window
appears, click the Run button. (The file
download window may vary depending on the
operating system and the Internet Explorer
version, but the installation procedures are
same.)
CAUTION
yService Pack 1 or higher is required for
Windows 7 & Windows 8.
Check the I accept the terms of the agree-
4
ment checkbox on the License Agreement
screen and then click the Next button.
Click the install button.
5
Page 20
INSTALLING LG MONITOR SOFTWARE
20
ENGLISH
ENG
The LG Color Cloning starts the installation as
6
shown below.
Click the complete button.
7
When the installation is complete, restart
8
your system.
NOTE
LG Color Cloning
y
the color quality and brightness of two
monitors using your Smartphone.
: This program matches
NOTE
yDouble-click the LG Color Cloning icon on
des-ktop to run LG Color Cloning Application.
yTo use the LG Color Cloning function, you
must execute both the “LG Color Cloning”
Windows application and the “LG Color
Cloning” android application at the same
time.
yFor details on supported Smartphones and
graphic cards, see the LG Color Cloning
help manual.
INSTALLING THE LG COLOR CLONING APPLI
CATION (ANDROID)
1. Open the playstore on your android phone.
2. Search “LG Color Cloning” on the playstore.
yIf you read the QR code on the first page
of the on “LG Color Cloning” Windows
Application, you can open the download page
of the“LG Color Cloning” android application.
yFor details, see the LG Color Cloning help
manual .
3. Click “install” button.
When the installation of “LG Color Cloning”
Android Application is complete, the LG Color
Cloning icon appears on your “Application”.
Page 21
CUSTOMIZING SETTINGS
21
CUSTOMIZING SETTINGS
Activating the Main Menu
1 Press the joystick button on the bottom of the monitor.
2 Move the joystick up/down (▲/▼) and left/right(◄/►) to set the options.
3 Press the joystick button once more to exit the main menu.
Power Indicator
Joystick Button
Button Menu Status Description
Main menu disabled
Main menu enabled
Main menu disabled
◄
Main menu enabled
Enables the main menu.
Exits the main menu.
(Holding down the button to turn off the monitor: You can turn off
the monitor this way at any time, including when the OSD is on.)
Adjusts the monitor volume level.
Enters the menu features.
ENGLISH
ENG
Main menu disabled
►
Main menu enabled
Main menu disabled
▲
Main menu enabled
Main menu disabled
▼
Main menu enabled
Main Menu Features
Adjusts the monitor volume level.
Operates the Input change.
Enables the main menu.
Enters the picture mode feature.
Enables the main menu.
Turns off the monitor.
Main Menu Description
Menu
Picture Mode
Input
Monitor off
Exit
Configures the screen settings.
Select picture mode to achieve the best display effect.
You can choose the input signal.
• When two input signals are connected, you can select the input
signal (D-SUB/HDMI) you want.
• When only one signal is connected, it is automatically detected.
The default setting is D-SUB.
Turns off the monitor.
Exits the main menu.
Page 22
CUSTOMIZING SETTINGS
22
ENGLISH
ENG
Customizing settings
Menu Settings
-Quick Settings
1 To view the
OSD menu
, press the
bottom of the monitor and then enter the
2 Go to
Quick Settings >
Brightness
3 Configure the options following the instructions that appear in the
bottom right corner.
4 To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until you
exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume Adjusts the volume.
Adjusts the color contrast and brightness of the screen.
joystick button
Menu
at the
.
by moving the joystick.
Description
NOTE
yJog joystick button down (
the Mute function.
Ratio Adjusts the screen ratio.
Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays a video according to the input video signal aspect ratio.
SMART ENERGY
SAVING
SMART ENERGY SAVING:
*
High
Low
Off Disables SMART ENERGY SAVING .
Conserve energy by using luminance compensation algorithm.
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Enables SMART ENERGY SAVING you can save energy with this energy- low efficient
function.
) in the Volume menu will enable/disable
NOTE
yThe display may look the same for Wide, Original options at the recommended resolution (1920 x
1080).
yThe ratio is disabled in the interlaced signal.
Page 23
CUSTOMIZING SETTINGS
23
NOTE
ySaving Data depends on the Panel. So,those values should be different from each panel and panel
vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or
lower depend on source.
y If option of SMART ENERGY SAVING is High or Low, Picture Mode will automatically be Custom and
Color Wizard will automatically be Off.
ENGLISH
ENG
Page 24
ENGLISH
ENG
CUSTOMIZING SETTINGS
24
-Picture
1 To view the
OSD menu
, press the
the bottom of the monitor and then enter the
2 Go to
Picture
by moving the joystick.
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
joystick button
Menu
at
.
Menu > Picture Description
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be ad-
Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want
Reader 2 It is a mode that the screen is adjusted to the best for the cartoon. If you want screen
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
Game Optimizes the screen for gameplay.
Color wizard Red
weakness
Green
weakness
Off It is a mode that Color Wizard mode is off.
justed.
screen more bright, you can control brightness in Menu OSD.
more bright, you can control brightness in Menu OSD.
It is a mode for user who has inability to see red color. It make color weakness user
can easily distinguish red colors.
It is a mode for user who has inability to see green color. It make color weakness user
can easily distinguish green colors.
NOTE
y“Color wizard” feature is not within the scope of CUD certification.
yThis is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen,
please turn off this function.
yThis function can’t distinguish some colors in some images.
yIf option of Color Wizard is not Off , SMART ENERGY SAVING will be Off and Picture Mode will
automatically be Custom.
Page 25
CUSTOMIZING SETTINGS
25
P i c t u re
Adjust
Display Horizontal To move image left and right.
Picture SUPER RESOLU-
TION+
Sharpness Adjusts the sharpness of the screen.
Black Level Sets the offset level (for HDMI only).
Response Time Sets a response time for displayed pictures based on the speed of the
Over Scan To select the range of output image for DTV timing in HDMI input.(only
Color Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2, Off on
Color Temp Selects the factory default picture color.
Six Color Meets the user requirements for colors through adjusting the color and
Reset Returns the color settings to the default settings.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen
size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or
sharpen the image of characters.
High Optimized picture quality is displayed when a user wants
Middle The optimized picture quality is displayed when a user
Low The optimized picture quality is displayed when a user
Off Select this option for everyday viewing. SUPER
yOffset:
High The picture of the screen gets brighter.
Low The picture of the screen gets darker.
screen. For a normal environment, it is recommended that you use Normal. For a fast-moving picture, it is recommended that you use High.
Setting to High may cause image sticking.
High Sets the response time to High.
Middle Sets the response time to Middle.
Low Sets the response time to Low.
Off Sets the response time to Off.
for HDMI input)Recommend overscan function to turn on when connect
AV equipment.
the monitor, high gamma values display whitish images and low gamma
values display blackish images.
If user don't want adjusted gamma, user can select Gamma off.
Warm:
Medium:
Cool:
Custom
Red
Green
Blue
saturation of the six colors(
Green_Saturation, Blue_Hue, Blue_Saturation, Cyan_Hue, Cyan_
Saturation, Magenta_Hue, Magenta_Saturation, Yellow_Hue, Yellow_
Saturation
*Hue: Adjusts tone of the screen.
*Saturation: Adjusts the saturation of the screen colors. The lower the
value, less saturated and bright the colors become. The higher the value,
the more saturated and dark the colors become.
crystal clear images. It is effective forhigh quality video or
game.
wants images between low and highmodes for comfortable
viewing. It is effective for UCC or SD video.
wants smooth and natural images. It iseffective for slowmoving pictures or still images.
RESOLUTION+ is turned off in this mode.
as a reference for a video signal, this is the darkest color the
monitor can display.
Sets the screen color to a reddish tone.
Sets the screen color between a red and blue tone.
Sets the screen color to a bluish tone.
You can customize the picture color using Red, Green,
and Blue colors.
Red_Hue, Red_Saturation, Green_Hue,
) and saving the settings.
ENGLISH
ENG
Page 26
ENGLISH
ENG
CUSTOMIZING SETTINGS
26
-General
.
General
OSD menu
, press the
by moving the joystick.
1 To view the
ton
at the bottom of the monitor and then enter the
Menu
2 Go to
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
joystick but-
Each option is described below.
Menu > General Description
Audio Input To select the input of audio.
Language To choose the language in which the control names are displayed.
Power LED Turns the power indicator on the front side of the monitor on/off.
Automatic Standby The monitor will automatically switch to standby mode after a certain period.
Resolution User can set the desired resolution.This option is enabled only when the screen resolution on
HDMI : Set the input of audio to HDMI input source
Audio-In : Set the input of audio to PC line-in
Auto : Automatically set the input of audio to HDMI or Audio-in
On The power indicator is automatically turned on.
Off The power indicator is turned off.
your computer is set to the following (D-SUB only).
NOTE
The function is enabled only when the screen resolution on your computer is set to the
following, except that the PC output wrong resolution.
24MP77HM
27MP77HM
24MP77SM
27MP77SM
OSD Lock Prevents incorrect key input.
On Key input is disabled.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
NOTE
All functions except for the OSD Lock mode and the Exit button for Brightness, Contrast, Volume, Input, and General are disabled.
Off Key input is enabled.
Page 27
-Auto Configuration
1 To view the
bottom of the monitor and then enter the
2 Go to
3 Configure the options following the instructions that appear in the
bottom right corner.
4 To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
OSD menu
Auto Configuration
, press the
by moving the joystick.
joystick button
Menu
.
at the
CUSTOMIZING SETTINGS
27
ENGLISH
ENG
Each option is described below.
Menu > Auto Configuration Description
Do you want to Auto confuguration?
Yes Operate the Auto configuration for optimal display in D-SUB.
Cancel Cancel the select.
NOTE
yThis function will be enable only in analog input.
Page 28
ENGLISH
ENG
CUSTOMIZING SETTINGS
28
-Reset
1 To view the
ton
at the bottom of the monitor and then enter the
Menu
2 Go to
3 Configure the options following the instructions that
appear in the bottom right corner.
4 To return to the upper menu or set other menu items,
move the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick
to ◄ until you exit.
Each option is described below.
Menu > Reset Description
Do you want to reset your settings?
Reset Returns to the default settings.
Cancel Cancel the select.
OSD menu
.
Reset
by moving the joystick.
, press the
joystick but-
Page 29
CUSTOMIZING SETTINGS
29
-Picture mode
1 Press the joystick button on the bottom of the monitor.
bottom.
Picture mode
Reader 1 It is a mode that the screen is adjusted to the best for the newspaper. If you want
Reader 2 It is a mode that the screen is adjusted to the best for the cartoon. If you want
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
Game Optimizes the screen for gameplay.
by moving the joystick button to ▲.
Description
adjusted.
screen more bright, you can control brightness in Menu OSD.
screen more bright, you can control brightness in Menu OSD.
2 Go to
3 Configure the options following the instructions that appear in the
Each option is described below.
Joystick Button
> Picture Mode
Picture Mode Custom Allows the user to adjust each element. The color mode of the main menu can be
ENGLISH
ENG
NOTE
yIf option of Picture Mode is non-Custom , SMART ENERGY SAVING and Color Wizard will
automatically be Off.
Page 30
TROUBLESHOOTING
30
ENGLISH
ENG
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display
connected?
Is the power indicator light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE"
message on the screen?
Do you see a "NO SIGNAL"
message on the screen?
Can 't you control some functions in OSD?
Do you see “OSD LOCKED” when
you push MENU button?
Can't you select some menu in
OSD?
yCheck and see if the power cord is connected properly to the power
outlet.
yPress the Power button.
yIf the display is in power saving mode, try moving the mouse or
pressing any key on the keyboard to bring up the screen.
yTry to turn on the PC.
yThis message appears when the signal from the PC (video card) is
out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display
again.
yWhen the monitor is on "No-Signal" in 5 minutes, the monitor goes to
DPM mode.
yYou can secure the current control settings, so that they cannot be
inadvertently changed.
yYou can unlock the OSD controls at any time by entering the OSD
lock menu and changing items to off.
Display image is incorrect
Display Position is incorrect.
On the screen background, vertical
bars or stripes are visible.
Any horizontal noise appearing in
any image or characters are not
clearly portrayed.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yEnter the Auto Configuration function and select the "Yes" item to
automatically adjust your display image to the ideal setting.
yCheck Control Panel ► Display ► Settings and adjust the display to
the recommended resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits (true color).
Page 31
TROUBLESHOOTING
CAUTION
yCheck
yIf the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
yThe setting method can differ by computer and O/S (Operation System), and resolution mentioned
Display image is incorrect
The screen color is mono or
abnormal.
The screen blinks.
Control Panel ► Display ► Settings
changed. If yes, readjust the video card to the recommend resolution.
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
yCheck if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
yMake sure the video card is properly inserted in the slot.
ySet the color setting higher than 24 bits (true color) at
► Settings
yCheck if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
and see if the frequency or the resolution were
Control Panel
.
31
ENGLISH
ENG
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
The screen is flickering.
Did you select the recommended
resolution?
yBe sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
yMake sure to check if the video card supports Plug&Play function.
yIf the selected resolution is HDMI
be flickering. Change the resolution to the recommended resolution
1080P
.
1080i
60/50 Hz, the screen may
Page 32
SPECIFICATIONS
32
ENGLISH
ENG
SPECIFICATIONS
24MP77HM 24MP77SM
Display Screen Type Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch 0.2745 mm x 0.2745 mm (Pixel Pitch)
Resolution Max 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Power
Consumption
Power Input 19 V 1.6 A
AC-DC Adapter
Speaker Wattage 5 W + 5 W
Dimensions
(Width x Height x
Depth)
Weight 3.5 kg
Tilt Range -3° to 20°
Environmental
conditions
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type
On Mode : 21 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT:
With Stand 54.2 cm x 42.8 cm x 18.2 cm
Without Stand 54.2 cm x 32.8 cm x 5.2 cm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
19 V 1.7 A
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
Page 33
SPECIFICATIONS
33
Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB)
56 Hz to 61 Hz (HDMI)
Input Form Separate Sync.
Digital
Video Input Signal Input 15 pin D-SUB Connector
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Digital
Plug & Play DDC 2B(Analog)
DDC 2B(HDMI)
24MP77HM
24MP77SM
●
●
●
●
●
●
●
●
●
●
●
ENGLISH
ENG
Page 34
SPECIFICATIONS
34
SPECIFICATIONS
ENGLISH
ENG
27MP77HM 27MP77SM
Display Screen Type Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Pixel Pitch 0.3114 mm x 0.3114 mm (Pixel Pitch)
Resolution Max 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @ 60 Hz
Power
Consumption
Power Input 19 V 1.6 A
AC-DC Adapter
Speaker Wattage 5 W + 5 W
Dimensions
(Width x Height x
Depth)
Weight 4.8 kg
Tilt Range -3° to 20°
Environmental
conditions
Stand Base Attached ( ), Detached (O)
Power cord Wall-outlet type
On Mode : 25 W (ENERGY STAR® standard)*
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC
or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE
OUTPUT:
With Stand 61.4 cm x 46.9 cm x 18.2 cm
Without Stand 61.4 cm x 36.9 cm x 5.2 cm
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
19 V 1.7 A
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
Page 35
SPECIFICATIONS
35
Sync Input Horizontal Frequency 30 kHz to 83 kHz (Automatic)
Vertical Frequency 56 Hz to 75 Hz (D-SUB)
56 Hz to 61 Hz (HDMI)
Input Form Separate Sync.
Digital
Video Input Signal Input 15 pin D-SUB Connector
HDMI Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Digital
Plug & Play DDC 2B(Analog)
DDC 2B(HDMI)
27MP77HM
27MP77SM
●
●
●
●
●
●
●
●
●
●
●
ENGLISH
ENG
Page 36
ENGLISH
ENG
SPECIFICATIONS
36
Preset Modes (Resolution)
D-SUB Timing
Display Modes (Resolution)
720 x 400 31.468 70 -/+
640 x 480 31.469 60 -/-
640 x 480 37.500 75 -/-
800 x 600 37.879 60 +/+
800 x 600 46.875 75 +/+
1024 x 768 48.363 60 -/-
1024 x 768 60.023 75 +/+
1152 x 864 67.500 75 +/+
1280 x 1024 63.981 60 +/+
1280 x 1024 79.976 75 +/+
1680 x 1050 65.290 60 -/+
1920 x 1080 67.500 60 +/+ Recommend Mode
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Polarity(H/V)
HDMI Timing
Factory support mode
(Preset Mode)
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
1080P 67.50 60
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
HDMI
O
Recommend Mode
Indicator
Mode LED Color
On Mode White (Only 15 seconds)
Sleep Mode Blinking White
Off Mode Off
Page 37
PROPER POSTURE
37
PROPER POSTURE
Proper posture for using the Monitor set.
Adjust the
Monitor set and
your posture to
allow you to view
images at the
optimal viewing
angle.
Place your hands
gently on the
keyboard, keeping
your arms bent at
the elbows and
horizontally outright.
ENGLISH
ENG
Adjust the location of the
Monitor set to avoid it
reflecting light.
Page 38
Color Universal Design
38
ENGLISH
CUD ( COLOR UNIVERSAL DESIGN) CERTIFICATION
Color Universal Design is a user-oriented optimum design of coloring patterns or character shapes ,
to allow information to be accurately conveyed to all the people.
The colors of OSD Menu and User’s Manual have been designed in consideration of the colorblind
people for convenient operation.
As to OSD Menu and User’s Manual, LG Electronics has passed the certification of the non-profit Color
Universal Design Organization (CUDO).
What’s CUD mark?
The Color Universal Design mark is received from the non-profit Color Universal Design
Organization (CUDO)when the Monitor is certified to be able to convey information to the
colorblind people by giving consideration of coloring patterns or character shapes.
CUDO Official Website: http://www.cudo.jp/summary/cudo_e
Page 39
Declaration of Conformity
Trade Name: LG
Model : 24MP77HM,27MP77HM, 24MP77SM,
27MP77SM
Responsible Party: LG Electronics Inc.
Address : 1000 Sylvan Ave. Englewood Cliffs
NJ 07632 U.S.A
TEL: 201-266-2534
*above information is only for USA FCC Regulatory
Make sure to read the Safety Precautions before
using the product.
Keep the Owner’s Manual (CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE
U. S. A.,Inc. has determined that this
product meets the ENERGY STAR
guidelines for energy efficiency.
Refer to ENERGY STAR.gov for more
information on the ENERGY STAR program.
Loading...